STB14NK60Z,
STP14NK60Z, STW14NK60Z
N-channel 600 V, 0.45
Ω
typ., 13.5 A SuperMESH™
Power MOSFETs in I
2
PAK, TO-220 and TO-247 packages
Datasheet
-
obsolete product
TAB
I
2
PAK
1
2
3
TO-247
TAB
TO-220
1
2
3
Features
Order codes V
DS
R
DS(on) max.
I
D
P
TOT
STB14NK60Z-1
STP14NK60Z 600 V 0.5
Ω
13.5 A 160 W
STW14NK60Z
•
•
•
•
•
•
Extremely high dv/dt capability
100% avalanche tested
Gate charge minimized
Very low intrinsic capacitances
Very good manufacturing repeatability
Zener-protected
Figure 1. Internal schematic diagram
D(2, TAB)
•
Applications
Switching applications
Description
G(1)
S(3)
AM01476v1
These devices are N-channel Zener-protected
Power MOSFETs developed using
STMicroelectronics' SuperMESH™ technology, achieved through optimization of ST's well established strip-based PowerMESH™ layout. In addition to a significant reduction in onresistance, this device is designed to ensure a high level of dv/dt capability for the most demanding applications.
Obsolete Product(s) - Obsolete Product(s)
Table 1. Device summary
Order codes Marking Package Packaging
I
2
PAK STB14NK60Z-1 B14NK60Z
Tube STP14NK60Z
STW14NK60Z
P14NK60Z
W14NK60Z
TO-220
TO-247
May 2014
This is information on a discontinued product.
DocID8984 Rev 8 1/19 www.st.com
3
4
1
2
Contents
Contents
5
STB14NK60Z, STP14NK60Z, STW14NK60Z
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1
I
2
PAK, STB14NK60Z . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.2
TO-220, STP14NK60Z . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.3
TO-247, STW14NK60Z . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Obsolete Product(s) - Obsolete Product(s)
2/19 DocID8984 Rev 8
STB14NK60Z, STP14NK60Z, STW14NK60Z Electrical ratings
Symbol
Table 2. Absolute maximum ratings
Parameter
V
DS
V
DGR
V
GS
I
D
I
DM
P
I
D
(1)
TOT
ESD
Drain-source voltage
Drain-gate voltage (R
GS
Gate-source voltage
= 20 k
Ω
)
Drain current (continuous) at T
C
= 25°C
Drain current (continuous) at T
C
=100°C
Drain current (pulsed)
Total dissipation at T
C
= 25°C
Derating factor
Gate-source human body model
(R= 1.5 k
Ω,
C= 100pF)
Peak diode recovery voltage slope dv/dt
(2)
T
J
T stg
Operating junction temperature
Storage temperature
1.
Pulse width limited by safe operating area
2.
I
SD
≤
13.5A, di/dt
≤
200A/ μ s, V
DD
≤
V
(BR)DSS
, T j
≤
T
JMAX .
Value
4
4.5
-55 to 150
600
600
± 30
13.5
8.5
54
160
1.28
Table 3. Thermal data
Parameter Symbol
R thj-case
R thj-amb
Thermal resistance junction-case max
Thermal resistance junction-ambient max
Value
0.78
62.5
Symbol
I
AS
Table 4. Avalanche characteristics
Parameter Value
Avalanche current, repetitive or notrepetitive (pulse width limited by T j max
)
12
E
AS
(starting T j
=25°C, I
D
=I
AR
, Vdd=50 V)
Unit
°C/W
°C/W
Unit
A mJ
Unit
V
V
V
A
A
A
W
W/°C kV
V/ns
°C
DocID8984 Rev 8 3/19
19
Electrical characteristics STB14NK60Z, STP14NK60Z, STW14NK60Z
(T
CASE
=25°C unless otherwise specified)
Symbol Parameter
Table 5. On/off states
Test conditions
V
(BR)DSS
Drain-source breakdown voltage
I
D
= 1 mA, V
GS
= 0
I
DSS
Zero gate voltage drain current (V
GS
= 0)
I
GSS
Gate body leakage current
(V
DS
= 0)
Gate threshold voltage V
GS(th)
R
DS(on)
Static drain-source on resistance
V
DS
V
DS
= 600 V
= 600 V, T
V
GS
= ±30 V
C
=125°C
V
DS
= V
GS
, I
D
= 100 μ A
V
GS
= 10 V, I
D
= 6 A
Min.
Typ.
Max.
Unit
600
3 3.75
0.45
1
50
4.5
0.5
V
μ A
μ A
± 10 μ A
V
Ω
Symbol Parameter
Table 6. Dynamic
Test conditions Min.
Typ.
Max.
Unit
C iss
C oss
Input capacitance
Output capacitance
C rss
Reverse transfer capacitance
C oss eq
(1)
.
Equivalent output capacitance
V
V
V
DS
GS
GS
=25V, f=1 MHz,
=0
=0, V
DS
=0 V to 480 V
-
-
-
-
2220
240
57
122
-
-
-
pF pF pF pF
Q g
Q gs
Q gd
Total gate charge
Gate-source charge
Gate-drain charge
V
V
DD
GS
=480 V, I
=10 V
D
= 12 A
-
-
75
13.2
38.6
-
-
nC nC nC
1.
C oss eq.
is defined as a constant equivalent capacitance giving the same charging time as C oss
when V
DS inceases from 0 to 80% V
DSS
Obsolete Product(s) - Obsolete Product(s)
4/19 DocID8984 Rev 8
STB14NK60Z, STP14NK60Z, STW14NK60Z Electrical characteristics
Symbol t d(on) t r t d(off) t f t r(Voff) t f t c
Parameter
Turn-on delay time
Rise time
Turn-off delay time
Fall time
Off-voltage rise time
Fall time
Cross-over time
Table 7. Switching times
Test conditions
V
DD
=300 V, I
D
=6 A,
R
G
=4.7
Ω,
V
GS
=10 V
(see Figure 17)
V
DD
=480 V, I
D
=12A,
R
G
=4.7
Ω,
V
GS
=10V
(see Figure 19)
Min.
Typ.
Max.
Unit
-
-
-
-
-
-
26
18
62
13
12
9.5
22 -
-
-
-
-
-
ns ns ns ns ns ns ns
Parameter
Table 8. Source drain diode
Test conditions Symbol
I
SD
I
SDM
(1)
V
SD
(2) t rr
Q rr
I
RRM t rr
Q rr
I
RRM
Source-drain current
Source-drain current (pulsed)
Forward on voltage
Reverse recovery time
Reverse recovery charge
Reverse recovery current
Reverse recovery time
Reverse recovery charge
Reverse recovery current
1.
Pulse width limited by safe operating area
2.
Pulsed: pulse duration=300 μ s, duty cycle 1.5%
I
SD
=12 A, V
GS
=0
I
SD
=12 A, di/dt = 100 A/ μ s,
V
DD
=50 V
I
SD
=12 A, di/dt = 100 A/ μ s,
V
DD
=50 V, T j
=150 °C
-
-
-
-
-
-
-
-
-
Min Typ.
Max Unit
12
48
1.6
490
4.7
19.3
664
6.8
20.5
μ C
A ns
μ C
A
A
A
V ns
Obsolete Product(s) - Obsolete Product(s)
DocID8984 Rev 8 5/19
19
Electrical characteristics STB14NK60Z, STP14NK60Z, STW14NK60Z
Symbol
Table 9. Gate-source Zener diode
Parameter Test conditions
V
(BR)GSO
Gate-source breakdown voltage I
GS
= ± 1mA, I
D
=0
Min Typ.
Max.
Unit
30 V
The built-in back-to-back Zener diodes have specifically been designed to enhance the device's ESD capability. In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device's integrity. These integrated
Zener diodes thus avoid the usage of external components.
Obsolete Product(s) - Obsolete Product(s)
6/19 DocID8984 Rev 8
STB14NK60Z, STP14NK60Z, STW14NK60Z Electrical characteristics
Figure 2. Safe operating area for I
2
PAK and
TO-220
Figure 3. Thermal impedance for I
2
PAK and
TO-220
Figure 4. Safe operating area for TO-247 Figure 5. Thermal impedance for TO-247
Figure 6. Output characteristics Figure 7. Transfer characteristics
Obsolete Product(s) - Obsolete Product(s)
DocID8984 Rev 8 7/19
19
Electrical characteristics
Figure 8. Transconductance
STB14NK60Z, STP14NK60Z, STW14NK60Z
Figure 9. Static drain-source on-resistance
Figure 10. Gate charge vs gate-source voltage Figure 11. Capacitance variations
Figure 12. Normalized gate threshold voltage vs temperature
Figure 13. Normalized on-resistance vs temperature
Obsolete Product(s) - Obsolete Product(s)
8/19 DocID8984 Rev 8
STB14NK60Z, STP14NK60Z, STW14NK60Z
Figure 14. Source-drain diode forward characteristics
Electrical characteristics
Figure 15. Normalized V
(BR)DSS
vs temperature
(BR)
Figure 16. Maximum avalanche energy vs temperature
Obsolete Product(s) - Obsolete Product(s)
DocID8984 Rev 8 9/19
19
STB14NK60Z, STP14NK60Z, STW14NK60Z Test circuits
3 Test circuits
Figure 17. Switching times test circuit for resistive load
Figure 18. Gate charge test circuit
V
DD
12V
47k
Ω
100nF
1k Ω
V
GS
V
D
R
G
R
L
D.U.T.
2200
μ
F
3.3
μ
F
V
DD
V i
=20V=V
GMAX
2200
μ F
I
G
=CONST
2.7k
Ω
100 Ω
D.U.T.
V
G
P
W
AM01468v1
Figure 19. Test circuit for inductive load switching and diode recovery times
47k
Ω
P
W
1k
Ω
AM01469v1
Figure 20. Unclamped inductive load test circuit
25 Ω
G
D
A
D.U.T.
S
B
R
G
A
FAST
DIODE
A
B
B
G
D
S
L=100 μ H
3.3
μ F
1000
μ F
V
DD
V i
V
D
I
D
L
D.U.T.
2200
μ F
3.3
μ F
V
DD
P w
AM01470v1 AM01471v1
Figure 21. Unclamped inductive waveform
V
(BR)DSS
V
D
Figure 22. Switching time waveform t on td on t r t off td off t f
Obsolete Product(s) - Obsolete Product(s)
I
DM
90%
90%
10%
10% V
DS
I
D 0
V
DD
V
DD
90%
V
GS
0
10%
AM01472v1 AM01473v1
10/19 DocID8984 Rev 8
STB14NK60Z, STP14NK60Z, STW14NK60Z
4 Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
® specifications, grade definitions and product status are available at: www.st.com
.
ECOPACK
®
is an ST trademark.
Obsolete Product(s) - Obsolete Product(s)
DocID8984 Rev 8 11/19
19
Package mechanical data STB14NK60Z, STP14NK60Z, STW14NK60Z
4.1 I
2
PAK, STB14NK60Z
Figure 23. I²PAK (TO-262) drawing
0004982_Rev_H
Obsolete Product(s) - Obsolete Product(s)
12/19 DocID8984 Rev 8
STB14NK60Z, STP14NK60Z, STW14NK60Z
DIM.
c c2
D e
A
A1 b b1 e1
E
L
L1
L2
Package mechanical data
Table 10. I²PAK (TO-262) mechanical data mm.
min.
typ
4.40
2.40
0.61
1.14
0.49
1.23
8.95
2.40
4.95
10
13
3.50
1.27
max.
4.60
2.72
0.88
1.70
0.70
1.32
9.35
2.70
5.15
10.40
14
3.93
1.40
Obsolete Product(s) - Obsolete Product(s)
DocID8984 Rev 8 13/19
19
Package mechanical data STB14NK60Z, STP14NK60Z, STW14NK60Z
Figure 24. TO-220 type A drawing
Obsolete Product(s) - Obsolete Product(s)
BW\SH$B5HYB7
14/19 DocID8984 Rev 8
STB14NK60Z, STP14NK60Z, STW14NK60Z
Dim.
L
L1
L20
L30
∅
P
Q e1
F
H1
J1
D
D1
E e
A b b1 c
Package mechanical data
10
2.40
4.95
1.23
6.20
2.40
13
3.50
Table 11. TO-220 type A mechanical data mm
Min.
Typ.
4.40
0.61
1.14
0.48
15.25
1.27
16.40
28.90
3.75
2.65
3.85
2.95
Max.
4.60
0.88
1.70
0.70
15.75
10.40
2.70
5.15
1.32
6.60
2.72
14
3.93
Obsolete Product(s) - Obsolete Product(s)
DocID8984 Rev 8 15/19
19
Package mechanical data STB14NK60Z, STP14NK60Z, STW14NK60Z
Figure 25. TO-247 drawing
0075325_G
Obsolete Product(s) - Obsolete Product(s)
16/19 DocID8984 Rev 8
STB14NK60Z, STP14NK60Z, STW14NK60Z
Dim.
b2 c
D
E
A
A1 b b1 e
L
L1
L2
∅
P
∅
R
S
Table 12. TO-247 mechanical data mm.
Min.
Typ.
4.85
2.20
1.0
2.0
3.0
0.40
19.85
15.45
5.30
14.20
3.70
5.45
18.50
3.55
4.50
5.30
5.50
Package mechanical data
Max.
5.15
2.60
1.40
2.40
3.40
0.80
20.15
15.75
5.60
14.80
4.30
3.65
5.50
5.70
Obsolete Product(s) - Obsolete Product(s)
DocID8984 Rev 8 17/19
19
Revision history STB14NK60Z, STP14NK60Z, STW14NK60Z
Date
30-Aug-2004
17-Aug-2005
08-Sep-2005
14-Oct-2005
26-Jul-2006
06-May-2014
Revision
Table 13. Document revision history
Changes
3
4
5
6
7
8
Preliminary version
Complete version with curves
Inserted ecopack indication
New package inserted: TO-247
New template, no content change
– Updated:
Figure 17
,
18
,
19
and
20
– Updated:
Section 4: Package mechanical data
– Minor text changes
– The part number STP14NK60ZFP has been moved to a separate datasheet
Obsolete Product(s) - Obsolete Product(s)
18/19 DocID8984 Rev 8
STB14NK60Z, STP14NK60Z, STW14NK60Z
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS
OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT
PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
Obsolete Product(s) - Obsolete Product(s)
© 2014 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
DocID8984 Rev 8 19/19
19
