STN93003
High voltage fast-switching
PNP power transistor
Features
■
■
High voltage capability
Very high switching speed
Application
■ Electronics ballasts for fluorescent lighting
Description
The device is manufactured using high voltage multi-epitaxial planar technology for high switching speeds and high voltage capability. It uses a cellular emitter structure with planar edge termination to enhance switching speeds while maintaining the wide RBSOA. The STN93003 is expressly designed for a new solution to be used in compact fluorescent lamps, where it is coupled with the STN83003, its complementary NPN transistor.
4
1
2
3
SOT-223
I
Figure 1.
Internal schematic diagram
Table 1.
Device summary
Part Number Marking
STN93003 N93003
November 2010
Package
SOT-223
Doc ID 12329 Rev 2
Packaging
Tape and reel
1/11 www.st.com
11
STN93003
3
4
Contents
1
2
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2
Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2/11 Doc ID 12329 Rev 2
STN93003 Electrical ratings
Table 2.
Symbol
V
CES
V
CEO
V
EBO
I
C
I
CM
I
B
I
BM
P
TOT
T
STG
T
J
Absolute maximum ratings
Parameter
Collector-emitter voltage (V
BE
= 0)
Collector-emitter voltage (I
B
= 0)
Emitter-base voltage
(I
C
= 0, I
B
= 0.75 A, t
P
< 10 µs)
Collector current
Collector peak current (t
P
< 5 ms)
Base current
Base peak current (t
P
< 5 ms)
Total dissipation at T a
= 25 °C
Storage temperature
Max. operating junction temperature
Table 3.
Symbol
Thermal data
Parameter
R thJA
Thermal resistance junction-ambient
1.
Device mounted on PCB area of 1 cm².
(1)
_ max
Value
-500
-400
V
(BR)EBO
-1.5
-3
-0.75
-1.5
1.6
-65 to 150
150
Unit
V
V
V
A
W
°C
°C
A
A
A
Value
78
Unit
°C/W
Doc ID 12329 Rev 2 3/11
Electrical characteristics STN93003
T case
= 25 °C unless otherwise specified.
Table 4.
V
V
Symbol
V
I
CES
(BR)EBO
V
CE(sus)
(1)
CE(sat)
(1)
BE(sat)
(1)
Electrical characteristics
Parameter Test conditions
Collector cut-off current
(V
BE
= 0)
V
CE
= -500 V
V
CE
= -500 V T
C
= 125 °C
Emitter-base breakdown voltage
(I
C
= 0)
Collector-emitter sustaining voltage
(I
B
= 0)
I
I
E
C
= -10 mA
= -10 mA
Collector-emitter saturation voltage
I
C
= -0.35 A I
B
= -50 mA
I
C
= -0.5 A I
B
= -0.1 A
Base-emitter saturation voltage
I
C
= -0.5 A I
B
= -0.1 A
-5
-400 h
FE
DC current gain
I
C
= -10 mA V
CE
= -5 V
I
C
= -0.35 A V
CE
= -5 V
I
C
= -1 A V
CE
= -5 V t t t r s t s t f f
Resistive load
Rise time
Storage time
Fall time
Inductive load
Storage time
Fall time
I
I
C
= -0.35 A V
CC
= 125 V t
I
B1
P
= - I
B2
≥
25 µs
= -70 mA
C
V
V
= 0.5 A I
BE(off)
Clamp
= 300 V
B1
= 0.1 A
= - 5 V L = 10 mH
E sb
Avalanche energy
I
L = 4 mH 25 °C< T
C
BR
< 125 °C
≤
-2.5 A C = 1.8 nF
1.
Pulse test: pulse duration
≤
300 µs, duty cycle
≤
2 %.
Min.
Typ.
Max.
Unit
10
16
4
1.5
12
25
90
2.2
0.1
400
40
-1
-5
-10
-0.5
-0.5
-1
32
2.9
mA mA
V
V
V
V
V ns
µs
µs ns ns mJ
4/11 Doc ID 12329 Rev 2
STN93003 Electrical characteristics
Figure 2.
Safe operating area Figure 3.
Derating curve
Figure 4.
DC current gain (V
CE
= - 5 V) Figure 5.
DC current gain (V
CE
= - 1 V)
Figure 6.
Collector-emitter saturation voltage
Figure 7.
Base-emitter saturation voltage
Doc ID 12329 Rev 2 5/11
Electrical characteristics
Figure 8.
Resistive load fall time
STN93003
Figure 9.
Resistive load storage time
Figure 10.
Inductive load fall time Figure 11.
Inductive load storage time
Figure 12.
Reverse biased SOA
6/11 Doc ID 12329 Rev 2
STN93003
Figure 13.
Inductive load switching test circuit
Electrical characteristics
1.
Fast electronic switching
2.
Non-inductive resistor
3.
Fast recovery rectifier
Figure 14.
Resistive load switching test circuit
1.
Fast electronic switching
2.
Non-inductive resistor
Doc ID 12329 Rev 2 7/11
Package mechanical data
3 Package mechanical data
STN93003
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
® specifications, grade definitions and product status are available at: www.st.com
.
ECOPACK
®
is an ST trademark.
8/11 Doc ID 12329 Rev 2
STN93003
Dim.
H
V
D e e1
E
A
A1
B
B1 c
Package mechanical data
Min.
S
OT-22
3
mechanical data
mm.
Typ.
0.02
0.60
2.
9 0
0.24
6.
3 0
3 .
3 0
6.70
0.70
3 .00
0.26
6.50
2.
3 0
4.60
3 .50
7.00
Max.
1.
8 0
0.1
0.
8 5
3 .15
0.
3 5
6.70
3 .70
7.
3 0
10 o
Doc ID 12329 Rev 2
0046067_M
9/11
Revision history
Table 5.
Date
11-May-2006
29-Nov-2010
Revision history
Revision
1
2
Changes
Initial release.
Updated package mechanical data on page 9 .
STN93003
10/11 Doc ID 12329 Rev 2
STN93003
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2010 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
Doc ID 12329 Rev 2 11/11
