advertisement
![TECSHOW FloorTEC The world-leader LED Dance Floor User Manual | Manualzz TECSHOW FloorTEC The world-leader LED Dance Floor User Manual | Manualzz](http://s3.manualzz.com/store/data/064413909_1-bff6aa16d6561d18cb50c9f7503bada7-360x466.png)
USER MANUAL
Our LED Dancing Floor lighting system offers many possibilities to achieve the effects which you want. It is designed for professional places, such as stages, disco, night clubs etc. Please read the manual before operation.
A. SPECIFICATION :
Size: 100x100x9.5cm
Weight: 48kgs
Power in:110-130V /60HZ
Power consumption: 80W
LEDs: R360pcs, G360pcs, B360pcs
8 color section in one
15 mm Plexi glass support up to 550kgs
4 digital Led display for easier operation
3 pin XLR Power in/out
Height adjustable
Selectable built-in programs, Auto running, DMX mode , slave mode, sound-activated.
Selectable 3CH 6CH 、 、
B. 1, the picture of front side
15 mm
80 mm
Height adjustable
Rubber
POWER SUPPLY INPUT OUTPUT
AC120V/60HZ
240V/50HZ
FUSE 1A
1=GND 2=SIG 3=SIG
DMX512 SIGNAL
MIC
MODE SET UP UP DOWN
C. OPERATION:
After power on, Press “MODE” button to activate the main menu: Built-in program, Auto run, DMX mode, Slave mode, sound mode.
“SETUP” is to set the relative specification for current mode.
“UP” is to add the value of current specification.
“DOWN” is to decrease the value of current specification.
Built-in programs-- running one of 12 built-in programs.
Auto run—running built-in programs one after another in continuous loop.
DMX mode--controlled by DMX controller
Slave mode—the projectors in this mode will be synchronously run with the projectors in master mode.
Sound mode-- running by sound - activated.
1. Built-in programs mode
With LED dancing floor 100x100cm yon can select 12 different Programs. Press“SETUP” and “UP”
“DOWN” buttons to select the programs ( ) and select the desired program value 。
For example,
When it shows , press “SETUP” button for the first time, it will show , you can set the running speed for this program. Press “SETUP” button for the second time, it will show , then you can set the flash frequency for it.. for this PG01, if press “SETUP” for the third time, it will show: C1-1 or C2-1, you can select one of the seven colors by up and down.
SP- speed 00-99
FS—flash frequency from 00-99
2. Auto run mode
You can press “MODE” button to select auto run mode, it shows , then you can press
“SETUP” button, it shows , then you can set the running times by “UP” and “DOWN”.
Press “SETUP” button for the second time, it will show , you can set the running speed for this program. Press “SETUP” button , it will show , then you can set the flash frequency for it.
3. DMX mode
You can control the devices individually via your DMX-controller. Press “MODE” button, when it is
, it is DMX mode. Press “SETUP” button, it shows , this means DMX address is
001, you can set the DMX address by “UP” and “DOWN” buttons. If press “SETUP” button, it will show: or or 13.CH.
or , it means the LED dancing panel is in which
DMX mode. You can switch these DMX modes by “UP” and “DOWN” buttons.
DMX value as follows:
03CH :
CH1
0-255
CH2
0-255
CH3
0-255
R G B
06CH :
CH1
0-255
R1
CH2
0-255
G1
CH3
0-255
B1
CH4
0-255
R2
CH5
0-255
G2
CH6
0-255
B2
13CH :
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13
0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255
R1 G1 B1 R2 G2 B2 R3 G3 B3 R4 G4 B4 Dim
25CH :
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12
0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255
R1 G1 B1 R2 G2 B2 R3 G3 B3 R4 G4 B4
CH13 CH14 CH15 CH16 CH17 CH18 CH19 CH20 CH21 CH22 CH23 CH24 CH25
0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255
R5 G5 B5 R6 G6 B6 R7 G7 B7 R8 G8 B8 Dim
4. Slave mode
Press “MODE” button to select to run the slave mode.
5. Sound mode
Press “MODE” button to select to be run, now if activated one time, it will run one step, adjust the sensitivity by “UP” and “DOWN” buttons. Press “SETUP” button, it will show: this is sound mode 1: activated one time, running one step, the color is static; select sound mode 2 by “UP”and“DOWN” buttons, it shows: , activated one time, running one step, the color will dim gradually.
Sensitivity: SO01-SO31
Q
LI
A
T
Y
&
G
O
O
D
P
ERFORMA
N
CE
I N L
I GH
T
G
TRUSTING RESULTS
www.american-pro.com
AMERICAN PRO develops & improves products constantly.
For this reason, the specifications and consigned information in the present user manual can be modified without notice.
advertisement
Related manuals
advertisement