Harley Benton Talk Box Quick Start Guide

Add to my manuals
1 Pages

advertisement

Harley Benton Talk Box Quick Start Guide | Manualzz

User manual

This manual contains important information on the safe operation of the product.

Read and follow the safety advice and instructions given. Retain the manual for future reference. If you pass the product on to others please include this manual.

EN

Talk Box

Safety instructions

Intended use

This product is meant to be used as an effects unit for E guitar or keyboard. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.

Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts from the product. They could swallow the pieces and choke! and choke! Never let children unattended use electrical devices.

Where to use the product

Never use the product

• in conditions of extreme temperature or humidity

• in extremely dusty or dirty areas

• at locations where the unit can become wet

General handling

• To prevent damage, never use force when handling the product.

• Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents.

Operating elements

1 Opening for connecting the hose.

2 TONE: control to adjust the desired tone.

3 DRIVE: control to set the desired input gain.

4 TO AMP: indicator LED, shows that the input signal is not processed by the device and is directly fed to the amplifier.

5 Foot switch to turn the device function on / off.

6 POWER: indicator LED, shows that the device is powered.

7 OUTPUT: volume control of the Talk Box.

8 IN: 1/4" jack socket to connect the instrument.

9 12 V  : Connection for the supplied power adapter for power supply.

10 TO AMP: 1/4" jack output to connect an amplifier.

Using the product

1. Insert one end of the supplied hose into the device opening q . Use the supplied Velcro strap to attach the hose to the microphone you want to use so that the other end is a few inches in front of the microphone basket.

2. Connect the instrument to the input jack i via a jack cable.

3. If the signal is also to be heard unaffected by the Talk Box, connect a suitable amplifier to the TO AMP socket a via a jack cable.

4. Connect the plug of the AC adapter cable to the 12 V socket o

and plug the AC adapter into a mains socket. The POWER LED y lights up now.

5. When the TO AMP LED r is lit, the device is not active and the input signal is sent to the connected amplifier via the ‘True Bypass’ circuit.

6. To activate the device, press the foot switch t . The TO AMP LED r turns off. Play the instrument. The effect is generated by the built-in membrane in the device, whose sound waves are passed through the hose. Put the end of the tube into your mouth in front of the microphone. Through various mouth movements, you can model the sound of your playing. The resulting sound is then picked up by the microphone.

Technical specifications

Maximum input level:

Input impedance:

Operating voltage:

+9.5 dBu

1 MΩ

12 V, 2 A

Output power:

Dimensions (W × H × D):

Weight:

8 W

136 mm × 62 mm × 191 mm

1.7 kg

For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.

This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose of your old device with your normal household waste. Dispose of this product through an approved waste disposal firm or through your local waste facility. Comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • [email protected]

DocID: 430864_24.11.2020

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Built-in membrane for creating vocal-like effects
  • Adjustable tone and drive controls for customizing the sound
  • True Bypass for unaffected signal when the effect is turned off
  • To Amp connectivity for direct connection to an amplifier
  • 1/4" input and output jacks for easy integration
  • 12 V power supply for reliable operation

Related manuals

Frequently Answers and Questions

How do I connect the Talk Box to my amplifier?
Use a jack cable to connect the To Amp output on the Talk Box to the input of your amplifier.
Can I use the Talk Box with other instruments besides guitar and keyboard?
While the Talk Box is primarily designed for electric guitar and keyboard, it can potentially be used with other instruments that produce an electrical signal.
How do I power the Talk Box?
The Talk Box requires a 12 V, 2 A power supply. Use the supplied AC adapter to connect the Talk Box to a mains socket.
What is the purpose of the Drive control?
The Drive control adjusts the input gain, allowing you to increase the intensity of the effect.
Can I use the Talk Box without a microphone?
No, the Talk Box requires a microphone to capture the sound produced by the built-in membrane.
Download PDF

advertisement