BS-2010
speaker stand user manual
Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
E-mail: [email protected]
Internet: www.thomann.de
27.07.2015, ID: 320824
Table of contents
Table of contents
1 General information................................................................................................................................. 4
1.1 Further information........................................................................................................................... 5
1.2 Notational conventions.................................................................................................................... 6
1.3 Symbols and signal words............................................................................................................... 6
2 Safety notes.................................................................................................................................................. 8
3 Features....................................................................................................................................................... 11
4 Operating.................................................................................................................................................... 12
5 Technical specifications....................................................................................................................... 17
6 Protecting the environment.............................................................................................................. 18
BS-2010
3
General information
1 General information
This manual contains important instructions for the safe operation of the product. Read and follow the safety instructions and all other instructions. Keep the manual for future reference.
Make sure that it is available to all those using the product. If you sell the unit, please make sure that the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject to change.
speaker stand
4
General information
1.1 Further information
On our website ( www.thomann.de) you will find lots of further information and details on the following points:
Download
Keyword search
Service
This manual is also available as PDF file for you to download.
Use the search function in the electronic version to find the topics of interest for you quickly.
Online guides
Our online guides provide detailed information on technical basics and terms.
Personal consultation For personal consultation please contact our technical hotline.
If you have any problems with the device the customer service will gladly assist you.
BS-2010
5
General information
1.2 Notational conventions
This manual uses the following notational conventions:
Instructions The individual steps of an instruction are numbered consecutively. The result of a step is indented and highlighted by an arrow.
Example:
1.
Switch on the device.
2.
Press [Auto] .
ð Automatic operation is started.
3.
Switch off the device.
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
speaker stand
6
Signal word
DANGER!
CAUTION!
NOTICE!
Warning signs
General information
Meaning
This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided.
This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in minor injury if it is not avoided.
This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in material and environmental damage if it is not avoided.
Type of danger
Warning – danger zone.
BS-2010
7
Safety notes
2 Safety notes
Intended use This speaker stand is used for stable fixing and height-adjustable installation of loudspeaker cabinets. Use the product only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
This product may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this product only if they are supervised or instructed by a person who is responsible for their safety.
speaker stand
8
Safety
Safety notes
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from the product. They could swallow the pieces and choke!
Never let children play unattended with the product.
CAUTION!
Danger of tipping when transported under load
If the stand is moved without having removed the installed device, the stand may tip over and cause injuries and property damage.
Remove the installed device before transporting the stand.
BS-2010
9
Safety notes
CAUTION!
Danger of tipping on unsuitable surfaces
When the speaker stand is installed on soft or uneven ground, the stand may tip over and cause injuries and property damage.
Install the stand only on even and solid surfaces.
CAUTION!
Danger of tipping due to overload
In case of overload, the stand may tip over and cause injuries and property damage.
Never exceed the maximum load capacity specified for the stand.
speaker stand
10
3 Features
Special characteristics: n Steel speaker stand n Extendible up to a height of about 2 m n Centric load capacity up to 30 kg n 25 mm pipe diameter at the pole mount n Including adapter from 25 mm diameter to M6 thread (12 mm long) n Foot diameter 1000 mm n Transport length when folded: 1.19 m
Features
BS-2010
11
Operating
4 Operating
Unpack and check carefully there is no transportation damage before using the product. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
CAUTION!
Danger of tipping due to overload
In case of overload, the stand may tip over and cause injuries and property damage.
Never exceed the maximum load capacity specified for the stand.
speaker stand
12
Operating
CAUTION!
Danger of tipping on unsuitable surfaces
When the speaker stand is installed on soft or uneven ground, the stand may tip over and cause injuries and property damage.
Install the stand only on even and solid surfaces.
CAUTION!
Danger of tipping when transported under load
If the stand is moved without having removed the installed device, the stand may tip over and cause injuries and property damage.
Remove the installed device before transporting the stand.
BS-2010
13
Operating
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react with the coating of your parquet, linoleum, laminate or PVC floor and after some time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the floor, but use felt-pad floor protectors or a carpet.
speaker stand
14
Setting up
Operating
Follow the steps described below:
1.
Unfold the feet of the tripod until the cross braces are in a horizontal position.
2.
Fix this position with the safety screw on the slider to which the three feet are attached.
3.
Pull out the safety cotter and loosen the locking screw on the extension tube.
4.
Pull out the extension tube to the desired height and slide the safety cotter through the corresponding grid hole.
5.
Fix the position of the extension tube with the safety bolt on the extension tube.
6.
Flange the speaker box on top of the extension tube. For this purpose, use the adapter supplied with the tripod, if necessary. The weight of the speaker box to be set up must not exceed the maximum centric load of 30 kg.
BS-2010
15
Operating
Dismounting 1.
Remove the speaker box.
2.
Pull out the safety cotter and hold the extension tube while you loosen the locking screw on the extension tube.
3.
Slide the extension tube all the way down and slide the safety cotter through the corre‐ sponding grid hole.
4.
Fix the position of the extension tube with the safety bolt on the extension tube.
5.
Loosen the safety screw on the slider to which the three feet are attached.
6.
Fold up the feet of the tripod.
speaker stand
16
5 Technical specifications
Permitted centric loadability
Minimum support height
Maximum support height
Tripod flange
Weight
Transport length when folded
Colour
30 kg
119 cm
200 cm
25 mm diameter
2.6 kg
119 cm
Black
BS-2010
Technical specifications
17
Protecting the environment
6 Protecting the environment
Disposal of the packaging mate‐ rial
For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
speaker stand
18
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
