Pioneer XDJ-700 DJ Player Owner's Manual
Pioneer XDJ-700 is a professional-grade digital DJ controller that allows DJs to play and mix music from various sources, including USB drives, SD cards, and computers. With its intuitive interface, built-in effects, and support for various software, the XDJ-700 offers a wide range of creative possibilities for both beginner and experienced DJs.
Advertisement
Advertisement
MULTI PLAYER
XDJ-700
http://pioneerdj.com/support/
The Pioneer DJ support site shown above offers FAQs, information on software and various other types of information and services to allow you to use your product in greater comfort.
http://rekordbox.com/
For various types of information and services regarding rekordbox™, see the Pioneer DJ website above.
Operating Instructions (Quick Start Guide)
Thank you for buying this Pioneer DJ product. Please read through these operating instructions so you will know how to operate your model properly.
After you have finished reading the instructions, put them away in a safe place for future reference.
In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings.
However the method of connecting and operating the unit is the same.
IMPORTANT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
D3-4-2-1-1b_A1_En
NOTE
THE NO USER-SERVICEABLE PARTS COMPARTMENT WARNING IS LOCATED ON THE APPLIANCE BOTTOM.
D3-7-13-68_A1_En
IMPORTANT
Ce symbole de l’éclair, placé dans un triangle équilatéral, a pour but d’attirer l’attention de l’utilisateur sur la présence, à l’intérieur du coffret de l’appareil, de
“tensions dangereuses” non isolées d’une grandeur suffisante pour représenter un risque d’électrocution pour les êtres humains.
ATTENTION
DANGER D´ELECTROCUTION
NE PAS OUVRIR
ATTENTION :
POUR ÉVITER TOUT RISQUE
D’ÉLECTROCUTION, NE PAS ENLEVER LE
COUVERCLE (NI LE PANNEAU ARRIÈRE).
AUCUNE PIÈCE RÉPARABLE PAR
L’UTILISATEUR NE SE TROUVE À
L’INTÉRIEUR. CONFIER TOUT ENTRETIEN À
UN PERSONNEL QUALIFIÉ UNIQUEMENT.
Ce point d’exclamation, placé dans un triangle équilatéral, a pour but d’attirer l’attention de l’utilisateur sur la présence, dans les documents qui accompagnent l’appareil, d’explications importantes du point de vue de l’exploitation ou de l’entretien.
D3-4-2-1-1b_A1_Fr
REMARQUE
L’AVERTISSEMENT DE PIÈCES NON RÉPARABLES PAR L’UTILISATEUR SE TROUVE SUR LE DESSOUS DE L’APPAREIL.
D3-7-13-68_A1_ Fr
2
En
1)
2)
3) Heed all warnings.
4)
6)
7)
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
8) accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized
9) or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10)
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11)
12)
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13)
14)
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
D3-7-13-69_En
WARNING
This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture.
D3-4-2-1-3_A1_En
WARNING
To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the equipment.
D3-4-2-1-7a_A1_En
VENTILATION CAUTION
When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation
(at least 5 cm at rear, and 5 cm at each side).
D3-4-2-1-7d*_A1_En
CAUTION
The switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from the AC outlet in case of an accident.
To avoid fire hazard, the power cord should also be unplugged from the AC outlet when left unused for a long period of time (for example, when on vacation).
D3-4-2-2-2a*_A1_En
Operating Environment
Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light).
D3-4-2-1-7c*_A2_En
When using this product, confirm the safety information shown on the bottom of the unit.
D3-4-2-2-4_B1_En
CAUTION
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.
D8-10-3a_A1_En
AVERTISSEMENT
Cet appareil n’est pas étanche. Pour éviter les risques d’incendie et de décharge électrique, ne placez près de lui un récipient rempli d’eau, tel qu’un vase ou un pot de fleurs, et ne l’exposez pas à des gouttes d’eau, des
éclaboussures, de la pluie ou de l’humidité.
D3-4-2-1-3_A1_Fr
AVERTISSEMENT
Pour éviter les risques d’incendie, ne placez aucune flamme nue (telle qu’une bougie allumée) sur l’appareil.
D3-4-2-1-7a_A1_Fr
PRÉCAUTION DE VENTILATION
Lors de l’installation de l’appareil, veillez à laisser un espace suffisant autour de ses parois de manière à améliorer la dissipation de chaleur (au moins 5 cm à l’arrière et 5 cm de chaque côté).
D3-4-2-1-7d*_A1_Fr
ATTENTION
L’interrupteur de cet appareil ne coupe pas complètement celui-ci de sa prise secteur. Comme le cordon d’alimentation fait office de dispositif de déconnexion du secteur, il devra être débranché au niveau de la prise secteur pour que l’appareil soit complètement hors tension. Par conséquent, veillez à installer l’appareil de telle manière que son cordon d’alimentation puisse être facilement débranché de la prise secteur en cas d’accident. Pour éviter tout risque d’incendie, le cordon d’alimentation sera débranché au niveau de la prise secteur si vous prévoyez une période prolongée de non utilisation
(par exemple avant un départ en vacances).
D3-4-2-2-2a*_A1_Fr
Milieu de fonctionnement
Température et humidité du milieu de fonctionnement :
De +5 °C à +35 °C (de +41 °F à +95 °F) ; Humidité relative inférieure à 85 % (orifices de ventilation non obstrués)
N’installez pas l’appareil dans un endroit mal ventilé ou un lieu soumis à une forte humidité ou en plein soleil
(ou à une forte lumière artificielle).
D3-4-2-1-7c*_A1_Fr
Lorsque vous utilisez ce produit, vérifiez les informations concernant la sécurité sous l’appareil.
D3-4-2-2-4_B1_Fr
En
3
The Safety of Your Ears is in Your Hands
Get the most out of your equipment by playing it at a safe level – a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time, your hearing
“comfort level” adapts to higher volumes of sound, so what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
ESTABLISH A SAFE LEVEL:
• Set your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, without distortion.
• Once you have established a comfortable sound level, set the dial and leave it there.
BE SURE TO OBSERVE THE FOLLOWING
GUIDELINES:
• Do not turn up the volume so high that you can’t hear what’s around you.
• Use caution or temporarily discontinue use in potentially hazardous situations.
• Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas.
S001a_A1_En
IMPORTANT NOTICE
THE MODEL NUMBER AND SERIAL NUMBER OF
THIS EQUIPMENT ARE ON THE REAR OR BOTTOM.
RECORD THESE NUMBERS ON PAGE 11 FOR
D36-AP9-3*_A1_En
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest service center or your dealer for a replacement.
S002*_A1_En
This product is for general household purposes. Any failure due to use for other than household purposes
(such as long-term use for business purposes in a restaurant or use in a car or ship) and which requires repair will be charged for even during the warranty period.
K041_A1_En
Information to User
Alterations or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.
D8-10-2_A1_En
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
D8-10-1-2_A1_En
FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Product Name: MULTI PLAYER
Model Number: XDJ-700
Responsible Party Name: AlphaTheta Music Americas, Inc. OPERATIONS DIVISION
Address: 2050 W. 190th Street, Suite 109, Torrance, CA 90504, U.S.A.
Phone: 1-424-488-0480
URL: pioneerdj.com
D8-10-4*_C1_En
4
En
Before you start
How to read this manual
Thank you for buying this Pioneer DJ product.
Be sure to read both this leaflet and the operating instructions! Both documents include important information that you must understand before using this product.
After you have finished reading the instructions, put them away in a safe place for future reference.
!
For instructions on acquiring the operating instructions, see
Acquiring this unit’s Operating Instructions (p. 5 ).
Features
This unit is a DJ player equipped with the technology of the Pioneer
DJ’s CDJ series, the world standard for club players. Full-fledged DJ performances can be made using tracks not only on USB devices and computers but also on mobile devices (smartphones, etc.). It is not only equipped with a wide range of features for DJ performances, including the PRO DJ LINK, quantize and beat sync functions, it also has a high reliability design and a panel layout providing high operability, thereby offering strong support for all types of DJ performances.
Acquiring this unit’s Operating
Instructions
Various instructions are sometimes provided as files in PDF format.
Adobe ® Reader ® must be installed in order to view PDF format files.
1 Launch a web browser on the computer and access the Pioneer DJ support site below.
http://pioneerdj.com/support/
2 On the Pioneer DJ support site, click [Manuals] under
[XDJ-700].
3 Click on the required language on the download page.
Downloading of the operating instructions begins.
What’s in the box
!
Power cord
!
Audio cable × 1
!
LAN cable × 1
!
AC adapter × 1
!
Operating Instructions (Quick Start Guide) (This document) × 1
Preparing the software
Music management software rekordbox and driver software are not included.
To use rekordbox and the driver software, access the rekordbox site and
Pioneer DJ Support site, and download the software.
!
The user is responsible for preparing the computer, network devices and other elements of the Internet usage environment required for a connection to the Internet.
About rekordbox
rekordbox is a composite software that enables track management and
DJ performances.
An excellent DJ performance can be achieved by using the music files managed by rekordbox together with this unit.
Acquiring rekordbox (Mac/Windows)
1 Open your web browser on your computer, and access the rekordbox site.
http://rekordbox.com/
2 Click [Download] in the rekordbox site and download rekordbox from the download page.
!
For inquiries on rekordbox (Mac/Windows), please see the support site indicated above.
About rekordbox (iOS/Android)
Tracks managed by rekordbox (iOS/Android) can be played by connecting the mobile device on which rekordbox (iOS/Android) is installed via USB. For supported devices, see the Pioneer DJ website (http://pioneerdj.com/support/). For instructions on rekordbox (iOS/Android), see the rekordbox (iOS/Android) user’s manual.
!
For details on installing rekordbox (iOS/Android), see the Pioneer DJ website (http://rekordbox.com/).
About the driver software (Windows)
This driver software is an exclusive ASIO driver for outputting audio signals from the computer.
!
There is no need to install the driver software when using Mac OS X.
Obtaining the driver software
1 Launch a web browser on the computer and access the Pioneer DJ support site below.
http://pioneerdj.com/support/
2 Click [Software Download] under [XDJ-700] on the
Pioneer DJ support site.
3 Click the icon of the driver software to download the driver software from the download page.
!
For information on installing the driver software, see the Pioneer
DJ support site.
Usable media
This unit is compatible with USB mass storage class USB devices such as mobile flash memory and digital audio player.
Supported file systems
FAT16, FAT32 and HFS+ (NTFS is not supported.)
!
Information such as cue points, loops points and hot cues can be stored via USB.
!
Depending on the USB device you are using, you may not achieve the expected performance.
!
There is no guarantee that all USB devices will operate on this unit.
For more information, please refer to the operational instruction of this product published on the Pioneer DJ support site.
En
5
Attaching the stand
You can easily attach and remove the stand to/from this product. If using this unit placed side by side with previous DJ players or DJ mixers, you can align the operation panels at the same level by attaching the stand to this unit.
How to attach
1 Insert the protrusions on the stand into the guide holes on the bottom of this unit.
2 Push the stand until it clicks into place.
3 Check that the two release levers are firmly hooked on this unit and are not released.
How to remove
1 Move the two release levers on the bottom of the stand inward to release the lock.
2 Remove the stand.
Release lever
CAUTION
You may drop the product if you release the lock of the release lever while the product is lifted.Hold the product tightly and remove the stand from it.
6
En
Connections
!
Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.
!
Refer to the operating instructions for the component to be connected.
!
Connect the power cord after all the connections between devices have been completed.
!
When using a LAN cable for connection, be sure to use either the LAN cable included with this product or an STP (shielded twisted pair) cable.
!
Do not disconnect the LAN cable when music files and/or information are being shared using PRO DJ LINK.
Basic style
Playback on this unit is performed mainly using tracks prepared with rekordbox installed on a computer.
!
For instructions on operating rekordbox, see rekordbox (Mac/Windows)’s operating instructions. The rekordbox (Mac/Windows) operating instructions can be viewed from the rekordbox (Mac/Windows) [Help] menu.
!
Also, for DJ players and DJ mixers, up to four PRO DJ LINK-compatible players can be connected with LAN cables (CAT5e) using PRO DJ LINK connections.
!
A switching hub (commercially available) may be necessary, depending on the combination of models used. Use a switching hub of 100 Mbps or greater. Some switching hubs may not operate properly.
A switching hub (commercially available) is necessary to connect to a mixer equipped with only one LAN port. For mixers with enough LAN ports for all the DJ players and computers in the system, connect directly to the LAN ports on the mixer’s rear panel, without using a hub.
PRO DJ LINK (USB Export)
!
rekordbox music files and data can be exchanged with this unit using a memory device (flash memory, hard disk, etc.), eliminating the need to take a computer into the DJ booth. Such information as playlists, cues, loops and hot cues set in advance with rekordbox can be used for playback.
rekordbox
Computer Mobile device on which rekordbox is installed
LAN cable
Switching hub
Audio cable
LAN cable
LAN cable
Audio cable
R L
USB device on which rekordbox data is recorded
DJ player DJ mixer
AC adapter
Rear panel
To power outlet
Cautions
In order to maximize the use of music file management functions of rekordbox, please match the player number with the channel of audio cable entered in the mixer.
If the player number is different, change the [ PLAYER No.
] setting on the [ UTILITY ] screen.
= For information on changing the settings of [ UTILITY ] screen, please refer to the operating instructions for this product published on the Pioneer
DJ support site.
!
When a storage device is connected to this unit, [ PLAYER No.
] is displayed in gray and cannot be changed. Disconnect the storage device or LAN cable to turn the link off, then change the setting.
En
7
Operation
Turning the power on
1 Make all the connections, then plug the power cord into a power outlet.
= Connections (p. 7 )
2 Press the [ u ] switch.
This unit’s indicators light and the power turns on.
Playing media connected to or inserted in this unit
1 Load the medium in this unit.
2 Touch [USB].
The tracks or folders are displayed on a list.
Connecting USB devices
1 Press the [ u ] switch to turn this unit’s power on.
2 Connect the USB device to the USB device insertion slot.
The contents of the media to be displayed on the main unit display can be switched.
!
[ USB ]: Displays the contents of the connected USB device and mobile devices.
!
When you touch [ LINK ], other music files in the DJ player will be displayed.
!
When you touch [ rekordbox ], music files in rekordbox will be displayed.
!
If the rekordbox library information was written on the USB device, the rekordbox library is displayed.
= For information on library browsing of rekordbox, please refer to the operating instructions for this product published on the
Pioneer DJ support site.
3 Turn the rotary selector.
Move the cursor and select the item.
!
Press the rotary selector to move to a lower level in the folder. Press the [ BACK ] button to return to the level above.
Disconnecting USB devices
1 Press and hold the [USB STOP] button until the USB indicator stops flashing.
Do not remove the USB device or turn Off the power of the unit while the USB indicator is blinking. The management data in the unit may get deleted. Also, the USB device may become unreadable.
USB indicator
USB STOP button
2 Disconnect the USB device.
4 Select the track and press the rotary selector.
When the track is loaded, the screen switches to the normal playback screen.
The medium on which the track is loaded flashes.
= For information on normal playback screen, please refer to the operating instructions for this product published on the Pioneer
DJ support site.
For information on other operations, please refer to the operating instructions for this product published on the Pioneer DJ support site.
8
En
Additional information
Troubleshooting
!
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below and the [ FAQ ] for the [ XDJ-700 ] on the Pioneer DJ support site.
http://pioneerdj.com/support/
Sometimes the problem may lie in another component. Inspect the other components and electrical appliances being used. If the problem cannot be rectified, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
!
This unit may not operate properly due to static electricity or other external influences. In this case, proper operation may be restored by turning the power off, waiting 1 minute, then turning the power back on.
Problem Check Remedy
File cannot be played.
No sound is produced, or sound is distorted or noisy.
Is the file copyright-protected (by DRM)?
Are you operating the connected DJ mixer properly?
Is this unit placed near a TV?
Copyright-protected files cannot be played.
Check the operation of the DJ mixer.
Turn the TV’s power off or install this unit and TV away from each other.
File information is not properly displayed.
Is [ LANGUAGE ] properly set?
Is the information recorded in a language not supported by this unit?
Track search operation takes too long. Is the auto cue function activated?
—
Set [ LANGUAGE ] to the proper language.
When creating files using DJ software, etc., record the information in a language supported by this unit.
Track searching may take some time when there are long silent sections between tracks.
If track searching is not possible within 10 seconds, a cue point is set at the beginning of the track.
Set a cue point.
Set loop points.
After changing settings, wait at least 10 seconds before turning the power off.
[
Back cue function does not work.
Loop play function does not work.
Is a cue point set?
Are loop points set?
Settings are not stored in the memory. Has the power been turned off directly after changing the setting?
USB device is not recognized.
Is the USB device properly connected?
Cue points or loops are not stored on a USB device.
Cue or loop points of tracks recorded on USB devices are not displayed.
Playback does not start immediately after pressing the button to reloop or play in reverse.
The playing address display is not displayed in the remaining time mode.
Time is required to read USB devices
(flash memory drives and hard discs).
Library browsing is not possible.
HISTORY ] is not displayed.
Nothing is displayed.
Is the USB device connected via a USB hub?
Is the USB device supported by this unit?
Is the file format supported by this unit?
Is a USB device loaded?
Is the auto standby function activated?
Connect the device securely (all the way in).
USB hubs cannot be used.
This player only supports USB mass storage class devices.
This player supports portable flash memory and digital audio playback devices.
Check the file format of the connected USB device. For the file formats supported by this unit, see Usable media on page 5 .
—
Is the USB device write-protected?
Turn the power off then back on.
Are you trying to store more points than the limit?
Ten cue points or loop points per track can be stored on a USB device.
If you try to store more points than the limit, [ CUE/LOOPPOINT FULL ] is displayed and the points cannot be stored. In this case, delete some points before storing new ones.
If the USB device is write-protected, [ cannot be stored. Disable the write-protection then store the cue or loop points again.
USB FULL ] is displayed and the points
Is there sufficient free space on the USB device?
If there is not enough free space on the USB device, [ USB FULL ] is displayed and the points cannot be stored. Free up some space then store the cue or loop points again.
Was the USB device properly stopped before it was disconnected the last time?
Is the quantize function on?
—
Points may not be displayed if the SD memory card/USB device is removed without performing the proper stopping procedure or if this unit’s power is turned off.
Make sure the USB indicator has stopped blinking before removing the USB device or turning off the power of the unit.
When the quantize function is on, playback starts from the nearest beat position at the time the button is pressed. If you want the operation to be performed the instant the button is pressed, turn the quantize function off.
When playing files recorded in VBR, it may happen that the set cannot detect the length of the track immediately and that some time is required for the playing address display to appear.
When there are many folders or files, some time may be required for loading.
Is there a large number of folders or files recorded on the USB device?
Are files other than music files stored on the USB device?
When files other than music files are stored in folders, time is required to read them as well. Do not store files or folders other than music files on the USB device.
Is a medium on which library information is recorded loaded?
The library browse mode is only set when media on which library information is recorded are loaded. When a medium on which no library information is recorded is loaded, the folder browse mode is set.
The [ HISTORY ] function can only be used for DJ players on which a USB device is loaded.
This unit is shipped with the auto standby function set to on. If you do not want to use the auto standby function, set [ AUTO STANDBY ] on the [ UTILITY ] menu to [ OFF ].
En
9
Problem
The scale is not displayed.
PRO DJ LINK does not work well.
There is no response when you touch the screen, or the response is bad. A position different from the actually touched location responds.
Check
Is the track over 15 minutes long?
Are the player numbers properly set?
Is the LAN cable properly connected?
Is the switching hub’s power turned on?
Is an unnecessary device connected to the switching hub?
Calibration adjustment of touch display is deviating.
Remedy
The scale is not displayed for tracks whose playing time is over 15 minutes.
Set [ PLAYER No.
] to [ AUTO ] or to a number different from the number currently set.
Connect the LAN cable properly to the [ LINK ] terminal.
Turn the switching hub’s power on.
Disconnect the unnecessary device from the switching hub.
Adjust the touch display by using the [ TOUCH DISPLAY CALIBRATION ] settings in the [ UTILITY ] screen.
Error messages
When this unit cannot operate normally, an error code appears on the display. Check the table below and take the measures indicated. If an error code not shown on the table below is displayed, or if the same error code is displayed again after taking the indicated action, contact your store of purchase.
Error code Error type Description of error Cause and action
E-8302 CANNOT PLAY TRACK(****)
Track data (files) in the USB cannot be read correctly.
The track data (file) may be corrupt. d Check whether the track (file) can be played on another player, etc., capable of playing the same formats as this unit.
E-8304
E-8305
UNSUPPORTED FILE FORMAT
Music files that cannot be played normally are loaded.
Format is wrong.
d Replace with music files in the proper format.
Cleaning the touch display
Do not use organic solvents, acids or alkalis for cleaning the surface of the touch display. Wipe with a dry soft cloth or a cloth immersed in neutral detergent and squeezed properly.
About trademarks and registered trademarks
!
Pioneer DJ is a trademark of PIONEER CORPORATION and is used under license.
!
rekordbox™ is a trademark or registered trademark of AlphaTheta
Corporation.
!
Windows is a registered trademark of Microsoft Corporation in the
United States and other countries.
!
Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
!
ASIO is a trademark of Steinberg Media Technologies GmbH.
!
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.
About using MP3 files
This product has been licensed for nonprofit use. This product has not been licensed for commercial purposes (for profit-making use), such as broadcasting (terrestrial, satellite, cable or other types of broadcasting), streaming on the Internet, Intranet (a corporate network) or other types of networks or distributing of electronic information (online digital music distribution service). You need to acquire the corresponding licenses for such uses. For details, see http://www.mp3licensing.com.
!
The names of companies and products mentioned herein are the trademarks of their respective owners.
Cautions on copyrights
rekordbox restricts playback and duplication of copyright-protected music contents.
!
When coded data, etc., for protecting the copyright is embedded in the music contents, it may not be possible to operate the program normally.
!
When rekordbox detects that coded data, etc., for protecting the copyright is embedded in the music contents, processing (playback, reading, etc.) may stop.
Recordings you have made are for your personal enjoyment and according to copyright laws may not be used without the consent of the copyright holder.
!
Music recorded from CDs, etc., is protected by the copyright laws of individual countries and by international treaties. It is the full responsibility of the person who has recorded the music to ensure that it is used legally.
!
When handling music downloaded from the Internet, etc., it is the full responsibility of the person who has downloaded the music to ensure that it is used in accordance with the contract concluded with the download site.
!
iPod, iPhone, Mac, Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
!
Android ™ is a trademark of Google Inc.
!
iOS is a trademark on which Cisco holds the trademark right in the
US and certain other countries.
!
This software is based in part on the work of the Independent JPEG
Group.
10
En
Specifications
AC adapter
Power ............................................................ AC 100 V to 240 V, 50 Hz/60 Hz
Rated current ......................................................................................... 0.6 A
Rated output ............................................................................... DC 12 V, 2 A
Power consumption (standby) ............................................................. 0.5 W
General – Main Unit
Power consumption .......................................................... DC 12 V, 1200 mA
Main unit weight .......................................................................2.0 kg (4.4 lb)
(When not attached with the stand) .......................................1.7 kg (3.7 lb)
External dimensions .......................................238 mm (W) × 106.3 mm (H)
× 307.8 mm (D) (9.3 in. (W) × 4.1 in. (H) × 12.1 in. (D))
(When not attached with the stand) .......... 238 mm (W) × 78.8 mm (H) ×
307.8 mm (D) (9.3 in. (W) ×3.1 in. (H) ×12.1 in. (D) )
Tolerable operating temperature ........................................ +5 °C to +35 °C
Tolerable operating humidity ...................... 5 % to 85 % (no condensation)
Analog audio output (AUDIO OUT L/R)
Output terminals ...................................................................... RCA terminal
Output Level .........................................................................2.0 Vrms (1 kHz)
Frequency response................................................................ 4 Hz to 20 kHz
S/N ratio ............................................................................................... 115 dB
Total harmonic distortion ..................................................................0.003 %
USB downstream section (USB)
Port .......................................................................................................Type A
Power supply ........................................................................... 5 V/1 A or less
USB upstream section (USB)
Port .......................................................................................................Type B
LAN (PRO DJ LINK)
Rating .......................................................................................... 100Base-TX
Main display
Display type ...........................Active matrix TFT liquid crystal display (LCD)
Supported languages .............................................................. 18 languages
!
The specifications and design of this product are subject to change without notice.
En
11
AlphaTheta Music Americas, Inc.
LIMITED WARRANTY
WARRANTY VALID ONLY IN THE U.S.A. AND CANADA
ONE YEAR LIMITED WARRANTY
AlphaTheta Music Americas, Inc. (COMPANY) warrants that Pioneer DJ branded products distributed by COMPANY in the U.S.A. and Canada that fail to function properly under normal use and conditions due to a manufacturing defect when installed and operated according to the owner’s manual enclosed with the unit, and any officially published guidelines such as technical specifications or service communications, will be repaired or replaced with a unit of comparable value, at the option of COMPANY, without charge to you for parts or actual repair work. Parts supplied under this warranty may be new or rebuilt at the option of COMPANY.
This warranty is valid only in the country of purchase. This limited warranty applies to the original or any subsequent owner of this product during the warranty period provided the product was purchased from an authorized company distributor/dealer in the U.S.A. or Canada. You will be required to provide a sales receipt or other valid proof of purchase showing the date of original purchase or, if rented, your rental contract showing the place and date of first rental. In the event Service is required, the product must be delivered within the warranty period, transportation prepaid, only from within the U.S.A or Canada, as applicable. As explained in this document, you will be responsible for removal and installation of the product. COMPANY will pay to return the repaired or replacement product to you within the
U.S.A or Canada, as applicable.
PRODUCT WARRANTY PERIOD
Parts
Audio and Video .............................................................................................................................................................................................. 1 Year
Labor
1 Year
The warranty period for retail customers who rent the product commences upon the date product is first put into use (a) during the rental period or (b) retail sale, whichever occurs first.
WHAT IS NOT COVERED
IF THIS PRODUCT WAS PURCHASED FROM AN UNAUTHORIZED DISTRIBUTOR, THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED
WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND THIS PRODUCT IS SOLD STRICTLY “AS IS”
AND “WITH ALL FAULTS”.
COMPANY SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL AND/OR INCIDENTAL DAMAGES, INCLUDING WITHOUT LIMITATION LOSS OF USE, LOSS OF
PROFITS OR LOSS OF WAGES, TO THE GREATEST EXTENT ALLOWED BY APPLICABLE LAW. COMPANY’S LIABILITY SHALL UNDER NO CIRCUMSTANCE
EXCEED THE ACTUAL AMOUNT PAID BY YOU FOR THE DEFECTIVE PRODUCT.
This warranty does not apply if the product has been subjected to power in excess of its published power rating.
This warranty does not cover the cabinet or any appearance item, user attached antenna, any damage to records or recording tapes or discs, any damage to the product resulting from alterations, modifications not authorized in writing by COMPANY, accident, misuse or abuse, damage due to lightning or power surges or caused by events beyond COMPANY’s reasonable control, subsequent damage from leaking, damage from inoperative batteries, or the use of batteries not conforming to those specified in the owner’s manual.
This warranty does not cover the cost of parts or labor which would be otherwise provided without charge under this warranty obtained from any source other than a
COMPANY authorized service company or other designated location. This warranty does not cover defects or damage caused by the use of unauthorized parts or labor from improper maintenance.
Altered, defaced, or removed serial numbers void this entire warranty.
This warranty does not cover ordinary wear and tear, damage caused by tampering, abuse, or neglect of the product, or damage caused by parts not provided by company.
COMPANY and its service and repair facilities are not responsible for damage or loss of electronic information or data stored on any returned product.
NO OTHER WARRANTIES
COMPANY LIMITS ITS OBLIGATIONS UNDER ANY IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, TO A PERIOD NOT TO EXCEED THE WARRANTY PERIOD. NO WARRANTIES SHALL APPLY AFTER THE WARRANTY
PERIOD. Some states do not allow limitations on how long an implied warranty lasts and some states do not allow the exclusions or limitations of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may have other rights which may vary from state to state.
No dealer, distributor, or employee of COMPANY is authorized to make any modification, extension, or modification of this warranty.
If any term of this warranty is held to be illegal or unenforceable, the legality or enforceability of the remaining terms shall not be affected or impaired.
TO OBTAIN SERVICE
COMPANY has appointed a number of Authorized Service Companies throughout the U.S.A. and Canada should your product require service. To receive warranty service you need to present your sales receipt or, if rented, your rental contract showing place and date of original owner’s transaction. If shipping the unit, you will need to package it carefully and send it, transportation prepaid by a traceable, insured method, to an Authorized Service Company. Package the product using adequate padding material to prevent damage in transit. The original container is ideal for this purpose. Include your name, address and telephone number where you can be reached during business hours.
On all complaints and concerns in the U.S.A. and Canada call Customer Support at 1-844-784-0000.
For information on hook-up or operation of your unit or to locate an Authorized Service Company, please call or visit:
Website: pioneerdj.com
Phone: 1-844-784-0000
DISPUTE RESOLUTION
Following our response to any initial request to Customer Support, should a dispute arise between you and COMPANY, COMPANY makes available its Complaint Resolution
Program to resolve the dispute. The Complaint Resolution Program is available to you without charge. You are required to use the Complaint Resolution Program before you exercise any rights under, or seek any remedies, created by Title I of the Magnuson-Moss Warranty-Federal Trade Commission Improvement Act, 15 U.S.C. 2301
et seq.
To use the Complaint Resolution Program call 1-844-784-0000 and explain to the customer service representative the problem you are experiencing, steps you have taken to have the product repaired during the warranty period and the name of the authorized Distributor/Dealer from whom the Pioneer DJ branded product was purchased. After the complaint has been explained to the representative, a resolution number will be issued. Within 40 days of receiving your complaint, COMPANY will investigate the dispute and will either: (1) respond to your complaint in writing informing you what action COMPANY will take, and in what time period, to resolve the dispute; or (2) respond to your complaint in writing informing you why it will not take any action.
RECORD THE PLACE AND DATE OF PURCHASE FOR FUTURE REFERENCE
Model No. ____________________________________________ Serial No. _________________________________________ Purchase Date ______________________
Purchased From _____________________________________________________________________________________________________________________________
KEEP THIS INFORMATION AND YOUR SALES RECEIPT IN A SAFE PLACE
UCP0620-A1
12
En
© 2015 AlphaTheta Corporation. All rights reserved.
6F, Yokohama i-Mark Place, 4-4-5 Minatomirai, Nishi-ku, Yokohama, Kanagawa 220-0012 JAPAN
〒220-0012 神奈川県横浜市西区みなとみらい4丁目4番5号 横浜アイマークプレイス6階
6F, Йокогама i-Mark Place, 4-4-5 Минатомирай, Ниси-ку, Йокогама, Канагава 220-0012 ЯПОНИЯ
Artemis Building, Odyssey Business Park, West End Road, South Ruislip, Middlesex, HA4 6QE, U.K. TEL: +44-203-7617-220
2050 W. 190th Street, Suite 109, Torrance, CA 90504, U.S.A. TEL: +1 (424) 488-0480
Printed in Malaysia
AT_001_all_01
<DRH1384-C>
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement