Digital Watchdog DWC-D3263TIR Star-Light™ UHDoC® 2.1MP/1080p indoor dome camera Quick Start Guide

Quick Start Guide

DW® Universal HD over Coax® indoor dome cameras

DWC-D3263TIR

STEP 1 – PREPARING TO MOUNT THE CAMERA

1. The mounting surface must withstand five times the weight of your camera.

2. Pay attention to the cables. The can easily become caught and damaged. Any damage may cause a short or fire.

3. Detach the camera’s dome cover by pressing on both sides of the dome cover.

4. This product is intended to be supplied by a UL Listed Power Supply

Unit marked “Class 2” or “LPS” or “PS2” and rated 12 Vdc, 0.30A min.

Protective sheet

Quick Start Guide

STEP 2 – CABLING THE CAMERA TO

EXTERNAL DEVICES

Pass the wires through the mount bracket and make all necessary connections. Connect the BNC cable and power cables to the camera.

Power Requirements

12VDC ONLY!

CAUTION! The camera supports

DC power supply only

Power Consumption

DC12V (LED off): 1.86W

DC12V (LED on): 3.6W

WHAT’S IN THE BOX

Mount Bolt & Nut Torx Wrench

Screw &

Plastic Anchor-2pcs

Mount Bolt & Nut

Mount Bolt & Nut

Screws and plastic

Torx Wrench

2pcs

Torx Wrench

Test video cable

Screw &

Plastic Anchor-2pcs

Screw &

Plastic Anchor-2pcs

1 Set

Mounting

Mount Bolt & Nut

1

Quick set up guide

Torx Wrench

1 Screw &

Plastic Anchor-2pcs

Template Sheet for installing by Bolt & Nut

1

Manual Test Video Cable

Template Sheet for installing by Bolt & Nut

Template Sheet for installing by Bolt & Nut

Manual

DC plug cable

Manual

Test Video Cable

Test Video Cable

Template Sheet

1 for installing by Bolt & Nut

Manual Test Video Cable

Protective film

NOTE: Download all your support materials and tools in one place.

1. Go to: http://www.digital-watchdog.com/resources

2. Search your product by entering the part number in

the ‘Search by Product’ search bar. Results for

applicable part numbers will populate automatically

based on the part number you enter.

3. Click . All supported materials, including manuals

and quick set up guide (QSGs) will appear in the results.

Attention: This document is intended to serve as a quick reference for initial set up. It is recommended that the user read the entire instruction manual for complete and proper installation and usage.

Tel: +1 (866) 446-3595 / (813) 888-9555

Technical Support Hours:

9:00AM – 8:00PM EST, Monday thru Friday digital-watchdog.com

STEP 3 – CHANGING THE SIGNAL IN

THE CAMERA

1. The camera supports HD-Analog, HD-CVI and HD-TVI signals. To switch between the signals: a. Remove the camera’s dome to access the joystick and OSD

control on the base of the camera. b. Use the OSD Switch to switch the camera’s signal.

- To switch the camera to

HD-TVI mode, press OSD

joystick to the left

for 5 seconds.

- To switch the camera to

HD-Analog mode, press OSD

joystick to the right

for 5 seconds.

- To switch the camera to CVBS

mode, press OSD joystick up

for 5 seconds.

- To switch the camera to

HD- CVI mode, press OSD

joystick down for 5 seconds.

STEP 4 – INSTALLING THE CAMERA

1. Once all cables have been connected, use the screws included with the camera to properly mount and secure the camera to the mounting surface.

2. Adjust the camera’s pan, tilt and position to achieve the desired view.

The cameras’ max angles are:

Pan: 0° ~ 360°

Tilt: 0° ~ 70°

Rotation: 0° ~ 360°

Panning 360°

Quick Start Guide

3. To adjust the camera’s focus and zoom:

a. Unlock the zoom or focus screws by rotating them

counter-clockwise.

b. Adjust the zoom and focus screws at the base of the camera

module to achieve a clear image.

c. Tighten the screws and close the front case by rotating it

clock-wise.

FOCUS

ZOOM

Test video output and

OSD joystick controller

Rotation 360°

Titling 70°

4. Once the installation is complete, remove the protective film from the camera’s dome cover.

5. Once the installation is complete, remove the protective film from the camera’s dome cover.

Rev Date: 06/21

Copyright © Digital Watchdog. All rights reserved.

Specifications and pricing are subject to change without notice.