Jabra

Talk 25 SE

User manual

1. WELCOME ......................................3

2. HEADSET OVERVIEW .................4

3. HOW TO WEAR ............................5

3.1 CHANGE EARGELS

3.2 ATTACHING THE EARHOOK

4. HOW TO CHARGE

THE BATTERY ...............................7

5. HOW TO CONNECT ....................8

6. HOW TO USE ...............................9

6.1 MULTIPLE CALL HANDLING

7. SUPPORT .................................... 12

7.1 HOW TO CARE FOR YOUR HEADSET

2

1. WELCOME

Thank you for using the Jabra Talk 25 SE. We hope you will enjoy it!

JABRA TALK 25 SE FEATURES

• Clear HD calls (phone dependent) - omnidirectional microphone and a dynamic speaker

• Stream from your phone - music, podcasts and GPS directions

• Long lasting - up to 9 hours of calls, and up to

10 days of standby time

3

2. HEADSET OVERVIEW

Micro-USB Port jabra

Answer/End button

On/Off switch

Earhook

Volume up/ down buttons

USB cable Small earhook

Eargel Looped Eargels

Large earhook

4

3. HOW TO WEAR

The headset can be worn on the left or right ear.

5

3.1 Change eargels

Choose between 2 ergo-designed eargels for optimal fit and comfort.

3.2 attaching the earhook

The earhook can be attached to the headset for a more secure fit, and can be worn with or without the eargel.

6

4. HOW TO CHARGE

THE BATTERY

Plug the headset into any available USB port on your PC using the supplied USB cable.

NOTE : For safety reasons, it is recommended not to use the headset while it is charging.

It takes approx. 2 hours to fully charge the headset.

7

5. HOW TO CONNECT

1. Turn the headset on (set the On/off switch to the On position).

2. Press and hold (3 secs) the Answer/end button until the Bluetooth indicator flashes blue, and pairing mode is announced in the headset.

3. Follow the voice-guided pairing instructions to pair to your Bluetooth device.

8

6. HOW TO USE

Battery indicator

On/off switch

Bluetooth indicator

Answer/end button

Volume down

Volume up

9

FUNCTION

Answer call

ACTION

Tap the Answer/end button

End call

Activate voice dialing

(phone dependent)

Reject call

Redial last number

Adjust speaker volume

Mute/ un-mute microphone

Tap the Answer/end button

Press and hold (2 secs) the

Answer/end on a call

button when not

Double-tap the Answer/end button

Double-tap the Answer/end button when not on a call

Tap the Volume up or

Volume down button

Tap both the Volume up and

Volume down to mute/unmute.

10

6.1 Multiple call handling

The headset can accept and handle multiple calls simultaneously.

FUNCTION

End current call and answer incoming call

Switch between held call and active call

Put current call on hold and answer incoming call

Reject incoming call

ACTION

Tap the Answer/ end button

Press and hold

(2 secs) the

Answer/end button

Press and hold

(2 secs) the

Answer/end button

Double-tap the

Answer/end button

11

7. SUPPORT

7.1 How to care for your headset

• Always store the headset with the power off and safely protected

• Avoid storage at extreme temperatures

(above 45°C/113°F or below -20°C/-4°F). This can shorten battery life and may affect headset operation.

• Do not expose the headset to rain or other liquids

12

© 2021 GN Audio. All rights reserved. Jabra trademark of GN Audio. The Bluetooth ®

® is a registered

word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio is under license.

MADE IN CHINA

MODEL: OTE15a

Declaration of Conformity can be found on www.jabra.com/doc