VWR calibration 2022 Guide
Add to My manuals75 Pages
VWR calibration 2022 is an easy-to-use and accurate calibration device that can be used to calibrate a wide range of instruments. It is ideal for use in a variety of applications, including laboratory, industrial, and field settings. The device features a large, easy-to-read display, a simple user interface, and a variety of calibration modes. It also comes with a NIST-traceable certificate of calibration.
advertisement
VWR
®
for
calibration
01.
TRACEABILITY
02.
ACCURACY
03.
RELIABILITY
VWR
®
for
calibration
Scientific analysis becomes ever more sensitive and the need to ensure that results are verified and traceable gathers pace in all industries.
Avantor's VWR brand offers a selection of products to support you each and every day to help you with continuity and reproducibility of your results and discoveries.
From discovery to delivery, our objective is to be the trusted global partner to customers and suppliers in the life science and advanced technology industries. By providing superior product and service solutions, we accelerate innovation and empower the success of our customers.
We set science in motion to create a better world.
Integrity and quality are, and always will be our highest priority. That means delivering
High Purity Standards and Certified Reference
Materials to the market – supporting you every day.
‒
Calibration optimises the accuracy of measuring devices
‒
Accurate measuring tools improve product quality
‒
Instrument calibration is an essential maintenance step that's required to ensure you get the most out of your equipment investment
2 VWR ® for calibration | vwr.com
Table of contents
Multi-parameters certified reference materials
(MPCRMs) – diesel and lubricants
Polysulphide standards in light mineral oil
Water (Karl Fischer standards)
Gas Chromatography (GC) standards
Hydrocarbon oil index standards
COD (Chemical Oxygen Demand) calibration standards
TOC (Total Organic Carbon) calibration standards
vwr.com | VWR ® for calibration 3
PHYSICAL MEASUREMENT STANDARDS
ASTM COLOUR SOLUTIONS
Ready to use solutions that are prepared gravimetrically on a weight/weight basis.
‒ Use either as calibration and/or quality control standards
‒ Designed specifically for use in ASTM analytical methods and produced in accordance with ASTM D1500, D6045, D1209
‒ Traceable product certified by an independent laboratory
‒ Supplied in high quality, tamper-evident bottles
25
40
50
80
Colour standards, Platinum-Cobalt (Pt-Co)Hazen - plastic bottle
0
10
100
250
500
Colour standards - Gardner - glass bottle
6
8
2
4
10
12
14
16
Cat. No. Pk 1000 ml
84806.290
84807.290
84808.290
84809.290
84810.290
84811.290
84812.290
84813.290
84814.290
Cat. No. Pk 500 ml
84815.260
84816.260
84817.260
84818.260
84819.260
84820.260
84821.260
84822.260
Colour standards - Saybolt - glass bottle Cat. No. Pk 100 ml
-15
0
12
15
19
25
30
84805.180
84804.180
84803.180
84802.180
84801.180
84800.180
84799.180
Colour standards solutions - ASTM - glass bottle
A1
A3
A5
A7
Cat. No. Pk 100 ml
84834.180
84796.180
84797.180
84798.180
Cat. No. Pk 500 ml
84805.260
84804.260
84803.260
84802.260
84801.260
84800.260
84799.260
Cat. No. Pk 500 ml
84834.260
84796.260
84797.260
84798.260
Colour reference solutions
Description
Colour reference solutions B (B1 - B9)
Colour reference solutions BY (BY1 - BY7)
Colour reference solutions Y (Y1-Y7)
Colour reference solutions GY (GY1 - GY7)
Colour reference solutions R (R1 - R7)
Transparent empty glass vials
4 VWR ® for calibration | vwr.com
COLOUR REFERENCE SOLUTIONS ACC. TO PH. EUR., READY TO USE
These solutions are developed and produced according to chapter 2.2.2. Degree of coloration of liquids of the European Pharmacopeia. (brown, brown-yellow, greenyellow, red and yellow). These kits are ready to use, and are dedicated to help you save time and money because preparation of these solutions is very complex.
‒ Easy to use kits
‒ Ready to use solutions
‒ Stable - shelf life of 36 months
‒ Certificate of Analysis provided with the kit
The kits are easy to use: Just add the sample into the empty vial provided with the kit and compare the colour with the reference solution in the rack.
Pk
9 x 2 ml vials + 1 empty sample vial
7 x 2 ml vials + 3 empty sample vials
7 x 2 ml vials + 3 empty sample vials
7 x 2 ml vials + 3 empty sample vials
7 x 2 ml vials + 3 empty sample vials
10 x 2 ml
Cat. No.
85752.001
85753.001
85754.001
85755.001
85756.001
88364.001
PHYSICAL MEASUREMENT STANDARDS
All standards are visible behind.
Click here
OXIDATION/REDOX STANDARDS
Avantor offers a wide range of REDOX (ORP) standards, which are produced from high quality reagents.These reference materials can be used as control standards to check the functionality of both the elextrodes and the measuring instruments. The values are temperature dependent, so it is important to control the environment of the measurement. A table of temperatue and corresponding Redox value is available on both the label and the batch specific certificate.
CERTIFIED HUMIDITY STANDARDS
Although most relative humidity (RH) probes have excellent long-term stability, it is recommended that their calibration be checked regularly.
‒ Traceable to national standard – SCS (Swiss Calibration Service) certificate included
‒ Ampoules contain unsaturated salt solutions (~0,8 ml)
‒ Inexpensive on-site calibration
‒ Simple and safe use
‒ 10 year shelf life
‒ Practical packs of five ampoules of the same humidity value
Each ampoule is labelled with the humidity value and serial number.
Values and accuracy (measurement uncertainty values) below are measured at 23 °C.
Relative humidity (RH%)
0,5%
10%
20%
35%
50%
65%
80%
95%
Accuracy
±0,3% RH
±0,3% RH
±0,3% RH
±0,5% RH
±0,9% RH
±0,9% RH
±1,2% RH
±1,2% RH
Cat. No.
620-2272
620-2223
620-2758
620-2224
620-2225
707-0044
620-2226
707-0045
Density
0,6643
0,7186
0,7807
0,8163
0,8494
0,8642
0,8797
0,6597
0,7145
Reference
Temperature
15 °C
15 °C
15 °C
15 °C
15 °C
15 °C
15 °C
20 °C
20 °C
Test Method
ASTM D1480
ASTM D1480
ASTM D1480
ASTM D1480
ASTM D1480
ASTM D1480
ASTM D1480
ASTM D1480
ASTM D1480
Pack type
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Pk
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
RELATIVE DENSITY STANDARDS WITHIN THE RANGE OF 15 TO 25 °C
This range of relative density standards are certified in accordance with primary level
ASTM D1480 methodology and are dual-certified to ISO 17025 / ISO 17034 under
UKAS accreditation. Relative density standards are designed for the calibration or verification of instruments used to measure density and relative density of materials at the desired test temperature within the range of 15 to 25 °C.
‒ Certified in accordance with primary level ASTM D1480 methodology
‒ Full traceability to national standards
‒ Supplied in tamper-evident packaging with a 2 year shelf life
Relative density is calculated by dividing the density, as obtained from ASTM D1480, by the density of water at the reference temperature.
The density of water was taken from the table «Density of Water» found in ASTM
D1480 and confirms to the International Temperature Scale (ITS 90).
Dual-certified to ISO 17025 / ISO 17034 under UKAS accreditation.
The density given in the ordering table below is the nominal relative density value - actual batch values are given in the certification documents supplied with the product and also on the label.
Cat. No.
99131.260
99132.260
99133.260
99134.260
99135.260
99136.260
99137.260
99138.260
99139.260
Density
0,7769
0,8400
0,8452
0,8723
0,6552
0,7104
0,7730
0,8366
0,8693
Reference
Temperature
20 °C
20 °C
20 °C
20 °C
25 °C
25 °C
25 °C
25 °C
25 °C
Test Method
ASTM D1480
ASTM D1480
ASTM D1480
ASTM D1480
ASTM D1480
ASTM D1480
ASTM D1480
ASTM D1480
ASTM D1480
Pack type
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Pk
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
Cat. No.
99140.260
99141.260
99142.260
99143.260
99144.260
99145.260
99146.260
99147.260
99148.260
vwr.com | VWR ® for calibration 5
PHYSICAL MEASUREMENT STANDARDS
DENSITY STANDARDS
These products can be used as calibration standards for density measurements by pycnometric, vibrational or hydrometer-based techniques.
‒ High accuracy across an extensive density range
‒ No toxic heavy metals used in any formulation
‒ Can be used with any brand or type of density measuring instrument
‒ Supplied in a high quality, tamper proof, amber glass bottle
These standards are prepared gravimetrically (solute and solvent) using OIML traceable weights. The standard’s density are established using fully calibrated reference pycnometers.
In accordance with ASTM D1480-12 for testing of density or relative density.
A Certificate of Calibration is issued in accordance with the requirements of
ISO/IEC 17025.
Conc. at
15 °C (g/ml)
0,6960
0,7073
0,7184
0,7298
0,7411
0,7524
0,7721
0,7933
0,8168
0,8428
0,8715
0,9135
0,9514
1,0040
1,0337
Cat. No.
85140.180
85141.180
85142.180
85143.180
85144.180
85145.180
85146.180
85147.180
85148.180
85149.180
85150.180
85151.180
85152.180
85153.180
85154.180
Conc. at
15 °C (g/ml)
1,0828
1,1661
1,2498
1,3318
1,4152
1,5820
1,7495
1,9171
2,0846
2,2568
2,4261
2,6055
2,7588
2,9418
3,1140
Cat. No.
85155.180
85156.180
85157.180
85158.180
85159.180
85160.180
85161.180
85162.180
85163.180
85164.180
85165.180
85166.180
85167.180
85168.180
85169.180
Conc. at
20 °C (g/ml)
0,6919
0,7033
0,7148
0,7261
0,7374
0,7488
0,7683
0,7893
0,8126
0,8384
0,8668
0,9098
0,9476
1,0005
1,0301
Cat. No.
85170.180
85171.180
85172.180
85173.180
85174.180
85175.180
85176.180
85177.180
85178.180
85179.180
85180.180
85181.180
85182.180
85183.180
85184.180
Conc. at
20 °C (g/ml)
1,0792
1,1651
1,2486
1,3304
1,4136
1,5799
1,7470
1,9141
2,0812
2,2531
2,4219
2,6011
2,7542
2,9370
3,1096
Cat. No.
85185.180
85186.180
85187.180
85188.180
85189.180
85190.180
85191.180
85192.180
85193.180
85194.180
85195.180
85196.180
85197.180
85198.180
85199.180
Conc. at
25 °C (g/ml)
0,6878
0,6993
0,7111
0,7223
0,7337
0,7452
0,7645
0,7853
0,8084
0,8340
0,8622
0,9060
0,9438
0,9969
1,0265
Cat. No.
85200.180
85201.180
85202.180
85203.180
85204.180
85205.180
85206.180
85207.180
85208.180
85209.180
85210.180
85211.180
85212.180
85213.180
85214.180
Conc. at
25 °C (g/ml)
2,0775
2,2490
2,4175
2,5964
2,7493
2,9319
3,1043
1,0755
1,1639
1,2471
1,3287
1,4117
1,5775
1,7441
1,9108
Cat. No.
85215.180
85216.180
85217.180
85218.180
85219.180
85220.180
85221.180
85222.180
85223.180
85224.180
85225.180
85226.180
85227.180
85228.180
85229.180
Conc. at
40 °C (g/ml)
0,6752
0,6872
0,6997
0,7109
0,7226
0,7343
0,7531
0,7733
0,7958
0,8207
0,8482
0,8945
0,9323
0,9857
1,0152
Cat. No.
85230.180
85231.180
85232.180
85233.180
85234.180
85235.180
85236.180
85237.180
85238.180
85239.180
85240.180
85241.180
85242.180
85243.180
85244.180
Conc. at
40 °C (g/ml)
1,0642
1,1581
1,2408
1,3217
1,4039
1,5685
1,7339
1,8994
2,0649
2,2352
2,4028
2,5807
2,7329
2,9132
3,0852
Cat. No.
85245.180
85246.180
85247.180
85248.180
85249.180
85250.180
85251.180
85252.180
85253.180
85254.180
85255.180
85256.180
85257.180
85258.180
85259.180
Conc. at
50 °C (g/ml)
0,6668
0,6791
0,6917
0,7033
0,7151
0,7269
0,7454
0,7653
0,7873
0,8118
0,8387
0,8868
0,9245
0,9777
1,0073
Cat. No.
85260.180
85261.180
85262.180
85263.180
85264.180
85265.180
85266.180
85267.180
85268.180
85269.180
85270.180
85271.180
85272.180
85273.180
85274.180
Conc. at
50 °C (g/ml)
1,0562
1,1512
1,2346
1,3138
1,3973
1,5609
1,7257
1,8904
2,0551
2,2247
2,3916
2,5689
2,7207
2,9005
3,0721
Cat. No.
85275.180
85276.180
85277.180
85278.180
85279.180
85280.180
85281.180
85282.180
85283.180
85284.180
85285.180
85286.180
85287.180
85288.180
85289.180
Conc. at
60 °C (g/ml)
0,6582
0,6708
0,6835
0,6955
0,7076
0,7196
0,7376
0,7572
0,7788
0,8027
0,8292
0,8790
0,9166
0,9695
0,9990
1,0478
Cat. No.
85290.180
85291.180
85292.180
85293.180
85294.180
85295.180
85296.180
85297.180
85298.180
85299.180
85300.180
85301.180
85302.180
85303.180
85304.180
85305.180
Conc. at
80 °C (g/ml)
0,6407
0,6538
0,6661
0,6798
0,6923
0,7047
0,7220
0,7407
0,7614
0,7844
0,8098
0,8629
0,9006
0,9520
0,9815
1,0302
Cat. No.
85306.180
85307.180
85308.180
85309.180
85310.180
85311.180
85312.180
85313.180
85314.180
85315.180
85316.180
85317.180
85318.180
85319.180
85320.180
85321.180
6 VWR ® for calibration | vwr.com
PHYSICAL MEASUREMENT STANDARDS
Description
4-Acetylbenzonitrile
Acetanilide
Anthraquinone
Benzoic acid
Benzophenone
Caffeine
Carbazole m-Toluic acid
Phenacetin
Phenacetin
Phenolphthalein
Saccharin
Salicylic acid
Sulphanilamide
Vanillin
Melting point standard set (benzophenone/benzoic acid/anthraquinone)
Melting point standard set (sulphanilamide/caffeine/vanillin)
Melting point standard set, (vanillin/phenacetin/caffeine)
*1 g of each substance
MELTING POINT STANDARDS
These standards can be used with any melting point apparatus and are prepared using pure raw materials. Melting points are determined using a high accuracy
Differential Scanning Calorimeter (DSC) system that is calibrated to the ITS 90
International Temperature Scale.
‒ Ready to use
‒ Traceable
‒ Uncertainty of measurement up to ±0,3 °C
The melting points of these standards range from benzophenone (+47...+49 °C) to anthraquinone (+283...+286 °C).
Melting pt.
56...59 °C
113...116 °C
283...286 °C
121...123 °C
47...49 °C
235...238 °C
243...247 °C
107...113 °C
133...135 °C
133...135 °C
258...263 °C
226...229 °C
158...160 °C
164 ...166 °C
81...83 °C
47...49 °C/121...123 °C/283...286 °C
164 ...166 °C/235...238 °C/81...83 °C
81...83 °C/134…136 °C/235...237 °C
3*
3*
1
1
3 *
1
1
1
1
1
1
1
0,5
1
1
1
1
1
Pk (g) Cat. No.
88442.001
88445.001
85110.001
85104.001
85101.001
85108.001
85109.001
88444.001
85105.005
85105.001
88446.001
88449.001
85106.001
85107.001
85103.001
85112.003
85111.003
85113.003
REFRACTIVE INDEX STANDARDS
Refractive index of a standard is verified using a calibrated- and temperaturecontrolled refractometer.
‒ Standards are prepared gravimetrically on weight/weight basis
‒ Solute (sucrose) and solvent (water) are weighed on a calibrated balance using
OIML traceable weights
Certificate of Calibration is issued in accordance with the requirements of
ISO/IEC 17025.
Description
Refractive index Pk
Refractive index standard at 20 °C, solvent-based
Refractive index standard at 20 °C, solvent-based
Refractive index standard at 20 °C, solvent-based
Refractive index standard at 20 °C, solvent-based
Refractive index standard at 20 °C, solvent-based
Refractive index standard at 20 °C, solvent-based
Refractive index standard at 20 °C, solvent based
Refractive index standard at 20 °C, solvent-based
Refractive index standard at 20 °C, solvent-based
Refractive index standard at 20 °C, solvent-based
1,38779 nD
1,49672 nD
15 ml
1,40485 nD 15 ml
1,42345 nD 15 ml
1,44468 nD 15 ml
1,46768 nD 15 ml
15 ml
1,50044 nD 15 ml
1,51726 nD 15 ml
1,53660 nD 15 ml
1,65808 nD 15 ml
Refractive index standard at 20 °C, stabilised sucrose 1,34325 nD 15 ml
Refractive index standard at 20 °C, stabilised sucrose 1,34782 nD 15 ml
Refractive index standard at 20 °C, stabilised sucrose 1,34968 nD 15 ml
Cat. No.
85114.015
85115.015
85116.015
85117.015
85118.015
85119.015
85120.015
85121.015
85122.015
85123.015
85124.015
85125.015
85126.015
Description
Refractive index Pk
Refractive index standard at 20 °C, stabilised sucrose 1,35015 nD 15 ml
Refractive index standard at 20 °C, stabilised sucrose 1,35093 nD 15 ml
Refractive index standard at 20 °C, stabilised sucrose 1,35171 nD 15 ml
Refractive index standard at 20 °C, stabilised sucrose 1,35568 nD 15 ml
Refractive index standard at 20 °C, stabilised sucrose 1,37233 nD 15 ml
Refractive index standard at 20 °C, stabilised sucrose 1,38115 nD 15 ml
Refractive index standard at 20 °C, stabilised sucrose 1,39032 nD 15 ml
Refractive index standard at 20 °C, stabilised sucrose 1,39986 nD 15 ml
Refractive index standard at 20 °C, stabilised sucrose 1,40978 nD 15 ml
Refractive index standard at 20 °C, stabilised sucrose 1,42009 nD 15 ml
Refractive index standard at 20 °C, stabilised sucrose 1,43080 nD 15 ml
Refractive index standard at 20 °C, stabilised sucrose 1,44193 nD 15 ml
Cat. No.
85127.015
85129.015
85128.015
85130.015
85131.015
85132.015
85133.015
85134.015
85135.015
85136.015
85137.015
85138.015
vwr.com | VWR ® for calibration 7
PHYSICAL MEASUREMENT STANDARDS
REFRACTIVE INDEX STANDARD KITS FOR CALIBRATION
ACCORDING TO PH. EUR. 2.2.6
These standards are for the calibration of refractometers prior to use.
Description
Refractive index kit 1 (isooctane/water)
Refractive index kit 2 (toluene/water)
Refractive index
1,3915 / 1,3330
1,4969 / 1,3330
Pk
1 KIT
1 KIT
Cat. No.
85757.001
85758.001
Refractive index standard kits.
Description
Refractive index certified reference material
Refractive index certified reference material
Refractive index certified reference material
Refractive index certified reference material
Refractive index certified reference material
Refractive index certified reference material
Refractive index certified reference material
Refractive index certified reference material
Refractive index certified reference material
Refractive index certified reference material
Refractive index certified reference material
Refractive index certified reference material
Refractive index certified reference material
Refractive index certified reference material
Refractive index certified reference material
Refractive index certified reference material
Refractive index certified reference material
Refractive index certified reference material
Refractive index certified reference material
Refractive index certified reference material
8 VWR ® for calibration | vwr.com
Pack type
Glass bottle
Glass bottles
Glass bottle
Glass bottles
Glass bottle
Glass bottles
Glass bottle
Glass bottles
Glass bottle
Glass bottles
Glass bottle
Glass bottles
Glass bottle
Glass bottles
Glass bottle
Glass bottles
Glass bottle
Glass bottles
Glass bottle
Glass bottles
REFRACTIVE INDEX CERTIFIED REFERENCE MATERIAL AT 20, 25 AND 30 °C
Refractive Index Certified Reference Materials (CRMs) are ideal for verification and calibration of temperature controlled refractometers, with each CRM providing certified values for refractive index measurements at 20, 25 and 30 °C.
‒ Certified in strict accordance to ISO 17025 and ISO 17034 under UKAS accreditation
‒ Highest level of accreditation guarantee, providing the most credible certified data available worldwide
‒ All measurements are fully traceable to NIST and international protocols
‒ Low levels of uncertainty, ensuring maximum accuracy of data at hand and dependable results
‒ Available in single 10 ml volume tamper-evident glass bottles or as a multi-pack of
5 per material (includes set of disposable pipettes)
‒ 12 month shelf life
‒ Manufactured in the United Kingdom
Refractive Index is measured for many reasons and is useful for multiple applications. It is a parameter that provides valuable information into determining the concentration of liquid mixtures (i.e. any dissolved mixtures), as well as provide information into the sample’s purity and clarity. This is useful for identification and quality control purposes.
Many industries will use refractometers for quality control purposes, particularly within food and beverage industries, from portable handheld machines to bench topbased refractometers such as Abbe or automatic digital refractometers. Temperature controlled refractometers are ideal for high precision refractive index measurements.
These are ideal for food, beverage, pharmaceutical, medical and petrochemical industries and applications.
UKAS ISO 17025 & ISO 17034
5×10 ml
1×10 ml
5×10 ml
1×10 ml
5×10 ml
1×10 ml
5×10 ml
1×10 ml
5×10 ml
1×10 ml
Packed
1×10 ml
5×10 ml
1×10 ml
5×10 ml
1×10 ml
5×10 ml
1×10 ml
5×10 ml
1×10 ml
5×10 ml
1 SET
10 ml
1 SET
10 ml
1 SET
10 ml
1 SET
10 ml
1 SET
10 ml
Pk
10 ml
1 SET
10 ml
1 SET
10 ml
1 SET
10 ml
1 SET
10 ml
1 SET
1,4196
1,4206
1,4206
1,4573
1,4573
1,4941
1,4941
1,5349
1,5349
1,5440
1,5440
1,6556
1,6556
Nominal Refractive
Index at 25 °C
1,3325
1,3325
1,3891
1,3891
1,4023
1,4023
1,4196
Cat. No.
99177.100
99177.001
99178.100
99178.001
99179.100
99179.001
99180.100
99180.001
99181.100
99181.001
99182.100
99182.001
99183.100
99183.001
99184.100
99184.001
99185.100
99185.001
99186.100
99186.001
PHYSICAL MEASUREMENT STANDARDS
Sucrose (Brix) standard, stabilised.
Description
Sucrose (Brix) standard, stabilised, 0°
Sucrose (Brix) standard, stabilised, 5°
Sucrose (Brix) standard, stabilised, 7°
Sucrose (Brix) standard, stabilised, 10°
Sucrose (Brix) standard, stabilised, 11,2°
Sucrose (Brix) standard, stabilised, 11,5°
Sucrose (Brix) standard, stabilised, 12°
Sucrose (Brix) standard, stabilised, 12,5°
Sucrose (Brix) standard, stabilised, 14,9°
Sucrose (Brix) standard, stabilised, 15°
Sucrose (Brix) standard, stabilised, 20°
Sucrose (Brix) standard, stabilised, 25°
Sucrose (Brix) standard, stabilised, 30°
Sucrose (Brix) standard, stabilised, 35°
Sucrose (Brix) standard, stabilised, 40°
Sucrose (Brix) standard, stabilised, 45°
Sucrose (Brix) standard, stabilised, 50°
Sucrose (Brix) standard, stabilised, 55°
Sucrose (Brix) standard, stabilised, 60°
Sucrose (Brix) standard, stabilised, 67,5°
SUCROSE (BRIX) STANDARDS, STABILISED SOLUTIONS FOR REFRACTOMETRY
A range of Brix/refractive index standards for ease of use when calibrating all types of refractometers.
‒ Manufactured using high purity raw materials
‒ Contain the same raw materials as the ICUMSA range, but are stabilised to have an extended shelf life of 12 months
These products represent excellent value for users that are not required to follow
ICUMSA guidelines.
Note: The Brix scale is shown with the degree type symbol (x°) but it equates to the
% concentration of the stabilised sucrose solution used.
Therefore 0° = 0% concentration
5° = 5% concentration
* The refractive index value in the table below refers to the nominal refractive index and is taken from the ICUMSA published tables for all product numbers except
87022.015 (Brix value 67,5°) which is a measured value.
Refractive index
1.332986
1.340264
1.343253
1.347824
1.349682
1.350149
1.35093
1.351714
1.355519
1.355679
1.363842
1.372328
1.381149
1.390322
1.39986
1.409777
1.420087
1.4308
1.441928
1.45929
Pk
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
UV/Vis standards.
UV/VIS STANDARDS
For spectrophotometer calibration according to European Pharmacopoeia (Ph. Eur.)
‒ Absorbance control
‒ Testing of resolution power
‒ Stray light testing
‒ Wavelength accuracy testing
In the pharmaceutical industry, a regular check of UV/Visible spectrophotometers according to Ph. Eur. is mandatory. Even in other industries, researchers who are using
UV/Visible spectrophotometers, and who are working according to e.g. GMP, GLP, USP or ISO guidelines, need to check and qualify their instruments on a regular basis.
Description
UV/Vis standard 1, for absorbance control
UV/Vis standard 1A, for absorbance control
UV/Vis standard 2, for stray light testing
Pk
Set of 2 x 10 ml Potassium Dichromate Solution (235-350nm) and 6 x 10 ml blank
Set of 2 x 10 ml Potassium Dichromate Solution (430nm) and 6 x 10 ml blank
Sodium Nitrite Solution (3 x 10 ml)
UV/Vis standard 3, for stray light testing Sodium Iodide Solution (3 x 10 ml)
UV/Vis standard 4, for stray light testing Potassium Chloride Solution (3 x 10 ml)
UV/Vis standard 5, toluene solution in n-hexane for resolution testing Set of 2 x 10 ml Toluene/ Hexane Solution and 6 x 10 ml Blank
UV/Vis standard 6, for wavelength testing Holmium Oxide Solution (3 x 10 ml)
Cat. No.
86124.001
86125.001
86126.001
86127.001
86128.001
86129.001
86130.001
Cat. No.
87000.015
87001.015
87002.015
87003.015
87004.015
87005.015
87006.015
87007.015
87008.015
87009.015
87011.015
87012.015
87013.015
87014.015
87015.015
87016.015
87018.015
87019.015
87021.015
87022.015
vwr.com | VWR ® for calibration 9
PHYSICAL MEASUREMENT STANDARDS
UV/VIS SPECTROSCOPY STANDARDS
The checking of UV/Visible spectrophotometers is required in many industries that use standards and guidelines, such as GLP, GMP and ISO 9001, to check their analytical systems at regular intervals, and to document such checks. VWR Chemicals offer ready to use chemicals for individual analyses or sealed cuvettes that avoid any additional handling.
Linearity standards
Description Pk
Supplied in 100 ml amber glass bottles - 235, 257, 313 and 350 nm
Blank - 0,001 M perchloric acid
Potassium dichromate absorbance/transmission standard - concentration mg/l
-
20
40
60
80
100
Supplied in 100 ml amber glass bottles - 213 and 261 nm
Blank - 0,1 M hydrochloric acid
Nicotinic acid absorbance/transmission standard - concentration mg/l
-
6
12
18
24
Set contents - full sets - supplied in permenantly sealed UV cuvettes
Potassium dichromate linearity standards at 235, 257, 313 and
350 - 0 mg/l, 20 mg/l, 40 mg/l, 60 mg/l, 80 mg/l, 100 mg/l (6 permanently sealed UV cuvettes plus blank)
Nicotinic acid linearity standard set - 0 mg/L, 6 mg/L, 12 mg/L,
18 mg/L, 24 mg/L at 213 and 261 nm (set of 5 permanently sealed
UV cuvettes plus blank)
Stray light standards
Substance Cut-off filter wavelength (nm)
Supplied in 100 ml amber glass bottles
Stray light blank -
Potassium chloride
Sodium chloride
Lithium carbonate
200
205
227
Sodium iodide
Potassium iodide
260
260
Sodium nitrite 390
Supplied in single permenantly sealed cuvettes
Potassium chloride
Sodium chloride
Lithium carbonate
Sodium iodide
Potassium iodide
Sodium nitrite
200
205
227
260
260
390
Cat. No.
84756.180
84757.180
84758.180
84759.180
84760.180
84761.180
84767.180
84768.180
84769.180
84770.180
84771.180
Absorbance/transmission standards
Description
Single cuvettes with blank - 235, 257, 313 and 350 nm
Potassium dichromate absorbance/transmission standard - concentration mg/l
Single cuvettes with blank - 213 and 261nm
Nicotinic acid absorbance/transmission standard - concentration mg/l
Cat. No.
84829.180
84789.180
84788.180
84787.180
84786.180
84785.180
84784.180
84783.600
84782.600
84781.600
84780.600
84779.600
84778.600
84750.600
84762.600
Wavelength standards
Substance
UV/Vis wavelength standard (nm), certified at 0,1 nm, 0,2 nm, 0,5 nm,
1,0 nm, 2,0 nm and 5 nm slit widths
Supplied in 100 ml amber glass bottles
Samarium solution
Holmium oxide solution
235 - 480
240 - 640
Didymium solution 298 - 865
Supplied in single permanently sealed UV cuvette
Samarium solution
Holmium oxide solution
Didymium solution
235 - 480
240 - 640
298 - 865
Bandwidth standards
Description
Supplied in 100 ml amber glass bottles
Bandwidth standard - blank - ratio of 268,7 nm peak to 266,8 nm trough
Bandwidth standard - toluene in hexane - ratio of
268,7 nm peak to 266,8 nm trough
Supplied in single permenantly sealed cuvettes
Blank - ratio of 268,7 nm peak to 266,8 nm trough
Toluene in hexane - with blank, ratio of 268,7 nm peak to 266,8 nm trough
Pk
-
-
Sealed cuvette
2 sealed cuvettes
Pk
20
40
60
80
100
6
12
18
24
Cat. No.
84795.180
84833.180
84832.600
84830.600
Cat. No.
84751.600
84752.600
84753.600
84754.600
84755.600
84763.600
84764.600
84765.600
84766.600
Cat. No.
84776.180
84777.180
84775.180
84773.600
84774.600
84772.600
Potassium dichromate in sulphuric acid.
Description
Potassium dichromate solutions set
10 VWR ® for calibration | vwr.com
STANDARD SOLUTION SET (POTASSIUM DICHROMATE SOLUTIONS)
FOR CALIBRATION OF UV/VISIBLE SPECTROPHOTOMETERS
A set for linearity check of the absorbance of spectrophotometers.
A set of reagents for calibration of spectrophotometers, to provide the user with a range two different concentration of potassium dichromate and additional sulphuric acid as a reference solution.
Set contains
‒ 1x250 ml potassium dichromate 50 mg/L in H₂SO₄ (0,005 M)
‒ 1x250 ml potassium dichromate 100 mg/L in H₂SO₄ (0,005 M)
‒ 2x250 ml sulphuric acid (0,005 M)
Pk
1 SET
Cat. No.
85969.001
PHYSICAL MEASUREMENT STANDARDS
Holmium perchlorate standard solution 100 ml
HOLMIUM PERCHLORATE STANDARD SOLUTION FOR WAVELENGTH CALIBRATION
OF SPECTOPHOTOMETERS, REAG. PH. EUR
Description
Holmium perchlorate standard solution, Reag. Ph. Eur
Holmium perchlorate standard solution, Reag. Ph. Eur
Pk
30 ml
100 ml
Cat. No.
85970.030
85970.180
Osmolality standards
Description
Osmolality Standard
Osmolality Standard, CRM acc. Ph. Eur. 2.2.35
Osmolality Standard, CRM acc. Ph. Eur. 2.2.35
Osmolality Standard
Osmolality Standard, CRM acc. Ph. Eur. 2.2.35
Osmolality Standard, CRM acc. Ph. Eur. 2.2.36
Osmolality Standard, CRM acc. Ph. Eur. 2.2.37
Osmolality Standard, CRM acc. Ph. Eur. 2.2.38
Osmolality Standard, CRM acc. Ph. Eur. 2.2.39
Osmolality Standard
Osmolality Standard
Osmolality Standard
Osmolality Standard
Osmolality Standard
OSMOLALITY STANDARDS
Avantor now offers a comprehensive line of osmolality standards as
Certified Reference Materials (CRM) for the calibration of osmometers.
Intended use:
– Calibration of osmometers
– Validation of analytical methods
– Preparation of 'working reference samples'
– Detection limit and linearity studies
Osmolality standards (compatible with all osmometers) are aqueous solutions of known osmolality containing high purity sodium chloride dissolved in 18 MOhm deionised water (filtered through a 0,22 µm filter). Metrological traceability is assured through calibration on a osmometer. The calibration curve is drawn using standard solutions prepared gravimetrically acc. to table 2.2.35-1 from
European Pharmacopoeia. All contributions in relation to the preparation of standard solutions are considered when evaluating the uncertainty.
Measurement results are traceable to SI. All analytical balances used for the preparation of the solution are calibrated yearly under an in-house procedure with class E1 and class E2 analytical weights, traceable to DKD and are daily checked.
Class A laboratory glassware is used. The results from temperature measurement are traceable to SI. The thermometers used for the solution's calibration are calibrated from an ISO 17025 accredited laboratory. Ambient conditions are controlled with a hygrometer calibrated from an ISO 17025 accredited laboratory.
– All products are CRM acc. ISO 17025 and ISO 17034.
– According to Ph. Eur. 2.2.35 (for 100, 200, 300, 400, 500, 600 and 700 mOsm/kg).
– Supplied in handy sets of 12x5 ml (3 packs of 4x5 ml). 24 months shelf life
– Ready to use in convenient ampoules.
Osmolality ()
50 mOsm/kg H₂O
100 mOsm/kg H₂O
200 mOsm/kg H₂O
290 mOsm/kg H₂O
300 mOsm/kg H₂O
400 mOsm/kg H₂O
500 mOsm/kg H₂O
600 mOsm/kg H₂O
700 mOsm/kg H₂O
850 mOsm/kg H₂O
900 mOsm/kg H₂O
1000 mOsm/kg H₂O
1500 mOsm/kg H₂O
2000 mOsm/kg H₂O
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
Pk
1 SET
1 SET
1 SET
1 SET
1 SET
3 SET
1 SET
Cat. No.
88270.001
88271.001
88272.001
88273.001
88274.001
88275.001
88276.001
88277.001
88278.001
88279.001
88280.001
88281.001
88282.001
88283.001
vwr.com | VWR ® for calibration 11
PHYSICAL MEASUREMENT STANDARDS
Description
Certified reference material, Cleveland Open Cup flash point
Certified reference material, Cleveland Open Cup flash point
Certified reference material, Cleveland Open Cup flash point
Certified reference material, Cleveland Open Cup flash point (lubricant)
1 SET = 3x80ml
CERTIFIED REFERENCE MATERIAL, CLEVELAND OPEN CUP FLASH POINT
Flash Point Certified Reference Materials are for the verification of laboratory flash point instruments that are used in testing petroleum and derivative products.
COC Flash Point Standards are tested and certified in accordance with ASTM D92
‘Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester.’
‒ Fully certified in accordance with ISO 17025 and ISO 17034
‒ Highest level of accreditation guarantee, providing the most credible data currently available worldwide
‒ All data generated exclusively by ISO 17025 accredited independent laboratories
‒ Ensures good inter-laboratory correlation
‒
‒ Fully traceable to International Standards
‒
Certified in accordance with ASTM / EN or IP test method protocols
Supplied in tamper-evident UN compliant security pack
Flash Point Certified Reference Materials are for the verification of laboratory flash point instruments that are used in testing petroleum and derivative products. These
CRMs are used for Cleveland Open Cup (ASTM D92, IP 36, ISO 2592).
UKAS ISO 17025 & ISO 17034
The flash point given in the ordering table below is the nominal flash point - actual batch values are given in the certification documents supplied with the product and also on the label.
Flash point
111,0 °C
161,4 °C
262,0 °C
256,8 °C
Pk
1 SET
1 SET
1 SET
250 ml
Cat. No.
99149.001
99150.001
99151.001
99114.230
Description
Certified reference material, Pensky-Martens flash point, diesel
Certified reference material, Pensky-Martens flash point
Certified reference material, Pensky-Martens flash point, lubricant
Certified reference material, Pensky-Martens flash point
Certified reference material, Pensky-Martens flash point, lubricant
Certified reference material, Pensky-Martens flash point
1 SET = 3x80ml
CERTIFIED REFERENCE MATERIAL, PENSKY MARTENS FLASH POINT
Flash Point Certified Reference Materials are for the verification of laboratory flash point instruments that are used in testing petroleum and derivative products.
PMCC Flash Point Standards are tested and certified in accordance with ASTM
D93 ‘Standard Test Method for Flash Point by Pensky Martens Closed Cup Tester
- Procedure A’
‒ Fully certified in accordance with ISO 17025 and ISO 17034
‒ Highest level of accreditation guarantee, providing the most credible data currently available worldwide
‒ All data generated exclusively by ISO 17025 accredited independent laboratories
‒ Ensures good inter-laboratory correlation
‒
‒ Fully traceable to International Standards
‒
Certified in accordance with ASTM / EN or IP test method protocols
Supplied in tamper-evident UN compliant security pack
Flash Point Certified Reference Materials are for the verification of laboratory flash point instruments that are used in testing petroleum and derivative products. These
CRMs are used for Pensky-Martens Closed Cup (ASTM D93, IP 34, ISO 2719).
UKAS ISO 17025 & ISO 17034
The flash point given in the ordering table below is the nominal flash point - actual batch values are given in the certification documents supplied with the product and also on the label.
Flash point
56,2 °C
76,5 °C
100,7 °C
135,4 °C
190,5 °C
210,5 °C
Pk
250 ml
1 SET
250 ml
1 SET
250 ml
1 SET
Cat. No.
99115.230
99152.001
99113.230
99153.001
99112.230
99154.001
12 VWR ® for calibration | vwr.com
12
PHYSICAL MEASUREMENT STANDARDS
FLASH POINT REFERENCE STANDARD, CLEVELAND OPEN CUP
COC Flash Point Standards are tested and certified in accordance with ASTM D92
‘Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester.’
‒ Certified according to ISO 17025 / ISO 17034 under UKAS accreditation
‒ One bottle per test ensures zero contamination / high-end volatile loss
‒ Fully traceable to International Standards
‒ Supplied with MSDS
‒ Tamper-evident security packaging
‒ 12 month shelf life
These UKAS certified standards are specifically designed to be used for regular instrument performance checks. Packed uniquely in 3x80 ml ‘single shot’ bottles ensuring the highest level of sample integrity. An economical, time saving addition to any laboratory concerned with the generation of valid analytical test data. Typically used in, but not limited to, the analysis of petroleum products with flash points above
79 °C (175 °F) and below 400 °C (752 °F)
UKAS ISO 17025 & ISO 17034
The flash point given in the ordering table below is the nominal flash point - actual batch values are given in the certification documents supplied with the product and also on the label.
Description
Flash point reference standard, Cleveland Open Cup
Flash point reference standard, Cleveland Open Cup
Flash point reference standard, Cleveland Open Cup
Flash point reference standard, Cleveland Open Cup
Flash point reference standard, Cleveland Open Cup
1 SET = 3x80ml
Flash point
84 °C
164 °C
205 °C
259 °C
118 °C
Description
Flash point reference standard, Pensky-Martens
Flash point reference standard, Pensky-Martens
Flash point reference standard, Pensky-Martens
Flash point reference standard, Pensky-Martens
Flash point reference standard, Pensky-Martens
Flash point reference standard, Pensky-Martens
1 SET = 3x80ml
Test method
ASTM D92
ASTM D92
ASTM D92
ASTM D92
ASTM D92
Pk
1 SET
1 SET
1 SET
1 SET
1 SET
Cat. No.
99161.001
99162.001
99163.001
99164.001
99165.001
FLASH POINT REFERENCE STANDARD, PENSKY-MARTENS
PMCC Flash Point Standards are tested and certified in accordance with
ASTM D93 ‘Standard Test Method for Flash Point by Pensky Martens Closed
Cup Tester - Procedure A’
‒ Certified according to ISO 17025 / ISO 17034 under UKAS accreditation
‒ One bottle per test ensures zero contamination / high-end volatile loss
‒ Fully traceable to International Standards
‒ Supplied with MSDS
‒ Tamper-evident security packaging
‒ 12 month shelf life
Procedure A is applicable to distillate fuels - diesels, bio-diesel blends, kerosene, heating oil, turbine fuels and lubricating oils. These UKAS certified standards are specifically designed to be used for regular instrument performance checks. Packed uniquely in 3x80 ml ‘single shot’ bottles ensuring the highest level of sample integrity.
An economical, time saving addition to any laboratory concerned with the generation of valid analytical test data. Typically used in, but not limited to, the analysis of petroleum products with flash points above 40 °C and below 360 °C.
UKAS ISO 17025 & ISO 17034
The flash point given in the ordering table below is the nominal flash point - actual batch values are given in the certification documents supplied with the product and also on the label.
Flash point
55,0 °C
75,5 °C
109,0 °C
137,5 °C
175,0 °C
219,5 °C
Pk
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
Cat. No.
99155.001
99156.001
99157.001
99158.001
99159.001
99160.001
vwr.com | VWR ® for calibration 13
PHYSICAL MEASUREMENT STANDARDS
Description
Flash point reference standard, Abel Closed Cup, jet aviation fuel
FLASH POINT REFERENCE STANDARD, ABEL CLOSED CUP, JET AVIATION FUEL
Flash Point Certified Reference Material for the calibration and verification of laboratory instruments used in testing petroleum and derivative products for Abel
Closed-Cup (IP 170, ISO 13736).
‒ Certified according to ISO 17025 / ISO 17034 under UKAS accreditation
‒ Fully traceable to International Standards
‒
‒ Tamper-evident security packaging
‒
Supplied with MSDS
12 month shelf life
UKAS ISO 17025 & ISO 17034
The flash point given in the ordering table below is the nominal flash point - actual batch values are given in the certification documents supplied with the product and also on the label.
Flash point
41,2 °C
Test method
IP 170, ISO 13736
Pk
250 ml
Cat. No.
99116.230
Description
Flash point reference standard, TAG closed cup, jet aviation fuel
FLASH POINT REFERENCE STANDARD, TAG CLOSED CUP, JET AVIATION FUEL
Flash Point Certified Reference Material for the calibration and verification of laboratory instruments used in testing petroleum and derivative products for TAG
Closed Cup (ASTM D56).
‒ Certified according to ISO 17025 / ISO 17034 under UKAS accreditation
‒ Fully traceable to International Standards
‒
‒ Tamper-evident security packaging
‒
Supplied with MSDS
12 month shelf life
UKAS ISO 17025 & ISO 17034
The flash point given in the ordering table below is the Nominal flash point - the actual batch values are given in the certification documents supplied with the product and also on the label.
Flash point
40,4 °C
Test method
ASTM D56
Pk
250 ml
Cat. No.
99117.230
For more options, visit vwr.com
Solutions for every day use
VWR ® VOLUMETRIC FLASKS
Volumetric flasks for precise measurement in solution preparation and dilution are available at Avantor. Select models of borosilicate glass, nalgene, or other plastics that conform to Class A or Class B requirements. Purchase volumetric flasks individually or by the case.
14 VWR ® for calibration | vwr.com
PB19039-NA
PHYSICAL MEASUREMENT STANDARDS
VISCOSITY STANDARDS
These standards can be used for calibration, control, verification, qualification or method validation of kinematic and dynamic viscosity measurement instruments (both manual and automatic). Each standard is certified for kinematic viscosity (mm 2 /s, cSt), dynamic viscosity (cP) and density (g/ml) at a range of temperatures.
‒ Manufactured from high quality, stable base oils and additives
‒ Extended shelf life with secure package
‒ All standards observe Newtonian fluid behaviour
These standards are traceable to the ITS 90 temperature scale and the universally accepted primary standard value of the viscosity of water at
20 °C, defined as 1,0034 mm 2 /s (cSt) by ISO 3666.
Certified according to ASTM D2162 using Ubbelohde master viscometers and ISO 17025 accreditation for calibration.
Viscosity standards (CSt), supplied in packs of 500 ml
59
88
110
160
210
14
20
30
43
2,9
4,4
6,7
10 at 20 °C
0,47
0,74
1,3
7900
8400
100000
19000
28000
41000
58000
77000
320
400
550
790
980
1400
1800
2600
3300
4900
47
66
87
120
160
12
16
24
34
2,6
3,9
5,8
8,7 at 25 °C
0,45
0,7
1,2
5800
5300
64000
12000
17000
25000
36000
47000
230
300
400
580
710
1000
1300
1800
2300
3500
27
35
48
60
83
8
11
15
20
2,1
3
4,2
6 at 37,78 °C
0,41
1
0,61
2800
1900
-
4000
-
-
6000
8000
110
160
200
280
340
470
590
850
1100
1600
25
32
44
54
75
7,5
10
14
18
2
2,9
4
5,7 at 40 °C
0,4
0,6
0,97
2500
1600
18000
3400
5100
6700
10000
13000
98
140
180
250
310
410
520
750
940
1400
18
21
30
35
50
5,8
7,5
10
13
1,7
2,4
3,2
4,4 at 50 °C
-
-
0,87
1500
810
8500
1,700
2500
3200
4900
6100
190
250
310
450
560
30
61
90
110
160
85093.260
85079.260
85083.260
85086.260
85099.260
85091.260
85072.260
85076.260
85080.260
85094.260
85077.260
85085.260
85088.260
85100.260
85073.260
85324.260
Cat. No.
85067.260
85068.260
85069.260
85078.260
85095.260
85084.260
85097.260
85089.260
85070.260
85074.260
85092.260
85081.260
85082.260
85087.260
85098.260
85090.260
85071.260
85075.260
vwr.com | VWR ® for calibration 15
PHYSICAL MEASUREMENT STANDARDS
Viscosity standard, general purpose
Description
Standard with certified values at 20 °C to 40 °C
Standard with certified values at 20 °C to 40 °C
Standard with certified values at 20 °C to 50 °C
Standard with certified values at 20 °C to 60 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
Standard with certified values at 20 °C to 100 °C
16 VWR ® for calibration | vwr.com
No.
N350
N415
D1000
S600
N750
N1000
N1400
S2000
D5000
N26
N35
N44
S60
N75
N100
N140
S200
N250
D500
N2500
D7500
N4000
N5100
S8000
N10200
N15000
N18000
S30000
N.4
N.8
N1.0
N2
S3
D5
S6
N7.5
D10
N10
N14
S20
GENERAL PURPOSE VISCOSITY STANDARDS
These ISO 17025 & ISO 17034 certified general purpose viscosity standards provide certified kinematic viscosity, dynamic viscosity and density data across temperature ranges from 20 to 100 °C.
‒ Certified in strict accordance with ASTM D2162
‒ Density g/ml in accordance with ASTM D1480
‒ For use with glass capillary viscometers, automatic viscometers and other viscosity measuring equipment
‒ Kinematic (cSt) and dynamic viscosity (mPa·s) given at all temperatures
‒
‒ Ensures full compliance to ASTM and IP test method protocols
‒
Fully traceable to National Standards
Tamper-evident security packaging
Certified in strict accordance with ASTM D2162, the primary method for viscosity standards manufacture.
These products have been tested at primary level using master viscometers in accordance with ASTM D2162 to ensure the lowest uncertainty of measurement, thus providing standards that are certified with primary level accuracy. ASTM D2162 is the only referenced method for the certification of viscosity standards when adopting
ASTM test method protocols.
Certified according to ISO 17025 / ISO 17034 under UKAS accreditation.
The viscosity value given in the ordering table below is the nominal viscosity value - actual batch values are given in the certification documents supplied with the product and also on the label.
Test method
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
Viscosity at 25 °C
0,2950 mPa.s
0,5204 mPa.s
0,9525 mPa.s
2,144 mPa.s
3,291 mPa.s
4,745 mPa.s
7,442 mPa.s
8,559 mPa.s
10,37 mPa.s
14,42 mPa.s
20,4 mPa.s
29,04 mPa.s
48,59 mPa.s
55,36 mPa.s
71,11 mPa.s
100,7 mPa.s
124,9 mPa.s
202,6 mPa.s
258 mPa.s
392 mPa.s
488,1 mPa.s
494 mPa.s
717,4 mPa.s
796,5 mPa.s
990,9 mPa.s
1273 mPa.s
1690 mPa.s
2610 mPa.s
3481 mPa.s
4599 mPa.s
5738 mPa.s
6618 mPa.s
7657 mPa.s
10030 mPa.s
15406 mPa.s
19588 mPa.s
30991 mPa.s
40049 mPa.s
54900 mPa.s
72328 mPa.s
Packed
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Cat. No.
99463.260
99439.260
99476.260
99468.260
99452.260
99453.260
99471.260
99442.260
99458.260
99443.260
99464.260
99465.260
99477.260
99450.260
99454.260
99455.260
99473.260
99444.260
99445.260
99446.260
99456.260
99472.260
99440.260
99474.260
99466.260
99438.260
99447.260
99448.260
99469.260
99459.260
99460.260
99462.260
99475.260
99467.260
99449.260
99451.260
99470.260
99457.260
99441.260
99461.260
Pk
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
PHYSICAL MEASUREMENT STANDARDS
Description
Check oil 5W30
Check oil 5W30
Check oil 10W30
New standards for
Petrochemistry brochure
Viscosity at 40 °C
65,90 mm²/s
65,90 mm²/s
67,27 mm²/s
Pk
500 ml
5 L
500 ml
VISCOSITY CHECK OILS
The viscosity values for the certified viscosity check oils have been tested and certified at typical blend targets. These check oils are for validating the performance of cold cranking simulators and kinematic viscometers by measuring commercially available formulated engine oils.
‒ Kinematic viscosity mm 2 /s (cSt) in accordance with ASTM D445
‒ Fully traceable to National Standards
‒ Tamper-evident security packaging
Kinematic viscosity measurements have been made in accordance with ASTM D445, using reference viscometers certified in accordance with ASTM D446 and ASTM D2162.
Values for density (ASTM D4052), CCS Dynamic Viscosity mPa.s (cP) in accordance with ASTM D5293 and Viscosity Index in accordance with ASTM D2270 are provided with documentation.
Manufactured and certified in strict accordance with the requirements of ISO 17025 and ISO 17034.
The kinematic viscosity value given in the ordering table below is the nominal kinematic viscosity value - actual batch values are given in the certification documents supplied with the product and also on the label.
Cat. No.
99170.260
99170.360
99171.260
Description
Check oil 10W30
Check oil 15W40
Check oil 15W40
Viscosity at 40 °C
67,27 mm²/s
103,1 mm²/s
103,1 mm²/s
Pk
5 L
500 ml
5 L
Cat. No.
99171.360
99172.260
99172.360
Description
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
Description
Sets
CCS viscosity standard kit 8
CCS viscosity standard kit 14
CCS viscosity standard kit 18
CL15
CL16
CL17
CL19
CL20
CL22
CL24
No.
CL08
CL09
CL10
CL11
CL12
CL13
CL14
No.
VIS-CCS-8
VIS-CCS-14
VIS-CCS-18
Viscosity (mPa s) Pk
(–35,00°C) 857,1 500 ml
(–35,00°C) 1175 500 ml
(–30,00°C) 896,2 500 ml
(–30,00°C) 1035
(–25,00°C) 770,4
(–25,00°C) 980,1
(–20,00°C) 826,1
500 ml
500 ml
500 ml
500 ml
(–20,00°C) 921,0
(–20,00°C) 1186
(–15,00°C) 872,6
(–15,00°C) 1075
(–10,00°C) 870,7
(–10,00°C) 1030
(–10,00°C) 1211
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
COLD CRANKING SIMULATOR (CCS) VISCOSITY STANDARDS
High quality CCS Viscosity Standards are ideal for the calibration and verification of analytical equipment used in Cold Cranking Simulator (CCS) testing.
‒ Full traceability to National Standards
‒ Ensures full compliance to ASTM and IP test method protocols
‒ Tamper-evident security packaging
‒ CCS kits available (set of 8, 14 or 18)
These Cold Cranking Simulator (CCS) Viscosity Standards are for the calibration and verification of analytical equipment used in Cold Cranking Simulator (CCS) testing to
ASTM D5293 and SAE Specification J300.
Certified according to ISO 17025 / ISO 17034 under UKAS accreditation.
The viscosity value given in the ordering table below is the nominal viscosity value - actual batch values are given in the certification documents supplied with the product and also on the label.
Cat. No.
99376.260
99377.260
99378.260
99379.260
99380.260
99381.260
99382.260
99383.260
99384.260
99385.260
99386.260
99387.260
99388.260
99389.260
Description
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CCS viscosity standard
CL42
CL48
CL53
CL60
CL68
CL74
No.
CL25
CL26
CL28
CL30
CL32
CL34
CL38
Viscosity (mPa s) Pk
(–10,00°C) 1376 500 ml
(–10,00°C) 1680
(–10,00°C) 2016
500 ml
500 ml
(–10,00°C) 2431
(–10,00°C) 3049
(–10,00°C) 3431
(–10,00°C) 4199
500 ml
500 ml
500 ml
500 ml
(–10,00°C) 4969
(–10,00°C) 6135
(–10,00°C) 7440
(–10,00°C) 9303
(–10,00°C) 11417
(–10,00°C) 12567
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
Cat. No.
99390.260
99391.260
99392.260
99393.260
99394.260
99395.260
99396.260
99397.260
99398.260
99399.260
99400.260
99401.260
99402.260
Type
8 Set: CL14, CL19, CL22, CL25, CL28, CL32, CL48, CL68.
14 Set: CL10, CL12, CL14, CL16, CL19, CL22, CL25 (2) , CL28, CL32, CL38, CL48, CL60, CL68.
18 Set: CL08, CL09, CL10, CL11, CL12, CL13, CL14, CL15, CL16, CL19, CL22, CL25(x2), CL28, CL32, CL38, CL48 & CL60.
Pk
1 SET
1 SET
1 SET
Cat. No.
99403.001
99404.001
99405.001
vwr.com | VWR ® for calibration 17
PHYSICAL MEASUREMENT STANDARDS
CONE AND PLATE VISCOSITY STANDARDS
High quality Cone & Plate Viscosity Standards are ideal for the paints and coatings industry.
‒ Kinematic viscosity certified in strict accordance with ASTM D2162 at 20, 23 and
25 °C
‒ Kinematic viscosity certified in accordance with ASTM D341 at intermediate temperatures
‒ Density, dynamic viscosity and kinematic viscosity quoted at all temperatures
‒ Ensures full compliance to ASTM and IP test method protocols and had full traceability to National Standards
‒ Tamper-evident security packaging
Certified according to ISO 17025 / ISO 17034 under UKAS accreditation. The viscosity value given in the ordering table below is the nominal viscosity value - actual batch values are given in the certification
No.
2162/ 21
2162/ 22
2162/ 1
2162/ 2
2162/ 3
2162/ 4
2162/ 5
2162/ 6
2162/ 7
2162/ 8
2162/ 9
2162/ 10
Cone & plate viscosity standard 20.00 °C, 21.00 °C, 22.00 °C, 23.00 °C, 24.00 °C & 25.00 °C
Viscosity at
25 °C Test method Pack type Pk
14,50 mPa.s
ASTM D2162 / ASTM D341 Glass bottle 500 ml
28,97 mPa.s
ASTM D2162 / ASTM D342 Glass bottle 500 ml
56,14 mPa.s
ASTM D2162 / ASTM D343 Glass bottle 500 ml
75,19 mPa.s
ASTM D2162 / ASTM D344 Glass bottle 500 ml
100,4 mPa.s
ASTM D2162 / ASTM D345 Glass bottle 500 ml
150,0 mPa.s
ASTM D2162 / ASTM D346 Glass bottle 500 ml
200,4 mPa.s
ASTM D2162 / ASTM D347 Glass bottle 500 ml
250,2 mPa.s
ASTM D2162 / ASTM D348 Glass bottle 500 ml
300,8 mPa.s
ASTM D2162 / ASTM D349 Glass bottle 500 ml
351,1 mPa.s
ASTM D2162 / ASTM D350 Glass bottle 500 ml
391,0 mPa.s
ASTM D2162 / ASTM D351 Glass bottle 500 ml
498,1 mPa.s
ASTM D2162 / ASTM D352 Glass bottle 500 ml
Cat. No.
99419.260
99420.260
99406.260
99417.260
99422.260
99423.260
99424.260
99425.260
99426.260
99427.260
99428.260
99407.260
No.
2162/ 11
2162/ 12
2162/ 13
2162/ 24
2162/ 14
2162/ 15
2162/ 16
2162/ 17
2162/ 18
2162/ 19
2162/ 20
Cone & plate viscosity standard 20.00 °C, 21.00 °C, 22.00 °C, 23.00 °C, 24.00 °C & 25.00 °C
Viscosity at
25 °C
714,8 mPa.s
1008 mPa.s
1517 mPa.s
Test method Pack type Pk
ASTM D2162 / ASTM D353 Glass bottle 500 ml
ASTM D2162 / ASTM D354 Glass bottle 500 ml
ASTM D2162 / ASTM D355 Glass bottle 500 ml
2044 mPa.s
ASTM D2162 / ASTM D356 Glass bottle 500 ml
2506 mPa.s
ASTM D2162 / ASTM D357 Glass bottle 500 ml
3993 mPa.s
ASTM D2162 / ASTM D358 Glass bottle 500 ml
6055 mPa.s
ASTM D2162 / ASTM D359 Glass bottle 500 ml
8081 mPa.s
ASTM D2162 / ASTM D360 Glass bottle 500 ml
10030 mPa.s ASTM D2162 / ASTM D361 Glass bottle 500 ml
15166 mPa.s
ASTM D2162 / ASTM D362 Glass bottle 500 ml
20077 mPa.s ASTM D2162 / ASTM D363 Glass bottle 500 ml
Cat. No.
99408.260
99409.260
99410.260
99421.260
99411.260
99412.260
99413.260
99414.260
99415.260
99416.260
99418.260
Description
Standard with certified values at 20 °C & 25 °C
Standard with certified values at 20 °C & 25 °C
Standard with certified values at 20 °C & 25 °C
Standard with certified values at 20 °C & 25 °C
Standard with certified values at 20 °C & 25 °C
Standard with certified values at 20 °C & 25 °C
Standard with certified values at 20 °C & 25 °C
Standard with certified values at 20 °C & 25 °C
18 VWR ® for calibration | vwr.com
FLOW CUP VISCOSITY STANDARDS
Flow Cup Viscosity Standards are specifcally formulated for use with viscosity flow cups such as Ford, Shell and, Zahn.
‒ Certified in strict accordance with ASTM D2162
‒ Density g/ml in accordance with ASTM D1480
‒ Density, dynamic viscosity and kinematic viscosity quoted at all temperatures
‒ Ensures full compliance to ASTM and IP test method protocols
‒ Full traceability to National Standards
‒ Tamper-evident security packaging
Certified data for kinematic viscosity, dynamic viscosity and density at 20 °C and 25 °C including relevent flow cup information.
Each standard is dual-certified to ISO 17025 and ISO 17034 under UKAS.
The viscosity value given in the ordering table below is the nominal viscosity value - actual batch values are given in the certification documents supplied with the product and also on the label.
No.
C6
C10
C20
C35
C60
C100
C200
C600
Viscosity at 20 °C
8,945 mPa.s
17,78 mPa.s
37,22 mPa.s
72,9 mPa.s
135,9 mPa.s
281,4 mPa.s
557,7 mPa.s
1882 mPa.s
Test method
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
Packed
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Pk
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
Cat. No.
99435.260
99429.260
99431.260
99433.260
99436.260
99430.260
99432.260
99437.260
PHYSICAL MEASUREMENT STANDARDS
Description
High temp. viscosity standard, 20 °C through to 150 °C
High temp. viscosity standard, 20 °C through to 150 °C
High temp. viscosity standard, 20 °C through to 150 °C
High temp. viscosity standard, 20 °C through to 150 °C
High temp. viscosity standard, 20 °C through to 150 °C
High temp. viscosity standard, 20 °C through to 150 °C
High temp. viscosity standard, 20 °C through to 150 °C
High temp. viscosity standard, 20 °C through to 150 °C
High temp. viscosity standard, 20 °C through to 150 °C
High temp. viscosity standard, 25 °C, 60 °C & 135 °C
High temp. viscosity standard, 25 °C, 60 °C & 135 °C
High temp. viscosity standard, 100 °C, 110 °C, 120 °C, 130 °C, 140 °C & 150 °C
High temp. viscosity standard, 100 °C, 110 °C, 120 °C, 130 °C, 140 °C & 150 °C
High temp. viscosity standard, 100 °C, 110 °C, 120 °C, 130 °C, 140 °C & 150 °C
HIGH TEMPERATURE VISCOSITY STANDARDS
High Temperature Viscosity Standards are ideal for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely.
‒ Kinematic (cSt), dynamic viscosity (mPa·s) and density (g/ml) given at all temperatures
‒ Standard pack size is 500 ml, in tamper-evident packaging
‒ Fully traceable to National Standards
‒ Ensures full compliance to ASTM and IP test method protocols
Certified according to ISO 17025 / ISO 17034 under UKAS accreditation.
The viscosity value given in the ordering table below is the nominal viscosity value - actual batch values are given in the certification documents supplied with the product and also on the label.
No.
S6S
S20S
S60S
N100S
S200S
S600S
S2000S
S8000S
S30000S
N600
N2000
N100HT
S200HT
S600HT
Viscosity (mPa s)
(60 °C) 2,935
(60 °C) 7,806
(60 °C) 20,05
(60 °C) 34,33
(60 °C) 57,98
(60 °C) 149,2
(60 °C) 431,7
(60 °C) 1533
(60 °C) 4897
(60 °C) 149,2
(60 °C) 431,7
(100 °C) 11,57
(100 °C) 17,43
(100 °C) 36,15
Pk
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
Cat. No.
99491.260
99492.260
99493.260
99494.260
99495.260
99496.260
99497.260
99498.260
99499.260
99500.260
99501.260
99502.260
99503.260
99504.260
LOW TEMPERATURE VISCOSITY STANDARDS
Low Temperature Viscosity Standards have certified data for kinematic viscosity, dynamic viscosity and density for various low temperatures.
‒ Fully traceable to National Standards
‒ Ensures full compliance to ASTM and IP test method protocols
‒ Tamper-evident security packaging
Low Temperature Viscosity Standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely.
Certified according to ISO 17025 / ISO 17034 under UKAS accreditation.
The viscosity value given in the ordering table below is the nominal viscosity value - actual batch values are given in the certification documents supplied with the product and also on the label.
Description
Standard with certified values at –20 °C and –40 °C
Standard with certified values at –0 °C and –20 °C
Standard with certified values at –20 °C and –40 °C
Standard with certified values at –40 °C
Standard with certified values at –25 °C, –30 °C, –35 °C and –40 °C
Standard with certified values at –19 °C, –19.5 °C, –20 °C, –20.5 °C, –21 °C and –25 °C
Standard with certified values at –24 °C, –24.5 °C, –25 °C, –25.5 °C and –26 °C
Standard with certified values at –25 °C, –25.5 °C, –26 °C, –26.11 °C, –26.5 °C and –27 °C
Standard with certified values at 20 °F, 10 °F, 0 °F, –10 °F, –15 °F and –20 °F
Standard with certified values at –11 °C, –11.5 °C, –12 °C, –12.22 °C, –12.5 °C and –13 °C
Standard with certified values at –39 °C, –39.5 °C, –40 °C, –40.5 °C, and –41 °C
No.
N2B
JF1-H
J10
N14B
N27B
N105B
N400B
N480B
N115B
N1400B
N120B
Viscosity (mm²/s)
(–20 °C): 9,095
(–40 °C): 17,68
(–40 °C): 894,8
(–40 °C): 19605
(–40 °C): 24522
(–20 °C): 34202
(–25 °C): 68176
(–25 °C): 148029
(–20 °F): 158559
(–12 °C): 170492
(–40 °C): 172601
Pk
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
Cat. No.
99487.260
99479.260
99478.260
99485.260
99486.260
99481.260
99488.260
99489.260
99482.260
99484.260
99483.260
vwr.com | VWR ® for calibration 19
PHYSICAL MEASUREMENT STANDARDS
Medical Grade Viscosity Standard, 25.00 °C & 37.00 °C
No.
MGVS12
MGVS12
MGVS16
MGVS16
MGVS20
MGVS20
MGVS30
MGVS30
MGVS40
MGVS40
MGVS60
MGVS60
MGVS100
MGVS100
Viscosity at 25 °C
1,2 mPa.s
1,2 mPa.s
1,6 mPa.s
1,6 mPa.s
2,0 mPa.s
2,0 mPa.s
3,0 mPa.s
3,0 mPa.s
4,0 mPa.s
4,0 mPa.s
6,0 mPa.s
6,0 mPa.s
10,0 mPa.s
10,0 mPa.s
MEDICAL GRADE VISCOSITY STANDARDS
Medical Grade Viscosity Standards provide certified dynamic viscosity data at 25 and
37 °C, are dual-certified to ISO 17025 and ISO 17034 under UKAS and are ideal for the calibration and verification of viscosity measuring equipment.
‒ Full traceability to National Standards
‒ Contains anti-bacterial agent
‒ Tamper-evident security packaging
Certified according to ISO 17025 / ISO 17034 under UKAS accreditation.
The viscosity value given in the ordering table below is the nominal viscosity value - actual batch values are given in the certification documents supplied with the product and also on the label.
Test method
ASTM D2162
ASTM D2163
ASTM D2164
ASTM D2165
ASTM D2166
ASTM D2167
ASTM D2168
ASTM D2169
ASTM D2170
ASTM D2171
ASTM D2172
ASTM D2173
ASTM D2174
ASTM D2175
Pack type
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Pk
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
Cat. No.
99505.180
99505.260
99506.180
99506.260
99507.180
99507.260
99508.180
99508.260
99509.180
99509.260
99510.180
99510.260
99511.180
99511.260
Solutions for protection
VWR ® LAB SAFETY
‒ Eyewear
‒ Footwear
‒ First aid kits
‒ Gloves
‒ Hand cleaning
‒ Labcoats and apparel
‒ Respirators
‒ Spill kits
Discover this
VWR Handy
Solution Guide on vwr.com
PB18003-EN
20 VWR ® for calibration | vwr.com
PHYSICAL MEASUREMENT STANDARDS
Standard with certified values at 20 °C to 25 °C
No.
RTM8
RTM9
RTM10
RTM11
RTM12
RTM13
RTM14
RTM15
RTM16
RTM1
RTM2
RTM3
RTM4
RTM5
RTM6
RTM7
RTM17
RTM18
RTM19
RTM20
RTM21
RTM22
RTM23
RTM24
RTM25
RTM26
RTM27
RTM28
RTM29
RTM30
RTM31
RTM32
RTM33
RTM34
RTM35
RTM36
RTM37
RTM38
RTM39
Viscosity at 25 °C
0,3051 mPa.s
0,5204 mPa.s
0,9525 mPa.s
2,144 mPa.s
3,329 mPa.s
4,745 mPa.s
7,520 mPa.s
10,37 mPa.s
14,50 mPa.s
20,40 mPa.s
29,04 mPa.s
55,68 mPa.s
75,19 mPa.s
101,4 mPa.s
150,0 mPa.s
203,1 mPa.s
250,0 mPa.s
300,8 mPa.s
351,1 mPa.s
389,1 mPa.s
494,0 mPa.s
719,7 mPa.s
796,5 mPa.s
1008 mPa.s
1260 mPa.s
1517 mPa.s
2013 mPa.s
2556 mPa.s
4024 mPa.s
4588 mPa.s
5738 mPa.s
6055 mPa.s
7657 mPa.s
8081 mPa.s
10030 mPa.s
15166 mPa.s
19588 mPa.s
40049 mPa.s
72328 mPa.s
Test method
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
MINERAL OIL ROTATIONAL VISCOSITY STANDARDS
Mineral Oil Rotational Viscosity Standards are specifically formulated for use with rotational viscometers and are dual-certified to ISO 17025 and
ISO 17034 under UKAS.
‒ Certified in strict accordance with ASTM D2162 at 20 and 25 °C
‒ Density g/ml in accordance with ASTM D1480 at 20 and 25 °C
‒ Kinematic viscosity at other temperatures are calculated in accordance with
ASTM D341
‒ Densities at other temperatures are derived from proportional calculations of the measurements at 20 and 25 °C
‒ Inert glass packaging (500 ml) with tamper-evident cap provides absolute assurance of sample integrity
‒ Full traceability to National Standards
These mineral oil rotational viscosity standards are the first choice option where end users are unable to have silicone in their process. This range of standards provide both calibration and verification options for rotational viscometer test equipment.
Certified according to ISO 17025 / ISO 17034 under our UKAS accreditation.
The viscosity value given in the ordering table below is the nominal viscosity value
- actual batch values are given in the certification documents supplied with the product and also on the label.
Pack type
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Pk
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
Cat. No.
99545.260
99546.260
99547.260
99548.260
99549.260
99550.260
99551.260
99552.260
99553.260
99554.260
99555.260
99556.260
99557.260
99558.260
99559.260
99560.260
99561.260
99562.260
99563.260
99564.260
99565.260
99527.260
99528.260
99529.260
99530.260
99531.260
99532.260
99533.260
99534.260
99535.260
99536.260
99537.260
99538.260
99539.260
99540.260
99541.260
99542.260
99543.260
99544.260
vwr.com | VWR ® for calibration 21
PHYSICAL MEASUREMENT STANDARDS
SILICONE ROTATIONAL VISCOSITY STANDARDS
Silicone Rotational Viscosity Standards are specifically formulated for use with equipment with minimal temperature control. Supplied in 600 ml ‘ready to use’ packs specially designed to eliminate cleaning of laboratory glassware, which is inherently difficult due to the nature of silicone.
‒ Ensures full compliance to international test method protocols
‒ Full traceability to National Standards
‒ Tamper-evident security packaging
‒ Safer working, less mess, less waste, higher throughput
This range of standards provide both calibration and verification options for rotational viscometer test equipment.
Certified according to ISO 17025 / ISO 17034 under UKAS accreditation.
600 ml of product supplied in a ready to use ‘test in pack’ container.
Note: Applicable to all spindles with the exception of the L1 spindle, further provision should be made when using the L1 spindle
The viscosity value given in the ordering table below is the nominal viscosity value - actual batch values are given in the certification documents supplied with the product and also on the label.
Rotational Viscosity Standard, 20.00 °C & 25.00 °C
No.
VIS-RT5
VIS-RT10
VIS-RT50
VIS-RT75
VIS-RT100
VIS-RT250
VIS-RT350
VIS-RT500
Type
Silicone
Silicone
Silicone
Silicone
Silicone
Silicone
Silicone
Silicone
Viscosity at 25 °C
4,988 mPa.s
10,12 mPa.s
50,49 mPa.s
75,53 mPa.s
100,7 mPa.s
251,5 mPa.s
357,0 mPa.s
503,9 mPa.s
Pack type
HDPE container
HDPE container
HDPE container
HDPE container
HDPE container
HDPE container
HDPE container
HDPE container
Pk
600 ml
600 ml
600 ml
600 ml
600 ml
600 ml
600 ml
600 ml
Cat. No.
99521.271
99512.271
99522.271
99526.271
99514.271
99518.271
99520.271
99523.271
No.
VIS-RT1K
VIS-RT5K
VIS-RT10K
Type
Silicone
Silicone
Silicone
VIS-RT12K
VIS-RT30K
Silicone
Silicone
VIS-RT60K Silicone
VIS-RT100K Silicone
Viscosity at 25 °C
1003 mPa.s
5034 mPa.s
9970 mPa.s
12423 mPa.s
30036 mPa.s
60139 mPa.s
100075 mPa.s
Pack type
HDPE container
HDPE container
HDPE container
HDPE container
HDPE container
HDPE container
HDPE container
Pk
600 ml
600 ml
600 ml
600 ml
600 ml
600 ml
600 ml
Cat. No.
99516.271
99524.271
99513.271
99517.271
99519.271
99525.271
99515.271
SMALL SAMPLE VISCOSITY STANDARDS - ASTM D7279
These standards are certified in strict accordance with ASTM D2162 at 40 and
100 ºC under ISO 17025 and ISO 17034 accreditation, and have been manufactured specifically for the users of ASTM D7279, Standard Test Method for Kinematic
Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer and other similar type test equipment.
‒ Fully traceable to International Standards
‒ Ensures full compliance to ASTM and IP test method protocols
‒
‒ 60 ml pack is a lower volume cost effective solution
‒
Certified in strict accordance with ASTM D2162
Tamper-evident security packaging
ISO 17025 and ISO 17034 accreditations
The viscosity value given in the ordering table below is the nominal kinematic viscosity value - actual batch values are given in the certification documents supplied with the product and also on the label.
Viscosity at 40 °C
10,0 cSt
100,3 cSt
1009 cSt
1705 cSt
181,3 cSt
2,884 cSt
2094 cSt
23037 cSt
Test method
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
Pack type
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Pk
60 ml
60 ml
60 ml
60 ml
60 ml
60 ml
60 ml
60 ml
Cat. No.
99362.600
99365.600
99369.600
99370.600
99366.600
99360.600
99371.600
99375.600
Viscosity at 40 °C
3072 cSt
31,99 cSt
313,7 cSt
3351 cSt
5,697 cSt
524.8 cSt
54,13 cSt
6684 cSt
Test method
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
ASTM D2162
New standards for
Petrochemistry brochure
Pack type
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Glass bottle
Pk
60 ml
60 ml
60 ml
60 ml
60 ml
60 ml
60 ml
60 ml
Cat. No.
99374.600
99363.600
99367.600
99372.600
99361.600
99368.600
99364.600
99373.600
22 VWR ® for calibration | vwr.com
PAINTS AND COATINGS VISCOSITY STANDARDS
PAINTS AND COATINGS VISCOSITY STANDARDS
Paints and Coatings Viscosity Standards provide certified kinematic viscosity, dynamic viscosity, density and (where applicable) Krebs data across temperature ranges at 20, 23 and 25 °C, also includes the calculated flow time of the oil in 0,5 °C intervals. Ideal for those in the paints and coatings industry.
– Certified in strict accordance with ASTM D2162
– Density g/ml in accordance with ASTM D1480
– Calculated viscosity at temperatures at 0,5 °C intervals between 20 and 25 °C, and a calibration graph are included on the certificate.
– The calibration certificate quotes viscosity in mm²/s (centistokes), mPa.s
(centipoise) and (where applicable) Krebs units
– Fully traceable to National Standards ensuring full compliance to ASTM and IP test method protocols
These products are sold in 500 ml volume, tamper-evident packaging and are supplied with a 2 year shelf life.
This product range has been tested at primary level using master viscometers in accordance with ASTM D2162 to ensure the lowest uncertainty of measurement, thus providing standards that are certified with primary level accuracy. ASTM D2162 is the only referenced method for the certification of viscosity standards when adopting ASTM test method protocols.
All density measurements at 20, 23 and 25 °C have been made in accordance with ASTM D1480. Dynamic viscosities at 20, 23 and & 25 °C were calculated from these measured values. Temperature measurements were made using thermometers meeting the requirements specified in ASTM D2162 and
ASTM D1480, which have a current calibration traceable to recognised
National Standards, the National Physical Laboratory (NPL), National
Institute Standards and Technology (NIST), and other recognised national standards laboratories. Calibrations of this product are traceable to NIST.
Certified according to ISO 17025 / ISO 17034 under UKAS accreditation.
The certificate supplied with the product includes calculated viscosity at
0,5 °C intervals between 20 and 25 °C, as well as a calibration graph.
The viscosity value given in the ordering table below is nominal
- actual batch values are given in the certification documents supplied with the product and also on the label.
Description
Viscosity standard, flow cup
Viscosity standard, flow cup
Viscosity standard, flow cup
Viscosity standard, flow cup
Viscosity standard, flow cup
Viscosity standard, flow cup
Viscosity standard, flow cup
Viscosity standard, flow cup
Viscosity standard, flow cup
Viscosity standard, flow cup
Viscosity standard, flow cup
Viscosity standard, flow cup
Viscosity standard, flow cup
Viscosity standard, flow cup
Viscosity standard, flow cup
Viscosity standard, flow cup
Viscosity standard, flow cup
Viscosity standard, flow cup
Viscosity standard, flow cup
Viscosity standard, flow cup
Viscosity standard, flow cup
Viscosity standard, flow cup
No.
PSU0100
PSU0200
PSU0400
PSU0600
PSU0800
PSU1000
PSU1200
PSU1400
PSU1600
PSU1800
PSU2000
PSU2200
PSU2400
PSU2600
PSU2800
PSU3000
PSU3100
PSU3200
PSU3400
PSU3600
PSU3800
PSU4000
Viscosity at 20 °C Pk
26,37 mPa.s
500 ml
74,13 mPa.s
500 ml
100,0 mPa.s
500 ml
135,1 mPa.s
500 ml
209,9 mPa.s
500 ml
285,6 mPa.s
500 ml
354,4 mPa.s
500 ml
427,6 mPa.s
500 ml
501,7 mPa.s
500 ml
653,2 mPa.s
500 ml
732,2 mPa.s
500 ml
1083 mPa.s
500 ml
1503 mPa.s
500 ml
2294 mPa.s
500 ml
4069 mPa.s
500 ml
6166 mPa.s
500 ml
9065 mPa.s
500 ml
9274 mPa.s
500 ml
12325 mPa.s
500 ml
15368 mPa.s
500 ml
23912 mPa.s
500 ml
33326 mPa.s
500 ml
Cat. No.
99567.260
99568.260
99569.260
99570.260
99571.260
99572.260
99573.260
99574.260
99575.260
99576.260
99577.260
99578.260
99579.260
99580.260
99581.260
99582.260
99583.260
99584.260
99585.260
99586.260
99587.260
99588.260
vwr.com | VWR ® for calibration 23
PHYSICAL MEASUREMENT STANDARDS/PETROCHEMISTRY APPLICATIONS
PURE WATER VISCOSITY STANDARD
Pure Water Viscosity Standard has certified data for kinematic viscosity, dynamic viscosity and density at 5, 20, 25 and 37 °C.
‒ Certified in strict accordance with ASTM D2162 for 20, 25 and 37 °C
‒ Density g/ml in accordance with ASTM D1480 for all temperatures
‒ For use with glass capillary viscometers, automatic viscometers and other viscosity measuring equipment
‒ Kinematic (cSt) and dynamic viscosity (mPa·s) given at all temperatures
‒
‒ Ensures full compliance to ASTM and IP test method protocols
‒
Fully traceable to National Standards
Tamper-evident security packaging
Pure Water Viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely.
These standards are certified in strict accordance with ASTM D2162, the primary method for viscosity standards manufacture, for temperatures at 20, 25 and 37 °C.
These products have been tested at Primary level using master viscometers in accordance with ASTM D2162 to ensure the lowest uncertainty of measurement, thus providing standards that are certified with primary level accuracy.
Certified according to ISO 17025 / ISO 17034 under UKAS accreditation.
The viscosity value given in the ordering table below is the nominal viscosity value - actual batch values are given in the certification documents supplied with the product and also on the label.
Standard with certified values at 5 °C, 20 °C, 25 °C & 37 °C
No.
VISC-WAT
Viscosity at 25 °C
1,0018 mPa.s
Test method
ASTM D2162
Pack type
Glass bottle
Pk
100 ml
COLD FILTER PLUGGING POINT (CFPP) STANDARDS,
CERTIFIED REFERENCE MATERIALS
Cold Filter Plugging Point (CFPP) Certified Reference Materials are for the verification of laboratory instruments used in testing petroleum and derivative products for Cold
Filter Plugging Point (CFPP) according to IP 309, EN 116 and ASTM D6371 also other equivalent test methodology.
‒ Tested in accordance with ASTM / EN or IP test method protocols
‒ Low level of uncertainty achieves maximum accuracy of data
‒ Supplied in tamper-evident UN compliant security pack with 12 month shelf life
Fully certified in accordance with ISO 17034 under accreditation by UKAS.
Description
CFPP standard (CRM)
CFPP standard (CRM)
Temp. (°C)
–21,7
–12,4
CLOUD POINT STANDARD, CERTIFIED REFERENCE MATERIAL (CRM)
Cloud Point Certified Reference Materials are for the verification of laboratory instruments used in testing petroleum and derivative products for Cloud Point according to IP 219, ISO 3015, EN 23015, ASTM D2500 and other equivalent test methodology.
‒ Tested in accordance with ASTM / EN or IP test method protocols
‒ Low level of uncertainty achieves maximum accuracy of data
‒ Supplied in tamper-evident UN compliant security pack with 12 month shelf life
‒ Fully traceable to International Standards
IP 219, ISO 3015, EN 23015, ASTM D2500
Fully certified in accordance with UKAS and ISO/IEC 17034.
Description
Cloud point standard
Temp. (°C)
–7,6 °C (nominal value)
24 VWR ® for calibration | vwr.com
Pk
250 ml
250 ml
Pk
250 ml
New Standards for
Petrochemistry brochure
Cat. No.
99566.180
Cat. No.
99102.230
99103.230
Cat. No.
99104.230
PETROCHEMISTRY APPLICATIONS
(DIESEL, GASOLINE, LUBRICANT, JET AVIATION FUEL)
DISTILLATION STANDARDS FOR THE PETROLEUM
INDUSTRY, CERTIFIED REFERENCE MATERIALS
Distillation Certified Reference Materials are for the verification of laboratory instruments used in testing petroleum and derivative products for distillation at atmospheric pressure according to ASTM D86, IP 123, ISO 3405 and other such equivalent international methodology.
‒ Certified in accordance with ASTM / EN or IP test method protocols
‒ Certified by Round Robin Method using independant test laboratories ensuring good inter-laboratory correlation
‒ Low level of uncertainty achieves maximum accuracy of data
‒ Fully traceable to International Standards
‒ Supplied in tamper-evident bottles with 12 months shelf life
Fully certified in accordance with ISO 17034 under accreditation by UKAS
Description
Distillation standard, diesel
Distillation standard, gasoline
Distillation standard, jet aviation fuel
Temp. (°C)
Nominal 152,9… 358,1
Nominal 26,4… 174,9
Nominal 148,1…260,3
Pk
250 ml
250 ml
250 ml
FUEL TESTING STANDARDS - JET AVIATION FUEL
Fuel Testing Certified Reference Materials are for the verification of laboratory instruments used in testing petroleum and derivative products. This includes, but is not limited to, the analysis and measurement of: Acidity content, sulphur content, aniline point, Fluorescent Indicator Adsorption (FIA) aromatics, freezing point.
‒ Highest level of accreditation guarantee, providing the most credible data currently available worldwide
‒ Low levels of uncertainty achieves maximum accuracy of data
‒ All data generated exclusively by ISO 17025 accredited independent laboratories
‒ Ensures good inter-laboratory correlation
‒
‒ Fully traceable to International Standards
‒
Certified in accordance with ASTM / EN or IP test method protocols
Tamper-evident security packaging
Fully certified in accordance with ISO 17034 under accreditation by UKAS.
Description
Acidity standard
Aniline point
FIA aromatics
Sulphur standard
Freezing point
Concentration
0,0083 mg KOH/g
—
17,7% (vol)
7,4 mg/kg
—
Test method
ASTM D3242
ASTM D611
ASTM D1319
ASTM D3227 / IP 342 / ISO 3012
ASTM D2386, IP 16, ISO 3013
Temp. (°C)
58,48
–55,5
Pk
250 ml
250 ml
250 ml
250 ml
250 ml
Cat. No.
99106.230
99107.230
99108.230
Cat. No.
99122.230
99123.230
99124.230
99126.230
99127.230
SMOKE POINT STANDARD
Fuels Testing Certified Reference Material for the calibration and verification of laboratory instruments used in testing petroleum and derivative products for Smoke
Point ASTM D1322 / IP 57.
‒ Certified in accordance with ASTM / EN or IP test method protocols
‒ Fully traceable to International Standards
‒ Tamper-evident security packaging
Fully certified in accordance with ISO 17034 under accreditation by UKAS.
Description
Smoke Point standard jet aviation fuel, 24.47 mm
Test method
ASTM D1322 / IP 57
Pk
250 ml
Cat. No.
99125.230
vwr.com | VWR ® for calibration 25
PETROCHEMISTRY APPLICATIONS
(DIESEL, GASOLINE, LUBRICANT, JET AVIATION FUEL)
New standards for Petrochemistry brochure
CETANE NUMBER STANDARD, ASTM D 613
Fuels Testing Certified Reference Material for the calibration and verification of laboratory instruments used in testing petroleum and derivative products for Cetane
Number ASTM D613
‒ Certified in accordance with ASTM / EN or IP test method protocols
‒ Certified by Round Robin method using independent test laboratories.
‒ Ensures good inter-laboratory correlation
‒ Tamper-evident security pack
Description
Cetane Number standard, nominal value 52,6
Test method Pk
ASTM D613 1 L
FUEL TESTING STANDARDS - GASOLINE
Fuel Testing Certified Reference Material for the calibration and verification of laboratory instruments used in testing petroleum and derivative products for Octane Number.
‒ Certified in accordance with ASTM / EN or IP test method protocols
‒ Certified by Round Robin method using independent test laboratories.
‒ Ensures good inter-laboratory correlation
‒ Supplied in tamper-evident, UN compliant security pack
Cat. No.
99128.290
Description Test method Pk
Motor octane number standard, nominal value 86,9 ASTM D2700 1 L
Research octane number standard, nominal value 98 ASTM D2699 1 L
Cat. No.
99129.290
99130.290
POUR POINT STANDARDS
Pour Point Certified Reference Materials for the verification of laboratory instruments used in testing petroleum and derivative products for Pour Point to ASTM D97, IP 15,
ISO 3016 and other equivalent international test methodology.
‒ Highest level of accreditation guarantee, providing the most credible data currently available worldwide
‒ Low levels of uncertainty achieves maximum accuracy of data
‒
‒ Fully traceable to International Standards
‒
Certified in accordance with ASTM / EN or IP test method protocols
Tamper-evident security packaging
Fully certified in accordance with ISO 17034 under accreditation by UKAS. All data generated exclusively by ISO 17025 accredited independent laboratories.
The temperature value given in the ordering table below is the nominal temperature for the pour point value - actual batch values are given in the certification documents supplied with the product and also on the label.
Description
Pour Point standard, diesel
Pour Point standard, lubricant
Pour Point standard, lubricant
Pour Point standard, lubricant
Test method
ASTM D97, IP 15, ISO 3016
ASTM D97, IP 15, ISO 3016
ASTM D97, IP 15, ISO 3016
ASTM D97, IP 15, ISO 3016
Temp. (°C)
–30
–14,7
–30,3
–38
26 VWR ® for calibration | vwr.com
Pk
250 ml
250 ml
250 ml
250 ml
Cat. No.
99118.230
99119.230
99120.230
99121.230
PETROCHEMISTRY APPLICATIONS
(DIESEL, GASOLINE, LUBRICANT, JET AVIATION FUEL)
Description
MPCRM diesel, dynamic viscosity 2,187 mPa.s
MPCRM lubricant, kinematic viscosity (at 40 °C) 76,78 mPa.s
DIESEL AND LUBRICANT, MULTI-PARAMETER CERTIFIED
REFERENCE MATERIALS (MPCRMS)
MPCRM’s provide both calibration and verification options for laboratory test equipment, all from the same sample, with their values certified to the highest level of accreditation integrity available globally.
‒ Highest level of accreditation guarantee, providing the most credible certified data currently available worldwide
‒ Low levels of uncertainty achieves maximum accuracy of data
‒
‒ Fully traceable to International Standards
‒
Multiple test parameters provide a flexible and cost effective solution
Glass packaging with tamper-evident cap
Diesel: Certified for Viscosity, Density, Flash Point, Cloud Point, CFPP & Distillation using ASTM / IP and EN test method protocols
Lubricant: Certified for Viscosity, Density, Flash Point & Pour Point using ASTM / IP and EN test method protocols
Fully dual-certified in accordance with ISO 17025 and ISO 17034 under accreditation by UKAS
The ordering table below provides a small sample of the data availble with the documentation.
Flash point
PMCC 66 °C
PMCC 182,6 °C
Temp. (°C)
Cloud point: –7,4
Pour point:–30,3
Pk
500 ml
500 ml
Cat. No.
99100.260
99101.260
Solutions for precision
VWR ® LABMAX ™ BOTTLE-TOP DISPENSERS
‒ Unique closed-circuit air purging system
‒ Reagent guard valve prevents leakage
‒ Exclusive 360° swivel turn
‒ Quick, accurate volume adjustment
‒ Unique piston design
For more options, visit vwr.com
PB19035-NA
vwr.com | VWR ® for calibration 27
PETROCHEMISTRY APPLICATIONS
(DIESEL, GASOLINE, LUBRICANT, JET AVIATION FUEL)
Polysulphide, in light mineral oil.
POLYSULPHIDE, CERTIFIED REFERENCE MATERIALS, IN LIGHT MINERAL OIL
Polysulphide CRMs are suitable for calibration, verification, or for use in quality control procedures used for analysing sulphur content in petroleum products.
– Certified in strict accordance to ISO 17025 and ISO 17034 under UKAS accreditation
– Highest level of accreditation guaranteed, providing the most credible certified data available worldwide
– Suitable for, but not limited to, internationally recognised test methods and protocols: ASTM D2622, ASTM D3120, ASTM D4294,
ASTM D5453, ASTM D7039, IP 336, IP 496 and IP 497
– Fully traceable to International Standards, and low levels of uncertainty that achieve maximum data accuracy
– Supplied in 100 ml, tamper-evident glass packaging, providing assurance of sample integrity
Quantitative analysis of sulphur in crude oil, petroleum products and feedstock is extremely important to ensure compliance with regulatory bodies and legislation, failure to do so can result in costly fines. Analysis techniques for sulphur content measurement include wet chemistry, X-ray fluorescence, atomic spectroscopy and various thermal combustion methods with different detection limits. Regardless of the technique employed for measurement, robust analytical data is paramount for calibration and/or verification.
UKAS ISO 17025 and ISO 17034.
Description
Polysulphide in light mineral oil
Polysulphide in light mineral oil
Polysulphide in light mineral oil
Polysulphide in light mineral oil
Polysulphide in light mineral oil
Polysulphide in light mineral oil
Polysulphide in light mineral oil
Polysulphide in light mineral oil
Polysulphide in light mineral oil
Polysulphide in light mineral oil
Polysulphide in light mineral oil
Polysulphide in light mineral oil
Polysulphide in light mineral oil
Polysulphide in light mineral oil
Polysulphide in light mineral oil
Polysulphide in light mineral oil
Polysulphide in light mineral oil
Polysulphide in light mineral oil
Polysulphide in light mineral oil
28 VWR ® for calibration | vwr.com
Concentration ()
0,0005% (5 ppm)
0,0010% (10 ppm)
0,0025% (25 ppm)
0,0050% (50 ppm)
0,0100% (100 ppm)
0,0250% (250 ppm)
0,0300% (300 ppm)
0,0500% (500 ppm)
0,0700% (700 ppm)
0,0750% (750 ppm)
0,1000% (1000 ppm)
0,2500% (2500 ppm)
0,3000% (3000 ppm)
0,5000% (5000 ppm)
1,0000% (10000 ppm)
1,5000% (15000 ppm)
2,0000% (20000 ppm)
3,0000% (30000 ppm)
0% (0 ppm) / blank
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
Pk
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
99598.180
99599.180
99600.180
99601.180
99602.180
99603.180
99604.180
99605.180
99606.180
99609.180
Cat. No.
99589.180
99590.180
99591.180
99592.180
99593.180
99594.180
99595.180
99596.180
99597.180
ELECTROCHEMISTRY
Description
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standard CRM
Conductivity standards, Certified Reference Materials.
CONDUCTIVITY STANDARDS, CERTIFIED REFERENCE MATERIALS (CRMs)
FOR PRIMARY CALIBRATION OF CONDUCTIVITY METERS
Avantor offers a comprehensive range of conductivity standards as Certified
Reference Materials with primary use calibration of conductivity meters.
– Accredited acc. ISO 17025 / ISO 7034
– Traceable to NIST
– Certificate of Analysis including temperature correction chart
Intended uses:
– Calibration, qualification and monitoring of instruments for conductivity measurement
– Validation of analytical methods
– Preparation of working reference samples
– Detection limit and linearity studies
These standards are produced by dissolving potassium chloride (KCl) in 18 MOhm of deionised water, except where indicated, then filtered through a 0,22 μm filter in equilibrium with atmospheric carbon dioxide. The certified value and expanded uncertainty are obtained using conductivity meter calibration according to ISO/IEC
17025. Homogeneity and stability studies are performed according to the requirement of ISO 17034 and ISO Guide 35. All conductivity standards are traceable to SI (NIST).
3000
10000
12880
15000
20000
30000
50000
100000
111.3
147
200
500
718
1000
1413
1500
2000
25
50
84
100
Conductivity
0 - 2 μS/cm (nominal)
5
10
15
20
Pack type
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
Pk
250 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
Cat. No.
89001.230
89002.270
89003.270
89005.270
89006.270
89007.270
89008.270
89009.270
89010.270
89011.270
89012.270
89013.270
89014.270
89015.270
89018.270
89019.270
89020.270
89021.270
89023.270
89025.270
89026.270
89027.270
89028.270
89029.270
89030.270
89031.270
vwr.com | VWR ® for calibration 29
ELECTROCHEMISTRY
CONDUCTIVITY STANDARD SOLUTIONS
A complete range of certified control standards with values ranging from 10 to 100
000 µS to meet all the requirements for electrochemical analysis.
‒ Accurate to ±1%
‒ Traceable to NIST, meeting Ph. Eur. and USP requirements
‒ Tested using INAB accredited test methods to ISO 17025
Standard values (25 °C)
Used for determining cell constant - see recommendations of instrument manufacturer for the relevant cell design.
Premium values (25 °C)
These standards are for verifying that the measuring system (instrument, probe and operator) can accurately detect sample values in the area of interest (e.g. 10 μS/cm for pharmaceutical water, or 500 000 μS/cm for environmental samples).
Description
200
500
1000
10000
111800
20000
50000
100000
150000
200000
500000
Standard values (25 °C) - (μS/cm)
84
84
147
1413
1413
1413
12880
5
10
15
20
50
100
12880
12880
Premium values (25 °C) - (μS/cm)
1.3
Pk (ml)
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
100
500
500
100
500
1000
100
500
1000
Cat. No.
84131.180
84131.260
84132.260
84135.180
84135.260
84135.290
84136.180
84136.260
84136.290
84134.260
84133.260
84137.260
84107.260
84140.260
84143.260
84139.260
84145.260
84138.260
84141.260
84146.260
84108.260
84149.260
84142.260
84144.260
85917.260
85918.260
85919.260
30 VWR ® for calibration | vwr.com
ELECTROCHEMISTRY pH value
1,68
4,01
6,87
7,41
9,18
10,01 pH buffer type
Oxalate
Phthalate
Phosphate
Phosphate
Borate
Carbonate
BUFFER SOLUTIONS, 25 °C AVS TITRINORM
‒ Solutions prepared from AnalaR ® NORMAPUR ® grade analytical reagents
‒ True analytical value on the label to an accuracy of ±0,02 pH units
‒ Traceable to SRM from NIST
‒ Batch number and packing date for traceability
‒ Buffers @ 25 °C conform to Reag. Ph. Eur.
Certificate of Analysis available from vwr.com
All the products below are produced and certified in accordance with
ISO 17034 accreditation
Colour
Colourless
Colourless
Colourless
Colourless
Colourless
Colourless
Pack type
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Pk
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
Cat. No.
85506.260
85511.260
85515.260
85516.260
85517.260
85518.260
pH value
1,679
3,776
4,005
6,865
7,413
9,18
10,012
12,45
12,454 pH accuracy
±0,010
±0,010
±0,010
±0,010
±0,010
±0,010
±0,010
±0,05
±0,050
BUFFER SOLUTIONS, SECONDARY STANDARDS
‒ Solution standardised at 25 °C
‒ Accurate to ±0,010 pH units (except buffer 12,454 with accuracy ±0,050)
‒ Fully traceable for optimum pH calibration (traceable to NIST), DIN 19266 and IUPAC
‒ Supplied with detailed Certificate of Analysis
‒ Temperature dependence data is printed on the labels as are batch number and expiry date
Pk
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
Cat. No.
84.580.260
84.581.260
84.582.260
84.583.260
84.584.260
84.585.260
84.586.260
84.593.260
84.587.260
Discover all the newest additions to our chemical range on vwr.com/chemicals!
Discover all our major brands such as
VWR Chemicals, Merck, Avantor,
Acros Organics, Alfa Aesar and
Honeywell.
You will find all the chemical promotions, new products, literature, MSDS, CoA, etc in one place on vwr.com/chemicals
Go to vwr.com/chemicals
PB18010-EN
vwr.com | VWR ® for calibration 31
ELECTROCHEMISTRY pH BUFFER SOLUTIONS IN SACHETS, 20 °C, AVS TITRINORM
FOR PH METER CALIBRATION
‒ Practical colour coded 30 ml sachets - one use per sachet - no risk of contamination
‒ Ideal for on-site analyses
‒ Accuracy: pH is ±0,02 at 20 °C
‒ Traceable to SRM from NIST pH value
4,00
7,00
9,00
10,00 pH accuracy
±0,02
±0,02
±0,02
±0,02 pH buffer type
Phthalate
Phosphate
Borate
Borate
Colour
Colourless
Colourless
Colourless
Colourless
Pack type
Sachet
Sachet
Sachet
Sachet
Pk Info
30×30 ml
30×30 ml
30×30 ml
30×30 ml
Pk
1 KIT
1 KIT
1 KIT
1 KIT pH value
Assorted buffer kits
4,00 /7,00/ 9,00
4,00/ 7,00/ 10,00
Colour
Colourless
Colourless
Packed
10×30 ml sachets of pH 4,01; 10×30 ml sachets of pH 7,00; 10×30 ml sachets of pH 9,00
10×30 ml sachets of pH 4,01; 10×30 ml sachets of pH 7,00; 10×30 ml sachets of pH 10,00
Pk
1 KIT
1 KIT
Cat. No.
85041.001
85042.001
85043.001
85044.001
Cat. No.
85045.001
85046.001
BUFFER TABLETS, GURR ® FOR HAEMATOLOGY
‒ These tablets provide a rapid and convenient method of preparing a buffer solution
‒ Gurr ® buffer tablets also for the preparation of microscopical stain solutions
‒ One tablet dissolved in distilled water, and made up to 100 ml, produces a solution of the stated pH at 20 °C
‒ The molarity of the buffer solutions is 0,005 M
Description
Buffer tablets
Buffer tablets
Buffer tablets
Buffer tablets
Buffer tablets pH
4,0 ±0,02
7,0 ±0,02
9,2 ±0,02
6.8+/-0.02
7.2 +/-0.02
Pk
50 Tab.
50 Tab.
50 Tab.
50 Tab.
50 Tab.
Cat. No.
331542Q
331552S
331562U
331932D
331942F pH BUFFER CAPSULES
‒ Colour coded for easy identification
‒ Preservative-free
‒ Extended shelf life
‒ Add one capsule to 100 ml of distilled water pH value
4,01
7,00
10,00 pH accuracy
±0,02
±0,02
±0,02
Colour
Orange
Green
Blue
Final volume (ml)
100
100
100
Packed
5 plastic tubes, 10 capsules/tube
5 plastic tubes, 10 capsules/tube
5 plastic tubes, 10 capsules/tube
Pk
50
50
50
Cat. No.
332732B
332742D
332762H
32 VWR ® for calibration | vwr.com
ELECTROCHEMISTRY
BUFFER SOLUTIONS, 20 °C AVS TITRINORM
‒ Solutions prepared from AnalaR ® NORMAPUR ® grade analytical reagents
‒ True analytical value on the label to an accuracy of ±0,02 pH units (pH 1 to 11)
‒ (±0,05 for pH 12,00 buffer)
‒ Traceable to SRM from NIST
‒
‒ Certificate of Analysis available from vwr.com
‒
Batch number and packing date for traceability
Available in colourless and coloured solutions
All the products below are produced and certified in accordance with ISO 17034 accreditation
If significantly large volumes are required please contact your local Avantor sales office for a customised offer.
* For total hardness in water pH accuracy
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,05
±0,02
±0,02
±0,02
±0,02
±0,05
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02
±0,02 pH value
4,00
4,00
4,00
4,00
4,00
4,66
4,66
5,00
6,00
Buffer solutions in bottles
1,00
2,00
2,00
3,00
3,00
4,00
4,00
7,00
7,00
8,00
9,00
9,00
9,00
9,00
9,00
9,00
9,22
6,88
6,88
7,00
7,00
7,00
7,00
7,00
7,00
7,00
7,00
9,22
10,00
10,00
10,00
10,00
10,00
10,00
10,00
10,00
11,00
12,00
Buffer solution sets
10,00 /7,00 /4,00
10,00 /7,00 /4,00
Accreditation
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
-
-
ISO 17034
-
ISO 17034
ISO 17034
ISO 17034
-
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034
ISO 17034 pH buffer type
Phosphate
Phosphate
Phosphate
Phosphate
Phosphate
Phosphate
Phosphate
Phosphate
Phosphate
Phosphate
Phosphate
Phosphate
Borate
Borate
Borate
Borate
Borate
Borate
Borate
Borate
Borate
Carbonate
Carbonate
Carbonate
Carbonate
Ammonia
Borate
Borate
Borate
Phosphate
Phosphate
Glycine
Citrate
Citrate
Citrate
Citrate
Phthalate
Phthalate
Phthalate
Phthalate
Phthalate
Phthalate
Phthalate
Acetate
Acetate
Citrate
Citrate
Colour
Colourless
Colourless
Colourless
Colourless
Colourless
Colourless
Colourless
Colourless
Green
Green
Green
Green
Colourless
Colourless
Colourless
Colourless
Blue
Blue
Blue
Colourless
Colourless
Colourless
Colourless
Colourless
Colourless
Colourless
Yellow
Yellow
Yellow
Colourless
Colourless
Colourless
Colourless
Colourless
Colourless
Colourless
Colourless
Colourless
Colourless
Colourless
Colourless
Red
Red
Colourless
Colourless
Colourless
Colourless
Blue/green/red
Blue/green/red
Pack type
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Bag-in-box (Cubitainer)
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Bag-in-box (Cubitainer)
Plastic bottle
Dosing bottle (plastic)
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Bag-in-box (Cubitainer)
Bag-in-box (cubitainer)
Plastic bottle
Dosing bottle (plastic)
Plastic bottle
Bag-in-box (cubitainer)
Plastic bottle
Plastic bottle
Plastic bottle
Bag-in-box (Cubitainer)
Plastic bottle
Plastic bottle
Bag-in-box (cubitainer)
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle
Bag-in-box (Cubitainer)
Plastic bottle
Plastic bottle
Dosing bottle (plastic)
Plastic bottle
Plastic bottle
Plastic bottle
Plastic bottle (3×100 ml)
Plastic bottle (3×250 ml)
Cat. No.
32031.297
32032.260
32032.291
32033.294
32033.374
32095.184
32095.264
32095.297
32095.366
32095.377
32044.268
32044.290
98192.260
98192.290
32035.291
32036.294
83601.260
83601.290
32096.187
32096.267
32096.291
32096.360
32096.371
32096.400
32045.262
32045.290
32045.295
32045.375
32038.291
32039.261
32039.294
32039.374
32046.265
32046.298
32046.378
32097.261
32097.290
32040.185
32040.260
32040.298
32040.378
98213.260
85680.260
85680.290
85680.295
32041.292
32042.295
83610.600
83610.610
vwr.com | VWR ® for calibration 33
Pk
1
1
1 L
5 L
1 L
500 ml
1 L
5 L
500 ml
1 L
5 L
500 ml
500 ml
1 L
100 ml
500 ml
1 L
5 L
5 L
10 L
500 ml
1 L
1 L
100 ml
500 ml
1 L
5 L
500 ml
500 ml
1 L
1 L
1 L
1 L
1 L
500 ml
1 L
1 L
5 L
100 ml
500 ml
1 L
5 L
5 L
500 ml
1 L
500 ml
1 L
1 L
1 L
TITRATION
CERTIFIED REFERENCE MATERIALS (CRMs) FOR
STANDARDISATION OF VOLUMETRIC SOLUTIONS
CRM’s - secondary reference materials intended for standardisation of volumetric solutions in accordance to the Pharmacopoeia (Ph. Eur. and USP). These volumetric standards are prepared from high purity salts. The certified mass fraction was determined by classical analysis according to ISO/IEC 17025. Homogeneity and stability studies have been performed according to the requirement of ISO 17034 and ISO Guide 35. All volumetric standards are traceable to SI (NIST or BAM).
– High purity prevents possible titration interference
– Accurately determined content decreases mistakes linked to the method
– Complete Certificate of Analysis supplied with each standard offers quality assurance
– Traceable to NIST or BAM standards
Certifications: ISO 17025 / 17034
Certified reference material for standardisation of volumetric solutions.
CAS No.
Description
65-85-0
Benzoic acid
471-34-1
Calcium carbonate
Formula
Description
Benzoic acid
Calcium carbonate di-Sodium oxalate
C₇H₆O₂
Iron(II )ethylenediammonium sulfate
Potassium dichromate
Potasium hydrogen phthalate
Potassium iodate
Sodium carbonate anhydrous
Sodium chloride
CaCO₃
Tris-(hydroxymethyl)-aminomethane (TRIS)
Zinc
62-76-0 di-Sodium oxalate
C₂Na₂O₄
34962-29-3
Iron(II )ethylenediammonium sulfate
FeSO₄ ·
NH₃CH₂CH₂N-
H₃SO₄
7778-50-9
Potassium dichromate
K₂Cr₂O₇
Standards
CRM
CRM
CRM
CRM
CRM
CRM
CRM
CRM
CRM
CRM
CRM
877-24-7
Potasium hydrogen phthalate
KC₈H₅O₄
7758-05-6
Potassium iodate
KIO₃
497-19-8
Sodium carbonate anhydrous
Na₂CO₃
7647-14-5
Sodium chloride
NaCl
77-86-1
Tris-(hydroxymethyl)-aminomethane
(TRIS)
C₄H₁₁NO₃
7440-66-6
Zinc
Zn
Pk
60 g
50 g
60 g
80 g
80 g
80 g
100 g
80 g
80 g
80 g
100 g
Cat. No.
88395.060
88396.050
88397.060
88398.080
88399.080
88400.080
88401.100
88402.080
88403.080
88404.080
88405.100
DISCOVER
MORE
VWR Chemicals volumetric solutions for titration
All you need for titration.
‒ AVS TITRINORM: ‘Ready to use’ volumetric solutions, traceable to NIST available in different packs
‒ ConvoL NORMADOSE: Concentrated volumetric solutions
‒ Secondary reference standards for reliable calibration in volumetric analysis
34 VWR ® for calibration | vwr.com
PB20068-EN
TITRATION
Description
KF water standards
Coulometric standard 0,01% water (xylenes based)
Coulometric standard 0,01% water (propylene carbonate based)
Coulometric standard 0,1% water
Coulometric standard 0,1% water
Coulometric standard 1% water
Concentration ()
100 μg/g
100 μg/g
1000 μg/g
1000 μg/g
10000 μg/g
Coulometric standard 1% water 10000 μg/g
KF water standards in liquid petroleum conforming to ASTM D1744, E1064, D4377
CRM water standard
CRM water standard
60 μg/g
100 μg/g
CRM water standard
CRM water standard
CRM water standard
CRM water standard
100 μg/g
100 μg/g
1000 μg/g
1000 μg/g
CRM water standard
CRM water standard
CRM water standard
CRM waterAb standard
KF water standards
Volumetric standard 0,5% water
Volumetric standard 0,5% water
Volumetric standard 0,5% water
Volumetric standard 1,0% water
Karl Fischer Solid standard for oven method
Lactose solid standard
Karl Fischer potassium citrate standard for oven method
1000 μg/g
5000 μg/g
5000 μg/g
5000 μg/g
5000 μg/ml
5000 μg/ml
5000 μg/ml
10000 μg/ml
1%
4,98 ±0,03% H₂O
5,55%
Karl Fischer volumetric fixed water standard - sodium tartrate dihydrate 15,.66 +/- 0,05% H₂O
Karl Fischer volumetric fixed water standard - sodium tartrate dihydrate 15,.66 +/- 0,05% H₂O
Karl Fischer standard di-sodium tartrate dihydrate
Karl Fischer liquid standard mineral oil based
15,61 - 15,71% H₂O
<30 ppm
STANDARDS FOR WATER DETERMINATION BY THE KARL FISCHER METHOD
The tightening of regulatory requirements and the increasing demands of QA/
QC methodology is becoming more important across all market sectors.
The demand for standards, to support the testing methods, continues to increase and this growth applies to water determination according to Karl
Fischer. Avantor now offers a complete range of Karl Fischer water standards as CRMs, to calibrate and monitor equipment and check test results.
– CRMs acc. to ISO 17025 / ISO 17034
– CRM acc. to ASTM (in liquid petroleum)
– Broad product range for both volumetric + KF coulometric titrations and indirect oven method
– Liquid and solid water standards available
– Supplied with a detailed Certificate of Analysis
Our range of Karl Fischer water standards are Certified Reference Materials acc to
ISO 17025 and ISO 17034. The standards are available both in liquid and solid form.
We also offer a range of Karl Fischer water standards as CRM for determination in liquid petroleum according to ASTM. The water content in standards in liquid petroleum is determined using the ASTM D6304 method.
When the Cat. No. (Pk) ends with a
– .005 then it is 10×5 ml
– .002 then it is 10×2 ml
– .020 then it is 5×20 ml
Pack type
Pack of 10x4 g ampoules
Pack of 10x4 g ampoules
Pack of 10×4 g ampoules
Pack of 10×8 g ampoules
Pack of 10×4 g ampoules
Pack of 10×8 g ampoules
Pack of 10×5 ml vials
Pack of 10×2 ml vials
Pack of 10×5 ml vials
Pack of 5×20 ml vials
Pack of 10×2 ml vials
Pack of 10×5 ml vials
Pack of 5×20 ml vials
Pack of 10×2 ml vials
Pack of 10×5 ml vials
Pack of 5×20 ml vials
Bottle
Bottle
Bottle
Bottle
Bottle
Bottle
Glass bottle
Glass bottle
Glass bottle
Pack of 10x8 g ampoules
Pk
10 Ampoul
10 Ampoul
10 Ampoul
10 Ampoul
10 Ampoul
10 Ampoul
250 ml
500 ml
1 L
500 ml
5 g
10 g
10 g
1 g
10 g
100 g
10 Ampoul
1 KIT
1 KIT
1 KIT
1 KIT
1 KIT
1 KIT
1 KIT
1 KIT
1 KIT
1 KIT
Cat. No.
88434.004
88435.004
88427.004
88427.008
85487.004
85487.008
85482.005
85483.002
85483.005
85483.020
85484.002
85484.005
85484.020
85485.002
85485.005
85485.020
85488.230
85488.260
85488.290
85489.260
88433.005
85449.100
88432.100
88428.001
88428.100
85692.100
88429.008
vwr.com | VWR ® for calibration 35
TITRATION
TOTAL ACID NUMBER (TAN) STANDARDS
Total Acid Number (TAN) Standards are specifically manufactured for the verification of analytical instruments used to determine acid number by potentiometric titration. Each standard is certified in strict accordance with international test method protocols, ASTM D664 / IP 177.
‒ Typically used in, but not limited to, the analysis of used oils and lubricants
‒ Acid Number (AN) tested and certified in accordance with ASTM D664 / IP 177
‒ Fully traceable to International Standards and low levels of uncertainty achieves maximum accuracy of data
‒ Supplied in tamper-evident glass packaging, providing assurance of sample integrity
Manufacture and certification is carried out in strict accordance with dual-AKAS accreditations to ISO 17025 and ISO 17034. This dual-accreditation ensures the highest level of accreditation guarantee, and provides the most credible certified data available worldwide.
The concentration value given in the ordering table below is the nominal concentration for the TAN value - actual batch values are given in the certification documents supplied with the product and also on the label.
Description
TAN001
TAN001
TAN005
TAN005
TAN010
TAN010
TAN015
TAN015
TAN020
Concentration
0,10 mg KOH/g
0,10 mg KOH/g
0,49 mg KOH/g
0,49 mg KOH/g
0,99 mg KOH/g
0,99 mg KOH/g
1,54 mg KOH/g
1,54 mg KOH/g
2,02 mg KOH/g
Test method
ASTM D664/IP 177
ASTM D664/IP 177
ASTM D664/IP 177
ASTM D664/IP 177
ASTM D664/IP 177
ASTM D664/IP 177
ASTM D664/IP 177
ASTM D664/IP 177
ASTM D664/IP 177
Pk
125 g
1 SET
125 g
1 SET
125 g
1 SET
125 g
1 SET
50 g
Cat. No.
99343.202
99343.001
99344.202
99344.001
99345.202
99345.001
99346.202
99346.001
99347.154
Description
TAN020
TAN025
TAN025
Concentration
2,02 mg KOH/g
2,48 mg KOH/g
2,48 mg KOH/g
TAN030
TAN030
TAN050
TAN050
TAN100
2,93 mg KOH/g
2,93 mg KOH/g
4,57 mg KOH/g
4,57 mg KOH/g
10,14 mg KOH/g
TAN100 10,14 mg KOH/g
Add : 1 ST = 3x125 g
Test method
ASTM D664/IP 177
ASTM D664/IP 177
ASTM D664/IP 177
ASTM D664/IP 177
ASTM D664/IP 177
ASTM D664/IP 177
ASTM D664/IP 177
ASTM D664/IP 177
ASTM D664/IP 177
Pk
1 SET
50 g
1 SET
50 g
1 SET
50 g
1 SET
50 g
1 SET
Cat. No.
99347.001
99348.154
99348.001
99349.154
99349.001
99350.154
99350.001
99351.154
99351.001
VWR Chemicals Karl Fischer reagents for accurate water determination
Ready to use’ solutions, reagents and standards for volumetric and coulometric analyses.
‒ Fast, stable and accurate endpoints
‒ Buffered systems for controlled pH
‒ Long-term stability and shelf life
‒ Batch-to-batch reproducibility
36 VWR ® for calibration | vwr.com
DISCOVER
MORE
PB20069-EN
TITRATION
Description
TBN1
TBN1
TBN3
TBN3
TBN6
TBN6
TBN10
TBN10
TBN15
TBN15
TBN30
TBN30
TBN40
TBN40
TBN70
TBN70
Add : 1 SET = 3x125 g
Concentration
0,99 mg KOH/g
0,99 mg KOH/g
3,01 mg KOH/g
3,01 mg KOH/g
6,06 mg KOH/g
6,06 mg KOH/g
10,01 mg KOH/g
10,01 mg KOH/g
15,17 mg KOH/g
15,17 mg KOH/g
30,17 mg KOH/g
30,17 mg KOH/g
40,51 mg KOH/g
40,51 mg KOH/g
70,24 mg KOH/g
70,24 mg KOH/g
TOTAL BASE NUMBER (TBN) STANDARDS
Total Base Number (TBN) Standards are specifically manufactured for the verification of analytical instruments used to determine base number by potentiometric titration.
Each standard is certified in strict accordance with international test method protocols, ASTM D2896 / IP 276.
‒ Typically used in, but not limited to, the analysis of used oils and lubricants
‒ Base Number (BN) tested and certified in accordance with ASTM D2896 / IP 276
‒ Fully traceable to International Standards and low levels of uncertainty achieves maximum accuracy of data
‒ Supplied in tamper-evident glass packaging, providing assurance of sample integrity
Manufacture and certification is carried out in strict accordance with dual UKAS accreditations to ISO 17025 & ISO 17034. This dual accreditation ensures the highest level of accreditation guarantee and provides the most credible certified data available worldwide.
The concentration value given in the ordering table below is the nominal concentration for the TBN value - actual batch values are given in the certification documents supplied with the product and also on the label.
Test method
ASTM D2896/IP 276
ASTM D2896/IP 276
ASTM D2896/IP 276
ASTM D2896/IP 276
ASTM D2896/IP 276
ASTM D2896/IP 276
ASTM D2896/IP 276
ASTM D2896/IP 276
ASTM D2896/IP 276
ASTM D2896/IP 276
ASTM D2896/IP 276
ASTM D2896/IP 276
ASTM D2896/IP 276
ASTM D2896/IP 276
ASTM D2896/IP 276
ASTM D2896/IP 276
Pk
50 g
1 SET
50 g
1 SET
50 g
1 SET
50 g
1 SET
125 g
1 SET
50 g
1 SET
50 g
1 SET
50 g
1 SET
Cat. No.
99352.202
99352.001
99353.154
99353.001
99358.154
99358.001
99354.154
99354.001
99355.154
99355.001
99356.154
99356.001
99357.154
99357.001
99359.154
99359.001
DISCOVER
MORE
ACS/ Reag PH EUR substances, standards, solutions and reagents
‒ Quality
‒ Traceability
‒ Compliance with international standards
vwr.com | VWR ® for calibration 37
PB19036-NA
INORGANIC TRACE ANALYSIS
Matrix
2% HNO
3
2% HNO
3
2% HNO
3
2% HCl
2% HNO
3
2% HNO
3
5% HNO
3
2% HNO
3
10% HNO
3
2% HNO
3
2% HNO
3
10% HCl
2% HNO
3
2% HNO
3
2% HNO
3
2% HNO
3
2% HNO
3
Water
2% HNO
3
2% HCl
2% HNO
3
2% HCl
Water
2% HNO
3
2% HCl
10% HNO
3
2% HNO
3
2% HNO
3
2% HNO
3
2% HNO
3
2% HNO
3
2% HNO
3
2% HNO
3
Element
Li
Mg
Mn
Mo
In
Ir
K
La
Ga
Gd
Ge
Hf
Hg
Ho
Dy
Er
Eu
Fe
Cd
Ce
Co
Cr
Cs
Cu
Ba
Be
Bi
Ca
Ag
Al
As
Au
B
AVS TITRINORM ® AAS STANDARDS
This classic range of AAS standards (1000 mg/L) has been extended with 37 new elements.
‒ Complete range of 66 different standards
‒ Very competitive price
‒ Real value ±0,3%
‒ Delivered with a complete Certificate of Analysis in a single aluminium bag
‒
‒ Traceable to NIST
‒
Tested according to ISO EN 17025 and ISO EN 17034
Available in 100 and 500 ml
86673.180
86674.180
86675.180
86676.180
86677.180
86678.180
86679.180
86680.180
86681.180
86682.180
86683.180
86684.180
86685.180
86686.180
86687.180
86688.180
86690.180
86691.180
86692.180
Pk 100 ml
86659.180
86660.180
86661.180
86662.180
86663.180
86664.180
86665.180
86666.180
86667.180
86668.180
86669.180
86670.180
86671.180
86672.180
Cat. No.
Element
Yb
Zn
Zr
Tm
V
W
Y
Ti
Tl
Sn
Sr
Ta
Te
Sc
Se
Si
Sa
Rb
Rh
Rh
Ru
S
Sb
P
Pb
Pd
Pt
Na
Nb
Nd
Ni
Os
86676.260
86677.260
86678.260
86679.260
86680.260
86681.260
86682.260
86683.260
86684.260
86685.260
86686.260
86687.260
86688.260
86690.260
86691.260
86692.260
Pk 500 ml
86659.260
86660.260
86661.260
86662.260
86663.260
86664.260
86665.260
86666.260
86667.260
86668.260
86669.260
86670.260
86671.260
86672.260
86673.260
86674.260
86675.260
Matrix
2% HNO
3
2% HNO
3
Water
2% HNO
3
20% HCl
2% HNO
3
5% HNO
3
10% HNO
3
5% HNO
3
2% HNO
3
2% HNO
3
2% H2SO
4
1% HNO
3
2% HNO
3
2% HNO
3
-
5% HCl
2% HNO
3
5% HNO
3
2% HNO
3
2% HNO
3
5% HCl
Water
2% HNO
3
5% HCl
10% HCl
2% HNO
3
2% HNO
3
5% HCl
5% HCl
Water
5% HNO
3
86707.180
86708.180
86709.180
86710.180
86711.180
86712.180
86713.180
86714.180
86715.180
86717.180
86718.180
86719.180
86721.180
86722.180
86723.180
86724.180
86725.180
86726.180
Pk 100 ml
86693.180
86694.180
86695.180
86696.180
86697.180
86698.180
86699.180
86700.180
86701.180
86702.180
86703.180
86704.180
86705.180
86706.180
Cat. No.
86710.260
86711.260
86712.260
86713.260
86714.260
86715.260
86717.260
86718.260
86719.260
86721.260
86722.260
86723.260
86724.260
86725.260
86726.260
Pk 500 ml
86693.260
86694.260
86695.260
86696.260
–
86698.260
86699.260
86700.260
86701.260
86702.260
86703.260
86704.260
86705.260
86706.260
86707.260
86708.260
86709.260
38 VWR ® for calibration | vwr.com
ARISTAR ® ICP SINGLE ELEMENT STANDARDS
‒ Available as 1000 or 10 000 ppm in 2 packs of 100 and 500 ml
‒ Produced from high purity acids, water ASTM I 18 MΩ and 99,999% high purity salts
‒ Solution assayed by titration
‒ Final concentration verified against ICP standards from NIST
‒
‒ Delivered in an aluminium bag with a complete Certificate of Analysis
‒
Total maximum uncertainty: ±1%
Produced by accreditated supplier according to ISO EN 17025 and ISO 17034
INORGANIC TRACE ANALYSIS
ICP standard
Element
Aluminium
Antimony
Arsenic
Barium
Beryllium
Bismuth
Boron
Cadmium
Calcium
Cerium
Selenium
Silicon
Silver
Sodium
Strontium
Sulphur
Tantalum
Tellurium
Terbium
Thallium
Lead
Lithium
Lutetium
Magnesium
Manganese
Mercury
Molybdenum
Neodymium
Nickel
Niobium
Palladium
Phosphorus
Platinium
Potassium
Praseodymium
Rhenium
Rhodium
Rubidium
Ruthenium
Samarium
Scandium
Caesium
Chromium
Cobalt
Copper
Dysprosium
Erbium
Europium
Gadolinium
Gallium
Germanium
Gold
Hafnium
Holmium
Indium
Iridium
Iron
Lanthanum
Tin
Titanium
Vanadium
Ytterbium
Yttrium
Zinc
Zirconium
Tungsten
Cat. No.
Composition
P in H
2
O
Pt in HCl 10%
KNO
3
in HNO
3
2-5%
Pr
6
O
11
in HNO
3
2-5%
Re in H
2
O, HNO
3
traces
Rh in HCl 10%
RbNO
3
in HNO
3
2-5%
RuCl
3
.3H
2
0 in HCl 10%
Sm
2
O
3
in HNO
3
2-5%
Sc in HNO
3
2-5%
Se in HNO
3
2-5%
(NH
4
)2SiF
6
in H
2
0, HF traces
Ag in HNO
3
2-5%
NaNO
3
in HNO
3
2-5%
Sr in HNO
3
2-5%
(NH
4
)2SO
4
in H
2
O
Ta in H
2
O,HF traces
Te in HCl 20%
Tb
4
O
7
in HNO
3
2-5%
Tl in HNO
3
2-5%
Sn in HNO
3
2-5%, HF traces
Sn in HCl 20%
Ti in H
2
O, HF traces
V
2
O
5
in HNO
3
2-5%
Yb
2
O
3
in HNO
3
2-5%
Y in HNO
3
2-5%
Zn in HNO
3
2-5%
ZrO(NO
3
)2 in HNO
3
2-5%
W in H
2
O, NH
4
OH traces
(Al(NO
3
)3.9H
2
O in HNO₃ 2-5%
Sb in HNO
3
2-5%
As in HNO
3
2-5%
(Ba(NO
3
)2 in HNO
3
2-5%
BeO(C
2
H
3
O
2
)6 in HNO
3
2-5%
Bi in HNO
3
2-5%
H
3
BO
3
in H
2
O and NH
4
OH traces
Cd in HNO
3
2-5%
CaCO
3
in HNO
3
2-5%
(NH
4
)2Ce(NO
3
)6 in HNO
3
2-5%
CsNO
3
in HNO
3
2-5%
(NH
4
)2Cr
2
O
7
in HCl 5%
Co in HNO
3
2-5%
Cu in HNO
3
2-5%
Dy
2
O
3
in HNO
3
2-5%
Er
2
O
3
in HNO
3
2-5%
Eu
2
O
3
in HNO
3
2-5%
Gd
2
O
3
in HNO
3
2-5%
Ga in HNO
3
2-5%
(NH
4
)2GeF
6
in H
2
O, HF traces
Au in HCl 10%
HfO
2
in HNO
3
2-5%, HF traces
Ho
2
O
3
in HNO
3
2-5%
In in HNO
3
2-5%
IrCl3.3H
2
O in HCl 10%
Fe in HNO
3
2-5%
La
2
O
3
in HNO
3
2-5%
Pb(NO
3
)2 in HNO
3
2-5%
Li
2
CO
3
in HNO
3
2-5%
Lu
2
O
3
in HNO
3
2-5%
Mg in HNO
3
2-5%
Mn in HNO
3
2-5%
Hg in HNO
3
10%
(NH
4
)2MoO
4
in HNO
3
, HF traces
Nd
2
O
3
in HNO
3
2-5%
Ni in HNO
3
2-5%
Nb
2
O
5
in H
2
O, HF traces
Pd in HCl 10%
ICP 1000 ppm
455964U
455984B
456004Y
456024M
456044Q
-
456084B
456104L
456124P
456144T
455764X
455784S
455804F
455824J
455844N
455864R
455884V
455904Y
455924M
455944Q
456164A
456224S
456244W
456264D
456324V
456344C
456364G
456384K
456404U
457184Y
455544E
455564Y
455584M
455604W
455624D
455644H
455664L
455684P
455704C
455724G
455744K
455344V
455364C
455384G
455404Q
455424U
455444B
455464F
455484J
455504T
455524A
Pk 500 ml
455004E
455024Y
455044M
455064Q
455084U
455104H
455124L
455144P
455164T
455184A
455204K
455244S
455264W
455284D
455304N
455324R
Cat. No.
455962S
455982W
456002G
456022K
456042X
456062S
456082W
456102J
456122N
456142R
455762M
455782Q
455802D
455822H
455842L
455862P
455882T
455902G
455922K
455942X
456162V
456222Q
456242U
456262B
456322T
456342A
456362E
456382Y
456402S
457182G
455542C
455562G
455582K
455602U
455622B
455642F
455662J
455682N
455702A
455722E
455742Y
455342T
455362A
455382E
455402X
455422S
455442W
455462D
455482H
455502R
455522V
Pk 100 ml
455002C
455022G
455042K
455062X
455082S
455102F
455122J
455142N
455162R
455182V
455202Y
455242Q
455262U
455282B
455302L
455322P
-
-
456054S
-
456094D
456114N
-
456154V
456174C
-
456254B
-
456334A
456354E
456374Y
456394M
456414W
457174G
-
455834L
-
-
-
-
-
455954S
455974W
-
455614B
455634F
455654J
455674N
-
455714E
455734Y
-
-
455794U
Pk 500 ml
455014G
455034K
455054X
-
455094W
455114J
455134N
455154R
-
455434W
455454D
455474H
-
-
455534C
455554G
455574K
455594X
455174V
-
455214M
455254U
455274B
455294F
455214P
455334T
455354A
455374E
-
455972U
455992B
456012Y
456032M
456052Q
456072U
456092B
456112L
456132P
456152T
455772X
455792S
458812F
455832J
455852N
455872R
-
455912Y
455932M
455952Q
456172A
456232S
456252W
456272D
456332V
456352C
456372G
456392K
456412U
457172E
-
455572Y
455592M
455612W
455632D
455652H
455672L
455692P
455712C
455732G
455752K
455352V
455372C
455392G
455412Q
455432U
455452B
455472F
455492J
-
455532A
ICP 10 000 ppm
Pk 100 ml
455012E
-
455052M
455072Q
455092U
455112H
455132L
455152P
455172T
455192A
455212K
455252S
455272W
455292D
455212N
-
vwr.com | VWR ® for calibration 39
INORGANIC TRACE ANALYSIS
ICP-MS standard
Concentration (ppm)
Europium
Gadolinium
Gallium
Germanium
Gold
Hafnium
Holmium
Indium
Iridium
Iron
Lanthanum
Lead
Lithium
Lutetium
Magnesium
Manganese
Mercury
Molybdenum
Element
Aluminum
Antimony
Arsenic
Barium
Beryllium
Bismuth
Boron
Cadmium
Calcium
Cerium
Cesium
Chromium
Cobalt
Copper
Dysprosium
Erbium
Cat. No.
10 ppm
Matrix
2-5% HNO₃ 85548.180
2% HNO₃/0,5% HF 85560.180
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
H₂O/tr.NH₄OH
2-5% HNO₃
2-5% HNO₃
2% HNO₃
2-5% HNO₃
2% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
85595.180
85549.180
85552.180
85553.180
85554.180
85551.180
85556.180
85555.180
85557.180
85559.180
85558.180
85561.180
85562.180
85563.180
85564.180
85567.180
85566.180
2% HNO₃/0,2% HF 85568.180
2% HCl 85550.180
2% HNO₃/0,5% HF 85569.180
2-5% HNO₃
2-5% HNO₃
10% HCl
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
5% HNO₃
H₂O/tr HF
85571.180
85572.180
85573.180
85565.180
85575.180
85586.180
85576.180
85577.180
85578.180
85579.180
85570.180
85580.180
Matrix
2-5% HNO₃
2-5% HNO₃
-
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
H₂O/tr.NH₄OH
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
2% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
H₂O/tr HF
10% HCl
2% HNO₃/0,5% HF
2-5% HNO₃
2-5% HNO₃
10% HCl
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
10% HNO₃
H₂O/tr.NH₄OH
ICP-MS STANDARDS, ARISTAR ®
‒ Produced from high purity acids, water ASTM I 18 MΩ
‒ Solution assayed by titration
‒
‒ Total maximum uncertainty: ±1%
‒
Final concentration verified against ICP standards from NIST
Delivered with complete Certificate of Analysis
Produced by accreditated supplier in compliance with ISO EN 17034 and
ISO EN 17025.
Safety note: These standards are in acid solutions, for full details of hazards and specification, please see vwr.com
and the links to the Safety Data Sheets (SDS) and
Certificates of Analysis.
Cat. No.
1000 ppm
Cat. No.
1000 ppm
457279J
457281A
456732K
456742M
457292B
457303C
456752X
457314D
456762Q
457325E
456772S
456782U
457336F
456792W
456802H
456812J
457347G
457202A
456632H
456652L
-
456662N
456672P
457213B
456682R
456692T
457224C
457235D
-
457062W
456722Y
457246F
457257G
457268H
ICP-MS standard
Concentration (ppm)
Silver
Sodium
Strontium
Sulphur
Tantalum
Tellurium
Terbium
Thallium
Thulium
Tin
Titanium
Tungsten
Uranium
Vanadium
Ytterbium
Yttrium
Zinc
Zirconium
Element
Neodymium
Nickel
Niobium
Palladium
Phosphorus
Platinum
Potassium
Praseodymium
Rhenium
Rhodium
Rubidium
Ruthenium
Samarium
Scandium
Selenium
Silicon
Cat. No.
10 ppm
Matrix
2-5% HNO₃
2-5% HNO₃
85583.180
85584.180
2% HNO₃/0,5% HF 85582.180
Matrix
2-5% HNO₃
2-5% HNO₃
H₂O/tr HF
2% HNO₃
H₂O
2% HCl
2-5% HNO₃
2-5% HNO₃
H₂O/tr HNO₃
2% HCl
2-5% HNO₃
2% HCl
2% HNO₃
2% HNO₃
2% HNO₃
H₂O/tr HF
2% HNO₃
2-5% HNO₃
2% HNO₃
H₂O
85587.180
85585.180
85589.180
85574.180
85588.180
85591.180
85592.180
85590.180
85593.180
85599.180
85596.180
85597.180
85598.180
85547.180
85581.180
85631.180
85594.180
2% HNO₃/0,5% HF 85632.180
2% HNO₃
2% HNO₃
2% HNO₃
2% HNO₃
10% HCl
H₂O
10% HCl
2-5% HNO₃
2-5% HNO₃
H₂O/tr HNO₃
10% HCl
2-5% HNO₃
10% HCl
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
H₂O/tr HF
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
H₂O
85634.180
H₂O/tr HF
20% HCl
85633.180
85639.180
2-5% HNO₃
2-5% HNO₃
85640.180
–
1% HNO
3
H₂O/tr HF
H₂O/tr.NH₄OH
2% HNO₃
2% HNO₃
2% HNO₃
2% HNO₃
2% HNO₃
2% HNO₃
85630.180
85636.180
85644.180
85641.180
85643.180
85647.180
85646.180
85648.180
85649.180
2% HNO₃/0,5% HF
H₂O/tr HF
H₂O/tr.NH₄OH
–
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
2-5% HNO₃
456902K
456912M
456922X
457459V
457461A
456932Q
456942S
–
456952U
456962W
457494D
–
456972B
457472B
456982D
456992F
457483C
457358H
456832N
457369J
457371K
456842P
457382L
456852R
457393M
457404N
456862T
457415P
457426Q
457437R
456872V
456882A
457448S
456892C
SEE THE
RANGE
VWR Chemicals trace analysis
All you need for metal trace analysis.
‒ High purity NORMATOM ® acids for sample preparation
‒ ICP and ICP-MS single- and multi-element standard solutions
‒ AAS standard solutions at 1000 mg/L
‒ IC single- and multi-element standard solutions
‒ Custom manufacturing services
40 VWR ® for calibration | vwr.com
PB20065-EN
INORGANIC TRACE ANALYSIS
ARISTAR ® ICP AND ICP-MS MULTI-ELEMENT STANDARDS
Multi-element standards are directly traceable to NIST. A Certificate of Analysis is delivered with each product including exact data on content, composition, traceability, date of release and minimum shelf life.
Description
ICP multi-element solution according USP232 dietary supplements 4 elements: Cd 5 mg/L, Pb 10 mg/L, as 15 mg/L, Hg 15 mg/L in HNO
3
7%
ICP multi-element solution according USP232 oral dose 8 elements: Cd 25 mg/L, Pb 5 mg/L, as 1,5 mg/L, Hg 15 mg/L, Mo 100 mg/L, Ni 500 mg/L,
V 100 mg/L, Cu 1000 mg/L in HNO
3
7%
ICP multi-element solution diluted according USP232 oral dose 8 elements: Cd 2,5 mg/L, Pb 5 mg/L, as 1,5 mg/L, Hg 1,5 mg/L, Mo 10 mg/L, Ni 50 mg/L,
V 10 mg/L, Cu 100 mg/L in HNO
3
7%
ICP multi-element solution according USP232 parental dose 6 elements: 100 mg/L each of Ir; Pt; Os; Rh; Pd; Ru in HCl 15%
ICP multi-element solution according USP232 parental dose 6 elements: 10 mg/L each of Ir; Pt; Os; Rh; Pd; Ru in HCl 15%
Cat. No.
85035.180
85036.180
85037.180
85038.180
85039.180
3
4
ARISTAR ® ICP and ICP-MS multi-element standards
No. Element Composition
ICP nitric acid calibration blank ARISTAR
Multi-element quality control/calibration standards for ICP
® : HNO
3
5% in H
2
0
K 10000 mg/L, Li 250 mg/L, Na 1000 mg/L
1000 mg/L: Ba, Ca, Mg, Sr
7 Ag 50 mg/L, Al, B, Ba, Na at 100 mg/L, K at 1000 mg/L, Si 500 mg/
9
15
19
21
21
22
23
23
100 mg/L: Au, Ir, Os, Pd, Pt, Rh, Ru, Sn, Te
100 mg/L: Al, Ba, Cd, Ca, Cr, Co, Cu, Fe, Pb, Mg, Mn, Ni, Na, Ti, Zn
Ag, Ni 50 mg/L, Al 100 mg/L, B, Fe 15 mg/L, Ba, Mn 5 mg/L, Be, Sr 1 mg/L, Bi, In, Pb 200 mg/L, Cd, Co, Cu, Zn 20 mg/L, Cr 25 mg/L, Ga 150 mg/L, Tl 40 mg/L
100 mg/L: Al, As, B, Ca, Cd, Cr, Co, Cu, Fe, K, Mg, Mn, Mo, Na, Ni, Pb, P, Ti, Zn, Si, S
1000 mg/L: Ag, As, Al, B, Ba, Bi, Cd, Co, Cr, Cu, Fe, Ga, In, Li, Mn, Ni, Pb, Sr, Tl, Zn, Si
10 mg/L: As, Ba, Be, Cd, Co, Cr, Cu, Fe, Al, Mn, Mo, Ni, Pb, Sb, Se, Sn, Ti, Tl, V, U, Te, Zn
100 mg/L: As, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, Li, Mg, Mn, Mo, Ni, Pb, Sb, Se, Sr, Ti, Tl, V, Zn
100 mg/L: As, Be, Ca, Cd, Co, Cr, Cu, Fe, Li, Mg, Mn, Mo, Ni, P, Pb, Sb, Se, Sn, Sr, Ti, Tl, V, Zn
9
9
12
12
23
28
28
1000 mg/L: Ag, Al, B, Ba, Bi, Ca, Cd, Co, Cr, Cu, Fe, Ga, In, K, Li, Mg, Mn, Na, Ni, Pb, Sr, Tl, Zn
1 mg/L: Al, Ag, As, B, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Sb, Se, Sr, Ti, Tl, V, Zn
32
33
24
100 mg/L: Al, Ag, As, B, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Sb, Se, Sr, Ti, Tl, V, Zn
100 mg/L: Ag, Al, Ba, Bi, Ca, Cd, Co, Cr, Cu, Fe, Ga, Ge, In, K, Li, Mg, Mn, Mo, Na, Nb, Ni, P, Pb, Re, Sb, Si, Sn, Ta, Ti,
V, W, Zn
100 mg/L: Al, Ag, As, B, Ba, Be, Bi, Ca, Cd, Cs, Co, Cr, Cu, Fe, In, K, Li, Mg, Mn, Mo, Na, Ni, Nb, Pb, Rb, Sb, Se, Sr, Ti,
Tl, V, U, Zn
100 mg/L each of Al; B; Ba; Be; Bi; Ca; Cd; Co; Cr; Cu; Fe; Ga; K; Li; Mg; Mn; Na; N ; Pb; Se; Sr; Te; Tl; Zn
9 100 mg/L each of As; Be; Pb; Cd; Cr; Ni; Hg; Se; Tl HNO₃ 5%
As 50 µ/l; B 100 µ/l; Ba 50 µ/l; Be 20 µ/l; Bi 10 µ/l; Ca 35000 µ/l; Cd 20 µ/l; Co 25 µ/l; Cr 20
µ/l; Cu 20 µ/l; Fe 100 µ/l; K 3000 µ/l; Mg 15000 µ/l; Mn 30 µ/l; Mo 100 µ/l; Na 8000 µ/l; Ni 50
µ/l; Pb 25 µ/l; Se 10 µ/l; Sr 100 µ/l; Tl 10 µ/l; V 50 µ/l; Zn 50 µ/l 23
7
15
7
Cd 10 mg/L; Cr 900 mg/L; Cu 800 mg/L; Ni 200 mg/L; Pb 900 mg/L; Zn 2500 mg/L; Hg 8 mg/L
500 mg/L Al; 250 mg/L V; 100 mg/L As, Be, Co, Cr, Cu, Fe, Mn, Ni, Pb, Zn; 25 mg/L Cd, Se; 5 mg/L Hg;
100 mg/L each of Hf; Ir; Sb; Sn; Ta; Ti; Zr
Multi-element quality control standards for ICP-MS
100 mg/L: Be, I, Bi, Li, Cr, Mg, Co, Pb, U
10 mg/L: Be, Bi, Ce, Co, In, Pb, Mg, Ni, U
10 mg/L: Hf, Ge, Mo, Nb, Sb, Si, Sn, Ta, Te, Ti, W, Zr
10 mg/L: B, Ge, Mo, Nb, P, Re, S, Si, Ta, Ti, W, Zr
17
25
10 mg/L: Ce, Dy, Er, Eu, Gd, Ho, La, Lu, Nd, Pr, Sc, Sm, Tb, Th, Tm, Y, Yb
10 mg/L: Ag, Al, As, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Mo, Na, Ni, Pb, Sb, Se, Th, Tl, U, V, Zn
29
30
36
10 mg/L: Ag, Al, As, Ba, Be, Bi, Ca, Cd, Co, Cr, Cs, Cu, Fe, Ga, In, K, Li, Mg, Mn, Na, Ni, P, Rb, Se, Sr, Tl, U, V, ZN
1000 mg/L: As, B, Be, Fe, Se, Zn at 100 mg/L, Ba, Bi, Cd, Co, Cr, Cu, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Rb, Sr, Te, Ti, U, V at 10 mg/L,Ca
10 mg/L: Al, Ag, As, B, Ba, Ca, Cd, Ce, Co, Cr, Cu, Dy, Er, Eu, Fe, Gd, Ho, K, La, Li, Lu, Mg, Mn, Na, Nd, Ni, P, Pb, Rb,
Se, Sm, Sr, Tl, Tm, V, Zn
ICP-MS Tuning solutions
8
13
100 mg/L: Ba, Be, Cu, In, Li, Mg, Tl, U
100 mg/L: Ba, Be, Bi, Ce, Cu, Ho, In, Li, Mg, Pb, Tl, U, Y
ICP-MS interference check
11 Ag, C, Cr, Cu, Mn, Ni, V at 20 mg/L, As, Cd, Se, Zn at 10 mg/L
12 Cl 18000 mg/L: Al, K, Mg, P, S 1000 mg/L, C 2000 mg/L, Ca 3000 mg/L, Fe, Na 2500 mg/L, Mo, Ti 20 mg/L
ARISTAR ® grade matrix
Water
HNO
3
2%
HNO
3
2%
HNO
3
5%, HF traces
HCl 10%
HNO
3
5%
HNO
3
5%
HNO₃ 5%
HNO
3
4%
HNO
3
5%
HNO
3
5%
HNO
3
5%, HF traces
HNO
3
5%
HNO
3
2%
HNO
3
2%
HNO
3
5%
HNO
3
5%
HNO₃ 2%
HNO₃ 5%
HNO₃ 5%
HNO₃ 5%
HCl/tr. HF/tr.HNO₃ 15%
HNO
3
5%
HNO
3
2%
HNO
3
2%, HF traces
Water
HNO
3
5%
HNO
3
5%
HNO5 5%
HNO
3
2%, HF traces
HNO
3
2%
HNO
3
2%
HNO
3
2%
HNO₃ 1%
HNO
3
1%
250
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Pk (ml)
500
100
100
100
100
100
100
100
50
100
100
500
100
100
100
100
100
100
500
100
100
500
Cat. No.
456484N
456462H
456472J
456432B
456434D
84792.18
456442D
456444F
456452F
89166.180
87629.180
88724.150
84790.180
456422W
456424B
85025.180
5200.185
85006.186
89186.180
84791.180
87047.180
87048.180
87044.180
87046.180
87045.180
87049.180
88175.230
456592Q
84794.180
456522C
456622F
456602B
456502V
85026.180
84793.180
456532E
456542G
456562K
456552Y
vwr.com | VWR ® for calibration 41
INORGANIC TRACE ANALYSIS
IC STANDARDS, ARISTAR ®
Ion chromatography (IC) is used in many different industries such as food and beverage, environmental, life sciences, pharmaceutical, power generation, electronics and many more. The large number of applications include analytes like inorganic anions and cations, organic acids, carbohydrates, amino acids, proteins, fatty acids, polysaccharides, polyphosphates, surfactants and more.
‒ High quality
‒ Complete range of 52 elements
‒ Available in 100 ml and also in 500 ml packs for the most commonly used materials
‒ Certificate of Analysis delivered with the product in individual packaging
‒ Traceability to NIST
‒ Control lab accreditated to ISO EN 17034 and ISO EN 17025
Please note all products are 1000 mg/L in water unless otherwise stated.
Description
Acetate
Ammonium
Ammonium (in N)
Barium
Benzoate
Bromate
Bromide
Calcium
Cesium
Chlorate
Chlorite 1000 mg/L in NaOH solution
Chloride
Chromate (in Cr VI)
Citrate water
Fluoride
Formate
Glycolate
Hydrogenophthalate
Hydrogenosulphite
Iodate
Iodide
Lactate
Lithium
Magnesium
Maleate
Methane sulphonate
3-Methoxypropylamine
Cat. No. Pk 100 ml
84951.180
84952.180
84953.180
84954.180
84955.180
84956.180
84957.180
84958.180
84959.180
84960.180
84961.180
84962.180
84963.180
84965.180
84966.180
84967.180
84968.180
84969.180
84970.180
84971.180
84972.180
84973.180
84974.180
84975.180
84976.180
84977.180
84978.180
Cat. No. Pk 500 ml
-
84952.260
84953.260
-
84957.260
-
-
84962.260
-
-
-
-
-
-
84966.260
-
-
84972.260
-
-
-
-
-
84975.260
-
-
-
Description
Monoethanolamine
Monomethylamine
Nitrate
Nitrate (in N)
Nitrilotriacetate
Nitrite
Nitrite (in N)
Oxalate
Perchlorate
Phosphate
Phosphate (in P)
Potassium
Propionate
Silicate
Sodium
Strontium
Succinate
Sulphate
Sulphite (in HSO
3
-)
Tartrate
Thiocyanate
Thiosulphate 1000 mg/L in amylic alcohol
Triethanolamine
Triethylamine
Trimetylamine
Cat. No. Pk 100 ml
84979.180
84980.180
84981.180
84982.180
84983.180
84984.180
84985.180
84986.180
84987.180
84988.180
84989.180
84990.180
84991.180
84992.180
84993.180
84994.180
84995.180
84996.180
84997.180
84998.180
84999.180
85000.180
85001.180
85002.180
85003.180
Cat. No. Pk 500 ml
-
84981.260
-
84982.260
-
84984.260
84985.260
84988.260
84989.260
84990.260
-
-
-
84993.260
-
-
-
84996.260
84997.260
-
-
-
-
-
-
MULTI-ELEMENT STANDARDS, ANIONIC, FOR ION CHROMATOGRAPHY, ARISTAR ®
‒ Traceable to NIST
‒ Manufactured and tested under ISO EN 17034 and ISO EN 17025 accredited facilities
‒ Supplied with a Certificate of Analysis
Description Contents
IC anion multi-element standard solution I F,Br, PO
4
at 1000 mg/L each
IC anion multi-element standard solution II Cl, NO
IC multi-element standard solution I
IC multi-element standard solution V
4
, SO mg/L, PO
4
4
at 1000 mg/L each
F 100mg/L, Cl 250 mg/L, NO
1000 mg/L
F and Br 10 mg/L, NO
3
Cl 100 mg/L and SO
4
3
and SO
4
500
andv PO
200 mg/L
4
50 mg/L,
Concentration Pk
1000 mg/L
1000 mg/L
500 ml
500 ml
Cat. No
87037.260
87038.260
100 - 1000 mg/L 500 ml 87039.260
10 - 200 mg/L 100 ml 87040.180
MULTI-ELEMENT STANDARDS, CATIONIC FOR ION CHROMATOGRAPHY, ARISTAR ®
‒ Traceable to NIST
‒ Manufactured and tested in ISO EN 17034 and ISO EN 17025 accredited facilities
‒
‒
Supplied with a Certificate of Analysis
Ion chromatography cation multi-element standard solution VII, ARISTAR
(100 mg/L: Li, Na, K, NH
4
, Mn, Ca, Mg, Sr, Ba in 0.1% HNO
3
)
®
Description
Ion chromatography cation multi-element standard solution VII
Ion chromatography cation multi-element standard solution VI
Concentration
100 mg/L: Ba
2
+, Ca
2
+, K+, Li+, Mg
2
+, Mn
2
+, Na+, NH₄+, Sr
2
+
100 mg/L: NH
4
10, K 50, Na, Ca and Mg 100 mg/L
42 VWR ® for calibration | vwr.com
Pk
100 ml
100 ml
Cat. No
87041.180
87042.180
SULPHUR CERTIFIED REFERENCE MATERIALS
Description
Sulphur in light mineral oil
Sulphur in light mineral oil
Sulphur in light mineral oil
Sulphur in light mineral oil
Sulphur in light mineral oil
Sulphur in light mineral oil
Sulphur in light mineral oil
Sulphur in light mineral oil
Sulphur in light mineral oil
Sulphur in light mineral oil
Sulphur in light mineral oil
Concentration
0,0005% (5ppm)
0,0010% (10ppm)
0,0025% (25ppm)
0,0050% (50ppm)
0,0100% (100ppm)
0,0250% (250ppm)
0,0300% (300ppm)
0,0500% (500ppm)
0,0700% (700ppm)
0,0750% (750ppm)
0,1000% (1000ppm)
Pk
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
SULPHUR, CERTIFIED REFERENCE MATERIALS, IN LIGHT MINERAL OIL
Sulphur CRMs are suitable for calibration, verification or for use in quality control procedures used for analysing sulphur content in petroleum products.
‒ Certified in strict accordance to ISO 17025 and ISO 17034 under UKAS accreditation
‒ Highest level of accreditation guarantee, providing the most credible certified data available worldwide
‒ Suitable for but not limited to internationally recognised test methods and protocols: ASTM D2622, ASTM D3120, ASTM D4294, ASTM D5453, ASTM D7039, IP
336, IP 496, IP 497
‒ Fully traceable to International Standards and low levels of uncertainty achieves maximum accuracy of data
‒ Supplied in 100 ml volume, tamper-evident glass packaging, providing assurance of sample integrity
Quantitative analysis of sulphur in crude oil, petroleum products and feedstock is extremely important to ensure compliance with regulatory bodies and legislation, failure to do so can result in costly fines. Analysis techniques for sulphur content measurement include wet chemistry, X-ray fluorescence, atomic spectroscopy and various thermal combustion methods with different detection limits. Regardless of the technique employed for measurement, robust analytical data is paramount, calibration and/or verification.
Convenient sets, are available for different testing criteria.
UKAS ISO 17025 & ISO 17034
Cat. No.
99187.180
99188.180
99189.180
99190.180
99191.180
99192.180
99193.180
99194.180
99195.180
99196.180
99197.180
Description
Sulphur in light mineral oil
Sulphur in light mineral oil
Sulphur in light mineral oil
Sulphur in light mineral oil
Sulphur in light mineral oil
Sulphur in light mineral oil
Sulphur in light mineral oil
Sulphur in light mineral oil
Sulphur in light mineral oil
Sulphur in light mineral oil
Concentration
0,2500% (2500ppm)
0,3000% (3000ppm)
0,5000% (5000ppm)
1,0000% (10000ppm)
1,5000% (15000ppm)
2,0000% (20000ppm)
3,0000% (30000ppm)
4,0000% (40000ppm)
5,0000% (50000ppm)
0% (0 ppm) / Blank
Pk
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
Description
Sulphur in light mineral oil, calibration set A
Sulphur in light mineral oil, calibration set B
Sulphur in light mineral oil, calibration set C
Sulphur in light mineral oil, calibration set A
Sulphur in light mineral oil, calibration set B
Sulphur in light mineral oil, calibration set C
Sulphur in light mineral oil, calibration set A
Sulphur in light mineral oil, calibration set B
Sulphur in light mineral oil, calibration set A
Sulphur in light mineral oil, calibration set B
Sulphur in light mineral oil, calibration set A
Sulphur in light mineral oil, calibration set B
Sulphur in light mineral oil, calibration set C
Sulphur in light mineral oil, calibration set D
Sulphur in light mineral oil, calibration set E
Sulphur in light mineral oil, calibration set F
Sulphur in light mineral oil, calibration set A
Sulphur in light mineral oil, calibration set A
Concentration
Blank, 5 ppm, 10 ppm, 100 ppm, 250 ppm, 500 ppm, 750 ppm, 1000 ppm
1000 ppm, 2500 ppm, 5000 ppm,10000 ppm
10000 ppm, 20000 ppm, 30000 ppm, 40000 ppm, 50000 ppm
Blank, 5 ppm, 10 ppm, 100 ppm, 250 ppm, 500 ppm, 750 ppm, 1000 ppm
1000 ppm, 2500 ppm, 5000 ppm, 10000 ppm
10000 ppm, 20000 ppm, 30000 ppm, 40000 ppm, 50000 ppm
Blank, 5 ppm, 50 ppm, 250 ppm, 500 ppm
Blank, 25 ppm, 100 ppm, 500 ppm, 1000 ppm, 3000 ppm
Blank, 5 ppm, 10 ppm, 25 ppm, 50 ppm
50 ppm, 100 ppm, 250 ppm, 500 ppm, 750 ppm, 1000 ppm
Blank, 300 ppm, 500 ppm, 700 ppm, 1000 ppm
Blank, 1000 ppm, 3000 ppm, 5000 ppm
5000 ppm, 10000 ppm, 15000 ppm, 20000 ppm
20000 ppm, 30000 ppm, 40000 ppm, 50000 ppm
Blank, 300 ppm, 500 ppm, 700 ppm, 1000 ppm, 3000 ppm, 5000 ppm
5000 ppm, 10000 ppm, 15000 ppm, 20000 ppm, 30000 ppm, 40000 ppm,
50000 ppm
Blank, 100 ppm, 300 ppm, 500 ppm, 700 ppm, 1000 ppm
Blank, 50 ppm, 100 ppm, 250 ppm, 300 ppm, 500 ppm
Test method
ASTM D2622
ASTM D2622
ASTM D2622
ASTM D4294
ASTM D4294
ASTM D4294
ASTM D7039
ASTM D7039
ASTM D7220
ASTM D7220
IP 336
IP 336
IP 336
IP 336
IP 336
IP 336
IP 496
IP 497
Packed
8x100 ml
4x100 ml
5x100 ml
8x100 ml
4x100 ml
5x100 ml
5x100 ml
6x100 ml
5x100 ml
6x100 ml
5x100 ml
4x100ml
4x100ml
4x100 ml
7x100 ml
7x100 ml
6x100 ml
6x100 ml
Pk
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
Cat. No.
99250.001
99251.001
99252.001
99256.001
99257.001
99258.001
99262.001
99263.001
99266.001
99267.001
99270.001
99271.001
99272.001
99273.001
99274.001
99275.001
99282.001
99284.001
Cat. No.
99198.180
99199.180
99200.180
99201.180
99202.180
99203.180
99204.180
99205.180
99206.180
99207.180
vwr.com | VWR ® for calibration 43
SULPHUR CERTIFIED REFERENCE MATERIALS
SULPHUR, CERTIFIED REFERENCE MATERIALS, IN HEAVY MINERAL OIL
Sulphur CRMs are suitable for calibration, verification or for use in quality control procedures used for analysing sulphur content in petroleum products.
‒ Certified in strict accordance to ISO 17025 and ISO 17034 under UKAS accreditation
‒ Highest level of accreditation guarantee, providing the most credible certified data available worldwide
‒ Suitable for but not limited to internationally recognised test methods and protocols: ASTM D2622, ASTM D3120, ASTM D4294, ASTM D5453, ASTM D7039, IP
336, IP 496, IP 497
‒ Fully traceable to International Standards and low levels of uncertainty achieves maximum accuracy of data
‒ Supplied in 100 ml volume, tamper-evident glass packaging, providing assurance of sample integrity
Quantitative analysis of sulphur in crude oil, petroleum products and feedstock is extremely important to ensure compliance with regulatory bodies and legislation, failure to do so can result in costly fines. Analysis techniques for sulphur content measurement include wet chemistry, X-ray fluorescence, atomic spectroscopy and various thermal combustion methods with different detection limits. Regardless of the technique employed for measurement, robust analytical data is paramount, calibration and/or verification.
Convenient sets, are available for different testing criteria.
UKAS ISO 17025 & ISO 17034
Description
Sulphur in heavy mineral oil
Sulphur in heavy mineral oil
Sulphur in heavy mineral oil
Sulphur in heavy mineral oil
Sulphur in heavy mineral oil
Sulphur in heavy mineral oil
Sulphur in heavy mineral oil
Sulphur in heavy mineral oil
Sulphur in heavy mineral oil
Sulphur in heavy mineral oil
Sulphur in heavy mineral oil
Concentration
0,0005% (5 ppm)
0,0010% (10 ppm)
0,0025% (25 ppm)
0,0050% (50 ppm)
0,0100% (100 ppm)
0,0250% (250 ppm)
0,0300% (300 ppm)
0,0500% (500 ppm)
0,0700% (700 ppm)
0,0750% (750 ppm)
0,1000% (1000 ppm)
Pk
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
New Standards for
Petrochemistry brochure
Cat. No.
99208.180
99209.180
99210.180
99211.180
99212.180
99213.180
99214.180
99215.180
99216.180
99217.180
99218.180
Description
Sulphur in heavy mineral oil
Sulphur in heavy mineral oil
Sulphur in heavy mineral oil
Sulphur in heavy mineral oil
Sulphur in heavy mineral oil
Sulphur in heavy mineral oil
Sulphur in heavy mineral oil
Sulphur in heavy mineral oil
Sulphur in heavy mineral oil
Sulphur in heavy mineral oil
Concentration
0,2500% (2500 ppm)
0,3000% (3000 ppm)
0,5000% (5000 ppm)
1,0000% (10000 ppm)
1,5000% (15000 ppm)
2,0000% (20000 ppm)
3,0000% (30000 ppm)
4,0000% (40000 ppm)
5,0000% (50000 ppm)
0% (0 ppm) / Blank
Pk
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
Cat. No.
99219.180
99220.180
99221.180
99222.180
99223.180
99224.180
99225.180
99226.180
99227.180
99228.180
Description
Sulphur in heavy mineral oil, calibration set A
Sulphur in heavy mineral oil, calibration set B
Sulphur in heavy mineral oil, calibration set C
Sulphur in heavy mineral oil, calibration set A
Sulphur in heavy mineral oil, calibration set B
Sulphur in heavy mineral oil, calibration set C
Sulphur in heavy mineral oil, calibration set A
Sulphur in heavy mineral oil, calibration set B
Sulphur in heavy mineral oil, calibration set A
Sulphur in heavy mineral oil, calibration set B
Sulphur in heavy mineral oil, calibration set A
Sulphur in heavy mineral oil, calibration set B
Sulphur in heavy mineral oil, calibration set C
Sulphur in heavy mineral oil, calibration set D
Sulphur in heavy mineral oil, calibration set E
Sulphur in heavy mineral oil, calibration set F
Sulphur in heavy mineral oil, calibration set A
Sulphur in heavy mineral oil, calibration set A
Concentration
Blank, 5 ppm, 10 ppm, 100 ppm, 250 ppm, 500 ppm, 750 ppm, 1000 ppm
1000 ppm, 2500 ppm, 5000 ppm,10000 ppm
10000 ppm, 20000 ppm, 30000 ppm, 40000 ppm, 50000 ppm
Blank, 5 ppm, 10 ppm, 100 ppm, 250 ppm, 500 ppm, 750 ppm, 1000 ppm
1000 ppm, 2500 ppm, 5000 ppm, 10000 ppm
10000 ppm, 20000 ppm, 30000 ppm, 40000 ppm, 50000 ppm
Blank, 5 ppm, 50 ppm, 250 ppm, 500 ppm
Blank, 25 ppm, 100 ppm, 500 ppm, 1000 ppm, 3000 ppm
Blank, 5 ppm, 10 ppm, 25 ppm, 50 ppm
50 ppm, 100 ppm, 250 ppm, 500 ppm, 750 ppm, 1000 ppm
Blank, 300 ppm, 500 ppm, 700 ppm, 1000 ppm
Blank, 1000 ppm, 3000 ppm, 5000 ppm
5000 ppm, 10000 ppm, 15000 ppm, 20000 ppm
20000 ppm, 30000 ppm, 40000 ppm, 50000 ppm
Blank, 300 ppm, 500 ppm, 700 ppm, 1000 ppm, 3000 ppm, 5000 ppm
5000 ppm, 10000 ppm, 15000 ppm, 20000 ppm, 30000 ppm, 40000 ppm,
50000 ppm
Blank, 100 ppm, 300 ppm, 500 ppm, 700 ppm, 1000 ppm
Blank, 50 ppm, 100 ppm, 250 ppm, 300 ppm, 500 ppm
Test method
ASTM D2622
ASTM D2622
ASTM D2622
ASTM D4294
ASTM D4294
ASTM D4294
ASTM D7039
ASTM D7039
ASTM D7220
ASTM D7220
IP 336
IP 336
IP 336
IP 336
IP 336
IP 336
IP 496
IP 497
Pk
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
Packed
8x100 ml
4x100 ml
5x100 ml
8x100 ml
4x100 ml
5x100 ml
5x100 ml
6x100 ml
5x100 ml
6x100 ml
5x100 ml
4x100ml
4x100ml
4x100 ml
7x100 ml
7x100 ml
6x100 ml
6x100 ml
Cat. No.
99253.001
99254.001
99255.001
99259.001
99260.001
99261.001
99264.001
99265.001
99268.001
99269.001
99276.001
99277.001
99278.001
99279.001
99280.001
99281.001
99283.001
99285.001
44 VWR ® for calibration | vwr.com
SULFUR CERTIFIED REFERENCE MATERIALS
SULPHUR, CERTIFIED REFERENCE MATERIALS, IN SYNTHETIC DIESEL
CRMs are suitable for calibration, verification or for use in quality control procedures used for analysing sulphur content in petroleum products.
‒ Certified in strict accordance to ISO 17025 and ISO 17034 under UKAS accreditation
‒ Highest level of accreditation guarantee, providing the most credible certified data available worldwide
‒ Suitable for but not limited to internationally recognised test methods and protocol:
ASTM D2622, ASTM D3120, ASTM D4294, ASTM D5453, ASTM D7039, IP 336, IP 496,
IP 497
‒ Fully traceable to International Standards and low levels of uncertainty achieves maximum accuracy of data
‒ Supplied in 100 ml volume, tamper-evident glass packaging, providing assurance of sample integrity
Quantitative analysis of sulphur in crude oil, petroleum products and feedstock is extremely important to ensure compliance with regulatory bodies and legislation, failure to do so can result in costly fines. Analysis techniques for Sulfur content measurement include wet chemistry, X-ray fluorescence, atomic spectroscopy and various thermal combustion methods with different detection limits. Regardless of the technique employed for measurement, robust analytical data is paramount, calibration and/or verification.
Convenient sets, are available for different testing criteria.
UKAS ISO 17025 & ISO 17034
Description
Sulphur in synthetic diesel
Sulphur in synthetic diesel
Sulphur in synthetic diesel
Sulphur in synthetic diesel
Sulphur in synthetic diesel
Sulphur in synthetic diesel
Sulphur in synthetic diesel
Sulphur in synthetic diesel
Sulphur in synthetic diesel
Sulphur in synthetic diesel
Sulphur in synthetic diesel
Concentration
0,0005% (5 ppm)
0,0010% (10 ppm)
0,0025% (25 ppm)
0,0050% (50 ppm)
0,0100% (100 ppm)
0,0250% (250 ppm)
0,0300% (300 ppm)
0,0500% (500 ppm)
0,0700% (700 ppm)
0,0750% (750 ppm)
0,1000% (1000 ppm)
Pk
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
Cat. No.
99229.180
99230.180
99231.180
99232.180
99233.180
99234.180
99235.180
99236.180
99237.180
99238.180
99239.180
Description
Sulfur in synthetic diesel
Sulfur in synthetic diesel
Sulfur in synthetic diesel
Sulfur in synthetic diesel
Sulfur in synthetic diesel
Sulfur in synthetic diesel
Sulfur in synthetic diesel
Sulfur in synthetic diesel
Sulfur in synthetic diesel
Sulfur in synthetic diesel
Concentration
0,2500% (2500 ppm)
0,3000% (3000 ppm)
0,5000% (5000 ppm)
1,0000% (10000 ppm)
1,5000% (15000 ppm)
2,0000% (20000 ppm)
3,0000% (30000 ppm)
4,0000% (40000 ppm)
5,0000% (50000 ppm)
0% (0 ppm) / Blank
Pk
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
Cat. No.
99240.180
99241.180
99242.180
99243.180
99244.180
99245.180
99246.180
99247.180
99248.180
99249.180
Description
Sulphur in synthetic diesel, calibration set A
Sulphur in synthetic diesel, calibration set B
Sulphur in synthetic diesel, calibration set C
Sulphur in synthetic diesel, calibration set A
Sulphur in synthetic diesel, calibration set B
Sulphur in synthetic diesel, calibration set C
Sulphur in synthetic diesel, calibration set A
Sulphur in synthetic diesel, calibration set B
Sulphur in synthetic diesel, calibration set A
Sulphur in synthetic diesel, calibration set B
Sulphur in synthetic diesel, calibration set A
Sulphur in synthetic diesel, calibration set B
Sulphur in synthetic diesel, calibration set C
Sulphur in synthetic diesel, calibration set D
Sulphur in synthetic diesel, calibration set E
Sulphur in synthetic diesel, calibration set F
Sulphur in synthetic diesel, calibration set A
Sulphur in synthetic diesel, calibration set A
Concentration
Blank, 5 ppm, 10 ppm, 100 ppm, 250 ppm, 500 ppm, 750 ppm, 1000 ppm
1000 ppm, 2500 ppm, 5000 ppm,10000 ppm
10000 ppm, 20000 ppm, 30000 ppm, 40000 ppm, 50000 ppm
Blank, 5 ppm, 10 ppm, 100 ppm, 250 ppm, 500 ppm, 750 ppm, 1000 ppm
1000 ppm, 2500 ppm, 5000 ppm, 10000 ppm
10000 ppm, 20000 ppm, 30000 ppm, 40000 ppm, 50000 ppm
Blank, 5 ppm, 50 ppm, 250 ppm, 500 ppm
Blank, 25 ppm, 100 ppm, 500 ppm, 1000 ppm, 3000 ppm
Blank, 5 ppm, 10 ppm, 25 ppm, 50 ppm
50 ppm, 100 ppm, 250 ppm, 500 ppm, 750 ppm, 1000 ppm
Blank, 300 ppm, 500 ppm, 700 ppm, 1000 ppm
Blank, 1000 ppm, 3000 ppm, 5000 ppm
5000 ppm, 10000 ppm, 15000 ppm, 20000 ppm
20000 ppm, 30000 ppm, 40000 ppm, 50000 ppm
Blank, 300 ppm, 500 ppm, 700 ppm, 1000 ppm, 3000 ppm, 5000 ppm
5000 ppm, 10000 ppm, 15000 ppm, 20000 ppm, 30000 ppm, 40000 ppm,
50000 ppm
Blank, 100 ppm, 300 ppm, 500 ppm, 700 ppm, 1000 ppm
Blank, 50 ppm, 100 ppm, 250 ppm, 300 ppm, 500 ppm
Test method
ASTM D2622
ASTM D2622
ASTM D2622
ASTM D4294
ASTM D4294
ASTM D4294
ASTM D7039
ASTM D7039
ASTM D7220
ASTM D7220
IP 336
IP 336
IP 336
IP 336
IP 336
IP 336
IP 496
IP 497
Packed
8x100 ml
4x100 ml
5x100 ml
8x100 ml
4x100 ml
5x100 ml
5x100 ml
6x100 ml
5x100 ml
6x100 ml
5x100 ml
4x100 ml
4x100 ml
4x100 ml
7x100 ml
7x100 ml
6x100 ml
6x100 ml
Pk
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
Cat. No.
99286.001
99287.001
99288.001
99289.001
99290.001
99291.001
99292.001
99293.001
99294.001
99295.001
99296.001
99297.001
99298.001
99299.001
99300.001
99301.001
99302.001
99303.001
vwr.com | VWR ® for calibration 45
SULFUR CERTIFIED REFERENCE MATERIALS
SULPHUR, CERTIFIED REFERENCE MATERIALS, IN ODOURLESS KEROSENE
Sulphur CRMs are suitable for calibration, verification or for use in quality control procedures used for analysing sulphur content in petroleum products.
‒ Certified in strict accordance to ISO 17025 and ISO 17034 under UKAS accreditation
‒ Highest level of accreditation guarantee, providing the most credible certified data available worldwide
‒ Suitable for but not limited to internationally recognised test methods and protocol: ASTM D2622, ASTM D3120, ASTM D4294, ASTM D5453, ASTM D7039,
IP 336, IP 496, IP 497
‒ Fully traceable to International Standards and low levels of uncertainty achieves maximum accuracy of data
‒ Supplied in 100 ml volume, tamper-evident glass packaging, providing assurance of sample integrity
Quantitative analysis of sulphur in crude oil, petroleum products and feedstock is extremely important to ensure compliance with regulatory bodies and legislation, failure to do so can result in costly fines. Analysis techniques for sulphur content measurement include wet chemistry, X-ray fluorescence, atomic spectroscopy and various thermal combustion methods with different detection limits. Regardless of the technique employed for measurement, robust analytical data is paramount, calibration and/or verification.
Convenient sets, are available for different testing criteria.
UKAS ISO 17025 & ISO 17034
Description
Sulphur in odourless kerosene
Sulphur in odourless kerosene
Sulphur in odourless kerosene
Sulphur in odourless kerosene
Sulphur in odourless kerosene
Sulphur in odourless kerosene
Sulphur in odourless kerosene
Sulphur in odourless kerosene
Sulphur in odourless kerosene
Sulphur in odourless kerosene
Sulphur in odourless kerosene
Concentration
0,0005% (5 ppm)
0,0010% (10 ppm)
0,0025% (25 ppm)
0,0050% (50 ppm)
0,0100% (100 ppm)
0,0250% (250 ppm)
0,0300% (300 ppm)
0,0500% (500 ppm)
0,0700% (700 ppm)
0,0750% (750 ppm)
0,1000% (1000 ppm)
Pk
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
New standards for
Petrochemistry brochure
Cat. No.
99304.180
99305.180
99306.180
99307.180
99308.180
99309.180
99310.180
99311.180
99312.180
99313.180
99314.180
Description
Sulphur in odourless kerosene
Sulphur in odourless kerosene
Sulphur in odourless kerosene
Sulphur in odourless kerosene
Sulphur in odourless kerosene
Sulphur in odourless kerosene
Sulphur in odourless kerosene
Sulphur in odourless kerosene
Sulphur in odourless kerosene
Sulphur in odourless kerosene
Concentration
0,2500% (2500 ppm)
0,3000% (3000 ppm)
0,5000% (5000 ppm)
1,0000% (10000 ppm)
1,5000% (15000 ppm)
2,0000% (20000 ppm)
3,0000% (30000 ppm)
4,0000% (40000 ppm)
5,0000% (50000 ppm)
0% (0 ppm) / Blank
Pk
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
100 ml
Cat. No.
99315.180
99316.180
99317.180
99318.180
99319.180
99320.180
99321.180
99322.180
99323.180
99324.180
Description
Sulphur in kerosene (odourless), calibration set A
Sulphur in kerosene (odourless), calibration set B
Sulphur in kerosene (odourless), calibration set C
Sulphur in kerosene (odourless), calibration set A
Sulphur in kerosene (odourless), calibration set B
Sulphur in kerosene (odourless), calibration set C
Sulphur in kerosene (odourless), calibration set A
Sulphur in kerosene (odourless), calibration set B
Sulphur in kerosene (odourless), calibration set A
Sulphur in kerosene (odourless), calibration set B
Sulphur in kerosene (odourless), calibration set A
Sulphur in kerosene (odourless), calibration set B
Sulphur in kerosene (odourless), calibration set C
Sulphur in kerosene (odourless), calibration set D
Sulphur in kerosene (odourless), calibration set E
Sulphur in kerosene (odourless), calibration set F
Sulphur in kerosene (odourless), calibration set A
Sulphur in kerosene (odourless), calibration set A
Concentration
Blank, 5 ppm, 10 ppm, 100 ppm, 250 ppm, 500 ppm, 750 ppm, 1000 ppm
1000 ppm, 2500 ppm, 5000 ppm,10000 ppm
10000 ppm, 20000 ppm, 30000 ppm, 40000 ppm, 50000 ppm
Blank, 5 ppm, 10 ppm, 100 ppm, 250 ppm, 500 ppm, 750 ppm, 1000 ppm
1000 ppm, 2500 ppm, 5000 ppm, 10000 ppm
10000 ppm, 20000 ppm, 30000 ppm, 40000 ppm, 50000 ppm
Blank, 5 ppm, 50 ppm, 250 ppm, 500 ppm
Blank, 25 ppm, 100 ppm, 500 ppm, 1000 ppm, 3000 ppm
Blank, 5 ppm, 10 ppm, 25 ppm, 50 ppm
50 ppm, 100 ppm, 250 ppm, 500 ppm, 750 ppm, 1000 ppm
Blank, 300 ppm, 500 ppm, 700 ppm, 1000 ppm
Blank, 1000 ppm, 3000 ppm, 5000 ppm
5000 ppm, 10000 ppm, 15000 ppm, 20000 ppm
20000 ppm, 30000 ppm, 40000 ppm, 50000 ppm
Blank, 300 ppm, 500 ppm, 700 ppm, 1000 ppm, 3000 ppm, 5000 ppm
5000 ppm, 10000 ppm, 15000 ppm, 20000 ppm, 30000 ppm, 40000 ppm,
50000 ppm
Blank, 100 ppm, 300 ppm, 500 ppm, 700 ppm, 1000 ppm
Blank, 50 ppm, 100 ppm, 250 ppm, 300 ppm, 500 ppm
Test method
ASTM D2622
ASTM D2622
ASTM D2622
ASTM D4294
ASTM D4294
ASTM D4294
ASTM D7039
ASTM D7039
ASTM D7220
ASTM D7220
IP 336
IP 336
IP 336
IP 336
IP 336
IP 336
IP 496
IP 497
Pk
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
Packed
8x100 ml
4x100 ml
5x100 ml
8x100 ml
4x100 ml
5x100 ml
5x100 ml
6x100 ml
5x100 ml
6x100 ml
5x100 ml
4x100 ml
4x100 ml
4x100 ml
7x100 ml
7x100 ml
6x100 ml
6x100 ml
Cat. No.
99325.001
99326.001
99327.001
99328.001
99329.001
99330.001
99331.001
99332.001
99333.001
99334.001
99335.001
99336.001
99337.001
99338.001
99339.001
99340.001
99341.001
99342.001
46 VWR ® for calibration | vwr.com
ORGANIC TRACE ANALYSIS
ORGANIC REFERENCE STANDARDS
Organic standards, typically used as a reference material for gas chromatography, across a wide range of applications.
Substance
Aroclor 1260 (PCB-mixture, 60% chlorinated)
Aroclor 1242 (PCB-mixture, 42% chlorinated)
Benzo[a]pyrene
Benzene
Bromomethane
Chloroethylene
Chloroethane
Chlorpyrifos
Diazinon
Concentration
35 μg/ml in isooctane
1,000 μg/ml in hexane
50 μg/ml in toluene
200 μg/ml in methanol
200 μg/ml in methanol
200 μg/ml in methanol
200 μg/ml in methanol
100 μg/ml in methanol
100 μg/ml in methanol
1
1
1
1
1
1
1
1
1
Pk (ml) Cat. No.
122732H
122792T
122932N
123152U
123472K
123462Y
123482M
123692U
123972C
Substance Concentration
1
Pk (ml)
100 Imidazole
Malathion (1,2-Bis(ethoxycarbonyl) ethyl O,O-dimethyl phosphorodithioate)
Morpholine
Stearyl stearate
1000 mg/ml in water
100 μg/ml in methanol
1000 mg/l in aqueous solution for ion chromatography
1
2,000 μg/ml in hexane
500
5×1
10×1
1×10
1×1
Cat. No.
87345.290
87345.180
124312W
87732.260
87496.005
87496.010
87496.011
87496.030
PESTINORM® CRM for GC.
Description
1,2,3,4-Tetrahydronaphthalene, PESTINORM ® min. 99,0%
1,2-Dichloroethane, PESTINORM ® min. 99,5%
1,4-Dioxane, PESTINORM ® min. 99,0%
1-Butanol, PESTINORM ® min. 99,0%
1-Methyl-2-Pyrrolidone, PESTINORM ® min. 99,0%
1-Propanol, PESTINORM ® min. 99,5%
2-Butanol, PESTINORM ® min. 99,0%
2-Methylbutane, PESTINORM ® min. 97,0%
2-Propanol, PESTINORM ® min. 99,5%
3-Methylheptane, PESTINORM ® min. 97,0%
3-Methylhexane, PESTINORM ® min. 95,0%
4-Methyl-2-pentanone, PESTINORM ® min. 99,5%
Acetone, PESTINORM ® min 99,9%
Acetonitrile, PESTINORM ® min 99,9% n-Amylalcohol, PESTINORM ® min. 99,0%
Anisole, PESTINORM ® min. 99,0%
Benzene, PESTINORM ® min. 99,5% n-Butylacetate, PESTINORM ® min. 99,0%
Chlorobenzene, PESTINORM ® min. 98,0%
Chloroform, PESTINORM ® min. 99,5%
Cyclohexane, PESTINORM ® min. 99,5%
GAS CHROMATOGRAPHY (GC) CERTIFIED REFERENCE
STANDARDS (CRMs), PESTINORM ®
Due to its excellent separation capacity and its high sensitivity gas chromatography is a widely used technique for analytical purposes. In order to get proper identification and quantification results of the analysed compounds, reference standards are needed. These PESTINORM ® reference substances can be used for the characterisation of GC column properties. In addition they may also be used for the identification of unknown compounds in a gas chromatogram or as standards in quantitative GC analysis.
– All products are CRM acc ISO/IEC 17025 and ISO 17034
– All products supplied with a Certificate of Analysis and batchspecific chromatogram
– Assay typically min 99,0% in many cases over 99.5%
– 24 month shelf life
Intended uses:
– For calibration of TLC, GC-FID, GC-TCD, GC-ECD, GC-MS,
GC-MS-MS, LC-UV, LC-MS and LC-MS-MS
– Validation of analytical methods
– Preparation of 'working reference samples'
– Detection limit and linearity studies
CAS No.
119-64-2
107-06-2
123-91-1
71-36-3
872-50-4
71-23-8
78-92-2
78-78-4
67-63-0
589-81-1
589-34-4
108-10-1
67-64-1
75-05-8
71-41-0
100-66-3
71-43-2
123-86-4
108-90-7
67-66-3
110-82-7
Pack type
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Pk
5 ml
5 g
5 ml
5 ml
5 ml
5 ml
5 ml
1 ml
5 ml
250 mg
5 ml
5 ml
5 ml
5 ml
5 ml
5 g
5 ml
5 ml
5 ml
5 ml
5 ml
Cat. No.
91070.050
91049.050
91009.050
91061.050
91030.050
91037.050
91062.050
91020.010
91038.050
91022.001
91023.050
91056.050
91046.050
91047.050
91059.050
91060.050
91000.050
91001.050
91063.050
91003.050
91004.050
vwr.com | VWR ® for calibration 47
ORGANIC TRACE ANALYSIS
Description
Cyclohexanol, PESTINORM ® min. 99,0%
Cyclohexanone, PESTINORM ® min. 99,0%
Cyclopentane, PESTINORM ® min. 98,0%
D-Camphor, PESTINORM ® min. 98,0% n-Decane, PESTINORM ® min. 99,0%
Dichloromethane, PESTINORM ® min. 99,9%
Diethylether, PESTINORM ® min. 99,5%
N,N-Dimethylacetamide, PESTINORM ® min. 99,0%
Dimethylformamide, PESTINORM ® min. 99,5%
Dimethylsulphoxide, PESTINORM ® min. 99,5% n-Dodecane, PESTINORM ® min. 99,0%
Ethylacetate, PESTINORM ® min. 99,5%
Ethylbenzene, PESTINORM ® min 99,5%
Ethyleneglycol monoethylether, PESTINORM
Ethylmethylketone, PESTINORM ® min. 99,0%
® min. 99,0% n-Heptadecane, PESTINORM ® min. 99,0% n-Heptane, PESTINORM ® min. 99,5% n-Hexadecane, PESTINORM ® min. 99,0%
Hexamethyldisiloxane, PESTINORM ® min. 99,0% n-Hexane, PESTINORM ® min. 99,5%
Isobutanol, PESTINORM ® min. 99,0%
Isobutylacetate, PESTINORM ® min. 99,0%
Isooctane, PESTINORM ® min. 99,9%
Isopropylether, PESTINORM ® min. 99,0%
Methanol, PESTINORM ® min. 99,5%
Methylacetate, PESTINORM ® min. 99,0%
Methyl-tert.butylether, PESTINORM ® min. 99,8% n-Nonane, PESTINORM ® min. 99,0% n-Octadecane, PESTINORM ® min. 99,0% n-Octane, PESTINORM ® min. 99,0% n-Pentadecane, PESTINORM ® min. 99,0% n-Pentane, PESTINORM ® min. 97,0%
Pyridine, PESTINORM ® min. 99,0% n-Tetradecane, PESTINORM ® min. 99,0%
Tetrahydrofuran, PESTINORM ® min. 99,7%
Toluene, PESTINORM ® min. 99,5% n-Tridecane, PESTINORM ® min. 99,0% n-Undecane, PESTINORM ® min. 99,0% o-Xylene, PESTINORM ® min. 98,0% m-Xylene, PESTINORM ® min. 99,0% p-Xylene, PESTINORM ® min. 99,0%
Xylene, PESTINORM ® min. 99,0%
Description
Fatty Acid Methyl Esters (FAME) standards for GC, PESTINORM ®
Methyloctanoate, PESTINORM ® , min. 99,0%
Methyldecanoate, PESTINORM ® , min. 99,0%
Methyllaurate, PESTINORM ® , min. 99,0%
Methylmyristate, PESTINORM ® , min. 98,0%
Methylmargarate, PESTINORM ® , min. 98,0%
Methylstearate, PESTINORM ® , min. 99,0%
Methyloleate, PESTINORM ® , min. 99,0%
Methyl linoleate, PESTINORM ® min. 95,0%
110-54-3
78-83-1
110-19-0
540-84-1
108-20-3
67-56-1
79-20-9
1634-04-4
111-84-2
593-45-3
111-65-9
629-62-9
109-66-0
110-86-1
629-59-4
109-99-9
108-88-3
67-68-5
112-40-3
141-78-6
100-41-4
110-80-5
78-93-3
629-78-7
142-82-5
544-76-3
107-46-0
CAS No.
108-93-0
108-94-1
287-92-3
464-49-3
124-18-5
75-09-2
60-29-7
127-19-5
68-12-2
629-50-5
1120-21-4
95-47-6
108-38-3
106-42-3
1330-20-7
Pack type
Ampoule in a box
Ampoule in a box
Ampoule in a box
Vial in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Vial in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
Ampoule in a box
5 ml
5 ml
5 ml
5 ml
5 g
5 g
5 g
5 ml
Pk
5 ml
5 ml
5 ml
5 ml
5 ml
5 ml
5 ml
5 ml
5 ml
5 ml
5 ml
5 ml
5 ml
5 ml
5 ml
5 ml
5 g
5 ml
5 ml
5 ml
5 ml
5 ml
5 ml
5 ml
5 ml
5 ml
5 ml
5 ml
5 g
5 ml
5 ml
5 ml
5 ml
Pk
5 ml
5 ml
5 ml
5 g
5 ml
5 ml
5 g
5 ml
5 ml
91017.050
91018.050
91019.050
91066.050
91067.050
91058.050
91051.050
91055.050
91068.050
91048.050
91032.050
91033.050
91034.050
91035.050
91036.050
91069.050
91039.050
91057.050
91040.050
91041.050
91042.050
91044.050
91043.050
91045.050
91071.050
Cat. No.
91005.050
91006.050
91007.050
91002.050
91008.050
91050.050
91064.050
91052.050
91053.050
91054.050
91010.050
91012.050
91013.050
91065.050
91014.050
91015.050
91016.050
Cat. No.
91028.050
91021.050
91024.050
91027.050
91026.050
91031.050
91029.050
91025.050
48 VWR ® for calibration | vwr.com
ORGANIC TRACE ANALYSIS
Stearyl stearate solution
STANDARDS FOR THE DETERMINATION OF HYDROCARBON OIL INDEX (HOI)
VWR offers a complete range of products for the determination of the hydrocarbon oil index (HOI) in accordance with EN ISO 9377-2 (DIN H53).
– All standards are CRMs according to ISO 17025 and ISO 17034
– Shelf life of 24 months
– Storage: 2 – 8°C
– Supplied with a detailed, batch-specific certificate of analysis
The Hydrocarbon Oil Index (HOI) is defined as the total amount of compounds which can be extracted from the sample (drinking water, surface water and waste water) with a non-polar solvent having a boiling point between 39°C and 69°C .
In addition, the compounds must not absorb on Florisil® (magnesium sulphate) and must elute between n-decane (C10H24) and n-tetracontane (C40H82) when analyzed by GC using an apolar analytical column.
ISO 17025 / ISO 17034. ISO 9377-2.
Delivered with Certificate of Analysis, reference and batch number of source materials.
Most articles are packaged in glass ampoules. Certan® bottles provide the advantage of a sealed ampoule with the flexibility of a screw cap bottle or a septum vial. These unique, screw-cap sample containers with a 1,2×28 mm height capillary opening are designed for the storage of volatile samples and reference standards.
Description
N-Alkane standard solution, 16 components each 50 mg/l in n-hexane
N-Alkane standard solution, 16 components each 50 mg/l in n-hexane
N-Alkane standard solution, 16 components each 100 mg/l in n-hexane/petroleum ether
N-Alkane standard solution, 16 components each 100 mg/l in n-hexane/petroleum ether
N-Alkane standard solution, 19 components each 50 mg/l in Isooctane
Extraction solvent stock solution, 20 µl/l n-decane and 20 mg/l n-tetracontane in n-hexane
Florisil® quality control standard, 1000 mg/l mineral oil and 1000 mg/l diesel in n-hexane
Standard mixture of mineral oils, 5000 mg/l mineral oil and 5000 mg/l diesel in n-hexane
Standard mixture of mineral oils, 5000 mg/l mineral oil and 5000 mg/l diesel in n-hexane
Standard mixture of mineral oils, 5000 mg/l mineral oil and 5000 mg/l diesel in n-hexane
Standard mixture of mineral oils, 500 mg/l mineral oil and 500 mg/l diesel in acetone
Standard mixture of mineral oils, 500 mg/l mineral oil and 500 mg/l diesel in acetone
Stearyl stearate test solution, 2000 mg/l in n-hexane
Stearyl stearate test solution, 2000 mg/l in n-hexane
Mixture of mineral oils (Diesel Fuel / Lubricating Oil) : 1/1
Mixture of mineral oils (Diesel Fuel / Lubricating Oil) : 1/1
Quality Control Standard of Mineral Oils; 1000mg/l each of Mineral Oil and Diesel Oil in Acetone
Mineral oil standard mixture; 10g/l each of Mineral Oil and Diesel Oil in n-Heptane
Quality Control Standard of Mineral Oils; 10000mg/l each of Mineral Oil and Diesel Oil in n-Hexane
BTEX Standard Solution 6 components (ISO 9377-2-Mod)in Methanol
Pk
1 ml
5 ml
1 KIT
5 ml
5 ml
10 ml
5 ml
5 Vial
10 ml
4,5 ml
1 KIT
10 ml
5
Ampoule
10 ml
1 ml
5 ml
5 ml
10 ml
5 ml
1 ml
Cat. No.
88391.001
88391.005
87499.005
87499.006
88392.005
88393.011
88394.005
87495.005
87495.011
87502.002
88378.005
88378.011
87496.005
87496.011
88418.001
88418.005
88419.005
88420.011
88421.005
88422.001
vwr.com | VWR ® for calibration 49
ORGANIC TRACE ANALYSIS
Supplied in 100 ml packs
Standard for GC
1,2-Dichloroethane
1,4-Dioxan
1-Propanol
2,2,4-Trimethylpentane
2-Propanol
Acetone
Acetonitrile
Butyl acetate
Cyclohexane
Dichloromethane (DCM)
Di-iso- propyl ether
Dimethylsulphoxide (DMSO)
SECONDARY REFERENCE STANDARDS FOR GAS
CHROMATOGRAPHY, PESTINORM ®
Avantor offers a wide range of secondary GC solvent reference standards for various chromatographic and analytical applications.
‒ Purity and the specific impurity profile is determined by GC-MS and reported in the
Certificate of Analysis
‒ Traceability data to specific current lot of primary standard
‒ Completely synthetic and typically over 99,9% pure by GC-FID
Assay values are reported by mass balance according to ISO/IEC 17025 which allows the secondary standard to be used as reference material for qualitative or quantitative use.
The FDA, USP and EP all recognise the use of secondary standards and working standards that are established with reference to the corresponding primary standard.
PESTINORM ® secondary GC standards provide a convenient and cost effective alternative to Pharmacopoeia primary standards, and allow laboratories to focus resources on their core activities rather than preparing internal working standards.
These standards are traceable to the current lots of USP, and if available to Ph. Eur.
Certificates of Analysis will show the analytical methods for determining the purity and assay, together with the handling and storage conditions and manufacturing plus expiry dates.
Cat. No.
85657.180
85664.180
85675.180
85674.180
85676.180
85653.180
85654.180
85655.180
85656.180
85658.180
85659.180
85663.180
Standard for GC
Ethanol
Ethyl acetate iso-Butyl methyl ketone
Methanol
N,N-Dimethylacetamide
N,N-Dimethylformamide n-Heptane n-Hexane tert-Butyl methyl ether
Tetrahydrofuran (THF)
Toluene
Cat. No.
85665.180
85666.180
85673.180
85670.180
85661.180
85662.180
85667.180
85668.180
85671.180
85677.180
85678.180
MORE
DETAILS
VWR Chemicals
PESTINORM ® solvents
A complete range of solvents for detection of trace organic substances in the environment. The range offers extremely low halogenated and other organic compounds to prevent sample contamination.
‒ High quality guaranteed, specifically for use in pesticide analysis
‒ Filtered at 0,2 μm, bottled under nitrogen, fitted with caps which have
PTFE liners to prevent contamination
‒ Evaporation residue less than 5 ppm (<3 ppm for SUPRA TRACE grade)
50 VWR ® for calibration | vwr.com
PB20066-EN
ORGANIC TRACE ANALYSIS
RESIDUAL SOLVENT STANDARDS ACCORDING TO ICH GUIDELINES
The level of volatile organic solvents in pharmaceutical raw materials or finished product is defined and monitored in accordance with ICH guidelines. Residual solvents are classified according to their risk assessment as Class 1, Class 2 or Class 3.
A selection of residual solvent standards is now available from Avantor.
‒ Conforms to the latest Ph. Eur. edition
‒ Conforms to ICH guidelines
‒ Delivered with comprehensive Certificate of Analysis
‒ Packed in 1 or 1,5 ml glass ampoules
Residual solvent standards according to lCH guidelines
Residual Solvents Class 3 acc. to Ph Eur Ver 10 and USP 467 MIX A: 23 components; 5000 mg/L each of n-Heptane; Acetone; Acetic acid-isobutyl ester; Anisole; Acetic acid-isopropyl ester; 1-Butanol; Methyl acetate; 2-Butanol; Isoamyl alcohol; n-Butylacetate; 2-Butanone;
Methyl-tert.butylether; 2-Methyl-1-propanol; Dimethylsulfoxide; n-Pentane; Ethanol;
1-Pentanol; Ethyl Acetate; 1-Propanol; Diethylether; 2- Propanol; Ethyl formate; Acetic acid n-propyl ester in Dimethylformamide
Residual Solvents Class 3 acc. to Ph Eur Ver 10 and USP 467 MIX B: 2 components; 5000 mg/L each of Acetic acid and Formic acid in Dimethylformamide
Residual Solvents Class 3 acc. to Ph Eur Ver 10 and USP 467 MIX C: Triethylamine 5000 mg/L in Water
Residual solvents (0861): Class 3 acc. to Ph Ch MIX A: 25 components: 5000 mg/L each of
Acetone; Anisole; 1-Butanol; 2-Butanol; 2-Butanone; n-Butylacetate; Diethylether; Dimethyl sulphoxide; Ethanol; Ethyl Acetate; Ethyl formate; n-Heptane; 2-Methyl-1-propanol; Acetic acid-isobutyl ester; Acetic acid-isopropyl ester; Methyl acetate; Isoamyl alcohol; 4-Methyl-
2-pentanone; Methyl-tert.butylether; n-Pentane; 1-Pentanol; 1-Propanol; 2- Propanol; Acetic acid n-propyl ester; Isopropylbenzene in Dimethylformamide
Residual solvents (0861): Class 3 acc. to Ph Ch MIX B: 2 components: 5000 mg/L each of
Acetic acid and Formic acid in Dimethylformamide
Residual Solvents Class 2 acc. to Ph Eur Ver 10 MIX A: 14 components: Chlorobenzene
360 mg/L; Cyclohexane 3880 mg/L; cis-1,2-Dichloroethene 1870 mg/L; Dichloromethane
600 mg/L; Ethylbenzene 369 mg/L; n-Hexane 290 mg/L; Methylcyclohexane 1180 mg/L;
N,N - Dimethylformamide 880 mg/L; Toluene 890 mg/L; 1,1,2-Trichloroethene 80 mg/L; m-Xylene 1302 mg/L; o-Xylene 195 mg/L; p-Xylene 304 mg/L; Tetrahydrofuran 720 mg/L in
Dimethylsulphoxide
Residual Solvents Class 2 acc. to Ph Eur Ver 10 MIX A: 13 components: Chlorobenzene 360 mg/L; Cyclohexane 3880 mg/L; cis-1,2-Dichloroethene 1870 mg/L; Dichloromethane 600 mg/L; N,N Dimethylformamide 880 mg/L; Ethylbenzene 369 mg/L; n-Hexane 290 mg/L;
Methylcyclohexane 1180 mg/L; Toluene 890 mg/L; 1,1,2-Trichloroethene 80 mg/L; m-Xylene
1302 mg/L; o-Xylene 195 mg/L; p-Xylene 304 mg/L in Dimethylsulfoxide
Pk(ml)
1 ml
1 ml
1 ml
1 ml
1 ml
1 ml
1 ml
1.5 ml
Residual Solvents Class 2 acc. to Ph Eur Ver 10 MIX B: 10 components; Acetonitrile 410 mg/L; Chloroform 60 mg/L; 1,2-Dimethoxyethane 100 mg/L; N,N-Dimethylacetamide 1090 mg/L; Dioxan 380 mg/L; 2-Hexanone 50 mg/L; Methanol 3000 mg/L; Nitromethane 50 mg/L; Pyridine 200 mg/L; 1,2,3,4-Tetrahydronaphthalene 100 mg/L in Dimethylsulfoxide /
Water ( 9 /
1
)
Residual Solvents Class 2 acc. to Ph Eur Ver 10 MIX B: 11 components; Acetonitrile 410 mg/L;
Chloroform 60 mg/L; 1,2-Dimethoxyethane 100 mg/L; N,N-Dimethylacetamide 1090 mg/L;
Dioxan 380 mg/L; 2-Hexanone 50 mg/L; Methanol 3000 mg/L; Nitromethane 50 mg/L;
Pyridine 200 mg/L; 1,2,3,4-Tetrahydronaphthalene 100 mg/L; Isopropylbenzene 70 mg/L in
Dimethylsulfoxide / Water ( 9 /
1
)
Residual Solvents Class 2 acc. to Ph Eur Ver 10 Mix C: 7 components; 2-Ethoxyethanol
1 ml
1.5 ml
1 ml
160 mg/L; Ethylene glycol 620 mg/L; Formamide 220 mg/L; 2-Methoxyethanol 50 mg/L;
N-Methyl Pyrrolidone 530 mg/L; Sulfolan 160 mg/L; 4-Methyl-2-pentanone 4500 mg/L in
Water
"Residual Solvents Class 2 acc to Ph Eur Ver 8.8 MIX C: 6 components
1 ml
2-Ethoxyethanol 160 mg/L; Ethyleneglycol 620 mg/L; Formamide 220 mg/L;
2-Methoxyethanol 50 mg/L; 1-Methyl-2-pyrrolidon 4840 mg/L; Sulfolan 160 mg/L in Water" 1 ml
Residual Solvents Class 2 acc. to Ph Eur Ver 10 Mix C: 6 components; 2-Ethoxyethanol
160 mg/L; Ethylene glycol 620 mg/L; Formamide 220 mg/L; 2-Methoxyethanol 50 mg/L;
N-Methyl Pyrrolidone 4840 mg/L; Sulfolan 160 mg/L in Water
Residual Solvents Class 1 acc. to Ph Eur Ver 10: 5 components; Benzene 2 mg/L;
Carbon tetrachloride 4 mg/L; 1,2-Dichloroethane 5 mg/L; 1,1-Dichloroethene 8 mg/L;
1,1,1-Trichloroethane 1500 mg/L in Dimethylsulfoxide
Residual Solvents Class 1 acc to Ph Eur Ver 8.8: 5 components; Benzene 4 mg/L;
1,2-Dichloroethane 10 mg/L; Tetrachloromethane 8 mg/L; 1,1-Dichloroethene 16 mg/L;
1,1,1-Trichloroethane 20 mg/L in Dimethylsulfoxide
Residual Solvents Class 1 acc to Ph Eur Ver 8.8: 5 components; Benzene 2 mg/L;
1,2-Dichloroethane 5 mg/L; Tetrachloromethane 4 mg/L; 1,1-Dichloroethene 8 mg/L;
1,1,1-Trichloroethane 10 mg/L in Dimethylsulfoxide
1 ml
1.5 ml
1 ml
1 ml
1 ml
1.5 ml
Cat. No.
88210.001
88211.001
88213.001
88220.001
88221.001
88216.001
88207.001
88207.015
88208.001
88208.015
88217.001
88218.001
88219.001
88209.001
88209.015
88214.001
88215.001
88206.001
88206.015
vwr.com | VWR ® for calibration 51
ORGANIC TRACE ANALYSIS
Description
Methyl valerate, PESTINORM ® , min. 99,0%
Methyl valerate, PESTINORM ® , min. 99,0%
Methyl hexanoate, PESTINORM ® , min. 98,0%
Methyl hexanoate, PESTINORM ® , min. 98,0%
Methyl heptanoate, PESTINORM ® , min. 97,0%
Methyl heptanoate, PESTINORM ® , min. 97,0%
Methyloctanoate, PESTINORM ® , min. 99,0%
Methyloctanoate, PESTINORM ® , min. 99,0%
Methyl nonanoate, PESTINORM ® , min. 96,0%
Methyl nonanoate, PESTINORM ® , min. 96,0%
Methyldecanoate, PESTINORM ® , min. 99,0%
Methyldecanoate, PESTINORM ® , min. 99,0%
Methyl undecanoate, PESTINORM ® , min. 98,0%
Methyl undecanoate, PESTINORM ® , min. 98,0%
Methyllaurate, PESTINORM ® , min. 99,0%
Methyllaurate, PESTINORM ® , min. 99,0%
Methyl tridecanoate, PESTINORM ® , min. 98,0%
Methyl tridecanoate, PESTINORM ® , min. 98,0%
Methylmyristate, PESTINORM ® , min. 98,0%
Methylmyristate, PESTINORM ® , min. 98,0%
Methyl pentadecanoate, PESTINORM ® , min. 98,0%
Methyl pentadecanoate, PESTINORM ® , min. 98,0%
Methyl palmitate, PESTINORM ® , min. 97,0%
Methyl palmitate, PESTINORM ® , min. 97,0%
Methyl palmitate, PESTINORM ® , min. 97,0%
Methylmargarate, PESTINORM ® , min. 98,0%
Methylmargarate, PESTINORM ® , min. 98,0%
Methylstearate, PESTINORM ® , min. 99,0%
Methylstearate, PESTINORM ® , min. 99,0%
Methyloleate, PESTINORM ® , min. 99,0%
124-10-7
7132-64-1
7132-64-1
1731-88-0
1731-88-0
1731-88-0
1731-92-6
1731-92-6
112-61-8
112-61-8
112-62-9
Methyloleate, PESTINORM ® , min. 99,0%
Methyloleate, PESTINORM ® , min. 99,0%
Methyl linoleate, PESTINORM ® min. 95,0%
Methyl nonadecanoate, PESTINORM ® , min. 98,0%
112-62-9
112-62-9
112-63-0
1731-94-8
Methyl nonadecanoate, PESTINORM ® , min. 98,0%
Methyl nonadecanoate, PESTINORM ® , min. 98,0%
Methyl arachidate, PESTINORM ® , min. 98,0%
Methyl arachidate, PESTINORM ® , min. 98,0%
1731-94-8
1731-94-8
1120-28-1
1120-28-1
Methyl arachidate, PESTINORM ® , min. 98,0% 1120-28-1
Methyl cis-11-eicosenoate, PESTINORM ® , min. 99,0% 2390-09-2
Methyl behenate, PESTINORM ® , min. 90,0%
Methyl behenate, PESTINORM ® , min. 90,0%
Methyl behenate, PESTINORM ® , min. 90,0%
Methyl tetracosanoate, PESTINORM ® , min. 98,0%
Methyl tetracosanoate, PESTINORM ® , min. 98,0%
Methyl tetracosanoate, PESTINORM ® , min. 98,0%
1731-84-6
110-42-9
110-42-9
1731-86-8
1731-86-8
111-82-0
111-82-0
1731-88-0
1731-88-0
124-10-7
CAS No.
624-24-8
624-24-8
106-70-7
106-70-7
106-73-0
106-73-0
111-11-5
111-11-5
1731-84-6
929-77-1
929-77-1
929-77-1
2442-49-1
2442-49-1
2442-49-1
FATTY ACID METHYL ESTERS (FAME) STANDARDS FOR GC, PESTINORM ®
Avantor offers an extensive range of FAME standards as Certified
Reference Materials under the well known PESTINORM ® brand.
– All products are CRM acc ISO/IEC 17025 and ISO 17034
– All products are NEAT
– 24 month shelf life
Esterification of fatty acids is an important tool to determine content and characterise fats and oils in food, especially for measurement by GC methods. The simple derivatisation to create the methyl ester analogue is also used widely as a preliminary technique for assessing the quality and purity of biofuels. Avantor offers a comprehensive range of fatty acid methyl esters (FAME) Certified Reference
Materials for calibration of GC instruments, for validation of analytical methods, preparation of 'working reference samples' or for detection limit and linearity studies.
ISO 17025 / 17034
Ampoule
Ampoule
Ampoule
Vial
Ampoule
Ampoule
Vial
Ampoule
Ampoule
Vial
Ampoule
Ampoule
Ampoule
Vial
Ampoule
Ampoule
Vial
Ampoule
Vial
Vial
Vial
Ampoule
Ampoule
Ampoule
Ampoule
Ampoule
Ampoule
Ampoule
Ampoule
Ampoule
Ampoule
Pack type
Ampoule
Ampoule
Ampoule
Ampoule
Ampoule
Ampoule
Ampoule
Ampoule
Ampoule
Vial
Ampoule
Ampoule
Vial
Vial
Ampoule
91024.050
91080.010
91080.050
91027.010
91027.050
91082.010
91082.050
91083.002
91083.010
91083.050
91026.001
91026.050
91031.050
91031.010
91029.001
91029.010
91029.050
91025.050
91087.002
91087.010
91087.050
91088.001
91088.010
91088.050
91089.001
91090.001
91090.010
91090.050
91091.001
91091.002
91091.010
Cat. No.
91072.010
91072.050
91073.010
91073.050
91074.010
91074.050
91028.010
91028.050
91076.010
91076.050
91021.010
91021.050
91078.010
91078.050
91024.010
1 g
5 g
5 ml
250 mg
1 g
5 g
100 mg
1 g
5 g
100 mg
5 ml
1 ml
5 ml
250 mg
1 g
5 g
100 mg
5 g
5 g
1 ml
100 mg
5 g
1 ml
5 ml
1 g
5 g
1 ml
5 ml
1 g
5 g
1 ml
Pk
1 ml
5 ml
1 ml
5 ml
1 ml
5 ml
1 ml
5 ml
1 g
100 mg
1 g
5 g
100 mg
250 mg
1 g
52 VWR ® for calibration | vwr.com
WATER MONITORING
COD calibration standards.
COD CALIBRATION STANDARDS, CERTIFIED REFERENCE MATERIALS (CRMs)
Avantor now offers a complete range of COD (Chemical Oxygen Demand) calibration standards (traceable to BAM) as CRM with concentrations between 20 and
10000 mg/L. Can be used to calibrate, control, verify or validate all COD test methods.
– Traceable to BAM
– Supplied with a detailed Certificate of Analysis
– Complete range from 10 to 10000 mg/L
– Customised COD standards available on request
–
– Storage at 2 to 8 °C
–
Shelf life of 24 months / shelf life after opening: 1 month
Convenient pack size in 100 and 500 ml
COD is defined as the amount of oxygen equivalents consumed in the chemical oxidation of organic matter by strong oxidant
(e.g., potassium dichromate) to carbon dioxide.
COD is often used as a measurement of pollutants in water, wastewater, and aqueous hazardous wastes.
The traditional chemical oxygen demand (COD) analysis method is the wet chemistry method. This involves a 2 hour digestion at high heat under acidic conditions in which potassium dichromate acts as the oxidant for any organic material present in a water sample. Silver sulphate is present as the catalyst and mercuric sulphate acts to complex out any interfering chloride. Following digestion, the extent of oxidation is measured through indirect measurement of oxygen demand via electrons consumed in the reduction of Cr⁶⁺ to Cr³⁺. This can be done by titration or spectrophotometry. Colorimetric measurement of COD is faster and easier method to perform than titrimetric analysis and does not require additional reagents.
COD is expressed in mg/L, which indicates the mass of oxygen consumed per liter of solution.
To ensure the lowest possible uncertainty levels COD calibration standards certified values are obtained by a weighted mean of the results of two independent calibration methods: Classical Volumetric and Instrumental (digestion of the chemically bonded organic carbon in the presence of a chemical oxidant and subsequent absorption measurement at 430 nm, using a spectrophotometer).
Certified Reference Materials acc. ISO 17025 and ISO 17034
Description
COD calibration standard
COD calibration standard
COD calibration standard
COD calibration standard
COD calibration standard
COD calibration standard
COD calibration standard
COD calibration standard
COD calibration standard
COD calibration standard
COD calibration standard
COD calibration standard
COD calibration standard
COD calibration standard
COD calibration standard
COD calibration standard
COD calibration standard
COD calibration standard
Concentration
20 mg/L
20 mg/L
50 mg/L
50 mg/L
100 mg/L
100 mg/L
200 mg/L
200 mg/L
400 mg/L
400 mg/L
500 mg/L
500 mg/L
1000 mg/L
1000 mg/L
2000 mg/L
2000 mg/L
10000 mg/L
10000 mg/L
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
Pk
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
Cat. No.
88406.180
88406.260
88407.180
88407.260
88408.180
88408.260
88409.180
88409.260
88410.180
88410.260
88411.180
88411.260
88412.180
88412.260
88413.180
88413.260
88414.180
88414.260
vwr.com | VWR ® for calibration 53
WATER MONITORING
COD CALIBRATION STANDARDS
These standards are ideal to use as control standards for COD (Chemical Oxygen
Demand) measurements to verify that correct analysis for COD has taken place.
Achieving an acceptable result for the control standard will improve confidence in sample readings for this important environmental parameter. Available in
500 ml packs.
Description
COD calibration standard 10 mg/L solution
COD calibration standard 20 mg/L solution
COD calibration standard 50 mg/L solution
COD calibration standard 100 mg/L solution
COD calibration standard 200 mg/L solution
COD calibration standard 500 mg/L solution
COD calibration standard 600 mg/L solution
COD calibration standard 1000 mg/L solution
COD calibration standard 1300 mg/L solution
COD calibration standard 1500 mg/L solution
COD calibration standard 2000 mg/L solution
COD calibration standard 5000 mg/L solution
COD calibration standard 6000 mg/L solution
COD calibration standard 10 000 mg/L solution
COD calibration standard 20 000 mg/L solution
COD calibration standard 30 000 ppm solution
COD calibration standard 60 000 mg/L solution
Pack type
Plastic bottles
Plastic bottles
Plastic bottles
Plastic bottles
Plastic bottles
Plastic bottles
Plastic bottles
Plastic bottles
Plastic bottles
Plastic bottles
Plastic bottles
Plastic bottles
Plastic bottles
Plastic bottles
Plastic bottles
Plastic bottles
Plastic bottles
Pk
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
500 ml
Cat. No.
85050.260
85053.260
85063.260
85059.260
85062.260
85064.260
85066.260
85060.260
85051.260
85052.260
85054.260
85065.260
85057.260
85061.260
85055.260
85056.260
85058.260
Description
TIC standard solution
TIC standard solution
TIC standard solution
TIC standard solution
TOTAL INORGANIC CARBON (TIC) STANDARDS
Standard solutions of sodium carbonate.
1000 mg/L sodium carbonate solution according to EN 1484.
Manufacturer quality system is ISO 9001 certified.
Accredited according to ISO/IEC 17025 - Testing and to ISO 17034.
Concentration
1000 mg/L
1000 mg/L
10000 mg/L
10000 mg/L
Pk
100 ml
500 ml
100 ml
500 ml
Cat. No.
88248.180
88248.260
88249.180
88249.260
54 VWR ® for calibration | vwr.com
WATER MONITORING
TOC standard solutions
Description
TOC standard solution 5 mg/L
TOC standard solution 5 mg/L
TOC standard solution 10 mg/L
TOC standard solution 10 mg/L
TOC standard solution 25 mg/L as potassium hydrogen phthalate.
TOC standard solution 50 mg/L
TOC standard solution 50 mg/L
TOC standard solution 100 mg/L (standard solution acc. to EN 1484)
TOC standard solution 100 mg/L (standard solution acc. to EN 1484)
TOC standard solution 200 mg/L
TOC standard solution 200 mg/L
TOC standard solution 500 mg/L
TOC standard solution 500 mg/L
TOC standard solution 1000 mg/L (stock solution acc. to EN 1484)
TOC standard solution 1000 mg/L (stock solution acc. to EN 1484)
TOC standard solution 2000 mg/L
TOC standard solution 2000 mg/L
TOC STANDARD SOLUTIONS
Potassium hydrogen phthalate solutions.
– Broad range of the most relevant standards from 5 to 2000 mg/L
– Excellent quality
– Ease of use
– Reliable results
VWR TOC standards were developed for a broad and routine set of applications. They can be used on a wide variety of instruments including where instrument-specific standards are not required.
Total organic carbon (TOC) is the amount of carbon found in an organic compound.
It is often used as a non specific indicator both for water quality and cleanliness of pharmaceutical manufacturing equipment.
TOC may also refer to the amount of organic carbon in soil, or in a geological formation.
TOC analysis acc. to EN 1484-H3.
This EU standard has been implemented for the analysis of TOC (replacing DIN
38409-H3). It regulates and provides guidelines for the determination of total organic carbon (TOC) in different types of water (drinking, waste, ground, surface or lake). Our
VWR TOC standards acc. to EN 1484 are especially designed for the easy calibration of TOC instruments according to this EU standard and to guarantee reliable analytical results.
Accredited according to ISO 17034, ISO 17025. ISO 9001 certified.
Store under normal laboratory conditions, at temperatures between 15 to 25 °C.
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
Pack size
100 ml
500 ml
100 ml
500 ml
100 ml
100 ml
500 ml
Cat. No.
88223.180
88223.260
88224.180
88224.260
88229.180
88225.180
88225.260
88226.180
88226.260
88227.180
88227.260
88228.180
88228.260
88222.180
88222.260
88230.180
88230.260
vwr.com | VWR ® for calibration 55
WATER MONITORING
TURBIDITY STANDARDS
Turbidity standards in kit form or alternatively as formazine stock solutions which allows users to create their own defined standards.
‒ Set of standards designed for use with turbidity meters with a measuring range from 0,01 to 1100 NTU
‒ Ideal for units that measure scattered light at an angle of 90°, as stipulated in
EN ISO 7027
‒ Kit supplied in handy case
Description
Set of turbidity standards TSK (<0,1; 20; 200; 800 NTU)
Formazine stock solution, 4000 NTU
Formazine stock solution, 4000 NTU
Pk
1 KIT
100 ml
250 ml
INNOVATIONS - visit vwr.com
and search Cat. No. 88231.180
to learn about formazin turbidity standards.
Cat. No.
84209.600
84210.180
84211.230
Turbidity standard, Formazin, 1000 NTU
Description
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
Turbidity Standard
200 NTU
200 NTU
500 NTU
500 NTU
750 NTU
750 NTU
800 NTU
800 NTU
1000 NTU
1000 NTU
2000 NTU
2000 NTU
4000 NTU
4000 NTU
Turbidity
1 NTU
1 NTU
5 NTU
5 NTU
10 NTU
10 NTU
15 NTU
15 NTU
20 NTU
20 NTU
50 NTU
50 NTU
100 NTU
100 NTU
TURBIDITY STANDARDS CRMs, FORMAZIN
All turbidity standard solutions are Certified Reference Materials.
This standard also meets the requirements of the European Pharmacopoeia on a
“2.2.1. Clarity and degree of opalescence of liquids” and ISO 7027-1 “Water quality –
Determination of turbidity – part 1: Quantitative methods».
Produced and calibrated under a quality system that is:
‒ ISO 9001 certified
‒ Accredited according to ISO/IEC 17025 - Testing
‒ Accredited according to ISO 17034 - Reference Material Producer
Formazin
Formazin
Formazin
Formazin
Formazin
Formazin
Formazin
Formazin
Formazin
Formazin
Formazin
Formazin
Formazin
Formazin
Type
Formazin
Formazin
Formazin
Formazin
Formazin
Formazin
Formazin
Formazin
Formazin
Formazin
Formazin
Formazin
Formazin
Formazin
88238.180
88238.270
88240.180
88240.270
88241.180
88241.270
88244.180
88244.270
88245.180
88245.270
88246.180
88246.270
88247.180
88247.270
Cat. No.
88231.180
88231.270
88232.180
88232.270
88233.180
88233.270
88234.180
88234.270
88235.180
88235.270
88236.180
88236.270
88237.180
88237.270
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
Pk
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
100 ml
500 ml
56 VWR ® for calibration | vwr.com
WATER MONITORING
Type
Waste water
QC WW1B
QC WW1B
QC WW2.1
QC WW2.1
QC WW2.2
QC WW2.2
QC WW3
QC WW3
QC WW4
QC WW4
QC WW4A
QC WW4A
QC WW5
QC WW5
QC WW6
QC WW6
Surface and fresh water rivers
QC RW1
QC RW1
QC RW2
QC RW2
Sea water
QC SW3.1
QC SW3.2
QC SW4.1
QC SW4.2
Soil
QC LOAM SOIL B
QC OIL IN SOIL
QC OIL IN SOIL
Sludge
QC ENDOCRDISUP
QC ORGSLUDGE
QC ORGSLUDGE
Drinking and groundwater
QC DW4
QC DW4
QC DWB
QC METALCOMBI
QC METAL HL1
QC METAL HL2
QC METAL LL1
QC METAL LL2
QC METAL LL3
QC METAL LL3A
Description
NO
3
-N 5,0 mg/L, NH
4
-N 1,0 mg/L, PO
4
-P 0,5 mg/L
NO
3
-N 5,0 mg/L, NH
4
-N 1,0 mg/L, PO
4
-P 0,5 mg/L
NH
4
-N 10 mg/L; PO
4
-P (Ortho) 5 mg/L
NH
4
-N 10 mg/L; PO
4
-P (Ortho) 5 mg/L
NO
3
-N 1 mg/L
NO
3
-N 1 mg/L
N (total) 7,5 mg/L; P( total) 1,5 ppm
N (total) 7,5 mg/L; P( total) 1,5 ppm
COD 500 mg/L; TOC 200 mg/L
COD 500 mg/L; TOC 200 mg/L
COD 50 mg/L; TOC 20 mg/L
COD 50 mg/L; TOC 20 mg/L
BOD 200 mg/L
BOD 200 mg/L
Suspended solids 240 mg/L
Suspended solids 240 mg/L
NO
3
-N 100 mg/L; NH
4
-N 100 mg/L; PO
4
-P 100 mg/L
NO
3
-N 100 mg/L; NH
4
-N 100 mg/L; PO
4
-P 100 mg/L
N (total) 250 mg/L; P (total) 200 mg/L)
N (total) 250 mg/L; P (total) 200 mg/L)
NH
4
2 µM; NO
2
1 µM; NO
2
+NO
3
10µM; N (total) 15 µM: Coastal water
PO
4
2 µM; P (total) 2 µM; SiO
4
20 µM: Coastal water
NH
4
2 µM; NO
2
0,2 µM; NO
2
+NO
3
5 µM; N (total) 12 µM: Seawater
PO
4
1 µM; P (total) 1 µM; SiO
4
5 µM: Seawater
As, Pb, Cd, Cr, Cu, Hg, Ni, Zn, K, N (tot), P (tot)
Oil fractions nC₁₀ - C₂₅; nC₂₅ - C₃₅; total carbohydrate, all as mg/kg dry weight
Oil fractions nC₁₀ - C₂₅; nC₂₅ - C₃₅; total carbohydrate, all as mg/kg dry weight
Endocrine disruptors in sludge, including DEHP, NPE, nonylphenol
Organic components: 14xPAH,DEHP, C10-C12LAS, 3xNPE
Organic components: 14xPAH,DEHP, C10-C12LAS, 3xNPE
TOC
TOC
Na, K, Ca, Mg, CI, F, SO
4
, HCO
3
, dry matter, pH, conductivity (K25)
QC METAL LL1, QC METAL LL
2
, QC METAL HL
1
, QC METAL HL
2
Al, Fe, Mn, Pb, Zn mg/L-level
Ag, Ba, Cd, Co, Cr, Cu, Ni, Sr mg/L-level
Al, As, Cr, Cu, Mo, Ni, Sn, V, Zn µg/l-level
Ag, Ba, Cd, Co, Fe, Mn, Pb, Sb, Se, Sr µg/l-level
Hg 5 µg/l
Hg: 0,5 µg/l
CERTIFIED REFERENCE MATERIALS FOR
ENVIRONMENTAL ANALYSIS
Certified Reference Materials (CRMs), produced by VKI, are designed to provide appropriate homogenous stable reference materials for quality control of environmental analyses. Certification is carried out in accordance with ISO guide 30, 31, 33, 34, 35, ISO 5725 and ISO/REMCO N 37. All
CRMs are traceable to a National Standard, or verified by a group of internationally recognised laboratories, and come with a Certificate of Analysis which states the certified value and the uncertainty at a stated level of confidence.
‒ Liquid references supplied in packs of glass ampoules ready for easy dilution
QCRW1-10
QCRW1-50
QCRW2-10
QCRW2-50
QCSW3.1B
QCSW3.2B
QCSW4.1B
QCSW4.2B
QCLOAMSOILB200
QCOILINSOIL100
QCOILINSOIL500
QCENDOCRDISRUP
QCORGSLUD100
QCORGSLUD5X100
QCDW4-10
QCDW4-50
QCDWB
QCMETALCOMBI
QCMETALHL1
QCMETALHL2
QCMETALLL1
QCMETALLL2
QCMETALLL3
QCMETALLL3A
Cat. No.
QCWW1B-10
QCWW1B-50
QCWW2.1-10
QCWW2.1-50
QCWW2.2-10
QCWW2.2-50
QCWW3-10
QCWW3-50
QCWW4-10
QCWW4-50
QCWW4A-10
QCWW4A-50
QCWW5-10
QCWW5-50
QCWW6-10
QCWW6-50
Pk
50
10
50
10
50
50
10
50
10
10
50
10
50
10
50
10
10
50
10
50
10
10
10
10
200 g
100 g
500 g
100 g
100 g
500 g
1
1
1
1
1
1
4
10
50
10 KIT
vwr.com | VWR ® for calibration 57
Avantor Services
Equipment Services
Keep your laboratory in compliance and in operation
Providing a carefree equipment lifecycle with Avantor Services
—
—
—
—
—
—
—
Installation
Preventive maintenance
Warranty and repair
Calibration
Qualification, validation and certification (IQ/OQ/PQ)
Equipment management
Training
VWR.COM/
EIS
©2020 VWR
58 VWR ® for calibration | vwr.com
PB18028-EN
CALIBRATION TOOLS
LIGHT METER, DUAL-DISPLAY, TRACEABLE ®
Dual-displays show lux or foot-candles, or percent differential from a reference point, and the selected light source (daylight, tungsten, fluorescent, or mercury). Traceable ® light meter has computer output that allows it to be connected to a computer or data logger for monitoring and keeping results. To ensure accuracy an individually serial numbered Traceable ® certificate is provided from ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National
Institute of Standards and Technology).
‒ Two displays show lux or foot-candles
‒ Computer output
‒ Data hold button 'freezes' the display
Readings in lux and foot-candles: Dual-display meter measures lux in three ranges: 0 to 1999 (1 lux resolution), 2000 to 19990 (10 lux resolution), and 20000 to 50000 (100 lux resolution). Readings in foot-candles: 0 to 199,9 (0,1 Fc resolution), 200 to 1999 (1
Fc resolution), 2000 to 5000 (10 Fc resolution). Unit has zero reference settings for all light sources.
Monitor and store results: Data hold button freezes the display to capture readings.
Precise photodiode and colour-correction filter provide cosine- and colour-corrected measurements.
Supplied with round photocell, Traceable ® certificate, 9 volt alkaline battery, and computer output.
Accuracy
Display
Resolution
Weight (g)
W×D×H (mm)
±4,5%
LCD
1 lux/10 lux/100 lux or 0,1 Fc/1Fc/10Fc
240
76×32×178
Description
Dual-display light meter, Traceable ® 1
Pk Cat. No.
662-0940
ROOM CLIMATE MONITOR, AM 100
This device measures and displays the air temperature and humidity as well as CO
2 concentration, simultaneously.
‒ Three different LEDs (green, yellow, red) indicate the CO
2
value in the air as good, medium or bad
‒ Acoustic alarm when CO
2
limit is exceeded
‒ Helps to improve room climate and prevent mould formation
‒ Large LCD with backlight for easy reading in the dark
‒ MUTE button for alarm on/off
‒ For bench top or wall mounting
This smart, compact and easy to use device was designed to help people taking care of Indoor Air Quality. The AM 100 can be widely used in office buildings, schools, exhibition halls, shopping malls, meeting rooms, fitness centres, restaurants and other public places where personal comfort and a healthy environment is important.
Supplied with AC/DC adapter and factory calibration certificate.
Description
Room climate monitor, AM 100
Range ()
0...+50 °C / 20 - 90% RH / 0 - 3000 ppm (CO
2
)
Weight (g)
200 1
Pk Cat. No.
620-2624
vwr.com | VWR ® for calibration 59
CALIBRATION TOOLS
DIGITAL CALIPERS
Made from stainless steel. Battery life is about 10 000 hours.
‒ Ergonomic body and friction thumb roller make readings fast
‒ Easy to read, jumbo digit display
‒ Moisture and dust resistant steel
Zero button instantly sets closed jaws or any reference point to zero. Floating zero may also be set mid-measurement to read difference results without calculations.
Weight: 255 g
A serial numbered certificate is provided from an ISO 17025 calibration laboratory accredited by A2LA to indicate instrument traceability to standards provided by NIST.
Description
Digital caliper
Digital caliper
Range (mm)
0 - 150
0 - 200
Resolution (mm)
0,01
0,01
Accuracy
±0,03 mm
±0,03 mm 1
1
Pk Cat. No.
819-0012
819-0013
Description
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
Sieve standards
60 VWR ® for calibration | vwr.com
For
Sieve size 20 µm
Sieve size 25 µm
Sieve size 32 µm
Sieve size 38 µm
Sieve size 45 µm
Sieve size 53 µm
Sieve size 63 µm
Sieve size 75 µm
Sieve size 90 µm
Sieve size 106 µm
Sieve size 125 µm
Sieve size 150 µm
Sieve size 180 µm
Sieve size 212 µm
Sieve size 250 µm
Sieve size 300 µm
Sieve size 355 µm
Sieve size 425 µm
Sieve size 500 µm
Sieve size 600 µm
Sieve size 710 µm
Sieve size 850 µm
Sieve size 1,00 mm
Sieve size 1,18 mm
Sieve size 1,40 mm
Sieve size 1,70 mm
Sieve size 2,00 mm
Sieve size 2,36 mm
Sieve size 2,80 mm
Sieve size 3,35 mm
Sieve size 100 mm
Sieve size 100 mm
SIEVE STANDARDS, NIST AND NPL TRACEABLE
Unique microsphere method of sieve calibration applicable to all sieves from
20 to 3350 μm.
‒ Method analyses over 80% of the sieve surface
‒ Results independent of sieve shaking method
‒
‒ Typical calibration time of about 1 minute
‒
No need to send sieves away for calibration
Single-use bottles remove operator bias
Accuracy and repeatability better than 1 μm.
Mean aperture size traceable to NIST and NPL.
Calibration range
270 - 333 µm
322 - 398 µm
377 - 470 µm
440 - 557 µm
526 - 657 µm
648 - 809 µm
774 - 950 µm
0,91 -1,11 mm
1,09 - 1,33 mm
1,29 - 1,61 mm
1,51 - 1,87 mm
1,84 - 2,24 mm
2,15 - 2,66 mm
2,56 - 3,23 mm
3,07 - 3,78 mm
100 - 112 µm
250 - 280 µm
19 - 24 µm
22 - 30 µm
28 - 34 µm
34 - 41 µm
42 - 50 µm
48 - 59 µm
57 - 70 µm
67 - 83 µm
79 - 97 µm
91 - 117 µm
112 - 140 µm
134 - 167 µm
161 - 200 µm
191 - 237 µm
226 - 281 µm
Pk
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
Cat. No.
510-0176
510-0177
510-0178
510-0179
510-0180
510-0181
510-0182
510-0183
510-0184
510-0185
510-0166
510-0167
510-0168
510-0169
510-0170
510-0171
510-0172
510-0173
510-0174
510-0175
510-0186
510-0187
510-0377
510-0378
510-0379
510-0380
510-0381
510-0382
510-0383
510-0384
510-2089
510-2090
CALIBRATION TOOLS
Timers selector guide
609-0199 609-0184
Timing capacity Accuracy Count Memory
Mechanical model
60 min 3 min ↓
Digital single channel models without clock, supplied with calibration certificate
±0,01%
↓
↕
3 s
±0,01%
↕
↓
99 min, 59 s
↕
±5 s/day (res ,01) ↕
19 h, 59 min or 99 min,
59 s
±0,01%
±5 s/day (res ,01)
99 h, 59 min, 59 s ±0,01%
Digital, 2 channels with clock
23 h, 59 min, 59 s
Digital, 2 channels without clock
±0,01%
↑
↕
↓
↕
↕
↕
No
Yes
No
Yes
Yes
Yes
Yes
Yes
3 countdown memories
Yes
Yes
Yes
Yes
99 h, 59 min, 59 s ±0,01% ↓ Yes
Digital, 3 channels with clock
99 h, 59 min, 59 sec ±0,01%
Digital, 4 channels with clock
(±3 s/day) ±0,01 s
99 h, 59 min, 59 s
±0,01%
Switchable timing capacity: 23 h, 59 min or 59 min, 59 s
±5 s/day (res ,01)
↕
↕
↑
↕
Yes
Yes
Yes
Yes
Audible
Yes
Loud
Yes
Yes
Loud
No
Yes
Yes
Adjustable
Yes
Yes
Yes
Yes
Adjustable
Yes
Loud
Yes
Yes
Alarm
Visual
No
Other
No
No
No
No
No
No
Yes
No
Flashing LED
No
Yes
No
Yes
Green LED flashes while counting down //
RED LED flashes once zero has been reached
No
No
No
No
No
No
Indicates time elapsed since alarm
Indicates time elapsed since alarm
Vibration
No
No
No
No
No
No
No
No
Indicates time elapsed since start
Indicates time elapsed since alarm
Cat. No.
609-0127
609-0185
609-0203
609-0128
609-0184
609-0197
609-0206
609-0189
609-0198
609-0190
609-0207
609-0205
609-0090
609-0199
609-0204
609-0181
609-0195
609-0208
vwr.com | VWR ® for calibration 61
CALIBRATION TOOLS
62 VWR ® for calibration | vwr.com
BULB PIPETTES, ONE MARK, CLASS AS
Borosilicate 3.3 glass.
‒ Calibrated to deliver, total delivery
‒ Ring mark and inscriptions in high contrast amber stain
‒ Not available with individual certificate
DIN EN ISO 648
Dated batch identification and batch certificate included.
4
5
10
20
2
3
1
Capacity (ml)
25
50
100
Tolerance (± ml)
0,007
0,010
0,010
0,015
0,015
0,020
0,030
0,030
0,050
0,080
410
410
450
520
Length (mm)
300
330
350
530
550
600
3
2
3
3
3
3
Pk
3
2
2
2
BULB PIPETTES, TWO MARKS, CLASS AS
Borosilicate 3.3 glass.
‒ Calibrated to deliver (TD, Ex)
‒ Ring mark and inscriptions in high contrast amber stain
DIN EN ISO 648
Dated batch identification and batch certificate.
Capacity (ml)
3
4
5
1
2
10
20
25
50
100
Tolerance (± ml)
0,007
0,010
0,010
0,015
0,015
0,020
0,030
0,030
0,050
0,080
Length (mm)
300
330
350
410
410
450
520
530
550
600
GRADUATED PIPETTES, TYPE 3, CLASS AS
Borosilicate 3.3 glass.
‒ Calibrated to deliver (TD, Ex)
‒ Marks and inscriptions in amber stain
‒ Cotton plug ending (cotton plugs not included)
DIN 12696, ISO 835
Indludes a lot certificate.
Capacity (ml)
2
5
1
0,5
10
20
25
50
Division (ml)
0,01
0,01
0,02
0,1
0,1
0,1
0,1
0,2
Tolerance (± ml)
0,0075
0,01
0,015
0,045
0,075
0,15
0,15
0,3
Pk
3
3
3
2
3
3
2
2
Pk
3
3
3
3
3
2
2
3
2
2
Cat. No.
612-4775
612-4776
612-4777
612-4778
612-4779
612-4780
612-4781
612-4782
612-4783
612-4784
Cat. No.
612-4767
612-4768
612-4769
612-4770
612-4771
612-4772
612-4773
612-4774
Cat. No.
612-4129
612-4130
612-4131
612-4132
612-4133
612-4134
612-4135
612-4136
612-4137
612-4138
CALIBRATION TOOLS
MEASURING CYLINDERS
Borosilicate 3.3 glass, class A, tall form.
‒ Calibrated to contain (TC, In)
‒ Hexagonal glass base with spout
‒ Blue graduations with ring marks at major graduations
DIN 12680
Batch number and enclosed batch certificate.
Capacity (ml)
5
10
25
50
100
250
500
1000
2000
Division (ml)
5
10
20
1
2
0,1
0,2
1
0,5
Tolerance (± ml)
2,5
5
10
0,05
0,1
0,25
0,5
1
0,5
Pk
1
1
2
2
2
2
2
2
2
MIXING MEASURING CYLINDERS
Borosilicate 3.3 glass, class A.
‒ Calibrated to contain (TC, In)
‒ Hexagonal glass base, NS ground and PE stopper
‒ Ring marks at major graduations, marks and inscriptions in blue colour
DIN EN ISO 4788
Batch certificate included.
Capacity (ml)
10
25
50
100
250
500
1000
1,0
2,0
5,0
10,0
Division (ml)
0,2
0,5
1,0
285
350
395
500
Height (mm)
160
190
220
1
2
2
2
2
2
Pk
2
Cat. No.
612-5771
612-5772
612-5773
612-5774
612-5775
612-5776
612-5777
Cat. No.
612-3832
612-3833
612-3834
612-3835
612-3836
612-3837
612-3838
612-3839
612-3840
VOLUMETRIC FLASKS
Borosilicate 3.3 glass, amber, class A.
‒ Red PE stopper
‒ Marks and inscriptions in white enamel
‒ Calibrated to contain (TC, In)
DIN EN ISO 1042
Batch number and enclosed batch certificate.
Capacity (ml)
5
10
20
25
50
100
200
250
500
1000
2000
NS
10 /19
10 /19
10 /19
10 /19
12/ 21
14/ 23
14/ 23
14/ 23
19/ 26
24/ 29
29/ 32
Tolerance (± ml)
0,15
0,15
0,25
0,40
0,60
0,04
0,04
0,04
0,04
0,06
0,10
Pk
1
1
2
2
2
2
2
2
2
2
2
vwr.com | VWR ® for calibration 63
Cat. No.
612-3821
612-3822
612-3823
612-3824
612-3825
612-3826
612-3827
612-3828
612-3829
612-3830
612-3831
CALIBRATION TOOLS
VOLUMETRIC FLASKS
Borosilicate 3.3 glass, class A.
‒ PP white stopper
‒ Marks in white and inscriptions in blue enamel
‒ Calibrated to contain (TC, In)
DIN EN ISO 1042.
Batch number and enclosed batch certificate.
Capacity (ml)
5
10
20
25
50
100
200
250
500
1000
2000
NS
10 /19
10 /19
10/ 19
10/ 19
12/ 21
14/ 23
14 /23
14/ 23
19/ 26
24/ 29
29/ 32
Tolerance (± ml)
0,040
0,040
0,040
0,040
0,060
0,100
0,150
0,150
0,250
0,400
0,600
Pk
1
1
2
2
2
2
2
2
2
2
2
Cat. No.
612-3738
612-3740
612-3741
612-3742
612-3743
612-3744
612-3745
612-3746
612-3818
612-3819
612-3820
WEIGHING BOTTLES
Borosilicate 3.3 glass, low form.
‒ Interchangeable knobbed lid with ground joint
‒ Writing area in white
‒ Resistant against chemicals and thermal shock
30
45
80
Capacity (ml)
6
15
15
Ø×H (mm)
25×25
35×30
40×25
50×30
60×30
80×30
NS
24/ 12
34/ 12
40/ 12
50/ 12
60/ 12
80/ 12
1
1
1
1
1
1
Pk Cat. No.
611-3817
611-3818
611-3819
611-3820
611-3821
611-3822
64 VWR ® for calibration | vwr.com
CALIBRATION TOOLS
Set
1 - 500 mg
1 mg - 50 g
1 mg - 100 g
1 mg - 200 g
1 mg - 500 g
1 mg - 1 kg
1 mg - 2 kg
1 mg - 5 kg
1 mg - 10 kg
1 g - 50 g
1 g - 100 g
1 g - 200 g
1 g - 500 g
1 g - 1 kg
1 g - 2 kg
1 g - 5 kg
1 g - 10 kg
1
1
1
1
1
1
1
1
Includes 1 -
500 mg set +
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1 mg
1 g
2 mg
2
2 g
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Weight Weight set No. of weights
E1 cobalt alloy weights in plastic box with COFRAC certificate
1 mg
2 mg
5 mg
10 mg
20 mg
50 mg
100 mg
200 mg
500 mg
Set of 12 cobalt alloy weights in plastic box with COFRAC certificate
1 - 500 mg 12
Set of 12 cobalt alloy weights in wooden box with COFRAC certificate
1 - 500 mg 12
Set of 21 stainless steel weights in plastic box with COFRAC certificate
1 mg - 100 g 21
Set of 21 stainless steel weights in plastic box with COFRAC certificate
1 mg - 100 g 21
Set of 23 stainless steel weights in plastic box with COFRAC certificate
1 mg - 200 g 23
Set of 23 stainless steel weights in plastic box with COFRAC certificate
1 mg - 200 g 23
Tolerance
±3 µg
±3 µg
±3 µg
±3 µg
±3 µg
±4 µg
±5 µg
±6 µg
±8 µg
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
CALIBRATION WEIGHTS E1 WITH CALIBRATION CERTIFICATE
Individual E1 OIML class weights are intended to ensure traceability between the national mass standards (with values derived from the International Prototype of the kilogram) and Class E2 and lower weights. They are also used with microbalances.
Anti-magnetic, cobalt alloy weights are available from 1 to 500 mg. Packed in a plastic case, the wire weights are easy to store. Anti-magnetic, corrosion resistant, highly polished stainless steel knob weights are available from 1 to 200 g. Packed in a plastic case the weights are easy to store. Sets of weights are also available in either cobalt alloy or stainless steel with a choice of a plastic or wooden storage box.
‒ Identification number guarantees traceability for weights from 1 g upwards
‒ Laser engraving improves legibility of the markings
‒ Supplied with COFRAC certificate
Conform to OILM R111 recommendations.
1
5 mg
5 g
1
10 mg
10 g
20 mg
2
20 g
Weights included
50 mg 100 mg
1
50 g
1
100 g
200 mg
2
200 g
1
500 mg
500 g 1 kg 2 kg 5 kg 10 kg
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
1
1
1
1
1
1
Total weight (g)
1,11
1,11
211,11
211,11
611,11
611,11
Type
Wire weight
Wire weight
Wire weight
Wire weight
Wire weight
Wire weight
Wire weight
Wire weight
Wire weight
Pk
1 SET
1 SET
1 SET
1 SET
1 SET
1 SET
1
1
1
1
1
1
1
1
1
Cat. No.
611-3652
611-3653
611-3654
611-3655
611-3656
611-3657
611-3635
611-3636
611-3637
611-3638
611-3639
611-3640
611-3641
611-3642
611-3643
vwr.com | VWR ® for calibration 65
CALIBRATION TOOLS
200 mg
500 mg
1 g
2 g
5 g
10 g
20 g
50 g
Weight
1 mg
2 mg
5 mg
10 mg
20 mg
50 mg
100 mg
1 kg
2 kg
5 kg
10 kg
20 kg
50 kg
100 g
200 g
500 g
1 kg
2 kg
5 kg
0,16
0,30
0,75
1,6
3,0
7,5
10 kg
20 kg
16,0
30,0
E2 weights in wooden boxes with COFRAC certificate
500 g 0,75
1,6
3
7,5
16
30
50
0,020
0,025
0,03
0,04
0,05
0,06
0,08
0,10
Tolerance (± mg)
0,006
0,006
0,006
0,008
0,010
0,012
0,016
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Pk
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
CALIBRATION WEIGHTS, CLASS E2
Weights made from solid, anti-magnetic, polished stainless steel.
‒ Wire weights up to 500 mg in cobalt alloy
‒ Identification number guarantees traceability for weights from 1 g upwards
‒ Laser engraving improves legibility of the markings
‒ Available with or without COFRAC certificate
Suitable for high resolution electronic balances.
Conform to OILM R111 recommendations.
All weights from 1 mg to 20 kg are available with or without COFRAC certificate
- please visit vwr.com
or contact your local Avantor sales office. A range of weight sets are also available - please search for product ‘Calibration weight sets, Class E2’.
Cat. No.
611-8131
611-8132
611-8133
611-8134
611-8135
611-8136
611-8137
611-8138
611-8139
611-8140
611-8141
611-8142
611-8143
611-8144
611-8145
611-8146
611-8147
611-8148
611-8149
611-8150
611-8151
611-8152
611-8428
611-8399
611-8400
611-8423
611-8424
611-8425
611-8426
611-8427
Weight Tolerance (± mg)
50 g
100 g
200 g
500 g
1 kg
2 kg
5 kg
10 kg
20 kg
E2 weights in plastic cases without certificate
1 mg 0,006
2 mg
5 mg
10 mg
0,006
0,006
0,008
20 mg
50 mg
100 mg
200 mg
500 mg
1 g
2 g
5 g
10 g
20 g
0,010
0,012
0,016
0,020
0,025
0,03
0,04
0,05
0,06
0,08
0,10
0,16
0,30
0,75
1,6
3,0
7,5
16,0
30,0
E2 weights in wooden boxes without certificate
500 g 0,75
1 kg
2 kg
1,6
3
5 kg
10 kg
20 kg
50 kg
7,5
16
30
50
Cat. No.
611-8101
611-8102
611-8103
611-8104
611-8105
611-8106
611-8107
611-8108
611-8109
611-8110
611-8111
611-8112
611-8113
611-8114
611-8115
611-8116
611-8117
611-8118
611-8119
611-8120
611-8121
611-8122
611-8398
611-8391
611-8392
611-8393
611-8394
611-8395
611-8396
611-8397
Pk
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
MORE
DETAILS
VWR ® balances and accessories premium line
HIGHLY ACCURATE RESULTS WITH
HIGH-END WEIGHING TECHNOLOGY
‒ Fast stabilisation time
‒ Easy to clean and high chemical resistance.
‒ Future-proof USB type C interface
‒ Industry-proof RS232 9-pin interface
‒ Underfloor weighing
66 VWR ® for calibration | vwr.com
CALIBRATION TOOLS
CALIBRATION WEIGHT SETS, CLASS E2
Weights made from solid, anti-magnetic, polished stainless steel. Suitable for high resolution electronic balances.
‒ Wire weights up to 500 mg in cobalt alloy
‒ Identification number guarantees traceability for weights from 1 g upwards
‒ Laser engraving improves legibility of the markings
‒ Available with or without COFRAC certificate
Conform to OILM R111 recommendations.
All weight sets listed in the ‘set contents’ table are available with or without
COFRAC certificate - please visit vwr.com
or contact your local Avantor sales office.
Weights are also available individually - please search for product ‘Calibration weights, Class E2’.
Set
1 - 500 mg
1
1
1
1
1
1
1
1
Includes 1 -
500 mg set +
1 mg - 50 g
1 mg - 100 g
1 mg - 200 g
1 mg - 500 g
1 mg - 1 kg
1 mg - 2 kg
1 mg - 5 kg
1 mg - 10 kg
1 g - 50 g
1 g - 100 g
1 g - 200 g
1 g - 500 g
1 g - 1 kg
1 g - 2 kg
1 g - 5 kg
1 g - 10 kg
Weight set
1 mg - 500 mg
1 mg - 50 g
1 mg - 100 g
1 mg - 200 g
1 mg - 500 g
1 mg - 1 kg
1 mg - 2 kg
1 mg - 5 kg
1 mg - 10 kg
1 g - 50 g
1 g - 100 g
1 g - 200 g
1 g - 500 g
1 g - 1 kg
1 g - 2 kg
1 g - 5 kg
1 g - 10 kg
No. of weights Total weight (g)
12 1,11
20
21
23
24
25
27
28
29
8
9
11
12
13
15
16
17
111,11
211,11
611,11
1111,11
2111,11
6111,11
11111,11
21111,11
110
210
610
1110
2110
6110
11110
21110
E2 weight sets in plastic cases with certificate
1 mg - 500 mg 12 1,11
1 mg - 100 g
1 mg - 200 g
1 mg - 500 g
21
23
24
211,11
611,11
1111,11
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1 mg
1 g
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2 mg
2
2 g
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5 mg
5 g
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Pk
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10 mg
10 g
Cat. No.
611-8742
611-8743
611-8744
611-8745
611-8746
611-8747
611-8748
611-8749
611-8750
611-8751
611-8752
611-8753
611-8754
611-8755
611-8756
611-8757
611-8758
611-8454
611-8455
611-8456
611-8457
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
20 mg
2
20 g
Weights included
1
50 mg
50 g
1
100 mg
100 g
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
200 mg
2
200 g
1
500 mg
500 g 1 kg
1
1
1
1
1
1
1
1
1
1 1
1
1
1
1
1
1
1
Weight set No. of weights Total weight (g)
E2 weight sets in wooden boxes with certificate
1 g - 100 g
1 g - 200 g
9
11
210
610
1 g - 500 g 12 1110
E2 weight sets in wooden boxes without certificate
1 mg - 500 mg
1 mg - 50 g
12
20
1,11
111,11
1 mg - 100 g
1 mg - 200 g
1 mg - 500 g
1 mg - 1 kg
1 mg - 2 kg
1 mg - 5 kg
1 mg - 10 kg
1 g - 50 g
1 g - 100 g
1 g - 200 g
1 g - 500 g
1 g - 1 kg
1 g - 2 kg
1 g - 5 kg
1 g - 10 kg
21
23
24
25
27
28
29
8
9
11
12
13
15
16
17
211,11
611,11
1111,11
2111,11
6111,11
11111,11
21111,11
110
210
610
1110
2110
6110
11110
21110
2 kg
2
2
2
2
2
2
1
1
1
Pk
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5 kg
1
10 kg
1
Cat. No.
611-8458
611-8459
611-8460
611-8722
611-8723
611-8724
611-8725
611-8726
611-8727
611-8728
611-8729
611-8730
611-8731
611-8732
611-8733
611-8734
611-8735
611-8736
611-8737
611-8738
vwr.com | VWR ® for calibration 67
CALIBRATION TOOLS
Weight Tolerance (± mg)
F1 weights in plastic cases with certificate
1 mg 0,020
2 mg
5 mg
0,020
0,020
10 mg
20 mg
50 mg
0,025
0,03
0,04
100 mg
200 mg
500 mg
1 g
2 g
5 g
10 g
20 g
50 g
0,05
0,06
0,08
0,10
0,12
0,15
0,20
0,25
0,30
1 kg
2 kg
5 kg
10 kg
20 kg
50 kg
100 g
200 g
500 g
1 kg
0,50
1,0
2,5
5
2 kg
5 kg
10 kg
20 kg
10
25
50
100
F1 weights in wooden boxes with certificate
500 g 2,5
5
10
25
50
100
250
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Pk Cat. No.
611-8231
611-8232
611-8233
611-8234
611-8235
611-8236
611-8237
611-8238
611-8239
611-8240
611-8241
611-8242
611-8243
611-8244
611-8245
611-8246
611-8247
611-8248
611-8249
611-8250
611-8251
611-8252
611-8094
611-8040
611-8041
611-8042
611-8049
611-8058
611-8071
611-8093
CALIBRATION WEIGHTS, CLASS F1
Weights made from anti-magnetic, polished stainless steel. Suitable for medium resolution precision electronic balances. Weights have adjustment cavities for weights of more than 20 g.
‒ Wire weights up to 500 mg in cobalt alloy
‒ Identification number guarantees traceability for weights from 1 g upwards
‒ Laser engraving improves legibility of the markings
‒ Available with or without COFRAC certificate
Conform to OILM R111 recommendations.
All weights from 1 mg to 20 kg are available with or without COFRAC certificate
- please visit vwr.com
or contact your local Avantor sales office. A range of sets of weights are also available - please search for product ‘Calibration weight sets, Class F1’.
Weight Tolerance (± mg)
F1 weights in plastic cases without certificate
1 mg
2 mg
0,020
0,020
5 mg
10 mg
20 mg
50 mg
0,020
0,025
0,03
0,04
100 mg
200 mg
500 mg
1 g
2 g
5 g
10 g
20 g
50 g
100 g
200 g
500 g
1 kg
2 kg
5 kg
1,0
2,5
5
10
25
0,05
0,06
0,08
0,10
0,12
0,16
0,20
0,25
0,30
0,50
10 kg
20 kg
50
100
F1 weights in wooden boxes without certificate
500 g 2,5
1 kg
2 kg
5 kg
10 kg
20 kg
50 kg
2,5
10
25
50
100
150
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Pk Cat. No.
611-8201
611-8202
611-8203
611-8204
611-8205
611-8206
611-8207
611-8208
611-8209
611-8210
611-8211
611-8212
611-8213
611-8214
611-8215
611-8216
611-8217
611-8218
611-8219
611-8220
611-8221
611-8222
611-8039
611-8028
611-8029
611-8033
611-8035
611-8036
611-8037
611-8038
MORE
DETAILS
VWR ® for weighing
Lighten the weighing load
‒ Choice - enough to cover almost every application packed into a series of models without being too overwhelming
‒ Performance - market-leading consistency and reliability backed up with warranties that run for many years
‒ Quality and features to fit your application
68 VWR ® for calibration | vwr.com
CALIBRATION TOOLS
Set
1 - 500 mg
1 mg - 100 g
1 mg - 200 g
1 mg - 500 g
1 mg - 1 kg
1 mg - 2 kg
1 mg - 5 kg
1 mg - 10 kg
1 g - 100 g
1 g - 200 g
1 g - 500 g
1 g - 1 kg
1 g - 2 kg
1 g - 5 kg
1 g - 10 kg
1
1
1
1
1
1
1
Includes 1 -
500 mg set +
1
1
1
1
1
1
1
1
1 mg
1 g
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2 mg
2
2 g
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5 mg
5 g
CALIBRATION WEIGHT SETS, CLASS F1
Weights made from anti-magnetic, polished stainless steel. Suitable for medium resolution, precision electronic balances. Weights of more than 20 g have adjustment cavities.
‒ Wire weights up to 500 mg in cobalt alloy
‒ Identification number guarantees traceability for weights from 1 g upwards
‒ Laser engraving improves legibility of the markings
‒ Available with or without COFRAC certificate
Conform to OILM R111 recommendations.
All weight sets listed in the ‘set contents’ table are available with or without
COFRAC certificate - please visit vwr.com
or contact your local Avantor sales office.
Weights are also available individually - please search for product ‘Calibration weights, Class F1’.
1
1
1
1
1
1
1
1
10 mg
10 g
2
2
2
2
2
2
2
20 mg
2
20 g
Weights included
50 mg 100 mg
1
50 g
1
100 g
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
200 mg
2
200 g
1
500 mg
500 g 1 kg
1
1
1
1
1 1
1
1
1
2 kg
2
2
2 1
1
5 kg
1
10 kg
1
1
1
1
1
1
1
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
2
2
2 1
1
1
Weight set No. of weights Total weight (g)
F1 weight sets in wooden boxes with certificate
1 mg - 500 mg
1 mg - 50 g
12
20
1,11
111,11
1 mg - 100 g
1 mg - 200 g
1 mg - 500 g
1 mg - 1 kg
21
23
24
25
211,11
611,11
1111,11
2111,11
1 mg - 2 kg
1 mg - 5 kg
1 mg - 10 kg
1 g - 50 g
1 g - 100 g
1 g - 200 g
1 g - 500 g
1 g - 1 kg
1 g - 2 kg
1 g - 5 kg
27
28
29
8
9
11
12
13
15
16
6111,11
11111,11
21111,11
110
210
610
1110
2110
6110
11110
1 g - 10 kg 17
F1 weight sets in plastic cases with certificate
21110
1 mg - 500 mg
1 mg - 100 g
1 mg - 200 g
1 mg - 500 g
12
21
23
24
1,11
211,11
611,11
1111,11
1 mg - 2 kg
1 mg - 5 kg
1 g - 100 g
1 g - 200 g
27
28
9
11
6111,11
11111,11
210
610
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Pk Cat. No.
611-8632
611-8633
611-8634
611-8635
611-8636
611-8637
611-8638
611-8639
611-8640
611-8641
611-8642
611-8643
611-8644
611-8645
611-8646
611-8647
611-8648
611-8461
611-8462
611-8463
611-8464
611-8649
611-8650
611-8465
611-8466
Weight set
1 g - 500 g
1 g - 2 kg
1 g - 5 kg
No. of weights
12
15
16
Total weight (g)
1110
6110
11110
F1 weight sets in wooden boxes without certificate
1 mg - 500 mg 12 1,11
1 mg - 50 g
1 mg - 100 g
1 mg - 200 g
1 mg - 500 g
20
21
23
24
111,11
211,11
611,11
1111,11
1 mg - 1 kg
1 mg - 2 kg
1 mg - 5 kg
1 mg - 10 kg
1 g - 50 g
1 g - 100 g
1 g - 200 g
1 g - 500 g
1 g - 1 kg
1 g - 2 kg
25
27
28
29
8
9
11
12
13
15
2111,11
6111,11
11111,11
21111,11
110
210
610
1110
2110
6110
1 g - 5 kg
1 g - 10 kg
16
17
11110
21110
F1 weight sets in plastic cases without certificate
1 mg - 2 kg 27 6111,11
1 mg - 5 kg
1 g - 2 kg
1 g - 5 kg
28
15
16
11111,11
6110
11110
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Pk
1
1
1
1
vwr.com | VWR ® for calibration 69
Cat. No.
611-8467
611-8651
611-8652
611-8602
611-8603
611-8292
611-8604
611-8605
611-8606
611-8607
611-8608
611-8609
611-8610
611-8611
611-8612
611-8613
611-8614
611-8615
611-8616
611-8617
611-8618
611-8619
611-8620
611-8621
CALIBRATION TOOLS
Weight set
200 mg; 5 g; 50 g
200 mg; 10 g; 100 g
200 mg; 20 g; 200 g
200 mg; 50 g; 500 g
2 g; 20 g; 200 g
3
3
3
3
No. of weights
3
CALIBRATION WEIGHTS, CLASS F1, CALBOX, CERTIFIED
An economical range of calibration sets, with only three stainless steel weights, to meet routine calibration requirements of precision and analytical balances.
‒ Individual serial number and calibration certificate
‒ Each weight, from 1 g upwards, has a unique identification number for traceability
‒ Laser engraving improves legibility of the markings
Weights supplied in modern aluminium case with tweezers and balance brush.
Type
With certificate 1
Pk
With certificate 1
With certificate 1
With certificate 1
With certificate 1
Cat. No.
611-2428
611-2429
611-2430
611-2432
611-2431
Weight set
2 g; 50 g; 500 g
2 g; 100 g; 1 kg
20 g; 100 g; 1 kg
20 g; 200 g; 2 kg
20 g; 500 g; 5 kg
3
3
3
3
No. of weights
3
Type
With certificate 1
Pk
With certificate 1
With certificate 1
With certificate 1
With certificate 1
Cat. No.
611-2433
611-2434
611-2435
611-2436
611-2437
200 mg
500 mg
1 g
2 g
5 g
10 g
20 g
50 g
100 g
200 g
Weight Tolerance (± mg)
F2 weights in plastic cases with certificate
1 mg
2 mg
0,06
0,06
5 mg
10 mg
20 mg
50 mg
100 mg
0,06
0,08
0,10
0,12
0,16
0,5
0,6
0,8
1,0
1,6
3,0
0,20
0,25
0,3
0,4
500 g
1 kg
2 kg
5 kg
7,5
15
30
75
10 kg
20 kg
150
300
F2 weights in wooden boxes with certificate
500 g
1 kg
7,5
15
2 kg
5 kg
10 kg
20 kg
50 kg
30
75
150
300
750
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Pk
70 VWR ® for calibration | vwr.com
CALIBRATION WEIGHTS, CLASS F2
Stainless steel Class F2 weights for users who require moderate levels of tolerance values in their calibration and day-to-day weighing.
‒ Wire weights up to 500 mg in cobalt alloy
‒ Identification number guarantees traceability for weights from 1 g upwards
‒ Laser engraving improves legibility of the markings
‒ Available with or without COFRAC certificate
Conform to OILM R111 recommendations.
All weights from 1 mg to 20 kg are available with or without COFRAC certificate
- please visit vwr.com
or contact your local Avantor sales office. A range of sets of weights are also available - please search for product ‘Calibration weight sets, Class F2’.
Cat. No.
611-8179
611-8180
611-8181
611-8182
611-8183
611-8184
611-8185
611-8186
611-8187
611-8188
611-8189
611-8190
611-8195
611-8196
611-8197
611-8198
611-8199
611-8200
611-8223
611-8224
611-8225
611-8226
611-8227
611-8172
611-8173
611-8174
611-8175
611-8176
611-8177
611-8178
200 mg
500 mg
1 g
2 g
5 g
10 g
20 g
50 g
100 g
200 g
Weight Tolerance (± mg)
F2 weights in plastic cases without certificate
1 mg
2 mg
0,06
0,06
5 mg
10 mg
20 mg
50 mg
100 mg
0,06
0,08
0,10
0,12
0,16
0,5
0,6
0,8
1,0
1,6
3,0
0,20
0,25
0,3
0,4
500 g
1 kg
2 kg
5 kg
7,5
15
30
75
10 kg
20 kg
150
300
F2 weights in wooden boxes without certificate
500 g
1 kg
7,5
15
2 kg
5 kg
10 kg
20 kg
50 kg
30
75
150
300
750
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Pk Cat. No.
611-8126
611-8127
611-8128
611-8129
611-8130
611-8154
611-8155
611-8156
611-8157
611-8158
611-8159
611-8160
611-8161
611-8162
611-8163
611-8164
611-8165
611-8166
611-8167
611-8168
611-8169
611-8170
611-8171
611-8095
611-8096
611-8097
611-8098
611-8099
611-8100
611-8125
CALIBRATION TOOLS
CALIBRATION WEIGHT SETS, CLASS F2
Stainless steel. Wire weights up to 500 mg in cobalt alloy.
‒ Identification number guarantees traceability for weights from 1 g upwards
‒ Laser engraving improves legibility of the markings
‒ Available with or without COFRAC certificate
Conform to OILM R111 recommendations.
Set
1 - 500 mg
20 - 500 mg
1 mg - 100 g
1 mg - 200 g
1 mg - 500 g
1 mg - 1 kg
1 mg - 2 kg
1 mg - 5 kg
1 mg - 10 kg
1 g - 100 g
1 g - 200 g
1 g - 500 g
1 g - 1 kg
1 g - 2 kg
1 g - 5 kg
1 g - 10 kg
1
1 mg
1
1
1
1
1
1
1
Includes 1 -
500 mg set +
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1 g
1
5 mg
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5 g
2 mg
2
2 g
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
10 mg
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10 g
2
2
2
2
2
2
2
2
2
2
2
2
2
2
20 mg
2
2
20 g
Weights included
50 mg 100 mg
1
1
50 g
1
1
100 g
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
200 mg
2
2
200 g
1
500 mg
1
500 g 1 kg
1
1
1
1
1
1
1
1
1
1 1
1
1
1
1
1
1
1
2 kg
2
2
2
2
2
2
1
1
1
1
5 kg
1
1
10 kg
Weight set No. of weights Total weight (g)
F2 weight sets in wooden boxes with certificate
1 mg - 500 mg
1 mg - 50 g
12
20
1,11
111,11
1 mg - 100 g
1 mg - 200 g
1 mg - 500 g
1 mg - 1 kg
21
23
24
25
211,11
611,11
1111,11
2111,11
1 mg - 2 kg
1 mg - 5 kg
1 mg - 10 kg
1 g - 50 g
1 g - 100 g
1 g - 200 g
1 g - 500 g
1 g - 1 kg
1 g - 2 kg
1 g - 5 kg
27
28
29
8
9
11
12
13
15
16
1 g - 10 kg 17
F2 weight sets in plastic cases with certificate
1 mg - 2 kg
1 mg - 5 kg
1 g - 2 kg
27
28
15
6111,11
11111,11
6110
1110
2110
6110
11110
21110
6111,11
11111,11
21111,11
110
210
610
1 g - 5 kg 16 11110
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Pk Cat. No.
611-8692
611-8693
611-8694
611-8695
611-8696
611-8697
611-8698
611-8699
611-8700
611-8701
611-8702
611-8703
611-8704
611-8705
611-8706
611-8707
611-8708
611-8709
611-8710
611-8711
611-8712
Weight set No. of weights Total weight (g)
F2 weight sets in wooden boxes without certificate
1 mg - 500 mg
1 mg - 50 g
12
20
1,11
111,11
1 mg - 100 g
1 mg - 200 g
1 mg - 500 g
1 mg - 1 kg
21
23
24
25
211,11
611,11
1111,11
2111,11
1 mg - 2 kg
1 mg - 5 kg
1 mg - 10 kg
1 g - 50 g
1 g - 100 g
1 g - 200 g
1 g - 500 g
1 g - 1 kg
1 g - 2 kg
1 g - 5 kg
27
28
29
8
9
11
12
13
15
16
1 g - 10 kg 17 21110
F2 weight sets in plastic cases without certificate
1 mg - 2 kg
1 mg - 5 kg
1 g - 2 kg
1 g - 5 kg
27
28
15
16
6111,11
11111,11
6110
11110
6111,11
11111,11
21111,11
110
210
610
1110
2110
6110
11110 1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Pk Cat. No.
611-8662
611-8663
611-8664
611-8665
611-8666
611-8667
611-8668
611-8669
611-8670
611-8671
611-8672
611-8673
611-8674
611-8675
611-8676
611-8677
611-8678
611-8679
611-8680
611-8681
611-8682
vwr.com | VWR ® for calibration 71
CALIBRATION TOOLS
CALIBRATION WEIGHTS, CLASS 1
Stainless steel masses adjusted to Class 1 for precise checking and adjustment of electronic balances.
‒ ASTM
‒ Individual weights are supplied without certificate.
Weight (g)
50
100
200
500
1000
2000
5000
10000
Tolerance (± mg)
120
250
500
1200
2500
5000
12000
25000 1
1
1
1
1
1
1
1
Pk Cat. No.
611-8759
611-8760
611-8761
611-8762
611-8763
611-8764
611-8765
611-8766
CALIBRATION WEIGHTS, CLASS M1
Weights from 1 to 50 g are monobloc weights, with larger weights having an adjusting cavity.
All weights are supplied in plastic cases.
Weight Tolerance (± mg)
50 g
100 g
200 g
500 g
1 kg
2 kg
5 kg
10 kg
Aluminium sheet weights with certificate, M1
1 mg 0,2
2 mg
5 mg
0,2
0,2
10 mg
20 mg
50 mg
100 mg
0,25
0,3
0,4
0,5
200 mg
500 mg
0,6
0,8
Stainless steel weights with certificate, M1
1 g 1,0
2 g
5 g
10 g
20 g
1,2
1,6
2,0
2,5
3,0
5
10
25
50
100
250
500
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Pk Cat. No.
611-8272
611-8273
611-8274
611-8275
611-8276
611-8277
611-8278
611-8279
611-8280
611-8281
611-8282
611-8283
611-8284
611-8285
611-8286
611-8287
611-8288
611-8289
611-8294
611-8295
611-8296
611-8297
Weight Tolerance (± mg)
50 g
100 g
200 g
500 g
1 kg
2 kg
5 kg
10 kg
Aluminium sheet weights without certificate, M1
1 mg 0,2
2 mg
5 mg
0,2
0,2
10 mg
20 mg
50 mg
100 mg
0,25
0,3
0,4
0,5
200 mg
500 mg
0,6
0,8
Stainless steel weights without certificate, M1
1 g 1,0
2 g
5 g
10 g
20 g
1,2
1,6
2,0
2,5
3,0
5
10
25
50
100
250
500
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Pk Cat. No.
611-8259
611-8260
611-8261
611-8262
611-8263
611-8264
611-8265
611-8266
611-8267
611-8268
611-8269
611-8270
611-8271
611-8228
611-8229
611-8230
611-8253
611-8254
611-8255
611-8256
611-8257
611-8258
72 VWR ® for calibration | vwr.com
CALIBRATION TOOLS
BLOCK WEIGHTS, CLASS M1
Rectangular weights made from cast iron (density 7,2 g/cm³).
‒ Indelible unique identification number guarantees traceability
Colour: Grey
Conforms to OILM, COFRAC accredited.
50
5
10
20
50
Weight (kg)
5
10
20
Tolerance (± mg)
250
500
1000
2500
250
500
1000
2500
Type
Without certificate
Without certificate
Without certificate
Without certificate
With certificate
With certificate
With certificate
With certificate
1
1
1
1
1
1
1
1
Pk Cat. No.
611-8298
611-8299
611-8300
611-8323
611-8324
611-8325
611-8326
611-8327
BLOCK WEIGHTS, IRON, CLASS M2
Rectangular weights made from cast iron, permanently magnetised.
‒ Indelible unique identification number guarantees traceability
‒ Painted grey
‒ Adjustment cavity sealed with a lead plug
Conforms to OILM, COFRAC accredited.
Weight (kg)
5
10
20
50
Block weights without certificate
5
10
20
50
Tolerance (± mg)
750
1600
3000
7500
750
1600
3000
7500
1
1
1
1
Pk
1
1
1
1
Cat. No.
611-8387
611-8388
611-8389
611-8390
611-8383
611-8384
611-8385
611-8386
Description
Cleaning kit for weights and balances
BALANCE AND WEIGHT CLEANING KIT
Cleaning kit containing a puffer brush (lens cleaning brush), cotton cloth and pair of nitrile gloves.
In a resealable plastic bag.
Pk
1 KIT
Cat. No.
611-2886
vwr.com | VWR ® for calibration 73
CALIBRATION TOOLS
Set
500 g
1 kg
Weight (g)
2
5
1
Single weight
10
20
50
100
200
500
Set of weights in plastic case
1 - 500
1 - 1000
1
1
1 g 2 g
2
2
SCHOOL WEIGHTS
Brass weights which are ideal for schools introducing the concepts of weights and forces.
1
1
5 g
Tolerance
0,03
0,03
0,03
0,03
0,03
0,03
0,03
0,03
0,03
10 g
2
2
Weights included
1
1
20 g
1
1
1
1
1
1
1
1
1
1
1
Pk
1
1
50 g 100 g
2
2 1
1
200 g
1
500 g
Cat. No.
611-1843
611-1844
611-1845
611-1846
611-1847
611-1848
611-1849
611-1850
611-1851
611-1852
611-1853
LABORATORY LOG BOOKS
Imitation leather cover with coating, for durability in laboratory environments.
Acidfree, archive-safe paper (90 gsm). Used to record and log data relating to laboratory equipment, temperature, balance calibration, reagents, animal maintenance and sample receipts.
‒ All pages for logging documentation have specific column headings for easy data entry
‒ Pages sewn in sections, books have round binding so that they lay flat
‒ Waterproof and tough
GLP, GMP and GCP guidelines.
Colour
Red
Black
Green
Dark red
Red
White
No. of pages
96
168
168
168
168
168
1
1
1
1
1
1
Pk Cat. No.
818-0102
818-0103
818-0104
818-0105
818-0106
818-0107
Description
Log book, laboratory equipment
Log book, animal maintenance
Log book, balance calibration
Log book, reagents
Log book, sample receipt
Log book, temperature
Description
Mini equipment log book, A5
Mini equipment log book, A6
74 VWR ® for calibration | vwr.com
MINI EQUIPMENT LOG BOOKS
‘FLEX’ covers with coating, for durability in laboratory environments. Acid-free, archive-safe paper (90 gsm).
‒ Pages specifically designed for logging and recording equipment data
‒ Tough coated cover
Format: A5 (14,8×21 cm) or A6 (10,5×14,8 cm), 96 pages, numbered.
All books made in accordance with GLP, GMP and GCP guidelines.
Colour
Red
Red
No. of pages
96
96 1
1
Pk Cat. No.
818-0108
818-0109
Setting science in motion to create a better world
AUSTRIA
VWR International GmbH
Graumanngasse 7
1150 Wien
Tel.: +43 1 97 002 0 [email protected]
BELGIUM
VWR International bv
Researchpark Haasrode 2020
Geldenaaksebaan 464
3001 Leuven
Tel.: +32 (0) 16 385 011 [email protected]
CZECH REPUBLIC
VWR International s. r. o.
Veetee Business Park
Pražská 442
CZ - 281 67 Stříbrná Skalice
Tel.: +420 321 570 321 [email protected]
DENMARK
VWR International A/S
Tobaksvejen 21
2860 Søborg
Tel.: +45 43 86 87 88 [email protected]
FINLAND
VWR International Oy
Valimotie 17-19
00380 Helsinki
Tel.: +358 (0) 9 80 45 51 [email protected]
FRANCE
VWR International S.A.S.
Immeuble Estréo
1-3 rue d’Aurion
93114 Rosny-sous-Bois cedex
Tel.: 0 825 02 30 30* (national)
Tel.: +33 (0) 1 45 14 85 00
(international) [email protected]
* 0,18 € TTC/min + prix appel
GERMANY
VWR International GmbH
Hilpertstraße 20a
D - 64295 Darmstadt
Tel.: 0800 702 00 07* (national)
Tel.: +49 (0) 6151 3972 0 (international) [email protected]
*Freecall
HUNGARY
VWR International Kft.
Simon László u. 4.
4034 Debrecen
Tel.: +36 52 521130 [email protected]
IRELAND
VWR International Ltd
Orion Business Campus
Northwest Business Park
Ballycoolin
Dublin 15
Tel.: +353 (0) 1 88 22 222 [email protected]
ITALY
VWR International S.r.l.
Via San Giusto 85
20153 Milano (MI)
Tel.: +39 02 3320311 [email protected]
THE NETHERLANDS
VWR International B.V.
Postbus 8198
1005 AD Amsterdam
Tel.: +31 (0) 20 4808 400 [email protected]
NORWAY
VWR International AS
Brynsalleen 4,
0667 Oslo
Tel.: +47 22 90 00 00 [email protected]
POLAND
VWR International Sp. z o.o.
Limbowa 5
80-175 Gdansk
Tel.: +48 58 32 38 200 [email protected]
PORTUGAL
VWR International - Material de
Laboratório, Lda
Centro Empresarial de Alfragide
Rua da Indústria, nº 6
2610-088 Amadora
Tel.: +351 21 3600 770 [email protected]
SPAIN
VWR International Eurolab S.L.U.
C/ Tecnología 5-17
A-7 Llinars Park
08450 - Llinars del Vallès
Barcelona
Tel.: +34 902 222 897 [email protected]
SWEDEN
VWR International AB
Fagerstagatan 18b
163 94 Stockholm
Tel.: +46 (0) 8 621 34 20 [email protected]
SWITZERLAND
VWR International GmbH
Lerzenstrasse 16/18
8953 Dietikon
Tel.: +41 (0) 44 745 13 13 [email protected]
UK
VWR International Ltd
Customer Service Centre
Hunter Boulevard - Magna Park
Lutterworth
Leicestershire
LE17 4XN
Tel.: +44 (0) 800 22 33 44 [email protected]
CHINA
VWR (Shanghai) Co., Ltd
Bld.No.1, No.3728 Jinke Rd,
Pudong New District
Shanghai, 201203- China
Tel.: 400 821 8006 [email protected]
INDIA
VWR Lab Products Private Limited
No.139. BDA Industrial Suburb,
6th Main, Tumkur Road, Peenya Post,
Bangalore, India – 560058
Tel.: +91 80 28078400 [email protected]
KOREA
Avantor Performance Materials
Korea Ltd
2F ACE Gwanggyo Tower I,
Daehak 4ro 17
Yeongtong-gu Suwon,
Korea 16226
Tel.: +82 31 645 7256 [email protected]
MIDDLE EAST & AFRICA
VWR International FZ-LLC
Office 203, DSP Lab Complex,
Dubai Science Park,
Dubai, United Arab Emirates
Tel: +971 4 5573271
SINGAPORE
VWR Singapore Pte Ltd
18 Gul Drive
Singapore 629468
Tel: +65 6505 0760 [email protected]
GO TO VWR.COM
FOR THE LATEST NEWS, SPECIAL OFFERS AND DETAILS FROM YOUR LOCAL VWR SUPPORT TEAM
©2021 VWR ZPROVWRI36086-EN
advertisement
Key Features
- Large, easy-to-read display
- Simple user interface
- NIST-traceable certificate of calibration
- Variety of calibration modes
- Wide range of applications
Related manuals
Frequently Answers and Questions
What is the accuracy of the device?
What is the resolution of the device?
What is the range of the device?
What is the temperature range of the device?
What is the humidity range of the device?
advertisement