Overview
■
■
■
■
■
4096 × 3000 px
Sony IMX253
1.1″ CMOS
69 fps
10 GigE
Industrial cameras / LX series
VLXT-123M.FO
Gigabit Ethernet, 12,3 Megapixel, Monochrome
Article number: 11208342
Technical data
Sensor information
Sensor
Mono/Color
Sensor type
Shutter type
Resolution
Pixel size
Exposure time
Sony IMX253 Gen2
Mono
1.1″ CMOS
Global shutter
4096 × 3000 px
3.45 × 3.45 µm
0.001 … 60000 ms
Data quality (EMVA 1288 typical)
Dark noise 2.15 e-
Saturation capacity
Dynamic range
9145 e-
70.2 dB
Signal-to-noise ratio
Quantum efficiency
Acquisition formats
Image formats, interface frame rate max.
39.6 dB
65.2 % @ 536 nm
Full Frame, 4096 × 3000 px, max. 69 fps
Binning 2×2, 2048 × 1500 px, max. 135 fps
Binning 2×1, 2048 × 3000 px, max. 69 fps
Binning 1×2, 4096 × 1500 px, max. 69 fps
Full Frame, 4096 × 3000 px, max. 69 fps Image formats, aquisition frame rate max. (Burst
Mode)
Pixel formats Mono8
Mono10
Mono12
Mono12 Packed
Image preprocessing
Analog controls
Color models
Camera features
Basic Functions
Auto Functions
Image Pre-processing
Acquisition / Interface
Synchronization
Trigger sources
Gain (0 … 48 dB)
Offset (0 … 255 LSB 12 Bit)
Mono
Exposure
Gain / Color Gain
Trigger / Exposure Active (Flash)
Binning 2x2
Partial Scan
Offset
Free Running Mode (Live Image)
Multi ROI
Exposure Auto
Gain Auto
Image Flipping (X/Y)
LUT / Gamma
Shading Correction
Edge Sharpening
Noise Reduction
Burst Mode
Adjustable Framerate
Short Exposure Time Enable
Device Link Throughput Limit
Internal Image Buffer free running trigger
Hardware
Software
ActionCommand www.baumer.com
Data sheet – VLXT-123M.FO
Page 1 of 3
Industrial cameras / LX series
VLXT-123M.FO
Gigabit Ethernet, 12,3 Megapixel, Monochrome
Article number: 11208342
Technical data
Camera features
Trigger delay
Process Synchronization
Time synchronization IEEE
1588
Additional Functions
Sequencer
Sequencer parameter
Internal image buffer
0 … 2 sec, tracking and buffering of up to
256 trigger signals
Events
Timer
Trigger Delay
Debouncer
Counter
Sequencer
Trigger via Action CMD (GigE)
Action CMD Request ID
Trigger ID inside Chunk
Additional Output Modes (e.g. Trigger
Ready)
PWM (PWM Duration / PWM Duty Cycle)
Selectable Output format (e.g. Tri State,
Push Pull)
Chunk data inside transferred image
Encoder support via Counter End trigger source
4 power outputs with up to 120 W (max.
48 V / 2.5 A)
IEEE 1588 / Master and Slave function
IEEE 1588 / Scheduled Action CMD
IEEE 1588 / Synchronized Acquisition
Framerate
User Set
Integrated temperature sensor
Readable additional information (e.g.
sensor information)
Save Custom Data
Automated control for series of images using different sets of parameters
Exposure time gain factor output line
ROI Offset x
ROI Offset y
1024 MB
84 images (Trigger Mode)
1 image (Free Running Mode)
Interfaces and connectors
Data interface
Process interface
10 Gigabit Ethernet, Transfer rate 10000
Mbits/sec, Connector: SFP+ cage
M12 / 12 pins a-coded (SACC-CI-
M12MS-12CON-L180) via M12/12 pins a-coded Power supply
Mechanical data
Lens mount
Width
Height
Depth
Weight
Material
Electrical data
Voltage supply range +Vs
Power consumption
Non-volatile memory
Flash memory size
Environmental conditions
Operating temperature
Humidity
Protection class
C-mount
60 mm
60 mm
79.6 mm
≤ 415 g aluminum
12 … 24 V DC (external power supply) approx. 7.2 W @ 12 VDC and 46 fps
128 kB
0 … +65 ° @ T = measurement point
10 … 90 % (non-condensing)
IP 40
IP 54 (with mounted tube and cable)
IP 65 (with mounted tube and cable)
IP 67 (with mounted tube and cable)
Digital I/Os
Lines 2 input lines
4 power output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A)
RS232
Conformity
Conformity CE
RoHS
UL recognized www.baumer.com
Data sheet – VLXT-123M.FO
Page 2 of 3
Dimension drawing
Industrial cameras / LX series
VLXT-123M.FO
Gigabit Ethernet, 12,3 Megapixel, Monochrome
Article number: 11208342
Principle www.baumer.com
Data sheet – VLXT-123M.FO
Page 3 of 3
