Learning Resources Pumping Heart Model Guide

Learning Resources Pumping Heart Model is a hands-on tool that helps students visualize blood flow through the heart and lungs. It features a transparent design that allows students to see the heart's chambers, valves, and vessels, and a hand pump that simulates the pumping action of the heart. The model also comes with reproducible pages that reinforce anatomical structure and key vocabulary. Great for grades 3 and up.

PDF
Document
Learning Resources Pumping Heart Model Guide | Manualzz

Publicité

Publicité

/

Publicité

Foire aux questions

A hands-on model used to teach students about the structure and function of the human heart and blood flow.

Ages 8+ for activity guide and Grades 3+ for the model itself.

The red powder is a safe, food-grade dye used to create simulated blood for the model.

The model is designed to use 75 ml of water, with a minimum of 40 ml and a maximum of 120 ml for proper performance.

Follow the steps provided in the manual to drain the water using a small Phillips screwdriver, over a sink or bucket to prevent staining.

A small Phillips screwdriver is required to remove the screws from the rubber stopper on the back of the model.

Clean the outer surface with a damp, soft cloth, avoid cleaning solvents, excessive force on the hand pump, bending or pulling the tubing, and accessing the inner casing.

The average adult heart rate is between 70 to 80 beats per minute.

Oxygen-rich blood from the lungs enters the left atrium, passes through the mitral valve to the left ventricle, which then contracts and pumps the oxygenated blood to the rest of the body.

Préparation du document pour l''impression…
0%