UCLA School District Portal Data Management System User's Manual

DRAFT
US-EDI
Early Development Instrument
A Population Based Measure for Communities
School District Portal
User’s Manual
The UCLA Center for Healthier Children, Families and Communities, under license from McMaster
University, is implementing the Early Development Instrument with its sub licensees in the US. The EDI
is the copyright of McMaster University and must not be copied, distributed or used in any way without
the prior consent of UCLA or McMaster University
For questions regarding licensing, email: [email protected]
© McMaster University, The Offord Centre for Child Studies
January 12, 2010
CONTENTS
1. US-EDI System Overview ........................................................................................................ 2 1.1) Users.................................................................................................................................................. 3 1.2) Roles.................................................................................................................................................. 3 1.3) Data Structure and Flow................................................................................................................... 6 2. Accessing the EDI System ........................................................................................................ 7 2.1) Sending UCLA District Contact Information ................................................................................... 7 2.2) Registration E-Mail........................................................................................................................... 7 2.3) First Login......................................................................................................................................... 7 2.4) Entering District Portal ..................................................................................................................... 9 2.5) Accepting Electronic Consent to use the system............................................................................... 9 2.6) District Portal .................................................................................................................................. 10 2.7) Control Tabs.................................................................................................................................... 10 2.7.1) Profile Tab ...............................................................................................................................................10 2.7.2) Users Tab .................................................................................................................................................11 2.7.3) Data Tab...................................................................................................................................................11 2.7.4) Custom Questions Tab.............................................................................................................................12 2.7.5) Reports Tab..............................................................................................................................................12 2.7.6) FAQ Tab ..................................................................................................................................................12 2.7.7) Links Tab .................................................................................................................................................12 3. Entering Class Lists and Creating User Accounts............................................................... 13 3.1) Option 1: Uploading District Excel File Directly into District Portal............................................. 13 3.2) Option 2: Sending Excel File to UCLA via Email.......................................................................... 16 3.3) Option 3: Manually Entering District, School and Class Data........................................................ 17 4. Managing User Accounts ....................................................................................................... 22 5. Monitoring EDI Completion Rates ....................................................................................... 23 6. Accessing Resources and Reports.......................................................................................... 23 7. Conditions of Data Confidentiality and Sharing ................................................................. 24 Appendix A - EDI Data Template for District Upload into the US-EDI ............................................... 25 Appendix B – District Upload Data Schema.......................................................................................... 26 Appendix C - EDI Sample Data Spreadsheet for Input Data ................................................................. 27 Appendix D - State Codes ...................................................................................................................... 29 1. US-EDI System Overview
This User’s Guide describes the organization and the use of the web-based version of EDI
system, called the US-EDI.
The Early Development Instrument (EDI) is an instrument developed by Drs. Dan Offord and
Magdalena Janus of the School Readiness to Learn Project at the Offord Centre for Studies of
Child Studies, McMaster University. It has been licensed by UCLA for use in the United States
of America.
EDI measures children’s readiness to learn at school in five general domains identified in the
literature: physical health and well-being; social knowledge and competence; emotional
health/maturity; language and cognitive development; and general knowledge and communication skills. The instrument is completed by kindergarten teachers in the second half of a
school year.
The UCLA Center for Healthier Children, Families and Communities, under license from
McMaster University, is implementing the Early Development Instrument with its sub licensees
in the US. The EDI is the copyright of McMaster University and must not be copied, distributed
or used in any way without the prior consent of UCLA or McMaster University. The UCLA
Center for Healthier Children, Families and Communities is serving as the national repository of
the EDI data in the United States.
The EDI is part of a national initiative called Transforming Early Childhood Community
Systems (TECCS) which represents a partnership between UCLA Center for Healthier Children,
Families and Communities and the United Way Worldwide. TECCS is a system for identifying
local needs and crafting solutions in collaboration with local leaders—all while promoting
accountability and accelerating our national understanding of what’s needed to bring children to
school healthy and ready to learn. TECCS has three core components:
1. Mapping community school readiness needs using the Early Development Instrument
(EDI)
2. Working with Local Leaders to Develop and Implement Solutions
3. Accelerating knowledge and sharing best practices
For all questions including those regarding licensing, please email: [email protected].
The EDI has been in use in Canada since 1999 using a paper-based system and computerized
spreadsheets to collect and manage EDI data. The US-EDI is the electronic version of EDI which
uses web technology over the Internet. There are three types of users in the e-EDI: 1) District
Administrators; 2) District IT Administrators; and 3) Teachers. Users are identified by the
username (their unique e-mail address) and a confidential password.
In the US-EDI, the District Administrator arranges for and gathers data about the participating
Schools, Teachers and Students and has three options for loading this information into the USEDI District Portal (explained in detail later). The US-EDI performs certain consistency checks
and once the checks have passed successfully, the system is available to the Teachers. A
Teacher User Manual is available for all teacher related US-EDI data entry. The Teachers can
update the student EDI Questionnaires for their classes on-line.
School District Portal User’s Guide
Page 2
DRAFT January 12, 2010
The US-EDI offers considerable flexibility for data entry and management. Data can be entered
in various stages so that the teacher is not required to complete everything in one session. Data
entry is intuitive requiring very little typing skills or knowledge of computers.
When the records for a specific student are completed, the teacher indicates this by clicking on
Lock the Record, which prevents any further modifications to it. When all records have been
locked, the EDI Statistician can export data for analysis.
If for some reason the teacher decides to go back and alter any data already locked, he/she must
contact the EDI District Administrator, who has the option of Unlocking records for further
changes. The District Administrator, however, cannot alter any records.
Several summary reports are available online to review the records for an individual student, a
class, or a school. The class summary report and the school summary report provide a quick
indication of what percentage of data has been completed. This allows the District Administrator
and the EDI District Administrator to monitor progress easily.
Once data has been collected and exported, the EDI Statistician performs data analysis. The
following fall, each District is provided with confidential individual school level reports (for
schools with more than one classroom) and a copy of the community profile which is a publicly
available report.
1.1) Users
There are three types of users in the e-EDI, District Administrators, District IT
Administrators and Teachers. Each category can have multiple individuals with their own
usernames. Users are identified by the username (their unique e-mail address) and a password.
Passwords can only be changed by the users. If the user forgets his/her confidential password,
the login will fail, but the system will offer to mail a temporary password by e-mail, which must
be changed upon first login. The EDI District Administrator can also initiate e-mailing the
password to a teacher.
The District Administrator has access to all administrative screens in the system, except EDI
Questionnaire entry screens, while the Teacher has limited access only to his/her own classes of
students. The Teacher can enter EDI Questionnaire data for his/her students. The Teacher can
also add new students.
1.2) Roles
The District Administrator’s and District IT Administrator’s roles are to:
1.2.1) Accept (or Not Accept) the electronic consent/agreement/certification to adhere to
conditions of the license. Only those who consent can proceed to use the e-EDI system.
Users view and print the consent form with the name of district and name of district
administrator uploaded into form.
School District Portal User’s Guide
Page 3
DRAFT January 12, 2010
1.2.2) Register their district level information: Full contact information for district level EDI
Administrator (required), district IT contact, and research staff contact (optional);
languages required for EDI parent consent forms; and other basic district level.
1.2.3) View and print various EDI resources.
1.2.4) Customize 5 blank questions at end of survey (with the understanding that the response
options would need to be pre-set and remain the same).
1.2.5) Prepare the district and teacher class lists for teacher data entry using ONE of three
options:
a. District performs an automated upload of district excel file directly into District Portal
(school, teacher and child level data) ;
b. District sends excel file to UCLA via email (school, teacher and child level data);
c. District Administrator enters school and teacher information and then teachers enter
child level information at a later date.
1.2.6) After the selection is made under 1.2.5, the system will lead the District Administrator
through the requisite prompts, as applicable, to make the system ready for teachers.
(e.g. Data upload prompts, auto-generated emails requesting data transfer to UCLA, or
instructions emailed to all participating teachers on how to enter the student class list
data.
1.2.7) View/Edit information about District, Schools, Teachers, Classes, and Students.
1.2.8) Status reports on EDI completion rates by school, class, and teacher.
1.2.9) Ability to query in reports for specific schools, classrooms and teachers.
1.2.10) EDI Certificate/Thank you memo auto generated when all data from project is complete
and submitted.
1.2.11) Access links to web for national project information and resources.
1.2.12) View/print School Reports and Community Profile report generated and posted by
UCLA Center for Healthier Children, Families and Communities.
The Teacher’s roles are limited to:
1.2.13) Teachers enter the Teacher Portal using their username and passwords provided by the
District Portal
1.2.14) Accept (or Not Accept) the electronic teacher consent form. Only those who consent
can proceed to use the e-EDI system. Users view and print the consent form with the
name of district and name of district administrator uploaded into form.
1.2.15) View and print various EDI resources.
1.2.16) Completion of EDI questionnaires. If the district chooses option (a) or (b) from 1.2.5
listed above to enter the class list, then teachers can proceed to view and use their class
list preloaded by the district to complete and EDI on each child in their class. If the
district chooses option (c) from 1.2.5, then the teacher will first need to build their own
student class list from scratch and then complete an EDI on each child in their class.
Building a class list requires that the teacher enter each child’s Student ID, School
name; Teacher name (or ID); and Class name (or ID).
1.2.17) Create additional student records
1.2.18) Review the EDI questionnaire data entered for a student in summary form.
1.2.19) Review class data to determine which student records have been completed and which
are yet to be entered.
School District Portal User’s Guide
Page 4
DRAFT January 12, 2010
1.2.20) Lock student EDI questionnaires to indicate that no more changes will be made and the
questionnaires are now available for export and analysis.
1.2.21) Change his/her own password.
1.2.22) Fill out Teacher profile and feedback form
School District Portal User’s Guide
Page 5
DRAFT January 12, 2010
1.3) Data Structure and Flow
The hierarchy of data in the e-EDI is illustrated in Figure 1. Each box represents a screen and
how it relates to the next or previous screen. US-EDI allows easy navigation through this
hierarchy as most screens have buttons to go to the lower level or the higher level screens.
Lower level data can exist only if the parent is present, i.e. the District must exist before School
data for that District can be entered.
District
There can be multiple
Districts
School
Each District can have many
schools
Each school can have
multiple teachers
Teacher
Teacher
Feedback
Form
Each teacher has one
teacher profile and may have
multiple classes
Class
Each class has many
students
Child
Checklist
Each child can have only
one EDI questionnaire
(with 6 sections)
Section A
Section B
Section C
Section D
Section E
Fig. 1 - Hierarchy of data in e-EDI
Please Note: Deleting data at any level, automatically deletes all the lower level data. For
example, if you delete a teacher, all the related classes, Children and their EDI data is deleted.
Use Deletion with great care.
School District Portal User’s Guide
Page 6
DRAFT January 12, 2010
2. Accessing the EDI System
2.1) Sending UCLA District Contact Information
In order to generate a user account for the District Administrator and the District IT
Administrator, it is first necessary for the District to send UCLA the relevant District Contact
Information: full names, email addresses, and phone numbers from each school district
administrator. Please send this information to [email protected].
2.2) Registration E-Mail
After UCLA has created the District Administrators’ user accounts, the District Administrators
will receive an e-mail at the e-mail address provided to UCLA with a temporary password:
In the email, a link is provided to access the e-EDI along with the requisite username and
password. The username is the individual’s email address. The password is temporary and must
be changed upon first login for security reasons.
2.3) First Login
The first time you log in, you can use the link provided in the registration email. For all
subsequent logins, you can access the e-EDI system through the World Wide Web by typing in
the URL:
http://usedi.ucla.edu/admin
This will open up the Administrative Section US-EDI.
Click on Login button on the far right (see next page).
School District Portal User’s Guide
Page 7
DRAFT January 12, 2010
The buttons on the top left provide more detailed description of the US-EDI system and
additional resources and assistance available to you:
Use your e-mail address and password
from the e-mail you received to login,
If you did not receive the e-mail or
misplaced it, you can type your e-mail
address in the box above and the
system will re-assign you a temporary
password, which will be e-mailed to
you.
On your first login, you will be asked
to change your password. Choose this
password carefully (something easy to
remember, but difficult for others to
guess).
School District Portal User’s Guide
Page 8
DRAFT January 12, 2010
The next step for the first time user is to read and complete the Electronic Consent to use the
system, which is automatically presented on the first login after you have selected the district.
2.4) Entering District Portal
Select the desired district, from the drop-down list of district(s) available to you, as follows:
2.5) Accepting Electronic Consent to use the system
The first time only, when you select a District, you will be presented a Consent Form, which you
need to read and accept before you can access the US-EDI system:
School District Portal User’s Guide
Page 9
DRAFT January 12, 2010
2.6) District Portal
You are now ready to work in the District Portal. This is also where you will find yourself on
your subsequent logins as the Consent Form is presented only once for each District.
When finished, please click on Logout (top right). If there has been no activity for 15 minutes,
the system automatically saves any changes made and closes the session for security reasons.
2.7) Control Tabs
Note the control Tabs available to the District Administrator to drill down into various options:
2.7.1) Profile Tab
Profile Tab simply shows basic
information about the current District.
The IDs in this tab are generated by
UCLA.
Please take a note the “District ID” as
you will need to use this ID during the
data upload process discussed later.
Later in this manual we’ll show you
how to edit the district name and state
information.
School District Portal User’s Guide
Page 10
DRAFT January 12, 2010
2.7.2) Users Tab
The Users Tab lists the user accounts that have been set up for the district. This is also where
new user accounts are created and changed (added, edited, locked, etc). Though user accounts for
teachers are listed and managed here, teachers do not have access to the District Portal. Only the
District Administrator and the District IT Administrator have access to the District Portal.
(Later, this manual reviews how the District Administrator can create new or edit existing users
at various levels, activate/inactivate them and reset their passwords, if necessary).
2.7.3) Data Tab
Data tab enables you to view and edit the schools and classes, e.g. This is also the tab that will
be used to upload class lists (discussed later)
School District Portal User’s Guide
Page 11
DRAFT January 12, 2010
2.7.4) Custom Questions Tab
This tab enables the District Administrator to enter up to five questions specific to this distract
that will be presented to the teachers under Section E of US e-EDI questionnaires. For each
question, it is possible to select the type of responses to be presented, ranging from a simple
Yes/No response to selecting a number from 1 to 10, as illustrated below:
2.7.5) Reports Tab
Reports tab will provide access to future reports
(under construction).
2.7.6) FAQ Tab
Frequently Asked Questions (FAQ) with answers will be available under this tab.
(under construction).
2.7.7) Links Tab
This tab will provide useful links to EDI related websites and resources.
(under construction).
School District Portal User’s Guide
Page 12
DRAFT January 12, 2010
3. Entering Class Lists and Creating User Accounts
Districts prepare teacher class lists for teacher data entry using ONE of three options:
1. District performs an automated upload of district excel file directly into District Portal
(school, teacher and child level data);
2. District sends excel file to UCLA via email (school, teacher and child level data);
3. District data enters school and teacher information in the District Portal and then teachers
enter child level information at a later date in the Teacher Portal.
These three methods are described in detail below.
3.1) Option 1: Uploading District Excel File Directly into District Portal
Data on schools, teachers, classes and children can be prepared by the District using an Excel
Spreadsheet provided in the District Portal. The excel spreadsheet is created by the district using
a local computer and then visually verified and saved before it is uploaded into the US-EDI
system. You must have Microsoft Excel (v. 2003 or higher) installed on your computer to work
on the spreadsheet. By uploading the excel file, the US-EDI system will create user accounts
and class lists for all the participating teachers.
This process involves downloading the template spreadsheet, filling it out, saving it locally and
then uploading it into the US-EDI:
Step 1: Download the template of the blank spreadsheet that includes data headings from the
US-EDI website. Login to the website as a District Administrator or District IT
Administrator and click on Data tab:
School District Portal User’s Guide
Page 13
DRAFT January 12, 2010
This will open the data management screen.
Click on Import button then the Download Template button to initiate download:
Depending upon the web-browser you are using, you will get an opportunity to open the
template (provided you have Microsoft Excel installed), or to save it in a desired location.
When you open the spreadsheet, you will see a blank spreadsheet with the following
column headings (see a larger picture in Appendix A):
If you click on the Schema tab, you will open another spreadsheet which is the data
dictionary and provides details on each data item, coding scheme, etc. Please refer to
Appendix B for the District Upload Data Schema.
School District Portal User’s Guide
Page 14
DRAFT January 12, 2010
Step 2: Complete the excel spreadsheet filling out data under each column ensuring that
correct codes are used. The data items are describe in detail in a Data Dictionary in
Appendix B.
The Teacher E-Mail (t_email) is critical as it will be used as a login ID to create teacher
user accounts However, all other fields can be edited or corrected later.
An example of a small completed Spreadsheet appears in Appendix C.
Step 3: Upload the excel spreadsheet into US-EDI system.
Login as District Administrator (or District IT Administrator) and select the District for which
you wish to upload the data.
Here are some important things to know about the upload process:
1. In order for uploaded data to be correctly linked to your district, please ensure that the
district_id column in the spreadsheet corresponds to the code found in the District Profile
screen (see Section 2.7.1).
2. The upload process checks to see if a Teacher has already been registered into e-EDI. If
not, the system creates a new Teacher ID (the Teacher’s E-Mail address) and password
and automatically mails to invitation to the teacher to login to e-EDI.
3. If the upload process finds a school, teacher, class or student already in the system, it
simply overwrites the data with the new information.
4. If there is other new information (school, class, students), then those records are simply
inserted.
School District Portal User’s Guide
Page 15
DRAFT January 12, 2010
5. The upload process never deletes any data records.
6. After the upload is completed, US-EDI provides a summary indicating how many records
were processed and if any errors were found.
7. In case of any errors, simply correct the erroneous records and repeat the upload process.
Data records will not be duplicated as a result of multiple uploads; they would simply be
replaced by new information.
3.2) Option 2: Sending Excel File to UCLA via Email
(School, teacher and child level data)
If you are unsure of loading the data yourself or have technical problems you are unable to
resolve with the technical help available to you, simply email the excel spreadsheet as an
attachment and any pertinent information to the US-EDI team at UCLA at the following e-mail
address: [email protected]
The US-EDI team will review the spreadsheet for data consistency and upload it on to the
system. You will receive an e-mail message confirming the status of your data.
School District Portal User’s Guide
Page 16
DRAFT January 12, 2010
3.3) Option 3: Manually Entering District, School and Class Data
This method is practical for small districts only as it requires considerable manual data entry;
however, it is quite straightforward and intuitive.
Make sure you have collected and organized all the relevant data you would need to enter into
the system. This will include all the same information Schools, Classes, Teachers and Students.
It would be the same information that is loaded through the spreadsheet (see Appendix B for a
list and description of data items).
It is, however, possible to leave the student level data entry to the teachers, though this does
significantly increase teacher data entry time before they are able to begin completing an EDI on
each student in their class.
Here the steps you need to follow to enter data online:
Step 1: Login to US-EDI using the following web address:
http://usedi.ucla.edu/admin
Step 2: Open the District Portal and select the School District you wish to enter data for:
Verify that you have the selected the correct District in the District Portal (in case you have
access to multiple districts):
School District Portal User’s Guide
Page 17
DRAFT January 12, 2010
Step 3: Follow the steps illustrated below to create a School:
This opens a pop-up screen to enter details about the new school:
School District Portal User’s Guide
Page 18
DRAFT January 12, 2010
Step 4: Follow the steps illustrated below to create a Class:
Fill in the pop-up screen with the details of the class:
School District Portal User’s Guide
Page 19
DRAFT January 12, 2010
Step 5: Follow the steps illustrated below to create a Teacher:
Note:
If you check ; on Send Activation Email, a message will be sent out to the Teacher inviting
her/him to login and start entering EDI data. You may wish to wait until all data has been
created and verified before you activate the teachers at a later time.
School District Portal User’s Guide
Page 20
DRAFT January 12, 2010
Step 6: Follow the steps illustrated below to create a Student (Child). Reminder; It is, possible
to skip this section and leave the student level data entry to the teachers, though this does
significantly increase teacher data entry time before they are able to begin completing an EDI on
each student in their class.
File out the pop-up screen for each child to be added:
School District Portal User’s Guide
Page 21
DRAFT January 12, 2010
4. Managing User Accounts
The District Administrator can create and manage teacher accounts, as described in
Section 3.3 in Step 5.
Once a Teacher has been created, the District Administrator can make the following changes
using the steps illustrated in the picture below:
1. Lock out a Teacher and Unlock as needed.
2. Activate a Teacher, which sends an automatic e-mail to the Teacher with instructions and
password.
3. Change Teacher’s name, contact number and school assigned to the teacher.
4. Re-assign permission from one school to another.
The Teacher’s e-mail address cannot be changed as it acts a primary identifier for the Teacher.
Please note: Current design of US-EDI does not allow a Teacher to have access to multiple
schools. If a teacher does teach at multiple schools, the only workaround would be to use a
different e-mail address for the teacher in order for them to access the other school(s).
School District Portal User’s Guide
Page 22
DRAFT January 12, 2010
5. Monitoring EDI Completion Rates
(To be added)
6. Accessing Resources and Reports
(To be added)
School District Portal User’s Guide
Page 23
DRAFT January 12, 2010
7. Conditions of Data Confidentiality and Sharing
Student IDs, child date of birth, and home address are collected, however they are only used for
internal purposes and never reported out to any group. The student IDs and the DOB are used to
facilitate teacher data entry since these variables are uploaded by the district in the US-EDI
software for teachers to access as class lists when they log in to the teacher portal using their
secure and confidential password. The child’s home address is uploaded into the US-EDI
software by the district and used by UCLA to generate aggregated GIS maps of the EDI data.
A few other notes on appropriate uses of the data:
•
•
•
•
No child names are ever collected in the system.
Teacher names and emails are collected but are never accessible to UCLA. They are only
accessible in the system by the districts and teachers.
UCLA only reports data in aggregate for groups of children - data is never report on
individual children or classrooms.
UCLA will upload the data to conduct the data analysis and provide aggregated
information at the school, district, and community levels of aggregation. Data will not be
reported at the individual child, class or teacher level. School data will only be reported
in schools with more than one participating class.
•
Data files will be kept in a secure, password-protected location at the UCLA Center for
Healthier Children, Families and Communities.
•
UCLA will provide the de-identified data file (stripped of any unique identifiers to the
publishers of the EDI, at the Offord Centre for Child Studies at McMaster. The Offord
Centre maintains the international repository for analysis and research involving only
high levels of aggregation. The data is stripped of the student ID, date of birth (replaced
with age) and address information (replaced with a geocoded variable).
•
UCLA will upon request, provide the district (which has capacity to keep the data
confidential and secured in accordance with applicable privacy laws and regulations),
with the de-identified data file relating to individual EDI scores, free of charge.
•
UCLA will not provide the de-identified data to any other party (except the District and
the Offord Centre) without the prior consent of the district and the UCLA IRB.
School District Portal User’s Guide
Page 24
DRAFT January 12, 2010
Appendix A - EDI Data Template for District Upload into the US-EDI
An electronic version of an empty spreadsheet, the EDI Data Template, can be downloaded from the US-EDI by clicking on the
Download Template button in the Data Import screen. See Section 3.1 for further details.
Please refer to Appendix B for the District Upload Data Schema for a data dictionary (or schema) which provides details on each data item, coding
scheme, etc.
Once the template is downloaded, this spreadsheet can be filled out by the district and then uploaded directly into US-EDI system. Alternatively, it
can be e-mailed to UCLA for uploading into e-EDI. Emails should go to [email protected]
An example of a filled out spreadsheet ready for import is shown in Appendix C.
Note: This Excel spreadsheet is slightly modified so that headings appear vertically to print it on a single page.
School District Portal User’s Guide
Page 25
O
P
Q
sick_sd
N
absences_sd
M
dob_sd
L
zip_exten_sd
K
zip_sd
J
res_city
I
res_address
H studentid
G
classtime_sd F
school_type_
if
t_lastname
E
school_type class_id
school_r
D
t_email
C B
district_id
A
t_firstname
EDI Data Template
DRAFT
Appendix B – District Upload Data Schema
School District Portal User’s Guide
Page 26
DRAFT
Appendix C - EDI Sample Data Spreadsheet for Input Data
This is an example of a data spreadsheet filled out by the District Administrator, consisting of two schools, teachers, classes and students from a
single District. All data must be carefully entered and must be complete and error-free before a successful import can be done.
The spreadsheet is split over two tables in order to print it on paper.
Sample Excel Spreadsheet for data import:
A
district_id
12
12
12
12
12
12
12
13
B
school_r
Test Data School 1
Test Data School 1
Test Data School 1
Test Data School 1
Test Data School 1
Test Data School 1
Test Data School 1
Test Data School 2
I
classtime_sd
1
1
2
3
4
4
1
1
J
studentid
1
2
3
1
1
2
1
1
School District Portal User’s Guide
C
class_id
1
1
1
2
3
3
1
1
D
E
school_type school_type_specify
2
2
2
9
tester
3
3
1
1
F
t_lastname
Tenace
Tenace
Farago
Farago
Renner
Renner
Farago
Smith
G
t_firstname
Sabrina
Sabrina
Leslie
Leslie
Andrew
Andrew
Leslie
John
H
t_email
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
K
res_address
12 Juniper
test
tester
L
res_city
Stoney Creek
tester
tester
M
zip_sd
12345
12345
12345
N
zip_exten_sd
123
123
123
O
dob_sd
13-11-2009
01-01-2000
01-11-2000
13-12-2002
P
absences_sd
1
1
1
Q
sick_sd
2
1
0
tester
tester
12345
123
01-01-2000
1
1
Page 27
DRAFT
Appendix D - State Codes
01 = Alabama
02 = Alaska
04 = Arizona
05 = Arkansas
06 = California
08 = Colorado
09 = Connecticut
10 = Delaware
11 = District of Columbia
12 = Florida
13 = Georgia
15 = Hawaii
16 = Idaho
17 = Illinois
18 = Indiana
19 = Iowa
20 = Kansas
School District Portal User’s Guide
21 = Kentucky
22 = Louisiana
23 = Maine
24 = Maryland
25 = Massachusetts
26 = Michigan
27 = Minnesota
28 = Mississippi
29 = Missouri
30 = Montana
31 = Nebraska
32 = Nevada
33 = New Hampshire
34 = New Jersey
35 = New Mexico
36 = New York
37 = North Carolina
Page 29
38 = North Dakota
39 = Ohio
40 = Oklahoma
41 = Oregon
42 = Pennsylvania
44 = Rhode Island
45 = South Carolina
46 = South Dakota
47 = Tennessee
48 = Texas
49 = Utah
50 = Vermont
51 = Virginia
53 = Washington
54 = West Virginia
55 = Wisconsin
56 = Wyoming
DRAFT
">