Thermoworks_Industrial_Cat
THERMOMETRY FOR INDUSTRY & SCIENCE
SPLASH-PROOF SUPER-FAST THERMAPEN™
Professional Thermocouple
• 3-second readings!
• Improved accuracy and durability
• Water-resistant design
• Biomaster anti-bacterial additive
• °F to °C reconfigurable
• 0.1° resolution full range to 572°F
• Auto on/off—no buttons!
• 1,500 hour battery life
Rotating hub with robust
switching mechanism
Biomaster anti-bacterial additive molded
into case inhibits bacterial growth
Molded-in, flush window prevents leaks and grime traps
5" SST probe folds
away for protection
Reduced tip ultra-fast
Thermocouple design
for industry-leading
3 second response
New water-resistant enclosure
with integrated rubber seals
Larger easy-to-read digits
Customize Display
0.1° or 1° Increments and °C or °F
Configuration Settings
in battery compartment
include calibration tuning
and disabling the auto-off
The Super-Fast Thermapen has
been a favorite among restaurant
chains, health inspectors, labs,
plants and quality managers worldwide. Hundreds
of thousands are in use. The clever fold-away probe
and the simple pocket design replace more costly
and bulky handheld thermometers while using the
same professional thermocouple technology. This
new generation Thermapen introduces a robust,
splash-proof design with molded-in seals to protect
the thermometer from wet hands and splashes.
Speed & Accuracy
Even more accurate than before and slightly faster!
Our proprietary circuit yields accuracies better than
±0.7°F. That includes all errors! (many competitors
don’t include the probe error in their spec.) Each
unit comes with a NIST-Traceable certificate of
calibration showing test results for the individual
thermometer. Resolution is now 0.1° over the full
range. Improvements in the probe technology now
yield a blazing fast speed of 3 seconds to a full
temperature reading.
No Cables!
The components most likely to fail in a commercial
thermometer are the cable and its connector. Also,
the typical handheld meter and probe combination
requires two hands. What do you do with the cable
when you’re through with it? The competition want
you to wrap it around the meter, which is time
consuming and a natural trap for grime and bacteria!
The one-handed Thermapen eliminates frayed
cables, snags, germ traps and wasted time while
freeing your second hand.
Simple Operation
Just open the probe and the Thermapen comes on.
Close it and it shuts off. No buttons or switches
to catch germs, confuse staff and cause errors.
Configuration settings in the battery compartment
1 | Industrial Catalog
Probe Folds Into
Protective Slot
Battery cover is tethered
so it will never get lost
Personalize user settings: °C/°F,
Resolution (0.1° or 1°), and Auto off
Probe clips into place
when not in use
No buttons to press or learn
makes staff training a breeze
allow management to easily set the Thermapen for
°C or °F, read in tenths or whole degrees (0.1° or
1°), and disable the auto-off for continuous readings
till the probe is closed. Although likely to never
be needed, a calibration trim button fine-tunes the
Thermapen calibration at a single temperature such
as an ice-bath.
Incredible Value
The closest commercial competition for the
Thermapen sells for about $200. Other meter and
probe combinations sell for up to $250! In most
cases, you can buy a whole new Thermapen for
about the price the competition charges for just a
replacement probe. Compare speed, convenience,
accuracy and the new durability of the Splash-Proof
Super-Fast Thermapen and you’ll see how you can
save significant money while improving your own
product quality.
www.thermoworks.com
1-800-393-6434
SPLASH-PROOF SUPER-FAST THERMAPEN™
Color Options
GRAY
$96 231-207
WHITE
$96 231-217
YELLOW
$96 231-227
GREEN
$96 231-237
RED
What is Biomaster?
Biomaster is an anti-bacterial additive mixed with the plastic before molding the Thermapen housings. It inhibits the growth of common bacteria (E.coli, Salmonella,
Listeria, and Staphylococcus). We
still recommend the Thermapen
body be cleaned and the probe
should be wiped before food use
but Biomaster will significantly reduce bacterial risk. Biomaster is
non-chemical and non-toxic to
humans and cannot contaminate
food or liquids.
$96 231-247
BLUE
$96 231-257
BROWN
$96 231-267
BLACK
$96 231-277
Independently certified for use in
and around foods.
Each Thermapen is traceable to
NIST and includes a certificate of
calibration with actual test data at
two temperatures, proving the accuracy of each Thermapen.
Specifications
-58.0 to 572.0°F (-49.9 to 299.9°C)
±0.72°F (±0.4°C) from -58 to 392°F
(-49.9 to 199.9°C)
Accuracy
±1.8°F (±1.0°C) from 392 to 572°F
(200 to 299.9°C)
From 75°F to 32°F: ≤ 3 seconds to within 1°F
Speed
0.1°F/°C full range (user reconfigurable to
Resolution
1.0°F/°C)
High performance type K thermocouple
Sensor
-4 to 122°F (-20 to 50°C)
Operating
(max. ambient limits of Thermapen body)
Temp.
CR2032 (3V) lithium coin cell x 2, 1,500 hours
Battery
10 minutes (user reconfigurable to disable
Auto-Off
auto-off)
0.55" (14mm) LCD
Display
6.1" (L) x 1.85"(H) x 0.75" (D)
Dimensions
153mm (L) x 47mm (H) x 19mm (D)
0.25 lbs. (97g.)
Weight
Calibration NIST-Traceable Certificate included
Range
ORANGE
$96 231-287
PINK
$96 231-297
PURPLE
$96 231-307
ORDER 6-UP: ONLY $80 EACH
Accessories
Zipper Wallet
$8 830-001
1-800-393-6434
Wall Bracket
$19 10203
Leather Wallet
$16 830-110-L
www.thermoworks.com
Silicone Boot
$6 830-260
Batteries (CR2032)
$4 839-195 2-pack
Industrial Catalog | 2
HANDHELD METERS
MTC
Mini Handheld Thermocouple Meter
Buy 5: $35 Each!
• Resolution to 0.1°C or °F
• Uses interchangeable type K
thermocouple probes
• Large LCD display
• IP65 splash resistant
• °C/°F switchable
• Magnetic back panel
Specifications
Range
Operating Temp.
Shown with 113-151
probe, 2 second response.
Our new Mini Handheld Thermocouple (MTC)
is water-resistant, lightweight, and includes
a type K thermocouple socket for use with
virtually any type K probe. The MTC has a
splash rating of IP65 so kitchen, lab or factory
use is no problem. With a large digit display
you’ll be able to read temperatures anywhere
in the kitchen. A magnetic back panel attaches
to any metal surface for easy mounting.
Accessories
Accuracy
Resolution
Battery
Auto Shutoff
Water Resistance
Dimensions
Weight
Probe
Units
Certificate
-83 to 1999°F / -64 to 1400°C
32 to 122°F / 0 to 50°C
1% of reading or 1°C/1.8°F whichever
is greater
0.1°C or °F
1 x CR2032 Lithium cell, 100 hours
After 45 seconds in HOLD mode, or 4
minutes in normal display mode
IP65
1.7" (W) x 0.79" (D) x 3.1" (L)
43mm (W) x 20mm (D) x 78mm (L)
1.42 oz. / 40.15 g.
Accepts type K probes with mini
connector. Probe not included.
Switchable °C or °F
Includes Certificate of Conformance
To Order
Thermocouple Probes
See pages 7-12
MTC Mini Handheld Thermocouple
MTC
830-001 Protective Zipper Wallet
Zipper Wallet
830-001
Thermamite 1: RTD Meter
Thermamite 5: Thermocouple Meter
$43
$8
• Thermocouple unit to 575°F (TM5)
• Platinum RTD sensor for higher accuracy (TM1)
• Handy size & big display
• 0.1° Resolution (TM1)
• Includes NIST-Traceable calibration certificate
Specifications
THERMAMITE 1 RTD (TM1)
-49.9 to 199.9°F / -49.9 to 199.9°C
Range
±0.9°F / 0.5°C, ±1 digit
Accuracy
Resolution 0.1°F or °C
100 ohm platinum RTD, 4.25"(L) x .125"(∅)SST
Probe
9V, 500 hours
Battery
Dimensions 4.76" (L) x 2.67" (W) x 1" (D)
Thermamite 1
Thermamite 5
Shown with optional rubber boot.
THERMAMITE 5 Thermocouple (TM5)
-25 to 575°F / -30 to 300°C
Range
±1%, ±1 digit
Accuracy
Resolution 1°F or °C
Type K Thermocouple, 4.25" (L) x .125" (∅)SST
Probe
9V, 500 hours
Battery
Dimensions 4.76" (L) x 2.67" (W) x 1" (D)
To Order Thermocouples are preferred in food and other
applications for their fast response and wide range.
The RTDs are chosen for applications where you can
trade a little speed for a bit more accuracy. Now you
can get a tough little thermocouple thermometer
(TM5) for just $49, including the probe! Or, get the
accuracy of a platinum RTD sensor (TM1) for only $59.
3 | Industrial Catalog
Limited Time Price!
262-551 Thermamite 1 °F RTD Meter, 0.1°F WAS $73
262-051 Thermamite 1 °C RTD Meter, 0.1°CWAS $73
Thermamite 5 °F Thermocouple Meter, 1°F
261-555
WAS $63
Thermamite 5 °C Thermocouple Meter, 1°C
261-755
WAS $63
830-230 Protective Boot for Thermamite Meters
832-120 Wall Bracket for Thermamite
www.thermoworks.com
$59
$59
$49
$49
$8
$12
1-800-393-6434
WATERPROOF THERMOCOUPLE METERS
Therma Plus / CaterTemp Plus
Rugged Waterproof Thermocouple Meters
• Includes Type K socket for replaceable probes
(Therma Plus)
• 1 second response for meter display (Therma Plus)
• IP66/67 waterproof rating
• Accuracy certified with NIST certificate of
calibration
• Extruded aluminum case for maximum durability
• 5,000 hour battery life
CaterTemp Plus includes fixed
Fast-Response type K probe.
Limited Time (Therma Plus):
FREE 303-159 Probe Included!
Therma Plus shown with 303-159
Fast-Response type K probe.
Specifications
Designed for harsh industrial environments, the
new Therma Plus and CaterTemp Plus are rugged,
waterproof, accurate and easy-to-use. Housed
in crushproof extruded aluminum and sealed
with rubber gaskets at the top and bottom of the
meters. Run over one with a truck and it would
survive! The Therma Plus is considered splashresistant and features a socket for interchanging
probes while the CaterTemp Plus comes with an
attached penetration probe making it even more
moisture-proof (no connector socket).
A Hold function locks readings for later. Meters
are factory-set for °F, but can be switched by the
user to °C with the front panel buttons. Digits are
large and easy-to-read. Accuracy is a phenomenal
0.4°C over a wide range with even better accuracy
below 100°C. The CaterTemp Plus features a
narrower range (limited by the probe) but includes
the probe error for better precision. Each unit is
individually calibrated and includes a NISTTraceable calibration certificate.
Accessories
Hard Case
10210
1-800-393-6434
Range
Accuracy
Probe
Resolution
Units
Response
Housing
Battery
Dimensions
Weight
Warranty
Calibration
Therma Plus
CaterTemp Plus
-148 to 2501°F / -100 -58 to 571.8°F / -50 to
to 1372°C
299.9°C
±0.5°F / ±0.28°C from 32 to 212°F / 0 to 100°C ;
±0.72°F / ±0.4°C, ±0.1% full range
Fixed type K
Interchangeable
thermocouple,
type K thermocouple,
.125" dia. x 4" (L),
mini socket
reduced tip
0.1/1°F/°C auto
0.1°F or °C full range
ranging at 299.9°F/°C
Switchable °C or °F
3 to 4 seconds
1 second for meter
to full reading
Extruded aluminum (IP66/67 rated)
9V, 5000 hours
4.5" (L) x 2.4" (W) x 1.4" (D)
115mm (L) x 60mm (W) x 35mm (D)
0.5 lb. / 244 g.
2 years for meter
NIST-Traceable Certificate included
To Order
Y-221-071
221-059
10210
832-150
Wall Bracket
832-150
www.thermoworks.com
Therma Plus, includes 303-159 probe
CaterTemp Plus with attached probe
ABS Carrying Case. Fits meter and probes
Wall Bracket for Therma Plus / CaterTemp
Plus
$189
$189
$29
$16
Thermocouple Probes (For ThermaPlus)
See pages 7-12
Industrial Catalog | 4
THERMOCOUPLE METERS—HIGH ACCURACY
MicroTherma 2K
MicroTherma 2T
Limited Time:
FREE 303-159
Probe Included!
Limited Time:
FREE 307-159
Probe Included!
Shown with 303-159
Fast Response type K probe.
Shown with 307-159
Fast Response type T probe.
• Meter accuracy to ±0.36°F / ±0.2°C
• Interchangeable type K thermocouples
• System cal feature to adjust for probe error
• Includes Hold, Max and Min functions
This is the highest precision thermocouple meter
on the market for less than $1,000. An auto self-cal
feature keeps the meter accurate. If you want to
maximize “system accuracy”, adjust the reading up
to ±2.5°C to offset for any probe errors. Resolution
is a solid 0.1°C or °F below 2000°. Auto-ranges to
1 degree above. Shown here in the type K model,
available in other types at thermoworks.com. Fully
featured including Hold, Min/Max, °C/°F switching,
and comes with a NIST-Traceable certificate.
• Type T thermocouples
• Meter accuracy to ±0.36°F / ±0.2°C
• Self-calibrating circuitry
• Includes Hold, Max and Min functions
• Switchable °C or °F
Like the 2K model at left but is used with precision
Type T thermocouples. Our standard Type T probes
are accurate to 0.2°C. We also offer precision probes
with accuracy to 0.1°C and an assortment of microsized needle and wire probes. Perfect for measuring
tiny subjects, small volumes, foods, biological
samples or pharmaceutical processes. Precision is
equal or better than systems costing hundreds more.
Excellent choice for process validation or research.
Specifications
Range
Resolution
Accuracy
Probe
Battery
Dimensions
Calibration
MicroTherma 2K
MicroTherma 2T
-328 to 2501°F / -200 to 1372°C
-346 to 770°F / -210 to 410°C
0.1° to 1999.9°, auto-ranging to 1° above 2000°
±0.36°F / 0.2°C, ±1 digit
Type K thermocouple
Type T thermocouple
2 x AAA, 1000 hours
2.87" (W) x 5.55" (H) x 1.38" (D) / 73mm (W) x 141mm (H) x 35mm (D)
NIST-Traceable Certificate included
Available in other thermocouple types.
see www.thermoworks.com/microtherma2
Accessories
To Order
Y-221-092
Y-227-193
834-100
830-205
830-300
830-302
MicroTherma 2K Thermometer + 303-159 Probe
MicroTherma 2T Thermometer + 307-159 Probe
Hard Case
Rubber Boot
.059"
Waterproof Pouch, for Type K probes
Waterproof Pouch, for Type T probes
3"
$169
$169
$20
$12
$37
$37
.029"
Thermocouple Probes
See pages 7-12
Hard Case
834-100
5 | Industrial Catalog
Rubber Boot
830-205
Waterproof Pouch
MicroTherma 2K: 830-300
MicroTherma 2T: 830-302
www.thermoworks.com
High Accuracy Type T Probes
±0.1°C accuracy (See page 12)
.028" Dia.
1-800-393-6434
THERMOCOUPLE METERS
Therma 3
Basic Thermocouple Meter
• Uses interchangeable type K thermocouples
• Wide range, rugged, and long-lasting
• Low $79 price beats the competition
• For a limited time, purchase a Therma 3 meter
and get a free Fast Response probe!
Limited Time:
$79 each &
FREE 303-159
Probe!
Specifications
Range
Resolution
Accuracy
-58 to 1832°F
1°F
±1%, 1 digit
Accepts type K probes with mini
connector.
9V, 200 hours
3.15" (W) x 5.78" (D) x 1.42" (L)
80 mm (W) x 147 mm (D) x 36 mm (L)
NIST-Traceable Certificate included
Probe
Battery
Shown with 303-159
Fast Response type K probe.
Dimensions
This professional thermocouple meter reads all type
K probes. Just switch it on and read the temperature.
Wall-mount bracket converts this meter into a lowcost dedicated monitor for ovens, walk-ins or test
stations. The optional rubber boot protects against
drop-damage. Order the waterproof pouch to make
the Therma 3 totally submersible!
Accessories
Hard Case
834-100
Rubber Boot
830-200
Calibration
To Order
Y-221-023
834-100
830-200
830-300
832-110
Waterproof Pouch
830-300
Food Check
Thermocouple Meter
NEW!
Therma 3+FREE 303-159 Probe WAS $95
Hard Case
Rubber Boot
Waterproof Pouch
Wall Bracket
Wall Bracket
832-110
-58 to 572°F
0.1°F
±0.7°F from -58 to 390°F
±1.8°F from 390 to 572°F
1/8" dia. x 5" L
3 x AAA, 10000 hours
1" x 2.2" x 5" / 25mm x 56mm x 128mm
NIST-Traceable Certificate included
Accuracy
To Order 830-253
1-800-393-6434
Wall Bracket
832-050
See pages 7-12
The new Food Check thermometer features higher
accuracy and an easy-to-grip handheld design. The
meter and probe are calibrated together to assure
precision better than 0.7°F. Simple operation
eliminates operator error - no extra buttons to
confuse staff. The attached thermocouple is a
tapered-tip general-purpose penetration probe to
deliver final readings as fast as 8 seconds in semisolids, liquids or air. Biomaster in the housing and
probe handle reduce contamination. Super-long
battery life.
Specifications
Probe
Battery
Dimensions
Calibration
Rubber Boot
Thermocouple Probes
• One-button operation - easy to use
• Includes attached type-K thermocouple
• Probe includes penetration tip
• High accuracy to ± 0.7°F for meter and probe
together
• Includes Biomaster anti-bacterial additive
• Optional rubber boot for protection
Range
Resolution
Accessories
$79
$20
$13
$37
$12
221-048
830-253
832-050
www.thermoworks.com
Introductory Price!
Food Check with attached probe, °F
Rubber Boot
Wall Bracket
$99
$12
$15
Industrial Catalog | 6
4" x 0.12" K & T
THERMOCOUPLE PROBES—TYPE
Ordering Probes
5" or 12" x 0.12"
The first digit of the part number (103-159 or 303-159) indicates
straight (1) or coiled (3) cable. All type K probes conform to an
accuracy of ±0.5°C from 0°C to 100°C, and type T probes are
accurate to ±0.2°C from -20°C to 70°C. Standard probe cable
length is 39" unless otherwise indicated. Most probes are available
in K type K or T type T thermocouple and are indicated in the
ordering information. Max temp shown for probe sheath.
4" L x 0.12" Dia
Penetration Probes
5" X 0.059" (1.5mm)
Max temp 482°F / 250°C
4" x 0.12" Dia.
5" L or 12" L x 0.12" Dia.
Fast Response Penetration Probe
Fast response reduced tip is ideal for liquids and semi solids
K 103-159 or 303-159 Fast Response Penetration Probe . . . $51
including fish and other delicate foods. 3-4 second response!
T 107-159 or 307-159 Fast Response Penetration Probe . . . $51
5" or 12" x 0.12" Dia.
Penetration Probe
Our penetration Probe is a strong and versatile pointed insertion
probe. Suitable for liquids and semi-solids. 12" length keeps operator
hands away from higher temperatures.
K
K
T
T
Max temp 482°F / 250°C
5" L X 0.059" Dia
8.66" x 0.177"
103-160 or 303-160 5" Penetration Probe . . . . . . . . . . . . .
103-168 or 303-168 12" Penetration Probe . . . . . . . . . . . .
107-160 or 307-160 5" Penetration Probe . . . . . . . . . . . .
107-168 or 307-168 12" Penetration Probe . . . . . . . . . . . .
$46
$55
$46
$55
Max temp 482°F / 250°C
5" x 0.059" Dia.
5" Penetration Probe
This general purpose probe is popular in the food industries. The 1/8"
diameter shaft is swaged to a smaller diameter and given a very sharp
tip for easy penetration in most semi-solids.
K
K
T
8.66"Probe,
L x 0.177"
Dia . . . . . . . . . . . . . . $51
103-100 5" Penetration
Flat Cable
303-100 5" Penetration Probe, Coiled Cable . . . . . . . . . . . . $51
107-100 5" Penetration Probe, Flat Cable . . . . . . . . . . . . . . $51
Max temp 482°F / 250°C
8.66" x 0.177" Dia.
Burger Probe
The Burger Probe is designed for the busy fast food kitchen. The disc
ensures the correct insertion depth (0.24") each and every time.
0.23" x 0.04" Dia.
K
T
0.47" Dia.
103-745 or 303-745 Burger Probe . . . . . . . . . . . . . . . . . . . $56
107-745 or 307-745 Burger Probe . . . . . . . . . . . . . . . . . . . $56
Max temp 662°F / 350°C
Max temp 482°F / 250°C
8" x 0.16" Dia.
78"
8" x 0.16" Dia.
78"
Smokehouse Probes
Stainless Armor - Penetration probe with stainless steel armor and 90 degree bend. 78" lead. Max temp 662°F.
Stainless Overbraid - Penetration probe with stainless steel overbraid and 90 degree bend. 78" lead.
5" x 0.12"
K
K
113-178 Stainless Armor Smokehouse Probe . . . . . . . . . . . $65
113-177 Stainless Overbraid Smokehouse Probe . . . . . . . . $52
Max temp 482°F / 250°C
2" x 0.04" Dia.
Mini Needle Probe
Great for very small samples, cooking meats or just speedy response
times. Readings take only 2–3 seconds. Teflon Cable.
K
K
T
113-181 Miniature Needle Probe, 39" Flat Cable . . . . . . . . . $42
113-182 Miniature Needle Probe, 78" Flat Cable . . . . . . . . . $48
117-181 Miniature Needle Probe, 39" Flat Cable . . . . . . . . . $42
Max temp 482°F / 250°C
5" x 0.12" Dia.
5" x 0.12" Dia.
K
Oven Cooking Probe
With or without a stainless steel handle, complete with 78" Teflon high
temp lead. Place in meats and close in oven. Max temp 482°F.
7 | Industrial Catalog
K
T
T
113-170 Oven Probe with SST Handle, 78" cable . . . . . . . .
113-173 Oven Probe, No Handle, 78" cable . . . . . . . . . . . .
117-170 Oven Probe with SST Handle, 78" cable . . . . . . . .
117-173 Oven Probe, No Handle, 78" cable . . . . . . . . . . . .
www.thermoworks.com
$80
$33
$80
$33
1-800-393-6434
THERMOCOUPLE PROBES—TYPE K & T
K
K
K
K
K
K
T
Heavy-Duty Penetration Probe
Available in different lengths and diameters. The larger diameter is
more rigid while the smaller diameter is faster. All have reduced tips
to improve response. Perfect for long reaches, deep containers, meat
processing.
T
T
T
K
T
Max temp 482°F / 250°C
113-124 or 313-124 5/32" dia. x 4"L . . . . . . . . . . . . . . . .
113-120 or 313-120 1/4" dia. x 12"L . . . . . . . . . . . . . . . .
113-125SP or 313-125SP . 1/4" dia. x 20"L . . . . . . . . . . . .
113-130 or 313-130 5/16" dia. x 20"L . . . . . . . . . . . . . . .
113-120-36 or 313-120-36 1/4" dia. x 36"L . . . . . . . . . . . .
113-135 or 313-135 3/8" dia. x 55"L . . . . . . . . . . . . . . . .
117-124 or 317-124 5/32" dia. x 4"L . . . . . . . . . . . . . . . .
117-120 or 317-120 1/4" dia. x 12"L . . . . . . . . . . . . . . . .
117-121 or 317-121 1/4" dia. x 20"L . . . . . . . . . . . . . . . .
117-122 or 317-122 1/4" dia. x 36"L . . . . . . . . . . . . . . . .
313-175 Frozen Food Probe, corkscrew tip . . . . . . . . . . . . .
317-175 Frozen Food Probe, corkscrew tip . . . . . . . . . . . . .
$55
$59
$68
$68
$85
$93
$55
$56
$68
$85
$99
$99
Plug-mount Probes
Max temp 392°F / 200°C
2" x 0.12" Dia.
Plug-Mounted FEP “Airline” Penetration Probe
The FEP (plastic) penetration probe is designed especially for airlines
and other locations where safety is paramount. Ideal for measuring
liquids and semi-solids. Probe length is 2".
K
113-155 FEP Plastic Airline Safe Probe, Max 392°F . . . . . . $24
Max temp 482°F / 250°C
3.35" x 0.06" Dia.
Fast Response Meat Probe
Originally designed for measuring burgers, steaks and thin meat
portions. An extremely fast measurement (2 second response.) An
optional detachable coiled or straight extension lead is also available.
K 113-151 Fast Response Needle Probe, Max 482°F . . . . . . . $30
4" x 0.12" Dia.
Max temp 482°F / 250°C
0.5" x 0.06" Dia.
Fast Response Penetration Probe
We start with a 1/8" shaft and reduce the diameter to 1/16" (1.5mm)
at 1/2" from the needle tip. This gives you a compromise between
durability and the better speed of a needle type probe. A complete
reading takes only 4 or 5 seconds.
K
113-159 Fast Response Penetration Probe, Max 482°F . . . . $29
Max temp 482°F / 250°C
5" or 9" x 0.12" Dia.
Plug-Mounted Penetration Probe
Probe tip is swaged to a smaller diameter then sharpened for fast
measurements and easy penetration.
K
K
113-161 5" Penetration Probe, Max 482°F . . . . . . . . . . . . . . $26
113-167 9" Penetration Probe, Max 482°F . . . . . . . . . . . . . . $34
0.40"
Max temp 482°F / 250°C
0.30" Dia.
5" x 0.12" Dia.
Plug-Mounted Surface Probe
Available with straight or right angle tips. An optional detachable
coiled or straight extension lead is also available.
K
K
113-045 Straight Surface Probe, Max 482°F . . . . . . . . . . . . $32
113-046 Right Angle Surface Probe, Max 482°F . . . . . . . . . $39
Max temp 482°F / 250°C
4.7" x 0.12" Dia.
Plug-Mounted Air/Gas Probe
Same as the handheld air/gas probe but without the handle and cable.
The shaft is mounted directly to a miniature thermocouple connector
for plugging directly into a meter. An optional detachable coiled or
straight extension lead is also available.
1-800-393-6434
K
113-301 Plug-Mounted Air/Gas Probe . . . . . . . . . . . . . . . . $24
www.thermoworks.com
Industrial Catalog | 8
THERMOCOUPLE PROBES—TYPE K & T
Surface Probes
Max temp 932°F / 500°C
5" x 0.12" Dia.
0.59" Dia.
Precision Surface Probe
This is the fastest and most accurate handheld surface probe we’ve
seen. Readings generally take less than 5 seconds. Sensor is made
from flat-spring ribbons of thermocouple material.
K
K
103-030 or 303-030 Precision Surface Probe Straight . . . . $57
103-032 or 303-032 Precision Surface Probe Rt. Angle . . . $72
Max temp 482°F / 250°C
1.2"
Roller Surface Probe
Uses the flat spring thermocouple design with roller wheels to allow
use on moving surfaces and rotating rollers. Choose from stainless
steel or PTFE rollers. Surface speeds should not exceed 100 meters
per minute.
1"
K
K
2"
303-036 Roller Surface Probe, PTFE, coiled cable . . . . . . . $130
303-038 Roller Surface Probe, SS, coiled cable . . . . . . . . . $140
Max temp 482°F / 250°C
2"
Griddle Probe
The griddle probe is a heavy duty, weighted surface probe for
measuring temperatures of hot plates and grills. S.S. Armor protects
cable from hot surfaces.
18" x
K
0.5"
113-018 Griddle Probe
15/16"
5" x 0.19"
Heavy Duty Surface Probe
Rugged and durable design covers a very wide range. Used in many
industries for high temperature metal surfaces.
. . . . . . . . . . . . . . . . . . . . . . . . . $116
Max temp 1832°F / 1000°C
0.5" Dia.
K
K
103-020 Heavy Duty Surface Probe, flat cable . . . . . . . . . . . $56
303-020 Heavy Duty Surface Probe, coiled cable . . . . . . . . $56
Max temp 1832°F / 1000°C
5 " x 0.19" Dia.
1 5/16" x 0.5" Dia.
Right Angled Heavy Duty Surface Probe
Same as above but with a bend in the shaft for hard to reach surfaces.
K
K
103-028 Right Angled Heavy Duty Surface Probe, flat cable . . . . $73
303-028 Right Angled Heavy Duty Surface Probe, coiled cable . $73
Max temp 1112°F / 600°C
5.125" x 0.125" Dia.
Surface Probe
This easy to use surface probe features a 1/4" copper disc that is
spring loaded and fit inside a stainless steel shaft. The shaft end is
cut and bent into a tripod to aid in positioning the sensor flat against
a surface. The wide range makes this probe useful in a wide variety of
industrial uses.
K
K
0.24" Dia.
103-000 Surface Probe, flat cable . . . . . . . . . . . . . . . . . . . . $52
303-000 Surface Probe, coiled cable . . . . . . . . . . . . . . . . . $52
Max temp 482°F / 250°C
5.125" x 0.31" Dia.
Ribbon Surface Probe
Features a 0.32" diameter cylindrical head with a stainless steel
ribbon. The thermocouple sensor is welded to the back of the ribbon.
K
K
103-044 Ribbon Surface Probe, flat cable . . . . . . . . . . . . . . $50
303-044 Ribbon Surface Probe, coiled cable . . . . . . . . . . . $50
Between Pack Probe
Rigid stainless steel sheath is flattened for insertion between packages
of produce, frozen foods or other products. Slips easily between
cartons or plastic bagged products. The tip is rounded to minimize
accidental penetration of packaging materials.
9 | Industrial Catalog
0.40" 0.30" Dia.
3"
Max temp: 482°F / 250°C
5" x 0.15" wide (0.08" thin)
K
103-060 Between Pack Probe, flat cable . . . . . . . . . . . . . . . $52
www.thermoworks.com
1-800-393-6434
THERMOCOUPLE PROBES—TYPE K & T
5"
Max temp 500°F / 260°C
0.66"
Bell Surface Probe
These fast response surface probes have a bell-shaped housing with a
thin, flat, stainless steel measuring disc, ideal for measuring surface
temperatures.
K
113-084 or 313-084 Bell Surface Probe . . . . . . . . . . . . . . . $65
Max temp 302°F / 150°C
0.80"
Magnet Surface Probe
Easy to use magnet probe is supplied with a 39" PTFE cable. The
probe is ideal for measuring the surface temperature of ferrous metals.
Many applications in the HVAC, appliance service, plant engineering
and equipment research or manufacturing.
K
113-016 Magnet Surface Probe . . . . . . . . . . . . . . . . . . . . . $27
Pipe Clamp Probe
Ideal for measuring the surface temperature of pipes or tubing in
refrigeration and HVAC systems. Can be used on pipes from 0.24"
diameter up to 1.2" diameter.
K
K
113-040 Pipe Clamp Probe, flat cable . . . . . . . . . . . . . . . . . $29
313-040 Pipe Clamp Probe, coiled cable . . . . . . . . . . . . . . $29
19.75"
Max temp 212°F / 100°C
Max temp 212°F / 100°C
0.75"
Velcro Pipe Probe
Used to wrap around medium and large diameter pipes. Popular in
plant engineering and HVAC.
78"
K
113-080 Velcro Pipe Probe . . . . . . . . . . . . . . . . . . . . . . . . . $40
Washer Thermocouple
Easy method to measure surface temperature permanently. The
thermocouple sensing junction is located on a washer with a 1/4"
diameter hole for bolting to the surface to be measured. Each probe is
supplied with a 78" braided stainless steel cable for durability. Order
with bare lead termination for panel meters or controllers or a miniconnector for plugging in to a handheld meter.
Extension Leads
Extend the reach of your probe with an extension lead. Works with type
K probes and meters.
K
K
K
K
T
Max temp 662°F / 350°C
113-440 Washer Thermocouple, bare lead term. . . . . . . . . $21
113-440-MC Washer Thermocouple, mini-connector . . . . . $24
XCK-2M-MF Coiled Type K Extension lead, 79" (2m) . . . . . . $19
XSK-3M-MF Straight Type K Extension lead, 118" (3m) . . . . $16
XCT-2M-MF Coiled Type T Extension lead, 79" (2m) . . . . . . $19
To Order
836-200 Sachet, 6 x 7.5 inch wipe, carton of 100 wipes
Mini Tub, 2.75 x 5 inch wipe, single tub of 70
836-022
wipes
Was $49
836-020 Case of 10 Mini Tubs
Large Tub, 5 x 5 inch wipe, single tub of 180
836-052
Probe Wipes
wipes
Keep probe clean in food, lab or industrial use. Each wipe is pre-satuCase of 6 Large Tubs
Was $51
836-050
rated with a broad spectrum anti-bacterial solution that is odorless
836-300 Wall Bracket for Large Tub
and does not taint food. Compare our prices, you'll save money!
1-800-393-6434
www.thermoworks.com
$16
$6
$39
$10
$41
$14
Industrial Catalog | 10
THERMOCOUPLE PROBES—TYPE K & T
Wire Probes
Fine Gauge Wire Probe
Teflon (PTFE) insulated with exposed junction. Easily taped, clamped
or glued to surfaces, or holes. Wire dia: 0.01", 0.024" with insulation.
Very fast air, gas or general purpose.
Max temp 482°F / 250°C
K 113-362 39" Length Fine Gauge Wire Probe . . . . . . . . . . . . $12
K 113-363 78" Length Fine Gauge Wire Probe . . . . . . . . . . . . $14
K 113-365 10' Length Fine Gauge Wire Probe . . . . . . . . . . . . $16
T 117-362 39" Length Fine Gauge Wire Probe . . . . . . . . . . . . $12
T 117-363 78" Length Fine Gauge Wire Probe . . . . . . . . . . . . $14
T 117-365 10' Length Fine Gauge Wire Probe . . . . . . . . . . . . $16
Max temp 662°F / 350°C
K 113-382 39" Length High Temp Wire Probe . . . . . . . . . . . . . $12
K 113-383 78" Length High Temp Wire Probe . . . . . . . . . . . . . $14
K 113-385 10' Length High Temp Wire Probe . . . . . . . . . . . . . $16
T 117-382 39" Length High Temp Wire Probe . . . . . . . . . . . . . $12
T 117-383 78" Length High Temp Wire Probe . . . . . . . . . . . . . $14
T 117-385 10' Length High Temp Wire Probe . . . . . . . . . . . . . $16
High Temp Wire
Fibreglass insulation with exposed junction. Use for ovens and
appliance temps. 0.5 sec response, 0.06" diameter.
K
K
Teflon Tip
Use in dishwashers, freezers or anywhere a waterproof thermocouple
is useful. Stranded wire cable with Teflon insulation and a cylindrical
cap sealed over the junction. 0.06" diameter.
K
T
T
T
Max temp 482°F / 250°C
113-372-T 39" Length Teflon Tip Wire Probe . . . . . . . . . . . .
113-373-T 78" Length Teflon Tip Wire Probe . . . . . . . . . . . .
113-375-T 10' Length Teflon Tip Wire Probe . . . . . . . . . . . .
117-372-T 39" Length Teflon Tip Wire Probe . . . . . . . . . . . .
117-373-T 78" Length Teflon Tip Wire Probe . . . . . . . . . . . .
117-375-T 10' Length Teflon Tip Wire Probe . . . . . . . . . . . .
0.16" Dia.
0.25" Dia.
$29
$34
$39
$29
$34
$39
Max temp 2500°F / 1371°C
5' or 10' Length
High Temp Flexible Ceramic Fiber-Insulated Probe
0.16" outer diameter wire x 5' L. Great probe for high temperature
readings. Sensor is exposed.
K
K
WD-08467-64 High Temp Ceramic Fiber-Insulated Probe, 5' $44
WD-08467-10 High Temp Ceramic Fiber-Insulated Probe, 10' . $57
Max temp 950°F / 510°C
120" Length
High Temp Alligator Clip Oven Probe
Stainless steel overbraid protects this probe along with a fiberglass
inner sheath. An alligator clip allows you to place it right where you
need it. 120" lead.
K
8468-22 High Temp Alligator Clip Probe . . . . . . . . . . . . . . . $59
Max temp 662°F / 350°C
78" Length
Crocodile Clip Oven Probe (with exposed junction)
Stainless steel overbraid protects this probe along with a fiberglass
inner sheath. A small clip allows you to place it right where you need
it. 78" lead.
5" x 0.12"
K
113-041 Crocodile Clip Oven Probe . . . . . . . . . . . . . . . . . . $32
General Purpose Probes
Max temp 2012°F / 1100°C
5" x 0.12" Dia.
High Temp Handheld Probe
Mineral insulated probes are ideal for wide temperature ranges. The
probes can be bent, without adversely affecting performance.
K
103-212 or 303-212 High Temp Handheld Probe . . . . . . . . $55
Max temp 2012°F / 1100°C
5" x 0.06" Dia.
1/16" Dia. High Temp Probe
Same as above but with a 1/16" diameter sheath. This version
provides faster response times and the probe is a bit easier to bend for
fitting into holes or between objects.
11 | Industrial Catalog
K
K
103-204 1/16" Dia. High Temp Probe, flat cable . . . . . . . . . $55
303-204 1/16" Dia. High Temp Probe, coiled cable . . . . . . . $55
www.thermoworks.com
1-800-393-6434
THERMOCOUPLE PROBES—TYPE K & T
Max. temp. 482°F / 250°C
3" x 0.12" Dia.
Beverage Probe
Originally designed to measure milk shake temperatures in the fast
food industry. Also ideal for other hot or cold beverages. Fits neatly
into the straw hole of a cup lid. The disk at the top of the probe can be
used as a stop to easily ensure measurement at a uniform depth.
K
113-225 Beverage Probe . . . . . . . . . . . . . . . . . . . . . . . . . $32
Max transition temp: 212°F / 100°C
Max probe temp: 2012°F / 1100°C
7" x 0.06" or 0.12" Dia.
113-420 1/16" High Temp Industrial Probe, bare lead term. . $34
113-420-MC 1/16" High Temp Industrial Probe,
mini-connector . . . . . . . . . . . . . $37
K 113-425 1/8" High Temp Industrial Probe, bare lead term. . . $34
K 113-425-MC 1/8" High Temp Industrial Probe, . . . . . . . . . .
mini-connector . . . . . . . . . . . . . $37
K
K
High Temp Industrial Probes
Simple, no-handle probes cover a very wide temperature range. The
mineral insulated sheath can be easily bent to any shape. Available in
two diameters, 1/16" or 1/8". Includes 78" of flat PVC insulated cable.
Max transition temp: 212°F / 100°C
Max probe temp: 392°F / 200°C
5.12"
X 0.19"
5" x 0.19" or 0.25" Dia.
113-444 3/16" Standard Industrial Probe, bare lead term. . .
113-444-MC 3/16" Standard Industrial Probe,
mini-connector . . . . . . . . . . . . .
K 113-449 1/4" Standard Industrial Probe, bare lead term. . . .
K 113-449-MC 1/4" Standard Industrial Probe,
mini-connector . . . . . . . . . . . . .
K
Standard Industrial Probes
Popular, general purpose, rigid stainless steel probe. They are very
inexpensive and can be used with handheld meters or permanently
installed for long term monitoring. Available in 3/16" diameter and
1/4" diameter. Includes 78" of flat PVC insulated cable.
$24
K
$27
$24
$27
Max. temp. 482°F / 250°C
5" x 0.19" Dia.
Air or Gas Probe
The stainless steel shaft is open ended with a ventilation hole provided
in the sides to expose the bare thermocouple sensor to the outside for
faster measurements of air or gases. Ideal for environmental readings,
cold storage or HVAC work.
K
K
103-300 Air or Gas Probe, flat cable . . . . . . . . . . . . . . . . . . $46
303-300 Air or Gas Probe, coiled cable . . . . . . . . . . . . . . . . $46
0.1°C Type T Thermocouple Probes
.059"
General Purpose Probe
Use for liquids, gases, semi-solids. Plastic handle with straight 3 in.
S.S. shaft. Max. Temp. 400°C (750°F). Full reading in 2.5 seconds.
T
T
.029"
Bare-Wire Thermocouple Six-Pack
Economical solution to multi-point measurements where precision
is required. Exposed, welded thermocouple bead, tough Kapton
Max temp 750°F / 400°C
3" or 9"
HT-1 General Purpose Probe, 3 in. shaft, 5ft. lead . . . . . . . . $75
HT-2 General Purpose Probe, 9 in. shaft, 5ft. lead . . . . . . . . $78
Max temp 750°F / 400°C
insulation, flexible, 5 ft. leads. Each thermocouple includes a miniplug. Max. Temp. 400°C (750°F). Time constant 0.01 secs. Package
of six.
T
.025" Dia.
PT-6 Bare-Wire Thermocouple Six-Pack . . . . . . . . . . . . . . . $119
Max temp 392°F / 200°C
1.18" Length
Needle Microprobe
Fast-response needle probe for instant readings in tissue, semi-solids,
liquids. Great for very small specimens, powders, and samples.
Sealed needle tip protects thermocouple. 5 ft. lead. 0.025" dia. X
1.18" length. Time constant 0.15 secs. Full reading in less than 1
second. Max. Temp. 200°C (392°F)
T
.016" Dia.
Flexible Microprobe
Totally sheathed and sealed in Teflon tubing this microprobe gives
instant readings. Implantable in semi-solids and tissue with supplied
needle. Immersible in liquids, suitable for gases, can be taped to
1-800-393-6434
MT 23/3 Needle Microprobe 23 ga. . . . . . . . . . . . . . . . . . . . $149
Max temp 302°F / 150°C
surfaces. Dia. 0.016". Max. Temp. 150 C (302°F). Time constant 0.08
secs.
T
IT-21 Flexible Microprobe . . . . . . . . . . . . . . . . . . . . . . . . . $109
www.thermoworks.com
Industrial Catalog | 12
PRINTING THERMOCOUPLE METER
9882 Printing / Datalogging
Thermocouple Meter
• 0.1°C/°F or 1°C/°F resolution
• Features a real time clock
• Range of -328 to 2498°F / -200 to 1370°C
• Includes built-in dot matrix printer
• Inputs for two thermocouple probes
• Reads K, J, T, R, S, and E thermocouples
• Stores 4,000 readings at user-selected intervals
• Stores 100 readings on demand with ID
• Includes RS-232 cable and software
The 9882 Printing Datalogger Thermometer is a
microprocessor-based printing and data-logging
thermometer. The printing thermometer measures
temperatures over a wide range. The unit incorporates
two thermocouple probe sockets, enabling the
user to connect one or two probes with selectable
readings of probe 1, probe 2 and a differential
temperature reading.
The 9882 can be programmed to record temperatures
at intervals from once per second to every two hours,
with memory to store up to 4,000 readings. It can
also log the start and stop time – immediate or time
delayed. The 9882 allows 99 “On-Demand” readings
to be stored and downloaded. The dot matrix printer
prints directly onto thermo-paper.
Software Included
Shown with 303-159 Fast Response and
103-030 Precision Surface probes.
Probes sold separately.
Log up to 4,000 readings
Specifications
Range
Accuracy
Probe
Resolution
Power
Battery
Memory
Display
Interface
Dimensions
Weight
-328 to 2498°F / -200 to 1370°C
0.3% of reading ±1.3°F (±0.7°C)
Thermocouple types K, J, T, R, S, E,
(2 channel)
0.1°C/°F or 1°C/°F
4 x AA or optional AC/DC power
adapter
Approximately 50 hours
4,000 internal logging / 100 demand
logging
Custom LCD
RS-232, includes software & cables
8.2" (L) x 2.75" (W) x 2.1" (D)
208mm (L) x 70mm (W) x 53mm (D)
Less than 1 lb.
Log up to 99 “on-demand” readings with location label
Accessories
Hard case, paper, RS232 cable,
software, and user manual included.
To Order
Printing/Logging Thermometer, 1 roll
of paper, RS232 lead and software,
instructions, case
812-081 Thermal Paper (2 rolls)
9882-ADP AC adaptor for 9882, 100-240 VAC, US plug
9882
AC Adaptor
9882-ADP
13 | Industrial Catalog
Thermocouple Probes
See pages 7-12
www.thermoworks.com
$359
$7
$18
1-800-393-6434
BENCHTOP CONTROLLER / COMBO THERMOMETER
Benchtop RTD Proportional
Temperature Controllers
• Accepts 3-wire 100Ω RTD for control
• Rear panel powered 110V, 10A receptacle
• Rocker switch shows Set and Actual temps
• Variable output control from 720 to 1200 watts
• Proportional integrating control
Specifications
Temp Range
Power
Resolution
Control Output
Shown with 8117-97 probe.
Probes sold separately.
Simple to set-up, this bench-top controller adds digital
convenience to heated lab or process equipment. Rear
panel accepts direct plug-in of 110V resistive heaters
or devices. Dial-in the desired temperature, switch the
display to “Actual” and the controller will apply power
until the set-point is reached. Proportional, integrating
control circuit with solid-state output minimizes
overshoot and can deliver stability to better than
±0.1°C depending on your equipment, medium, heat
loss and other variables. Scale, resolution and range
depend on the model selected. Economical and simple
compared to panel-mount alternatives.
Combo Thermometer
Infrared + Thermocouple Probe
• Fold-out type K probe
• Infrared with 5:1 optics
• Slips into a shirt pocket
• Very easy-to-use
Ambient Temp
Display
Control Type
Dimensions
-148.0 to 199.9°F (-100.0 to 199.9°C)
-148 to 1562°F (-100 to 850°C)
115 VAC
0.1° or 1.0°
Three-prong receptacle rated for 115 VAC,
10A max, resistive; 720 to 1200 watts
41 to 113°F (5 to 45°C)
3-1/2-digit LED 0.5"H
PID
6.0" (W ) x 2.5" (H) x 6.3" (D)
To Order R600F-E
R600C-E
R601F-E
R601C-E
RTD Temp Controller, 0.1°F, 199.9°F
RTD Temp Controller, 0.1°C, 199.9°C
RTD Temp Controller, 1.0°F, 1562°F
RTD Temp Controller, 1.0°C, 850°C
*220V input models available at www.thermoworks.com
High Temp RTD Probe (8117-97)
$99
Hi-Temp bendable sheath RTD probe, 932°F (500°C)
View a complete selection of air, gas, immersion, and high temperature
RTD probes at www.thermoworks.com.
Specifications
Range
Accuracy
Resolution
Probe
Units
Emissivity
Distance/Target
To Order Probe rotates
$349
$349
$349
$349
814-065
830-001
830110-L
10203
CALIRFS
IR: -27 to 428°F / -33 to 220°C
TC: -67 to 626°F / -55 to 330°C
IR: ±2%, or 2°C, whichever is greater
TC: ±1% or 1°C, whichever is greater
0.1° from -9.9 to 199.9, 1° beyond
Thermocouple
Switchable °C or °F
Adjustable from 0.1 to 1.00
5:1 (1" target diameter at 5" distance)
Limited Time Price!
Combo Thermometer, IR + ProbeWAS $89
Protective Zipper Wallet
$69
$8
Protective Leather Wallet
$16
Wall Bracket
3-point NIST-Traceable Calibration
Certificate
$19
$35
IR Sensor 5:1
We based this handy pocket unit on our popular
Thermapen™ shape. Push one button to read infrared.
Push another to read the probe. The 5:1 optics easily
beat the 1:1 competition. The pointed penetration
probe folds into the side of the meter for storage. The
type K thermocouple gives speedy results. Switch
between Max, Min, and °C/°F. Scan for immediate
surface temperatures, or fold-out the probe and get an
accurate internal temperature in seconds.
1-800-393-6434
Accessories
Zipper Wallet
830-001
www.thermoworks.com
Leather Wallet
830-110-L
Wall Bracket
10203
Industrial Catalog | 14
INFRARED THERMOMETERS
CZ-IR
Cold Zone Infrared
Specifications
-67 to 428°F / -55 to 220°C
14 to 122°F / -10 to 50°C
0.1° between -19.9 to 199.9°, otherwise 1°
Switchable °C or °F
1 second
±1.1°F / 0.6°C from 59 to 95°F / 15
to 35°C
Accuracy
±1.8°F / 1.0°C from 32 to 149°F / 0
(Tamb=23 ±3°C)*
to 65°C;
±1.5% over the rest of the range.
1:1 (1" target diameter at 1" distance)
Distance/Target
Adjustable from 0.05 to 1.00
Emissivity
(1) CR2032 Lithium Cell, included
Battery
1.5" (W) x 4.5" (H) x 0.9" (D)
Dimensions
369 mm (W) x 115 mm (H) 22 mm (D)
1.4 oz. / 40.4 g. including battery
Weight
Certificate of Conformance included
Certificate
Range
Ambient Temp.
Resolution
Units
Response
• Range -67 to 428°F / -55 to 220°C
• Best IR for cold chain applications
• Low ambient effect in walk-ins
• High accuracy to ±1.1°F / 0.6°C
Measure temperature in walk-ins, freezers, and cold
storage units with confidence with our new Cold
Zone IR thermometer. With little ambient effect, you
can check cold temperatures all day long without
waiting for instrument equilibration. Emissivity is
adjustable on the Cold Zone IR so you can point and
measure just about any surface. Each unit ships with
a certificate of conformance stating that we used our
NIST-Traceable equipment to check each one. An
optional calibration certificate is available with test
data. Also included is a convenient neck lanyard and
installed battery so it’s ready to use right out of the
package.
Limited Time:
Buy 5: $39 each
Buy 10: $34 each
To Order
CZ-IR
CAL-IRFS
Cold Zone Infrared Thermometer
3-point NIST-Traceable Calibration
Certificate
$49
$35
TW2
Pocket Infrared
Specifications
Range
Accuracy
Resolution
Units
Emissivity
Distance/Target
Battery
Certificate
-67 to 482°F / -55 to 250°C
±2% of reading or 4°F / 2°C
whichever is greater
0.1° to 199.9°, 1° beyond
Switchable °C or °F
Adjustable from 0.05 to 1.00
6:1 (1" target diameter at 6" distance)
2 x CR2032, included
Certificate of Conformance included
• 6:1 optics for a smaller target spot
• Includes laser sighting
• Includes detachable neck lanyard
Shop around but read the specs closely! This is the
absolute best value in a palm-sized IR thermometer.
Professional 6:1 optics give you a 1" measurement
spot at a 6" distance.
Comfortably fits your palm with the trigger button on
the side. Simple mode button steps through Max,
Min, C/F, and adjustable emissivity. If you want a
pocket unit, don’t settle for less!
15 | Industrial Catalog
To Order TW2
CAL-IRFS
www.thermoworks.com
Limited Time Price!
Pocket Infrared Thermometer
3-point NIST-Traceable Calibration
Certificate
$49
$35
1-800-393-6434
INFRARED THERMOMETERS
IRGUN
Specifications
Range
Accuracy
• High quality 12:1 optics
• Bright laser pointer
• Point-and-shoot simplicity
• Max temp and hold
features
• Easily switch from °C to °F
• Backlit display
• Fixed 0.95 emissivity
-58 to 750°F / -50 to 400°C
Tobj=15-35°C: ±1°C, Full Range:
±2%, 2°C
0.15°C at 25°C, 0.75°C at 80°C
0.1° from -9.9 to 199.9, 1° beyond
Switchable °C or °F
Fixed at 0.95
1 second
12:1 (1" target diameter at 12" distance)
32 to 122°F / 0 to 50°C
2 x AAA, included
Certificate of Conformance included
Repeatability
Resolution
Units
Emissivity
Response Time
Distance/Target
Operating Temp
Battery
Certificate
To Order Designed for broad general purpose use in research,
industrial applications, HVAC and construction. Read
temperature instantly from a distance. At 12" you can
measure a 1" spot diameter. The bright pointing laser
helps you aim.
Limited Time Price!
Industrial Infrared Thermometer
IR Belt Holster, Nylon
Hard Case for IRGun
3-point NIST-Traceable Calibration
Certificate
IRGUN
4HG
834-740
CAL-IRFS
$49
$9
$20
$35
Accessories
Emissivity is factory set at 0.95 for simplicity in
reading the broadest range of surface materials.
There are no extra settings to learn. Pull the trigger
for an instant reading. Hold it down for scanning or
checking a changing temperature. Let go of the trigger
and the last reading is held in the display. A max.
temp reading is constantly visible for peak readings. It
resets with the auto-off after about 15 seconds.
Hard Case
834-740
IR Holster
4HG
IRFS
Infrared Food Safety Thermometer
Specifications
• High quality 12:1 optics
• Bright laser pointer
• Point-and-shoot simplicity
• Max temp and reading hold
features
• Handy button for switching
from °C to °F
• Range to 536°F / 280°C
Limited Time:
Buy 5: $63 each
-67 to 536°F / -55 to 280°C
Tobj=32 to 150°F: ±2°F, Full Range: 1.5%
0.1° from -9.9 to 199.9, 1° beyond
Switchable °C or °F
Fixed at 0.97
1 Second
12:1 (1" target diameter at 12" distance)
32 to 122°F / 0 to 50°C
2 x AAA, included
Certificate of Conformance included
To Order
IRFS
4HG
834-740
CAL-IRFS
The 12:1 optics mean the I.R.F.S. reads a smaller
spot diameter at a greater distance. Just pull the
trigger and point the laser at your subject. The
display updates instantly and locks the reading
when you release the trigger. The Max function
records the highest temp during the scan. No
complicated buttons or settings. Emissivity is preset
to 0.97 for more accurate general use in food and
frozen food applications. Now look at the price.
Why pay someone else $99—or more— for less
thermometer?
1-800-393-6434
Range
Accuracy
Resolution
Units
Emissivity
Response
Distance/Target
Operating Temp
Battery
Certificate
Infrared Food Safety Thermometer
IR Belt Holster, Nylon
Hard Case for IRFS
3-point NIST-Traceable Calibration
Certificate
$79
$9
$20
$35
Accessories
www.thermoworks.com
Hard Case
834-740
IR Holster
4HG
Industrial Catalog | 16
INFRARED THERMOMETERS
IRK
Infrared + Type K Thermocouple
Specifications
IR: -76 to 932°F / -60 to 500°C
TC: -76 to 1999°F / -60 to 1400°C
IR: Tobj=15-35°C: ±1°C, Full Range:
±2%, 2°C TC: ±0.8%, 1°C
0.1° from -9.9 to 199.9, 1° beyond
Accepts type K probes with mini conn.
Switchable °C or °F
0.1 to 1, adjust in 0.01 increments
1 Second
11:1 (1" target dia. at 11" distance)
32 to 122°F / 0 to 50°C
2 x AAA, included
Certificate of Conformance included
Range
Accuracy
Resolution
Probe
Units
Emissivity
Response
Distance/Target
Operating Temp.
Battery
Certificate
• High quality 11:1 optics
• Read up to 1999°F with an
optional thermocouple
• Industrial applications, food
processing, food service
• Adjustable emissivity
To Order
• Variety of type K probes
Infrared + Type K Thermocouple Input
available
Y-IRK
Shown with 303-159 Fast Response probe.
4HG
834-740
IR Belt Holster, Nylon
Hard Case for IRK and Probes
$99
$9
$20
Limited Time:
FREE 303-159 Probe Included!
The I.R.K. gives you two instruments for the price of
only one. You also get Max, Min, Hold, Diff, Avg, Hi
Alarm, Lo Alarm, a bright laser, display backlight and
a °C/°F button. Even with all this, the I.R.K. is so easy
to use. Just press the mode key once-each to step
through these features. You probably won’t even read
the manual. If you want one meter for everything, get
this one.
IRT
Infrared + Type T Thermocouple
Accessories
Hard Case
834-740
Shown with 307-159 Fast Response probe.
See pages 7-12
Specifications
Range
Accuracy
• High quality 11:1 optics
• Highest accuracy available
in an infrared thermometer
• Perfect for foods,
pharmaceuticals and
research
• Adjustable emissivity for
multiple surface materials
Thermocouple Probes
Resolution
Probe
Units
Emissivity
Response
Distance / Target
Operating Temp.
Battery
Certificate
IR: -67 to 536°F / -55 to 280°C
TC: -76 to 662°F / -60 to 350°C
IR: Tobj=15-35°C: ±0.6°C,
Full Range: ±1.5%
TC: -5° to 65°: ±0.5°C, above 65°: ±1%
0.1° from -9.9 to 199.9, 1° beyond
Accepts type T probes with mini conn.
Switchable °C or °F
0.1 to 1, adjust in 0.01 increments
1 Second
11:1 (1" target diameter at 11" distance)
32 to 122°F / 0 to 50°C
2 x AAA, included
Certificate of Conformance included
To Order
Infrared + Type T Thermocouple Input
Y-IRT
IR Belt Holster, Nylon
4HG
834-740 Hard Case for IRT and Probes
$119
$9
$20
Limited Time:
FREE 307-159 Probe Included!
Start with the features of the I.R.F.S. but add better
accuracy, a type T thermocouple and adjustable
emissivity and you’ll get the I.R.T. Combo Meter. The
mode button steps through each of the features on
the I.R.T. You get max, min, diff, and avg readings.
You can also set High Low alarms to give a gentle
beep if your reading does not meet the thresholds
you set.
17 | Industrial Catalog
Accessories
www.thermoworks.com
Hard Case
834-740
Thermocouple Probes
See pages 7-12
1-800-393-6434
INFRARED THERMOMETERS
IR-Pro
Professional Infrared Thermometer
• 50:1 distance to spot ratio
• Dual laser for accurate
target sighting
• -76°F to 1832°F
• Includes type K socket and
probe
• Accuracy to ±1.5% of
reading
Specifications
IR: -76 to 1832°F / -60 to 1000°C
TC: -83.2 to 1999°F / -64 to 1400°C
IR: Tobj=15 to 35°C; Tamb=25°C: ±1°C /
greater of 1.8°F, ±1.5% of reading or
Accuracy
1.5°C / 2.7°F
TC: greater of ±1% of reading or 1°C /
1.8°F
0.1° from -9.9 to 199.9°
Resolution
Switchable °C or °F
Units
Adjusts from 0.1 to 1 in 0.01 increments
Emissivity
Distance/Target 50:1 (1" target diameter at 50" distance)
Operating Temp. 32 to 122°F / 0 to 50°C
2 x AAA, included
Battery
8.0" x 7.7" x 1.8"
Dimensions
203.3mm x 197.0mm x 47.0mm
Certificate of Conformance included
Certificate
Range
To Order
Professional Infrared Thermometer +
Fast Response Type K Probe (303-159)
Y-IR-Pro
Shown with 303-159 Fast Response probe.
Limited Time:
FREE 303-159 Probe Included!
The IR-Pro gives you a small measurement spot even
at a distance. The 50:1 ratio means you can measure
an air vent or steam trap on a warehouse ceiling.
The dual lasers pinpoint the outer diameter of the
target you’re measuring. Great for electrical panels,
bearings, food processing or hundreds of other
applications. Reads type K thermocouple probes.
Functions include Min/Max, Lock, Hi/Low alarms,
and differential. A professional instrument at an
incredible price!
Close-Focus Infrared
IR Holster
STACSC
CAL-IRFS 3-point NIST-Traceable Cal Certificate
CAL-IR5M 5-point NIST-Traceable Cal Certificate
$229
$19
$35
$65
Accessories
IR Holster
STACSC
Thermocouple Probes
See pages 7-12
Close-Focus IR measurement spot - 0.1"
Smallest target diameter
of competition - 0.75"
• 0.7 inch (18mm)
Specifications
measurement distance
• 0.1 inch (2.5mm) spot size Range
• Max temp and hold features Operating Temp.
• Easily switch from °C to °F Resolution
• Adjustable emissivity
• Great for electronics test
Accuracy
or biological applications
(Tamb=23 ±3°C)
-67°F to 428°F / -55°C to 220°C
32 to 122°F / 0 to 50°C
Thermometer: 0.2°C/0.5°F
Stop Watch: 1 sec.
-55 to 0°C; ±(2+0.05/deg)°C; above
0°C; ±2°C (4°F) or ±2% of the reading,
whichever is greater
Measurement Dist. 0.7"/ 18mm, with a 0.1" / 2.5mm spot size
0.95 default; adjustable to 1 in 0.05
Emissivity
increments
Clock; room temp. reading while power
is off; °C/°F switchable; MIN/MAX/LOCK;
Features
stop watch
2 x AAA, 15 hours (auto power off after
Battery
15 seconds)
6.7"(W) x 1.5" (H) x 1.0" (D)
Dimensions
170 mm (W) x 38 mm (H) x 25 mm (D)
4.4 oz. / 125 g. including batteries
Weight
Certificate of Conformance included
Certificate
Limited Time:
Now $159
Actual measurement spot
Take infrared measurements of tiny objects. Dual
laser pinpoints target area at 0.1" (2.5mm) spot size.
Large LCD display with ambient temperature and
built-in clock. Range to 428°F (220°C) with accuracy
to ±1.0°F (0.6°C).
1-800-393-6434
To Order
Close-focus Infrared Thermometer
Was $199
830-001 Protective Zipper Wallet
CF-IR
www.thermoworks.com
$159
$8
Industrial Catalog | 18
PROFESSIONAL INFRARED
IR-Pro-USB
Professional IR with USB
NEW!
• USB interface for real-time data capture
• On-board data memory for up to 100 stored
readings downloadable to the PC
• 150ms response time (infrared)
• Type K thermocouple socket
• Dual laser sighting for precision targeting
• °F / °C switchable
• Emissivity adjustable from 0.10 to 1.0
• MAX/MIN/AVG/DIF temperature displays
• Backlit LCD display
• Programmable high and low alarms with
audible alert
• 50:1 distance-to-spot ratio
Specifications
IR: -58 to 2192°F / -50 to 1200°C
TC: -58 to 2498°F / -50 to 1370°C
IR: ± 5.4°F / 3°C from
-58 to 68°F / -50 to 20°C
±1.0% ±1.8°F / 1.0°C
from 68 to 932°F / 20°C to 500°C
±1.5% from 916°F to 2192°F / 500°C
Accuracy
to 1200°C
TC: ±1.5% ± 5°F / 3°C from -50 to
1000°C / -58 to 1832°F
±1.5% ± 3.6°F / 2°C from 1000 to
1370°C / 1832 to 2498°F
Resolution
0.1°F / 0.1°C <1000; 1°F / 0.5°C >1000
Switchable °C or °F
Units
Default 0.95; adjusts from 0.1 to 1 in
Emissivity
0.01 increments
150ms (infrared)
Response
Distance/Target 50:1 (1" target diameter at 50" distance)
Operating Temp. 32 to 122°F / 0 to 50°C
1 x 9V, included
Battery
7.8" (H) x 5.4" (W) x 1.9" (D)
Dimensions
199 mm(H) x 138 mm(W) x 50 mm(D)
11.2 oz. / 317.5g. including battery
Weight
Certificate of Conformance included
Certificate
Range
Shown with 103-159 probe, not included.
The IR-USB-Pro is capable of non-contact (infrared)
temperature measurements at the touch of a button.
The built-in dual laser increases target accuracy
while the backlight LCD and handy push-buttons
combine for convenient ergonomic operation.
This unit transmits the IR and Type K measurement
data to the PC via USB in real-time. In addition, the
thermometer is capable of storing up to 100 data
locations on board the unit. These readings can be
recalled and displayed on the LCD display and later
downloaded to the PC.
Hard case, mini-tripod, basic type K thermocouple,
software, USB cable, and battery included.
Store IR and type K Thermocouple measurements in real-time
directly to your PC. Also download up to 100 data points
stored in the IR-Pro-USB’s memory.
IR Holster
STACSC
19 | Industrial Catalog
Thermocouple Probes
See pages 7-12
To Order Introductory Price!
Professional Infrared and Type K
IR-Pro-USB Thermometer with USB Interface,
software included
IR Holster
STACSC
3-point NIST-Traceable Calibration
CAL-IRFS
Certificate
5-point NIST-Traceable Calibration
CAL-IR5M
Certificate
www.thermoworks.com
$299
$19
$35
$65
1-800-393-6434
HUMIDITY
RT817E
Thermo-Hygrometer
• Large digit display for humidity and temperature
• Max/Min memory
• Ice point alert
• Outdoor temperature display
• °F/°C switchable
• Foldaway stand
• Mounting keyhole
Specifications
20 to 99% RH
Indoor: 32 to 122°F / 0°C to 50°C
Outdoor: -58 to 158°F / -50°C to 70°C
RH : ±3%at 77°F / 25°C
Accuracy
Temp: ±2°F / 1°C
1%; 0.1°
Resolution
10 seconds
Response
1 x AAA
Battery
Sensor Wire Length 9.8’ / 3m
1" digits
3.1" (W) x 2.6" (H)
Display
79mm (W) x 66mm (H)
3.9" (W) x 4.3" (H) x 0.8" (D)
Dimensions
98 mm (W) x 110 mm (H) x 2mm (D)
Range
The new RT817E displays indoor and outdoor
temperature as well as indoor humidity. Each unit
ships with an external temperature sensor with 10
feet of cable to measure temperature in a remote
location.
The RT817E mounts on the wall or on the desk. With
large 1 inch digits you’ll have no trouble reading the
display.
The RT817E records Min and Max temperatures as
well as an ice point alarm for use with the remote
probe. Set the alarm to ON and you’ll be alerted
when the outside temperature drops below 32°F
(0°C).
RT819
Pocket Temperature/Humidity Pen
To Order
Thermo-Hygrometer
1-4:
with Remote Probe
$39 ea.
NIST-Traceable RH Calibration
CAL-RH1PT
Certificate
RT817E
5-up:
$29 ea.
$35
• Dual display for humidity and temperature
• Max/Min memory
• °F/°C switchable
• Large digit display
• Pen shaped design
• Pocket clip
• 3% accuracy
• Handy HVAC tool
Specifications
Designed to slip into a shirt pocket, this professional
tool delivers easy-to-read display of temperature and
relative humidity. Great for HVAC, lab applications,
manufacturing environments, and field work. Max
and Min function stores high and low readings. At
this price and this convenient size, get one for each
of your staff.
Temperature
Humidity
20 to 95% in 59 to 122°F Range
32 to 122°F /
25 to 95% in 41 to 122°F Range
Range
0 to 50°C
30 to 95% in 32 to 122°F Range
±3%RH at
±2°F / 1°C
Accuracy
77°F / 25°C
0.1°
1%
Resolution
6 seconds
Response
1 x AAA
Battery
2" (W) x .56" (H)
Display
52 mm (W) x 14 mm (H)
0.9"(W) x 5.4" (H) x 0.8" (D)
Dimensions
23 mm (W) x 138 mm (H) x 20 mm (D)
To Order
RT819
CAL-RH2PT
1-800-393-6434
www.thermoworks.com
Pocket TH Pen
NIST-Traceable RH
2-point Calibration Certificate
$35
$65
Industrial Catalog | 20
THERMADATA LOGGERS
NEW!
Series II
Loggers
Series I and Series II
Temperature and Humidity Data Loggers
• Waterproof rating to IP66/67
(series II)
• Stores 4,000 readings
• Alarm LEDs on logger
• Remote start
• 2 year battery life
• Range to 257°F
• Accuracy to ±0.9°F (±0.5°C)
• Single software suite for all
loggers
Excellent for agriculture, fisheries,
and food processing.
830-270 Silicone Boot ($8)
Optional silcone boot
Series II ThermaData Loggers
A ThermoWorks exclusive, the
ThermaData Series loggers perform
in the harshest conditions. Our new
Series II loggers now include a waterproof
rating to IP67 so strong jets of water and
high humidity are no problem making factory data
logging now possible.
For high temperature use, select a logger with an external probe
with a range to 257°F. Each probe includes a convenient penetration
tip for use with meats, packaging, and other hard to measure applications.
Choose a model with an LCD display so you’ll always know the last stored
value.
There’s more. Each logger has a 2-year battery life, LED alarm indicators
so you’ll know if your limits have been breached, a magnetic key for remote
start, field calibration adjustment, and an easy-to-use software suite for all
loggers. If you’re looking for simplicity and high value in a data logger look
no further.
Limited Time
Series I Price:
$49 each
Loggers with
No Display
ThermaData
Price
Description
Series I
TB
TBF
TB1F
White 293-105, Black 293-701 $49
295-001 $99
295-101 $109
295-011 $119
Series I data logger, 1 channel internal,
not waterproof
Series II temp logger,
1 channel: internal
Series II temp logger,
1 channel: external fixed probe
Series II temp logger, 2 channel:
1 internal & 1 external fixed probe
-40 to 183°F (-40 to 85°C)
-40 to 185°F (-40 to 85°C)
Int: -40 to 185°F (-40 to 85°C)
Ext: -40 to 257°F (-40 to 125°C)*
Int: -40 to 185°F (-40 to 85°C)
Ext: -40 to 257°F (-40 to 125°C)*
±1.8°F (±1.0°C)
±0.9°F (±0.5°C)
±0.9°F (±0.5°C)
±0.9°F (±0.5°C)
na
IP66/67
IP66/67
IP66/67
2,048 stop when full, or overwrite
4,000 readings
4,000 readings
4,000 readings (2,000/channel)
5 years
2 years
2 years
2 years
Range
Accuracy
Waterproof Rating
Capacity
Battery Life
*Cable Temp: 5 to 122°F (-15 to 105°C)
Loggers with
No Display
ThermaData
TB2F
TBC
TB1C
TB2C
HTB
295-111 $129
295-501 $139
295-051 $149
295-551 $209
295-061 $139
Series II temp logger,
2 channel:
2 external fixed probes
Series II temp logger,
1 channel
external removable probe
Series II temp logger,
2 channel: 1 internal &
1 external removable probe
Series II temp logger,
2 channels
2 external removable probe
Series II humidity logger,
2 channel: 1 internal temp,
1 internal humidity
-40 to 257°F (-40 to 125°C)*
-40 to 257°F (-40 to 125°C)*
±0.9°F (±0.5°C)
±0.9°F (±0.5°C)
Price
Description
Range
Accuracy
Waterproof Rating
Capacity
Int: -40 to 185°F (-40 to 85°C)
-40 to 257°F (-40 to 125°C)*
Ext: -40 to 257°F (-40 to 125°C)*
±0.9°F (±0.5°C)
±0.9°F (±0.5°C)
-4 to 185°F ( -20 to 85°C)
0 to 100%RH
±0.9°F (±0.5°C) ±2%RH
IP66/67
IP66/67
IP66/67
IP66/67
na
4,000 readings
(2,000/channel)
4,000 readings
4,000 readings
(2,000/channel)
4,000 readings
(2,000/channel)
8,000 readings
(4,000/channel)
2 years
2 years
2 years
2 years
2 years
Battery Life
*Cable Temp: 5 to 122°F (-15 to 105°C)
21 | Industrial Catalog
www.thermoworks.com
1-800-393-6434
THERMADATA LOGGERS
Loggers with
Display
ThermaData
TD
TDF
TD1F
TD2F
296-001 $109
296-101 $129
296-011 $139
296-111 $149
Series II temp logger,
1 channel: internal
Series II temp logger,
1 channel: external fixed probe
Series II temp logger, 2 channel:
1 internal & 1 external fixed probe
Series II temp logger,
2 channel: 2 external fixed probes
-40 to 185°F (-40 to 85°C)
Int: -40 to 185°F (-40 to 85°C)
Ext: -40 to 257°F (-40 to 125°C)*
Int: -40 to 185°F (-40 to 85°C)
Ext: -40 to 257°F (-40 to 125°C)*
-40 to 257°F (-40 to 125°C)*
±0.9°F (±0.5°C)
±0.9°F (±0.5°C)
±0.9°F (±0.5°C)
±0.9°F (±0.5°C)
IP66/67
IP66/67
IP66/67
IP66/67
4,000 readings
4,000 readings
4,000 readings (2,000/channel)
4,000 readings
(2,000/channel)
2 years
2 years
2 years
2 years
Price
Description
Range
Accuracy
Waterproof Rating
Capacity
Battery Life
*Cable Temp: 5 to 122°F (-15 to 105°C). Body limited to 185°F (85°C).
Loggers with
Display
ThermaData
TDC
TD1C
TD2C
HTD
296-501 $159
296-051 $169
296-551 $229
296-061 $159
Series II temp logger,
1 channel
external removable probe
Series II temp logger,
2 channel: 1 internal &
1 external removable probe
Series II temp logger,
2 channels
2 external removable probe
Series II humidity logger,
2 channel: 1 internal temp,
1 internal humidity
-40 to 257°F (-40 to 125°C)*
Int: -40 to 185°F (-40 to 85°C)
Ext: -40 to 257°F (-40 to 125°C)*
-40 to 257°F (-40 to 125°C)*
-4 to 185°F ( -20 to 85°)C
0 to 100%RH
±0.9°F (±0.5°C)
±0.9°F (±0.5°C)
±0.9°F (±0.5°C)
±0.9°F (±0.5°C) ±2%RH
IP66/67
IP66/67
IP66/67
na
4,000 readings
4,000 readings
(2,000/channel)
4,000 readings
(2,000/channel)
8,000 readings
(4,000/channel)
2 years
2 years
2 years
2 years
Price
Description
Range
Accuracy
Waterproof Rating
Capacity
Battery Life
*Cable Temp: 5 to 122°F (-15 to 105°C)
ThermaData Software Suite & Cradle
• Convenient viewing or printing of time and temperature graphs
• Data display in table format
• Overlay multiple logs onto same chart
• Export data to text file format (Excel)
• Calibration wizard for programming offsets
• Start, stop and program logger settings
• Fast download via any USB port
• Alarm indication with alarm log file
• Alarm log includes number and duration of alarms
• Use with all ThermaData loggers
• Data log summary information includes Min,
Max, Avg, Start, Stop, Duration, and Alarms
• Compatible with XP, Vista, Win 7 (32 & 64 bit)
When you use our
ThermaData loggers, you’ll
only need one software
package, our ThermaData
Logger Software Suite
for Windows. It will
conveniently and quickly
download your logged
data to your PC for
USB Cradle
storage, printing, and
viewing. Overlay multiple logs for thermal mapping
applications or time testing. Overlaid charts are
matched by reading number for convenience.
1-800-393-6434
To Order
293-104 USB Cable & Software (Series I)
ThermaData USB Cradle &
293-804
Software (Series II)
www.thermoworks.com
$89
$89
Industrial Catalog | 22
LOGMASTER LOGGERS
LogMaster Series
logger and measure ovens,
sterilizers, hot plates, or any
other processing application.
Select from mini-needle
thermocouples to high
temperature wire types.
Select a wireless logger
with an external probe and
• Single software suite for over 25
collect data from anywhere in
different loggers
the factory. Extend wireless
• Models for external thermocouples
capabilities to a remote area
and RTDs
up to a mile away with an RF
• Wireless to 1 mile with extender
• Real-time monitoring with email alerts extender kit.
• High accuracy
• Range to 2000°F (with thermocouple) For high temperature or
• Optional NIST-Traceable calibration
special applications, plug a
certificate
type K thermocouple into a
• 1-year battery life on most models
The LogMaster software lets
you export data, overlay
graphs, re-calibrate loggers in
the field, and much more.
Temperature &
Humidity Loggers
LogMaster TransiTemp-RH Multi
Price
$115
RHTemp101
Temp101
Temp 100
$199
$79
$109
Description
Temp & humidity logger,
Temp & humidity logger,
reusable, push start
high capacity
90 day battery
Temp logger, internal
Temp logger, internal
with push button start
Range
-4 to 158°F (-20 to 70°C) -40 to 176°F (-40 to 80°C)
0 to 90%RH
0 to 95%RH
-40 to 176°F
(-40 to 80°C)
-40 to 176°F
(-40 to 80°C)
Accuracy
±0.9°F from 14 to 104°F
(±0.5°C from -10 to 40°C)
±5%RH
±0.9°F (±0.5°C )
±3%RH
±0.9°F
(±0.5°C)
±0.9°F
(±0.5°C)
Memory
8,191/channel
21,845/channel
32,767
32,767
Wireless
& 4/8
Channel
Loggers
Temperature &
Humidity Loggers
LogMaster
Price
TC4000
RTDTemp101
RFTemp101A
RFTC4000A
$199
$199
$199
$249
Temp logger, external
Thermocouple
Temp logger,
external RTD
Wireless temp logger,
internal
Wireless temp logger,
external Thermocouple
Type K: -418 to 2,501°F
(-250 to 1,372°C)
-328 to 1562°F
(-200 to 850°C)
-22 to 158°F
(-30 to 70°C)
Type K: -418 to 2,501°F
(-250 to 1,372°C)
Accuracy
±0.9°F
(±0.5°C )
to ±0.09°F
(to ±0.05°C)
±0.9°F
(±0.5°C)
±0.9°F
(±0.5°C )
Memory
16,383/channel
21,845
8,191
4,095/channel
RFRHTemp101A
RFRTDTemp101A
Quad- & OctRTD
Quad- & OctTemp
$269
$449
$599 / $999
$599 / $999
Wireless temp &
humidity, internal
Wireless temp logger,
external RTD
Temp logger,
4- or 8-channel,
external RTD
Temp logger,
4- or 8-channel,
external Thermocouple
-22 to 158°F (-30 to 70°C)
0 to 100%RH
-328 to 1562°F
(-200 to 850°C)
-328 to 1562°F
(-200 to 850°C)
Type K: -418 to 2,501°F
(-250 to 1,372°C)
Accuracy
±0.9°F (±0.5°C )
±3%RH
to ±0.09°F
(to ±0.05°C)
±0.18°F (±0.1°C)
±0.9°F
(±0.5°C)
Memory
5,461/channel
5,461
21,845/10,992
26,214/14,563
Description
Range
Wireless & 4/8
Channel Loggers
LogMaster
Price
Description
Range
23 | Industrial Catalog
www.thermoworks.com
1-800-393-6434
LOGMASTER LOGGERS
Rugged/
Submersible
Loggers
LogMaster
MicroTemp
TCTemp1000
HiTemp150FP-TSK
$199
$299
$549
Submersible logger, mini
Submersible logger,
removable Thermocouple
Hi temps, thermal shield
w/ external probe
-40 to 176°F
(-40 to 80°C)
Type K: -418 to 2,501°F
(-250 to 1,372°C)
-40 to 482°F
(-40 to 250°C)
Accuracy
±0.9°F (±0.5°C)
±0.9°F (±0.5°C)
±0.9°F (±0.5°C)
Memory
32,767
16,383/channel
32,767
Temp1000P
Temp1000S
Cryo-Temp
$399
$499
$199
Submersible logger,
7" fixed probe, RTD
Submersible logger,
1" fixed probe, RTD
Splash-proof logger,
for low temperatures
-148 to 500°F (-100 to 260°C)
-40 to 302°F (-40 to 150°C)
-122.8 to 95°F (-86 to 35°C)
Accuracy
±0.9°F (±0.5°C)
±0.9°F (±0.5°C)
±1.8°F (±1°C)
Memory
32,767
32,767
32,767
ThermoVault 1000P
ThermoVault
Quad/Oct ThermoVault
$1499
$999
$1500/$1699
Description
Submersible logger, 7" probe,
RTD, SST enclosure
Oven temp logger,
Max temp 752°F (400°C)
Oven temp logger,
4 or 8 channels
Range
-148 to 500°F (-100 to 260°C)
-40 to 752°F (-40 to 400°C)
-4 to 662°F (-20 to 350°C)
Accuracy
±0.9°F (±0.5°C)
±0.9°F (±0.5°C)
±0.9°F (±0.5°C)
Memory
32,767
32,767
500,000+/channel
Price
Description
Range
Rugged/
Submersible
Loggers
LogMaster
Price
Description
Range
ThermoVault
Loggers
LogMaster
Price
LogMaster Software
• Real time recording via Serial, USB or Wireless
• Real time alarm notification
• Send email or phone text for alarms
• Real time auto save to text file
• Multiple graph overlay for profiling
• Display multiple engineering units
• Data summary statistics
• Digital calibration of loggers
LogMaster software suite interfaces with all
IFC200 Software & Cable Kit
LogMaster loggers.
• Data recall and export
• Customizable graphs
To Order
• Quick links to start and stop logging
IFC200
USB Cable & LogMaster Software
$119
RFC101A Wireless Interface & LogMaster Software $199
IFC300
Cryo-Temp dock & LogMaster Software
$89
1-800-393-6434
www.thermoworks.com
Industrial Catalog | 24
LOGTAG DATA LOGGER
LogTag Transit Recorder
• Hi/low alarms with indicator
• Push button log start
• Real-time clock for time stamp recording
• IP65 waterproof rating
• Range from -40 to 185°F
• 8,000 reading memory capacity
• 2 to 3 year battery life
• Supports FDA 21 CFR Part II
• Inspection marking during log
Specifications
Range
-40 to 185°F / -40 to 85°C
<±0.5°C for -20 to 40°C.
<±0.7°C for -20 to -30°C & 40 to 60°C
Accuracy
<±0.8°C for -30 to -40°C & 60 to 80°C
< 0.1°C for -40 to 40°C,
Resolution
< 0.2°C for 40 to 80°C
Capacity
8,000 readings
Sample Rate
Adjustable, 30 sec. to several hours
Waterproof Rating IP65
3V lithium, replaceable by technician, 2
Battery
to 3 years typical
3.4" (H) x 2.1" (W) x 0.33" (D)
Dimensions
86mm (H) x 54.5mm (W) x 8.6mm (D)
1.2 oz. /35 g.
Weight
Record temperature data for easy download to your
PC with our new Logtag temperature logger. Program
a start time or simply press start on the logger and
record up to 8,000 readings with date and time stamp
for quick download to your PC.
With a built-in alarm indicator you can quickly see
if an alarm condition exits during your recording
session. With an IP65 waterproof rating, and at
about the size of a credit card, these handy loggers
can record temperatures from -40 to 185°F in the
harshest environments.
During logging sessions inspection marks can be
created at the press of a button. The software displays
the inspection marks, and summary data is created
for data recorded between marks.
Download data with high speed via USB interface
cradle which includes Logtag Analyzer software. The
software supports displaying and printing data in
chart, list, and summary form and allows multiple
charts to be overlaid for comparison. It also supports
FDA 21 CFR part 11 digital signatures.
Download logged data to your PC with the USB cradle.
Display and print data in chart, list and summary form. Save to files,
overlay multiple logs, automatic emailing of files, and supports FDA
21 CFR part 11. Inspection and download marks are displayed.
Call for volume discounts!
To Order
TRIX-8
LogTag Transit Logger
TRIX-8-10 LogTag Transit Logger, 10-pack
LTI/USB
LogTag USB Interface Cradle / Software
25 | Industrial Catalog
www.thermoworks.com
$34
$299
$60
1-800-393-6434
USB LOGGERS
USB Loggers
TW-USB-1-PRO
TW-USB-2-LCD
TW-USB-2-LCD+
TW-USB-2+
TW-USB-2
TW-USB-1
• Records temperature, humidity,
and dew point
• Built-in USB connection (no cables)
• Low cost, simple to use
• LED alarm indication
• Waterproof (see chart for modelst)
• Software included in price
TW-USB-RT
TW-USB-TC
TW-USB-TC-LCD (not shown)
Shown with 113-181 Needle Probe, not included
Download directly to your PC. No extra cables,
dongles, or docks to buy. And the software is
included! With loggers starting at just $59, our
USB series make great entry-level data loggers.
The software is so easy to setup and so simple that
anyone can log and record data in minutes. Order
now and you can be logging data tomorrow.
TW-USB-1
TW-USB-1-PRO
Stainless Steel
TW-USB-2 /
TW-USB-2-LCD
TW-USB-2+ /
TW-USB-2-LCD+
TW-USB-RT
TW-USB-TC /
TW-USB-TC-LCD
Price:
$59
$149
TW-USB-2: $82
TW-USB-2-LCD: $89
TW-USB-2+: $110
TW-USB-LCD-2+: $119
$75
TW-USB-TC: $81
TW-USB-TC-LCD: $99
Input:
Temperature
Temperature
Temperature,
Humidity,
Dewpoint;
LCD Display
(on LCD unit)
Temperature,
Humidity,
Dewpoint;
LCD Display
(on LCD unit)
Real-time
Temperature,
Humidity,
Dewpoint
Temperature:
K, J, or T Type
Thermocouple;
LCD Display
(on LCD unit)
Operating
Range:
-31°F to 176°F
-35°C to 80°C
-40°F to 257°F
-40°C to 125°C
Temp:
-31°F to 176°F
-35°C to 80°C
Humid: 0% to 100%
Temp:
-31°F to 176°F
-35°C to 80°C
Humid: 0% to 100%
Temp:
+14°F to 140°F
-10°C to 60°C
Humid: 0% to
100%
+14°F to 104°F
-10°C to 40°C
Measurement
Range:
-31°F to 176°F
-35°C to 80°C
-40°F to 257°F
-40°C to 125°C
Temp:
-31°F to 176°F
-35°C to 80°C
Humid: 0% to 100%
Temp:
-31°F to 176°F
-35°C to 80°C
Humid: 0% to 100%
Temp:
+14°F to 140°F
-10°C to 60°C
Humid: 0% to
100%
-328°F to 2372°F /
-200°C to
1300°C for K
type depending
on thermocouple
used.
Accuracy:
±2°F / ±1°C
Temp:
±0.4°F /
±0.2°C
Temp:
±1°F / ±0.5°C
Humid: ±3%
Dewpoint: ±2°F /
±1.1°C
Temp:
±0.6°F / ±0.3°C
Humid: ±2%
Dewpoint: ±2°F /
±1.1°C
Temp:
±3°F / ±1.5°C
Humid: ±4.5%
Dewpoint: ±5°F /
±2.5°C
±2°F / ±1°C
User selectable
10s to 12h
User selectable
1s to 12h
User selectable
10s to 12h
User selectable
10s to 12h
1 second fixed
User selectable
1s to 12h
N/A - powered by
USB port. Must
remain connected.
3.6V 1/2AA /
6 month life
Temp: 1°F / 0.5°C
Humid: 0.5%
1°F / 0.5°C
Email, text, audible
PC alerts
Red/Green LED
Stores 7 days to
PC file
32,510 readings
Sample Rate:
Battery/
Battery Life:
Resolution:
3.6V 1/2AA / 1 year life
1°F / 0.5°C
0.2°F / 0.1°C
Alarm
Status:
Temp: 1°F / 0.5°C
Humid: 0.5%
Red/Green LED
Interface:
Memory:
Logging
Start:
IP Rating
USB
16,328 readings
32,510 readings
16,328 readings per channel
Delay or
immediate
Delay or
immediate
Delay or
immediate, and
push-button on
LCD unit
IP67
IP67
IP67
(TW-USB-2 only)
Plugs directly into USB port. No cables,
dongles, or docks.
1-800-393-6434
Temp: 1°F / 0.5°C
Humid: 0.5%
Delay or immediate,
and push-button on
LCD unit
Real time
Delay or
immediate, and
push-button on
LCD unit
IP67
(TW-USB-2+ only)
na
na
Software is included. Very easy to use.
www.thermoworks.com
Plug any type K, J, or T thermocouple
into the TW-USB-TC logger to extend the
range to 2,000°F. See pages 8-12
Industrial Catalog | 26
TandD LOGGER SERIES
Wireless and Network-Ready Loggers
• Wireless and water
resistant models with
display
• Network ready models
(wireless or ethernet)
• Email and text alerts in
real-time
• Temperature and humidity
• RTD model (RTR-52Pt)
logs to 1100°F
TR-5 Series (non-wireless)
For data logging in harsh environments
with a convenient temperature display
select a TR-5 Series logger. Choose from
one channel internal (TR-51S) or one
channel external (TR-52S) with optional
probes for measurements to 311°F.
With an IP Rating to IP67 and IP64
respectively, you can measure anywhere
in the factory, greenhouse, or outdoors.
RTR-52Pt
$199
$229
1 Internal
1 External
(optional probes below)
1 Internal
-40 to24"
176°F
(-40 to 80°C)
-76 to 311°F
(-60 to 155°C)
-40 to 176°F
(-40 to 80°C)
-76 to 311°F
(-60 to 155°C)
-327 to 1,112°F
(-199.9 to 600°C)
32 to 131°F (0 to 55°C)
10 to 95%RH
±0.9°F (±0.5°C)
to ±0.9°F (±0.5°C)
±0.9°F (±0.5°C)
to ±0.9°F (±0.5°C)
to ±0.9°F (±0.5°C)
to ±0.5°F (±0.3°C)
±5%RH
IP64
IP64
IP67
IP64
IP67
16,000 readings
16,000 readings
16,000 readings
4 years max.
4 years max.
General Purpose Probe, -50 to 200°C
1.2"
79"
0.12"
7.25"
Economical Type
Measurement Range: -50 to 200°C
Thermal Constant Time: Model
Range
Price
In agitated water: about 4.5 seconds **1
Sensor Type
TR-8100-4
-76 to
311°FEconomical Type
$73
(-60 to
Regular
Type Range: -50 to 200°C
Measurement
Measurement
Range:
-50 to 350°C
Thermal Constant
Time:
155°C)
High Temperature Probe, -200 to 600°C
2.75"
1.2"
79"
2.75"
1.2"
79"
TR-7U Series (USB download)
To monitor temperature, humidity, and barometric
pressure. Start and stop recording from front
panel. Download via USB. Optional COM port for
downloading to handheld data collector (RTR‑57U).
-50 to 200°C
(1)
118"
79”
(2)
1.97”
50mm
-70 to 180°C
(3)
Price
±0.27°F @ 32°F
(±0.15°C @ 0°C)
$99
±0.27°F @ 32°F
(±0.15°C @ 0°C)
$179
(6)
(4)
40mm
1.6”
79”
∅ 0.32”
(2)
(1)
-200 to 600°C
(3)
1.6”
50mm
1.97”
(6)
(4)
-70 to 180°C
79”
TR-7W Series (network ready: 10/100 ethernet)
Connects directly to network. View temperature and
(5)
(1)
(6)
humidity
in(2)web browser.
Two channels
for temperature
(TR-71W) or temperature and humidity (TR-72W). Plug
into an AC outlet with a built-in data backup battery.
98
∅ 0.32”
1.97”
50mm
-200 to 600°C
-70 to 180°C
98
Handy Type
Measurement Range: -50 to 200 °C
Thermal Constant Time:
In agitated water: about 2.5 seconds **1
Accuracy
-70 to 180°C
High Temperature RTD Probe, -200 to 600°C
8”
Low to High Temp Type
Handy
Type Range: -200 to 600°C
Measurement
Measurement
Range:
-50 to 200 °C
Thermal Constant
Time:
Thermal
Constant
Time:
In agitated
water:
about 2 seconds **1
In agitated water: about 2.5 seconds **1
0.12"
Protection Pipe Cable
40mm
8”
Thermal
Constant
Time:
In agitated
water:
about 2 seconds **1
In agitated water: about 2 seconds **1
0.12"
6 months
General Purpose RTD Probe, -50 to 200°C
TR-8120-8
-76 to
311°FRegular Type
$91
Low
to High Temp
Type
(-60 to
Measurement
Range:
-50 to 350°C
Measurement
Range:
-200 to 600°C
Thermal Constant
Time:
155°C)
8,000 readings/channel
1.97”
Length
Description
-50 to 200°C
4”
Thermal
Constant
Time:
In agitated
water:
about 4.5 seconds **1
In agitated water: about 2 seconds **1
TR-5420
Type Protection Pipe
Diameter
8
TR-5220
6 months
79”
8
Description
6 months
4”
RTR-52Pt Optional Probes
1 External Temp
1 External Humidity
IP64
readings
14
0.12"
Model
6 months
Sensor Type
Sensor Types
∅ 0.125”
Battery Life
7.25" Optional
1.2"
79"
TR-52 & RTR-52
Probes
Type Protection Pipe Protection Pipe Cable
16,000
16,000
DiameterreadingsLength
∅ 0.125”
0.08"
IP Rating
Capacity
Sensor Types
24"
∅ 0.08”
Accuracy
0.08”
0.08"
Range
RTR-53
$299
1 External
1 External RTD (3-wire)
(optional probes below) (optional probes below)
50mm
14
2C30
RTR-52
$179
∅
60
420
RTR-51
$149
60
5420
TR-52S
$129
0.08"
220
TR-51S
Price
0.08"
5220
RTR-5 Series (wireless)
Wireless data logging with a water resistant housing, convenient
display, external thermistor or RTD probes, and humidity as an
option has never been easier. Connect any RTR-5 logger to a
network with our RTR-5W network hub and get email or text alerts
in real-time anywhere in the world (requires a global IP address).
Harsh environments are no problem as well at temperatures
beyond 1000°F. With optional AC adapter and extended battery
packs you’ll always be logging. The wireless handheld data
collector (RTR-57U) gathers up to 250 logs. Thousands of units
can connect in on the same wireless receiver.
Model
Channels
5106
106
• Stores up to 16,000
readings
• LED alarm indication
• Optional handheld wireless
collector
• Optional AC power and
extended batteries
• New CFR 21 part II
compliant software
(optional)
(1)
118"
(2)
(5)
(6)
C30
Models
TR-71U
TR-72U
TR-73U
TR-71W
$249
$299
$359
$479
$529
Channels
2: 1 int. and 1 ext. or
2 external
2: 1 temperature
1 humidity
3: 1 temperature, 1 humidity,
1 barometric pressure
2 external temperature
2: 1 external, 1 humidity
Range
Int: 14 to 140°F
Ext: -40 to 230°F
Opt: -76 to 311°F
(call for opt. probes)
Int: 14 to 140°F
Ext: 32 to 122°F
RH: 10 to 95%
Int: 14 to 140°F
Ext: 32 to 122°F
RH: 10 to 95%
750 to 1100hPa
Ext: -40 to 230°F
Opt: -76 to 311°F
(call for opt. probes)
Ext: 32 to 122°F
RH: 10 to 95%
Price
TR-72W
Accuracy
to ±0.9°F (±0.5°C)
to ±0.9°F (±0.5°C)
±5%RH
to ±0.9°F (±0.5°C)
±5%RH; ±1.5hPa
to ±0.9°F (±0.5°C)
to ±0.9°F (±0.5°C),
±5%RH
Capacity
8,000 readings/channel
8,000 readings/channel
8,000 readings/channel
8,000 readings/channel
8,000 readings/channel
1 year battery
1 year battery
10 month battery
AC adapter with
data backup battery
AC adapter with
data backup battery
Power
27 | Industrial Catalog
www.thermoworks.com
1-800-393-6434
TandD LOGGER SERIES
Data Collectors
TR-50U
Communications Cradle
Data Collectors
RTR-50
Wireless Receiver/Transmitter
RTR-5W
Wireless Network Base Station
$299
$419
$349
$579
TR-51S, TR-52S
RTR-5 Series loggers
RTR-5 Series loggers
RTR-5 Series loggers
Price
For Models
RTR-57U
Handheld Data Collector
USB
USB
USB
Ethernet
Logger Conn.
Optical
Wireless
Wireless
Wireless
Software
Included
Included
Included
Included
20s download of full data
Stores 250 logs, 256K readings,
300 foot range, 2 AAA batteries,
Auto-off, Optional AC.
PC Conn.
Other
web server for public acAC power or 2AA batteries, 300 feet Built-in
Monitor and setup via internet
per repeater up to 250 units, Monitor cess,
Email server for warning
in real-time with email alerts, Auto- browser,
emails, Real-time monitoring and
download on timed interval.
auto-downloads.
RTR-5 Wireless Logger
Setup Options
TR-71/72W Network-Ready
Setup Options
ADMINISTRATION
(email alert)
ADMINISTRATION
(email alert)
RTR-51
ETHERNET
RTR-50
USB
TR-72W
ROUTER
RTR-52
INTERNET / LAN
USB
ETHERNET
RTR-57U
RTR-52Pt
TR-71W
RTR-5W
RTR-53
ROUTER
RTR-61 Wireless HACCP Recording Thermometer
Main Temperature Display
• Stores HACCP data electronically
• Stores 1,800 readings to memory
• Transmits data to PC or network hub
• IP64 dust/water resistant
• Range to 455°F (235°C)
• Add fixed wireless loggers to same network
The new RTR-61 is a handheld
recording thermometer with wireless
capability. Now you can record
anywhere in the restaurant or factory
and send the data wirelessly to your
PC or network hub.
Record date, time, operator,
temperature, and food item with every
data point for your HACCP program.
No more notebooks or manual records.
No more guessing, fudging, or
reworking reports. The data is stored
electronically and easily saved in text
format for easy reporting.
1-800-393-6434
RTR-61
Specifications
Price
$449
Range
-13 to 455°F (-25 to 235°C)
Accuracy
to ±0.9°F (±0.5°C)
Capacity
1,800 data readings
Battery
Interface
Water Resistance
1 - Current date and time
2 - Operator
3 - Food Item name
4 - Current temperature
5 - Remote mode
6 - Temperature units
7 - Recording mode
8 - Battery status / wireless comms
Data Preview Display
AAA x 2; Alkaline, NiCd, NiMH
Wireless or Optical
IP64 (dust/splash resistant)
Data Collectors RTR-61SK $359; RTR-61SK-W $359
www.thermoworks.com
Shows date, time, reading,
number, food item, operator,
temperature, and pass/fail result.
Industrial Catalog | 28
HIGH ACCURACY PDA PROBE ±0.05°C
PDA Reference Probe & Data Logger
• Accuracy to ±0.05°C
• Probe includes software (PDA sold separately)
• Download readings directly to Excel
• Connects to Symbol, iPAQ, or Recon PDA
• Range to 212°F, perfect for food measurements
• Optional software logs up to 100,000 readings
downloadable to Excel
Connect a ThermoWorks high accuracy PDA Probe to
your compatible PDA device and turn it into a high
accuracy reference system with accuracy to ±0.05°C.
We include the software that allows you to record
readings downloadable directly to Excel with date,
time, operator, and measuring location with pass/
fail results.
An ideal tool for every lab, the high accuracy PDA
Probe can be used to check the performance
of all of your thermometers. A NIST-Traceable
calibration certificate is included with test data
that confirms its performance. You’ll spend
thousands on a system that does half what our
PDA probe can do. Call us today to find out if
your PDA is compatible with one of our probes,
and get more out of your PDA investment.
PDA probe shown with Recon 200X
(sold separately).
ThermaPalm Lab
Datalogging Software (optional)
• Record 100,000 readings
• Store up to 100 logs
• Downloads to Excel file
• Set high and low alarm limits
• Multiple start and stop modes
PDA Main Screen
Specifications
Range
Accuracy
Turn your high accuracy PDA Probe into a data
logger and store 100,000 data points from up to 100
logs to your PDA. At your next Activesync, your data
is transferred to your PC and ready to import into
Excel. Set your recording interval from 1 second to 4
minutes with custom start and stop modes. Review
your data on the PDA in graphical or tabular format
before you synchronize.
Resolution is user selectable from 1.0 to 0.01°
depending on probe. With our high accuracy probe,
accuracies of ±0.05°C can be achieved for use
in calibration work. Put your PDA to use with our
temperature probes and data logging software.
29 | Industrial Catalog
Resolution
Probe
Response
Calibration
-76 to 392°F / -60 to 200°C
±0.05°C (±0.09°F) from –50 to 150°C
(-58 to 302°F)
0.01°F or °C
1/8" (∅) x 5" (L)
15-20 seconds in liquid
NIST-Traceable Certificate included
Call for PDA compatibility
To Order
294-120
294-130
294-140
294-110
294-295
www.thermoworks.com
High Accuracy PDA Probe for
RECON 200X with software
High Accuracy PDA Probe for
iPAQ 2210 with software
High Accuracy PDA Probe for
DELL AXIM X50/X51 with software
High Accuracy PDA Probe for
SYMBOL PPT8800 PDA with software
Thermapalm Lab Datalogging Software
for Windows Mobile
$259
$259
$259
$259
$199
1-800-393-6434
HACCP RECORDING SYSTEM
PDA Probe and HACCP
Temperature Recording System
• Probe includes software (PDA sold separately)
• Download readings directly to Excel
• Store readings with location, user, and
pass/fail limits
• Connects to Symbol, iPAQ, or Recon PDA
• Range to 212°F, perfect for food measurements
Finally, there’s a HACCP recording system that
anyone can set up and use. Simply type in your list of
users and food items with their danger zone limits on
the PC and sync it to your PDA.
The PDA probe gives you the accurate temperature
and all you need to do is attach that to your list of
food items. It’s that simple. The next time you sync
the PDA you’ll have a report of all readings and
documented pass/fail results. No IT department
needed!
Auto Off Disabled
6/20/08 3:31:49 PM
Operator: Chef Fisher
74.2 ºF
Label/Item:
PDA probe shown with Recon 200x PDA
(sold separately).
Cold Meat Storage
▼
High Limit: 50.0 ºF
Low Limit: 40.0 ºF
Software Features
• Stores date, time, operator
• Stores food item, temp, pass/fail
• Visual and audible alert to user in “danger zone”
• Quick PC utility stores profiles
• Downloads directly to Excel via Active Sync
• Saves files to any pre-set directory or network drive
• Stores by day, week, month, PDA
Specifications
• Manages multiple PDAs
Range
Accuracy
Resolution
Probe
Response
Calibration
Store
Reading
View
Readings
PDA Main Screen
-4 to 212°F / -20 to 100°C
±0.9°F / 0.4°C
0.1°F or °C
1/8" (∅) x 4" (L), reduced tip
5 to 6 seconds
NIST-Traceable Certificate included
Call for PDA compatibility
To Order
294-221
294-231
294-241
294-211
Download directly to Excel
294-271
294-280
1-800-393-6434
www.thermoworks.com
Fast Response PDA Food Probe for
RECON 200X with software
Fast Response PDA Food Probe for
iPAQ 2210 with software
Fast Response PDA Food Probe for
DELL AXIM X50/X51 with software
Fast Response PDA Food Probe for
SYMBOL PPT8800 PDA with software
Fast Response PDA Food Probe for
SYMBOL MC70 PDA with software
Fast Response PDA Food Probe for
SYMBOL MC9000 PDA with software
$179
$179
$179
$179
$278
$179
Industrial Catalog | 30
Stainless Steel
Overbraid
7"
ALARM THERMOMETERS
0.16"
0.1"
Stainless Steel
Overbraid
EcoTemp Alarm Thermometer
Optional Probes
810-955 Optional Oven Probe
7"
• Audible & Visual High/Low Alarms
• Max/Min, Hold & °C/°F Functions
• One penetration probe is included
• Interchangeable probes
0.16"
0.1"
Stainless Steel
Overbraid
0.6"
Removable
Suction Cup
810-952 Optional Wire Probe
0.2"
0.6"
Buy 5: $29 each
Removable
Suction Cup
0.2"
810-951 General Purpose Probe (included)
5"
0.125"
5"
0.6"
Specifications
General purpose probe included (810-951).
Rubber boot optional.
The EcoTemp is a truly easy-to-use, handheld
thermometer with a really big display. You get 0.1°
resolution, °C/°F switchability, max/min, and hold
button. And that’s not all! We’ve included a high/low
alarm. After an alarm sounds, it will stop again when
the temperature returns to acceptable limits. One
handheld probe is included with each thermometer.
Get the protective PVC boot to extend the life of your
thermometer.
0.125"
-58 to 392°F / -50 to 200°C
±0.1°F or °C
±1.8°F / 1°C from -58 to 302°F / -50 to 150°C
Thermistor
5"
Switchable °C or °F
0.125"
Range
Resolution
Accuracy
Sensor
Units
To Order
810-960
810-955
810-952
810-951
830-215
836-052
EcoTemp Alarm Thermometer
Oven Penetration Probe (optional)
Wire Probe (optional)
Spare Penetration Probe
Protective PVC Boot, Black
Probe Wipes—Large Tub of 200
TW8060
2K Two-Channel Thermocouple With Alarm
NEW!
Removable
Suction Cup
0.2"
$39
$9
$9
$9
$9
$10
Available July 2010
• Programmable hi/low alarms
• Ideal oven alarm
• Backlit display
• Audible alarm
• Simple button operation
Our new 2K is a simple-to-use 2-channel
thermocouple alarm thermometer with convenient
backlit display. An ideal cooking thermometer, the 2K
can monitor your food item and the oven temperature
simultaneously and alert you when it’s done. Also
records Max and Min temperatures of both channels
so you’ll know what limits were reached during your
process. A handy tool in a small, compact package.
Specifications
Range
Resolution
Accuracy
Probe
Battery
Accessories
Dimensions
TR-1
Optional tripod
To Order
2K, Two-Channel Thermocouple with
Alarm (probes sold separately, pg 7-12)
2K Tripod
TR-1
832-050 Wall Bracket
TW8060
Thermocouple Probes
See pages 7-12
31 | Industrial Catalog
-328 to 2372°F / -200 to 1300°C
Below 1000°C: 0.1° / Above 1000°C: 1°
-200 to -100°C: ±0.2% reading + 1°C
-100 to 1300°C: ±0.1% reading + 0.7°C
-328 to -148°F: ±0.2% reading + 2°F
-148 to 2372°F: ±0.1% reading + 1.4°F
Type K Thermocouples
3 x AAA
4.8" (L) x 2.4" (W) x 1.2" (H)
121mm (L) x 60mm (W) x 30mm (H)
www.thermoworks.com
$69
$9
$15
1-800-393-6434
POCKET DIGITAL THERMOMETERS
6032
Long Stem
Thermometer (8")
RT304
Water Resistant
Min/Max
Thermometer
RT600B
RT610B
Water Proof/Dishwasher Safe
Thermometer
T-Shaped Water Proof
Thermometer
RT301
Low-Cost
Thermometer
Most low-cost digital thermometers have fairly short
probes. Our 6032 Long-Stem model features an 8"
probe that is perfect in lab work, food production,
and countless applications where you need longer
immersion depth.
We improved our popular RT600 with a high
temperature rubber front panel seal and increased
the upper range. It’s water resistant at higher
temperatures so dishwasher use is no problem. With
MIN/MAX features.
This RT304 is a popular water-resistant thermometer
which stands up to wet hands and messy
environments. Great for general purpose temperature
measurements anywhere.
The RT610 is designed for easy forcing into meats
and semi-solids. It’s tough and water resistant.
Call for volume pricing!
Specifications
Range
Resolution
Accuracy
Probe
Units
Operating Range
Battery
Response
Water Resistance
The RT301 a tiny, pocket-sized thermometer with
big digits! You won’t have to squint or hold this one
close.
6032
RT304
RT600B
14 to 392°F
-10 to 200°C
±0.1°
±1.8°F / ±1°C
-58 to 392°F
-50 to 200°C
±0.1°
to ±1.8°F / ±1°C
-58 to 392°F
-50 to 200°C
±0.1° to 199.9°
to ±1.8°F / ±1°C
6032
$19
$15
RT304
$19
$15
RT600B
$19
$15
RT610B
RT301
-58 to 392°F
-58 to 302°F
-50 to 200°C
-50 to 150°C
±0.1°
±0.1°
±1.8°F / ±1°C
to ±1.8°F / ±1°C
0.197" (∅) x
0.137" (∅) x 8" (L) 0.137" (∅) x 4.75" (L) 0.137" (∅) x 4.8" (L)
0.125" (∅) x 5" (L)
4.9" (L), 0.137" (∅)
Switchable °C or °F Switchable °C or °F Switchable °C or °F Switchable °C or °F Switchable °C or °F
32 to 122°F / 0 to
32 to 122°F / 0 to
32 to 190°F / 0 to
32 to 122°F / 0 to
32 to 122°F / 0 to
50°C
50°C
88°C
50°C
50°C
2 x LR44
1 x LR44
1 x A76
1 x LR44
1 x LR44
10 to 15 seconds
10 to 15 seconds
10 to 15 seconds
10 to 15 seconds
10 to 15 seconds
IP65
IP67
IP65
IP66/67
na
To Order
Quantity:
1
5-up
1-800-393-6434
www.thermoworks.com
RT610B
$19
$15
RT301
1-9: $14
10-up: $11
Industrial Catalog | 32
SUPER-FAST POCKET THERMOMETERS
RT600C
Super-Fast Pocket Thermometer
6 Seconds!
• 5-6 seconds
• -40 to 302°F range
• Dishwasher safe to 190°F
• IP65 rating
• On/Off switch
• Max/Min function
• °C/°F switchable
Buy 5: $19 each
Specifications
We’ve improved our popular RT600B with a thinner
probe tip for a faster response. It’s also water
resistant at higher temperatures so dishwasher
use is no problem. MIN/MAX features record peak
dishwasher temperature. Includes probe cover and
pocket clip. You’ll find a lot of look-a-likes, but none
that can match the durability of our RT600C.
Range
Accuracy
Response
Resolution
Operating
Range
Water
Resistance
Battery
Dimensions
-40 to 302°F / -40 to 150°C
As high as ±1.8°F /±1°C, depending on temp.
Approx. 6 seconds from ambient to 32°F
0.1° between -19.9 to 199.9, otherwise 1°
32 to 190°F (0 to 88°C)
IP65
1 x A76
7.9" (L) x 0.9" (H) x 0.8" (D)
203mm (L) x 24mm (H) 20mm (D)
To Order
RT600C
Super-Fast Pocket Thermometer
$24
RT301WA
Super-Fast Pocket Thermometer
6 Seconds!
Buy 5: $24 each
A big digit display, water resistance, and calibration
adjustment are three big reasons to try our new
RT301WA. Add to that a new, thinner fast-response
probe and you have a thermometer great for HACCP
programs and daily use.
Specifications
• 5-6 seconds
• Adjustable calibration
• IP65 water resistant
• On/Off switch
• °C/°F switchable
• -40°F to 302°F Range
Range
Accuracy
Response
Resolution
Operating
Range
Water
Resistance
Battery
-40 to 302°F / -40 to 150°C
As high as ±1.8°F / ±1°C, depending on temp.
Approx. 6 seconds from ambient to 32°F
0.1° between -19.9 to 199.9, otherwise 1°
32 to 122°F (0 to 50°C)
IP65
1 x A76
1.9" (L) x 1.3" (H) x 1.1" (D)
Dimensions 49mm (L) x 35mm (H) 28mm (D), excluding
probe
To Order
RT301WA
33 | Industrial Catalog
www.thermoworks.com
Super-Fast Pocket Thermometer
$29
1-800-393-6434
DIAL THERMOMETERS
RT610B-12 & RT610B-24
Long-Stem Digital Thermometers
RT610B-24
24" probe
Specifications
RT610B-12
12" probe
• IP66/67 waterproof rating
• 12" or 24" heavy duty SST probe
• MIN/MAX memory
• HOLD feature
• Ideal for meat processing, composting
• °C/°F switchable
Range
Accuracy
Response
Resolution
Battery
Probe
RT610B-12
Probe
RT610B-24
-58 to 392°F / -50 to 200°C
±1.8°F / ±1°C over full range
Approx. 15 to 20 seconds in liquid
0.1° between -19.9 to 199.9, otherwise 1°
1 x LR44
0.197" (∅) x 12" (L), 0.137" (∅) at tip
5mm (∅) x 305mm (L), 3.5mm (∅) at tip
0.236" (∅) x 24" (L), 0.137" (∅) at tip
6mm (∅) x 610mm (L), 3.5mm (∅) at tip
To Order
RT610B-12 12" Long-Stem Digital Thermometer
RT610B-24 24" Long-Stem Digital Thermometer
$39
$49
Pocket Dial Thermometers
PT1438: 50 to 550°F, 1.75" dial thermometer, 8
x 1/8 inch stem. 5°F divisions, ±1%
accuracy, recalibrateable, pocket clip.
PT1005: 25 to 125°F, 1" dial thermometer, 5 x 1/8
inch stem. 1°F divisions, ±1% accuracy,
recalibrateable, pocket clip.
PT220: 0 to 220°F, 1" dial thermometer, 5 x 1/8
inch stem. 2°F divisions, ±1% accuracy,
recalibrateable, pocket clip.
PT1438
To Order
Dial Thermometer
50 to 550°F
Dial Thermometer
PT1005
25 to 125°F
Dial Thermometer
PT220
0 to 220°F
PT1438
PT1005
PT220
1-4:
$19 ea.
1-4:
$6 ea.
1-4:
$6 ea.
5-99:
$16 ea.
5-99:
$5 ea.
5-99:
$5 ea.
100-up:
Call
100-up:
$3 ea.
100-up:
$3 ea.
PT80
12" Fridge/Freezer Dial Thermometer
30 40
20
10
0
0
°C
-10
20
-20
-10
50
10
Fridge/Freezer
Thermometer
Maintain:
Fridge Below 40°F
Freezer Between -10 to 0°F
ww
w.t
her
mow
orks
.com
°F
• Large 12" diameter face
• Color-coded temperature zones
• Great for walk-in freezers and refrigerators
• Hangs on wall
• Dual scale °C & °F
60
70
80
705
6-7
-75
801
Specifications
PT80
Simple and easy to use, this thermometer is perfect
for walk-in freezers and refrigerators. Just hang it
on the wall and it’s easily readable from almost
anywhere in your walk-in. Order several for different
locations. Color-coded temperature zones show if
temperatures are out of range.
1-800-393-6434
Range
Size
Type
-10 to 80°F / -23 to 26°C
12" (∅) / 305mm (∅)
Bimetal
To Order
PT80
www.thermoworks.com
12" Fridge/Freezer Thermometer
$19
Industrial Catalog | 34
FRIDGE/FREEZER ALARMS
RT8100
Fridge/Freezer Alarm with Duration Counter
• Dual display for fridge and freezer
• Programmable alarm temperatures
• Alarm duration counter
• LED and audible alarms
• Magnetic attachment
• Max and Min function
Specifications
Our new RT8100 is a fully programmable two
channel fridge/freezer alarm thermometer. Insert one
probe in the freezer and one in the fridge, set the high
and low temperature limits, and the RT8100 alarms
when your product is outside your limits. Each
channel can be set to alarm at any temperature from
-40°F to 158°F.
Choose an audible or LED alarm. After 30 minutes
in alarm, a duration counter will tell you the elapsed
time since the alarm condition began. Min/Max will
also indicate the highest and lowest temperatures
reached during your monitoring cycle.
Range
Accuracy
Resolution
Default Alarm Limits
(user programmable)
Response
Alarm Resolution
Alarm Duration
Battery
Probe Cord Length
Display
Dimensions
-40°F to 158°F / -40°C to 70°C
±1.8°F / 1°C
0.1°
Fridge: 32 to 46.4°F / 0 to 8°C
Freezer: -40 to 0°F / -40 to 18°C
10 seconds
0.1°
99 hrs 59 min (starts after 30 min)
2 x AAA, included
39.4 / 1,000 mm
3.5" (W) x 0.63" (H)
90mm (W) x 16mm (H)
5.3" (W) x 1.77" (H) x 0.9"(D)
135mm (W) x 45mm (H) x 23mm (D)
To Order
RT8100
Dual Channel Fridge/Freezer Alarm
Thermometer
$29
RT8100MAT
Max/Min Recording Thermometer
NEW!
• Records Time & Date of MAX/MIN
• Dual Channels
• Range: -58 to 158°F / -50 to 70°C
• Programmable High and Low Alarms
• LED and Audible Alarms
• Magnetic Attachment
Specifications
New 2-channel alarm thermometer records the
high and low temperatures with a time and date
stamp. Monitor critical temperatures without the
need for expensive and complicated data loggers.
The audible alarm function allows you to program
high and low limits of your choice. The max/min
function independently records the peak and valley
temperatures reached at both sensors with date and
time. Use this unit for critical fridge/freezer temps,
indoor/outdoor, weather applications, gardening,
agriculture, greenhouses, composting, labs, research
applications and storage monitoring. No computers
required!
Range
Accuracy
Resolution
Response
Alarm Resolution
Time Accuracy
Time/Date Format
Calendar Period
Battery
Probe Cord Length
Display
Dimensions
To Order
RT8100MAT
35 | Industrial Catalog
-58 to 158˚F / -50 to 70˚C
±1.8°F / 1°C
0.1°
10 seconds
1°
±3 seconds per day
12-hour and month/day/year
2000 to 2099
2 x AAA, included
39.4" / 1,000 mm
3.5" (W) x 0.63" (H)
90mm (W) x 16mm (H)
5.3" (W) x 1.77" (H) x 0.9" (D)
135mm (W) x 45mm (H) x 23mm (D)
www.thermoworks.com
Dual Channel Fridge/Freezer
Alarm Thermometer
$29
1-800-393-6434
FRIDGE/FREEZER ALARMS
RT801
Digital Alarm Thermometer
• Range -58 to 158°F
• °C / °F Switchable
• Display Backlight
• Settable High/Low Alarm
• Min/Max Memory
• Internal and External Temperatures
Specifications
The new RT801 is perfect for monitoring
refrigerators, freezers, coolers, incubators, chambers,
aquariums—anywhere you want to make sure an
acceptable temperature range is maintained. Use
it as a safety alarm or to notify you when a desired
target temperature is reached.
If your alarm limits are exceeded, an audible beep
sounds for 5 seconds every minute. During the alarm
condition a visual indicator flashes on the screen.
If the temperature returns to normal, the visual
and audible alarm will stop. The Max/Min function
will continue to show you the highest and lowest
temperatures reached so you will know that an alarm
has occurred.
Internal Range
External Range
Accuracy
Resolution
Display
Alarms
Battery
Response
Probe cord length
Dimensions
14 to 122°F / -10 to 50°C
-58 to 158°F / -50 to 70°C
±1.8°F / 1°C
0.1°
1.9" (W) x 0.8" (H)
48mm (W) x 21mm (H)
High and low alarms settable in 1.8°F /
1.0°C increments
1 x AAA
10 seconds
39.4" / 1,000mm
2.9" (W) x 2" (H) x 0.6" (D)
73mm (W) x 52mm (H) 15mm (D)
To Order
RT801
Fridge/Freezer Alarm Thermometer
$19
RT8101 & RT8101E
Solar Thermometer
• Solar powered
• No batteries required
• External sensor (RT8101E only)
• -58 TO 158°F
• MIN/MAX memory
• °F / °C switchable
Specifications
Internal Range
External Range
Ambient Operating
Temperature
Accuracy
Resolution
RT8101
Display
RT8101E
Battery
Probe Cord Length
Install a digital temperature readout anywhere in
just seconds! Solar powered so there’s no battery
changes or power connections. The RT8101 features
an internal sensor for room temperature while
the RT8101E has an external probe to install in a
chamber or fridge. Easily mounted, professional
appearance. Max/Min and °C/°F buttons. Big digits
are easy to see across the room.
1-800-393-6434
Dimensions
Weight
32 to 122°F / 0 to 50°C
-58 to 158°F / -50 to 70°C (RT8101E
only)
32 to 122°F / 0 to 50°C
±2°F / 1°C
0.1°
1.9" (W) x 0.8" (H)
48mm (W) x 21mm (H)
Solar, requires 250 lux
39" / 1,000mm (RT8101E only)
2.5" (W) x 2.7" (H) x 0.5" (D)
64.3mm (W) x 68.3mm (H) 12mm (D)
1.4 oz. / 39.7 g.
To Order
RT8101
RT8101E
www.thermoworks.com
Solar Thermometer
Solar Thermometer with
External Sensor
$25
$29
Industrial Catalog | 36
pH METERS
Precision pH Meter with Replaceable Electrode
• ±0.05 pH accuracy
• Big LCD dual display
• IP65 water proof
• Easy electrode replacement
• One-touch auto-calibration up to 3 points
• Data hold function
NEW!
Specifications
pH Range
pH Resolution
pH Accuracy
Temp. Range
Temp. Resolution
Temp. Accuracy
Operating Temp.
Operating RH%
Sensor Life
Repacement Electrode VZ86P8AZ
Our new 8689 pH meter does everything that the
expensive models do at an affordable price. You get
auto temperature compensation, 3-point calibration,
±0.05 accuracy, IP65 water resistant rating, dual
display, and replaceable electrode.
Dimensions
Weight
Battery
0.00 to 14.00 pH
0.01 pH
±0.05
32 to 122°F / 0 to 50°C
0.1
±0.5°C
32 to 140 °F / 0 to 60°C
<80%
>6 months (with good maintenance)
6.9" (H) x 1.5" (W) x 1.5" (D)
176mm (H) x 39mm (W) x 39mm (D)
3.9 oz. / 110g.
4 x LR44
To Order
8689
VZ86P8AZ
Precision pH Meter
Replacement Electrode
$85
$29
pH Spear
• Penetrate meat, cheese, fruit, etc…
• Waterproof rating to IP67
• Accuracy to ±0.01pH
• Replaceable electrode
Great for testing food pH with high accuracy.
Replaceable electrode allows long term use. Plastic
electrode body prevents broken glass during food
testing and resists clogging & contamination. Push
button 3-point calibration.
Specifications
Range
Resolution
-1.00 to 15.00 pH
0.01 pH
±0.01 pH at room temperature,
Accuracy
±0.05 at temperature extremes
Select up to 3 pts (USA: 4.01, 7.00,
Calibration
10.00 or NIST: 4.01, 6.86, 9.18)
Operating Temp.
0 to 50°C
Temp. Compensation None
On/Off or auto-off after 8 min., Hold,
Functions
Cal and Confirm
Battery
4 x 1.5V LR44, 500 hours
Dimensions
6.5" (H) x 1.5" ∅.
To Order
Calibration Kit WD-35624-70
37 | Industrial Catalog
WD-35634-40 pH Spear
WD-35634-50 Replacement Electrode
WD-35624-70 Calibration Kit
www.thermoworks.com
$297
$176
$40.00
1-800-393-6434
pH METERS
Low-Cost pH Meter
±0.3pH
Waterproof pH Meter
±0.2pH
Precision pH Meter
±0.05pH
8681
8680
8682
• Waterproof
• One-touch auto-calibration
• Up to 3 point cal 4,7,10
• Cal values adjustable
• Data hold function
• Auto power-off
• Waterproof
• Auto-temp compensation
• One-touch auto-calibration
• Up to 3 point cal 4,7,10
• Cal values adjustable
• Data hold function
• Auto power-off
• °C/°F switchable
• Waterproof
• Auto-temp compensation
• One-touch auto-calibration
• Up to 3 point cal 4,7,10
• Cal values adjustable
• Data hold function
• Auto power-off
• °C/°F switchable
You can’t beat this price. Simple to
use and waterproof.
Choose this model for professional
performance, durability and still
a great price. Auto temperature
compensation ensures good
accuracy. Dual display shows
temperature and pH at the same time.
Easily your best value in a pocketsized, waterproof pH pen with
high precision. Auto temperature
compensation with excellent
accuracy. Dual display shows
temperature and pH at the same time.
Specifications
Accuracy
Range
Resolution
Temp.
Accuracy
Temp.
Resolution
Ambient
Operating
8680
8681
8682
±0.3pH
2.0 to 12.0 pH
0.1 pH
±0.2pH
0 to 14 pH
0.1 pH
±0.05pH
0 to 14 pH
0.01 pH
-
±1°C
±0.5°C
-
0.5°C/0.5°F
0.1°C/0.1°F
0 to 50°C,
0 to 80% RH
1.42" (W) x
6.3" (H) x
0.98" (D)
Button cell
4 x LR44.
0 to 50°C,
0 to 80% RH
1.42" (W) x
6.3" (H) x
0.98" (D)
Button cell
4 x LR44.
0 to 50°C,
0 to 80% RH
1.42" (W) x
6.3" (H) x
0.98" (D)
Button cell
4 x LR44.
IP65
IP65
IP65
Dimensions
Battery
Water
Resistance
Zipper Wallet
830-001
Handheld
Fits comfortably in your
hand or shirt pocket.
To Order
8680
8681
8682
830-001
Low-Cost Waterproof pH Meter, 0.3pH
Waterproof pH Meter, 0.2pH
Precision pH Meter, 0.05pH
Protective Zipper Wallet
$39
$49
$75
$8
pH Calibration Solutions
To Order
WDpH Buffer solution 4.01, 500ml
00654-00
WDpH Buffer solution 7.00, 500ml
00654-04
WDpH Buffer solution 10.00, 500ml
00654-08
pH Buffer Pouch assortment pack
WD20ml pouches, 5 each of 4.01, 7.00 &
35653-04
10.00 plus rinse solution
pH Solution Assortment, 500ml
WDbottles, 1 each of 4.01, 7.00 & 10.00,
05942-15
rinse/clean solution, storage solution
1-800-393-6434
www.thermoworks.com
$13
$13
$13
$30
$49
Industrial Catalog | 38
HUMIDITY
6000 Series Humidity Meters
6000
• Integral or remote probe
• High accuracy – 2%rh
• Min/Max and dew point
• 10,000 hour battery life with auto-off
• Small lightweight ergonomic design
• Robust Lumberg connector (6100)
6100
Specifications
Range
Resolution
Accuracy
Temp Sensor
Humdity Sensor
Battery
Auto-Off
Display
Weight
Dimensions
Calibration
Designed for critical applications in aerospace,
pharmaceutical, metrology and environmental
monitoring, our new 6000 series are precision
instruments. With accuracy to ±2%rh over the
full range 0 to 100%, you’ll be confident in your
measurements with a display resolution of 0.1%.
Even use these meters to check other RH devices.
A clear LCD display shows humidity, temperature,
and dew point with added features like Hold and Min/
Max. Both models are powered by three 1.5V AAA
batteries with a life expectancy of 10,000 hours and
an auto-off feature that maximizes battery life.
-4 to 122°F (-20 to 50°C) / 0 to 100% RH
0.1°F or °C / 0.1%RH
±1°F ±1 digit / ±2% (10 to 90% RH)
Silicone Bandgap
Capacitance Polymer
3 x AAA, Min. 5 yrs (10,000 hrs.)
After 10 minutes
.5" (12mm) LCD
4.6 oz. (130g.)
1" x 2.2" x 5" (25mm x 56mm x 128mm)
NIST-Traceable Calibration Cert. (optional)
To Order
For external monitoring of chambers. A remote
climate probe is available with our 6100 hygrometer.
Each probe is equipped with a 6-pin screw-down
Lumberg connector. Probes are interchangeable
without requiring recalibration.
224-600
224-610
830-253
832-050
224-615
CAL-RH2PT
6000 RH Meter w/integral probe
6100 RH Meter w/external probe
Protective Rubber Boot
Wall Mounting Bracket
Spare Probe for 6100 Meter
2-point RH Calibration Certificate
$109
$159
$12
$15
$69
$65
Accessories
Rubber Boot
830-253
39 | Industrial Catalog
Wall Bracket
832-050
www.thermoworks.com
Optional Calibration Certificate
CAL-RH2PT
1-800-393-6434
CALIBRATION GEAR
Reference Thermometer
• Certified accuracy to ±0.4°F / ±0.2°C
• Includes 5-point traceable cal cert
• Meets high accuracy requirements in dairy,
pharmaceutical, and other critical industries
• Great choice for inspectors and auditors
• Attached probe is calibrated with the meter to
ensure high “system” accuracy
Specifications
-148.0 to 199.9°F / -148.0 to 199.9°C
0.1°F or °C
±0.2°C (±0.4°F)
0, 32, 104, 158, and 199°F
-18, 0, 40, 70 and 100°C
100 ohm platinum RTD, 1/10th DIN, 5"L x
1/8" dia. S.S. general purpose probe type
9V, 200 hours
5.8" (H) x 3.15" (W) x 1.42" (D) /
147mm (H) x 80mm (W)x 36mm (D)
NIST-Traceable Certificate included
Range
Resolution
Accuracy
Cal Points
Probe
This thermometer features a high stability platinum
RTD sensor rated at 1/10th the conformance limits of
the DIN specification. The general purpose probe is
attached to a high precision resistance thermometer
that provides 0.1° resolution. The combination is
calibrated as a system to minimize all errors and the
final deviations are given for five temperatures on the
included calibration certificate.
Battery
Dimensions
Calibration
To Order
222-005
222-505
Reference Thermometer °C
Reference Thermometer °F
$279
$279
DT-3321 Precision Humidity Meter
• High accuracy (±2%)
• Fast response time
• Large dual display
• Backlight
• Temperature, humidity,
dew point, wet bulb, and
mixing ratio
• Foam-lined storage case
included
This professional
hygrometer features fastresponse relative humidity
and temperature sensors
with exceptional precision.
Others charge considerably
more for ±2% RH accuracy.
The well-designed DT-3321
feels good in the hand. It’s
compact, lightweight and
easier-to-use than other
hygrometers, pyschrometers
and humidity meters.
Specifications
Range:
Humidity
Temperature
Dew Point Temp
Wet Bulb Temp
Mixing Ratio
Resolution: Humidity
Temperature
Dew Point Temp
Wet Bulb Temp
Mixing Ratio
Accuracy: Humidity
Temperature
Dew Point Temp
Wet Bulb Temp
Mixing Ratio
Display
Response Time
Battery Life
Size
Auto Shutoff
Weight
Includes
0 to 100%RH
-22 to 199°F / -30 to 100°C
-22 to 199°F / -30 to 100°C
32 to 176°F / 0 to 80°C
0 to 500GPK / 0 to 3500GPP
0.1%RH
±1°F/C
±1°F/C
±1°F/C
0.1GPK / GPP
to ±2%RH
±0.9°F/0.5°C
±1.8°F/1°C
±1.8°F/1°C
±3%GPK / ±3%GPP
Dual LCD. 0.5s update
<15s (90% of value in moving air)
3 x AAA, 48 hours continuous use
2.5" W x 9.4" H x 1.1" D
63mm W x 240mm H x 28mm D
After 10 min; can be disabled
7 oz. / 200 g.
Batteries, storage case
To Order
DT-3321
CAL-RH2PT
1-800-393-6434
www.thermoworks.com
Precision Hygro-Thermometer
2-point RH Calibration Certificate
$129
$65
Industrial Catalog | 40
CALIBRATION GEAR
P650 / P650EX / P655
Precision Handheld
Reference Thermometers
±0.03°C Accuracy
• ±0.03°C system accuracy
• NIST-Traceable certificate provided
• Dual line display with differential function (P655)
• Probes include unique calibration code
• Fast-mode displays 4 readings per second
• New intrinsically safe model (P650-EX)
Save your budget with this affordable NIST-Traceable
thermometer. Use this series for calibration of other
thermometers, process validation, or for precision
research. Change probes anytime by entering each
probe’s calibration code into the meter. Calibration
certificates are included with each. Choose the single
channel P650 for budget savings. Also available in
the Intrinsically Safe version, P650-EX. Or, choose
the P655 dual channel model. All include an RS232
interface (software and cable optional).
Specifications
Show with optional probe 6000-1018,
sold separately.
Inputs
Display Range
Probe Range
Accuracy (includes
meter and probe
combined)
Sensor Type
Resolution
Units
Output
Connectors
Measuring Interval
Battery
Dimensions
Weight
Calibration
P650/ P650EX / P655
P650: 1-RTD / P655 2-RTD
-328 to 1562°F / -200 to 850°C
-328 to 842°F / -200 to 450°C
±0.05°F from -148 to 302°F / ±0.03°C from -100 to 150°C
±0.09°F from -328 to 392°F / ±0.05°C from -200 to 200°C
0.1% rest of range
Precision 4-wire Pt100 RTD
0.01° to 200°, then 0.1°
°F / °C / Ohm
RS-232 interface included (software optional)
8-pole DN 45326
1 reading per second in standard mode, 4 per second in fast mode
9V battery, included; approx. 20 hours continuous use
8" x 3.4" x 1.5" /
200mm x 85mm x 40mm
1.1 lbs. / 500 g.
NIST-Traceable Certificate included
To Order
P650
P650-EX
P655
5090-0081
5090-0002
5090-0035
1490-P655
1-Channel, Precision Handheld Reference Thermometer, ±0.03°C system accuracy (probes sold separately)
$576
Intrinsically safe, P650, 1-Channel with EX-Mark: EEX ib IIb T4, Precision Handheld Reference
$1,395
Thermometer, ±0.03°C system accuracy (probes sold separately)
2-Channel, Precision Handheld Reference Thermometer, ±0.03°C system accuracy (probes sold separately)
$676
Graphical Interface Software for P600 Series and P795 meters
$180
(USB & RS-232 cable sold separately)
RS-232 Cable for P600 Series
$29
RS-232 to USB Adapter for P600 Series
$57
Rugged Instrument Carrying Case, fits P600 and P795 series meters, 2 probes up to 12", and cables
$199
Probes for P600 Series
Model
Description
High Precision Immersion Probe,
6000–1018
(includes calibration data)
High Precision Immersion Probe,
6000–1019
(includes calibration data)
High Precision Immersion Probe,
6000–1023C
(includes calibration data)
High Precision Immersion Probe,
6000–1023D
(includes calibration data)
6000–1023S
High Precision Lab Probe (includes
calibration data)
41 | Industrial Catalog
Size
1/8" dia. x 6"L
3.0mm x 150mm
1/8" dia. x 12"L
3.0mm x 300mm
1/16" dia. x 6"L
1.4mm x 150mm
1/32" dia. x 6"L
1.0mm x 150mm
1/32" dia. x 2"L
1.0mm x 50mm
Range
-328°F to 842°F
(-200°C to 450°C)
-328°F to 842°F
(-200°C to 450°C)
-328°F to 842°F
(-200°C to 450°C)
-328°F to 842°F
(-200°C to 450°C)
-328°F to 842°F
(-200°C to 450°C)
(cable to 150°C)
www.thermoworks.com
Price
$189
$219
$269
$349
$295
1-800-393-6434
CALIBRATION GEAR
P795 Precision Handheld
Reference Thermometer
±0.015°C Accuracy
• ±0.015°C system accuracy
• 2 Channels
• NIST-Traceable certificate provided
• Dual line display with differential function
• Probes include unique calibration code read
by meter
• Fast-mode displays 4 readings per second
• USB interface and software
• Resolution to 0.001°
Show with optional probe
6000-1773, sold separately.
The New P795 includes all the features of the P655
but with on-board data logging and system accuracy
to ±0.015°C. Take calibration-lab performance
into the field or use it on the test bench with full
confidence in its NIST-Traceable certificate. Research
or analytical lab procedures can be monitored with
resolution to 0.001°C. USB interface is included on
the meter. Add the optional PC software and cable
for high precision data acquisition of one or two
channels. Compares to bench-top meters costing
twice as much!
Specifications
2 / RTD
Yes-4,000 internal
-328 to 1562°F / -200 to 850°C
-328 to 842°F / -200 to 450°C
±0.03°F from -58 to 392°F
±0.015°C from -50 to 199.99°C
otherwise ±0.025%
Precision 4-wire Pt100 RTD
0.001° to 200°, then 0.01°
°F / °C / Ohm
32 to 104°F / 0 to 40°C
2-line LCD with log memory indicator
USB
8-pole DN 45326
1 reading per second in standard mode,
4 per second in fast mode
ABS plastic
9V Battery, included, approximately 20 hours
8.7" x 3.9" x 1.5" / 220mm x 98mm x 39mm
1.1 lbs. / 500 g.
NIST-Traceable Certificate included
Inputs
Data Logging
Display Range
Probe Range
Accuracy (includes
meter and probe
combined)
Sensor Type
Resolution
Units
Operating Temp.
Display
Output
Connectors
Measuring Interval
Rugged Case
1490-P655
Housing
Battery
Dimensions
Weight
Calibration
To Order
2-Channel with Data-Logging, Precision Handheld Reference Thermometer, ±0.015°C system accuracy
(probes sold separately)
5090-0081 Graphical Interface Software for P600 Series and P795 meters (USB & RS-232 cable sold separately)
5090-0046 USB Cable for P795
1490-P655 Rugged Instrument Carrying Case, fits P600 and P795 series meters, 2 probes up to 12", and cables
P795
$995
$180
$49
$199
Probes for P795 (calibration constants load automatically)
Model
6000–1773
6000–1774
6000–1784
Description
P795 High Precision Lab Probe,
(includes calibration data)
P795 High Precision Lab Probe,
(includes calibration data)
P795 High Precision Lab Probe,
(includes calibration data)
1-800-393-6434
Size
1/8" dia. x 6"L
3.0mm x 150mm
1/8" dia. x 12"L
3.0mm x 300mm
1/4" dia. x 12"L
6.0mm x 300mm
Range
-328°F to 842°F
(-200°C to 450°C)
-328°F to 842°F
(-200°C to 450°C)
-328°F to 842°F
(-200°C to 450°C)
www.thermoworks.com
Price
$259
$289
$329
Industrial Catalog | 42
CALIBRATION GEAR
USB Reference Probe, NIST-Traceable
±0.05°C Accuracy
• Range from -55 to 150°C (-67 to 302°F)
• Accuracy to ±0.05°C (±0.09°F)
• Plugs directly into USB Port
• Resolution to 0.01°
• Includes Windows software
• Receive email & text alerts
• Includes NIST-Traceable Certificate
Specifications
Range
Accuracy
Resolution
Probe
Cable Length
Power
Software
Calibration
For $250 you get a high precision thermometry
system with accuracy to ±0.05°C from 0 to 70°C
(±0.1°C to 100°C). You would pay $1,500 for a
conventional meter and probe with this accuracy that
logs data and includes a traceable certificate.
The USB Reference Probe is ideal for calibration labs
and instrument shops performing routine calibrations
in baths and dry block calibrators. Its 1/8" (3.2mm)
probe diameter means fast response and increased
flexibility in performing comparison calibrations.
Simply insert the probe into a stirred laboratory bath
or dry block along with your test thermometers and
compare readings over multiple temperatures.
-55 to 150°C / -67 to 302°F
±0.05°C (±0.09°F) from 0 to 70°C (32 to
158°F) ±1.5°C (±2.7°F) full range
0.01 °C
1/8" (3.2mm) diameter x 9" (229mm) length,
316 SST
6' (approx. 2m)
No battery, powered by USB port on PC
Windows 2000, XP, Vista 32-bit compatible
NIST-Traceable Calibration Certificate
included with test data at 0, 25, 70, and
100°C
If you’re still using mercury thermometers, now is the
best time to replace them with an easy-to-use digital
thermometer with super high precision. Plug the USB
probe into your PC, open the software and you’ve
got a digital reference thermometer without having
to squint or interpolate to get your readings. Connect
up to 10 probes within the same software window
and monitor multiple applications simultaneously
(depending on the availability of USB ports).
Each probe includes an individual NIST-Traceable
calibration certificate with test data at 0, 25, 70, and
100°C. The free software gives you the ability to store
data to the PC and setup hi and low alarm conditions
with email alerts.
Cal Lab Precision
Use in a dry-block calibrator or calibration bath to test temperature
probes by comparison.
To Order
USB Reference Thermometer,
±0.05°C, includes software and NISTTraceable calibration certificate
USB-EXT-10 USB Extension Cable, 10 feet (3m)
USB-REF
Software Included
Connect up to 10 probes, log to the PC, and get email alerts.
43 | Industrial Catalog
www.thermoworks.com
$249
$12
1-800-393-6434
CALIBRATION GEAR
Dry-Well Thermometer Calibrators
3001 Block Configuration
Calibrate at temperatures
3000 Series
3101 Cold Block
Portable and affordable these dry-well calibrators speedily check or
calibrate most thermometers and temperature probes. Set a temperature,
wait a few minutes for the block to get there, then insert your thermometer
and compare its reading to the calibrated dry-well display.
The 3000 Series heated units test temperatures up to 572°F. Choose from
a fixed block hole pattern to fit the probe diameters you use. Or, choose
the 3004 Dry-Well with a removeable insert that can be matched to the
probes you test.
The 3101 Dry-Well is cooled with solid-state modules for cold
temperatures as low as 14°F (-10°C) and up to 230°F. Check the ice point
without an ice bath! This unit features interchangeable block inserts for the
probe sizes of your choice.
All models include a NIST-Traceable certificate. These prices are a great
value for this level of precision and quality.
Specifications
3001/2/3/4 Series Hot Block
91.4°F to 572°F
(33°C to 300°C)
±0.5°C from 33 to 199.9°C
Range
Accuracy
Resolution
Stability
Heating
Time
Cooling
TIme
Stabilization
Well Depth
Hole
Configuration
(see
illustrations
at right)
Display
Power
Dimensions
Weight
Calibration
0.1°
±0.5°C
±0.5°C
Ambient to 572°F / 300°C after
Ambient to 212°F / 100°C after
10 minutes
10 minutes
572°F / 300°C to 212°F / 100°C
Ambient to 32°F / 0°C after 10
after 10 minutes
minutes
5 minutes
5 minutes
4" / 100mm
4" x 0.5" / 100mm x 12.7mm
3001: 5-hole, fixed
3002: 4-hole, fixed
3003: 2-hole, fixed
2-hole, brass insert
3004: 2-hole; 1 fixed,
1 brass insert
0.4" / 10mm 4-digit LED
0.4" / 10mm 4-digit LED
115 or 230 volts
2.25" (W) x 5" (H) x 6.25" (D)
3.5" (W) x 6" (H) x 7.3" (D)
57mm (W) x 125mm (H) x 158mm (D) 89mm (W) x 152mm (H) x 186mm(D)
2 lbs. / 900 g.
3.9 lbs. / 1,800 g.
NIST-Traceable Certificate included
To Order 271-331
271-332
271-333
271-334
271-431
271-321
271-322
271-323
271-324
271-325
3101 Cold Block
14°F to 230°F
-10°C to 110°C
±0.5°C from -10 to 99.9°C
Limited Time Price!
3001 Hot Block Dry-Well, 115VAC, °F
Was $1,095 $895
3002 Hot Block Dry-Well, 115VAC, °F
Was $1,095 $895
3003 Hot Block Dry-Well, 115VAC, °F
Was $1,095 $895
3004 Hot Block Dry-Well, 115VAC, °F, with 1/8" insert Was $1,195 $995
3101 Cold Block Dry-Well, 115VAC, °F,
Was $1,695 $1,395
with 1/8 & 3/16" inserts
Brass Insert for 3004 and 3101 - 1/8"
$79
Brass Insert for 3004 and 3101 - 1/8"
$79
Brass Insert for 3004 and 3101 - 1/8"
$79
Brass Insert for 3004 and 3101 - 1/8"
$79
Brass Insert for 3004 and 3101 - 1/8"
$79
1-800-393-6434
www.thermoworks.com
1/4" (6.35mm)
1/8" (3.3mm)
of your choice.
1/8" (3.3mm)
3001 Block Configuration
1/4" (6.35mm)
1/8" (3.3mm)
1/8" (3.3mm)
3001 Block Configuration
5/32" (4.0mm)
1/8" (3.3mm)
3/16"
(4.76mm)
1/4" (6.35mm)
1/8" (3.3mm)
5/32" (4.0mm)
3/16" (4.76mm)
3002
Block Configuration
5/32" (4.0mm)
3/16" (4.76mm)
3/8" (9.6mm)
3/16" (4.8mm)
3002 Block Configuration
3/8" (9.6mm)
3/16" (4.8mm)
3002 Block Configuration
1/8" (3.3mm)
3/16" (4.8mm)
1/4"(9.6mm)
(6.35mm)
3/8"
1/8" (3.3mm)
1/4" (6.35mm)
1/8" (3.3mm)
3003
Block Configuration
1/4" (6.35mm)
3003 Block Configuration
3/16"
(4.76mm)
1/2"
(12.7mm)
3/16"
(4.76mm)
1/2"
(12.7mm)
3/16"
(4.76mm)
1/2"
(12.7mm)
3003 Block Configuration
3004
3004Block
BlockConfiguration
Configuration
.51"
.51"
(13mm)
(13mm)
Removable
Removable
Insert
Insert
1/8"
1/8"
(3.3mm)
(3.3mm)
3101
3101Block
BlockConfiguration
Configuration
1/8"
1/8"
(3.3mm)
(3.3mm)
Removable
Removable
Insert
Insert
3/16"
3/16"
(4.8mm)
(4.8mm)
Removable
Removable
Insert
Insert
Removable
RemovableBrass
BrassInserts
Inserts
for
for3004
3004&&3101
3101
271-321
271-321
271-322
271-322
1/8"
1/8"
(3.3mm)
(3.3mm)
5/32"
5/32"
(4.1mm)
(4.1mm)
271-323
271-323
3/16"
3/16"
(4.8mm)
(4.8mm)
271-324
271-324
271-325
271-325
1/4"
1/4"
(6.4mm)
(6.4mm)
3/8"
3/8"
(9.6mm)
(9.6mm)
Industrial Catalog | 44
CALIBRATION GEAR
9140 Series Field Metrology Wells
• Lightweight, portable, and fast.
• Cool to –25°C in 15 minutes and
heat to 660°C in 15 minutes
• Built-in two-channel readout for
PRT, RTD, thermocouple,
4-20 mA current
• True reference thermometry
with accuracy to ±0.01°C
• On-board automation and
documentation
• Metrology performance in
accuracy, stability, uniformity,
and loading
The 9140 Series Field Metrology Wells provide
calibration lab performance in a field or industrial
environment. These units are at-home on a lab bench
or in the plant. Portability, speed, precision and
functionality are maximized.
Designed and manufactured by Fluke, Hart Scientific
Division (about a 1/2 mile from ThermoWorks) these
instruments are lightweight, compact and quick to
reach temperature set points. They offer the best in
stability, uniformity and traceable accuracy.
Optional built-in Process Electronics can read
thermocouples,RTD’s and 4-20mA process loops. A
reference probe can be added to improve the on-board
reference thermometer function to ±0.01°C. Three
models offer ranges starting at -25°C and reaching
660°C. On-board documentation and automation
features are included.
We know temperature calibration pretty well and we
carry these dry-wells because they’re the best in
their class. NIST-Traceable calibration certificates are
included.
Base Unit Specifications
9142
Range
Accuracy
Stability
-13 to 302°F / -25 to 150°C
±0.2°C Full range
±0.01°C Full Range
Well Depth
9143
91 to 662°F
33 to 350°C
±0.2°C Full Range
±0.02°C at 33°C
±0.02°C at 200°C
±0.03°C at 350°C
5.9". / 150mm
9144
122 to 1220°F
50 to 660°C
±0.35°C at 50°C
±0.35°C at 420°C
±0.5°C at 660°C
±0.03°C at 50°C
±0.05°C at 420°C
±0.05°C at 660°C
16 min: 23 to 140°C
23 min: 23 to 150°C
5 min: 33 to 350°C 15 min: 50 to 660°C
Heating Time
25 min: –25 to 150°C
15 min: 23 to –25°C
32 min: 350 to 33°C 35 min: 660 to 50°C
Cooling Time
25 min: 150 to –23°C
14 min: 350 to 100°C 25 min: 660 to 100°C
11.4" (H) x 7.3" (W) x 11.6" (D) / 290mm (H) x 185mm (W) x 295mm (D)
Dimensions
18 lbs. / 8.16 kg.
16 lbs. / 7.3 kg.
17 lbs. / 7.7 kg.
Weight
100 V to 115 V (±10%)
50/60 Hz, 635 W
100 V to 115 V (±10%), 50/60 Hz, 1400 W
Power
230 V (±10%)
230 V (±10%), 50/60 Hz, 1800 W
50/60 Hz, 575 W
Computer
RS-232 and 9930 Interface-it control software included
Interface
To Order
Field Metrology Well 9142 and one insert, -25 to 150ºC
Field Metrology Well 9142 and one insert, -25 to 150ºC,
9142-X*-P
with Process Electronics
Field Metrology Well 9143 and one insert, 33 to 350ºC
9143-X*
Field Metrology Well 9142 and one insert, 33 to 350ºC,
9143-X*-P
with Process Electronics
Field Metrology Well 9144 and one insert, 50 to 660ºC,
9144-X*
Field Metrology Well 9144 and one insert, 50 to 660ºC,
9144-X*-P
with Process Electronics
9142-INSX* Optional Inserts for 9142
9143-INSX* Optional Inserts for 9143
9144-INSX* Optional Inserts for 9144
9142-X*
$4,975
9142 Inserts
1/4"
$5,145
$4,695
1/4"
A
3/8"
1/4"
3/16" 1/8"
3/16"
1/4"
A
3/8"
1/8"
1/4"
1/4"
1/8"
B
3/8"
1/4"
3/16" 3/16"
1/4"
3/16"
B
3/8"
3/16"
3/8"
1/4"
1/4"
C
1/4"
1/4"
1/4"
1/4"
4mm 3mm
D
6mm
1/4"
C
1/4"
1/4"
1/4"
1/4"
6mm
3mm 4mm
4mm
1/4"
10mm
E
4mm
$6,225
$3,890
9143 / 9144
Inserts
3mm
8mm
D
3mm
6mm
3mm
4mm
3mm
1/4"
6mm
F
4mm
1/4"
4mm 3mm
6mm
6mm
10mm
E
4mm
8mm
6mm
$5,950
$305
$435
$450
3mm
6mm
4mm
F
4mm
1/4"
3mm
* X Designates choice of insert
45 | Industrial Catalog
www.thermoworks.com
1-800-393-6434
SIMULATORS
MicroCal Thermocouple Simulator
• Check thermometers, controls, transmitters, etc…
• Easy-to-set with easy-to-read digital display
• Store 12 preset temperatures of your choice
• Resolution to 0.1°, Accuracy to ±0.2°C
Instantly test any brand
of thermocouple meter.
Specifications
Check the accuracy of your instrument against this
traceable thermocouple simulator. Simply plug the
MicroCal 2 into your thermocouple meter and select
a temperature.
Save up to 12 of your most frequently used
temperatures, set new ones anytime. The LCD
provides 0.1° resolution up to 1999.9 with 1° above
that. A simple mode button adjusts user settings.
Auto-off preserves battery life and can be disabled.
The Microcal 2 is available in thermocouple
types K, T and J, and comes with the appropriate
thermocouple cable fitted with mini-plugs. A
certificate of calibration is provided.
VA710 Thermocouple Simulator
VA720 RTD Simulator
Range
Accuracy
Ambient Temp.
Battery
Sensor Types
Dimensions
Calibration
K: -328 to 2501°F / -200 to 1372°C
T: -454 to 752°F / -270 to 400°C
J: -328 to 2192°F / -200 to 1200°C
±0.4°F / 0.2°C, ±1 digit
0 to 50°C
2 x AAA, 300 hours
Type K, T, or J thermocouple
2.87" (W) x 5.5" (H) x 1.38" (D)
73mm (W) x 140mm(H) 35mm (D)
NIST-Traceable Certificate included
To Order
Microcal 2K Thermocouple Simulator
Microcal 2T Thermocouple Simulator
Microcal 2J Thermocouple Simulator
Protective PVC Boot
271-200
271-202
271-201
830-205
$349
$349
$349
$12
Available July 2010
VA710—
• Measure and simulate 8 different
thermocouple types
• Measures and outputs mV
• Very simple operation
• Large digit display
VA720—
• Measure and simulate 7 different RTD types
• Select 2-, 3-, or 4-wire measurement mode
• Accuracy to ±0.1 Ohms, ±0.2°C
• Large digit display
VA710
Thermocouple Simulator
VA720
RTD Simulator
Check or calibrate any thermocouple or RTD
instrument. Competing calibrators typically cost 2 or
3 times more.
Use the VA710 to calibrate thermocouple meters
with 8 different thermocouple types plus mVs.
Simply plug-in to your instrument, dial in the desired
temperature and compare. It’s that easy.
For testing RTD instruments, choose our VA720.
Simulate and measure 7 different RTD types in
2-wire, 3-wire, or 4-wire mode. Large singlefunction buttons and a big digit display make these
tools instrument shop favorites.
1-800-393-6434
Specifications
VA710
VA720
Pt10, Pt50, Pt100,
Measurement Thermocouple type
Pt200, Pt500,
J, K, T, E, R, S, B, N
Type
Pt1000, Pt100 JIS
-10 to 75mV
0.00 to 3200Ω
Range
Type K: ±0.3°C+10µV Pt100(4W):±0.3°C
Accuracy
(Input/Output) Type T: ±0.3°C+10µV Pt1000(4W): ±0.2°C
0.01mV or 0.1° max 0.01Ω or 0.1°C max
Resolution
6 x AAA
Battery
8.1" (H) x 3.9" (W) x 1.8" (D)
Size
205mm (H) x 98mm (W) x 46mm (D)
16.6 oz. / 472 g.
Weight
See web site for complete specifications and accessories.
To Order
VA710
VA720
www.thermoworks.com
Thermocouple Simulator
RTD Simulator
$349
$379
Industrial Catalog | 46
CALIBRATION GEAR
IR500
Infrared Temperature Calibrator (Blackbody)
Check the performance of infrared guns quickly
and easily with our new IR-500. Set the display to
the desired temperature, then point your infrared
thermometer at the target, shoot and record. It’s that
easy.
The isothermal 2.25 inch black body target is
manufactured to approximate an emissivity of
0.95, which is ideal for most industrial infrared
thermometers. For increased accuracy, insert a 1/8"
diameter reference probe into the reference well at
the top of the target and use an external reference
thermometer as the standard.
• Check/Certify IR thermometers to 932°F
(500°C)
• Large 2.25 inch (57mm) diameter black body
target
• Includes 1/8" (3.2mm) diameter well for a
precision reference RTD thermometer
Specifications
Range
Each IR-500 includes a NIST-Traceable calibration
certificate issued from our own calibration lab. We
also include the test data at 122°F and 212°F (50°C
and 100°C). An optional 5-point calibration is also
available to 752°F (400°C).
The IR-500 provides a stable blackbody source for
certifying all types of infrared thermometers.
Accuracy
Stability
Target Size
Target Emissivity
Resolution
Heating Time
Cooling Time
Power
Size
Weight
Calibration
To Order
Go to www.thermoworks.com for more infrared calibration tools
for temperatures from -15°C to 700°C with accuracies to ±0.35°C.
47 | Industrial Catalog
122 to 932°F / 50 to 500°C)
±1.0°F at 212°F (±0.5°C at 100°C)
±3.6°F at 932°F (±1.8°C at 500°C)
±0.2°F at 212°F (±0.1°C at 100°C)
±0.6°F at 932°F (±0.3°C at 500°C)
2.25" (57mm)
0.95
0.1°C/°F
40 minutes to max.
45 minutes max. to 212°F (100°C)
110V AC, 3A or 230V AC (±10%), 1.5A
4.49" (W) x 7.08" (H) x 9.17" (D) i
114mm (W) x 180mm (H) x 233mm (D)
5.9 lbs. (2.682 kg.)
Includes 2-point NIST-Traceable
Certificate at 122 & 212°F (50 & 100°C)
Limited Time Price!
Portable Infrared Calibrator,
932°F, includes 2-point
IR-500-110 NIST-Traceable certificate of
calibration (122 & 212°F / 50 &
100°C—110VAC
Portable Infrared Calibrator,
932°F, includes 2-point
IR-500-220 NIST-Traceable certificate of
calibration (122 & 212°F / 50 &
100°C—220VAC
Optional 5-point NISTTraceable certificate of
CAL-IR500 calibration (122, 212, 392,
572, 752°F / 50, 100, 200,
300, 400 °C
Optional rugged carrying case
P-1450
www.thermoworks.com
Was: $1,195
Now: $795
Was: $1,195
Now: $795
$90
$88
1-800-393-6434
CALIBRATION GEAR
Infrared Comparator Cup
• Portable and easy to use
• No external power required
• Quick test at room temperature
• Use to test all types of IR thermometers
The Infrared Comparator Cup provides a stable
black body temperature. The comparator cup is
an inexpensive way of checking infrared handheld thermometers against a known reference
thermometer.
The comparator consists of an aluminum cup with
a solid matte black base, the base incorporates a
3.5mm (1/8") reference thermometer hole for probe
insertion.
The comparator can be used at any temperature
within the ambient range of the instrument to
be tested. The information from the reference
thermometer can be used to compare readings
against the test instrument. Then only instruments
with unacceptable errors need to be returned to the
supplier for re-calibration or certification.
To Order
Shown with 222-505 Reference Thermometer and IR Gun, sold separately.
Mini Calibration Bath
814-132 Infrared Comparator Cup
222-505 Reference Thermometer °F, NIST-Traceable
222-005 Reference Thermometer °C, NIST-Traceable
$69
$279
$279
• Simple, low-cost method to test thermometers
• Use with a traceable reference thermometer
• Test probes at 32°F and 130°F
Using a solid-state peltier heat-pump, the Mini
Calibration Bath quickly cools to about 71°F below
ambient (near 32°F) and heats to approximately
130°F. Immerse your thermometer and compare
its reading to a traceable reference thermometer.
Operation is easy. One button for Hot, one for Cold.
Fill its reservoir with crushed ice and a little water,
turn the Cold button on, and in a few moments you’ll
have an ice-bath ready for calibrations at a perfect
32.0°F. Our tests show the bath will maintain the ice
point at 32.0°F with a stability of at least ±0.3°F
for over four hours. For hot temperatures, the bath
will continue heating until it reaches approximately
130°F.
Specifications
Range
Accuracy
Power
Power Consumption
Bath/Cup Capacity
32°F (71 below ambient) and 130°F
(0 and 55°C)
±0.5°C in a stable ambient temp
Included AC adaptor
Cooling: 20W / Heating: 18W
300ml
To Order
Shown with 222-505 Reference Thermometer and others, sold separately.
1-800-393-6434
822-950 Mini Temperature Calibraton Bath
Reference Thermometer °F, NIST222-505
Traceable (see page 40)
Reference Thermometer °C, NIST222-005
Traceable (see page 40)
www.thermoworks.com
$59
$279
$279
Industrial Catalog | 48
TEMPERATURE BATHS
8000 Series Compact Heated
Baths/Circulators
9100 Series Chilled Calibration
Baths/Circulators
912
812
8006
8002
9112
9102
9106
8012
• Range from 86 to 392°F / 30 to 200°C
• Stability to ±0.01°C
(depends on controller selected)
• Very small footprint, low profile
• 6 liter fluid capacity
• Choice of 4 controllers
• Range from -4 to 392°F / -20 to 200°C
• Stability to ±0.01°C
(depends on controller selected)
• Small upright design
(less than 1 sq. ft. footprint)
• 6 liter capacity
• Choice of 4 controllers for same base unit
Designed and manufactured in the U.S.A., these temperature baths offer top value for an affordable price. The
performance, quality and long-term reliability exceed most of the competition. Widely chosen for temperature
calibration and general purpose lab or research applications, these units can be used as self-contained baths or
circulators for control of external equipment. We’ve shown a selection of our 6-liter models but larger volumes and
other temperature ranges are offered at thermoworks.com. All are available with a range of controller options to fit
your budget and performance needs.
Basic Analog Control, ±0.2°C stability - Most affordable option provides dial setpoints.
Standard Digital Control, ±0.05°C stability - Economical digital control setpoints.
Advanced Digital Control, ±0.01°C stability - Top performance includes 0.01°C settability.
Programmable Digital Control, ±0.01°C stability - Same as the Advanced Model but includes time and temperature programing.
Specifications
8012
Range
8002
86°F to 392°F
30°C to 200°C
8006
812
86°F to 302°F
30°C to 150°C
86°F to 212°F
30°C to 100°C
9112
9102
4°F to 392°F
–20°C to 200°C
9106
912
4°F to 302°F
4°F to 212°F
-20°C to 150°C -20°C to 100°C
6 liters
6 liters
Reservoir
N/A
+20°C 200 Watts / 0°C 140 Watts / -10°C 100 Watts
Cooling
±0.01°C
±0.05°C
±0.2°C
±0.01°C
±0.05°C
±0.2°C
Stability
Programmable
Programmable
Digital
Standard
Analog
Digital
Standard
Analog
Controller
RS232
N/A
RS232
N/A
Computer I/O
LCD, °F
LCD, °F
Thermometer
Thermometer
Graphic LCD, °F or °C
Graphic LCD, °F or °C
Readout
(supplied)
(supplied)
or °C
or °C
Readout
±0.25°C
±0.5°C
N/A
±0.25°C
±0.5°C
N/A
Accuracy
60Hz: 1100 watts
60Hz: 1100 watts
60Hz: 1100 watts
60Hz: 1100 watts
Heater
50Hz: 2200 watts
50Hz: 1600 watts
50Hz: 2200 watts
50Hz: 1600 watts
5.25 L x 5.25 W x 5.5 D in
5.25 L x 5.25 W x 5.5 D in
Working
13.3 L x 13.3 W x 14 D cm
13.3 L x 13.3 W x 14 D cm
Access
14.75 L x 8.25 W x 14 D in (37.5 L x 21 W x 35.6 cm)
14.75 L x 8.25 W x 14 D in (37.5 L x 21 W x 35.6 cm
Dimensions
29 lbs / 13.3 kg
23 lbs / 10.5 kg
70 lbs / 32 kg
64 lbs / 29 kg
Ship Weight
1/4 in FPT Rear Discharge
1/4 in FPT Rear Discharge
Inlet & Outlet
To Order
8102 Temperature Bath,
8012A11B
Programmable Controller, 110V*
8002 Temperature Bath,
8002A11B
Digital Controller, 110V*
8006 Temperature Bath,
8006A11B
Standard Controller, 110V*
812 Temperature Bath,
80AOA11B
Analog Controller, 110V*
To Order
$2,947
$2,298
$1,635
$1,275
9112 Temperature Bath,
Programmable Controller, 110V*
9102 Temperature Bath,
9102A11B
Digital Controller, 110V*
9106 Temperature Bath,
9106A11B
Standard Controller, 110V*
912 Temperature Bath,
91AOA11B
Analog Controller, 110V*
9112A11B
$3,851
$3,122
$2,459
$2,238
*220V models available - Call for pricing
49 | Industrial Catalog
www.thermoworks.com
1-800-393-6434
CALIBRATION SERVICES
Capabilities
• Handheld meters and probes
• Infrared thermometers/guns
• Data loggers
• Humidity meters
• Panel meters & controllers
• Dial thermometers
Unlike most suppliers of industrial thermometers,
ThermoWorks has a fully operational calibration
laboratory that offers NIST-Traceable certificates.
Standards are kept for Infrared and contact
thermometry and are regularly sent to primary
temperature labs to maintain NIST-Traceability.
In our blackbody calibration lab, we use six different
Blackbody Targets from internationally recognized
metrology suppliers. We can check IR accuracy from
-30 to 700°C and offer NIST-Traceable calibration
certificates.
Our metrology lab employs calibration baths
with stabilities to ±0.001°C for accurate probe
calibrations. Our Hart Scientific metrology standard
has a published accuracy to ±0.005°C. We know
you are serious about your work. So are we.
Humidity calibrations are performed in a twopressure humidity generator from Thunder Scientific
with accuracy to ±0.5% RH.
NIST-Traceable
Infrared Calibrations
NIST-Traceable
Probe & Meter Calibrations
• Infrared calibrations from -22 to 1292°F
(-30 to 700°C)
• Single and multi-point certificates
• Certificates offered with new purchases or
recalibration services
• 6 different blackbody targets from multiple
vendors
• Offered for any IR manufacturer
• Probe calibrations from -112 to 2192°F
(-80 to 1200°C)
• Meter calibrations from -256 to 2300°F
(-160 to 1260°C)
• System calibrations offered
• NIST-Traceable humidity calibrations
• Data logger calibrations
To Order: Infrared NIST-Traceable Certificates
CAL-IR3
CAL-IRFS
CAL-IR5L
CAL-IR5M
CAL-IR5H
NIST IR Cal Service, 3-pt Infrared, (0°C,
100°C, 250°C)
NIST IR Cal Service, 3-pt Infrared Food
Service, (0°C, 60°C, 100°C)
NIST IR Cal Service, 5-pt Infrared lowtemp, (0°C, 50°C, 100°C, 200°C, 300°C)
NIST IR Cal Service, 5-pt Infrared Hightemp, (0°C, 100°C, 200°C, 300°C, 500°C)
NIST IR Cal Service, 5-pt Infrared Hightemp, (0°C, 100°C, 250°C, 500°C, 700°C)
1-800-393-6434
$35
$35
$55
$65
$75
Ask your current instrument supplier for a NISTTraceable certificate and you’ll see why so many are
switching to the experts at ThermoWorks.
To Order: NIST-Traceable Certificates
NIST Cal Service, 1-pt Probe/Meter
NIST Cal Service, 2-pt Probe/Meter
NIST Cal Service, 3-pt Probe/Meter
NIST Cal Service, 4-pt Probe/Meter
NIST Cal Service, 5-pt Probe/Meter
NIST RH Cal Service, 40% RH,
CAL-RH1PT
1-pt temp
NIST RH Cal Service, 30%, 60% RH,
CAL-RH2PT
1-pt temp
CAL-1PT
CAL-2PT
CAL-3PT
CAL-4PT
CAL-5PT
www.thermoworks.com
$35
$45
$60
$75
$90
$35
$65
Industrial Catalog | 50
Presorted STD
US Postage Paid
Orem, UT
Permit 380
www.thermoworks.com
801-756-8948
800-393-6434 or 801-756-7705
1762 W. 20 S., #100
Lindon, UT 84042
New Splash-Proof Thermapen
High speed thermocouple offers traceable accuracy better than ±0.4°C and reads
a full temperature in only 3 seconds! Great for the lab or the plant floor!
Order online or by phone
ane, Andy,
, Terral, Di
L to R: Tom
n
Aman
vin, Dalle
da, Lisa, Ke
New War
ehouse/T
ech Faci
lity in Lind
on, Utah
Already a leader in food service and processing, ThermoWorks is growing quickly as a major supplier to
industrial and scientific markets. Our unique and innovative products make your budget go farther.
Call us now for technical advice or to place an order. 95% of all orders ship the same day.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising