ZTE R880H User manual

Telecom R880H Overview LED Status

Red Less than 90% charge

Green

LED

Flashing

More than 90% charge

Message or Missed Call

Notification

1

Key Functions

Key Function

Power Key

Back

Home

Options

Press to wake up your phone

Press and hold to select Silent, Vibrate or Airplane mode, to Reboot your device or power on & off

Press to switch your phone to Sleep mode.

Touch to return to the previous screen

Touch to exit applications

Touch to go to the Home Screen

Touch for current Options menu

Press and hold to view recent apps

Apps

View all your system apps

Volume Keys Press or hold to turn the volume up or down.

2

Insert the SIM Card and microSD Card*

1. Open the back cover using the thumb catch on the base of the handset.

2. Locate the SIM slot as shown.

3. Hold the SIM card with the gold contacts facing down and the cut corner facing the bottom of the phone and push it fully into the slot.

3. To increase the memory capacity insert a microSD card (*optional) up to 32GB as shown.

Push it fully into the slot.

4. The microSD card is an optional accessory and is not included in the box.

3

Charging the Battery

Insert the charger lead carefully.

Ensure that the plug is inserted with the correct orientation.

Do not force the connector into the charger jack.

Connect the charger to a standard AC wall outlet.

Disconnect the charger when the battery is fully charged.

Be careful not to pull on or trip over the lead whilst the handset is plugged in.

How much charge have you got?

If the battery is low, there will be a pop-up message on the screen. As you charge your phone, the lock screen will tell you the battery level each time you wake up your phone.

If the phone is on, you’ll see the charging icon / on the status bar.

4

Powering On/Off



Press and hold the Power Key to turn on your phone.



To turn it off, press and hold the Power Key to open the options menu. Touch Power off and then touch OK.

Setting Up for the First Time

When you first power on your phone or after a factory reset enter some settings before use.

1. Touch the language field to select the language you want to use and then touch Start.

2. Select Wi-Fi, or touch Skip.

3. If you use Gmail, touch Yes.

4. Touch No to create a new Google account. You can also touch Not now to set up an account later.

5. Configure the Google location options and touch .

6. Enter your name which the phone uses to personalize some apps and touch .

7. You will be prompted to accept the terms of Google service. Touch to continue.

8. Touch Finish to complete the setup.

Further assistance is given in the form of pop ups. Press OK to clear these notices.

5

The Home Screen

Status &

Notifications

Drag the notifications bar down to review

Apps

People

Phone

6

Google Search

Clock, press to set Alarms

Wallpaper, press and hold to personalise

Messaging

Chrome

Phone Icons

Signal strength

Mobile data in use

New SMS / New MMS

New Email

New Gmail message

Battery flat

Battery low

Battery partially drained

Battery full

/ Battery charging

USB tethering is on

No signal

Flight mode

Bluetooth on

Connected to a Wi-Fi network

Alarm set

Portable Wi-Fi hotspot

Ringer off

Muted (microphone off)

Vibrate mode

Speaker on

7

Quick Settings Panel

Swipe down from the top of the screen and press the

Quick Settings button to open the panel.

You can quickly switch device features on and off.

Blue is enabled, grey is off.

Press the Settings button to open Settings

Access the full user guide on your device

The full user guide is available in your device.

Go to Apps > User Manual or download a copy from zte.co.nz

8