OUTDOOR & INDOOR FROST-FREE

REFRIGERATORS and FREEZERS

MODEL NOS.

Refrigerators: FF1532B / SPR316OS / FF64B

FF64BSS / SPR627OS

Freezers: SCFF1533B / SCFF52W / SCFF53B

SCFF53BSS / SPFF51OS

INSTRUCTION MANUAL

Write Model and Serial Nos. (on lower left corner of inside cabinet) here:

BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.

Model No.: _______________________

Serial No.: _______________________

Felix Storch, Inc.

770 Garrison Avenue

Bronx, NY 10474 www.summitappliance.com

TABLE OF CONTENTS

Appliance Safety

Important Safeguards

Location of Parts

Installation Instructions

Before Using Your Appliance

Installation of Your Appliance

Electrical Connection

Extension Cord

Reversing the Door Swing of Your Appliance

Installing the Stainless Steel Handle

Operating Your Appliance

Control Panel for FF1532B/SPR316OS/FF64B/FF64BSS/SPR627OS

Control Panel for SCFF1533B/SCFF52W/SCFF52B/SCFF53BSS/SPFF51OS

Sabbath Mode

Temperature Memory Function

Defrosting

Using the Freezer SCFF1533B/SCFF52W/SCFF52B/SCFF53BSS/SPFF51OS

Temperature Alarm / Door Alarm

Door Lock

Shelves

Care and Maintenance

Cleaning Your Appliance

Power Failure

Vacation Time

Moving Your Appliance

Energy Saving Tips

Troubleshooting

Limited Warranty

13

13

13

13

9

9-12

9-10

10-11

11

11

11-12

12

12

12

12

13

7

7

7-8

8

8

3

3-4

5-6

7-9

13

14-15

16

2

APPLIANCE SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the Safety Alert Symbol. The symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the Safety

Alert Symbol and either the word DANGER or WARNING.

DANGER means that failure to heed this safety statement may result in severe personal injury or death.

WARNING means that failure to heed this safety statement may result in extensive product damage, serious personal injury, or death.

All safety messages will alert you about the potential hazard, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.

IMPORTANT SAFEGUARDS

Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precautions, including the following:

• Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an extension cord.

• Replace all panels before operating.

• It is recommended that a separate circuit serving only your appliance be provided. Use receptacles that cannot be turned off by a switch or pull chain.

• Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion.

And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

• Do not connect or disconnect the electric plug when your hands are wet.

• Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in electrical shock or death.

• Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

• This appliance is CFC- and HFC-free and contains small quantities of Isobutane (R600a) which is environmentally friendly, but flammable. It does not damage the ozone layer, nor does it increase the greenhouse effect. Care must be taken during transportation and setting up of the appliance that no parts of the cooling system are damaged. Leaking coolant can ignite and may damage the eyes.

• In the event of any damage:

3

- Avoid open flames and anything which creates a spark,

- Disconnect from the power supply,

- Air the room in which the appliance is located for several minutes and

- Contact the Service Department for advice.

• The more coolant there is in an appliance, the larger the room it should be installed in. In the event of a leakage, if the appliance is in a small room, there is the danger of combustible gases building up.

For every ounce of coolant at least 325 cubic feet of room space is required. The amount of coolant in the appliance is stated on the data plate inside the appliance. It is hazardous for anyone other than an Authorized Service Person to carry out servicing or repairs to this appliance.

• Take serious care when handling, moving and using the appliance to avoid either damaging the refrigerant tubing or increasing the risk of a leak.

• Replacing component parts and servicing shall be done by factory authorized service personnel, so as to minimize the risk of possible ignition due to incorrect parts or improper service.

FOLLOW WARNING CALLOUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL

• Use two or more people to move and install appliance. Failure to do so can result in back or other injury.

• To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed.

Choose a well-ventilated area with temperatures above 44°F (7°C) and below 90°F (32°C).

• The appliance should not be located next to ovens, grills or other sources of high heat.

• The appliance must be installed with all electrical, water and drain connections in accordance with state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance with the National Electrical Code and local codes and ordinances, is required.

• Do not kink or pinch the power supply cord of the appliance.

• The size of the fuse (or circuit breaker) should be 15 amperes.

• It is important that the appliance be leveled in order to work properly. You may need to make several adjustments to level it.

• All installations must be in accordance with local plumbing code requirements.

• Make certain that the pipes are not pinched, kinked or damaged during installation.

• Check for leaks after connection.

• Never allow children to operate, play with or crawl inside the appliance.

• Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage or discolor the interior.

• Use this appliance only for its intended purpose as described in this Instruction Manual .

• Keep fingers out of the “pinch point” areas. Clearances between the door and cabinet are necessarily small. Be careful closing the door when children are in the area.

Risk of child entrapment!

Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous, even if they will “just sit for a few days”.

Before discarding your old refrigerator:

Take off the doors

Leave the shelves in place so that children may not easily climb inside.

- SAVE THESE INSTRUCTIONS -

4

LOCATION OF PARTS

MODEL SPR627OS

–

OUTDOOR REFRIGERATOR

MODELS FF64B / FF64BSS – FROST-FREE REFRIGERATORS

Digital Control Panel Stainless Steel Door

LED Light

Stainless Steel Handle

Shelves (3)

Bottom Grille

Adjustable Legs Security Lock

MODEL SPFF51OS – OUTDOOR FREEZER

MODELS SCFF52W / SCFF53B / SCFF53BSS – FROST-FREE FREEZERS

LED Light Door

Shelves (3)

Handle

Bottom Grille

Adjustable Legs

Security Lock

Digital Control Panel

5

MODEL SPR316OS – OUTDOOR REFRIGERATOR

MODEL FF1532B

–

FROST-FREE REFRIGERATOR

Door

(Only for FF1532B)

MODEL SCFF1533B

–

FROST-FREE FREEZER

LED Light

Shelves (3)

Door

Handle

Bottom Grille

Security Lock

Adjustable Legs Digital Control Panel

NOTE: Models designated for outdoor use (find “OS” in suffix of model number) have a reinforced exterior and heavy-duty cord to help withstand the elements.

6

INSTALLATION INSTRUCTIONS

BEFORE USING YOUR APPLIANCE

Remove the exterior and interior packing.

Before connecting the appliance to the power source, let it stand upright for approximately 2 hours.

This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

Clean the interior surface with lukewarm water using a soft cloth.

Install the handle on the door, if it is not already attached. (See page 9.)

INSTALLATION OF YOUR APPLIANCE

The appliance is designed for built-in or recessed or free standing installation for indoor use for models

FF1532B, FF64B, FF64BSS, SCFF1533B, SCFF52W, SCFF53B and SCFF53BSS, and outdoor use for SPR316OS, SPR627OS and SPFF51OS.

CAUTION : This appliance is not designed for the storage of medicine or other medical products.

Place your appliance on a floor that is strong enough to support it when it is fully loaded. To level the unit, adjust the front leveling legs.

For free standing installation, 5 ” (127mm) of space between the back and sides of the unit, and 4”

(102mm) at the top, are suggested, which allows the proper air circulation to cool the compressor and condenser. Even for builtin installation, it is a must to keep ¼” (6.35mm) space on each side and at the top and 2” (51mm) at the rear. Take care that the air vent at the front of the appliance is never covered or blocked in any way.

NOTE: It is recommended that you do not install the appliance near an oven, radiator or other heating source. Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Don’t install in a location where the temperature will fall below 44°F (7°C). For best performance, do not install the appliance behind a cabinet door or block the base grille.

Avoid locating the unit in moist areas.

Plug the appliance into an exclusive, properly grounded wall outlet.

ELECTRICAL CONNECTION

WARNING

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by a qualified electrician or an authorized service center.

This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which mates with standard three-prong wall outlets to minimize the possibility of electrical shock.

Do not under any circumstances cut or remove the third (ground) prong from the power cord supplied. For personal safety, this appliance must be properly grounded. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized service center.

This appliance requires a standard 115/120 Volt AC ~ 60Hz three-prong grounded electrical outlet. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

To prevent accidental injury, the cord should be secured behind the appliance and not left exposed or dangling.

7

The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevents overloading house wiring circuits that could cause a fire hazard from overheating. Never unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the appliance, be careful not to damage the power cord.

EXTENSION CORD

Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord, it is absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.

REVERSING THE DOOR SWING OF YOUR APPLIANCE

This unit has the capability of the door opening from either the left or right side. The unit is delivered to you with the door opening from the left side. Should you desire to reverse the opening direction, please follow the reversal instructions shown below.

NOTE: All parts removed must be saved to allow the door swing to be reversed.

1. Remove the bottom hinge (2) by unscrewing the four lock screws (1). Be careful to hold the door firmly after removing the screws. (Fig. 1)

2. Gently pull down to remove the door from the right top hinge and place it on a padded surface to avoid the risk of damage. Then remove the right top hinge (7). (Figs. 2 & 3)

3. Unscrew and transfer pins (4) and(3) of the hinge plate to the opposite side. (Fig. 1)

4. Pop out the cover caps on the left side of cabinet and use them to cover the screw holes on the right hand side.

5. Screw the alternative left top hinge (8), included in the fittings, on the left hand side of cabinet. (Fig. 3)

6. Relocate the door to the designated position. Then screw the bottom hinge assembly on the left designated position and tighten it after the door is leveled. (Fig. 1)

7. Remove the handle from the left side of the door and install it on the right side. ( See next section .)

8

INSTALLING THE STAINLESS STEEL HANDLE

This appliance includes a stainless steel handle that is not required to operate the unit. To install the handle, follow the instructions below:

1. Use a screwdriver to remove the screws on the side of door where the handle is to be installed.

2. Align the handle with the screws removed in step # 1. Tighten the screws using a Phillips head screwdriver until the handle is both flush and secured tightly against the door side. (DO NOT overtighten as this will cause damage to the stainless steel door surface.)

Handle

Screw

Door

OPERATING YOUR APPLIANCE

It is recommended you install the appliance in a place where the ambient temperature is between 44º and

90ºF (7º to 32ºC). If the ambient temperature is above or below the recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate. The operating temperature range may not be reached.

CONTROL PANEL for FF1532B / SPR316OS / FF64B / FF64BSS / SPR627OS

ON/OFF Power

To turn the appliance off, press and hold the key for 5 seconds until the temperature display goes off. To turn the appliance on, press and hold the key for 1 second until the temperature display lights up.

NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.

LIGHT

To control the inner light.

UP

Used to increase (warm) the set temperature by 1°C/1ºF.

DOWN

Used to decrease (cool) the set temperature by 1°C/1ºF.

ºF/ºCSelector

Select the temperature display in Fahrenheit or Celsius degrees. To change the temperature from

Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHT key for 5 seconds.

9

Setting the Temperature Control

• You can set the temperature by touching the UP and DOWN symbols. When you push either of the two buttons for the first time, the LED readout will show the original temperature set previously. (The temperature preset at the factory is 38°F, or 3°C.)

• The temperature you are setting will increase by one degree each time you touch the UP symbol, and will decrease by one degree each time you touch the DOWN symbol.

• The range of the temperature control is from 36°F to 43°F.

• To view the set temperature at any time, touch the UP or DOWN symbol. The set temperature will flash in the display window for 5 seconds. After 5 seconds, the temperature inside the unit will reappear in the display window.

Interior Light

The interior light makes it easy to view your items. Touching the LIGHTsymbol toggles between

2 modes of operation for the internal lights: functional (default) mode and showcase mode. If you are in functional (default) mode, the lights will turn on only when the door is open. If you are in showcase mode, the lights will be on whether or not the door is open.

CONTROL PANEL for SCFF1533B / SCFF52W / SCFF53B / SCFF53BSS / SPFF51OS

ON/OFF Power

To turn the appliance off, press and hold the key for 5 seconds until the temperature display goes off. To turn the appliance on, press and hold the key for 1 second until the temperature display lights up.

NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.

SuperFreeze

SuperFreeze is used to freeze fresh food quickly. The function overrides the thermostat control and will make the compressor operate continuously. It is not necessary to adjust the thermostat setting when using this function. When the function is selected, the SuperFreeze indicator will be ON. The function can be exited by pressing the key again and the indicator will turn OFF. SuperFreeze will turn off automatically after 8 hours.

UP

Used to increase (warm) the set temperature by 1°C/1ºF.

DOWN

Used to decrease (cool) the set temperature by 1°C/1ºF.

10

ºF/ºCSelector

Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the SUPERFREEZE key for 5 seconds.

Setting the Temperature Control

• You can set the temperature by pressing the UP and DOWN keys. When you press either of the two keys for the first time, the LED readout will show the original temperature set previously.

(The temperature preset at the factory is 0°F, or -18°C.)

• The temperature you are setting will increase by one degree each time you press the UP key, and will decrease by one degree each time you press the DOWN key.

• The range of the temperature control is from -11°F to 11°F.

• To view the set temperature at any time, press the UP or DOWN key. The set temperature will flash in the display window for 5 seconds. After 5 seconds, the temperature inside the unit will reappear in the display window.

Interior Light

The unit is equipped with an interior LED light which will be turned ON when the door is open.

NOTE:

If the unit is unplugged, or power is lost or turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the unit will not start.

When you use the unit for the first time or restart the unit after it has been shut off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED readout. This is normal and is due to the length of the activation time. There should not be a problem once the unit has been running for a few hours.

SABBATH MODE

Sabbath mode is available for the observance of certain religious holidays. This mode turns off the displays, interior light and audible alarms and prevents them from turning on again. Normal cooling operations will still take place.

To initiate Sabbath mode, press the POWER and LIGHT keys at the same time for at least 5 seconds for

FF1532B / SPR316OS / FF64B / FF64BSS / SPR627OS, or press the POWER and SUPERFREEZE keys at the same time for at least 5 seconds for SCFF1533B / SCFF52W / SCFF53B / SCFF53BSS /

SPFF51OS. The indicator light will flash four times and confirm that the Sabbath mode is ON.

Sabbath mode can be exited by repeating the above process. The Sabbath Mode will automatically turn off after 48 hours.

TEMPERATURE MEMORY FUNCTION

• In the event of a power interruption (power surge, breaker switch, etc.) , the unit can remember the previous temperature settings, and when the power is recovered, the cabinet temperature will return to the same setting temperature as before the power went off.

DEFROSTING

• The unit defrosts automatically in normal operating conditions.

• The evaporator behind the rear wall of the unit defrosts automatically. The condensate collects in the

11

drainage channel behind the rear wall of the unit, and flows through the drainage hole into the drip tray by the compressor where it evaporates.

• However, frost may accumulate on the evaporator if the unit is repeatedly opened in a high heat or high humidity location. If this frost pattern does not clear within 24 hours, your unit will require manual defrosting.

USING THE FREEZER SCFF1533B / SCFF52W / SCFF53B / SCFF53BSS / SPFF51OS

• These freezers are designed for the long-term storage of frozen food. Storage time is up to three months.

• The storage life of frozen foods varies and the recommended storage time should not be exceeded.

• Pre-packaged commercially frozen food should be stored in accordance with the frozen foods manufacturer’s instructions for a three star frozen food storage compartment or home freezer.

• Place frozen food into the freezer as quickly as possible after purchase. If there are instructions on the packet, carefully follow these instructions regarding storage times.

TEMPERATURE ALARM / DOOR ALARM

• An audible alarm sounds if the storage temperature is not cold enough. The temperature display flashes at the same time.

The cause of the temperature being too high may be:

– Warm fresh food was placed inside

– Too much warm ambient air flowed in when rearranging and removing food

– Power failure for some time

– The appliance is faulty

• The audible alarm is automatically silenced and the temperature display stops flashing when the temperature is sufficiently cold again.

• If the door has been left open for more than 60 seconds, the alarm will sound. Pressing the POWER key once can switch off the audible alarm.

DOOR LOCK

Your unit is provided with a lock and key combination.

The keys are located inside the plastic bag that contains the Instruction Manual . Insert the key into the lock and turn it counter-clockwise to unlock the door. To lock the door, do the reverse operation, making sure the metal pin is engaged completely. Remove the key and put it in a secure place for safekeeping.

SHELVES

To prevent damaging the door gasket, make sure to have the door all the way open when pulling the shelves out of the rail compartment.

• Any of the shelves can be removed to store larger items.

• When removing the shelf out of the rail compartment, make sure to remove all items first. Then move the shelf to the position where the notch of the shelf is exactly under the plastic post and lift the shelf. In order to replace the shelf, repeat steps described above in reverse.

12

CARE AND MAINTENANCE

CLEANING YOUR APPLIANCE

• Turn off the power, unplug the appliance, and remove all items, including shelves.

• Wash the inside surfaces with a solution of warm water and baking soda (about 2 tablespoons of baking soda to a quart of water).

• Wash the shelves with a mild detergent solution.

• Wring excess water out of the sponge or cloth when cleaning the area where the controls are located, or any electrical parts.

• Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth.

• Use an approved stainless steel cleaner to clean the door and handle. Do not use steel wool or a steel brush on the stainless steel.

CAUTION:

Failure to unplug the appliance during cleaning could result in electrical shock or other personal injury.

POWER FAILURE

Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect the contents.

VACATION TIME

• Short vacations: Leave the appliance operating during vacations of less than three weeks.

• Long vacations: If the appliance will not be used for several months, remove all items and turn off the appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly, blocking it open if necessary.

MOVING YOUR APPLIANCE

1. Remove all items.

2. Securely tape down all loose items (shelves) inside your appliance.

3. Turn the adjustable legs up to the base to avoid damage.

4. Tape the door shut.

5. Be sure the appliance stays secure in the upright position during transportation. Also, protect the outside of the appliance with a blanket or similar item.

ENERGY-SAVING TIPS

• The appliance should be located in the coolest area of the room or outdoor location, away from heatproducing appliances and out of direct sunlight.

• Ensure that the unit is adequately ventilated. Never cover air vents.

• Do not keep the door open any longer than necessary.

• Let hot foods cool to room temperature before placing in the unit. Overloading the unit forces the compressor to run longer.

• Be sure to wrap foods properly, and wipe containers dry before placing them in the unit. This cuts down on frost build-up inside the unit.

• Unit shelves and storage bins should not be lined with aluminum foil, wax paper, or paper toweling.

Liners interfere with cold air circulation, making the unit less efficient.

• Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time, and close the door as soon as possible.

13

TROUBLESHOOTING

You can solve many common problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer.

Troubleshooting Guide

PROBLEM

Appliance does not operate.

Appliance is not cold enough.

Appliance turns itself on and off frequently.

The light does not work.

Vibrations

The appliance seems to make too much noise.

The door will not close properly.

Display “E0”,

POSSIBLE CAUSE

Appliance is not connected to a power supply.

The appliance is turned off.

Tripped circuit breaker or a blown fuse.

REMEDY

Connect the appliance.

Switch on the appliance.

Switch on circuit breaker or replace fuse.

Check the set temperature.

Set a lower temperature.

The temperature is not set correctly.

The ambient temperature could require a lower temperature setting.

The door was opened too often.

The door was not closed completely.

Door is not hermetically sealed.

The condenser is too dirty.

The ventilation opening is blocked or too dusty.

The room temperature is higher than average.

A large amount of food has been added to the unit.

The door is open too often.

The door is not closed completely.

The door gasket does not seal properly.

Clean the condenser when necessary.

Clear the obstructions and clean the dust.

Put the appliance in a cooler place.

Leave the appliance to work for a while until the set temperature has been reached.

Do not open the door more often than necessary.

Close door properly.

Check the door seal and clean or replace.

Connect the appliance. Appliance is not connected to a power supply.

Tripped circuit breaker or a blown fuse.

The light was switched off on the control panel.

The appliance is not properly leveled.

Switch on circuit breaker or replace fuse.

Switch on the light.

Level the appliance with the adjustable feet.

The rattling noise may come from the flow of the refrigerant, which is normal. As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerant in your appliance.

If temperature fluctuations occur, the contraction and expansion of the inner walls may cause popping and crackling noises.

The appliance is not properly level.

Do not open the door more often than necessary.

Close door properly.

Check the door seal and clean or replace.

The appliance is not properly level.

The door was reversed and not properly installed.

The gasket is dirty.

The shelves are out of position.

“E0”indicates a communication error for

Level the appliance with the adjustable feet.

Level the appliance with the adjustable feet.

Check the door hinge and reassemble correctly.

Clean the door gasket.

Check the shelves and refit correctly.

Call for service.

14

“E1”. “E2”,

“E3”, “E4”,

“E5” or “E7”.

The alarm sounds and the temperature display flashes.

3-zone models.

“E1” or “E2” indicates that the air temperature sensor has failed.

“E3” or “E4”indicates that the defrost sensor in the evaporator has failed.

“E5” indicates a defrost heater failure.

“E7” indicates a door switch failure.

Has the appliance door been open for longer than 60 seconds? If not, then the temperature has risen higher or fallen lower than the temperature that has been set. This could be due to:

The appliance door being opened too often.

The ventilation opening being covered or too dusty.

A lengthy interruption in the power supply.

A large amount of food has been added to the unit.

The display temperature is out of range.

If yes, close the door.

Do not open the door more often than necessary.

Clear the obstructions and clean the dust.

Leave the appliance to work for a while until the set temperature has been reached.

The icon “--” is lit and flashing in the temperature display.

Only temperatures within the range

0~99°F/-9~37°C for FF1532B /

SPR316OS / SPR627OS / FF64B /

FF64BSS and the range -49~99°F/-

45~37°C for SCFF1533B /

SPFF51OS / SCFF53B / SCFF53BSS

/ SCFF52W can be displayed. If the temperature is not within this range, the icon “--” will be displayed instead.

This is normal.

If you've checked the table above and find that you still need help with your appliance, call our Customer

Service facility at

800-932-4267

between 9:00AM and 5:00PM ET. We will do our best to answer your questions.

This product uses eco-friendly hydrocarbon refrigerant and fully complies with California

CARB regulations.

However, we are required by California Law to provide the following disclosure statement in every product sold in California.

"This equipment is prohibited from use in California with any refrigerants on the 'List of Prohibited

Substances' for that specific end-use, in accordance with California Code of Regulations, title 17, section 95374. This disclosure statement has been reviewed and approved by Felix Storch, Inc. and Felix Storch, Inc. attests, under penalty of perjury, that these statements are true and accurate ."

This product does not use any refrigerants on the 'List of Prohibited Substances'"

15

LIMITED WARRANTY

ONE-YEAR LIMITED WARRANTY

Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a designated service company. Outside the 48 states, all parts are warranted for one year from manufacturing defects. Plastic parts, shelves and cabinets are warranted to be manufactured to commercially acceptable standards, and are not covered from damage during handling or breakage.

5-YEAR COMPRESSOR WARRANTY

1. The compressor is covered for 5 years.

2. Replacement does not include labor.

ITEMS WARRANTOR WILL NOT PAY FOR:

1. Service calls to correct the installation of your appliance, to instruct you how to use your appliance, to replace or repair fuses or to correct wiring or plumbing.

2. Service calls to repair or replace appliance light bulbs or broken shelves. Consumable parts (such as filters) are excluded from warranty coverage.

3. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in accordance with electrical or plumbing codes, or use of products not approved by warrantor.

4. Replacement parts or repair labor costs for units operated outside the United States.

5. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

6. Expenses for travel and transportation for product service in remote locations.

7. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not installed in accordance with published installation instructions.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE

PRODUCT REPAIR AS PROVIDED HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR.

WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME

STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL

DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO

YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER

RIGHTS, WHICH VARY FROM STATE TO STATE.

WARNING: This product can expose you to chemicals including Nickel

(Metallic) which is known to the State of California to cause cancer.

For more information go to www.P65Warnings.ca.gov

Note: Nickel is a component in all stainless steel and some other metallic compositions.

For parts and accessory ordering, troubleshooting and helpful hints, visit: www.summitappliance.com/support

Printed in China 04/2021

16