Digitus professional DS-55101 Manual

HDMI Extender Set

Full HD, 130 m

Manual

DS-55101

The Digitus HDMI Extender Set, Full HD offers an extender solution of up to 130 m for the highest demands. It is used to transmit digital video and audio signals to a maximum distance of up to 130 m (via CAT 6). The highest supported video resolution is 1080p / 60Hz. CAT 5, CAT 5E and CAT 6 network cables are supported.

The package includes two infrared units (transmitter, receiver), which can be used for the remote control of the connected input source. LED display shows the connectivity.

Important Safety Notice

Please read below safety instructions carefully before installation and operation:

1.

Do not hot plug when it is working.

2.

Do not mix up the transmitter unit (TX) and the receiver unit (RX), IR blaster extension cable and IR receiver extension cable before installation.

3.

Use DC5V/1A power supply only. Make sure specification matched if using adapters not supplied by factory.

Feature

1.

Plug and play, without installation.

2.

Include a transmitter unit (TX) and a receiver unit (RX), working as a pair.

3.

Transmission distance up to 120m via CAT6 cable, 100m via CAT5E cable, 80m via CAT5 cable.

4.

Support IR passback for remote control source device to receiver site easily.

5.

Uncompressed and zero latency.

6.

Support resolution is up to full HD 1080p@60Hz.

7.

Compliant with CAT5/5e/6 for long distance transmission.

Package Contents

 1x 4K HDMI Extender transmitter unit

 1x 4K HDMI Extender receiver unit

 2x Power Supply Unit: DC 5V/1A

 1x IR transmitter unit

 1x IR receiver unit

 1x Instruction manual

Power Supply

HDMI

Performance and Interface

Protection

Level

Operating

Environment

Body

Properties

Specification

Voltage/Current

Power consumption

HDMI compliance

HDCP compliance

HDMI resolution

Supports audio formats

DC5V/1A

TX: 2W

HDMI1.3

HDCP1.4

RX: <2W

720x576@50Hz,

720x480@60Hz,

1280x720@60Hz,

1920x1080@60Hz,

640x480@60Hz,

800x600@60Hz,

1024x768@60Hz,

1280x800@60Hz,

1280x1024@60Hz,

1440x900@60Hz,

1680x1050@60Hz

PCM

Maximum transfer rate 10.2Gbps

Input and output TMDS signal 0.5~1.5Vp-p (TMDS)

Input and output DDC signal 5Vp-p(TTL)

Input cable length ≤ 8m (AWG24)

Output cable length

CAT5

CAT5E

CAT6

≤ 8m (AWG24)

80m

100m

130m

Electrostatic protection of the whole machine

1a contact discharge level 3,

1b air discharge level 3, implementation of the standard:

IEC61000-4-2

Working temperature

Storage temperature

0~60°C

-10~70°C

Humidity (no condensation) 0~90%

Dimension

Material

Treatment process

Color

Weight

69.57(L) x 58.80 (W) x

16.10(H) mm

Aluminum alloy material + crystal panel

Grit blast

Black

TX: 70g, RX: 70g

Installation Requirements

1.

HDMI source device

(Computer graphics card, DVD, PS3, HD monitoring equipment etc.).

2.

HDMI display device like SDTV, HDTV, and projector with HDMI port.

3.

UTP/STP CAT5/5e/6 cable, follow standard IEEE-568B.

Penal Description

Transmitter unit (TX)

1) Reset button

2) RJ45 signal output

3) LINK indicator

4) Power input

5) HDMI signal input

6) IR signal output

Restart the unit

Connect with network cable

LED turns on all the time with HDMI signal transmission, flashes with no signal transmission

Connect with DC5V1A power adapter

Connect with source device

Connect with IR blaster extension cable

Receiver unit (RX)

1) Reset button

2) RJ45 signal input

3) LINK indicator

4) Power input

5) HDMI signal output

6) IR signal input

Restart the unit

Connect with network cable

LED turns on all the time with HDMI signal transmission, flashes with no signal transmission

Connect with DC5V1A power adapter

Connect with display device

Connect with IR receiver extension cable

Installation and Connection

A.

How to make a CAT5/5E/6 network cable Follow the standard of IEEE-568B:

1.

White and Orange

2.

Orange

3.

White and Green

4.

Blue

5.

White and Blue

6.

Green

7.

White and Brown

8.

Brown

B.

Connection

HDMI IN

DVD

Transmitter

IR cable

IR

Receiver

HDMI Cable

HDMI Display

C.

Connection

1) Connect source device to Transmitter unit (TX), and display device to Receiver unit (RX) via HDMI cables

2) Connect Transmitter unit (TX) and Receiver unit (RX) via network cables

(CAT5, CAT5e or CAT6)

3) Plug the power supply to Transmitter unit only, each unit will power up then initialize itself, this HDMI extender works

D.

IR User Guide

1) IR blaster extension cable should plug in the IR OUT port of TX (Transmitter) unit of HDMI extender, and the IR receiver extension cable should plug in the IR IN port of the RX (Receiver) unit.

2) The emitter of IR blaster should as close as possible to the IR receiver window of the signal source device.

3) Using the IR remote controller of the signal source device towards the IR receiver

(connected to the RX), to remote control source media playback.

• FAQ

Q:

A:

Q:

A:

Q:

A:

No image output?

1) Check and make sure all cables are connected well;

2) Restart the TX/RX by “RESET” button.

RX “LINK” indicator is flashing all the time?

1) Make sure network cable connection follows the standard of IEEE568B;

2) Check whether transmitter has HDMI signal input;

3) Reset transmitter and receiver and reconnect.

Receiver “LINK” led lights on all the time but no image output?

1) Make sure the monitor supports the current HDMI signal mode

2) Make sure HDMI cable is well connected with TV

3) Make sure the network cable is fine copper wires.

Herby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping content.

If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address. www.assmann.com

Assmann Electronic GmbH

Auf dem Schüffel 3

58513 Lüdenscheid

Germany