Operator’s Manual

CP0611-RTL

1

" Impact Wrench

WARN I N G

To reduce risk of injury, everyone using, installing, repairing, maintaining, changing accessories on, or working near this tool must read and understand these instructions, as well as separately provided safety instructions part number 6159948710, before performing any such task.

2050562933 REV01 07/2014

Air diagram

5/8”(16mm)

1”(25mm)

1" (25mm)

1/2" NPT

5/8”(16mm)

10' (3m) max

Fig. 1

L

A

H

B

Fig. 2

CP0611-RTL

Drive

1

[inch]

1"

Torque

Working Max

Bolt capacity

Speed Weight

Max

Inner

Hose

Dia.

[ft.lbs]

[Nm]

2

900 - 1,800

1,220 - 2,440

[ft.lbs]

[Nm]

2,800

3,790

3

[inch]

[mm]

1-3/4"

M42

4

[min-1]

3500

5

[lb]

[kg]

23.4

10.6

6

[inch]

[mm]

3/4"

20

Dimensions

L x H x W

Air consumption

At load

Air inlet

Sound

Pressure

L pA

Sound

Power

L wA

Vibrations ahd k

H

W

L

7

[inch]

[mm]

13.8" x 6.3" x 4.3"

350 x 160 x 110

8

[SCFM]

[Nl/s]

48.0

22.6

9

[inch]

NPT 1/2" female

97

10

[dB(A)] [dB(A)] [m/s 2 ] [m/s 2 ]

108

11

17.9

12

6.5

Fig. 3

EN

English

1. Technical data (see Fig. 3)

CP0611-RTL

Impact Wrench

Drive

Torque

Working Max

Bolt capacity

Max

Speed Weight

Inner

Hose

Dia.

Dimensions

L x H x W

Air consumption

At load

Air inlet

Sound

Pressure

L pA

Sound

Power

L wA

Vibrations ahd k

H

1

2 3 4 5 6

[inch]

[ft.lbs]

[Nm]

[ft.lbs]

[Nm]

[inch]

[mm]

[min-1]

[lb]

[kg] max pressure 6.3 bar (90 psi). Higher pressure drastically reduces tool life.

[inch]

[mm]

W

L

7

[inch]

[mm]

8

[SCFM]

[Nl/s]

9

[inch] [dB(A)]

10

[dB(A)]

11 12

[m/s 2 ] [m/s 2 ] a hd

: Vibration level, k Uncertainty ; L pA

Sound pressure level dB(A),

Declaration of noise (ISO 15744) and vibration emission (ISO 28927-2):

K pA

= K

WA

= 3 dB Uncertainty

All values are current as of the date of this publication. For the latest information please visit www.cp.com.

These declared values were obtained by laboratory type testing in accordance with the stated standards and are suitable for comparison with the declared values of other tools tested in accordance with the same standards. These declared values are not adequate for use in risk assessments and values measured in individual work places may be higher. The actual exposure values and risk of harm experienced by an individual user are unique and depend upon the way the user works, the workpiece and the workstation design, as well upon the exposure time and the physical condition of the user.

We, CHICAGO PNEUMATIC TOOLS in an individual risk assessment in a work place situation over which we have no control.

This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to managing hand-arm vibration can be found at www. pneurop.eu/uploads/documents/pdf/PN3-02-NV_Declaration_info_sheet_0111.pdf

We recommend a programme of health surveillance to detect early symptoms which may relate to noise or vibration exposure, so that management procedures

2. Machine type

This product is designed for installing and removing threaded fasteners in wood, metal and plastic. No other use permitted. For professional use only.

Please read the product safety information carefully!

Use this impact wrench only with impact rated sockets operating upon threaded fasteners.

3. Implementation and Operation

Connect device as shown in Fig.1 to a clean and dry air supply.

Fix the accessories properly to the tool.

To switch rotation, turn the switch (B) shown in Fig. 2.

To start the machine, simply pull the trigger (A) shown in Fig. 2. Release the trigger to stop.

Use the reverse switch (B) only when the drive spindle comes to a complete stop. Changing the speed before the drive spindle stops may damage the machine.

4. Lubrication

Motor

Use an air line lubricator with SAE #10 oil, adjusted to two (2) drops per minute.

If an air line lubricator cannot be used, add air motor oil to the inlet once a day.

Clutch

Check clutch oil once each month.

Use 2.0 oz. (59ml) of SAE #30 oil or equivalent.

5. Maintenance

Follow local country environmental regulations for safe handling and disposal of all components.

Disassemble and inspect air motor and impacting clutch every three (3) months if the tool is used every day. Replace dammaged or worn pa

High wear parts are underlined in the parts list.

To keep downtime to a minimum, the following service kits are recommended:

C115811 Tune-Up Kit

6. Disposal

The disposal of this equipment must follow the legislation of the respective country.

All damaged, badly worn or improperly functioning devices MUST BE TAKEN OUT OF OPERATION.

Repair only by technical maintenance staff.

7. Declaration of conformity

We: CHICAGO PNEUMATIC Tool Co. 1800 Overview Drive Rock Hill, SC 29730 - USA

Declare that the product(s): Impact Wrench

Machine type(s): CP0611-RTL

Origin of the product: USA

Serial Number: From 00001 to 99999 is in conformity with the requirements of the council Directives on the approximation of the laws of the Member States relating: to “Machinery“ 2006/42/EC

(17/05/2006)

Applicable harmonised standard(s): EN ISO 11148-6:2012

Name and position of issuer: Nicolas Lebreton (R&D Manager)

Place & Date: Saint-Herblain, 17/07/2014

France

Copyright 2014, Chicago Pneumatic Tool Co. LLC

All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers and drawings. Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or

Product Liability.

ORIGINAL INSTRUCTIONS.

www.cp.com