advertisement
![Eppendorf Fast PCR Tube Strips Instructions for use | Manualzz Eppendorf Fast PCR Tube Strips Instructions for use | Manualzz](http://s1.manualzz.com/store/data/065679454_1-b3d34476b96651d384f271c367659601-360x466.png)
Instructions for use
Fast PCR Tubes Strips and Cap Strips
English (EN)
Before using the consumables for the first time, read these instructions for use and the operating manual of the device that you use the consumables with.
1 Safety
1.1
Intended use
Fast PCR Tube Strips and Cap Strips are designed for single use in Fast PCR applications in combination with Fast PCR reagents and Fast PCR programs as well as appropriate cyclers such as the Eppendorf Mastercycler X50.
The products can be used for training, routine and research laboratories in the areas of life sciences, industry or chemistry. This product is intended to be used for research purposes only. Eppendorf does not provide a warranty for other applications. The products are not suitable for use in diagnostic or therapeutic applications. The products may only be used by skilled personnel who have been trained in the areas mentioned above.
WARNING! Risk from hazardous substances.
If the tubes are handled improperly the contents of the tube can splash out or escape.
Only use undamaged tubes and plates.
Do not fill the tubes and plates above the permitted total volume.
Make the necessary safety arrangements for transport or storage to prevent materials escaping from the tube. Use stands that are suitable for the tubes.
Do not freeze the tubes and plates with liquid nitrogen.
Seal the tubes and plates carefully.
WARNING! Damage to health from toxic, radioactive or aggressive chemicals as well as infectious liquids and pathogenic germs.
Observe the national regulations for handling these substances, the biological security level of your laboratory, the material safety data sheets and the manufacturer's application notes.
Wear your personal protective equipment.
Consult the "Laboratory Biosafety Manual" (source: World Health Organization,
Laboratory Biosafety Manual, in its respectively current valid version).
2
Instructions for use
Fast PCR Tubes Strips and Cap Strips
English (EN)
CAUTION! Risk of contamination when disposing of used consumables.
Dispose of used consumables in accordance with the substances with which they have come into contact.
Observe the rules that apply to your laboratory.
NOTICE! Material damage from incorrect use.
Only use the product for its intended purpose as described in the operating manual.
Ensure adequate material resistance when using chemical substances.
In case of any doubts, contact the manufacturer of this product.
2 Product description
Fast PCR Tube Strips are thin-walled and thermally conductive tubes in strip format.Cap
Strips are tube lids for Fast PCR Tube Strips and PCR plates.
3 Application
3.1
Closing tubes with Cap Strips
1. Position the Cap Strips marked A and H on a tube strip.
H
A
Instructions for use
Fast PCR Tubes Strips and Cap Strips
English (EN)
3
2. Press the Cap Strips firmly onto the tubes.
The tool shown in the image can be used as an aid.
3. Check that the Cap Strips are correctly positioned on the tube strip.
3.2
Removing Cap Strips
Pull the Cap Strips off upward.
3.3
Loading the thermoblock of a thermal cycler with Fast PCR Tube
Strips
Fast PCR Tube Strips may become deformed at high temperatures. To prevent deformations:
• Increase the number of empty sample tubes in the thermoblock.
Place the Fast PCR Tube Strips into the center of the thermoblock and ensure that they are symmetrically positioned.
Load the thermoblock with at least 2 Fast PCR Tube Strips. If you have fewer reaction batches, also add empty Fast PCR Tube Strips to make sure the thermoblock is loaded with at least 2 Fast PCR Tube Strips.
4
Instructions for use
Fast PCR Tubes Strips and Cap Strips
English (EN)
4 Technical data
Material Polyethylene
Operational temperature -86 °C
Autoclavability
Centrifugation stability not autoclavable
Suitable for centrifugation at up to 10 fixed-angle rotor.
000 x g in 45°
Eppendorf purity grade
Storage before use
Eppendorf PCR tubes are not suitable for centrifuging organic solvents. If in doubt, contact Eppendorf Application Support.
Batch testing (certified) for the following purity criteria:
Human DNA-free, DNase-free, RNase-free and free of PCR inhibitors*.
Protect from direct sunlight and UV light.
Store dry at ambient temperature.
*) Batch-specific certificates are available on the Internet at: www.eppendorf.com/ certificates.
Instructions for use
Fast PCR Tubes Strips and Cap Strips
English (EN)
5 Ordering information
Order no.
(International)
0030 124.901
0030 124.928
0030 124.910
0030 124.804
0030 124.812
0030 124.820
0030 132.874
0030 124.839
0030 124.847
0030 132.882
0030 132.890
0030 124.545
Order no.
(North America)
Description
0030124901
0030124928
0030124910
0030124804
0030124812
0030124820
951022089
0030124839
0030124847
951022102
951022109
Eppendorf Fast PCR Tube Strips
0.1 mL
PCR clean, without lids (10
PCR clean, with Cap Strips, domed (10
PCR clean, with Cap Strips, flat (10
Eppendorf PCR Tube Strips
0.1 mL without lids (10
PCR clean, with Cap Strips, domed (10
PCR clean, with Cap Strips, flat (10
Masterclear Cap Strips
10 ×
Cap Strips
8-strips domed, 120 pcs. (10 flat, 120 pcs. (10 real-time PCR Tube Strips
0.1 mL, without caps, 10 real-time PCR Tube Strips and Masterclear Cap
Strips
10 12 strips each
PCR Rack
0030124545
Your local distributor: www.eppendorf.com/contact
Eppendorf AG · Barkhausenweg 1 · 22339 Hamburg · Germany [email protected] · www.eppendorf.com
advertisement
Related manuals
advertisement