EWS5207
Secure WLAN Controller
Quick Installation Guide
EWS5207 Secure WLAN Controller ENGLISH
Copyright Notice
This document is protected by USA copyright laws and other laws and is the property of Edgecore Networks Corporation. You may not copy, reproduce, distribute, publish, display, perform, or modify any part of this publication in any form or by any means without prior written permission from Edgecore
Networks Corporation. You may not alter or remove any copyright or other notice from copies of the content. All other brand and product names are claimed or registered marks of their respective companies or organizations.
All rights reserved.
Quick Installation Guide
EWS5207 Secure WLAN Controller ENGLISH
FCC Caution
This equipment has been tested and proven to comply with the limits for a class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
CE Caution
The device has been tested and passed the requirements of the following standards, and hence fulfills the EMC and safety requirements within the CE marking requirement.
EMC: EN 55032:2012 + AC:2013 Class A, EN 61000-3-2:2014 Class A, EN
61000-3-3:2013 including the followings:
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4,
EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11
Safety: EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
Preface
This Quick Installation Guide provides instructions and reference material for getting started with the Edgecore EWS5207
Secure WLAN Controller. This guide will also show how to connect Edgecore
EWS5207 to other network equipment.
Quick Installation Guide
EWS5207 Secure WLAN Controller ENGLISH
Package Contents
1. EWS5207 x 1
2. Quick Installation Guide (QIG) x 1
3. Power Cord x 2
4. Console Cable x 1
5. Cushion x 4
6. HDD Key x 2
It is highly recommended to use all the supplies in the package instead of substituting any components by other suppliers to guarantee best performance.
①
System Overview
Front Panel
Quick Installation Guide
EWS5207 Secure WLAN Controller ENGLISH
1. LED Indicators : There are four kinds of LED to indicate the different status of the system.
LED on (orange)
ERR (Power Error)
LED off
STBY (System Standby) LED on (orange)
Either one fail
LED blinking (green) HDD Read/Write activity
HDD (Hard Disk)
PSU status normal
Always on
LED off No data transferring
PWR (Power)
LED on (green)
LED off
Power on
Power off
2. LCD Display : Allows network administrator to check important system settings such as network interface,
SZ configurations, etc. The navigation buttons from left to right are “ ESC ”, “ Up ”, “ Down ”, and “ Enter ”.
3. Console : The system can be configured via a RJ-45 console port. The administrator can use a terminal emulation program such as Microsoft’s Hyper Terminal to login to the configuration console interface to change admin password or monitor system status, etc.
4. USB : Reserved for future use.
5. MGM Ports: For administrator to manage EWS5207.
6. Reset : Press the reset button to restart the system.
7. 10G SFP+ Ports: Two WAN 10G SFP+ ports are connected to the external network such as the ADSL
Router from your ISP. The other two 10G SFP+ ports for the LAN connections.
1
2
3
4
WAN1
WAN2
LAN7
LAN8
②
Quick Installation Guide
EWS5207 Secure WLAN Controller ENGLISH
8. RJ45 Ethernet Ports : Two 10/100/1000 Base-T WAN ports are connected to the external network, such as the ADSL Router from your ISP. The other six ports for the LAN connections.
5
6
7
8
WAN1
LAN1
LAN2
LAN3
9
10
11
12
WAN2
LAN4
LAN5
LAN6
Rear Panel
9. Power Switch: For Powering the Device On/Off.
10. VGA Connector: For connection to a Monitor if needed.
11. USB: Reserved for future use.
12. Power Supply Socket: Connecting the power cord to the built-in power supply.
③
Hardware Installation
Please follow the following steps to install EWS5207:
Quick Installation Guide
EWS5207 Secure WLAN Controller ENGLISH
1. Connect the power cord to the power socket on the rear panel.
2. Turn on the power switch on the rear panel. The Power LED should be on to indicate a proper connection.
3. Connect an Ethernet cable to the WAN1 Port on the front panel. Connect the other end of the Ethernet cable to an xDSL/cable modem, or a switch/hub of an internal network. The LED of this port should be on to indicate a proper connection.
4. Connect an Ethernet cable to any LAN Port on the front panel. Connect the other end of the Ethernet cable to an administrator PC for configuring the EWS5207 system, an AP for extending wireless coverage, a switch for connecting more wired clients, or a client PC. The LED of this LAN port should be on to indicate a proper connection.
④
Quick Installation Guide
EWS5207 Secure WLAN Controller ENGLISH
Getting Started
< System Concept >
The Edgecore EWS5207 Secure WLAN Controller in Gigabit Ethernet with built-in local accounts, On-Demand accounts, is an ideal security solution for larger-scale WLAN deployments, including WISP, enterprises, campuses, hotels, airport terminals, and MDUs/MTUs. The EWS5207 integrates “secure access control”,
“visitor account provisioning”, “flexible accounting and billing”, and “centralized WLAN management” into one box to provide simplified manageability and instant mobility. With more powerful hardware, EWS5207 is capable of centrally managing access points to cover a wider service area in a larger network.
Secure Business Networking
EWS5207 is suitable for business in managing their wired and wireless network access uniformly. The network access of users from different departments and the access of guests can be segregated in different Service
Zones. When needed, EWS5207 Local, Site-to-Site and Remote VPN tunnels can be used to further secure the information flows for business. Mobile workers on the road or home-based teleworkers can securely access the office network through remote VPN tunnels.
【 EWS5207 in a Business Headquarter 】
⑤
Quick Installation Guide
EWS5207 Secure WLAN Controller ENGLISH
College Dormitories, Apartments or Hotels Networking
For college dormitories, apartments or hotels who want to cater for their tenants’ Internet access needs,
EWS5207 makes it easy to manage new tenant registrations and share bandwidth equally among tenants.
Also, it is convenient to set up EWS5207 to offer wireless Internet service at large events, such as conventions, trade shows, and student spring break gatherings.
【 An example of managed network in a Campus environment 】
Telcos or Wireless ISP (WISP)’s Large Hotspot Deployment
For Telcos or large hotspot operators, EWS5207 brings in a convenient and economical way to deploy distributed hotspot services. While most of the operators prefer to use external RADIUS servers as authentication database, EWS5207 in this architecture can play the role of a central RADIUS-NAS. For quick deployment, EWS5207 supports two authentication methods: Web UAM and 802.1X. It is capable of supporting customized web UAM pages uploaded locally as well as external web UAM pages residing on external web servers. Furthermore, the concept of Service Zones of EWS5207 allows one Controller to manage multiple franchised hotspots simultaneously.
Hotel with Property Management System (PMS)
For hotels using Property Management System (PMS) such as Micros Fidelio/Opera, EWS5207 even enables
Internet access charges to be incorporated into the room bill. Moreover, customers are able to purchase
Internet service in room anytime or at the front counter. With a single account, a hotel guest can log on the
Internet in room through a wired Ethernet port or enjoy wireless access throughout the hotel property. Before the account expires or the quota purchased reaches its limit, the guest who wants to surf the Internet in his/her room does not need to retype the password. EWS5207 stands for the most cost-effective and easy-to-setup
Internet Access Controller for hotels. Not only can EWS5207 manage and bill both wireless and in-room wired
Internet services for properties that have adopted modern IP network infrastructure, but it works for those who only utilize traditional phone lines coupled with DSLAM and DSL modem equipment to deliver Internet to each room.
⑥
Quick Installation Guide
EWS5207 Secure WLAN Controller ENGLISH
【 EWS5207 in a Hotel – Capable of integrating with DSLAM and PMS 】
In summary, the feature-rich EWS5207 supports multiple business models of Internet Access Services - be it for managing wireless or wired clients. It can be configured to fit for private corporations, government agencies, academic campuses, multi-tenant units (MTU), hotels, WISP or telco’s hotspot operations. The Edgecore
EWS-series products aim to offer the best price-performance among all access controllers on nowadays market.
⑦
Quick Installation Guide
EWS5207 Secure WLAN Controller ENGLISH
< Web Management Interface >
Edgecore EWS5207 supports web-based management interface. Upon the completion of hardware installation,
EWS5207 can be configured via web browsers with JavaScript enabled such as Internet Explorer version 9.0 and above or Firefox.
1. To access the web management interface, connect a PC to one of the LAN ports, and then launch a browser. Make sure you have set DHCP in TCP/IP of your PC to get an IP address dynamically.
2. Next, enter the gateway IP address of EWS5207 default Service Zone in the address field. The default gateway IP address is “http://192.168.1.254” ( “https” is used for a secured connection).
3. The administrator login page will appear. Enter “admin” , the default username, and “admin” , the default password, in the User Name and Password fields. Click Login to log in.
⑧
Quick Installation Guide
EWS5207 Secure WLAN Controller ENGLISH
4. After a successful login, the system prompts for the administrator to change password to enforce system security. The password needs to be at least 6 characters long and include at least one alphabet and one number.
5. When the password has been successfully changed, the main welcome page of the administrator interface will appear.
⑨
Quick Installation Guide
EWS5207 Secure WLAN Controller ENGLISH
If you can’t get the login screen, the reasons may be: (1) The PC is set incorrectly so that the PC can’t obtain the IP address automatically from the LAN port; (2) The IP address and the default gateway are not under the same network segment. Please use default IP address such as 192.168.1.xx in your network and then try it again.
⑩
Quick Installation Guide
EWS5207 Secure WLAN Controller ENGLISH
Common Settings
< Setup Wizard >
EWS5207 provides a Setup Wizard for quick configuration. To quickly configure EWS5207 by using the Setup Wizard , click on the Setup
Wizard button on the top right corner to start the configuration process.
Step 2: WAN1 Interface
Select a proper type of Internet connection for
WAN1 interface from the following three available connections: Static , Dynamic , or
PPPoE . Your ISP or network administrator can advise on the connection type available to you. Below depicts an example of Dynamic .
Click Next to continue.
Step 1: General
Time Zone drop-down list box to set up the system time.
Click Next to continue.
Step 3: Local User Account (Optional)
New local accounts can be created and added into the database via this optional function. If local user accounts are not required, click Skip to go directly to Step 4 . However, It is recommended to create at least one local user account in order to verify the system‘s readiness upon completion of this Setup
Wizard .
Enter the Username (e.g. testuser ),
Password (e.g. testuser ) to create a new local account.
Click Next to continue.
More local accounts can be added by clicking the Back button in Step 4 .
⑪
Step 4: Confirm and Restart EWS5207
Click Finish to save current settings and restart the system.
Quick Installation Guide
EWS5207 Secure WLAN Controller ENGLISH
When the following Administrator Login Page appears, it means the restart process is now completed.
A confirmation dialog box will then appear.
Click OK to continue.
A Confirm and Restart message will appear on the screen during the restarting process.
Please do not interrupt the system until the
Administrator Login Page appears.
Note:
The system is trying to locate a DNS server at this stage. Therefore, a longer startup time is required if the configured DNS cannot be found.
⑫
< User Login >
To verify whether the configuration of the new local user account(s) created via the Setup Wizard has been completed successfully:
1. Connect a client device (e.g. laptop, PC) to any LAN Ports. The device will obtain an IP address automatically via DHCP
2. Open a web browser on a client device and access any URL, the default User Login
Page will appear.
3. Enter the Username and Password of a local user account previously generated via Setup
Wizard (e.g.
“testuser@local” as the
Username and “testuser” as the Password ); then click Login .
Quick Installation Guide
EWS5207 Secure WLAN Controller ENGLISH
Note:
1. EWS5207 supports multiple authentication options including built-in local user database and external authentication database (e.g.
RADIUS). The system will automatically identify which authentication option is used from the full username entered.
2. The format of a full (valid) username is userid@postfix , where “userid” is the user
ID and “postfix” is the name of the selected authentication option.
3. Exception: The postfix can be omitted only when the default authentication option is used. For example, “LOCAL” is the default authentication option at this system; therefore, you may enter either “ testuser ” or
“ testuser @local” in the Username field.
Congratulations!
The Login Success Page will appear after a client has successfully logged into EWS5207 and has been authenticated by the system.
The appearance of Login Success page means that EWS5207 has been installed and configured properly.
⑬
< Service Zone & AP Management >
Edgecore EWS5207 has introduced an important new concept called “Service Zone” . For how to set up Service Zones, please refer to the User’s
Manual .
EWS5207 can centrally manage multiple access points (APs). For how to set up the “AP
Management” feature, please refer to the “AP
Management” section of the User’s Manual.
For further configuration and information, please refer to the User’s Manual.
P/N: V34320180816
Quick Installation Guide
EWS5207 Secure WLAN Controller ENGLISH
⑭
