Canon EOS 1D Mark III Instruction manual

E

E

INSTRUCTION

MANUAL

Thank you for purchasing a Canon product.

The EOS-1D Mark III is a top-of-the-line, high-performance digital SLR camera with a large, fine-detail, 10.10-megapixel CMOS sensor and

Dual “DIGIC III”. It also features high-precision and high-speed 45-point

Area AF (19 cross-type points and 26 Assist AF points) and approx. 10 fps high-speed continuous shooting.

The camera is highly responsive to any shooting situation, provides many features for demanding shoots, highly reliable even in harsh environments, and compatible with a wide range of accessories.

It also incorporates a Self Cleaning Sensor Unit called the EOS

Integrated Cleaning System to remove dust on the sensor.

Take a few test shots to familiarize yourself with the camera

With a digital camera, you can immediately view the image you have captured. While reading this manual, take a few test shots and see how they come out. You can then better understand the camera.

To avoid botched pictures and accidents, read the Safety Warnings

(p.10,11) and Handling Precautions (p.12,13).

Test the Camera Before Using

After shooting, playback and check the image whether it has been properly recorded.

If the camera or memory card is faulty and the images cannot be recorded or downloaded to the personal computer, Canon cannot be held liable for any loss or inconvenience caused.

Copyrights

Copyright laws in your country may prohibit the use of your recorded images of people and certain subjects for anything but private enjoyment. Also be aware that certain public performances, exhibitions, etc., may prohibit photography even for private enjoyment.

2

Item Check List

Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer. The accessories included can also be checked in the System Map (p.194).

 Camera: EOS-1D Mark III

(includes eyecup, body cap, battery compartment cap, and installed battery for the date/time clock)

Battery: Battery Pack LP-E4 (with protective cover)

Charger: Battery Charger LC-E4 (with two protective covers)

 Power cord

 AC Adapter Kit ACK-E4

 AC Adapter AC-E4

DC Coupler DR-E4 (with protective cover)

 Power cord

 2 cables

 Interface Cable IFC-200U

 Video Cable VC-100

USB cable protector (with attaching screw)

 Wide Strap L6

 CD-ROMs

EOS DIGITAL Solution Disk (bundled software)

Software Instruction Manual (PDF)

 Pocket Guide

Quick start guide to shooting.

EOS-1D Mark III Instruction Manual (this booklet)

 CD-ROM Guide

Guide to the bundled software and Software Instruction Manual.

 Camera Warranty Card

* Be careful not to lose any of the above items.

* The two power cords are identical.

* No memory card (for recording images) is included. Please purchase it separately.

* To attach the USB cable protector, see the Software Instruction Manual.

3

Conventions Used in this Manual

Icons in this Manual

<6> indicates the Main Dial.

<5> indicates the Quick Control Dial.

<9> indicates the Multi-controller.

<0> indicates the SET button.

9 or 8 indicates that the respective function remains active for 6 sec. or 16 sec. respectively after you let go of the button.

In this manual, the icons and markings indicating the camera’s buttons, dials, and settings correspond to the icons and markings on the camera and on the LCD monitor.

The <3> icon indicates a function which can be changed by pressing the <M> button and changing the setting.

For more information, reference page numbers are provided in parentheses (p.**).

In this manual, “camera is ready to shoot” (shooting-ready) refers to the condition where the camera is turned on and no menu or image is displayed on the LCD monitor. The camera can thereby shoot immediately.

About the Symbols

: Warning to prevent shooting problems.

: The Note symbol gives supplemental information.

Basic Assumptions

All operations explained in this manual assume that the power switch is already set to <1> or <J>. (p.36)

<5> operations explained in this manual assume that the power switch is already set to <J>.

It is assumed that all the menu settings and Custom Functions are set to the default.

It is assumed that a memory card (CF card <f> or SD card <g>) is being used.

For explanatory purposes, the instructions show the camera attached with an EF50mm f/1.4 USM lens.

4

Contents

1

2

Introduction

Item Check List ..................................................................................................3

Conventions Used in this Manual.......................................................................4

Index to Features ...............................................................................................8

Handling Precautions .......................................................................................12

Quick Start Guide.............................................................................................14

Nomenclature...................................................................................................16

1

2

Getting Started 25

Recharging the Battery ....................................................................................26

Installing and Removing the Battery ................................................................29

Using a Household Power Outlet .....................................................................31

Installing and Removing the Memory Card ......................................................32

Mounting and Detaching a Lens ......................................................................35

Basic Operation................................................................................................36

Menu Operations..............................................................................................41

Menu Settings ...............................................................................................43

Before You Start...............................................................................................46

Setting the Interface Language.....................................................................46

Setting the Date and Time ............................................................................46

Set the power-off time/Auto power off...........................................................47

Formatting the Memory Card ........................................................................47

Reverting Camera Settings to the Default ....................................................49

3

4

5

6

7 Image Settings 51

Setting the Image-recording Quality.................................................................52

Selecting the Image Size ..............................................................................52

Setting the JPEG Quality (Compression Rate) .............................................55

Setting the ISO Speed .....................................................................................56

Selecting a Picture Style ..................................................................................57

Customizing the Picture Style ..........................................................................59

Registering the Picture Style............................................................................61

Selecting the White Balance ............................................................................63

Custom White Balance.....................................................................................64

Setting the Color Temperature.........................................................................69

White Balance Correction ................................................................................70

Setting the Color Space ...................................................................................72

Selecting the Media, Folder, and Recording Method .......................................73

Changing the File Name ..................................................................................77

File Numbering Methods ..................................................................................79

8

9

10

11

5

Contents

6

3

4

5

6

Setting the AF and Drive Modes 81

Selecting the AF Mode .................................................................................... 82

Selecting the AF Point..................................................................................... 84

When Autofocus Fails...................................................................................... 86

Manual Focusing .......................................................................................... 86

Selecting the Drive Mode ................................................................................ 87

Self-timer Operation ........................................................................................ 88

Exposure Control 89

Metering Modes............................................................................................... 90

Program AE..................................................................................................... 92

Shutter-Priority AE........................................................................................... 94

Aperture-Priority AE......................................................................................... 96

Depth-of-Field Preview................................................................................. 97

Manual Exposure ............................................................................................ 98

Exposure Compensation ................................................................................. 99

Auto Exposure Bracketing (AEB) .................................................................. 100

AE Lock ......................................................................................................... 101

Bulb Exposures ............................................................................................. 102

Mirror Lockup................................................................................................. 104

Flash Photography ........................................................................................ 105

Live View Shooting 109

Live View Shooting........................................................................................ 110

Image Playback 115

Image Playback............................................................................................. 116

Shooting Information Display ......................................................................117

Index Display, Jump Display .......................................................................119

Magnified View ........................................................................................... 120

Rotating an Image ...................................................................................... 121

Viewing the Images on TV ......................................................................... 122

Protecting Images ......................................................................................... 123

Sound Recording........................................................................................... 124

Copying Images ............................................................................................ 125

Erasing Images ............................................................................................. 128

Changing Image Playback Settings............................................................... 129

Setting the LCD Monitor Brightness ........................................................... 129

Setting the Image Review Time ................................................................. 129

Auto Rotate of Vertical Images................................................................... 130

Contents

7

8

9

10

11

Sensor Cleaning 131

Automatic Sensor Cleaning............................................................................132

Appending Dust Delete Data..........................................................................133

Manual Sensor Cleaning................................................................................135

1

Direct Printing from the Camera/Digital Print Order Format 137

Preparing to Print ...........................................................................................138

Printing ...........................................................................................................140

Trimming the Image ....................................................................................146

Digital Print Order Format (DPOF).................................................................147

Direct Printing with DPOF ..............................................................................150

2

3

Transferring Images to a Personal Computer 151

Transferring Images to a Personal Computer ................................................152

4

Customizing the Camera and Saving Camera Settings 155

Setting Custom Functions ..............................................................................156

Custom Functions .......................................................................................157

Custom Function Settings ..............................................................................158

C.Fn I: Exposure.......................................................................................158

C.Fn II: Image/Flash exposure/Display......................................................163

C.Fn III: Auto focus/Drive............................................................................166

C.Fn IV: Operation/Others ..........................................................................173

Registering and Applying Custom Function Settings .....................................179

Registering My Menu .....................................................................................181

Saving and Loading Camera Settings............................................................182

Registering Basic Camera Settings ...............................................................184

Reference 185

Camera Settings & Battery Information..........................................................186

Replacing the Date/Time Battery ...................................................................188

Program Line..................................................................................................189

Troubleshooting Guide...................................................................................190

Error Codes....................................................................................................193

System Map ...................................................................................................194

Specifications .................................................................................................196

Index ..............................................................................................................206

5

6

7

8

9

10

11

7

Index to Features

Power

Battery

• Charging

• Calibration

• Battery check

• Battery information

Power outlet

Auto power off

Î p.26

Î p.28

Î p.29

Î p.187

Î p.31

Î p.47

Menus & Basic Settings

Menus Î p.43

Camera setting display Î p.186

LCD brightness adjustment Î p.129

Language Î p.46

Date/Time

Beeper

Shoot w/o card

Î

Î

Î

p.46

p.43

p.43

Recording Images

Memory card formatting Î p.47

Selecting the memory card Î p.73

Create/select a folder

File name

Î

Î

p.75

p.77

Recording methods

• Automatic card switching Î p.74

• Separate recording Î p.74

• Recording identical images Î p.74

File No.

Î p.79

Copying images Î p.125

Image Quality

Image size Î p.52

JPEG quality (Compression rate) Î p.55

ISO speed Î p.56

• ISO speed extension Î p.158

• ISO speed increments Î p.158

8

Picture Style

Color space

Î

Î

p.57

p.72

Custom Functions for image quality

• Noise reduction for long exposures Î p.163

• Noise reduction for high ISO Î p.163

• Highlight tone priority Î p.164

• ISO safety shift Î p.160

White balance

White balance selection Î p.63

Custom WB Î p.64

Color temperature setting Î p.69

White balance correction Î p.70

WB bracketing Î p.71

AF

AF mode

AF point selection

Î p.82

Î p.84

AF Custom Functions

• 19 points/9 points

• AF point expansion

Î p.170

Î p.170

• AI Servo tracking sensitivity Î p.166

• AI Servo AF tracking method

• AF Servo operation

• AF fine adjustment

Î p.167

Î p.166

Î p.169

Manual focusing Î p.86

Metering

Metering mode

Multi-spot metering

Drive

Drive modes

Maximum burst

Î p.90

Î p.91

Î p.87

Î p.53

Index to Features

Mirror lockup

Self-timer

Î p.104

Î p.88

Shooting

Program AE

Shutter-priority AE

• Safety shift

Aperture-priority AE

Manual exposure

Bulb

Î p.92

Î p.94

Î p.160

Î p.96

Î p.98

Î p.102

Exposure adjustment

Exposure compensation Î p.99

AEB Î p.100

AE lock Î p.101

Exposure level increments Î p.158

Flash

External flash Î p.105

External flash control

• Flash settings Î p.106

• Flash Custom Functions Î p.106

Live View shooting

Live View shooting

• Grid

• Aspect ratio

• Exposure simulation

Î p.110

Î p.114

Î p.178

Î p.178

Image playback

Image review time Î p.129

Single image playback Î p.116

• Shooting information display

• Highlight alert

• AF point display

Index display

Î p.117

Î p.118

Î

Î

p.118

p.119

Magnified view

Image browsing

(Jump display)

Image Rotate

Auto rotate of vertical images

Image protect

Sound recording

Image erase

Video OUT

Î p.120

Î p.119

Î p.121

Î p.130

Î p.123

Î p.124

Î p.128

Î p.122

Camera Direct Printing/DPOF

PictBridge

Print Order (DPOF)

Image transfer

• Transfer order

Î p.137

Î p.147

Î p.152

Î p.154

Customization

Custom Functions (C.Fn) Î p.155

• Registering settings Î p.179

My Menu Î p.181

Saving camera settings Î p.182

Registering basic camera settings Î p.184

Sensor cleaning/Dust reduction

Sensor cleaning

• Clean now

• Disable auto cleaning

• Manual cleaning

Add Dust Delete Data

Î p.132

Î p.132

Î p.135

Î p.133

Viewfinder

Dioptric adjustment

Eyepiece shutter

Changing the focusing screen

Î p.39

Î p.103

Î p.176

9

Safety Warnings

Follow these safeguards and use the equipment properly to prevent injury, death, and material damage.

Preventing Serious Injury or Death

• To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards below:

- Do not use any batteries, power sources, and accessories not specified in this booklet. Do not use any home-made or modified batteries.

- Do not short-circuit, disassemble, or modify the battery pack or back-up battery. Do not apply heat or apply solder to the battery pack or back-up battery. Do not expose the battery pack or back-up battery to fire or water. And do not subject the battery pack or back-up battery to strong physical shock.

- Do not install the battery pack or back-up battery in reversed polarity (+ –). Do not mix new and old or different types of batteries.

- Do not recharge the battery pack outside the allowable ambient temperature range of 0°C - 40°C (32°F - 104°F). Also, do not exceed the recharging time.

- Do not insert any foreign metallic objects into the electrical contacts of the camera, accessories, connecting cables, etc.

• Keep the back-up battery away from children. If a child swallows the battery, consult a physician immediately. (Battery chemicals may harm the stomach and intestines.)

• When disposing of a battery pack or back-up battery, insulate the electrical contacts with tape to prevent contact with other metallic objects or batteries. This is to prevent fire or an explosion.

• If excessive heat, smoke, or fumes are emitted during battery pack recharging, immediately unplug the battery charger from the power outlet to stop the recharging and prevent a fire.

• If the battery pack or back-up battery leaks, changes color, deforms, or emits smoke or fumes, remove it immediately. Be careful not to get burned in the process.

• Prevent any battery leakage from contacting your eyes, skin, and clothing. It can cause blindness or skin problems. If the battery leakage contacts your eyes, skin, or clothing, flush the affected area with lots of clean water without rubbing it. See a physician immediately.

• During the recharging, keep the equipment away from the reach of children. The cord can accidentally choke the child or give an electrical shock.

• Do not leave any cords near a heat source. It can deform the cord or melt the insulation and cause a fire or electrical shock.

• Do not fire the flash at someone driving a car. It may cause an accident.

• Do not fire the flash near a person’s eyes. It may impair the person’s vision. When using flash to photograph an infant, keep at least 1 meter away.

• Before storing the camera or accessory when not in use, remove the battery pack and disconnect the power plug. This is to prevent electrical shock, heat generation, and fire.

• Do not use the equipment where there is flammable gas. This is to prevent an explosion or fire.

10

• If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the internal parts due to the possibility of electrical shock.

• Do not disassemble or modify the equipment. High-voltage internal parts can cause electrical shock.

• Do not look at the sun or an extremely bright light source through the camera or lens.

Doing so may damage your vision.

• Keep the camera from the reach of small children. The neck strap can accidentally choke the child.

• Do not store the equipment in dusty or humid places. This is to prevent fire and electrical shock.

• Before using the camera inside an airplane or hospital, check if it is allowed.

Electromagnetic waves emitted by the camera may interfere with the plane’s instruments or the hospital’s medical equipment.

• To prevent fire and electrical shock, follow the safeguards below:

- Always insert the power plug all the way in.

- Do not handle a power plug with wet hands.

- When unplugging a power plug, grasp and pull the plug instead of the cord.

- Do not scratch, cut, or excessively bend the cord or put a heavy object on the cord.

Also do not twist or tie the cords.

- Do not connect too many power plugs to the same power outlet.

- Do not use a cord whose insulation has been damaged.

• Occasionally unplug the power plug and use a dry cloth to clean off the dust around the power outlet. If the surrounding is dusty, humid, or oily, the dust on the power outlet may become moist and short-circuit the outlet to cause a fire.

Preventing Injury or Equipment Damage

• Do not leave equipment inside a car under the hot sun or near a heat source. The equipment may become hot and cause skin burns.

• Do not carry the camera around while it is attached to a tripod. Doing so may cause injury. Also make sure the tripod is sturdy enough to support the camera and lens.

• Do not leave a lens or lens-attached camera under the sun without the lens cap attached. Otherwise, the lens may concentrate the sun’s rays and cause a fire.

• Do not cover or wrap the battery-recharging apparatus with a cloth. Doing so may trap heat within and cause the casing to deform or catch fire.

• If you drop the camera in water or if water or metal fragments enter inside the camera, promptly remove the battery pack and back-up battery. This is to prevent fire and electrical shock.

• Do not use or leave the battery pack or back-up battery in a hot environment. Doing so may cause battery leakage or a shorter battery life. The battery pack or back-up battery can also become hot and cause skin burns.

• Do not use paint thinner, benzene, or other organic solvents to clean the equipment.

Doing so may cause fire or a health hazard.

If the product does not work properly or requires repair, contact

your dealer or your nearest Canon Service Center.

11

Handling Precautions

Camera Care

This camera is a precision instrument. Do not drop it or subject it to physical shock.

The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult your nearest

Canon Service Center. Wipe off any water droplets with a dry cloth. If the camera has been exposed to salty air, wipe with a well-wrung wet cloth.

Never leave the camera near anything having a strong magnetic field such as a magnet or electric motor. Also avoid using or leaving the camera near anything emitting strong radio waves such as a large antenna. Strong magnetic fields can cause camera misoperation or destroy image data.

Do not leave the camera in excessive heat such as in a car in direct sunlight.

High temperatures can cause the camera to malfunction.

The camera contains precision electronic circuitry. Never attempt to disassemble the camera yourself.

Use a blower to blow away dust on the lens, viewfinder, reflex mirror, and focusing screen. Do not use cleaners that contain organic solvents to clean the camera body or lens. For stubborn dirt, take the camera to the nearest

Canon Service Center.

Do not touch the camera’s electrical contacts with your fingers. This is to prevent the contacts from corroding. Corroded contacts can cause camera misoperation.

If the camera is suddenly brought in from the cold into a warm room, condensation may form on the camera and internal parts. To prevent condensation, first put the camera in a sealed plastic bag and let it adjust to the warmer temperature before taking it out of the bag.

If condensation forms on the camera, do not use the camera. This is to avoid damaging the camera. If there is condensation, remove the lens, memory card and battery from the camera, and wait until the condensation has evaporated before using the camera.

If the camera will not be used for an extended period, remove the battery and store the camera in a cool, dry, well-ventilated location. Even while the camera is in storage, press the shutter button a few times once in a while to check that the camera is still working.

Avoid storing the camera where there are corrosive chemicals such as a darkroom or chemical lab.

If the camera has not been used for an extended period, test all its functions before using the camera. If you have not used the camera for some time or if there is an important shoot coming up, have the camera checked by your

Canon dealer or check the camera yourself and make sure it is working properly.

12

Handling Precautions

LCD Panel and LCD Monitor

Although the LCD monitor is manufactured with very high precision technology with over 99.99% effective pixels, there might be a few dead pixels among the remaining 0.01% or less pixels. Dead pixels displaying only black or red, etc., are not a malfunction. They do not affect the images recorded.

If the LCD monitor is left on for a prolonged period, screen burn-in may occur where you see remnants of what was displayed. However, this is only temporarily and will disappear when the camera is left unused for a few days.

Memory Cards

Memory cards are precision devices. Do not drop the memory card or subject it to vibration. Doing so could damage the images recorded on them.

Do not store or use the memory card near anything having a strong magnetic field such as a TV set, speakers, or magnet. Also avoid places prone to having static electricity. Otherwise, the images recorded on the memory card might be lost.

Do not leave the memory card in direct sunlight or near a heat source. Doing so can warp the cards and make them unusable.

Do not spill any liquid onto the memory card.

Always store your memory cards in a case to protect the data stored on them.

Do not bend the card or subject it to any excessive force or physical shock.

Do not store the memory card in hot, dusty, or humid locations.

Lens Electrical Contacts

After detaching the lens from the camera, attach the lens caps or put down the lens with the rear end up to avoid scratching the lens surface and electrical contacts.

Contacts

Cautions for Prolonged Use

When you shoot continuously for a prolonged period or use Live View shooting for a long period, the camera may become hot. Although this is not a malfunction, holding the hot camera for a long period can cause slight skin burns.

13

Quick Start Guide

1

Insert the battery.

(p.29)

Take off the cap and insert a fullycharged battery.

2

Attach the lens.

(p.35)

Align the red dot.

3

Set the lens focus mode switch to <AF>.

(p.35)

4

5

Insert a memory card.

(p.32)

The left slot is for the CF card, and the right slot is for the SD card.

Set the power switch to <1>.

(p.36)

14

6

7

Quick Start Guide

Set the camera to the default settings.

(p.49)

On the menu screen under the [7] tab, select [Clear all camera settings].

• Press the <M> button and turn the <6> <5> dial to select it, then press <0>.

• The <d> Program AE mode will take effect.

Focus the subject.

(p.36)

Aim the Area AF over the subject and press the shutter button halfway to autofocus.

8

Take the picture.

(p.36)

Press the shutter button completely to take the picture.

9

View the image.

(p.129)

The captured image will be displayed for about 2 sec. on the LCD monitor.

Shooting will be possible with either a CF card or SD card is in the camera.

To view the images captured so far, see “Image Playback” (p.116).

To delete an image, see “Erasing Images” (p.128).

15

Nomenclature

Lens mount index (p.35)

Self-timer lamp (p.88)

Shutter button (p.36)

Strap mount

(p.24)

Mirror (p.104)

Lens lock pin

Lens release button (p.35)

Lens mount

Contacts

(p.13)

Grip

16

Depth-of-field preview button

(p.97)

Vertical-grip on/off switch (p.39)

 Vertical-grip FE lock/

Multi-spot metering button

(p.39, 105/91)

Vertical-grip Main Dial

(p.39, 37)

Hand strap mount

Vertical-grip shutter button

(p.39, 36)

Tripod socket

Body number

Body cap (p.35)

Nomenclature

 LCD panel illumination button (p.102)

Hot shoe

Flash-sync contacts

< V> Focal plane mark

< Q> Metering mode selection/Flash exposure compensation button (p.90/105)

< W> Shooting mode selection button

(p.92)

< o > AF mode selection/Drive mode selection button

(p.82, 87)

< Y> AEB set button

(p.100)

Strap mount

(p.24)

Dioptric adjustment knob (p.39)

Viewfinder eyepiece

Battery release handle (p.29, 30)

Battery (p.26)

Power/Quick Control

Dial switch (p.36)

< 0> Setting button (p.41)

< O> Exposure compensation/

Aperture button (p.99/98)

 FE lock/Multi-spot metering button (p.105/91)

 ISO speed set button (p.56)

< 6> Main Dial (p.37)

Top LCD panel (p.19)

 AF start button (p.82/83)

< A/y> AE lock/

Reduce button

(p.101/120, 146)

< S/u> AF point selection/

Magnify button

(p.84/112,

120, 146)

Eyepiece shutter lever

(p.103)

< 9> Multicontroller (p.38)

< 5> Quick

Control Dial (p.38)

< A/y> Verticalgrip AE lock/

Reduce button

(p.39, 101/120, 146)

<

S/u> Verticalgrip AF point selection/Magnify button (p.39, 84/

112, 120,146)

 Verticalgrip AF start button

(p.39, 82, 83)

17

Nomenclature

 Info/Trimming orientation button

(p.114, 116, 186/146)

<

M> Menu button (p.41)

WFT-E2/E2A mounting hole

Extension system terminal

Terminal cover

LCD Monitor (p.41, 129)

Eyecup (p.39)

SD card slot*

(p.32)

Memory card slot cover

(p.32)

CF card slot (p.32)

CF card eject button (p.33)

Access lamp (p.34)

<

< x> Playback button

(p.116)

L> Erase button (p.128)

Rear LCD Panel (p.20)

< D> PC terminal (p.108)

Memory card slot cover release handle (p.32)

Recording microphone (p.124)

< H> Protect/Sound recording button

(p.123/124)/

< A> Picture Style setting button (p.57)

 Function button (p.52, 63, 69, 73)

< F> Remote control terminal (N3 type) (p.103)

< q> VIDEO OUT terminal (p.122)

<

D> DIGITAL terminal (p.138, 152)

Battery compartment cap (p.29)

* In this manual, “SD card” refers to the SD memory card.

18

Nomenclature

Top LCD Panel

Shutter speed

Bulb (buLb)

Bulb exposure time (min.:sec.)

FE lock (FEL)

Busy (buSY)

Error (Err)

Sensor cleaning (CLn)

ISO speed

Highlight tone priority display

Dust Delete Data acquisition ( - - - -)

Shooting mode d : Program AE f : Aperture-priority AE a : Manual exposure s : Shutter-priority AE

ISO speed

Metering mode q Evaluative

metering w Partial metering r Spot metering e Center-weighted

average metering

Battery check z H m x bn

Flash exposure compensation

AEB

Mirror lockup

Aperture

AEB amount

Dust Delete Data acquisition ( - -)

AF point selection mode

[ ]

Recording media indicator (Card *)

AF point registration

- -

Shots remaining

Self-timer countdown

Bulb exposure time (Hours)

Recording media full (Full)

Error code

Remaining images to record

AF mode

X:

One-Shot AF

Z:

AI Servo AF

Exposure level scale

Drive modes u Single shooting o High-speed p Low-speed shooting k Self-timer (10 sec.) l Self-timer (2 sec.)

6 Silent single shooting

Exposure level indicator

Exposure compensation amount

Flash exposure compensation amount

The display will show only the settings currently applicable.

19

Nomenclature

Rear LCD Panel

External media selection icon* 3

SD card indicator

SD card selection icon

CF card indicator

CF card selection icon

External media connection icon* 3

White balance correction

White balance

Q Auto

W Daylight

E Shade

R Cloudy

Y Tungsten light

U White fluorescent light

I Flash

O Custom

P Color

Image size

3 Large

4 Medium1

5 Medium2

6 Small

1 RAW

9 Small RAW

Monochrome shooting

Wired LAN connection* 1

Wireless LAN connection* 1

Custom white balance acquisition display ([ * ])

File No.

Color temperature

Custom white balance number

Personal white balance number

Folder number

Recording media indicator

(Full, Err)

Data transfer icon* 2

*

*

*

1

2

3

:Displayed when Wireless File Transmitter WFT-E2/E2A is used.

:Displayed when the camera is connected to a personal computer.

:Displayed when the WFT-E2/E2A and external media are used.


20

Viewfinder Information

Center spot metering circle

Focusing screen

Nomenclature

Area AF ellipse

AF point

: Cross-type points

: Assist AF points

Exposure level indicator

Max. burst

< q> Metering mode

< q> Manual exposure

< w> AE lock in-progress

<

D> Flash-ready

Improper FE lock warning

< e> High-speed sync

(FP

< r> FE lock



JPEG icon

< 1>

RAW icon

< z> Battery check

< o> Focus confirmation light

ISO speed

Highlight tone priority display

 ISO speed icon

Shots remaining

Recording media full (Full)

AF point selection mode

- -

AF point registration

- -

Shutter speeds

Bulb (buLb)

FE lock

Busy (buSY)

Aperture

< y> Exposure compensation

Flash exposure compensation

 White balance correction


Standard exposure index

Exposure level scale

: 1 stop

: 1/3 stop

Overexposure

Flash overexposure

Exposure level

Flash exposure level

Flash underexposure

Underexposure

21

Nomenclature

Battery Pack LP-E4

Lock lever

Contacts

Handle end

Battery release handle Protective cover

Contact end

Battery Charger LC-E4

Charger for Battery Pack LP-E4. (p.26)

Charge level/Calibration (Discharge) status indicator/

Performance check lamp

Battery pack slot

Power cord socket

Protective covers (2)

22

Charge lamp

Calibration/Performance check button

Car battery cable socket

Power cord

Nomenclature

AC Adapter Kit ACK-E4

Powers the camera from a household power outlet. (p.31)

Power cord

Power cord socket

Protective cover

DC coupler

AC adapter

DC terminal

DC plug

23

Nomenclature

Attaching the Neck Strap and Hand Strap

Strap

Hand strap (optional)

1 2

4 5

3

Attach the strap

6

24

After attaching the strap, pull it at the buckle to take up the slack and to make sure it does not loosen.

Getting Started

This chapter explains preliminary steps and basic camera operations.

25

Recharging the Battery

1

Connect the charger to a power outlet.

Connect the power plug to a power outlet, and connect the power cord to the charger.

When no battery is attached, all the indicator lamps will be off.

2

Remove the protective covers from the charger and battery.

Remove the protective cover on the charger by sliding it out.

3

Recharge the battery.

Slide in the battery into the charger’s slot as shown by the arrow, and make sure it is securely attached. You can attach the battery to slot A or B.

X The Charge level indicator will light in green and charging will start.

X When the battery is fully charged, all three Charge level indicators will light (50%/80%/100%).

It takes about 2 hours to fully recharge a

completely exhausted battery. The time required to recharge the battery depends on the ambient temperature and battery’s charge level.

When two battery packs are attached to the charger, the battery attached first will be charged first, then the other battery will be charged.

26

The charger cannot charge any battery other than Battery Pack LP-E4.

Battery Pack LP-E4 is dedicated to Canon only. Using it with a non-Canon battery charger or product may result in malfunction or accidents for which Canon cannot be held liable.

For battery calibration (p.28), it is best to do it after the battery is nearly exhausted.

If you do the calibration with a fully charged battery, it will take about 12 hours to complete the calibration (power discharge) and the battery recharging (approx. 10 hours to discharge, and approx. 2 hours to fully recharge).

Recharging the Battery

Tips for Using the Battery and Charger

Recharge the battery on the day before or on the day it is to be used.

An unused charged battery will still gradually lose its power over time.

After recharging the battery, detach it and unplug the power cord from the power outlet.

When not using the battery and charger, attach the protective covers.

Use the battery in an ambient temperature range of 0°C - 40°C /

32°F - 104°F.

To attain best battery performance, an ambient temperature of 10°C

- 30°C / 50°F - 86°F is recommended. In cold locations such as snowy areas, battery performance and operation time may temporarily decrease.

When not using the camera, remove the battery.

If the battery is left in the camera for a prolonged period, a small amount of power current is released, resulting in excess discharge and shorter battery life. Take out the battery from the camera and attach the protective cover before storing. Storing the battery after it is fully charged can lower the battery’s performance.

The battery charger can also be used in foreign countries.

The battery charger is compatible with a 100 V AC to 240 V AC 50/

60 Hz power source. Use a commercially-available plug adapter for that country. Do not attach any portable voltage transformer to the battery charger. Doing so can damage the battery charger.

Check the battery performance.

While the battery is recharging, press the

<PERFORMANCE> button to check the battery’s performance level indicated by the

Charge level indicator.

(Green): Battery performance is fine.

(Green): Battery performance is slightly degraded.

(Red): Replacing the battery is recommended.

27

Recharging the Battery

The <CAL/CHARGE> lamp blinks in red.

This indicates that you should calibrate the battery so that the correct battery level is detected and the camera’s battery level indicator can display the correct battery level. Calibration is not a required operation. If you want to just recharge the battery, you can let the battery start recharging automatically after about 10 sec. If you want to do the calibration, press the

<CALIBRATE> button while the <CAL/CHARGE> lamp is blinking in red. The Charge level indicator will blink in red and the calibration (power discharge) will start.

After the calibration is completed, the battery will start recharging automatically. Note that the less depleted the battery, the longer the calibration will take. The <2h>, <4h>, and

<10h> figures on the side of the Charge level indicator respectively indicate the approximate number of hours it will take to complete the calibration (power discharge). If the <10h> indicator blinks in red, it will take approx. 10 hours. After the calibration is completed and the battery is totally drained, it will take a further 2 hours to recharge the battery fully. If you want to stop the calibration before it is completed and start recharging the battery, remove the battery from the charger and attach it to the charger again.

All three Charge level indicators blink.

If all three Charge level indicators blink in green, it means that the battery’s internal temperature is not within 0°C - 40°C / 32°F - 104°F. The battery will start recharging when the internal temperature is within 0°C - 40°C / 32°F - 104°F.

If all the Calibration (discharge) status indicators blink in red or if all the lamps blink between green and red (including the <CAL/CHARGE> lamp), remove the battery from the charger and take it to your dealer or to nearest Canon Service Center.

Also, if a battery other than the LP-E4 is attached to the charger, the lamps will blink between red and green (including the <CAL/CHARGE> lamp) and the battery cannot be recharged.

28

Use the car’s cigarette lighter socket to recharge the battery.

With Car Battery Cable CB-570 (optional), you can connect the charger’s car battery cable socket (<DC IN> terminal) to your car’s cigarette lighter socket.

• When recharging the battery this way, be sure that the car’s engine is on.

If the car engine is off, disconnect the car battery cable from the cigarette lighter socket. If you leave the car battery cable connected to the cigarette lighter socket, it may drain the car battery.

• Do not use a transformer with the battery charger.

• Battery charging from a car battery is possible only with a 12 V DC or

24 V DC car battery in a minus-grounded car. The shape or dimensions of the cigarette lighter socket in certain cars might not be compatible with the car battery cable.

Installing and Removing the Battery

Installing the Battery

Load a fully charged LP-E4 battery pack into the camera.

1

Remove the battery compartment cap.

Grasp both sides of the cap and pull it out.

2

Insert the battery.

Insert the battery firmly all the way, turn the release handle as shown by the arrow.

Checking the Battery Level

When the power switch is set to <1> (p.36), the battery level will be indicated in one of six levels:

Icon Level (%) Indication z 100 - 70 Sufficient battery level

H 69 - 50 Battery level exceeds 50% m 49 - 20 Battery level below 50% x 19 - 10 Battery level is low b 9 - 1 Battery will be exhausted soon n 0 Recharge the battery

Select the [6 Battery info.] menu to see the detailed battery information.

(p.187)

29

Installing and Removing the Battery

Battery Life

Temperature

Possible Shots

At 23°C / 73°F

Approx. 2200

At 0°C / 32°F

Approx. 1700

The figures above are based on a fully-charged LP-E4, no Live View shooting, and CIPA (Camera & Imaging Products Association) testing standards.

The actual number of shots may be fewer than indicated above depending on the shooting conditions.

Pressing the shutter button halfway for long periods or operating only the autofocus can also reduce the number of possible shots.

The number of possible shots will decrease with more frequent use of the LCD monitor.

For battery life when Live View shooting is used, see page 114.

Removing the Battery

1

Flip out the battery release handle and turn it as shown by the arrow.

2

Pull out the battery.

To prevent shorting, be sure to attach the protective cover to the battery.

When not using the camera, attach the battery compartment cap.

30

If the battery’s rubber lining (to repel water) is not clean, use a moist cotton swab to wipe it clean.

Rubber lining

Using a Household Power Outlet

With AC Adapter Kit ACK-E4, you can connect the camera to a household power outlet and not worry about the battery level.

1

Connect the DC plug.

Connect the DC Coupler’s plug to the

AC adapter’s DC terminal.

2

Connect the power cord.

Connect the power plug to the power outlet, then connect the power cord to the AC adapter.

3

Insert the DC Coupler.

Insert the coupler firmly all the way, turn the release handle as shown by the arrow.

Set the camera’s power switch to

<1>.

The DC Coupler is not water-resistant, so do not get it wet when using it outdoors.

Do not connect or disconnect the power cord or DC Coupler while the camera’s power switch is set to <1>.

31

Installing and Removing the Memory Card

The camera can use a CF card and SD card. Images can be recorded with at least one memory card installed in the camera.

If both card slots have a card, you can select which card to record images with or record the same images simultaneously on both cards.

(p.73)

If you use an SD card, be sure the write protect switch is set upward to enable writing/erasing.

Installing a Card

1

Open the cover.

Flip out and turn the cover release handle as shown by the arrow.

2

Insert the memory card.

The left slot is for the CF card, and the right slot is for the SD card.

With the CF card, face the label side toward you as shown in the diagram and insert the end with the small holes into the camera.

If the CF card is inserted in the wrong way, it may damage the camera.

X The CF card eject button will stick out.

With the SD card, insert it until it clicks into place.

3

Close the cover.

Press the cover until it snaps shut.

32

The camera can also use SDHC memory cards.

Installing and Removing the Memory Card

Memory card selection icon

CF card indicator

SD card indicator

4

Set the power switch to <1>.

X The number of possible shots will be displayed on the top LCD panel and in the viewfinder.

X The rear LCD panel will indicate which memory card(s) has been installed. The images will be recorded to the memory card with the < > arrow next to the respective card’s indicator.

The camera is compatible with both Type I and Type II CF cards which differ in thickness.

The number of possible shots varies depending on the memory card’s capacity, image-recording quality, ISO speed, etc.

The [2 Shoot w/o card] menu option set to [Off] will prevent you from forgetting to install a memory card.

Removing the Card

1

Open the cover.

Set the power switch to <2>.

Make sure the access lamp is off, then open the cover.

2

Take out the memory card.

To remove the CF card, push the eject button.

To remove the SD card, push it in and release it.

Close the cover.

33

Installing and Removing the Memory Card

The access lamp lights during any of the following operations: The image is being exposed, being written to or read by the memory card, being erased, or data is being transferred. While the access lamp is lit, never do any of the following. Doing so may damage the image data. It may also damage the memory card or camera.

• Opening the card slot cover.

• Removing the battery.

• Shaking or banging the camera around.

If the memory card already contains recorded images, the image number might not start from 0001. (p.79)

Compared to other memory cards, hard disk-type CF cards are more vulnerable to vibration and physical shock. If you use a such a card, be careful not to subject the camera to vibration or physical shock especially while recording or playing images.

Do not touch the SD card’s contacts with your fingers or metal objects.

If a memory card-related error is displayed, see page 48.

34

Mounting and Detaching a Lens

Mounting a Lens

1

Remove the caps.

Remove the rear lens cap and the body cap by turning them as shown by the arrow.

2

Attach the lens.

Align the red dots on the lens and camera and turn the lens as shown by the arrow until it snaps in place.

3

On the lens, set the focus mode

switch to <f>.

If it is set to <g>, autofocus will not be possible.

Detaching the Lens

4

Remove the front lens cap.

While pressing the lens release button, turn the lens as shown by the arrow.

Turn the lens until it stops, then detach it.

When attaching or detaching the lens, take care to prevent dust from entering the camera through the lens mount.

Not compatible with EF-S lenses.

35

Basic Operation

Power/Quick Control Dial Switch

<2> : The camera is turned off and does not operate. Position for when you do not use the camera.

<1> : The camera operates.

<J> : The camera and <5> dial operate. (p.38)

Whenever you set the power switch to <1/J> or <2>, the sensor cleaning will be executed automatically. During the sensor cleaning, the LCD monitor will display <f>.

To save battery power, the camera turns off automatically after about 1 minute of non-operation. To turn on the camera again, just press the shutter button.

You can change the auto power-off time with the menu’s [5 Auto

power off] setting. (p.47)

If you set the power switch to <2> while the image is being recorded to the memory card, [Recording ...] will be displayed and the power will turn off after the card finishes recording the image.

Shutter Button

The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely.

Pressing halfway

(9)

This activates autofocusing and automatic exposure that sets the shutter speed and aperture.

The exposure setting will be displayed on the top LCD panel and in the viewfinder.

Pressing completely

This releases the shutter and takes the picture.

36

Basic Operation

If you press the shutter button completely without pressing it halfway first or if you press the shutter button halfway and then press it completely immediately, the camera will take a moment before it takes the picture.

Even during the menu display, image playback, and image recording, you can instantly go back to shooting-ready by pressing the shutter button halfway.

<

6

> Using the Main Dial for Selecting

(1) After pressing a button, turn the

<6> dial.

When you press a button, its function remains selected for 6 seconds (9).

During this time, you can turn the <6> dial to set the desired setting.

When the function turns off or if you press the shutter button halfway, the camera will be ready to shoot.

Use the dial to select or set the shooting mode, AF mode, metering mode, AF point, ISO speed, exposure compensation when the <O> button is pressed, or memory card.

(2) Turn the <6> dial only.

While looking at the viewfinder or top

LCD panel, turn the <6> dial to set the desired setting.

In this way, you can set the shutter speed, aperture, etc.

37

Basic Operation

<

5

> Using the Quick Control Dial for Selecting

Before using the < 5 > dial, set the power switch to <J>.

(1) After pressing a button, turn the

<5> dial.

When you press a button, its function remains selected for 6 seconds (9).

During this time, you can turn the < 5 > dial to set the desired setting. When the function turns off or if you press the shutter button halfway, the camera will be ready to shoot.

Use the dial to select or set the shooting mode, drive mode, flash exposure compensation, AF point, ISO speed, exposure compensation when the < O > button is pressed, white balance, or image recording size.

(2) Turn the <5> dial only.


LCD panel, turn the < 5 > dial to set the desired setting.

Use this dial to set the exposure compensation amount and the aperture setting for manual exposures.

You can also operate (1) when the power switch is set to <1>.

<

9

> Operating the Multi-controller

The < 9 > consists of eight direction keys and a button at the center.

Use it to select the center AF point, correcting white balance, select focusing frame during Live View shooting, or scroll the image during magnified view.

38

Basic Operation

Vertical Shooting

The bottom of the camera provides a shutter button, <6> Main Dial,

<S> AF point selection button, <A> AE Lock button, AF

Start button, and FE lock/Multi-spot metering button all for vertical shooting.

Before using the vertical shooting controls, set the vertical operation on/ off switch to <1>.

When not using the vertical shooting controls, set the switch to <2> to prevent accidental operation.

Adjusting the Viewfinder Clarity

1

Remove the eyecup.

While grasping both sides of the eyecup, slide it upward to remove.

2

Turn the dioptric adjustment knob.

Turn the knob to the right or left until the AF points or the center spot metering circle looks sharp in the viewfinder.

Attach the eyecup.

If the camera’s dioptric adjustment still cannot provide a sharp viewfinder image, using Dioptric Adjustment Lens Eg (optional) is recommended.

39

Basic Operation

Holding the Camera

To obtain sharp images, hold the camera still to minimize camera shake.

Horizontal shooting Vertical shooting

1. Wrap your right hand around the camera grip firmly.

2. Hold the lens bottom with your left hand.

3. Press the shutter button lightly with your right hand’s index finger.

4. Press your arms and elbows lightly against the front of your body.

5. Press the camera against your face and look through the viewfinder.

6. To maintain a stable stance, place one foot in front of the other.

40

Menu Operations

By setting various optional settings with the menus, you can set the

Picture Style, date/time, Custom Functions, etc. While looking at the

LCD monitor, you use the <M> button on the camera back and the

<6> < 5 > dials.

<M> button

LCD monitor

4 Playback 2

3 Playback 1

2 Shooting 2

1 Shooting 1

Tab

<6> Main Dial

<5> Quick

Control Dial

<0> button

5 Set-up 1

6 Set-up 2

7 Set-up 3

8 Custom Functions

9 My Menu

Menu items Menu settings

Icon

1/2

3/4 Blue Playback menus Image playback-related items

5/6/7 Yellow Set-up menus Camera’s function settings

8

9

Color Category Description

Red Shooting menu Shooting-related items

Orange Camera’s Custom Functions

Green Register frequently-used menu items and Custom Functions

41

Menu Operations

Menu Setting Procedure

1

Display the menu.

Press the <M> button to display the menu.

2

Select a tab.

Turn the < 6 > dial to select a tab.

3

Select a menu item.

Turn the < 5 > dial to select the menu item, then press < 0 >.

4

Select the setting.

Turn the < 5 > dial to select the desired setting.

5

Set the desired setting.

Press < 0 > to set it.

6

Exit the menu.

Press the <M> button to exit the menu and return to camera shooting.

42

You can also use <9> to select the tab and menu item. (Works only with the menu’s top layer items.)

Menu Operations

Menu Settings

1 Shooting 1 (Red)

White balance

Custom WB regist.

WB SHIFT/BKT

Color space

Picture Style

Page

Q / W / E / R / Y / U / I / O (1 - 5) /

P (2500 - 10000) / PC-1 - 5

Manual registration of white balance data

WB correction: B/A/M/G bias, 9 levels each

WB-BKT: B/A and M/G bias, single-level increments, ±3 levels sRGB / Adobe RGB

Standard / Portrait / Landscape / Neutral /

Faithful / Monochrome / User Def. 1, 2, 3

63

64

70

71

72

57-62

2 Shooting 2 (Red)

JPEG quality

Image size

Review time

Beep

Shoot w/o card

Dust Delete Data

Compression rate for 3, 4, 5, 6

3 / 4 / 5 / 6 / 1 / 1+3 / 1+4 /

1 +5 / 1+6 / 9 / 9+3 / 9+4 /

9 +5 / 9+6 ( →p.45 )

Off / 2 sec. / 4 sec. / 8 sec. / Hold

On / Off

On / Off

Obtain dust-mapping data to eliminate dust spots with bundled software

55

52

129

-

33

133

3 Playback 1 (Blue)

Protect images

Rotate

Erase images

Print order

Transfer order

Image copy

External media backup

Erase-protect image

Rotate vertical image

Erase image

Specifies images to be printed (DPOF)

Select images to be transferred to a personal computer

Copy images between memory cards

Displayed when external media is used via

WFT-E2/E2A (optional)

123

121

128

147

154

125

-

43

Menu Operations

4 Playback 2 (Blue)

Highlight alert

AF point disp.

Histogram

Enlarge display

Image jump w/6

5 Set-up 1 (Yellow)

Auto power off

Record func+media/ folder sel.

File numbering

File name setting

Auto rotate

Format

6 Set-up 2 (Yellow)

LCD brightness

Date/Time

Disabled / Enabled

Disabled / Enabled

Brightness / RGB

Enlarge from image center / Enlarge from selected AF point

1 image / 10 images / 100 images / Screen /

Date / Folder

Page

118

118

118

120

119

1min. / 2 min. / 4 min. / 8 min. / 15 min. /

30 min. / Off

[Record func.] Standard / Auto switch media /

Rec. separately / Rec. to multiple

[Record/play] f / g / u

[Folder] Creating and selecting a folder

Continuous / Auto reset / Manual reset

File name (unique setting) / User setting 1 /

User setting 2

On zD / On D / Off

Initialize and erase data in the card

47

74

73

75

79

77

130

47

Language

Video system

Battery info.

Live View function settings

External Speedlite control

Seven brightness levels provided

Set the date (year, month, day) and time (hour, min., sec.)

18 languages provided (English, German,

French, Dutch, Danish, Portuguese, Finnish,

Italian, Norwegian, Swedish, Spanish, Greek,

Russian, Polish, Simplified Chinese,

Traditional Chinese, Korean, and Japanese)

NTSC / PAL

Detailed battery information

[Live View shoot.] Disable / Enable

[Grid display] Off / On

Flash function settings / Flash C.Fn settings /

Clear all Speedlite C.Fn’s

129

46

46

122

187

110

114

106

44

Menu Operations

7 Set-up 3 (Yellow)

Save/load settings on media

Save / Load

Regist/apply basic settings

Register / Apply

Clear all camera settings Resets the camera to the default settings

Sensor cleaning

Firmware Ver.

WFT settings

Auto cleaning / Clean now / Clean manually

For updating the firmware

Displayed when WFT-E2/E2A (optional) is attached

8 Custom Functions (Orange)

C.Fn I: Exposure

C.Fn II:

Image/Flash exp/Disp

C.Fn III:

Auto focus/Drive

C.Fn IV:

Operation/Others

Clear all Custom Func.

(C.Fn)

C.Fn setting register/ apply

Customize the camera as desired

Clears all Custom Function settings

Custom Function settings are registered in and applied to the camera

9 My Menu (Green)

My Menu settings

Register frequently-used menu items and

Custom Functions

Page

182

184

49

131

-

-

158

163

166

173

156

179

181

What is displayed by [2 Image size] depends on the [Record func.] setting under [5 Record func+media/folder sel.]. If [Record func.] is set to [Rec. separately], select the image size for the respective memory card. (1+ JPEG and 9+JPEG cannot be displayed.)

Even while the menu is displayed, you can instantly go back to shooting by pressing the shutter button halfway.

The explanation of menu functions hereinafter assumes that you have pressed the <M> button to display the menu screen.

You can register frequently-used menu items under My Menu <9>.

(p.181)

45

Before You Start

3 Setting the Interface Language

1

Select [Language].

Under the [6] tab, select

[Language] (the third item from the top), then press <0>.

2

Set the desired language.

Turn the <5> dial to select the language, then press <0>.

X The language will change.

3 Setting the Date and Time

Check if the camera’s date and time are set correctly. If necessary, set the correct date and time.

1

Select [Date/Time].

Under the [6] tab, select [Date/

Time], then press <0>.

2

Set the date, time and date display format.

Turn the <5> dial to select the number.

Press <0> so is displayed.

Turn the <5> dial to select the desired setting, then press <0>.

(Returns to .)

3

Exit the menu.

Turn the <5> dial to select [OK], then press <0>.

X The date/time will be set and the menu will reappear.

46

It is important to set the correct date/time because it will be recorded together with each captured image.

Before You Start

3 Set the power-off time/Auto power off

To save battery power, the camera turns off automatically after about 1 minute of non-operation.

You can change this auto power-off time for the camera to turn off automatically after non-operation. If you do not want the camera to turn off automatically, set this to [Off]. After the power turns off, you can turn on the camera again by pressing the shutter button or other button.

1

2

Select [Auto power off].

Under the [5] tab, select [Auto

power off], then press <0>.

Set the desired time.

Turn the <5> dial to select the item, then press <0>.

Even if [Off] has been set, the LCD monitor will turn off automatically after

30 min. to save power. (The camera’s power will not turn off.)

3 Formatting the Memory Card

If the memory card is new or was previously formatted by another camera or personal computer, format the card with the camera.

When the memory card is formatted, all images and data in the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images to a personal computer, etc., before formatting the card.

1

Select [Format].

Under the [5] tab, select [Format], then press <0>.

47

Before You Start

2

Select the memory card.

[f] is the CF card, and [g] is the SD card.

Turn the <5> dial to select the card, then press <0>.

3

Select [OK].

When [g] is selected, low-level formatting is possible. (p.49)


X The memory card will be formatted.

X When the formatting is completed, the menu will reappear.

When the memory card is formatted or erased, only the file management information is changed. The actual data is not completely erased. Be aware of this when selling or discarding the card.

When discarding the memory card, destroy the card physically to prevent personal data from being leaked.

If a memory card-related error message is displayed on the LCD monitor, remove and reinstall the card. If the error persists, use a different card.

If you can transfer all the images in the card to a personal computer, transfer all the images and then format the card. The card may then return to normal.

48

The memory card capacity displayed on the card format screen might be smaller than the capacity indicated on the card.

Before You Start

About Low-level Formatting

When [g] SD card is selected, low-level formatting is possible. If the writing speed to the SD card is slower than usual or if you want to completely erase the data in the SD card, checkmark [Low level

format] and format the card.

Press the <L> button.

In step 3 on the preceding page, press the <L> button.

X The [Low level format] option will be checkmarked <X>.

With <X> displayed, select [OK] to start the low-level formatting.

Since low-level formatting will erase all recordable sectors in the SD card, the formatting will take slightly longer than normal formatting.

You can stop the low-level formatting by selecting [Cancel]. Even in this case, normal formatting will have been completed and you can use the

SD card as usual.

3 Reverting Camera Settings to the Default

The camera’s shooting settings and menu settings can be reverted to the default.

1

Select [Clear all camera settings].

Under the [7] tab, select [Clear all

camera settings], then press <0>.

49

Before You Start

2

Select [OK].


X The camera’s default settings will be as shown below.

Shooting Settings

Shooting mode P (Program AE)

AF mode One-Shot AF

AF point selection Automatic selection

Metering mode Evaluative metering

Drive mode Single shooting

Exposure compensation

AEB

0 (Zero)

Canceled

Flash exposure compensation

0 (Zero)

Live View shoot. Disable

Grid display Off

Custom Functions No changes

Image-Recording Settings

Record func.

Image size

JPEG quality

ISO speed

Picture Style

Color space

White balance

Standard

L (Large)

8

100

Standard sRGB

AWB (Auto)

WB correction

WB-BKT

Canceled

Canceled

File numbering Continuous

File name setting Preset code

Auto cleaning

Dust Delete Data

Enable

Erased

Camera Settings Camera Settings

Auto power off

Beep

Shoot w/o card

Review time

Highlight alert

AF point disp.

Histogram

Enlarge display

1 min.

On

On

2 sec.

Disable

Disable

Brightness

Center

Image jump w/6 10 images

Auto rotate On zD

LCD brightness

Date/Time No changes

Language

Video system

No changes

No changes

My Menu settings No changes

50

Image Settings

This chapter explains the settings for shooting digital images: Image-recording quality, ISO speed, Picture

Styles, white balance, and color space.

When the camera is ready to shoot, you can press the button to see the image settings. (p.186)

51

Setting the Image-recording Quality

You can set the image size (recorded pixels), image type (JPEG, RAW, sRAW), and JPEG quality (compression rate).

Selecting the Image Size

3 /4/5/6 will record the image in the JPEG. In the 1/9 mode, the image will require processing with the software provided. 9 is a small RAW image which is one-fourth (approx. 2.5 megapixels) the size of a normal RAW image.

Also, RAW/sRAW and JPEG images can be recorded at the same time on the memory card.

1

Press the <B> button.

(9)

Press the button once or twice to display the card and image size on the rear LCD panel.

Image size/Card z WB

2

Select the image size.

Turn the <5> dial to select the image size.

If 1 or 9 and 3/4/5/6 are displayed at the same time, the RAW or sRAW and JPEG image will be recorded simultaneously on the card.

Turn the <6> dial to select the card to record or playback images. (p.73)

Image Size Guide

Image size

3 (Large)

4 (Medium1)

JPEG

5 (Medium2)

6 (Small)

1 (RAW)

9 (Small RAW)

52

Pixels Print Size

Approx. 10.1 megapixels (3888x2592) A3 or larger

Approx. 8.0 megapixels (3456x2304) Around A3



Approx. 10.1 megapixels (3888x2592) A3 or larger


Setting the Image-recording Quality

You can also use the [2 Image size] menu to set the image size.

For simultaneous image recording, the RAW or sRAW image and the

JPEG image will be recorded with the same file number in the same folder.

If the [5 Record func+media/folder sel.] menu’s [Record func.] is set to [Rec. separately], you can set the image size (except for 1+JPEG and 9+JPEG) for the respective card.

In accordance with the selected image size, the or <1> icon will be displayed on the right side in the viewfinder. If 9 has been selected, <1> will be displayed.

3

4

5

6

1

1 +3

1 +4

1 +5

1 +6

9

9 +3

9 +4

9 +5

9 +6

Image Size and Memory Card Capacity

Image size

File Size

(Approx. MB)

3.5

2.8

2.1

1.2

13.0

13.0 + 3.5

13.0 + 2.8

13.0 + 2.1

13.0 + 1.2

7.6

7.6 + 3.5

7.6 + 2.8

7.6 + 2.1

7.6 + 1.2

Possible Shots

(Approx.)

260

320

420

710

66

52

54

56

60

110

76

81

87

95

Maximum burst (Approx.) o High-speed p Low-speed

110

130

140

260

320

420

160

30

22

710

35

27

28

28

28

28

22

22

22

46

27

27

27

70

35

35

35

35

The number of possible shots and maximum burst apply to a 1GB CF card based on Canon’s testing standards.

The single image size, number of possible shots, and maximum burst during continuous shooting are based on Canon’s testing standards (JPEG quality: 8,

ISO 100, Picture Style: Standard).

Check the viewfinder or top LCD panel for the current number of possible shots.

The single image size and number of possible shots will vary depending on the subject, memory card brands, ISO speed, Picture Style, etc.

In the case of monochrome images, the file size will be smaller so the number of possible shots will be higher.

53


About RAW

The RAW image is the data output by the imaging element and converted to digital data which is recorded on the memory card as is.

The RAW image is transferred to a personal computer where software

(provided) is used to adjust the image as needed. From the RAW image, the software can develop and generate the adjusted image in the desired type such as JPEG or TIFF.

About sRAW

This is a small RAW image which is one-fourth (approx. 2.5 megapixels) the size of a normal RAW image. As with RAW images, sRAW images can be developed and adjusted with the provided software. This image type is handy when you do not need a very high resolution as a normal RAW image.

Maximum Burst During Continuous Shooting

The maximum burst will vary depending on the subject, memory card brands, image-recording quality (image size and

JPEG quality), ISO speed, drive mode,

Picture Style etc. The preceding page lists the approximate maximum burst for each image size. You can check the current maximum burst displayed in the viewfinder on the right side.

At high ISO speeds, the maximum burst will greatly decrease.

The maximum burst is displayed even when a memory card is not in the camera. Make sure that a memory card is loaded before taking a picture.

The maximum burst for <o> is displayed regardless of the drive mode setting.

54

If the viewfinder displays “99” for the maximum burst, it means the maximum burst is 99 or higher. If 98 or lower is displayed, the maximum burst is 98 or lower. If you stop the continuous shooting, the maximum burst will increase.

After all the captured images are written to the memory card, the maximum burst will be as listed on the preceding page.


3 Setting the JPEG Quality (Compression Rate)

The image-recording quality (compression rate) can be set for each image size 3/4/5/6.

1

Select [JPEG quality].

Under the [2] tab, select [JPEG

quality], then press <0>.

2

Select the image size.

Turn the <5> dial to select the image size, then press <0>.

3

Set the desired quality

(compression rate).

Turn the <5> dial to select setting, then press <0>.

The higher the number, the higher the quality will be (lower compression).

For 6 - 10, is displayed. For 1 -

5, <o> is displayed.

The higher the image-recording quality, the fewer the number of possible shots will be. On the other hand, the lower the image-recording quality, the higher the number of possible shots will be.

55

Z : Setting the ISO Speed

The ISO speed is a numeric indication of the sensitivity to light. A higher

ISO speed number indicates a higher sensitivity to light. Therefore, a high ISO speed is suited for low light and moving subjects. However, the image may look more coarse with noise, etc. On the other hand, a low ISO speed is not suited for low light or action shots, but the image will look finer.

The camera can be set between ISO 100 and 3200 in 1/3-stop increments.

1

Press the <Z> button.

(9)

X The current ISO speed will be displayed on the top LCD panel and in the viewfinder.

2

Set the ISO speed.

Turn the <6/5> dial to set the ISO speed.

Using a high ISO speed or shooting in high-temperature conditions may result in more grainy images.

High temperatures, high ISO speeds, or long exposures may cause irregular colors in the image.

56

With C.Fn I -3 [Set ISO speed range], the ISO speed range can be extended to ISO 50 (L) to 6400 (H). (p.158)

A Selecting a Picture Style

By selecting a Picture Style, you can obtain the desired image effects matching your photographic expression or the subject.

1

Press the <A> button.

When the camera is ready to shoot, press the <A> button.

X The Picture Style screen will appear.

2

Select a Picture Style.

Turn the <5> dial to select a Picture

Style, then press <0>.

X The Picture Style will take effect and the camera will be ready to shoot.

You can also use the [1 Picture Style] menu to select the Picture Style.

Picture Style Effects

Standard

The image looks vivid and sharp.

Portrait

For nice skin tones. The image looks slightly sharp.

Landscape

For vivid blues and greens, and very sharp images.

Neutral

For natural colors and subdued images. This Picture Style assumes that you will do post-processing with a personal computer.

Faithful

The image is dull and subdued. When the subject is captured under a color temperature of 5200K, the color is adjusted colorimetrically to match the subject’s color. This Picture Style assumes that you will do post-processing with a personal computer.

57

A Selecting a Picture Style

Monochrome

For black-and-white images.

To obtain natural-looking, black-and-white images, set a suitable white balance.

With JPEG 3/4/5/6 images, color cannot be restored to the black-and-white image. Do not use this Picture Style if you want color

JPEG images. When [Monochrome] is selected, <0> will appear on the rear LCD panel.

User Def. 1-3

You can select a base Picture Style such as [Portrait] or

[Landscape], adjust its parameters as desired and register it under

[User Def. 1] to [User Def. 3]. Any User Defined Picture Style which has not been set will have the same settings as the Standard Picture

Style.

About the Symbols

The symbols on the upper right of the Picture Style selection screen refer to parameters such as [Sharpness] and [Contrast]. The numerals indicate the parameters settings, such as [Sharpness] and [Contrast], for each Picture Style.

Symbols g Sharpness h Contrast i Saturation j Color tone k Filter effect (Monochrome) l Toning effect (Monochrome)

58

A Customizing the Picture Style

You can customize the Picture Style by adjusting the individual parameters like [Sharpness] and [Contrast]. To customize

[Monochrome], see the next page.

1


2

Select a Picture Style.

Turn the <5> dial to select a Picture

Style, then press the button.

3

Select a parameter.

Turn the <5> dial to select a parameter, then press <0>.

4

Set the parameter.

Turn the <5> dial to set the parameter as desired, then press

<0>.

Press the <M> button to save the adjusted parameter. The Picture

Style selection screen will reappear.

X Any settings different from the default will be displayed in blue.

Parameter Settings and Effects g Sharpness h Contrast i Saturation j Color tone

[0] : Less sharp outline

[-4] : Low contrast

[-4] : Low saturation

[-4] : Reddish skin tone

[+7] : Sharp outline

[+4] : High contrast

[+4] : High saturation

[+4] : Yellowish skin tone

59

A Customizing the Picture Style

By selecting [Default set.] in step 3, you can revert the respective

Picture Style to its default parameters.

To shoot with the Picture Style you modified, follow step 2 on the preceding page to select the Picture Style and then shoot.

Monochrome Adjustment

For Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast].

[Filter effect]

With a Filter effect applied to a monochrome image, you can make white clouds or green trees stand out more.

Filter

N: None

Ye: Yellow The blue sky will look more natural, and the white clouds will look crisper.

Or: Orange The blue sky will look slightly darker. The sunset will look more brilliant.

R: Red

Sample effects

Normal black-and-white image with no filter effects.

G: Green

The blue sky will look quite dark. Fall leaves will look crisper and brighter.

Skin tones and lips will look fine. Tree leaves will look crisper and brighter.

Setting the [Contrast] to the plus side will make the filter effect more pronounced.

[Toning effect]

By applying a toning effect, you can create a monochrome image in that color. It can make the image look more impressive.

The following can be selected: [N:None]

[S:Sepia] [B:Blue] [P:Purple] [G:Green].

60

A Registering the Picture Style

You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1],

[User Def. 2], or [User Def. 3]. You can create Picture Styles whose parameters such as sharpness and contrast are different. You can also select a Picture Style already set with the provided software.

1


2

Select [User Def.].

Turn the <5> dial to select [User

Def. *], then press the button.

3

Press <0>.

With [Picture Style] selected, press

<0>.

4

Select the base Picture Style.

Turn the <5> dial to select the base

Picture Style, then press <0>.

If you already have a Picture Style set with the provided software, select it here.

5

Select a parameter.

Turn the <5> dial to select a parameter, then press <0>.

61

A Registering the Picture Style

6

Set the parameter.

Turn the <5> dial to set the parameter as desired, then press

<0>.

Press the <M> button to register the new Picture Style. The Picture

Style selection screen will then reappear.

X The base Picture Style will be displayed on the right of [User Def. *].

X The name of the Picture Style having any modified settings (different from the default) registered under [User

Def. *] will be displayed in blue.

If a Picture Style has already been registered under [User Def. *], changing the base Picture Style in step 4 will nullify the parameters of the registered contents of the Picture Style.

62

To shoot with the registered Picture Style, follow step 2 for selecting [User

Def. *] on the preceding page.

Selecting the White Balance

White balance (WB) is for making the white areas look white. Normally, the <Q> (Auto) setting will obtain the correct white balance. If naturallooking colors cannot be obtained with <Q>, you can set the white balance manually to suit the respective light source.

1


(9)

Press the button once or twice to display the white balance on the rear LCD panel’s upper right.

WB z Card/Image size

2

Select the white balance.

Turn the <5> dial to select the white balance.

Icon

Q Auto

W Daylight

E Shade

R

Y

U

I

Mode

Cloudy, twilight, sunset

Tungsten light

White fluorescent light

Flash

O Custom (p.64)

P Color temperature (p.69)

Color temperature (Approx. K)

3000 - 7000

5200

7000

6000

3200

4000

6000

2000 - 10000

2500 - 10000

About White Balance

To the human eye, a white object looks white regardless of the type of lighting. With a digital camera, the color temperature is adjusted with software to make the white areas look white. This adjustment serves as the basis for the color correction. The result is natural-looking colors in the pictures.

You can also use the [1 White balance] menu to set the white balance.

To set Personal white balance, go to the [1 White balance] menu and select

[PC *]. To save the Personal WB to the camera, use the provided software. If no

Personal WB has been registered, the menu will not be displayed.

63

3

Custom White Balance

Custom white balance enables you to manually set the white balance for a specific light source for better accuracy. Up to five Custom white balance data can be registered to the camera. You can also append a name (caption) to the registered Custom white balance data.

Registering Custom WB

There are two ways to register Custom white balance data. You can either take a picture and register it, or register an image already saved in the memory card.

[Record and register image]

1

Select [Custom WB regist.].

Under the [1] tab, select [Custom

WB regist.], then press <0>.

2

Select the Custom WB No. to be registered.

Press <0>.

Turn the <5> dial to select 1 to 5 for

<O*>, then press <0>. The

Custom WB data will be registered under the selected No.

3

Select [Record and register image].

Turn the <5> dial to select [Record

and register image], then press

<0>.

X The LCD monitor will turn off, and the selected No. [ * ] will blink on the rear

LCD panel.

64

3 Custom White Balance

4

Photograph a solid-white object.

The plain, white object should fill the center spot metering circle.

Set the lens focus mode switch to

<g>, then focus manually. (p.86)

Shoot the white object so that a standard exposure (gray) is obtained.

If it is underexposed or overexposed, a correct white balance setting might not be obtained.

X The Custom WB data will be registered in the camera. When it is completed, a message will appear on the screen.

To use the Custom WB, see

“Selecting and Shooting with the

Custom WB data” (p.67).

A Custom WB data can also be registered as follows:

1. Press the button and turn the <5> dial to select <O>.

(p.63)

2. Then turn the <6> dial to select the No. under which the Custom

WB is to be registered.

3. Press the <A> button.

→ [ * ] will blink on the rear LCD panel.

4. Follow step 4 above to photograph a solid-white object.

→ The Custom WB will be registered under the selected No. and a completion message will appear on the screen.

When a picture is taken, the registered Custom white balance will be applied. (This registration method does not require the “Selecting and

Shooting with the Custom WB data” step on page 67.)

If [Correct WB may not be obtained with the selected image] is displayed in step 4, go back to step 1 and try again.

The captured image will not be recorded to the memory card.

65


[Register image on card]

First follow step 4 under [Record and register image] to take a picture of a plain, white object. This image saved in the memory

card can then be registered for Custom WB. The procedure up to step 2 is the same as with [Record and register image].

1

Select [Custom WB regist.].

2

Select the Custom WB No. to be registered.

3

Select [Register image on card].

Turn the <5> dial to select [Register

image on card], then press <0>.

X The images saved in the memory card will be displayed.

4

Select the image to be used for registrating the Custom WB data.

You can also display a four- or nineimage index by pressing the <y> button.

Turn the <5> dial to select the image to be registered for the Custom

WB data, then press <0>.

5

Select [OK].


X The Custom WB data will be registered, and a message will be displayed. Press

<0> to return to step 3.

To use the registered Custom WB data, see “Selecting and Shooting with the Custom WB data” (p.67).

66


Selecting and Shooting with the Custom WB data

You can shoot with the registered Custom WB data.

Registered images 1

Select the registered Custom WB

No.

On the Custom WB registration screen, select the No. of the registered Custom WB.

2

Select [Set as white balance].

Turn the <5> dial to select [Set as

white balance], then press <0>.

X The WB will be set to the registered

<O*>.

3


X The picture will be taken with the

<O*> setting.

You can also select the Custom WB No. while looking at the rear LCD panel.

Press the button and turn the <5> dial to select <O>. Then turn the <6> dial to select the registered Custom WB No.

Naming the Custom WB data

You can append a name (caption) to up to five Custom WB data registered with [Record and register image] or [Register image on card].

1

Select the Custom WB No.

On the Custom WB data registration screen, select the Custom WB No. to be appended with a name.

67


2

Select [Edit caption].

Turn the <5> dial to select [Edit

caption], then press <0>.

3

Enter any name.

Press the <H> button, and the text palette will be highlighted in a color frame and text can be entered.

Operate the <5> dial or <9> to move the and select the desired character. Then press <0> to enter it. You can enter up to 20 characters.

To change the name, first delete the unnecessary characters. Operate the

<5> dial or <9> to move the cursor to the right of the character to be deleted. Then press the <L> button to delete the character.

After entering the name, press the

<M> button.

X The name will be saved and the screen will return to step 2. The entered name will be displayed below

<O*>.

68

Entering a name which indicates the Custom WB’s place or light source type makes it convenient.

Setting the Color Temperature

You can numerically set the white balance’s color temperature.

1


(9)

Press the button once or twice to display the white balance on the rear LCD panel’s upper right.

WB z Card/Image size

2

Select <P>.

Turn the <5> dial to select .

3

Set the desired value.

Turn the <6> dial to set the color temperature.

You can set it within 2500K to 10000K in 100K increments.

When setting the color temperature for an artificial light source, set white balance correction (magenta or green) as necessary.

If you want to set to the reading taken with a commerciallyavailable color temperature meter, take test shots and adjust the setting to compensate for the difference between the color temperature meter’s reading and the camera’s color temperature reading.

You can also use the [1 White balance] menu to set the white balance.

69

3

White Balance Correction

You can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels.

Users familiar with using color temperature conversion or color compensating filters will find this feature handy.

White Balance Correction

1

Select [WB SHIFT/BKT].

Under the [1] tab, select [WB

SHIFT/BKT], then press <0>.

Sample setting : A2, G1

2

Set the white balance correction.

Use <9> to move the “ ” mark to the desired position.

B is for blue, A is amber, M is magenta, and G is green. The color in the respective direction will be corrected.

On the upper right, “SHIFT” indicates the direction and correction amount.

To cancel the white balance correction, move the “ ” to the center so that the “SHIFT” is “0, 0”.

Press <0> to exit and return to the menu.

70

During the white balance correction, will be displayed in the viewfinder and on the rear LCD panel.

One level of the blue/amber correction is equivalent to 5 mireds of a color temperature conversion filter. (Mired: A measurement unit indicating the density of a color temperature conversion filter.)

3 White Balance Correction

White Balance Auto Bracketing

With just one shot, three images having a different color tone can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias or magenta/green bias. This is called white balance bracketing

(WB-BKT). White balance bracketing is possible up to ±3 levels in single-level increments.

B/A bias ±3 levels

Set the white balance bracketing amount.

In step 2 for white balance correction, when you turn the <5> dial, the “ ” mark on the screen will change to “ ”

(3 points). Turning the dial to the right sets the B/A bracketing, and turning it to the left sets the M/G bracketing.

X On the right side of the screen, “BKT” indicates the bracketing direction and the bracketing amount is also displayed.

Press <0> to exit and return to the menu.

To cancel the bracketing, set “BKT” to

“±0” (“ ” becomes “ ” (1 point)).

Bracketing Sequence

Correct white balance, blue (B) bias, and amber (A) bias. Or, correct white balance, magenta (M) bias, and green (G) bias.

During WB bracketing, the maximum burst for continuous shooting will be lower and the number of possible shots will also decrease to one-third the normal number. Also, the white balance icon will blink on the rear LCD panel.

You can also set white balance correction and AEB together with white balance bracketing. If you set AEB in combination with white balance bracketing, a total of nine images will be recorded for a single shot.

Since three images are recorded for one shot, the memory card will take longer to record the shot.

“BKT” stands for Bracketing.

71

3

Setting the Color Space

The color space refers to the range of reproducible colors. With this camera, you can set the color space for captured images to sRGB or

Adobe RGB. For normal images, sRGB is recommended.

1

Select [Color space].

Under the [1] tab, select [Color

space], then press <0>.

2

Set the desired color space.

Select [sRGB] or [Adobe RGB], then press <0>.

About Adobe RGB

This is mainly used for commercial printing and other industrial uses.

This setting is not recommended if you do not know about image processing, Adobe RGB, and Design rule for Camera File System 2.0

(Exif 2.21). Since the image will look very subdued with sRGB personal computer environment and printers not compatible with Design rule for

Camera File System 2.0 (Exif 2.21), post-processing of the image with software will be required.

72

If the captured image was shot in the Adobe RGB color space, the first character in the file name will be an underscore “_”.

The ICC profile is not appended. The ICC profile is explained in the

Software Instruction Manual (CD-ROM).

Selecting the Media, Folder, and Recording Method

This Instruction Manual assumes that a CF card or SD card is in the camera. When an external media is used via the

Wireless File Transmitter WFT-E2/E2A (optional), the <u> icon will appear as the third recording media. It can be selected in

the same way as with the CF card <f> and SD card <g>.

Selecting a Memory Card

If only the CF card <f> or SD card <g> is in the camera, the memory card for recording will be selected automatically. If both the CF and SD cards are in the camera, you can select the card for recording images as follows:

1


(9)

Press the button once or twice to display the memory card and image size on the rear LCD panel’s left.

Card/Image size z WB

2

Select the memory card.

Turn the <6> dial to select the memory card for recording images.

A : Record to CF card

S

: Record to SD card

Turn the <5> dial to select the image size. (p.52)

If the recording method (p.74) has been set to [Rec. separately] [Rec. to

multiple], the image will be recorded to both the CF and SD cards. The selection will then specify which card to playback the images.

You can also use the [5 Record func+media/folder sel.] menu’s

[Record/play] ([Playback]) option to select the memory card used for image recording and playback.

73

Selecting the Media, Folder, and Recording Method

3 Setting the Recording Method

You can set how the image is recorded to the memory card.

1

Select [Record func+media/folder sel.].

Under the [5] tab, select [Record

func+media/folder sel.], then press

<0>.

2

Select [Record func.].

Turn the <5> dial to select [Record

func.], then press <0>.

3

Select the recording method.

Turn the <5> dial to select the recording method, then press <0>.

Standard

When both memory cards are in the camera, the selected card will record the images.

Auto switch media

When both memory cards are in the camera, the selected card will record the images. Then when the card becomes full, the camera will automatically switch to the other card to record images.

Rec. separately

Each image is recorded to both the CF and SD cards. The image size (3/4/5/6/1/9) to be recorded can be set individually for each card. (p.52) For example, you can record a JPEG image to both cards or a RAW image to one card and sRAW to the other card.

Rec. to multiple

Each image is recorded to both the CF and SD cards simultaneously. 1+JPEG or 9+JPEG can also be selected.

(p.52)

74


When [Auto switch media] is set, the card for recording will switch from f to g.

When [Rec. separately] or [Rec. to multiple] is set, the image will be recorded under the same file number in both the CF and SD cards. The number of shots remaining displayed on the top LCD panel and in the viewfinder is based on the card having less capacity than the other card. If one of the cards becomes full, [Card* full] will be displayed and shooting will be disabled. If this happens, either replace the card or set the recording method to [Standard] or [Auto

switch media]. If there is a card with remaining space, shooting can continue.

3 Creating a Folder

1

Select [Folder].

In step 2 for “Setting the Recording

Method,” select [Folder], then press

<0>.

2

Select [Create folder].

Turn the <5> dial to select [Create

folder], then press <0>.

3

Select [OK].

X A new folder with a higher one-up folder number is created.

3 Selecting a Folder

Lowest file number

Quantity of images in folder

Turn the <5> dial to select the folder, then press <0>.

Look at the images on the right to help you select the folder you want.

Subsequent captured images will be recorded into the selected folder.

Folder name

Highest file number

75


About Folders

As with “100EOS1D” for example, the folder name starts with three digits

(folder number) followed by five characters. A folder can contain up to 9999 images (file No. 0001 - 9999). When a folder becomes full, a new folder with a higher one-up folder number is created automatically. Also, if manual reset

(p.80) is executed, a new folder will be created automatically. Folders numbered from 100 to 999 can be created.

Creating Folders with a Personal Computer

With the memory card open on the screen, create a new folder named “DCIM”.

Open the DCIM folder and create as many folders as necessary to save and organize your images. The folder name must follow the “100ABC_D” format where the first three digits is 100 - 999 followed by five alphanumeric characters. The five characters can be a combination of upper- or lower-case letters from A to Z, numerals, and an underscore “_”. There can be no spaces in the folder name. Also, folder names cannot have the same three-digit number such as “100ABC_D” and “100W_XYZ” even if the letters are different.

76

3

Changing the File Name

The file name has four alphanumeric characters followed by a four-digit image number (p.79) and extension. The first four alphanumeric characters are set upon factory shipment and unique to the

(Ex.)

7E3B0001.jpg

camera. However, you can change it.

With “User setting1,” you can change and register the four characters as desired. With “User setting2,” if you register three characters, the fourth character from the left will be appended automatically to indicate the image size.

Registering the File Name (first 4 characters)

1

Select [File name setting].

Under the [5] tab, select [File name

setting], then press <0>.

2

Select [Change User setting].

Turn the <5> dial to select [Change

User setting*], then press <0>.

3

Enter any alphanumeric characters.

With User setting1, enter 4 characters.

With User setting2, enter 3 characters.

Operate the <5> dial or <9> to move the cursor to the right of the character to be deleted. Then press the <L> button to delete the character.

Press the <H> button, and the text palette will be highlighted in a color frame and text can be entered.

77

3 Changing the File Name

Operate the <5> dial or <9> to move the and select the desired character. Then press <0> to enter it.

Enter the required number of alphanumeric characters, then press the <M> button.

X The new file name will be registered and the screen in step 2 will reappear.

4

Select the registered file name.

Turn the <5> dial to select [File

name], then press <0>.

Turn the <5> dial to select the registered file name.

If User setting2 has been registered, select “*** (the 3 characters registered) + image size.”

About User setting2

When you select the “*** + image size” registered with User setting2 and take pictures, the image size character will be automatically appended as the file name’s fourth character from the left. The meaning of the file name characters is as follows:

“*** L” = 3 (JPEG Large), 1 “***M” = 4 (JPEG Medium1)

“*** N” = 5 (JPEG Medium2) “*** S” = 6 (JPEG Small), 9

When the image is transferred to a personal computer, the automatically appended fourth character will be included. You can then see the image size without having to open the image. The image type (RAW, sRAW, JPEG) can be distinguished with the extension.

78

The first character cannot be an underscore “_”.

The extension will be “.JPG” for JPEG images and “.CR2” for RAW and sRAW images.

3

File Numbering Methods

The 4-digit file number is like the frame number on a roll of film. The captured images are assigned a sequential file number from 0001 to

9999 and saved to one folder. You can also change how the file number is assigned.

(Ex.)

7E3B0001.jpg

1

Select [File numbering].

Under the [5] tab, select [File

numbering], then press <0>.

2

Select the file numbering method.

Turn the <5> dial to select the desired method, then press <0>.

Continuous

Continues the file numbering sequence even after the memory card is replaced or a new folder is created.

Even after you replace the memory card or create a new folder, the file numbering continues in sequence up to 9999. This is convenient when you want to save the images numbered anywhere between 0001 to 9999 in multiple cards or folders into one folder in your personal computer.

If the replacement memory card or existing folder already contains images recorded previously, the file numbering of the new images might continue from the file numbering of the existing images in the card or folder. If you want to save images with continuous file numbering, use a newly formatted memory card each time.

File numbering after replacing the memory card

File numbering after changing the folder

Card A Card B

100

Card A

101

XXXX0051 XXXX0052 XXXX0051 XXXX0052

79

3 File Numbering Methods

Auto Reset

The file numbering restarts from 0001 each time the memory card is replaced or a new folder is created.

Whenever the memory card is replaced or a new folder created, the file numbering starts from 0001. This is convenient if you want to organize images according to memory cards or folders.

If the replacement memory card or existing folder already contains images recorded previously, the file numbering of the new images might continue from the file numbering of the existing images in the card or folder. If you want to save images with the file numbering starting from

0001, use a newly formatted memory card each time.

File numbering after replacing the memory card

File numbering after changing the folder

Card A Card B Card A

100 101

XXXX0051 XXXX0001 XXXX0051 XXXX0001

Manual Reset

The file numbering starts from 0001 in the new folder.

When you reset the file numbering manually, a new folder is created automatically and the file numbering of images saved to that folder starts from 0001. This is convenient when you want to use different folders for the images taken yesterday and the ones taken today, for example. After the manual reset, the file numbering returns to continuous or auto reset.

80

Setting the AF and

Drive Modes

The Area AF has 45 AF points

(19 high-precision cross-type points and 26 Assist AF points).

You can select any one of the 19 cross-type points to match your composition.

You can also select the AF mode to match the shooting conditions and subject and select the best drive mode.

<f> stands for auto focus. <g> stands for manual focus.

First set the power switch to <J>.

81

E : Selecting the AF Mode

Select the AF mode suiting the shooting conditions or subject.

1

On the lens, set the focus mode switch to <

f

>.

2

Press the <o> button.

(9)

3

Select the AF mode.

Turn the <6> dial to select the AF mode.

One-Shot AF for Still Subjects

Suited for still subjects. When you press the shutter button halfway, the camera will focus only once.

When focus is achieved, the AF point which achieved focus will flash in red, and the focus confirmation light <o> in the viewfinder will also light.

With evaluative metering, the exposure setting will be set at the same time focus is achieved.

While you hold down the shutter button halfway, the focus will be locked. You can then recompose the shot if desired.

AF is also possible by pressing the

 button.

82

E : Selecting the AF Mode

If focus cannot be achieved, the focus confirmation light <o> in the viewfinder will blink. If this occurs, a picture cannot be taken even if the shutter button is pressed completely. Recompose the picture and try and focus again. Or see “When Autofocus Fails” (p.86).

If the [2 Beep] menu is set to [Off], the beeper will not sound when focus is achieved.

Focus Lock

After achieving focus with One-Shot AF, you can lock the focus on a subject and recompose the shot. This is called “focus lock.” This is convenient when you want to focus a subject not covered by the Area AF.

AI Servo AF for Moving Subjects

This AF mode is for moving subjects when the focusing distance keeps changing. While you hold down the shutter button halfway, the subject will be focused continuously.

The exposure is set at the moment the picture is taken.

AF is also possible by pressing the

 button.

Focus Tracking with AI Servo AF

If the subject approaches or retreats from the camera at a constant rate, the camera tracks the subject and predicts the focusing distance immediately before the picture is taken. This is for obtaining correct focus at the moment of exposure.

When the AF point selection is automatic (p.84), the camera first uses the center AF point to focus. During autofocusing, if the subject moves away from the center AF point, focus tracking continues as long as the subject is covered by the Area AF.

With a manually selected AF point, the selected AF point will focus track the subject.

With AI Servo AF, the beeper will not sound even when focus is achieved. Also, the focus confirmation light <o> in the viewfinder will not light.

83

S Selecting the AF Point

Automatic AF Point Selection

From among the 45 AF points, the camera selects the AF point automatically to suit the shooting conditions.

Manual AF Point Selection

You can manually select any of the 19 cross-type AF points. This is best when you want to focus the target subject at will, or autofocus quickly while composing the shot.

Automatic AF point selection

Manual AF point selection

1

Press the <S> button.

(9)

X The current AF point will light in the viewfinder.

2

Select the AF point.

To select a horizontal AF point, turn the <6> dial. If all the peripheral AF points light up, automatic AF point selection will take effect.

The AF point selection will follow the periphery as you turn the <5> dial. If the current AF point is near the center, the AF point selection will follow an oval path. If the current AF point is along the periphery, the AF point selection will follow the periphery and stop at the top or bottom.

By pressing <9>, you can select the center AF point z automatic selection.

When you press the shutter button halfway, the camera will be ready to shoot.

84

The 26 Assist AF points are not user selectable.

The <9> cannot be used to manually select any AF point other than the center AF point.

With C.Fn III -9 [Selectable AF point], the selectable AF points can be limited to the inner or outer 9 AF points. (p.170)

With C.Fn III -8 [AF expansion w/selected pt], the manually-selected AF point’s adjacent left and right AF points or the surrounding AF points can also be made active. (p.170)

By registering the AF point you use frequently, you can switch to it instantly with C.Fn III -10-1 or C.Fn III -6-6 (p.171, 168).

S Selecting the AF Point

Lens’ Maximum Aperture and AF Sensitivity

The EOS-1D Mark III can execute high-precision AF with lenses whose maximum aperture is f/2.8 or larger.

With f/2.8 and faster lenses*

Assist AF points

Cross-type points

With the 19 AF points indicated by , high-precision, cross-type AF (both horizontal- and vertical-line sensitive) is possible. With cross-type AF, vertical-line detection is about 2 times as sensitive as horizontal-line detection. The remaining

26 Assist AF points are horizontal-line sensitive only.

* Excluding the EF24mm f/2.8 and EF28mm f/2.8.

With lenses whose maximum aperture is larger than f/4

If the maximum aperture of the lens or Extender and lens combination is faster than f/4, the center AF point will work as a high-precision, cross-type point sensitive to both horizontal and vertical lines. The remaining 18 AF points and the 26 Assist AF points work as horizontalline sensitive AF points.

With lenses whose maximum aperture is larger than f/5.6

With lenses whose maximum aperture is larger than f/5.6, all the AF points, including the Assist AF points, will be horizontal-line sensitive only.

With lenses whose maximum aperture is larger than f/8

With lenses whose maximum aperture is larger than f/8, AF will be possible with the center AF point which will be horizontal-line sensitive.

AF will not work with the other AF points.

When the EF70-200mm f/2.8L USM is used with an Extender, use the center

AF point only. The other AF points may cause a focusing error.

When using the EF24mm f/2.8 or EF28mm f/2.8 lens, the 13 AF points shown on the right can be used as cross-type points. The remaining 6 AF points will be horizontal-line sensitive.

85

When Autofocus Fails

Autofocus can fail to achieve focus (the focus confirmation light <o> blinks) with certain subjects such as the following:

Subjects difficult to focus

Low-contrast subjects

Example: Blue sky, solid-color walls, etc.

Subjects in low light

Extremely backlit and reflective subjects

Example: Car with a reflective body, etc.

Overlapping near and far objects

Example: Animal in a cage, etc.

Repetitive patterns

Example: Skyscraper windows, computer keyboards, etc.

In such cases, do one of the following:

(1) With One-Shot AF, focus an object at the same distance as the subject and lock the focus before recomposing. (p.83)

(2) Set the lens focus mode switch to <g> and focus manually.

Manual Focusing

1

Set the lens focus mode switch to

<MF>.

2


Focus by turning the lens focusing ring until the subject looks sharp in the viewfinder.

86

During manual focusing, the center AF point for automatic AF point selection or the selected AF point for manual AF point selection will flash in red when it achieves focus. The focus confirmation light <o> will also light.

R : Selecting the Drive Mode

1


(9)

2

Select the drive mode.

While looking at the top LCD panel, turn the <5> dial.

u : Single shooting

When you press the shutter button completely, one shot will be taken.

o : High-speed continuous

shooting (Max. 10 shots per sec.) p : Low-speed continuous

shooting (Max. 3 shots per sec.)

In the o and p modes, the camera will shoot continuously while you hold down the shutter button completely.

k : Self-timer (10-sec. delay) l : Self-timer (2-sec. delay)

See the next page for the selftimer operation procedure.

6 : Silent single shooting

The shooting sound for single shooting is quieter than .

When the internal buffer memory becomes full during continuous shooting, “buSY” will be displayed on the top LCD panel and in the viewfinder and shooting will be disabled temporarily. As the captured images are recorded to the memory card, you will be able to shoot more images. Press the shutter button halfway to check in the viewfinder’s right for the current maximum burst. This is the maximum number of shots that can be taken continuously.

Maximum burst

If “Card * Full” is displayed in the viewfinder and on the top LCD panel, make sure to wait until the access lamp stops blinking, then replace the memory card.

When the battery level drops to about 10% (p.29), the drive mode icon (o, p ,u ) will blink and the continuous shooting speed will be slower.

87

j Self-timer Operation

1


(9)

2

Select either <k> or <l>.

Look at the top LCD panel and turn the <5> dial to select <k> or

<l>.

k : 10-sec. self-timer l : 2-sec. self-timer

3


Focus the subject and press the shutter button completely.

X The self-timer lamp will blink, and 10 sec. or 2 sec. later, the picture will be taken.

X The lamp’s blinking will become faster two seconds before the picture is taken.

X During the self-timer operation, the top LCD panel counts down the seconds until the picture is taken.

Do not stand in front of the camera when you press the shutter button to start the self-timer. Doing so prevents the camera from focusing the subject.

88

Use a tripod when using the self-timer.

Before starting the self-timer, look through the viewfinder or cover it with the eyepiece shutter (p.103).

To cancel the self-timer after it starts, set the power switch to <2>.

When using the self-timer to shoot only yourself, use focus lock (p.83) for an object at about the same distance as where you will be.

The 2-second self-timer is effective for close-ups or photo duplicating work to prevent camera shake (camera movement while the shutter button is pressed).

Exposure Control

Select the shooting mode to suit the subject or shooting objective. You can set the shutter speed and/or aperture to obtain the exposure you want.

Also, with an EX-series Speedlite, you can take flash pictures as easily as normal shooting without flash.

First set the power switch to <J>.

89

q Metering Modes

1

Press the <Q> button.

(9)

2

Select the metering mode.


q : Evaluative Metering w : Partial Metering r : Spot Metering e : Center-weighted Average

Metering

q Evaluative Metering

This is the camera’s standard metering mode suited for most subjects even under backlit conditions. After detecting the subject’s position in the viewfinder, the brightness, background, front and back lighting conditions, and other complex lighting elements, the camera sets the proper exposure for the main subject matching the camera orientation.

w Partial Metering

Effective when the background is much brighter than the subject due to backlighting, etc. The metering is weighted at the center covering about

13.5% of the viewfinder area.

r Spot Metering

This is for metering a specific part of the subject or scene. The metering is weighted at the center covering about

3.8% of the viewfinder area.

90

When C.Fn I -7 [Spot meter. link to AF point] is set to [1:Enable (use

active AF point)], spot metering can be linked to the 19 (or 9 outer or inner points) AF points. (p.160)

q Metering Modes

e Center-weighted Average

Metering

The metering is weighted at the center and then averaged for the entire scene.

Multi-Spot Metering

With multiple spot meter readings, you can see the relative exposure levels of multiple areas in the picture and set the exposure to obtain the desired result.

1

Set the metering mode to r spot metering.

2

Press the <I> button.

(8)

Aim the spot metering circle over the area where you want a relative exposure reading, then press the button.

X On the right of the viewfinder, the relative exposure level will be displayed for the spot meter reading taken. For the exposure, the average of the spot meter readings will be set.

While referring to the exposure level indicator’s three spot metering marks, you can set the exposure compensation to set the final exposure and obtain the desired result.

You can take up to eight spot meter readings for one picture.

The exposure setting obtained with multi-spot meter readings will be canceled in the following cases:

• After taking the last spot meter reading, 16 seconds elapse.

• You pressed the <W>, <o>, <Q>, <Z>, <S>, or <O> button.

• After taking the picture, you let go of the shutter button.

Multi-spot metering is possible even with AF point-linked spot metering (C.Fn I -7-1).

91

d : Program AE

The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE.

* <d> stands for Program.

* AE stands for Auto Exposure.

1

Press the <W> button.

(9)

2

Select <d>.

Turn the <6/5> dial to select

<d>.

3


Look through the viewfinder and aim the selected AF point over the subject.

Then press the shutter button halfway.

X The AF point which achieves focus flashes in red, and the focus confirmation light <o> in the viewfinder’s bottom right lights.

(In the One-Shot AF + automatic AF point selection mode)

X The shutter speed and aperture will be set automatically and displayed in the viewfinder and on the top LCD panel.

4

Check the shutter speed and aperture display.

A correct exposure will be obtained as long as the shutter speed and aperture display do not blink.

92

d : Program AE

5


Compose the shot and press the shutter button completely.

If “30"” shutter speed and the maximum aperture blink, it indicates underexposure.

Increase the ISO speed or use flash.

If the “8000” shutter speed and the minimum aperture blink, it indicates overexposure.

Lower the ISO speed or use an ND filter (optional) to reduce the amount of light entering the lens.

If the focus confirmation light <o> blinks, the shutter will lock and a picture cannot be taken. (p.86)

When automatic AF point selection is used (p.84), multiple AF points may flash simultaneously when focus is achieved.

About Program Shift

In Program AE mode, you can freely change the shutter speed and aperture combination (Program) set by the camera while maintaining the same exposure. This is called Program Shift.

To do this, press the shutter button down halfway, then turn the <6> dial until the desired shutter speed or aperture value is displayed.

Program Shift is canceled automatically after the picture is taken.

Program Shift cannot be used with flash.

93

s : Shutter-Priority AE

In this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the correct exposure matching the brightness of the subject. This is called shutter-priority AE.

A faster shutter speed can freeze the action or moving subject. Or a slower shutter speed can create a blurred effect, giving the impression of motion.

* <s> stands for Time value.

94

Fast shutter speed Slow shutter speed

1

Select <s>.

Press the <W> button and turn the <6/5> dial to select <s>.

2

Set the desired shutter speed.


3


Press the shutter button halfway.

X The aperture is set automatically.

4

Check the viewfinder display and shoot.

As long as the aperture is not blinking, the exposure will be correct.

s : Shutter-Priority AE

If the maximum aperture blinks, it indicates underexposure.

Turn the <6> dial to set a slower shutter speed until the aperture stops blinking or set a higher ISO speed.

If the minimum aperture blinks, it indicates overexposure.

Turn the <6> dial to set a faster shutter speed until the aperture stops blinking or set a lower ISO speed.

Shutter Speed Display

The shutter speeds from “8000” to “4” indicate the denominator of the fractional shutter speed. For example, “125” indicates 1/125 sec. Also, “0"5” indicates 0.5 sec. and “15"” is 15 sec.

95

f : Aperture-Priority AE

In this mode, you set the desired aperture and the camera sets the shutter speed automatically to obtain the correct exposure suiting the subject brightness. This is called aperture-priority AE.

A higher f/number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus. On the other hand, a lower f/number (larger aperture hole) will make less of the foreground and background fall within acceptable focus.

* <f> stands for Aperture value (aperture opening).

96

With a large aperture opening With a small aperture opening

1

Select <f>.

Press the <W> button and turn the <6/5> dial to select <f>.

2

Set the desired aperture.


3



X The shutter speed is set automatically.

4

Check the viewfinder display and shoot.

As long as the shutter speed is not blinking, the exposure will be correct.

f : Aperture-Priority AE

If the “30"” shutter speed blinks, it indicates underexposure.

Turn the <6> dial to set a larger aperture

(smaller f/number) until the blinking stops or set a higher ISO speed.

If the “8000” shutter speed blinks, it indicates overexposure.

Turn the <6> dial to set a smaller aperture (larger f/number) until the blinking stops or set a lower ISO speed.

Aperture Display

The larger the f/number, the smaller the aperture opening will be. The aperture values displayed will differ depending on the lens. If no lens is attached to the camera, “00” will be displayed for the aperture value.

Depth-of-Field Preview

Press the depth-of-field preview button to stop down to the current aperture setting. You can check the depth of field

(range of acceptable focus) through the viewfinder.

A higher f/number will make more of the foreground and background fall within acceptable focus. However, the viewfinder will look darker.

If the depth of field is difficult to discern, hold down the depth-of-field preview button while turning the <6> dial.

The exposure will be locked (AE lock) while the depth-of-field preview button is pressed.

97

a : Manual Exposure

In this mode, you set both the shutter speed and aperture as desired. To determine the exposure, refer to the exposure level indicator in the viewfinder or use a commercially-available handheld exposure meter.

This method is called manual exposure.

* <a> stands for Manual.

1

Select <a>.

Press the <W> button and turn the <6/5> dial to select <a>.

2

Set the desired shutter speed.


3


Make sure the power switch is set to

<J>.


You can also set it with the <O> button and <6/5> dial.

4



X The exposure setting will be displayed.

On the right of the viewfinder, the exposure level indicator <s> indicates the current exposure level relative to the standard exposure index <a>.

5

Set the exposure and take the picture.

Check the exposure level and set the desired shutter speed and aperture.

98

O Exposure Compensation

Exposure compensation is used to alter the standard exposure set by the camera. You can make the image look brighter (increased exposure) or darker (decreased exposure). You can set the exposure compensation up to ±3 stops in 1/3-stop increments.

Increased exposure

Decreased exposure

1

Check the exposure level indicator.

Press the shutter button halfway and check the exposure level indicator.

2

Set the exposure compensation amount.

Make sure the power switch is set to

<J>.


LCD panel, turn the <5> dial.

Turn the <5> dial while pressing the shutter button halfway or within (9) after pressing the shutter button halfway.

X When exposure compensation has been set, the <y> icon will be displayed in the viewfinder.

To cancel exposure compensation, set the exposure level indicator to the standard exposure index (<a> or

<C>).

3


The exposure compensation amount will remain in effect even after you set the power switch to <2>.

Take care not to turn the <5> dial and change the exposure compensation inadvertently. To prevent this, set the power switch to

<1>.

You can also set it with the <O> button and <6/5> dial.

99

h Auto Exposure Bracketing (AEB)

By changing the shutter speed or aperture automatically, the camera brackets the exposure up to ±3 stops in 1/3-stop increments for three successive shots. This is called AEB.

* AEB stands for Auto Exposure Bracketing.

1

Hold down the <W> and

<o> buttons simultaneously.

(9)

X The <h> icon and “0.0” will appear on the top LCD panel.

2

Set the AEB amount.

Turn the <6/5> dial to set the

AEB amount.

“1.0” is the AEB increment, and <N> is the AEB amount.

Standard exposure

Decreased exposure

Increased exposure

3


In the current drive mode, the pictures will be taken in this sequence: Standard exposure, decreased exposure, and increased exposure.

After the three bracketed shots are taken,

AEB will not be canceled. To cancel AEB, set the AEB increment to “0.0”.

100

During AEB shooting, the <w> icon in the viewfinder and the <h> icon on the top LCD panel will blink.

The AEB setting will be canceled automatically if the power switch is set to <2> or if the flash is ready.

If the shooting mode is set to “buLb,” AEB cannot be used.

If the drive mode is set to single shooting or <6>, you must press the shutter button three times. When <o> or is set and you hold down the shutter button completely, the three bracketed shots will be taken continuously. Then the camera will stop shooting. When <k> or <l> is set, the three bracketed shots will be taken after a 10-sec. or 2-sec. delay.

AEB can also be combined with exposure compensation.

A AE Lock

Use AE lock when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the <A> button to lock the exposure, then recompose and take the shot. This is called AE lock. It is effective for backlit subjects.

1



X The exposure setting will be displayed.

2

Press the <w> button.

(9)

X The <w> icon will light in the viewfinder and the exposure setting will be locked (AE lock).

Each time you press the <A> button, it locks the current exposure setting.

3

Recompose and take the picture.

The exposure level indicator will show the AE lock exposure level and the current exposure level in real-time.

If you want to maintain the AE lock while taking more shots, hold down the <A> button and press the shutter button to take another shot.

AE Lock Effects

Metering mode q Evaluative

Metering* w Partial Metering r Spot Metering e Center-weighted

Average Metering

AF Point Selection Method

Automatic selection Manual selection

AE lock is applied at the AF point that achieved focus.

AE lock is applied at the selected AF point.

AE lock is applied at the center AF point.

* When the lens’ focus mode switch is set to <g>, AE lock is applied at the center AF point.

101

Bulb Exposures

When bulb is set, the shutter stays open while you hold down the shutter button completely, and closes when you let go of the shutter button. This is called bulb exposure. Use bulb exposures for night scenes, fireworks, the heavens, and other subjects requiring long exposures.

c d e

1

Select “buLb”.

Press the <W> button and turn the <6/5> dial to select “buLb”.

2


While looking at the top LCD panel, turn the <6/5> dial.

3


Press the shutter button completely.

X The elapsed exposure time will be displayed on the top LCD panel.

1: min. 2: sec. 3: hour

Since bulb exposures produce more noise than usual, the image will look rough or grainy.

For bulb exposures, using Remote Switch RS-80N3 or Timer Remote

Controller TC-80N3 (both optional) is recommended.

When C.Fn II -1 [Long exp. noise reduction] is set to [1:Auto] or

[2:On], noise generated by the bulb exposure can be reduced. (p.163)

U

LCD Panel Illumination

Each time you press the button, the illumination of the top and rear LCD panels will turn on or off (9). During a bulb exposure, pressing the shutter button completely will turn off the LCD panel illumination.

102

Bulb Exposures

Eyepiece Shutter

If your eye is not looking at the viewfinder, stray light entering the eyepiece can adversely affect the exposure. To prevent this, slide the eyepiece shutter lever as shown by the arrow to shutter the eyepiece.

Connecting the Remote Switch

You can connect Remote Switch RS-80N3 or Timer Remote Controller

TC-80N3 (both optional) or any EOS accessory equipped with an N3type terminal to the camera and shoot with it.

To operate the accessory, refer to its instruction manual.

1

Open the terminal cover.

Open the upper cover.

2

Connect the plug to the remote control terminal.

Connect the plug as shown in the illustration.

To disconnect the plug, grasp the plug’s silver part and pull out.

103

Mirror Lockup

Although using the self-timer or Remote Switch can prevent camera shake, using mirror lockup to prevent camera vibrations can also help when you use a super telephoto lens or shoot close ups.

When C.Fn III -15 [Mirror lockup] is set to [1:Enable] or [2:Enable:

Down with SET] (p.172), shooting with mirror lockup is possible.

1

Focus the subject, press the shutter button completely and release it.

X The mirror will lockup and <2> will blink on the top LCD panel.

2

Press the shutter button completely again.

X The picture will be taken.

With [1] set, the mirror will go back down when the picture is taken.

With [2] set, the mirror lockup will remain even after the picture is taken. To cancel the mirror lockup, press <0>.

In very bright light such as at the beach or ski slope on a sunny day, take the picture promptly after mirror lockup.

During mirror lockup, do not point the camera lens at the sun. The sun’s heat can scorch and damage the shutter curtains.

If you use bulb exposures, the self-timer, and mirror lockup in combination, keep pressing the shutter button completely (self-timer delay time + bulb exposure time). If you let go of the shutter button during the 2-sec./10-sec. self-timer countdown, there will be a shutterrelease sound. This is not the actual shutter release (no picture is taken).

104

When [1:Enable] is set, single shooting will take effect even if the drive mode is continuous. When [2:Enable: Down with SET] is set, the current drive mode will take effect for the shooting.

When the self-timer is set to <k> or <l>, the picture will be taken after 10 sec. or 2 sec. respectively.

The mirror locks up, and after 30 seconds, it will go back down automatically.

For mirror lockup shots, using Remote Switch RS-80N3 or Timer Remote

Controller TC-80N3 (both optional) is recommended.

Flash Photography

EX-series Speedlite

An EX-series Speedlite (optional) makes flash photography as easy as normal shooting without flash. You can easily do the flash operations below. For detailed instructions, see the EX-series Speedlite’s instruction manual.

E-TTL II Autoflash

E-TTL II is an autoflash exposure system incorporating improved flash exposure control and lens focusing distance information, making it more precise than the previous E-TTL system (evaluative flash metering with preflash). The camera can execute E-TTL II autoflash with any EX-series Speedlite.

• High-Speed Sync (FP flash)

With high-speed sync, you can set a flash sync speed faster than 1/

300 sec.

• FE (Flash Exposure) Lock

Press the camera’s button to lock the flash exposure at the desired part of the subject.

• Flash Exposure Compensation

In the same way as normal exposure compensation, you can set exposure compensation for flash. You can set the flash exposure compensation up to ±3 stops in 1/3-stop increments.

With the camera, set it with the <Q> button and <5> dial.

• FEB (Flash Exposure Bracketing)

The flash output is changed automatically for three successive shots

(only with FEB-compatible Speedlites). Set flash exposure bracketing up to ±3 stops in 1/3-stop increments. During FEB shooting, the <r> icon will blink in the viewfinder.

• E-TTL II Wireless Autoflash with Multiple Speedlites

As with wired, multiple Speedlites, wireless E-TTL II autoflash with multiple Speedlites (those compatible with wireless flash) provides all the above features. Sophisticated lighting effects can be obtained since connection cables are unnecessary.

105

Flash Photography

Flash Function Settings and Flash Custom Functions

When an EX-series Speedlite (such as the 580EX II) controllable by the camera is attached, you can use the camera’s menu screen to set the

Speedlite’s flash function settings such as the flash mode, FEB, and 1st or 2nd curtain sync, and the flash Custom Functions.

Turn on the Speedlite before setting its functions.

For details on which Speedlite settings the camera can set, see the EXseries Speedlite’s instruction manual.

1

Select [External Speedlite control].

Under the [6] tab, select [External

Speedlite control], then press <0>.

Flash function settings

Flash C.Fn settings

2

Select either [Flash function settings] or [Flash C.Fn settings].

Turn the <5> dial to select the menu item, then press <0>.

3

Set the flash function settings.

Select a flash function and set it as desired. The procedure is the same as setting a menu function.

On the flash function settings screen, the settable items, current settings, flash mode setting, and flash Custom

Function settings might look different on your camera.

106

Flash Photography

Metered Manual Flash Exposure

This is for close-up flash photography when you want to set the flash level manually. Use an 18% gray card and an EX-series Speedlite which has manual flash mode. Follow the instructions below:

1. Set the camera and Speedlite settings.

• Set the camera’s shooting mode <a> or <f>.

• Set the Speedlite to manual flash mode.

2. Focus the subject.

• Focus manually.

3. Set up the 18% gray card.

• Place the gray card at the subject’s position.

• In the viewfinder, the entire spot metering circle at the center should cover the gray card.

4. Press the button. (8)

5. Set the flash exposure level.

• Adjust the Speedlite’s manual flash level and the camera aperture so that the flash exposure level aligns with the standard exposure index.

6. Take the picture.

• Remove the gray card and take the picture.

If flash exposure compensation has already been set with the Speedlite, you cannot use the camera’s <Q> button or Flash function settings menu to set flash exposure compensation. If it is set with both the camera and Speedlite, the Speedlite’s setting overides the camera’s.

If autofocus cannot be achieved, the external, EOS-dedicated

Speedlite’s AF-assist beam (if the Speedlite has it) will be emitted automatically.

If focus cannot be achieved with the external Speedlite’s AF-assist beam, select the center AF point. With some external Speedlites, autofocus with AF-assist beam works only with the center AF point.

This camera is a Type-A camera that can use all the features of EXseries Speedlites.

107

Flash Photography

Canon Speedlites other than the EX-series

With an EZ/E/EG/ML/TL-series Speedlite set in the TTL or A-TTL

autoflash mode, the flash can be fired at full output only. Set the camera’s shooting mode to manual or aperture-priority AE and shoot.

When using a Speedlite which has manual flash mode, shoot with the manual flash mode.

With an EX-series Speedlite set to TTL autoflash with the flash’s

Custom Function, the flash will fire at full output only.

Using Non-Canon Flash Units

Sync Speed

The camera can synchronize with compact, non-Canon flash units at 1/300 sec. (or 1/250 sec.) or slower shutter speeds. With large studio flash, the sync speed is 1/60 sec. or slower. Be sure to test the flash unit beforehand to make sure it synchronizes properly with the camera.

PC Terminal

The camera’s PC terminal is provided for flash units having a sync cord. The

PC terminal is threaded to prevent inadvertent disconnection.

The camera’s PC terminal has no polarity. You can connect any sync cord regardless of its polarity.

If the camera is used with a flash unit or flash accessory dedicated to another camera brand, the camera may not operate properly and malfunction may result.

Also, do not connect to the camera’s PC terminal any flash unit requiring

250 V or more.

Do not attach a high-voltage flash unit on the camera’s hot shoe. It might not work.

108

A flash unit attached to the camera’s hot shoe and a flash unit connected to the PC terminal can both be used at the same time.

Live View Shooting

You can shoot while viewing a real-time image on the camera’s LCD monitor or on a personal computer screen. This is called “Live View shooting.”

When using Live View shooting, using a hard disk-type CF

card (such as MicroDrive) is not recommended. Use a memory card instead.

If Live View shooting is done under direct sunlight or other hightemperature environments, the < > icon (warning for high temperature in the camera) may appear on the screen. If Live View shooting continues with a high internal temperature, it may degrade image quality. You should therefore stop Live View shooting if the warning icon appears.

With a hard disk-type CF card in the camera, if Live View shooting continues while the < > warning icon is displayed and the camera’s internal temperature increases, the Live View shooting will stop automatically to protect the hard disk from the heat. Live View shooting will be disabled until the camera’s internal temperature decreases.

About Remote Live View Shooting

With the provided software installed in the personal computer, you can connect the camera to the personal computer and shoot remotely while viewing the computer screen instead of the camera’s viewfinder. For details, see the Software Instruction Manual in the CD-ROM.

109

Live View Shooting

Instead of looking through the viewfinder, you can look at a real-time image on the camera’s LCD monitor while shooting. You can also magnify the real-time image on the LCD monitor by 5x or 10x so you can focus more precisely. Convenient when the camera is mounted on a tripod for shooting still lifes, for example.

Preparing for Live View Shooting

1

Set the lens focus mode switch to

<g>.

During Live View shooting, autofocusing is not possible.

2

3

4

Select [Live View function settings].

Under the [6] tab, select [Live View

function settings], then press <0>.

Select [Live View shoot.].

Turn the <5> dial to select [Live

View shoot.], then press <0>.

Select [Enable].

Turn the <5> dial to select [Enable], then press <0>.

During Live View shooting, do not point the camera toward the sun. The sun’s heat can damage the camera’s internal components.

110

If you handhold the camera like a compact digital camera and shoot while viewing the LCD monitor, camera shake can cause blurred images. For Live

View shooting, mounting the camera on a tripod is recommended.

Live View Shooting

Displaying Live View Image on the LCD Monitor

With the camera ready to shoot,

press <0>.

X The Live View image will appear on the LCD monitor in real-time with

100% field of view.

With the video cable (provided) connecting the camera to a TV set, you can view images on the TV. (p.122)

During Live View image display, if you point the camera in a different direction, it might throw off the correct brightness momentarily and the image might not look right. Wait until the image stabilizes at the correct brightness before shooting.

If you shoot while the image brightness is not yet stable, the resulting image might be overexposed or underexposed.

If the light source within the image changes, the screen might flicker. If this happens, press <0> to end the shooting, then with the new light source in place, press <0> again to resume shooting.

Setting the Shooting Functions

In the same way as during normal shooting through the viewfinder, you can set the shooting functions (shooting mode, drive mode, memory card selection, image size, ISO speed, Picture Style, white balance, exposure compensation, AEB, AE lock, flash exposure compensation, etc.) while looking at the top/rear LCD panel or LCD monitor.

Only the metering mode cannot be changed. Focusing point-linked evaluative metering with the imaging element will take effect.

Continuous shooting is possible.

The metering and AE lock activated with the <A> button will remain active for 16 sec.

To set the white balance, memory card selection, or image size, press the button and set it with the <5> or <6> dial.

The focus preset feature on super telephoto lenses cannot be used.

111

Live View Shooting

Magnifying the Image for Focusing

1

Move the focusing frame to the position where you want to focus.

Use <9> to select the focusing frame in full view. If you press <9> straight down, the focusing frame will return to the center.

Magnification: Approx. 10x

2

Press the <u> button.

X The focusing frame will be magnified.

X The shutter speed and aperture settings will be displayed in orange.

Each time you press the button, the display format will change as follows:

Full view → Approx. 5x → Approx. 10x

3

Focus manually.

While looking at the Live View image on the LCD monitor, turn the lens’s focusing ring to focus manually.

AE lock

Magnified area

Magnification

High temperatures, high ISO speeds, or long exposures may cause noise or irregular colors in the captured image shot with Live View shooting.

During continuous shooting, the exposure set for the first shot will also be applied to subsequent shots. If you recompose during continuous shooting, the exposure might not match the latter shots.

If the camera is not operated for a prolonged period, the power will turn off automatically as set with [5 Auto power off]. (p.47)

112

While the image is magnified, pressing the <A> button will not renew the exposure setting.

During the 5x or 10x magnified view, the image sharpness may be applied to a higher degree than what was set. This is to make it easier to focus manually.

Live View Shooting

Taking the Picture

1

Check the composition.

Press the to check the image composition in full view.

2

Check the display.

3


Press the shutter button completely.

X The picture will be taken and the captured image is displayed on the LCD monitor.

X After the image review ends, the camera will return to Live View shooting automatically.

To terminate shooting, press <0> while Live View image is displayed.

You can check the exposure and depth of field by pressing the depth-offield preview button.

Flash photography is also possible. However, FE lock, modeling flash, and test firing are not possible. The Speedlite’s Custom Functions also cannot be set with the Speedlite.

With the 580EX II, the wireless setting cannot be changed.

Under low light or bright light conditions, the Live View image might not display the proper brightness. And if you press the depth-of-field preview button, the image might not show the brightness corresponding to the exposure setting. However, the captured image will reflect the exposure setting.

If there is a very bright light source in the picture, such as the sun, the bright area might be covered in black on the LCD monitor. However, the actual captured image will correctly show the bright area.

The time it takes to actually take the picture after you press the shutter button completely is slightly longer than with normal shooting through the viewfinder.

When you press the shutter button completely, the shutter will make two shutter-release sounds (with flash, the reflex mirror and shutter operation make multiple sounds). However, only one shot is taken.

113

Live View Shooting

About the Information Display

Each time you press the button, the information display will change.

Focusing frame

Battery check

Picture Style

AE lock

Flash-ready

Shutter speed

Aperture

Histogram

(Brightness/RGB)

Exposure level

ISO speed

Shots remaining

Flash exposure level

When the [6 Live View function settings] menu’s [Grid display] is set to

[On], a grid will appear to make it easier to align the horizontal or vertical shot.

By setting C.Fn IV -14 [Add aspect ratio information], you can shoot with the same framing as with a medium- for large-format film camera such as 6x6cm, 6x4.5cm, and 4x5 inch. Vertical lines matching the set aspect ratio will be displayed. (p.178)

When C.Fn IV -16 [Live View exposure simulation] is set to

[1:Enable(simulates exposure)], the Live View image will be displayed with the brightness level simulating the exposure setting. This enables you to see how the exposure looks before taking the picture. (p.178)

The histogram (p.118) will be displayed only when C.Fn IV -16-1 has been set. If flash is used or bulb is set, the histogram will be grayed out. The histogram may not be properly displayed in low light or bright light conditions.

During Live View shooting, if the < > warning icon (temperature increase warning) is displayed, see page 109.

114

Possible Shots During Live View Shooting

Temperature

Possible Shots

At 23°C / 73°F

Approx. 350

At 0°C / 32°F

Approx. 250

* The figures above are based on a fully-charged LP-E4 battery and CIPA

(Camera & Imaging Products Association) testing standards.

Image Playback

Learn how to view or erase images, and copy images between the CF card and SD card.

For images taken with another camera:

The camera might not be able to properly display images captured with a different camera or edited with a personal computer or whose file name was changed.

115

x Image Playback

Single image display

1

Playback the image.

Press the <x> button.

X The last captured image or last image viewed will appear.

2

Select the image.

To playback images starting with the last image, turn the <5> dial counterclockwise. To playback images starting with the first captured image, turn the dial clockwise.

Press the button to change the display format.

Single image display Single image display + Image size

116

Histogram display Shooting information display

3

Exit the image playback.

Press the <x> button to exit the image playback and return the camera to shooting ready.

x Image Playback

Shooting Information Display

Single image display + Image size

Protect

Exposure compensation amount

Aperture

Shutter speed

Sound recording

Folder number - File number

Memory card

Image-recording quality

Playback image number/

Total images recorded

Shooting Information Display

Flash exposure compensation amount

White balance correction

Metering mode

Shooting mode

Color temperature if is set

Image-recording quality

Playback image number/

Total images recorded

White balance

File size

Picture Style

AF microadjustment

Histogram

(Brightness/RGB)

ISO speed

Picture Style settings

Color space

Date and time

Original decision (image verification) data appended

117

x Image Playback

About the Highlight Alert

When the [4 Highlight alert] menu is set to [Enable], overexposed highlight areas will blink. To obtain more image detail in the overexposed areas, set the exposure compensation to a negative amount and shoot again.

About the AF Point Display

When the [4 AF point disp.] menu is set to [Enable], the AF point which achieved focus will be displayed in red in the shooting information display and histogram display. If automatic AF point selection was used, multiple AF points might be displayed in red.

About the Histogram

The brightness histogram display shows the exposure level distribution, overall brightness, and gradation. And the RGB histogram display is for checking the color saturation and gradation. The display can be switched with the [4 Histogram] menu.

[Brightness] Display

This histogram is a graph showing the distribution of the image’s brightness level. The horizontal axis indicates the brightness level

(darker on the left and brighter on the right), while the vertical axis indicates how many pixels exist for each brightness level. The more pixels there are toward the left, the darker the image. And the more pixels there are toward the right, the brighter the image. If there are too many pixels on the left, the shadow detail will be lost.

And if there are too many pixels on the right, the highlight detail will be lost. The gradation in-between will be reproduced. By checking the image and its brightness histogram, you can see the exposure level inclination and the overall tone reproduction condition.

Sample Histograms

Dark image

Normal image

[RGB] Display

Bright image

This histogram is a graph showing the distribution of the image’s brightness level of each primary color (RGB or red, blue, and green). The horizontal axis indicates the color’s brightness level (darker on the left and brighter on the right), while the vertical axis indicates how many pixels exist for each color brightness level. The more pixels there are toward the left, the darker and less prominent the color. And the more pixels there are toward the right, the brighter and denser the color. If there are too many pixels on the left, the respective color information will be lacking. And if there are too many pixels on the right, the color will be too saturated with no detail. By checking the image’s RGB histogram, you can see the color’s saturation and gradation condition and white balance inclination.

118

x Image Playback

Index Display

1

Turn on the index display.

During image playback, press the

<y> button.

X The 4-image index display will appear. The currently-selected image will be highlighted in a blue frame.

Press the <y> button again to switch to the 9-image index display.

2

Select an image.

Turn the <5> dial to move the blue frame.

To display an image, press the button.

Jump Display

With the single image display, index display, and magnified view, you can turn the <6> dial to jump through the images.

Browsing Through Images

With the [4 Image jump w/6] menu’s [1 image/10 images/100

images/Screen/Date/Folder] option, you can set the desired jump method.

With the index display, you can jump by a single screen by selecting [1

image]. If you want to jump by date, select [Date]. To jump by folder, select [Folder].

Jump method

Image location

During image playback, turn the

<6> dial.

X The jump display will proceed according to the selected jump method.

X On the bottom right, the jump method and current image location are indicated.

119

x Image Playback

u/y Magnified View

You can magnify the image by 1.5x to 10x on the LCD monitor.

Magnified area

1

Magnify the image.


 button.

X The image will be magnified.

To increase the magnification, hold down the button. The image will continue to be magnified until it reaches the maximum magnification.

To reduce the magnification, press the <y> button. If you hold down the button, the image will continue to reduce to the single image display.

2

Scroll around the image.

Use <9> to scroll around the magnified image.

To exit the magnified display, press the <x> button and the single image display will return.

Magnified View’s Starting Position

Normally, the magnified view starts at the image center. When the [4 Enlarge

display] menu is set to [Enlarge from selected AF point], the magnified view starts at the selected AF point. This is convenient for quickly checking the focus.

120

During the magnified view, you can turn the <5> or <6> dial to view another image at the same magnification and position (the display jumps according to the selected jump method).

In the case of images shot with automatic AF point selection or with manual focus <g>, the magnification will start at the image center.

Magnified view is not possible during the image review immediately after the image is taken.

With [Enlarge from selected AF point]:

• The starting magnification varies depending on the image size that was set.

• When C.Fn III -8-1/2 is set, the focusing point area will be expanded so the AF point which actually achieved focus might not fall within the initial magnified view screen.

x Image Playback

b Rotating an Image

You can rotate the image to the desired orientation.

1

Select [Rotate].

Under the [3] tab, select [Rotate], then press <0>.

2


Turn the <5> dial to select the image to be rotated.

You can also select an image on the index display.

3

Rotate the image.

Each time you press <0>, the image will rotate clockwise as follows:

90° → 270° → 0°

To rotate other images, repeat steps 2 and 3.

To exit the image rotate and return to the menu screen, press the

<M> button.

If you have set [5 Auto rotate] to [OnzD] (p.130) before taking the vertical shots, you need not rotate the image as described above.

If the rotated image is not displayed in the rotated orientation during image playback, set the [5 Auto rotate] menu to [OnzD].

121

x Image Playback

Viewing the Images on TV

By connecting the camera to a TV set with the video cable (provided), you can view the captured images on a TV set. Turn off the camera and the television before connecting them.

1

Connect the camera to the TV.

Open the camera’s terminal cover.

Use the video cable (provided) to connect the camera’s <q> video

OUT terminal to the TV monitor’s

VIDEO IN terminal.

Insert the video cable plugs firmly all the way.

2

Turn on the TV and switch the

TV’s line input to VIDEO IN.

3

Set the camera’s power switch to

<1>.

4

Press the <x> button.

X The image will appear on the TV screen. (Nothing will be displayed on the camera’s LCD monitor.)

After you finish, set the camera’s power switch to <2>, turn off the

TV, then disconnect the video cable.

If the video system format does not match the TV’s, the image will not be displayed properly. Set the proper video system format with [6 Video

system].

Do not use any video cable other than the one provided. Images might not be displayed if you use a different video cable.

122

Depending on the TV monitor, part of the image might be cut off.

J Protecting Images

Protecting the image prevents it from being erased accidentally.

Protecting a Single Image

1

Playback the image to be protected.

2

Protect the image.


<H> button.

X When an image is protected, the

<K> icon will appear above the image.

To cancel the image protection, press the <H> button again. The <K> icon will disappear.

To protect another image, repeat steps 1 and 2.

To exit the image protection, press the <M> button. The menu will reappear.

Protecting All Images in a Folder or Card

You can protect all the images in the folder or memory card at one time.

When the [3 Protect images] menu is set to [All images in folder] or

[All images on card], all the images in the folder or card will be protected.

To cancel the image protection, select [Clear all images in folder] or

[Clear all images on card].

When you format the memory card, the protected images will also be erased.

To protect the image, press and let go of the <H> button. Hold down the button for about 2 sec. and the sound recording will start.

123

J Protecting Images

Images can also be protected individually when the [3 Protect images] menu is set to [Select images]. Press <0> to protect or unprotect the image.

Once an image is protected, it cannot be erased by the camera’s erase function. To erase a protected image, you must first cancel the protection.

If you erase all the images (p.128), only the protected images will remain.

This is convenient when you want to erase unnecessary images all at once.

K Sound Recording

You can add a sound clip to an image. The sound clip will be saved as a sound file (WAV format) having the same file number as the image. The sound can be played back with the provided software.

Microphone

1

Playback the image to which you want to add the sound clip.

2

Record the sound.

While the image is displayed, press the <H> button for about 2 sec.

When [Sound recording] appears, keep pressing the button and speak into the built-in microphone. The maximum recording time for a sound clip is 30 sec.

To end the sound clip, let go of the button.

X The sound will be recorded, and the

< > icon will appear on the screen.

124

The camera cannot playback the sound clip.

Sound recording is not possible with a protected image.

To record a sound clip longer than 30 sec., repeat step 2.

You can also record sound once, right after image capture during the image review by following step 2.

a Copying Images

The images in a memory card can be copied to the other memory card.

Copying Individual Images

1

Select [Image copy].

Under the [3] tab, select [Image

copy], then press <0>.

2

Select [Sel.Image].

Turn the <5> dial to select

[Sel.Image], then press <0>.

Lowest file number

Quantity of images in folder

3

Select the folder.

Turn the <5> dial to select the folder containing the image to be copied, then press <0>.

Refer to the images on the right to help you select the folder you want.

X The images in the selected folder will be displayed.

Folder name

Highest file number

125

a Copying Images

Total images selected 4


Turn the <5> dial to select the image to be copied, then press <0>.

X The <X> icon will appear on the upper left of the screen.

Press the <y> button to display the three-image view. To return to the single-image display, press the button.

To select another image to be copied, repeat step 4.

5

Press the <H > button.

After selecting all the images to be copied, press the <H> button.

6

Select [OK].

Check the target memory card and press <0>.

7

Select the target folder.

Turn the <5> dial to select the target folder where the images are to be copied to, then press <0>.

To create a new folder, select [Create

folder].

8

Select [OK].

Check the copy source and copy target’s information.


126

a Copying Images

X The copying will start and the progress will be displayed.

When the copying is completed, the result will be displayed. Select [OK] to return to the screen in step 2.

Copying All Images in a Folder

In step 2, select [Sel.n]. Select the source folder to be copied, then the target folder.

Copying All Images in a Memory Card

In step 2, select [All image]. All the folders and images in the source memory card will be copied to the target card. (The folder numbers and file names will remain the same in the target folder.)

The copy source is the memory card selected by the [ 5 Record

func+media/folder sel.] menu’s [Record/play] ([Playback]) option.

The file name of the copied image will be the same as the source image’s file name.

If [Sel.Image] has been set, you cannot checkmark <X> images in multiple folders at one time and copy them. Select images in each folder to copy them folder by folder.

If an image is being copied to a target folder having the same folder number as the source folder and the target folder already has an image with the same file number, the following will be displayed: [Skip image and continue] [Replace existing

image] [Cancel copy]. Select the copying method, then press <0>.

• [Skip image and continue]: Any images in the target folder having the same file number as the source images will be skipped and not copied.

• [Replace existing image]: Any images in the target folder having the same file number as the source images (including protected images) will be overwritten.

If the image with a print order (p.147) or transfer order (p.154) is overwritten, you will have to set the print order or transfer order again.

The image’s print order or transfer order information will not be retained when the image is copied.

Shooting is not possible during the copying operation. Select [Cancel] before trying to shoot.

127

L Erasing Images

You can either select and erase images one by one or erase them in one batch. Protected images (p.123) will not be erased.

Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them.

Erasing a Single Image

1

Playback the image to be erased.

2

Press the <L> button.

The erase menu will appear at the bottom of the screen.

3

Erase the image.

X Select [Erase], then press <0>. The image displayed will be erased.

Checkmarking <X> Images to be Erased in a Batch

By checkmarking the images to be erased, you can erase multiple images at one time. On the [3 Erase images] menu, select [Select

and erase images]. With <0>, checkmark <X> the images to be erased. Then press the <L> button.

Erasing All Images in a Folder or Card

You can erase all the images in a folder or card at one time. When the

[3 Erase images] menu is set to [All images in folder] or [All images

on card], all the images in the folder or card will be erased.

128

Changing Image Playback Settings

3 Setting the LCD Monitor Brightness

You can adjust the brightness of the LCD monitor to make it easier to read.

1

Select [LCD brightness].

Under the [6] tab, select [LCD

brightness], then press <0>.

2

Adjust the brightness.

While referring to the gray chart, turn the <5> dial, then press <0>.

To check the image’s exposure, you should look at the histogram (p.118).

3 Setting the Image Review Time

How long the image is displayed on the LCD monitor immediately after capture can be set. To keep the image displayed, set [Hold]. To not have the image displayed, set [Off].

1

2

Select [Review time].

Under the [2] tab, select [Review

time], then press <0>.

Set the desired review time.

Turn the <5> dial to select the time, then press <0>.

If [Hold] is set, the image will be displayed until the auto power off time elapses.

129

Changing Image Playback Settings

3 Auto Rotate of Vertical Images

Vertical images are rotated automatically so they are displayed vertically on the camera’s LCD monitor and personal computer instead of horizontally. The setting of this feature can be changed.

1

Select [Auto rotate].

Under the [5] tab, select [Auto

rotate], then press <0>.

2

Set the auto rotate display.

Turn the <5> dial to select the setting, then press <0>.

[OnzD]

The vertical image is automatically rotated on both the camera’s LCD monitor and on the personal computer.

[OnD]

The vertical image is automatically rotated only on the personal computer.

[Off]

The vertical image is not rotated.

Auto rotate will not work with vertical images captured while Auto rotate was

[Off]. They will not rotate even if you later switch it to [On] for playback.

130

The vertical image will not be automatically rotated for the image review immediately after image capture.

If the vertical image is taken while the camera is pointed up or down, the image might not rotate automatically for playback.

If the vertical image is not automatically rotated on the personal computer screen, it means the software you are using is unable to rotate the image. Using the provided software is recommended.

Sensor Cleaning

The camera has a Self Cleaning Sensor Unit attached to the sensor’s front layer (low-pass filter) to shake off dust automatically.

The Dust Delete Data can also be appended to the image so that any remaining dust spots can be removed automatically by the Digital Photo Professional

(provided software).

Minimizing Dust

When changing lenses, do it in a place with minimal dust.

When storing the camera without a lens attached, be sure to attach the body cap to the camera.

Remove dust on the body cap before attaching it.

Even while the Self Cleaning Sensor Unit is operating, you can press the shutter button halfway to interrupt the cleaning and start shooting immediately.

131

3

Automatic Sensor Cleaning

Whenever you set the power switch to <1/J> or <2>, the Self Cleaning

Sensor Unit operates (approx. 3.5 sec.) to automatically shake off any dust on the front of the sensor. Normally, you need not be aware of this operation.

However, you can execute the sensor cleaning at anytime as well as disable it.

Cleaning the Sensor Now

1

Select [Sensor cleaning].

Under the [7] tab, select [Sensor

cleaning], then press <0>.

2

Select [Clean nowf].

Turn the <5> dial to select [Clean

nowf], then press <0>.

3

Select [OK].


X During the sensor cleaning, the

< f > icon will be displayed on the

LCD monitor. When the cleaning ends, the screen will return to step 2.

The user-executed cleaning takes about 4 sec. to complete. During the sensor cleaning, the shutter will make 3 shutter-release sounds.

However, the image will not actually be taken.

For best results, do the sensor cleaning while the camera bottom is placed on a table or other surface at a perpendicular angle.

Even if you repeat the sensor cleaning multiple times, the result will not improve that much. Right after the sensor cleaning is finished, the

[Cleaning nowf] option will remain disabled temporarily.

Disabling Automatic Sensor Cleaning

In step 2, select [Auto cleaningf] and set it to [Disable].

X Whenever you set the power switch to <1/J> or <2>, the sensor cleaning will not be executed.

132

3

Appending Dust Delete Data

Normally, the Self Cleaning Sensor Unit will eliminate most of the dust visible on captured images. However, in case visible dust still remains, you can append the Dust Delete Data to the image to later erase the dust spots. The Dust Delete Data is used by the Digital Photo

Professional (provided software) to erase the dust spots automatically.

Preparation

Get a solid-white object (paper, etc.).

Set the lens focal length to 50mm or longer.

Set the lens focus mode switch to <g> and set the focus to infinity

(

∞

). If the lens has no distance scale, look at the front of the lens and turn the focusing ring clockwise all the way.

Obtain the Dust Delete Data

1

Select [Dust Delete Data].

Under the [2] tab, select [Dust

Delete Data], then press <0>.

2

Select [OK].

Turn the <5> dial to select [OK], then press <0>. After the automatic sensor cleaning ends, a message will appear.

133

3 Appending Dust Delete Data

3

Photograph a solid-white object.

At a distance of 20 - 30 cm / 0.7 - 1.0 feet, fill the viewfinder with a patternless, solid-white object and take a picture.

X The picture will be taken in the aperture-priority AE mode with an aperture of f/22.

Since the image will not be saved, the data can still be obtained even if there is no memory card in the camera.

X When the picture is taken, the data will be obtained. When the data is obtained, a message will appear.

Select [OK], and the menu will reappear.

If the data was not obtained successfully, a message to that effect will appear. Follow the “Preparation” procedure on the preceding page, then select [OK]. Take the picture again.

About the Dust Delete Data

After the Dust Delete Data is obtained, it is appended to all the JPEG,

RAW, and sRAW images captured thereafter. Before an important shoot, you should update the Dust Delete Data by obtaining it again.

For erasing dust spots automatically with the bundled software, see the

Software Instruction Manual in the CD-ROM.

The Dust Delete Data appended to the image is so small that it hardly affects the image file size.

134

Be sure to use a solid-white object such as a white piece of paper. If the paper has any pattern or design, it may be recognized as dust data and affect the accuracy of the dust deletion with the software.

3

Manual Sensor Cleaning

Dust which could not be removed by the automatic sensor cleaning can be removed manually with a blower, etc.

The surface of the imaging sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon

Service Center is recommended.

Before cleaning the sensor, detach the lens from the camera.

1

Select [Sensor cleaning].

Under the [7] tab, select [Sensor

cleaning], then press <0>.

2

Select [Clean manually].

Turn the <5> dial to select [Clean

manually], then press <0>.

3

Select [OK].


X In a moment, the mirror will lockup and the shutter will open.

“CLn” will blink on the top LCD panel.

4

End the cleaning.

Set the power switch to <2>.

For the power source, using the AC Adapter Kit ACK-E4 is recommended.

If you use a battery, make sure it is fully recharged.

135

3 Manual Sensor Cleaning

While cleaning the sensor, never do any of the following. If the power is cut off, the shutter will close and the shutter curtains and imaging sensor might get damaged.

• Set the power switch to <2>.

• Remove/insert the battery.

The surface of the image sensor is extremely delicate. Clean the sensor with care.

Use a plain blower without any brush attached. A brush can scratch the sensor.

Do not insert the blower tip inside the camera beyond the lens mount. If the power is turned off, the shutter will close and the shutter curtains or reflex mirror might get damaged.

Never use canned air or gas to clean the sensor. The blowing force can damage the sensor or the spray gas can freeze on the sensor.

136

Direct Printing from the Camera/

Digital Print Order Format

You can connect the camera directly to a printer and print out the images in the memory card.

The camera is compatible with “wPictBridge” which is the standard for direct printing.

You can also specify any images in the memory card to be printed.

(p.147)

About DPOF

DPOF (Digital Print Order Format) is a standard for recording printing instructions (image selections, quantity to print, etc.) in the memory card. In this way, you can print multiple pictures in one batch or give the print order to a photofinisher.

Canon’s PictBridge Web Site

The Web site below gives more information on using your

Canon camera with various printers, such as which paper types to use.

http://canon.com/pictbridge/

137

Preparing to Print

You do the direct printing procedure entirely with your camera while you look at the LCD monitor.

Connecting the Camera to a Printer

1


<2>.

2

Set up the printer.

For details, see the printer’s instruction manual.

3

Connect the camera to the printer.

Use the interface cable that came with the camera.

When connecting the cable plug to the camera’s <D> terminal, the cable plug’s <D> icon must face the front side of the camera.

To connect to the printer, refer to the printer’s instruction manual.

4

Turn on the printer.

5


<1>.

X Some printers may make a beeping sound.

138

w PictBridge

Preparing to Print

6

Playback the image.

Press the <x> button.

X The image will appear, and the <w> icon will appear on the upper left to indicate that the camera is connected to a printer.

The camera cannot be used with printers compatible only with CP Direct or Bubble Jet Direct.

When connecting the camera to the printer, do not use any cable other than the interface cable provided.

If there is a long beeping sound in step 5, it indicates a problem with the

PictBridge printer. To find out what’s wrong, do the following:

Press the <x> button to playback the image and follow the steps below.

1. Press <0>.

2. On the print setting screen, select [Print].

The error message will be displayed on the LCD monitor. (p.144)

If you use a battery to power the camera, make sure it is fully charged.

With a fully charged battery, printing up to about 7 hours is possible.

Before disconnecting the cable, turn off the camera and printer first. Pull out the cable while holding the plug, not the cord.

For direct printing, using AC Adapter Kit ACK-E4 (optional) to power the camera is recommended.

139

wPrinting

The screen display and setting options will differ depending on the

printer. Some settings might not be available. For details, see the printer’s instruction manual.

Printer-connected icon 1

Select the image to be printed.

Check that the <w> icon is displayed on the upper left of the LCD monitor.

Turn the <5> dial to select the image to be printed.

2

Press <0>.

X The print setting screen will appear.

Print setting screen

Sets the printing effects.

Sets the date or file number imprinting to on or off.

Sets the quantity to be printed.

Sets the trimming area.

Sets the paper size, type, and layout.

Returns to step 1.

Starts the printing.

The paper size, type, and layout you have set will be displayed.

* Depending on the type of printer, the date and file number imprinting, trimming, and other settings might not be available.

3

Select [Paper settings].

Turn the <5> dial to select [Paper

settings], then press <0>.

X The Paper settings screen will appear.

140

wPrinting

QSetting the Paper Size

Turn the <5> dial to select the size of the paper loaded in the printer, then press <0>.

X The Paper type screen will appear.

YSetting the Paper Type

Turn the <5> dial to select the type of the paper loaded in the printer, then press <0>.

When using a Canon printer and Canon paper, read the printer’s instruction manual to check what paper types can be used.

X The Page layout screen will appear.

USetting the Page Layout

Turn the <5> dial to select the page layout, then press <0>.

X The print setting screen will reappear.

Bordered

Borderless

Borderedc xx-up

20-upc

35-upp

The print will have a white border along the edges.

The print will have no white borders. If your printer cannot print borderless prints, the print will have borders.

The shooting information* will be imprinted on the border on

9x13cm and larger prints.

Option to print 2, 4, 8, 9, 16, or 20 images on one sheet.

On A4 / Letter size paper, 20 or 35 thumbnails of the images ordered through DPOF will be printed.

• [20-upc] will have the shooting information* printed on the side of each thumbnail and the file number and date** printed on the bottom of each thumbnail image.

• [35-upp] will have the file number and date** printed on the bottom of the thumbnail images.

The page layout will vary depending on the printer type or its settings.

Default

* From the Exif data, the camera name, lens name, shooting mode, shutter speed, aperture, exposure compensation amount, ISO speed, white balance, etc., will be imprinted.

** This depends on the date/file number imprinting option set in step 5 (p.143).

141

wPrinting

4

Set the printing effects.

Set as necessary. If you need not set any printing effects, go to step 5.

The screen display may differ depending on the printer.

Turn the <5> dial to select the item on the upper right, then press <0>.

If the <e> icon is displayed next to

<z>, the printing effects can also be adjusted. (p.145)

Next, turn the <5> dial to select the desired printing effect, then press <0>.

EOff

EOn

EVivid

ENR

Item

EVivid+NR

EFacek

Description

Same as the printing characteristics turned “On”. No automatic correction will be performed.

The image will be printed according to the printer’s standard colors.

The image’s Exif data is used to make automatic corrections.

The image will be printed with higher saturation to produce more vivid blues and greens.

The image noise is reduced before printing.

Vivid and NR are applied before printing.

Effective in backlit conditions which can make the subject’s face look dark. The face will be brightened for printing.

ERed-Eye1

Effective in flash images where the subject has red eye. The red eye is corrected before printing.

0 B/W Prints in black-and-white with true blacks.

0 Cool tone Prints in black-and-white with cool, bluish blacks.

0 Warm tone Prints in black-and-white with warm, yellowish blacks.

z Natural

Prints the image in the actual colors and contrast. No automatic color adjustments will be applied.

z Natural M

The printing characteristics are the same as the “Natural” setting. However, this setting enables finer printing adjustments than with “Natural.”

EDefault

The printing will differ depending on the printer. For details, see the printer’s instruction manual.

142

wPrinting

5

Set the date and file number imprinting.

Set as necessary.

Turn the <5> dial to select , then press <0>.


6

Set the number of copies.

Set as necessary.

Turn the <5> dial to select < R >, then press <0>.

Turn the <5> dial to select the number of copies, then press <0>.

7

Start printing.

Turn the <5> dial to select [Print], then press <0>.

X The printing will start.

You can also print RAW and sRAW images taken by the camera.

For details on trimming, see page 146.

The [Default] setting for printing effects and other options are the printer’s own default settings as set by the printer’s manufacturer. See the printer’s instruction manual to find out what the [Default] settings are.

Depending on the image’s file size and recording quality, it may take some time for the printing to start after you select [Print].

After the [Do not disconnect cable] message disappears, you can disconnect the cable even during printing.

To stop the printing, press <0> while [Stop] is displayed, then select

[OK].

143

wPrinting

Handling Printer Errors

If you resolve a printer error (no ink, no paper, etc.) and select [Continue] to resume printing but it does not resume, operate the buttons on the printer to resume printing. For details, see the printer’s instruction manual.

Error Messages

If a problem occurs during printing, an error message will appear on the camera’s LCD monitor. Press <0> to stop printing. After resolving the problem, resume printing. For details on how to resolve a printing problem, refer to the printer’s instruction manual.

Paper error

Ink error

: Check whether the paper is properly loaded in the printer.

: Check the printer’s ink level, and check the waste ink tank.

Hardware error : Check for any printer problems other than paper and ink problems.

File error : The selected image cannot be printed via PictBridge.

Images taken with a different camera or images edited with a computer might not be printable.

144

wPrinting

e Adjustment of Printing Effects

In step 4 on page 142, select the printing effect. When the <e> icon is displayed next to <z>, press the button. You can then adjust the printing effect. What can be adjusted or what is displayed will depend on the selection made in step 4.

Brightness

The image brightness can be adjusted.

Adjust levels

When you select [Manual], you can change the histogram’s distribution and adjust the image’s brightness and contrast.

With the Adjust levels screen displayed, press the button to change the position of the <h>. Turn the <5> dial to freely adjust the shadow level (0 - 127) or highlight level (128 - 255).

kBrightener

Effective in backlit conditions which can make the subject’s face look dark. When [On] is set, the face will be brightened for printing.

Red-eye corr.

Effective in flash images where the subject has red eye. When [On] is set, the red eye will be corrected for printing.

When [Detail set.] is selected, you can adjust the [Contrast],

[Saturation], [Color tone], and [Color balance]. To adjust the [Color

balance], use <9>. B is for blue, A is amber, M is magenta, and G is green. The color will shift in the respective direction.

When you select [Clear all], all the printing effect settings will be reverted to the default.

145

wPrinting

Trimming the Image

You can crop the image and print only the trimmed portion as if the image was recomposed. Do the trimming right

before printing. If you set the trimming and then set the print settings, you may have to set the trimming again.

1

On the print setting screen, select [Trimming].

2

Set the trimming frame size, position, and proportion.

The image area within the trimming frame will be printed.

Changing the trimming frame size

When you press the or <y> button, the size of the trimming frame will change. The smaller the trimming frame, the larger the image magnification will be for the printing.

Moving the trimming frame

Use <9> to move the frame over the image vertically or horizontally. Move the trimming frame until it shows the desired image area or composition.

Rotating the frame

Each time you press the button, the trimming frame will toggle between the vertical and horizontal orientations. This enables you to create a vertical-oriented print from a horizontal image.

3

Press <0> to exit the trimming.

X The print setting screen will reappear.

You can check the trimmed image area on the upper left of the print setting screen.

Depending on the printer, the trimmed image area might not be printed as you specified.

The smaller you make the trimming frame, the grainier the picture will look on the print. If the picture will be too grainy, the trimming frame will turn red.

While trimming the image, look at the camera’s LCD monitor. If you look at the image on a TV screen, the trimming frame might not be displayed accurately.

146

The shape of the trimming frame can be changed with [Paper settings].

W Digital Print Order Format (DPOF)

Set the print type, date imprinting, and file No. imprinting. The print settings will be applied to all print-ordered images. (They cannot be set individually for each image.)

Set the Printing Options

1

Select [Print order].

X Under the [3] tab, select [Print

order], then press <0>.

2

Select [Set up].

Turn the <5> dial to select [Set up], then press <0>.

[ Print type ]

3

Set the options as desired.

Set the [Print type], [Date], and [File

No.].

Turn the <5> dial to select the option, then press <0>.


[ Date ] [ File No.

]

147


Print type

Date

File No.

K

L

Standard

Index

Prints one image on one sheet.

Multiple, thumbnail images are printed on one sheet.

K

L

Both

On

Off

On

Off

Prints both the standard and index prints.

[On] imprints the recorded date on the print.

[On] imprints the file No. on the print.

4

Exit the menu.

Press the <7> button.

X The Print order screen will reappear.

Next, select [Sel.Image], [Byn], or

[All image] to order the images to be printed.

Even if [Date] and [File No.] are set to [On], the date or file No. might not be imprinted depending on the print type setting and printer model.

When printing with DPOF, you must use the memory card whose print order specifications have been set. It will not work if you just extract images from the memory card and try to print them.

Certain DPOF-compatible printers and photofinishers might not be able to print the photos as you specified. If this happens with your printer, refer to the printer’s instruction manual. Or check with your photofinisher about compatibility when ordering prints.

Do not insert into the camera a memory card whose print order was set by a different camera and then try to specify a print order. The print order may not work or may be overwritten. Also, depending on the image type, the print order may not be possible.

148

RAW and sRAW images cannot be selected for print orders.

With [Index] prints, both the [Date] and [File No.] cannot be set to [On] at the same time.


Print Ordering

Sel.Image

Quantity

Check mark

Total images selected

Index icon

Select and order images one by one.

Press the <y> button to display the three-image view. To return to the singleimage display, press the button.

After completing the print order, press the <M> button to save the print order to the memory card.

[Standard] [Both]

Press <0> and a print order for 1 copy of the displayed image will be placed.

Then turn the <5> dial to set the number of copies (up to 99) to be printed for that image.

[Index]

Press <0>, and the displayed image will be included in the index print. The <X> icon will also appear on the upper left.

Byn

Select Mark all and select the folder. A print order for 1 copy of all the images in the folder will be placed. If you select Clear all and a folder, the print order for all the images in the folder will be canceled.

All image

If you select Mark all, a print order for 1 copy of all the images in the memory card will be placed. If you select Clear all, the print order for all the images in the card will be canceled.

Note that RAW and sRAW images will not be included in the print order even when you set “All image.”

When using a PictBridge printer, print no more than 400 images for one print order. If you specify more than this, all the images might not be printed.

149

W Direct Printing with DPOF

With a PictBridge printer, you can easily print images with DPOF.

1

Preparing to print.

See page 138.

Follow the “Connecting the Camera to a Printer” procedure up to step 5.

2

Under the [3] tab, select [Print order].

3

Select [Print].

[Print] will be displayed only if the camera is connected to the printer and printing is possible.

4

Set the [Paper settings].

(p.140)

Set the printing effects (p.142) as necessary.

5

Select [OK].

Before printing, be sure to set the paper size.

Certain printers cannot imprint the file No.

If [Bordered] is set, the date might be imprinted on the border, depending on the printer.

Depending on the printer, the date might look light if it is imprinted on a bright background or on the border.

150

Under [Adjust levels], [Manual] cannot be selected.

If you stopped the printing and want to resume printing the remaining images, select [Resume]. Note that printing will not resume if you stop the printing and any of the following occurs:

• Before resuming, you changed the print order or erased any images selected for the print order. For index printing, you changed the paper settings before resuming the printing. Or the memory card’s remaining space was small when the printing was stopped.

If a problem occurs during printing, see page 144.

Transferring Images to a Personal Computer

You can use the camera to select images in the memory card and transfer them directly to a personal computer.

If the computer software

(EOS DIGITAL Solution Disk

CD-ROM) provided with the camera has been installed in your personal computer, you can easily transfer the images without operating the personal computer.

For instructions to install the provided software, see the separate sheet, “CD-ROM Guide.”

If you want to operate the personal computer to transfer the images from the camera, see the “Software Instruction Manual” in the CD-ROM.

151

d Transferring Images to a Personal Computer

Before connecting the camera to the personal computer, be sure to first install the EOS DIGITAL Solution Disk software (in the

CD-ROM provided with the camera) in the personal computer.

Preparation for Image Transfer

1

Connect the camera to the personal computer.

Turn off the camera’s power switch before connecting it.

Use the interface cable that came with the camera.

When connecting the cable plug to the camera’s <D> terminal, the cable plug’s <D> icon must face the front side of the camera.

To the personal computer’s USB port, connect the plug on other end of the cable.

2


<1>.

When the program selection screen appears on the personal computer, select [EOS Utility]. When the camera model selection screen appears, select your camera’s model.

X The [EOS Utility] screen will appear on the computer, and the Direct transfer screen will appear on the camera’s LCD monitor.

While the Direct transfer screen is displayed, pressing the shutter button halfway will not return the camera to shooting-ready.

152

If the [EOS Utility] screen does not appear, see “Software Instruction

Manual” in the CD-ROM.

Before disconnecting the cable, turn off the camera first and pull out the cable by grasping the plug (instead of the cord).


Transferring Images to a Personal Computer

The images transferred to the personal computer will be organized according to the shooting date and saved in the [My

Pictures] folder for Windows or the

[Pictures] folder in the Macintosh.

All images

All the images in the memory card will be transferred.

New images

Images which have not yet been transferred to the personal computer will be selected by the camera automatically and transferred.

Transfer order images

You select the images and they are transferred to the personal computer in a batch. (p.154)

Select & transfer

You select the images individually to be transferred. Press <0> and the displayed image will be transferred. To exit, press the <M> button.

Wallpaper

Select an image and press <0>. The displayed image will then be transferred and appear as wallpaper on the computer’s desktop screen. To exit, press the <M> button.

During the image transfer, do not disconnect the interface cable.

RAW and sRAW images cannot be transferred as wallpaper.

153


3 Selecting the Images to be Transferred

Under the [3] tab, you can use [Transfer

order] to select the images to be transferred to a personal computer.

When you select [Transfer order images] on the preceding page, you can transfer the images set by the transfer order.

Sel.Image

Select and order images one by one.

Press <0> to include the displayed image in the transfer order. The <X> icon will also appear on the upper left.

After completing the transfer order, press the <M> button to save the transfer order to the memory card.

Byn

Select Mark all and select the folder. All the images in the folder will then be included in the transfer order. If you select Clear all and a folder, the transfer order for all the images in the folder will be canceled.

All image

When you select Mark all, all the images in the memory card will be included in the transfer order. If you select Clear all, the transfer order for all the images in the card will be canceled.

Do not put into the camera any images whose transfer order was set by a different camera and then try to specify another transfer order. The images in the transfer order might all be overwritten. Also, depending on the image type, the transfer order may not be possible.

154

For the transfer order, if you select an image captured in the RAW+JPEG or sRAW+JPEG, it will be counted as one image. During the direct image transfer, both the RAW/sRAW and JPEG images will be transferred to the personal computer.

If you want to transfer more than 999 images in one batch, select [All

image] on the direct transfer screen.

Customizing the Camera and

Saving Camera Settings

To suit your shooting preferences, you can change the camera’s functions and also save the camera settings to a memory card. The saved settings can also be registered to the camera.

155

3

Setting Custom Functions

1

Select [8].

Turn the <6> dial to select the [8] tab.

2

Select the group.

Turn the <5> dial to select C.Fn I -

IV, then press <0>.

Custom Function No.

3

Select the Custom Function No.

Turn the <5> dial to select the

Custom Function No., then press

<0>.

4

Change the setting as desired.

Turn the <5> dial to select the setting (number), then press <0>.

Repeat steps 2 to 4 if you want to set other Custom Functions.

At the bottom of the screen, the current Custom Function settings are indicated below the respective numbers.

5

Exit the setting.

Press the <M> button.

X The screen for step 2 will reappear.

Clearing All Custom Functions

In step 2, select [Clear all Custom Func. (C.Fn)] to clear all the

Custom Function settings.

156

Even after all the Custom Functions are cleared, the setting for C.Fn IV -11

[Focusing Screen] will remain intact.

3 Setting Custom Functions

Custom Functions


1 Exposure level increments

2 ISO speed setting increments

3 Set ISO speed range

4 Bracketing auto cancel

5 Bracketing sequence

6 Number of bracketed shots

7 Spot metering link to AF point

8 Safety shift

9 Select usable shooting modes

10 Select usable metering modes

11 Exposure mode in manual exposure

12 Set shutter speed range

13 Set aperture value range

14 Apply shooting/metering mode

15 Flash sync. speed in Av mode

C.Fn III: Auto focus/Drive

1 USM lens electronic MF

2 AI Servo tracking sensitivity

3 AI Servo 1st/2nd image priority

4 AI Servo AF tracking method

5 Lens drive when AF impossible

6 Lens AF stop button function

7 AF Microadjustment

8 AF expansion with selected point

9 Selectable AF point

10 Switch to registered AF point

11 AF point auto selection

12 AF point display during focus

13 AF point brightness

14 AF-assist beam firing

15 Mirror lockup

16 Continuous shooting speed

17 Limit continuous shot count

C.Fn II: Image/Flash exposure/Display C.Fn IV: Operation/Others

1 Long exposure noise reduction

2 High ISO speed noise reduction

3 Highlight tone priority

4 E-TTL II flash metering

5 Shutter curtain sync.

6 Flash firing

7 Viewfinder info. during exposure

8 LCD panel illumination during Bulb

9 INFO button when shooting

The Custom Functions whose numbers are shaded do not function during Live View shooting. (Settings are disabled.)

1 Shutter button/AF-ON button

2 AF-ON/AE lock button switch

3 Quick Control Dial in metering

4 SET button when shooting

5 Tv/Av setting for Manual exposure

6 Dial direction during Tv/Av

7 Av setting without lens

8 WB + media/image size setting

9 H button function

10 Button function when 5 <OFF>

11 Focusing Screen

12 Timer length for timer

13 Shortened release time lag

14 Add aspect ratio information

15 Add original decision data

16 Live View exposure simulation

157

3

Custom Function Settings

The Custom Functions are organized in four groups based on the function type: C.Fn I: Exposure, C.Fn II: Image/Flash exp (exposure)/

Disp (Display), C.Fn III: Auto focus/Drive, C.Fn IV: Operation/Others.

Note that the Custom Function numbers differ from previous

EOS-1D-series cameras.


C.Fn I -1 Exposure level increments

0: 1/3-stop set 1/3-stop compensation

1: 1-stop set 1/3-stop compensation

Sets full-stop increments for the shutter speed and aperture.

2: 1/2-stop set 1/2-stop compensation

Sets 1/2-stop increments for the shutter speed, aperture, and exposure compensation.

C.Fn I -2 ISO speed setting increments

0: 1/3 stop

1: 1-stop

C.Fn I -3 Set ISO speed range

Disable: The settable ISO speed range will be 100 - 3200.

Enable: The settable ISO speed will range from the highest ISO speed to the lowest ISO speed set with [Register].

Register: The highest ISO speed can be registered within 100 to H (6400), and the lowest ISO speed can be registered within L (50) to

3200. After entering the settings, select [Apply].

If the highest ISO speed H (6400) and the lowest ISO speed L (50) are registered, it will be the same as “ISO speed expansion.”

158

3 Custom Function Settings

C.Fn I -4 Bracketing auto cancel

0: On

The AEB and WB-BKT settings will be canceled when the power switch is set to <2> or the camera settings are cleared. AEB will also be canceled when bulb exposure is set or the flash is ready to fire.

1: Off

The AEB and WB-BKT settings will be retained even when the power switch is set to <2>. (When the flash is ready, AEB will be canceled.

However, the AEB amount will be retained in memory.)

C.Fn I -5 Bracketing sequence

The AEB shooting sequence and white balance bracketing sequence can be changed.

0: 0, - , +

1: -, 0, +

2: +, 0, -

AEB

B/A Direction

WB bracketing

M/G Direction

0 : Standard exposure 0 : Standard white balance 0 : Standard white balance

- : Decreased exposure - : More blue - : More magenta

+ : Increased exposure + : More amber + : More green

C.Fn I -6 Number of bracketed shots

The number of shots taken with AEB and white balance bracketing can be changed from the usual 3 shots to 2, 5, or 7 shots. When C.Fn I -5-0 is set, the bracketed shots will be taken as shown in the table below.

0: 3 shots

1: 2 shots

2: 5 shots

3: 7 shots (1-stop increments)

1st shot 2nd shot 3rd shot 4th shot 5th shot 6th shot 7th shot

0: 3 shots Standard (0) -1 +1

1: 2 shots Standard (0)



-1

-2

-3

-1

-2

+1

-1

+2

+1 +2 +3

159


C.Fn I -7 Spot metering link to AF point

0: Disable (use center AF point)

1: Enable (use active AF point)

Enables spot metering linked to the selected AF point. With automatic

AF point selection, spot metering will be at the viewfinder center.

C.Fn I -8 Safety shift

0: Disable

1: Enable (Tv/Av)

This works in the shutter-priority AE (Tv) and aperture-priority AE (Av) modes. When the subject’s brightness changes erratically and the correct autoexposure cannot be obtained, the camera will change the exposure setting automatically to obtain a correct exposure.

2: Enable (ISO speed)

This works in the Program AE, shutter-priority AE, and aperture-priority

AE modes. When the subject’s brightness changes erratically and the correct autoexposure cannot be obtained, the camera will change the

ISO speed within 100 - 3200 automatically to obtain a correct exposure.

Even if the settable ISO speed range has been changed with C.Fn I -

3,12/13, the safety shift will override it when necessary to obtain the correct exposure.

With settings 1 and 2, safety shift also works with flash.

C.Fn I -9 Select usable shooting modes

Disable: All the shooting modes (a, s, f, d, Bulb) will be selectable.

Enable: Only the shooting modes set with [Register] will be selectable.

Register: To make a shooting mode unselectable, uncheck the checkmark

<X>. After entering the settings, select [Apply].

C.Fn I -10 Select usable metering modes

Disable: All the metering modes (q: Evaluative, w: Partial, r: Spot, e : Center-weighted average) will be selectable.

Enable: Only the metering modes set with [Register] will be selectable.

Register: To make a metering mode unselectable, uncheck the checkmark

<X>. After entering the settings, select [Apply].

160


C.Fn I -11 Exposure mode in manual exposure

You can set the metering mode to be used in the manual exposure mode.

0: Specified metering mode

1: Evaluative metering

2: Partial metering

3: Spot metering

4: Center-weighted average

With settings 1 to 4, you cannot change the metering mode by pressing the

<Q> button during shooting.

C.Fn I -12 Set shutter speed range

Disable: The settable shutter speed range will be 1/8000 sec. to 30 sec.

Enable: The settable shutter speed will range from the highest shutter speed to the lowest shutter speed set with [Register].

Register: The highest shutter speed can be registered within 1/8000 sec. to 1/250 sec., and the lowest shutter speed can be registered within 30 sec. to 1/60 sec. After entering the settings, select

[Apply].

C.Fn I -13 Set aperture value range

Disable: The settable aperture will range from the camera-attached lens’ maximum aperture to minimum aperture.

Enable: The settable aperture will range from the smallest to largest aperture set with [Register].

Register: The smallest aperture can be registered within f/1.4 to f/91, and the largest aperture can be registered within f/1.0 to f/64. After entering the settings, select [Apply].

161


C.Fn I -14 Apply shooting/metering mode

While holding down the <A> (AE lock) button, you can switch to the registered setting (shooting mode, metering mode, shutter speed, aperture, or exposure compensation).

Disable: Pressing the <A> button will lock the exposure (AE lock).

Enable: By holding down the <A> button, you can instantly switch to the registered setting.

Register: Set the desired setting for the AE lock button: shooting mode, metering mode, shutter speed, aperture, or exposure compensation.

When you select [Register], [With AE lock button (AF on/AF

off)] will be displayed where you can set the AE lock button to also execute AF or not. Select [AF on/AF off] to register the setting to the camera.

C.Fn I -15 Flash sync. speed in Av mode

0: Auto

1: 1/300 sec. (fixed)

Sets the flash sync speed to 1/300 sec. in the aperture-priority AE (Av) mode. (Against dark backgrounds such as the night sky, the subject’s background will look dark.)

162


C.Fn II: Image/Flash exposure/Display

C.Fn II -1 Long exposure noise reduction

0: Off

1: Auto

For 1 sec. or longer exposures, noise reduction is performed automatically if noise typical of long exposures is detected. This [Auto] setting is effective in most cases.

2: On

Noise reduction is performed for all exposures 1 sec. or longer. The [On] setting may be effective for noise that cannot be detected or reduced with the [Auto] setting.

With setting 2, if a long exposure is made during Live View shooting, the

LCD monitor will not display anything (no Live View image display) while noise reduction is applied. During the noise reduction process, shooting is possible. However, you will not be able to see anything on the LCD monitor and in the viewfinder. Since you cannot check the focus and picture composition, shooting is not recommended during the noise reduction process.

With setting 1 and 2, after the picture is taken, the noise reduction process may take the same amount of time as the exposure. During the noise reduction, shooting is still possible as long as the maximum burst indicator in the viewfinder shows “1” or higher.

C.Fn II -2 High ISO speed noise reduction

0: Off

1: On

Reduces the noise generated in the image. Although noise reduction is applied at all ISO speeds, it is particularly effective at high ISO speeds.

At low ISO speeds, the noise in the shadow areas is further reduced.

With setting 1, the maximum burst for continuous shooting will greatly decrease.

163


C.Fn II -3 Highlight tone priority

0: Disable

1: Enable

Improves the highlight detail. The dynamic range is expanded from the standard 18% gray to bright highlights. The gradation between the grays and highlights becomes smoother.

With setting 1, noise in the shadow areas may be slightly more than usual.

With setting 1, the settable ISO speed range will be 200 - 3200. Also, the ISO speed displayed on the top LCD panel and in the viewfinder, will have the “0” displayed as a smaller character such as “2oo”. When the image’s shooting info (p.117) is displayed, the ISO speed’s “0” will also be displayed as a smaller character.

C.Fn II -4 E-TTL II flash metering

0: Evaluative flash metering

Fully automatic flash photography for all conditions, from low light to daylight fill-flash.

1: Average flash metering

The flash is averaged for the entire area covered by the flash. Since automatic flash exposure compensation will not be executed, you may have to set it yourself depending on the scene. This also applies if you use FE lock.

C.Fn II -5 Shutter curtain sync.

0: 1st-curtain synchronization

1: 2nd-curtain synchronization

The flash fires right before the shutter closes. When a slow shutter speed is set, you can capture a light trail following the subject.

This Custom Function can be used to obtain 2nd-curtain sync effects even with EX-series Speedlites which do not have this feature. If the EX-series

Speedlite has this feature, it will override this Custom Function’s setting.

(Set it with the Speedlite.)

With setting 1, a preflash will be fired for flash metering control right after you press the shutter button completely. Remember that the main flash will then fire right before the shutter closes.

164


C.Fn II -6 Flash firing

Enables or disables the firing of an external flash or non-Canon flash connected to the PC terminal.

0: Enable

1: Disable

Convenient when you want to use the external flash’s AF-assist beam only. Note that whether or not the AF-assist beam is emitted is dependent on the C.Fn III -14 setting.

C.Fn II -7 Viewfinder info. during exposure

0: Disable

1: Enable

The viewfinder information will be displayed even during an exposure. Displays the exposure setting, number of remaining shots, etc., during continuous shooting.

C.Fn II -8 LCD panel illumination during Bulb

0: Off

1: On during Bulb

If the LCD panel’s illumination is on (p.102) and you take a bulb exposure, the illumination will continue until the bulb exposure ends.

This is convenient when you are taking a bulb exposure in low light and want to check the exposure time.

C.Fn II -9 INFO button when shooting

What is displayed on the LCD monitor when you press the button when the camera is ready to shoot can be changed.

0: Displays camera settings

Displays the camera settings. (p.186)

1: Displays shooting functions

Displays shooting functions as found on the top LCD panel and in the viewfinder. When the display is on, you can still press the <S> button and select the AF point on the LCD monitor.

This is convenient when it is difficult to set the camera settings while viewing the top LCD panel, when you are shooting straight up, or when the camera position or point of focus is fixed and you only want to change the camera settings during shooting.

165


C.Fn III: Auto focus/Drive

C.Fn III -1 USM lens electronic MF

USM lens electronic MF can be enabled or disabled for when you use any of the following lenses.

EF50mm f/1.0L USM, EF85mm f/1.2L USM, EF85mm f/1.2L II USM,

EF200mm f/1.8L USM, EF300mm f/2.8L USM, EF400mm f/2.8L USM,

EF400mm f/2.8L II USM, EF500mm f/4.5L USM, EF600mm f/4L USM,

EF1200mm f/5.6L USM, or EF28-80mm f/2.8-4L USM

0: Enable after One-Shot AF

After focus is achieved in One-Shot AF, electronic MF is enabled. If C.Fn

IV -1-2, 3 is set, it is also enabled before focus is achieved.

1: Disable after One-Shot AF

After focus is achieved in One-Shot AF, electronic MF is disabled. If

C.Fn IV -1-2, 3 is set, it is possible before focus is achieved.

2: Disable in AF mode

Electronic MF is disabled in the AF mode.

C.Fn III -2 AI Servo tracking sensitivity

During focusing in the AI Servo AF mode, the AF sensitivity for tracking subjects (or obstacles) moving into AF points can be set to one of five levels.

If it is set toward [Slow], interruptions by any obstacles will be less disruptive. It makes it easier to keep tracking the target subject.

If it is set toward [Fast], it will be easier to focus any subjects which suddenly enter the picture from the side. Convenient when you want to successively photograph multiple subjects located at random distances.

C.Fn III -3 AI Servo 1st/2nd image priority

For the AI Servo AF and continuous shooting modes, you can change the

Servo’s operation characteristics and shutter-release timing.

0: AF priority/Tracking priority

For the first shot, focusing the subject is given priority. For the 2nd and following shots during continuous shooting, focus-tracking of the subject is given priority.

166


1: AF priority/Drive speed priority

For the first shot, focusing the subject is given priority. During continuous shooting, the continuous shooting speed is given priority over the focustracking of the subject.

2: Release/Drive speed priority

For the first shot, shutter release is given priority over focusing the subject. During continuous shooting, the continuous shooting speed is given priority more than with setting 1.

C.Fn III -4 AI Servo AF tracking method

In the AI Servo AF mode while you are focus-tracking a subject, the camera can either continue focusing the target subject even if a closer subject

(closer than at the main focus point) suddenly appears in the picture, or the camera can switch to focus the closer subject.

*Main focus point = With automatic AF point selection: Center AF point

With manual AF point selection + AF point expansion

(C.Fn III -8-1/2): Manually-selected AF point

0: Main focus point priority

The active AF point will switch to the main AF point and start focusing the closer subject. Convenient when you always want to focus the closest subject.

1: Continuous AF track priority

Any closer subject appearing in the picture will be ignored as an obstruction. The main focus point does not take priority, so the tracking of the target subject can continue and switch to an adjacent AF point based on the preceding focusing result. Convenient when obstacles such as telephone poles go in front of the target subject.

C.Fn III -5 Lens drive when AF impossible

If autofocus is executed, but focus cannot be achieved, the camera can either keep trying to focus or stop.

0: Focus search on

1: Focus search off

Prevents the camera from becoming grossly out of focus as it attempts to focus again. Especially convenient with super telephoto lenses which can become extremely out of focus.

167


C.Fn III -6 Lens AF stop button function

0: AF stop

1: AF start

AF operates only while the button is pressed. While the button is pressed, AF operation with the camera is disabled.

2: AE lock

When the button is pressed, AE lock is applied. Convenient when you want to focus and meter at different parts of the picture.

3: AF point: M 9 Auto/Auto 9 ctr

In the manual AF point selection mode, the button instantly switches to automatic AF point selection (among 45 AF points) while you hold it down. Convenient when you are no longer able to focus track a moving subject with a manually-selected AF point in the AI Servo AF mode. You can instantly switch from manual to automatic AF point selection mode.

In the automatic AF point selection mode, the button selects the center

AF point only while you hold it down.

4: ONE SHOT z AI SERVO

In the One-Shot AF mode, the camera switches to AI Servo AF mode only while you hold down the button. And in the AI Servo AF mode, the camera switches to One-Shot AF mode only while you hold down the button.

Convenient when you need to keep switching between One-Shot AF and AI Servo AF for a subject which keeps moving and stopping.

5: IS start

With the lens’ IS switch already <ON>, the Image Stabilizer operates when you press the button.

6: Switch to registered AF point

While holding down the AF Stop button, press the button to switch to the registerd AF point. If you do the same procedure again, the camera will return to the original AF point.

The AF stop button is provided only on super telephoto IS lenses.

With setting 5, the Image Stabilizer will not operate when you press the shutter button halfway.

To register the AF point, see page 171.

168


C.Fn III -7 AF Microadjustment

Normally, this adjustment is not required. Do this adjustment only if necessary. Note that doing this adjustment may prevent correct focusing from being achieved.

You can make fine adjustments of the AF’s point of focus. It can be adjusted in ±20 steps

(-: Forward / +: Backward).

The adjustment amount of one step varies depending on the maximum aperture of the lens. Adjust, shoot, and check the focus.

Repeat to adjust the AF’s point of focus.

With setting 1 or 2 selected, press the button to view the register screen. To cancel all the registered adjustments, press the <L> button.

0: Disable

1: Adjust all by same amount

The same adjustment amount is applied to all lenses.

2: Adjust by lens

An adjustment can be set individually for any particular lens. Adjustments for up to

20 lenses can be registered in the camera.

When a lens whose focus adjustment has been registered is attached to the camera, its point of focus will be shifted accordingly.

If adjustments for 20 lenses have already been registered and you want to register an adjustment for another lens, select a lens whose adjustment can be overwritten or deleted.

When you adjust, shoot, and check the focus to make the adjustment, set the image size to JPEG Large and the JPEG quality (compression) to 8 or higher.

It is best to make the adjustment at the actual place to be photographed.

This will make the adjustment more precise.

With setting 2, if an extender is used, the adjustment will be registerd for the lens and extender combination.

With settings 1 and 2, you can check the adjustment amount on the camera settings screen (p.186). Also, when you display the image’s shooting information (p.117), you can see the adjustment amount.

The registered AF microadjustments will be retained even if you use the Custom

Function to clear all settings (p.156). However, the setting itself will be [0: Disable].

169


C.Fn III -8 AF expansion with selected point

In the AI Servo AF or One-Shot AF mode with manual AF point selection, you can increase the number of AF points by using the Assist AF points.

Effective when it is difficult to track a moving subject with just one AF point.

0: Disable

1: Enable (left/right Assist AF points)

The points on the immediate left and right (or top and bottom for a vertical shot) of the user-selected AF point become active.

2: Enable (surrounding Assist AF points)

The points immediately surrounding the user-selected AF point become active.

The AF point expansion centers on the selected AF point. Therefore, if a peripheral AF point is selected, the AF point expansion will be smaller as shown below.

Assist AF point expanded by 1 point on left and right Assist AF point expanded by 1 point all around

Selected AF point Expansion points

Even when C.Fn III -9-1/2 is set, the expansion will take effect.

C.Fn III -9 Selectable AF point

0: 19 points

1: Inner 9 points

The user-selectable AF points will be limited to the inner 9 points.

2: Outer 9 points

The user-selectable AF points will be limited to the outer 9 points.

With settings 1 and 2, the selectable AF points and the selection pattern will be as shown below:

Inner 9 points Outer 9 points

170


C.Fn III -10 Switch to registered AF point

You can instantly switch to the registered AF point with the <9> while the metering timer is active.

0: Disable

1: Enable

By pressing the <9>, you can switch to the registered AF point. Press the button again to return to the original AF point.

Registering the AF point (Multiple AF points can not be registered.)

You can register the AF point you use frequently.

1. Select the AF point to be registered. (p.84)

2. While holding down the <S> button, press the <Z> button.

• HP : Automatic selection, SEL [ ] : Center AF point,

SEL HP : Off-center AF point

If you change the C.Fn III -9 setting, the registered AF point is canceled. The camera will switch to the center AF point.

C.Fn III -11 AF point auto selection

For AF point selection, you can enable or disable automatic selection.

The setting before the slash (/) applies to the <5> dial’s function with C.Fn

IV -3-1 set. And the setting after the slash applies to the <6> dial’s function when the <S> button is pressed.

0: 5direct:disable/6:enable

When metering is active, the <5> dial cannot select automatic selection. You can select automatic selection with <6>.

1: 5direct:disable/6:disable

Automatic selection cannot be selected.

2: 5direct:enable/6:enable

When metering is active, the <5> dial can select automatic selection.

You can select automatic selection with <6>.

C.Fn III -12 AF point display during focus

0: On

1: Off

The AF point will not light in red other than during AF point selection.

2: On (when focus achieved)

The manually selected AF point will not dimly light during autofocusing.

(The AF point will light only when AF is started or focus is achieved.)

171


C.Fn III -13 AF point brightness

0: Normal

1: Brighter

Makes the AF point light up brighter in red.

C.Fn III -14 AF-assist beam firing

Enables or disables the EOS-dedicated Speedlite’s AF-assist beam.

0: Enable

The external Speedlite will emit the AF-assist beam when necessary.

1: Disable

C.Fn III -15 Mirror lockup

See page 104 for the mirror lockup procedure.

0: Disable

1: Enable

2: Enable: Down with SET (button)

With setting 1 and 2, the <2> icon will appear on the top LCD panel.

C.Fn III -16 Continuous shooting speed

Disable: Continuous shooting will be enabled: <o>: Approx. 10 fps,

: Approx. 3 fps

Enable: The continuous shooting speed set with [Register] will be enabled.

Register: <o> can be set within 2 fps to 10 fps, and can be set within 1 fps to 9 fps. After entering the settings, select [Apply].

C.Fn III -17 Limit continuous shot count

Disable: No limit is set on the continuous shot count. (Continuous shooting will be possible up to the maximum burst indicated.)

Enable: The continuous shooting will be limited to the number set with

[Register] after which the shooting will stop automatically.

Register: The continuous shot count can be limited to 2 to 99. After entering the settings, select [Apply].

172


C.Fn IV: Operation/Others

C.Fn IV -1 Shutter button/AF-ON button

0: Metering + AF start

1: Metering + AF start/AF stop

During autofocusing, you can press the button to stop the autofocusing.

2: Metering start/Meter + AF start

This is useful for subjects which keep moving and stopping repeatedly.

In the AI Servo AF mode, you can press the button to repeatedly start or stop the AI Servo AF operation. The exposure is set at the moment the picture is taken. Thus, the optimum focusing and exposure will always be achieved as you wait for the decisive moment.

3: AE lock/Metering + AF start

Convenient when you want to focus and meter at different parts of the picture. Press the button to meter and autofocus, and press the shutter button halfway to attain AE lock.

4: Metering + AF start / disable

The button will not function.

C.Fn IV -2 AF-ON/AE lock button switch

0: Disable

1: Enable

The functions of the and <A/y> buttons will be switched with each other’s function.

C.Fn IV -3 Quick Control Dial in metering

The Quick Control Dial’s function while the metering is active can be changed.

0: Exposure compensation/Aperture

1: AF point selection

You can select the AF point directly with the <5> dial without first pressing the <S> button. While metering is active, turning the <5> dial will select a horizontal AF point. Automatic selection cannot be selected. However, if

C.Fn III -11-2 has also been set, automatic selection can be selected.

Press the <O> button and turn the <6/5> dial to set the aperture for exposure compensation or manual exposure.

2: ISO speed

While metering is active, you can turn the <5> dial to change the ISO speed in real-time.

173


C.Fn IV -4 SET button when shooting

You can assign a frequently-used function to <0>. When the camera is ready to shoot, you can press <0>.

0: Normal (disabled)

1: White balance

While looking at the rear LCD panel, you can change the WB.

2: Image size

While looking at the rear LCD panel, you can change the memory card and image size.

3: ISO speed

While looking at the top LCD panel or in the viewfinder, you can change the ISO speed.

4: Picture Style

The [1 Picture Style] menu will appear.

5: Record func. + media/folder

The [5 Record func+media/folder sel.] menu will appear.

6: Menu display

Gives the same function as the <M> button.

7: Image playback

Gives the same function as the <x> button.

If the [Live View shoot.] menu has been set to [Enable], the Live View shooting will override any setting from 1 to 7 above. Pressing <0> will show the Live View image instead.

C.Fn IV -5 Tv/Av setting for Manual exposure

0: Tv=6/Av=5

1: Tv=5/Av=6

Convenient when you use studio flash and frequently change the aperture. Also, when you use AEB in the manual exposure mode, the shutter speed can stay fixed while only the aperture is shifted for AEB.

The shutter speed can also be set by pressing the <O> button and turning the <6/5> dial.

174


C.Fn IV -6 Dial direction during Tv/Av

0: Normal

1: Reverse direction

The dial’s turning direction for setting the shutter speed and aperture can be reversed.

In the manual exposure mode, the direction of the <6> and <5> dials will be reversed. In other shooting modes, the <6> dial will be reversed.

The direction of the <5> dial will be the same in the manual exposure mode and for setting exposure compensation.

C.Fn IV -7 Av setting without lens

0: Disable

1: Enable

You can set the aperture setting with the camera even when a lens is not attached. Convenient especially if you use a super telephoto lens with more than one EOS-1D Mark III camera body.

C.Fn IV -8 WB + media/image size setting

When you press the button to set the white balance, memory card, or image size, you can choose to do it with the rear LCD panel or with the menu screen.

0: Rear LCD panel

1: LCD monitor

When you press the button, the menu screen will appear. Each time you press the button, the screen will change for the White balance,

Image size, and Record func+media/folder sel.

Even with setting 1, if you press the button during Live View shooting, you can set the settings above while looking at the rear LCD panel.

C.Fn IV -9 H button function

0: Protect (holding:sound rec.)

Press the <H> button for 2 sec. and the sound recording will start.

1: Sound rec. (protect:disable)

To start the sound recording, press the <H> button. To protect an image, use the [3 Protect images] menu.

175


C.Fn IV -10 Button function when 5 <OFF>

0: Normal (enable)

1: Disable 6,5,Multi-controller

When the power switch is set to <1>, the <6>, <5>, and <9> will be disabled from setting anything. The shutter button can still be used to shoot. This prevents any settings to be changed inadvertently, so it is convenient when you keep shooting with the same settings.

Even with setting 1, if the power switch is set to <J>, you can use <6>,

<5>, and <9> to change settings.

C.Fn IV -11 Focusing Screen

If you change the focusing screen, change this setting to match the focus screen type. This is to obtain the correct exposures.

0: lEc-C IV

Standard focusing screen (Laser-matte).

1: lEc-A, B, C, C II, C III, D, H, I, L

For Laser-matte screens.

2: pEc-S

For Super Precision Matte screens.

3: kEc-N,R

For New Laser-matte screens.

The pEc-S focusing screen is optimized for lenses whose maximum aperture is f/1.8 to f/2.8. If the lens maximum aperture is brighter than f/1.8, the center spot metering circle and Area AF ellipse might become difficult to see.

Also, if the lens maximum aperture is slower than f/2.8, the viewfinder will look darker.

Even if all the Custom Functions are cleared, this setting will be retained.

Since the Ec-A, Ec-B, Ec-I, and Ec-L focusing screens have a prism at the center, correct exposures cannot be obtained with evaluative metering and center spot metering. Use either center-weighted average metering or AF point-linked spot metering (except the center AF point).

To change the focusing screen, refer to the instructions that came with the focusing screen.

176


C.Fn IV -12 Timer length for timer

You can change how long the function settings remain in effect after you let go of the respective button.

Disable: The timer length is set to the default.

Enable: The timer length is set to the time set with [Register].

Register: You can set the 6-sec. and 16-sec. timer length and the timer length for after the shutter release. The timer length can be set to

0 sec. to 59 sec. or 1 min. to 60 min. After entering the settings, select [Apply].

• 6-sec. timer: Works with the metering while you shoot through the viewfinder. Also works when you press the

<A> button for AE lock.

• 16-sec. timer: Works when you press the button for multi-spot metering and FE lock. Also works during Live View shooting for metering and pressing the <A> button for AE lock.

• Timer after release: Normally, the timer is 2 sec. after the picture is taken. A longer timer length will make it easier to use AE lock at the same exposure.

C.Fn IV -13 Shortened release time lag

Normally, stabilization control is executed for the shutter-release time lag.

This stabilization control can be omitted to make the shutter-release time lag shorter.

0: Disable

1: Enable

When the aperture is stopped down to no more than 3 stops from the maximum aperture, the shutter-release time lag will be as much as about 20% shorter than normal.

177


C.Fn IV -14 Add aspect ratio information

During Live View shooting, vertical lines corresponding to the aspect ratio will be displayed. You can thereby simulate framing for medium- and largeformat film sizes such as 6x6 cm, 6x4.5 cm, and 4x5 in.

This aspect ratio information will be appended automatically to the captured image. (The image will not actually be saved to the memory card as a cropped image.) When the image is transferred to a personal computer and the Digital Photo Professional (provided software) is used, the image will be displayed in the aspect ratio you specified.

0: Off 4: Aspect ratio 6:7

1: Aspect ratio 6:6





Aspect ratio information will also be appended when you shoot through the finder.

During image playback on the camera, vertical lines for the respective ratio will be displayed.

C.Fn IV -15 Add original decision data

0: Off

1: On

Data for verifying whether the image is original or not is appended to the image automatically. When the shooting info of an image appended with the verification data is displayed (p.117), the <L> icon will appear.

To verify whether the image is original, the Original Data Security Kit

OSK-E3 (optional) is required.

C.Fn IV -16 Live View exposure simulation

0: Disable (LCD auto adjust)

1: Enable (simulates exposure)

During Live View shooting, the real-time picture shows the brightness corresponding to the exposure setting. This enables you to check the image’s exposure right before you take the picture.

Even if 1 is set, the exposure simulation will not be displayed when an external flash is used nor during bulb exposures.

178

3

Registering and Applying Custom Function Settings

You can register up to three sets of Custom Function settings.

You can register a different set of Custom Function settings for different shooting situations such as sports, snapshots, and landscapes.

You can then instantly apply a registered set of Custom Function settings.

Registering Custom Function Settings

1

Select [C.Fn setting register/ apply].

Under the [8] tab, select [C.Fn

setting register/apply], then press

<0>.

2

Select [Register].

X Turn the <5> dial to select

[Register], then press <0>.

3

Select [Set].

Turn the <5> dial to select [Set *], then press <0>.

4

Select [OK].


X The Custom Function settings will be registered under [Set *], and the

Custom Function settings will be displayed in a list. To return to the screen in step 2, press <0>.

179

3 Registering and Applying Custom Function Settings

The settings for C.Fn III -7 [AF Microadjustment] and C.Fn IV -11

[Focusing Screen] will not be included in the registered Custom Function settings.

To view the registered Custom Function settings, select [Confirm settings].

The numbers of options changed from the default setting are displayed in blue.

If the option’s settings include [Disable/Enable/Register] and it is set to

[Enable], a blue [ * ] will be displayed. (A blue [ * ] will also be displayed if the C.Fn III -2 setting has been changed.)

Applying Custom Function Settings

In step 2, select [Apply] and select the [Set *] of the Custom Function settings to be applied. Select [OK], and the Custom Function settings will switch to those registered under Set *.

180

3

Registering My Menu

Sample By registering the menu items and

Custom Functions which you change frequently, you can access and change them quickly with My Menu.

You can register the top layer of items under each menu tab and any Custom

Function. You can register up to six items in My Menu.

Registering My Menu Items

1

Select [My Menu settings].

Under the [9] tab, select [My Menu

settings], then press <0>.

2




3

Select an item.

Turn the <5> dial to select the item, then press <0>.

4

Select [OK].


X The selected item will be registered in

My Menu.

To register more items, repeat steps 3 and 4.

To return to the screen in step 2, press the <M> button.

181

3 Registering My Menu

Deleting My Menu Items

In step 2, select [Delete], then select the item to be deleted. To delete all the My Menu items, select [Delete all items].

Start Display with My Menu

In step 2, select [Display from My Menu], and set [Enable]. With the camera ready for shooting, press the <M> button and My Menu will be displayed first.

Sorting My Menu Items

In step 2, select [Sort]. Select the item to be sorted. With the [z] icon displayed on the right of the item, turn the <5> dial to shift the item’s position. Then press <0>.

You can also register My Menu items from the provided software.

3

Saving and Loading Camera Settings

The camera’s shooting modes, Custom Functions, and other camera settings can be saved in the memory card as a camera settings file. When this file is loaded by the camera, the saved camera settings will be applied.

Convenient when you want to load the camera settings from a different

EOS-1D Mark III body and set the camera in the same way. Or you can save and load different camera settings for different shooting situations.

Saving Camera Settings

1

Select [Save/load settings on media].

Under the [7] tab, select [Save/load

settings on media], then press

<0>.

182

3 Saving and Loading Camera Settings

2

Select [Save].

Turn the <5> dial to select [Save], then press <0>.

3

Select [Start].

Turn the <5> dial to select [Start], then press <0>.

X The camera settings will be saved to the memory card, and the screen in step 2 will reappear.

If you select [Change file name], you can change the file name (8 characters) and save the file.

(For the procedure, see “Changing the File Name” on page 77. The number of characters which can be entered will be different, but the procedure for entering the file name is the same.)

Loading camera settings

In step 2, select [Load]. Up to 10 camera settings files saved in the memory card will be displayed. When you select the desired file, it will be loaded and the settings will be applied to the camera.

Settings for the date/time, language, video system, C.Fn III -7 and

C.Fn IV -11 will not be saved in the file.

Up to 10 camera settings files can be saved in a memory card. If the memory card already has 10 camera settings files, you can either overwrite the existing file or use another card.

183

3

Registering Basic Camera Settings

You can set the basic settings for major functions such as the shooting mode, AF mode, metering mode, and drive mode and register them in the camera.

This is convenient when you want to instantly switch to frequently-used shooting settings.

Registering Basic Settings

1

Select [Regist/apply basic settings].

Under the [7] tab, select [Regist/

apply basic settings], then press

<0>.

2




3

Select a function.

Turn the <5> dial to select the function, then press <0>.

You can set the shooting mode, white balance, drive mode, metering mode,

AF mode, AF point, color space, image size, and Picture Style (9).

4

Set the function as desired.


5

Exit the setting.

To exit the setting and return to the screen in step 2, press the <M> button.

Applying Basic Settings

In step 2, select [Apply]. The camera settings will switch to the registered settings.

184

Reference

This chapter provides reference information for camera features, system accessories, etc. The back of this chapter also has an index to make it easier to look up things.

185

Camera Settings & Battery Information

B Camera Settings

When the camera is ready to shoot, you can press the button to view the function settings on the LCD monitor.

Display the camera settings.

Press the button.

Picture Style (p.57)

Picture Style parameters (p.58)

Color space (p.72)

WB correction (p.70)/

BKT setting (p.71)

File name setting (p.77)

Shots remaining on CF card and SD card (p.53)

Date/Time (p.46)

Auto rotate display (p.130)

AF microadjustment (p.169)

186

If C.Fn II -9-1 is set, shooting functions will be displayed. (p.165)

Camera Settings & Battery Information

3 Battery Info.

You can check the battery’s condition on a menu screen.

Select [Battery info.].

Under the [6] tab, select [Battery

info.], then press <0>.

Designation of the battery being used or household power source.

Remaining battery level displayed by the battery check display (p.29) in 1% increments.

Shots taken with the current battery.

The number is reset when the battery is recharged.

Battery’s performance level is displayed in one of three levels. (p.27)

(Green): Battery performance is fine.

(Green): Battery performance is slightly degraded.

(Red): Replacing the battery is recommended.

If “Calibration is recommended when charging battery next time” is displayed at the bottom of the LCD monitor, see page 28.

If for some reason, communication with the battery is not successful, the battery check display will show <c> on the top LCD panel and the viewfinder. When you check the battery info, [Cannot communicate

with battery] will be displayed. However, shooting will still be possible.

If you use any battery other than Battery Pack LP-E4, the camera might not attain its full performance. It may also cause camera malfunction.

Using Battery Pack LP-E4 is recommended.

187

Replacing the Date/Time Battery

The date/time (back-up) battery’s service life is about 5 years. If the date/time dialog appears when the battery pack is replaced, replace the lithium CR2025 battery with a new one.

The date/time setting will also be reset, so be sure to set the correct date/time.

1

Set the power switch to <2> and remove the battery pack.

The back-up battery is on the ceiling of the battery compartment.

2

Remove the back-up battery cover.

Use a small screwdriver to loosen the screw and remove the cover.

Be careful not to lose the cover and screw.

3

Remove the battery.

(+) 4

Install a new back-up battery.

The plus side of the battery must face up.

5

Attach the cover.

188

Program Line

The following program line applies when the camera is in Program AE

<d> mode.

ISO 100

200

400

800

1600

3200

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

4

32

22

3

2

16

1

11

0

8

5.6

-1

-2

4

-3

2.8

2

-4

-5

EV

30 15 8 4 2 1 2 4 8 15 30 60 125 250 500

1.4

1.0

1000 2000 4000 8000

Shutter speed

Understanding the Program Line

The lower horizontal axis represents the shutter speed, and the right-hand vertical axis represents the aperture.

The combinations of shutter speed and aperture automatically determined by

Program AE are shown as lines with respect to the subject brightness

(Exposure Value) levels on the left and top edges of the graph.

Using an EF50mm f/1.4 USM lens with a subject brightness of EV12, the point where the diagonal line from EV12 (on the top edge) intersects the Program AE line represents the corresponding shutter speed (1/320 sec.) and aperture

(f/3.5) that the program sets automatically. The diagonal arrowed lines at the upper left indicate the metering range for each ISO speeds.

189

Troubleshooting Guide

If there is a problem, first refer to this Troubleshooting Guide. If this

Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center.

Power

The battery cannot be recharged with the battery charger provided.

To prevent mishaps, the battery charger cannot recharge any battery other than Battery Pack LP-E4.

The camera does not operate even when the power switch is

set to <1>.

The battery is not properly installed in the camera. (p.29)

Make sure the memory card slot cover is closed. (p.32)

If the top LCD panel does not display the camera settings, recharge the battery. (p.26)

The access lamp remains on even when the power switch is

set to <2>.

The images are still being recorded to the memory card. After the image is finished recording to the memory card, the access lamp turns off and the camera turns off automatically.

The battery becomes exhausted quickly.

Use a fully-charged battery. (p.26)

The battery performance might have degraded. See the [6 Battery

info.] menu to check the battery’s performance level (p.187). If the battery performance is poor, replace the battery with a new one.

The camera turns off by itself.

Auto power off is in effect. If you do not want auto power off to take effect, set the [5 Auto power off] menu to [Off].

190

Troubleshooting Guide

Shooting

No images can be shot or recorded.

The memory card is not properly inserted. (p.32)

If the memory card is full, replace the card or delete unnecessary images to make room.

Or if a not-full memory card is inserted in the other card slot, switch the recording to that card. (p.32, 73, 128)

If you try to focus in the One-Shot AF mode while the focus confirmation light <o> in the viewfinder blinks, a picture cannot be taken. Press the shutter button halfway again to focus, or focus manually. (p.36, 86)

The LCD monitor does not display a clear image.

If dust is adhering to the LCD monitor, wipe with a lens cloth or soft cloth.

In low or high temperatures, the LCD monitor display may seem slow or it might look black. It will return to normal at room temperature.

The image is out of focus.

On the lens, set the focus mode switch to <f>. (p.35)

To prevent camera shake, hold the camera still and press the shutter button gently. (p.36, 40)

The memory card is unusable.

If a memory card error message is displayed, see page 48 or 193.

191

Troubleshooting Guide

Live View shooting is not possible.

When using Live View shooting, use a memory card (a hard disk-type

CF card such as MicroDrive is not recommended). A hard disk-type

CF card requires a lower temperature range for operation than with normal memory cards. If the temperature gets too high, the Live View shooting may stop temporarily to prevent damage to the card’s hard disk. When the camera’s internal temperature decreases, the Live

View shooting will be able to resume. (p.109)

Image Review & Operation

The image cannot be erased.

If the image has been erase-protected, it cannot be erased. (p.123)

The shooting date and time displayed is incorrect.

The correct date and time has not been set. (p.46)

No image appears on the TV screen.

Make sure the video cable plug is connected all the way in. (p.122)

Set the video OUT format (NTSC/PAL) to the same video format as the TV. (p.44)

Use the video cable that came with the camera. (p.122)

192

Error Codes

Error code

Countermeasures

If there is a problem with the camera, an error message appears. Follow the instructions displayed.

To recover from the error, press the shutter button halfway, turn the power switch

<2> and <1>, or remove and reinstall the battery.

If error 02 (memory card problem) is displayed, remove and reinstall the memory card or format the card. This may resolve the problem.

If the same error keeps appearing, there may be a problem. Write down the error code and consult your nearest Canon Service

Center.

193

System Map

ST-E2 220EX 430EX 580EX II

Macro Ring Lite

MR-14EX

Macro Twin Lite

MT-24EX

Dioptric Adjustment

Lenses Eg

Bundled

Accessories

Anti-Fog

Eyepiece Eg

Eyecup Eg

Wide Strap L6

USB cable protector

Angle Finder C

Hand Strap E1

CR2025 lithium battery

EOS DIGITAL

Solution Disk

Software Instruction

Manual

Battery Pack LP-E4

Focusing

Screen Ec

194

AC Adapter Kit

ACK-E4 Battery Charger

LC-E4

Car Battery

Cable CB-570

System Map

Timer Remote

Controller

TC-80N3

Remote

Switch

RS-80N3

Wireless

Controller

LC-5

Canon EF lenses

Video Cable

VC-100

Wireless File

Transmitter

WFT-E2/WFT-E2A

TV/Video

USB external media

USB GPS unit Interface Cable

IFC-200U

Interface Cable

IFC-500U

Original Data Security

Kit OSK-E3

Card reader

CF card

SD memory card

PCMCIA adapter

Wireless LAN access point Wireless LAN adapter

Ethernet port

USB port

PC card slot

Personal computer

Windows Vista

Windows XP

Windows 2000

Mac OS X

PictBridge-compatible printer

195

Specifications

• Type

Type:

Recording media:

Image sensor size:

Compatible lenses:

Lens mount:

Digital, single-lens reflex, AF/AE camera

Type I or II CF card, SD memory card

* MicroDrive, 2GB or higher capacity

* With Wireless File Transmitter WFT-E2/E2A attached, recording possible with USB external media

28.1 x 18.7 mm

Canon EF lenses (except EF-S lenses)

(35mm-equivalent focal length is approx.1.3 times the lens focal length)

Canon EF mount

• Imaging Element

Type:

Pixels:

High-sensitivity, high-resolution, large single-plate CMOS sensor

Effective pixels: Approx. 10.10 megapixels

Total pixels: Approx. 10.70 megapixels

Aspect ratio:

Color filter system:

3:2

RGB primary color filter

Low-pass filter: Located in front of the image sensor, non-removable

Dust deletion feature: (1) Automatic sensor cleaning

(2) User-activated sensor cleaning

(3) Dust Delete Data appended to the captured image

• Recording System

Recording format:

Image type:

Design rule for Camera File System 2.0

JPEG, RAW (14bit)

RAW+JPEG simultaneous recording: Provided (sRAW+JPEG also possible)

File size: (1) L (Large) : Approx. 3.5 MB (3888 x 2592 pixels)

(2) M1 (Medium1) : Approx. 2.8 MB (3456 x 2304 pixels)

(3) M2 (Medium2) : Approx. 2.1 MB (2816 x 1880 pixels)

(4) S (Small) : Approx. 1.2 MB (1936 x 1288 pixels)

(5) RAW

(6) sRAW

: Approx. 13.0 MB (3888 x 2592 pixels)

: Approx. 7.6 MB (1936 x 1288 pixels)

Folder setting:

File name:

File numbering:

Color space:

* JPEG quality: 8, ISO 100, Picture Style: Standard

* Exact file sizes depend on the subject, JPEG quality,

ISO speed, Picture Style, etc.

Folder creation/selection enabled

Preset code, User setting1 (4 characters), User setting2

(3 characters + 1 image size character)

Consecutive numbering, auto reset, manual reset sRGB, Adobe RGB

196

Specifications

Picture Style:

Recording methods:

Image copy:

Backup:

Standard, Portrait, Landscape, Neutral, Faithful,

Monochrome, User Def. 1 - 3

(1) Standard

(2) Auto switch media (recording media switched automatically)

(3) Rec. separately (specified image size for each recording media)

(4) Rec. to multiple (same image recorded to all recording media)

Image copying between recording media enabled

(Images with checkmarks or all images in folder or card)

With WFT-E2/E2A attached, all images and folders in the CF card and SD card can be backed up to USB external media

• White Balance

Settings:

Auto white balance:

Auto, daylight, shade, cloudy, tungsten light, white fluorescent light, flash, custom (Total 5 settings), color temperature setting, personal white balance (Total 5 settings)

Auto white balance with the image sensor

Color temperature compensation: White balance correction: ±9 stops in full-stop increments

White balance bracketing: ±3 stops in full-stop increments

* Blue/amber direction or magenta/green direction possible

Color temperature information transmission: Provided

• Viewfinder

Type:

Coverage:

Magnification:

Eye-level pentaprism

Approx. 100 percent vertically and horizontally with respect to the effective pixels

0.76x (-1 diopter with 50mm lens at infinity)

Eyepoint: 20mm

Built-in dioptric adjustment: -3.0 - +1.0 diopter

Focusing screen:

Mirror:

Interchangeable (11 types optional), Standard focusing screen: Ec-C IV

Quick-return half mirror (Transmission:reflection ratio of 37:63, no mirror cut-off with EF1200mm f/5.6L USM or shorter lens)

Viewfinder information: AF information (AF points, focus confirmation light), metering and exposure information (metering mode, spot metering circle, shutter speed, aperture, manual exposure, AE lock, ISO speed, exposure level, exposure warning), flash information (flash ready, FP flash, FE lock, flash exposure level), white balance correction, JPEG/RAW recording, maximum burst, number of shots remaining, battery check, recording media information

Depth-of-field preview: Enabled with depth-of-field preview button

Eyepiece shutter: Built-in

197

Specifications

• Autofocus

Type:

AF points:

Metering range:

Focus modes:

AF point selection:

TTL-AREA-SIR with a CMOS sensor

19 AF points (cross-type) and 26 Assist AF points (total 45 points)

EV -1 - 18 (at 23°C/73°F, ISO 100)

One-Shot AF (ONE SHOT), AI Servo AF (AI SERVO),

Manual focusing (MF)

Automatic selection (45 points), manual selection (19 points, 9 inner points, 9 outer points)

Selected AF point display: Superimposed in viewfinder and indicated on top LCD panel

AF-assist beam: Emitted by the dedicated external Speedlite

• Exposure Control

Metering modes:

AE lock:

63-zone TTL full-aperture metering

(1) Evaluative metering (linkable to any AF point)

(2) Partial metering (approx. 13.5% of viewfinder at center)

(3) Spot metering

• Center spot metering (approx. 3.8% of viewfinder at center)

• AF point-linked spot metering (approx. 3.8% of viewfinder)

• Multi-spot metering (Max. 8 spot metering entries)

(4) Center-weighted average metering

Metering range:

Exposure control:

EV 0 - 20 (at 23°C/73°F with EF50mm f/1.4 USM lens, ISO 100)

Program AE (shiftable), shutter-priority AE, aperturepriority AE, manual exposure, E-TTL II autoflash, flash metered manual

ISO speed

(Recommended Exposure Index): 100 - 3200 (1/3-stop increments), expandable to ISO 50 and 6400

Exposure compensation: Manual: ±3 stops in 1/3- or 1/2-stop increments (can be combined with AEB)

AEB: ±3 stops in 1/3- or 1/2-stop increments

Auto: Applied in One-Shot AF mode with evaluative metering when focus is achieved

Manual: By AE lock button in all metering modes

• Shutter

Type:

Shutter speeds:

Shutter release:

Self-timer:

Remote control:

198

Electronically-controlled, focal-plane shutter

1/8000 to 30 sec. (1/3- and 1/2-stop increments), bulb,

X-sync at 1/300 sec. (with EX series Speedlite for EOS cameras)

Soft-touch electromagnetic release

10-sec. or 2-sec. delay

Remote control with N3 type terminal

Specifications

• Drive System

Drive modes: Single, High-speed continuous, Low-speed continuous,

Self-timer (10 sec. and 2 sec), and Silent single shooting

Continuous shooting speed (Approx.):

Max. burst:

High-speed continuous: Max. 10 shots/sec.,

Low-speed continuous: Max. 3 shots/sec.

JPEG (Large): Approx. 110, RAW: Approx. 30,

RAW+JPEG (Large): Approx. 22

* Based on Canon’s testing conditions with a 1GB CF card for high-speed continuous shooting with JPEG quality 8, ISO 100, and Standard Picture Style.

* Varies depending on the subject, memory card brands, imagerecording quality, ISO speed, drive mode, Picture Style, etc.

• External Speedlite

Compatible flash:

Flash metering:

EX-series Speedlites

E-TTL II autoflash

Flash exposure compensation: ±3 stops in 1/3- or 1/2-stop increments

FE lock: Provided

External flash settings: Flash function settings, Flash C.Fn settings

PC terminal: Provided

Zooming to match lens focal length: Provided

• Live View Functions

Shooting modes:

Focusing:

(1) Remote Live View shooting

(with a personal computer installed with EOS Utility)

(2) Live View shooting

Manual focus

Metering modes:

Metering range:

Magnified view:

Grid display:

Evaluative metering with the imaging sensor

EV 0 - 20 (at 23°C/73°F with EF50mm f/1.4 USM lens, ISO 100)

Magnifiable by 5x or 10x at AF point

Provided

Exposure simulation: Provided

• LCD Monitor

Type:

Monitor size:

Pixels:

Coverage:

TFT color liquid-crystal monitor

3.0 in.

Approx. 230,000

100%

Brightness adjustment: 7 levels provided

Interface languages: 18

199

Specifications

• Image Playback

Display format:

Highlight alert:

• Image Protection and Erase

Protect:

Erase:

Erase protection of one image, all images in a folder, or all images in the memory card can be applied or canceled at one time

One image, all images with checkmarks in a folder, or all images in the memory card can be erased (except protected images) at one time

• Sound Recording

Recording method:

Single image, single image + image size, shooting info, histogram, 4image or 9-image index, magnified zoom (approx. 1.5x - 10x), rotated image, jump (by 1/10/100 images, 1 screen, shooting date, or folder)

Provided (Overexposed highlights blink)

File type:

Recording time:

The sound clip recorded with the built-in microphone is attached to the image

WAV

Max. 30 sec. per sound clip

• Direct Printing

Compatible printers:

Printable images:

PictBridge-compatible printers

JPEG images compliant to Design rule for Camera File

System (DPOF printing possible) and RAW/sRAW images captured with the EOS-1D Mark III

• Digital Print Order Format

DPOF: Version 1.1 compatible

• Direct Image Transfer

Compatible images: JPEG and RAW/sRAW images

* Only JPEG images can be transferred as wallpaper on the personal computer screen

• Customization

Custom Functions: Total 57

C.Fn setting registration: Provided

My Menu registration: Provided

Save camera settings: Provided

Register basic camera settings: Provided

• Interface

USB terminal:

Video OUT terminal:

For personal computer communication and direct printing

(USB 2.0 Hi-Speed)

NTSC/PAL selectable

200

Specifications

• Power Source

Battery:

Battery life:

Battery check:

Power saving:

Date/Time battery:

Startup time:

Battery Pack LP-E4 (Quantity 1)

* AC power can be supplied via AC Adapter Kit ACK-E4

At 23°C / 73°F: Approx. 2200 shots

At 0°C / 32°F: Approx. 1700 shots

* With fully-charged Battery Pack LP-E4

* Without Live View shooting

* The figures above are based on CIPA (Camera &

Imaging Products Association) testing standards

Automatic (Displayed in 6 levels)

Provided. Power turns off after 1, 2, 4, 8, 15, or 30 min.

One CR2025 lithium battery

Approx. 0.2 sec.

• Dimensions and Weight

Dimensions (W x H x D): 156 x 156.6 x 79.9 mm / 6.1 x 6.2 x 3.1 in.

Weight (Approx.): 1155 g / 40.7 oz. (Body only)

• Operating Environment

Working temperature range: 0°C - 45°C / 32°F - 113°F

Working humidity: 85% or less

• Battery Pack LP-E4

Type:

Rated voltage:

Rechargeable lithium ion battery

11.1 V DC

Battery capacity: 2300mAh

Dimensions (W x H x D): 68.4 x 34.2 x 92.8 mm / 2.7 x 1.3 x 3.7 in.

Weight (Approx.): 180 g / 6.3 oz. (excluding protective cover)

• Battery Charger LC-E4

Type:

Recharging time:

Charger dedicated to the Battery Pack LP-E4

Approx. 120 min. (for 1 pack)

Rated input:

Rated output:

100 - 240 V AC (50/60 Hz)

12 V / 24 V DC

12.6 V DC, 1.55 A

Power cord length: Approx. 2 m / 6.6 ft.

Working temperature: 0°C - 40°C / 32°F - 104°F


Dimensions (W x H x D): 155 x 52.3 x 95 mm / 6.1 x 2.1 x 3.7 in.

Weight (Approx.): 340 g / 12.0 oz. (excluding power cord and protective covers)

201

Specifications

• AC Adapter Kit ACK-E4

[DC Coupler]

Rated input:

Rated output:

12.6 V DC

11.1 V DC

Cord length: Approx. 2.3 m / 7.5 ft.



Dimensions (W x H x D): 68.4 x 34.2 x 92.8 mm / 2.7 x 1.3 x 3.7 in.

Weight (Approx.):

[AC Adapter]

165 g / 5.8 oz. (excluding protective cover)

Rated input:

Rated output:

Power cord length:

100 - 240 V AC (50/60 Hz)

12.6 V DC, 2 A

Approx. 2 m / 6.6 ft.



Dimensions (W x H x D): 64.5 x 32.6 x 106 mm / 2.5 x 1.3 x 4.2 in.

Weight (Approx.): 185 g / 6.5 oz. (excluding power cord)

All specifications above are based on Canon’s testing standards.

The camera’s specifications and exterior are subject to change without notice.

If a problem occurs with a non-Canon lens attached to the camera, consult the lens maker.

202

Image Conversion Factor

Since the image size is smaller than the 35mm film format, it will look like the lens focal length is increased by 1.3x.

Image size

(28.1 x 18.7mm / 1.11 x 0.74 in.)

35mm image size

(36 x 24mm / 1.42 x 0.94 in.)

Trademarks

Adobe is a trademark of Adobe Systems Incorporated.

CompactFlash is a trademark of SanDisk Corporation.

Windows is a trademark or registered trademark of Microsoft Corporation in the United States and other countries.

Macintosh is a registered trademark of Apple Corporation in the United States and other countries.

All other corporate and product names and trademarks mentioned in this manual are the property of their respective owners.

* This digital camera supports Design rule for Camera File System 2.0 and Exif

2.21 (also called “Exif Print”). Exif Print is a standard that enhances compatibility between digital cameras and printers. By connecting to an Exif Print-compliant printer, the shooting information is incorporated to optimize the print output.

203

Digital Camera Model DS126141 Systems

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

The cable with the ferrite core provided with the digital camera must be used with this equipment in order to comply with Class B limits in Subpart B of Part

15 of the FCC rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment.

Canon U.S.A. Inc.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

Tel No. (516)328-5600

This digital apparatus does not exceed the Class B limitsfor radio noise emissions from digital apparatus as set outin the interference-causing equipment standard entitled "Digital Apparatus", ICES-003 of the Industry

Canada.

When connecting to and using a household power outlet, use only AC

Adapter Kit ACK-E4 (rated input: 100-240 V AC 50/60 Hz, rated output:

12.6 V DC). Using anything else can cause fire, overheating, or electrical shock.

204

IMPORTANT SAFETY INSTRUCTIONS

1. SAVE THESE INSTRUCTIONS — This manual contains important safety and operating instructions for Battery Charger LC-E4.

2. Before using the charger, read all instructions and cautionary remarks on

(1) the charger, (2) the battery pack, and (3) the product using the battery pack.

3. CAUTION — To reduce risk of injury, charge only the Battery Pack LP-E4.

Other types of batteries may burst, causing personal injury and other damage.

4. Do not expose the charger to rain or snow.

5. Use of an attachment not recommended or sold by Canon may result in fire, electric shock, or personal injury.

6. To reduce risk of damage to electric plug and cord, pull by plug rather than by cord when disconnecting charger.

7. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.

8. Do not operate the charger with damaged cord or plug - replace them immediately.

9. Do not operate the charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman.

10. Do not disassemble the charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.

11. To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning.

MAINTENANCE INSTRUCTION

Unless otherwise stated in this manual, there are no user serviceable parts inside. Refer servicing to qualified serviceman.

U.S.A. and Canada only:

The Lithium ion/polymer battery that powers the product is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery.

For CA, USA only

Included lithium battery contains Perchlorate Material – special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.

205

Index

Index

A

AC Adapter ...............................23, 31

Access lamp .............................18, 34

Adjust levels..................................145

Adobe RGB.....................................72

AE ...................................................92

AE lock..........................................101

AEB...............................................100

AF ...........................................85, 167

AF microadjustment......................169

AF mode .........................................82

AF point ..........................................84

AF point activation area ................170

AF point brightness.......................172

AF point display ............................118

AF point expansion .......................170

AF point linked ..............................160

AF start (AF-ON).......................82, 83

AF Stop button ..............................173

AF-assist beam.....................107, 172

AI Servo AF ....................................83

AI Servo AF tracking method........167

AI Servo characteristics ................166

Amber (A) ...............................70, 145

Aperture ..........................................96

Aperture value range ....................161

Aperture-priority AE (Av).................96

Apply shooting/metering mode .....162

Area AF ellipse ...............................81

Aspect ratio...................................178

Assist AF points ..............................85

Auto cleaning ................................132

Auto image rotation.......................130

Auto power off.................................47

Auto reset .......................................80

Auto switch media...........................74

Auto white balance .........................63

206

Automatic AF point selection.......... 84

Automatic AF point selection disabled........................................ 171

Av ................................................... 96

AWB ............................................... 63

B

B/W .............................................. 142

B/W image...................................... 58

Backup ........................................... 43

Battery................................ 22, 26, 29

Battery Charger........................ 22, 26

Battery check ......................... 29, 187

Battery compartment cap ............... 29

Battery info. .................................. 187

Beeper...................................... 43, 83

Blue (B) .................................. 70, 145

Borders......................................... 141

Both.............................................. 148

Bracketed shots ........................... 159

Bracketing auto cancel................. 159

Bracketing sequence.................... 159

Brightness .................................... 145

Brightness display ........................ 118

Bulb .............................................. 102

Bulb exposure .............................. 102

Bundled items .................................. 3

Bundled software .................CD-ROM

C

C.Fn ............................................. 158

Calibration ...................................... 28

Camera direct printing.......... 137, 150

Camera setting display................. 186

Camera shooting-ready.................... 4

Camera-assigned name................. 77

Caption (name) .............................. 67

Car battery cable.................... 28, 194

Index

Center-weighted average metering ..........................................91

CF card .........................13, 32, 47, 73

CF card slot.....................................32

Clean manually .............................135

Clean now .....................................132

Clear all camera settings ................49

Clear all Custom Functions...........156

Close-up (macro) photography .....104

Cloudy.............................................63

Color balance................................145

Color saturation.......................59, 145

Color space.....................................72

Color temperature ...........................69

Color tone ...............................59, 145

Compensation for damages..............2

Compression rate............................55

Continuous numbering....................79

Continuous shooting ...............87, 172

Continuous shooting limit..............172

Contrast ..................................58, 145

Cool tone.......................................142

Copying images ............................125

Copyrights.........................................2

Cross-type points ............................85

Custom Function list .....................157

Custom Function setting registration ....................................179

Custom Functions .........................158

Custom WB (white balance) ...........64

Customization ...............................155

D

Date/File number imprinting..........143

Date/time setting .............................46

Daylight ...........................................63

DC coupler ................................23, 31

Default...........................................141

Depth-of-field preview .................... 97

Design rule for Camera File

System ......................................... 203

Difficult-to-focus subjects ............... 86

DIGITAL terminal.................. 138, 152

Direct printing ....................... 137, 150

Direct transfer............................... 151

Discharging .................................... 28

Display entire image..................... 112

Display formats............................. 116

DPOF ........................................... 137

DPP .............................................. 133

Drive mode ..................................... 87

Dust Delete Data .......................... 133

E

EF lenses ....................................... 35

Electronic MF ............................... 166

EOS Utility .................................... 152

Erase ............................................ 128

Erasing all images ........................ 128

Erasing all images in a card ......... 128

Erasing all images in a folder ....... 128

Error codes................................... 193

E-TTL II autoflash......................... 105

E-TTL II flash metering................. 164

Evaluative metering........................ 90

Exif ............................................... 203

Exposure compensation................. 99

Exposure level increments ........... 158

Exposure level indicator ................. 21

Exposure simulation ..................... 178

EX-series Speedlite ...................... 105

Extension system terminal ............. 18

External media ......................... 20, 43

External Speedlite ........................ 105

External Speedlite control............. 106

Eyecup ........................................... 39

207

Index

Eyepiece .........................................17

Eyepiece shutter ...........................103

F

Face brightener.....................142, 145

Faithful ............................................57

FE lock..........................................105

FEB...............................................105

File extension..................................78

File name ........................................77

File number.....................................79

Filter effect ......................................60

Firmware.........................................45

Flash .............................................105

Flash Custom Functions ...............106

Flash exposure compensation......105

Flash function settings ..................106

Flash off ........................................165

Flash sync speed..........................162

Flash use ........................................63

Flash-sync contacts ........................17

Focal plane mark ............................17

Focus adjustment .........................169

Focus confirmation light..................21

Focus lock.......................................83

Focus mode switch ...........35, 86, 110

Focus tracking ................................83

Focusing frame .....................112, 114

Focusing screen ...........................176

Folder (Create/Select) ....................75

Format ......................................47, 49

4- or 9-image index display...........119

FP flash.........................................105

G

Green (G)................................70, 145

Grid display...................................114

H

Hand strap...................................... 24

Handling Precautions ..................... 12

Hard disk (CF card)................ 34, 109

High ISO speed noise reduction .. 163

Highlight alert ............................... 118

Highlight tone priority ................... 164

High-speed continuous shooting.... 87

High-speed sync .......................... 105

Histogram............................. 114, 118

Hold.............................................. 129

Holding the camera ........................ 40

Horizontal-line sensitive ................. 85

Hot shoe......................................... 17

Household power outlet ........... 23, 31

I

ICC profile ...................................... 72

Image area ................................... 202

Image browsing (Jump display) ... 119

Image processing........................... 54

Image protect ............................... 123

Image-recording quality.................. 52

Image review time ........................ 129

Image size...................................... 52

Image size automatic appending ... 78

Image transfer .............................. 151

Index ............................................ 148

Index display ................................ 119

INFO............................. 114, 117, 186

Interface cable...................... 138, 152

ISO speed ...................................... 56

ISO speed increments.................. 158

ISO speed range (extension) ....... 158

J

JPEG.............................................. 52

JPEG quality .................................. 55

208

Index

Jump by 1 screen..........................119

Jump by 1/10/100 images.............119

Jump by date ................................119

Jump by folder ..............................119

Jump display .................................119

L

Landscape ......................................57

Language ........................................46

Large...............................................52

LCD brightness .............................129

LCD monitor....................................13

LCD panel ...........................13, 19, 20

LCD panel illumination ..................102

Lens ..........................................13, 35

Live View shooting ........................110

Long exp. noise reduction.............163

Low level format..............................49

Low-speed continuous shooting .....87

M

M (Manual)......................................98

Macro photography .......................104

Magenta (M)............................70, 145

Magnified view ......................112, 120

Magnified view starting position ....120

Main Dial .....................................4, 37

Malfunction....................................190

Manual AF point selection...............84

Manual exposure (M) ......................98

Manual focusing..............................86

Manual reset ...................................80

Maximum burst .........................53, 54

Medium ...........................................52

Memory card (CF/SD)...13, 32, 47, 73

Memory card slot cover...................32

Menu Settings .................................43

Menus .......................................41, 43

Metering mode ............................... 90

MF .................................................. 86

Mirror lockup......................... 104, 172

Monochrome .................................. 58

Multi-controller............................ 4, 38

Multi-spot metering......................... 91

My Menu....................................... 181

N

Name (Caption) .............................. 67

Natural.......................................... 142

Neutral............................................ 57

New images.................................. 153

19 points/9 points (inner/outer)..... 170

Noise reduction ............................ 163

Nomenclature ................................. 16

Non-Canon flash .......................... 108

NR ................................................ 142

NTSC...................................... 44, 122

O

One-Shot AF .................................. 82

Original decision

(image verification) data ............... 178

Overwrite ...................................... 127

P

P (Program).................................... 92

Page layout .................................. 141

PAL......................................... 44, 122

Paper settings .............................. 140

Partial metering .............................. 90

PC terminal................................... 108

Personal white balance .................. 63

PictBridge ..................................... 137

Picture Style ............................ 57 - 62

Playback....................................... 116

Playback menu......................... 41, 43

Portrait............................................ 57

209

Index

Possible shots...................30, 53, 114

Power cord..........................22, 26, 31

Power source......................26, 31, 47

Power Switch ..................................36

Pressing completely........................36

Pressing halfway.............................36

Print copies ...........................143, 149

Print Order (DPOF).......................137

Print settings .................................140

Printer errors.................................144

Printing effects ......................142, 145

Program AE (P) ..............................92

Program Line ................................189

Program shift ..................................93

Protect ..........................................123

Protect all images .........................123

Protecting all images in a card......123

Protecting all images in a folder....123

Protective cover ..............................26

Q

Quick Control Dial.................4, 17, 38

R

RAW .........................................52, 54

RAW(sRAW)+JPEG........................52

Rear LCD panel ........................13, 20

Rec. separately...............................74

Rec. to multiple ...............................74

Recharge ........................................26

Recording func................................74

Recording media

(CF/SD cards)...............13, 32, 47, 73

Red-eye corr. ................................145

Red-Eye1......................................142

Reduction......................................120

Registering basic camera settings .........................................184

210

Release time lag .......................... 177

Remote control terminal ............... 103

Remote Live View shooting.......... 109

Remote Switch ............................. 103

Replacing the date/time battery ... 188

RGB display ................................. 118

Rotate................................... 121, 130

S

Safety shift ................................... 160

Safety Warnings ............................. 10

Saving camera settings................ 182

SD card ........................ 13, 32, 47, 73

SD card slot.................................... 32

Select all images .................. 149, 154

Select card ..................................... 73

Select usable metering modes..... 160

Select usable shooting modes ..... 160

Self Cleaning Sensor Unit ............ 131

Self-timer........................................ 88

Sensor cleaning ........... 131, 132, 135

Sepia .............................................. 60

Set................................................ 179

SET button ................................. 4, 41

SET button when shooting ........... 174

Set-up menu............................. 41, 44

Shade............................................. 63

Sharpness ...................................... 58

Shoot w/o card ............................... 43

Shooting information display ........ 117

Shooting menus ....................... 41, 43

Shooting mode ............................... 19

Shutter button................................. 36

Shutter curtain sync. .................... 164

Shutter speed................................. 94

Shutter speed range..................... 161

Shutter-priority AE (Tv) .................. 94

Index

Silent single shooting ......................87

Single image .........................149, 154

Single image display .....................116

Single image erase .......................128

Single image playback ..................116

Single image protection ................123

Single shooting ...............................87

Skip ...............................................127

Small ...............................................52

Software instruction manual .................................CD-ROM

Sound clip .....................................124

Sound recording............................124

Specifications................................196

Speedlite .......................................105

Spot metering..................................90

sRAW........................................52, 54 sRGB ..............................................72

Standard............................57, 74, 148

Strap ...............................................24

Style ................................................57

Subject tracking sensitivity............166

Superimposed display...................171

System Map ..................................194

T

Temperature increase ...................109

Timer.................................................4

Timer length ..................................177

Toning effect....................................60

Top LCD panel ..........................13, 19

Trademarks...................................203

Transfer all images .......................153

Transfer order ...............................154

Transfer order images...................153

Trimming .......................................146

Tungsten light .................................63

Tv ....................................................94

Type I/II........................................... 33

U

Underscore............................... 72, 76

User Defined ............................ 58, 61

V

Vertical............................................ 39

Vertical- and horizontal-line sensitive .................. 85

Vertical Shooting ............................ 39

Vertical-line sensitive...................... 85

Video cable........................... 122, 195

Video OUT.............................. 44, 122

Viewfinder....................................... 21

Vivid.............................................. 142

W

Wallpaper ..................................... 153

Warm tone.................................... 142

WAV.............................................. 124

WB (white balance) ........................ 63

WB-BKT ......................................... 71

Web site ....................................... 137

WFT.................................... 20, 43, 45

White balance................................. 63

White balance bracketing ............... 71

White balance correction................ 70

Wireless, Multiple-Speedlite

System ......................................... 105

X xx-up............................................. 141

211

CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

U.S.A.

CANADA

EUROPE,

AFRICA &

MIDDLE EAST

CANON U.S.A. INC.

One Canon Plaza, Lake Success, NY 11042-1198, U.S.A.

For all inquires concerning this product, call toll free in the U.S.

1-800-OK-CANON

CANON CANADA INC. HEADQUARTERS

6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada

CANON CANADA INC. MONTREAL BRANCH

5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada

CANON CANADA INC. CALGARY OFFICE

2828, 16th Street, N.E. Calgary, Alberta T2E 7K7, Canada

For all inquiries concerning this product, call toll free in Canada

1-800-OK-CANON

CANON EUROPA N.V.

Bovenkerkerweg 59-61, P.O. Box 2262, 1180 EG Amstelveen, The Netherlands

CANON COMMUNICATION & IMAGE FRANCE S.A.S.

12 Rue de l’Industrie 92414 Courbevoie Cedex, France

CANON UK LTD.

Woodhatch Reigate Surrey RH2 8BF, United Kingdom

CANON DEUTSCHLAND GmbH

Europark Fichtenhain A10, 47807 Krefeld, Germany

CANON ITALIA S.p.A.

Via Milano 8 I-20097 San Donato Milanese, Milano, Italy

CANON Schweiz AG

Geschäftsbereich Wiederverkauf, Industriestrasse 12, CH-8305 Dietlikon, Switzerland

CANON GMBH

Zetschegasse 11, A-1230 Wien, Austria

CANON España, S. A.

C/Joaquín Costa, 41, 28002 Madrid, Spain

SEQUE Soc. Nac. de Equip., Lda.,

Praça da Alegria, 58, 2°, 1269-149 Lisboa, Portugal

ASIA

CENTRAL & CANON LATIN AMERICA, INC.

SOUTH AMERICA 703 Waterford Way, Ste. 400 Miami, FL 33126, U.S.A.

CANON (China) Co., Ltd.

15F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China

CANON HONGKONG CO., LTD.

19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong

CANON SINGAPORE PTE. LTD.

1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632

CANON KOREA CONSUMER IMAGING INC.

Startower Bldg.17F,737,Yeoksam-Dong, Kangnam-Ku, Seoul, 135-984, Korea

OCEANIA

JAPAN

CANON AUSTRALIA PTY. LTD.

1 Thomas Holt Drive, North Ryde, N.S.W. 2113, Australia

CANON NEW ZEALAND LTD.

Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand

CANON MARKETING JAPAN INC.

16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan

This Instruction Manual booklet is current as of February 2007. For information on the camera’s compatibility with any accessories and lenses introduced after this date, contact any Canon Service Center.

CT1-1014-000 © CANON INC. 2007 PRINTED IN JAPAN

Canon EOS 1D Mark III Instruction manual

INSTRUCTION

MANUAL

Thank you for purchasing a Canon product.

Take a few test shots to familiarize yourself with the camera

Test the Camera Before Using

Copyrights

2

Item Check List

3

Conventions Used in this Manual

Icons in this Manual

About the Symbols

Basic Assumptions

4

Contents

5

6

7

Index to Features

8

9

Safety Warnings

10

11

Handling Precautions

12

13

Quick Start Guide

Insert the battery.

Attach the lens.

Set the lens focus mode switch to <AF>.

Insert a memory card.

Set the power switch to <1>.

14

Set the camera to the default settings.

Focus the subject.

Take the picture.

View the image.

15

Nomenclature

16

17

18

19

20

21

22

23

Attaching the Neck Strap and Hand Strap

24

Getting Started

This chapter explains preliminary steps and basic camera operations.

25

Recharging the Battery

Connect the charger to a power outlet.

Remove the protective covers from the charger and battery.

Recharge the battery.

26

Tips for Using the Battery and Charger

27

28

Installing and Removing the Battery

Installing the Battery

Remove the battery compartment cap.

Insert the battery.

Checking the Battery Level

29

Removing the Battery

Flip out the battery release handle and turn it as shown by the arrow.

Pull out the battery.

30

Using a Household Power Outlet

Connect the DC plug.

Connect the power cord.

Insert the DC Coupler.

31

Installing and Removing the Memory Card

Installing a Card

Open the cover.