Gladwork LM401 Instruction Manual
Add to My manuals2 Pages
Gladwork LM401 is a high-performance laminator with a slim and compact design. It laminates both cold and hot pouches ranging from name card size to letter size. With a ready time of 5-6 minutes, it provides the best lamination for hot pouches up to 3 or 5 mil thickness. For optimal performance, maintain a room temperature of 18°C to 25°C (65°F to 77°F).
advertisement
A4 Laminator
Instruction Manual
PRODUCT DESCRIPTION
LED
Switch Button
Entry
Jam Release Button
Model: LM401
SPECIFICATION
Read this manual carefully before use. Keep it in safe for reference in need.
Thank you for buying this high-performance laminator! This laminator features a slime and compact design. It accepts pouches ranging from cold film to 5 mil thermal laminating pouch,with size from name card to letter size. Now, get familiar with your device now.
Voltage: 100-120V/60Hz
Ready time: 5~6 minutes
Current: 3.2A
Entry width: 9 inches
Thickness: 0.6 mm speed: 250mm/Min
Size:
Pouch:
Rollers:
390 x 145 x 98 mm N.W.:
Cold/ 3mil/5mil
2
1.0 Kg
1
UTILITY
It laminates both cold and hot pouches from name card size to letter size. It provides best lamination for hot pouches up to letter size in 3 mil or 5mil thickness.
To get a better lamination performance, the suitable room temperature is 18 ℃ ~25 ℃ (namely 65 ℉ ~77 ℉ ).
OPERATION
POWER ON and OFF
Connect the plug to mains power, press switch button to turn on the machine.
The Power LED would turn into Red. If you press switch button to "Cold" position, the machine is under cold lamination status. If you press switch to
"Hot" position , the machine is under hot lamination status.
To turn off this laminator, press switch button back to "Off" position, power will be cut off and laminator is shut off.
COLD LAMINATION
Please make sure the machine is cool when you use cold lamination. Do not use cold lamination if you just finish the job of hot lamination. When Ready
LED turns on in green, put the paper into cold pouch, and insert the pouch into laminator through Lamination Entry.
HOT LAMINATION
If you press the switch button to "Hot" position, you would have to wait for about 5~6 minutes until the Green Ready LED turns on , and then put the paper into 3mil or 5mil pouch, and insert the pouch into laminator through laminator’s entry throat.
Note:
1. In order to get better lamination performance, please wait for extra 2 minutes after “Ready LED” lights up.
2. To get a flat lamination performance, we sincerely advise you to use a thickness book to flatten the end edge of the pouch.
3. To get a better performance of laminating 5 mil pouches, please do not laminate more than 10 sheets all at a time. Please wait for extra 2~3 minutes after you laminate 10 sheets of 5mil pouches every time.
CLEAR THE JAMMED POUCH
When a mis-feed or jam occurs, press down "Jam Release " button and pull out the jammed pouch..
MAINTENANCE AND WARNING
1. To clean or move around, make sure that this laminator is turned off.
2. Do not laminate dirty pouches, clean it before lamination.
3. Do not use this laminator in damp conditions.
4. Do not laminate anything that is more than 0.6mm thickness for best seal.
5. Do not laminate heat sensitive paper.
6. This laminator should only use power 100-120V/60Hz and be used indoors only.
7. NEVER OPEN THIS LAMINATOR WHILE IN USE.
WARRANTY
This product comes with one year limited warranty. Please return the laminator with the original package and manual within 14 days if you dislike it.
2
advertisement
Related manuals
advertisement