Hafele 542.90.332 Twister Set Instructions

TWISTER
TWISTER
1.
2.
3. Measure the middle
4. Makr the middle line at the bottom
Page 1
TWISTER
1. Put in drilling template at the bottom
2. Mark the drilling holes
3. Measure the middle at the top
4. Mark the upper middle line
Page 2
TWISTER
1. Put in drilling template at the top
2. Mark the drilling holes
3. Drill at top and bottom (Ø 8 mm)
4. Put in bottom bearing
Page 3
TWISTER
1. Put in upper bearing
2. Put on bottom shelf
3. Put on bottom shelf
4. Fix bottom shelf
Page 4
TWISTER
1. Put on upper shelf
2. Put on upper shelf
3. Put in upper angle
4. Put in upper angle
5.
Page 5
TWISTER
1.
3. Adjust the height of the fitting
2. Measure the cabinte height
4. Adjust the height of the fitting
Page 6
TWISTER
1. Put in the fitting
2. Put in the fitting
!
Turn to 90°!
3. Putt the fitting in bottom bearing
4.
Page 7
TWISTER
1. Put in the upper angle in the bearing
3. tight the upper shelf in the required height
2. Close the bearing
4.
Page 8