General
General Information on TSX ETZ 410 and TSX ETZ 510 Modules
At a Glance
The TSX ETZ 410 and TSX ETZ 510 modules have the following specification:
z
z
z
z
z
z
z
24 volts direct current supply,
10/100 Base-T Ethernet connection,
UNITELWAY slave (2 addresses used),
RS485 serial link for UNITELWAY communication,
RS 232 serial link for communication with an external modem or the
configuration,
3 indicator LEDs,
4 Mb of non-volatile Flash Memory for saving loaded software and the web site.
Note: In operating phase, the RS232 modem and Ethernet interfaces are
exclusive.
The TSX ETZ 410
Module
The following utilities are offered:
z
z
z
z
z
z
z
10/2005
Configuration using web pages, via Ethernet or through RS 232 serial link,
IP configuration of the module in question, either by configuration, or
automatically,
z BOOTP client,
z DHCP client: automatic reconfiguration on replacement of the module (FDR
function).
Default server accessible without configuration with secure access including:
z module configuration pages,
z diagnostic utilities.
Management of the SNMP module V1, MIB-II agent and MIB private Ethernet
Transparent Factory,
Uni-TE/Modbus messaging on TCP/IP with a maximum of 32 simultaneous
connections and Uni-TE/Modbus request limited to 128 bytes,
Diagnostics by LEDs,
Possibility of simultaneously connecting 8 Internet browsers,
17
">
