advertisement
User Guide
Contents
Essentials
Get Familiar with the Home Screen
Screenshots & Screen Recording
Smart Features
Multi-screen Collaboration Between Your Tablet and Phone
Camera and Gallery
Shoot in Portrait, Night, and Wide Aperture Modes
Take Photos with Various Zoom Settings
Apps
Settings
i
Contents
ii
Essentials
Basic Gestures
Basic Gestures and Shortcuts
System Navigation Gestures
Go to Settings > System & updates > System navigation and make sure that Gestures is selected.
Return to the previous screen
Swipe in from the left or right edges to return to the previous screen.
Back to home screen
Swipe up from the bottom to go to the home screen.
Recent tasks
Swipe up from the bottom of the screen and hold to view recent tasks.
Close an app
When viewing recent tasks, swipe up on an app preview to close the app.
1
Essentials
Switch between apps
•
•
Slide across the bottom edge of the screen to switch between apps.
Before using this gesture, touch Settings on the System navigation screen, and ensure that Slide across bottom to switch apps is enabled.
Swipe across the bottom of the screen in an arc to switch between apps.
If your device does not have the Slide across bottom to switch apps switch, it indicates that the corresponding feature is not supported.
Knuckle Gestures
•
•
Before using knuckle gestures, use either of the following methods to make sure that all necessary features are enabled (depending on your device model):
Go to Settings > Accessibility features > Shortcuts & gestures, and enable Take
screenshot and Record screen.
Go to Settings > Accessibility features > Motion control > Take screenshot, and enable
Smart screenshot.
Take a screenshot
Knock twice on the screen with a knuckle to take a screenshot.
Take a scrollshot
Knock on the screen with a knuckle and draw an "S" to take a scrolling screenshot.
Capture part of the screen
Knock and draw an enclosed area with a knuckle to capture part of the screen.
2
Record screen
Knock twice on the screen with two knuckles to start or end a screen recording.
Essentials
More Gestures
Access Home screen editing mode
Pinch two fingers together on the home screen.
Display the shortcut panel on the lock screen
Turn on the screen and swipe up from the bottom of the lock screen.
Display the search bar
Swipe down from the middle of the home screen.
Display the notification panel
Swipe down from the upper left edge of the screen.
Turn on a shortcut switch
Swipe down from the upper right edge of the screen to display Control
Panel and touch to expand the shortcut switches panel (depending on your device model).
3
Essentials
Button Shortcuts
Power off and restart
Press and hold the Power button until your phone displays the Power off and Restart menu.
Turn up volume
Press the Volume up button.
Turn down volume
Press the Volume down button.
Take a screenshot
Press the Volume down and Power buttons simultaneously.
Some products do not have volume buttons.
Lock and Unlock Your Screen
Lock and Unlock Your Screen
Lock Your Screen
Auto-lock:
Your phone will automatically turn off when you haven't used it for a certain period of time.
You can go to Settings > Display & brightness > Sleep, and set the screen timeout duration.
Manually lock the screen:
•
To lock the screen, use either of the following methods:
Press the Power button.
•
On the home screen, pinch two fingers together to enter editing mode. Touch Widgets, and drag the Screen Lock icon to the home screen. Then touch the Screen Lock icon to lock the screen.
4
•
Wake Screen
•
You can turn on the screen in either of the following ways:
Press the Power button.
Go to Settings > Accessibility features > Motion control > Raise and enable Wake
device.
Essentials
Unlock Your Screen
Password unlock: Once the screen is turned on, swipe up from the middle of the screen to display a panel where you can enter your lock screen password.
Face unlock: Once the screen is turned on, bring your face in front of the screen. Your phone will unlock automatically after recognizing your face.
Fingerprint unlock: Touch the fingerprint sensor zone with a finger that you have enrolled.
Be sure to first wake the screen, if your device has an in-screen fingerprint sensor.
Get Familiar with the Home Screen
Create and Use Large Folders
You can group similar apps in a large folder and name the folder for better management.
You can also turn a standard folder into a large one (both the folder and the app icons in it will be enlarged) to access apps more easily.
Create a Large Folder
1 Touch and hold an app icon and drag it over another icon to create a new folder.
2 Touch and hold a folder to switch between display modes. For example, you can touch and hold a new folder and select Enlarge from the displayed menu to create a large folder.
3 You can touch the lower right corner of the large folder to open it and then touch the folder name to rename it.
You can also rename the folder by touching and holding it and selecting Rename.
•
Operations in a Large Folder
•
You can perform the following operations in large folders:
Open apps: In a large folder, touch an icon to access the app directly.
Enter and exit folders: Touch the lower right corner of a large folder to enter it. Touch a blank area in the folder to exit it.
When there are more than nine apps within a large folder, a stacked icon will appear in the lower right corner of the folder. You can touch the stacked icon to view more apps within the folder.
5
Essentials
•
•
Add or remove apps: Open a large folder, touch , and add or remove apps as required.
If you deselect all apps within the folder, the folder will be deleted.
Switch between display modes: Touch and hold a folder to switch between a standard and large display. For example, you can touch and hold a standard folder and select
Enlarge from the displayed menu to create a large folder.
Notification and Status Icons
Notification and Status Icons
Network status icons may vary depending on your region or network service provider.
Supported functions vary depending on the device model. Some of the following icons may not be applicable to your phone.
5G network connected 4G network connected
3G network connected 2G network connected
Full signal strength Roaming
Data saver enabled.
Hotspot enabled
Hotspot disconnected
Wi-Fi connected
Wi-Fi 6 connected
Wi-Fi 6+ connected
Airplane mode is ON
Battery empty
Charging
Super charging
No SIM card inserted
Hotspot connected
Switching network via Wi-Fi+
Wi-Fi network is faulty, unable to connect to the Internet
Wi-Fi 6 network is faulty, unable to connect to the Internet
Wi-Fi 6+ network is faulty, unable to connect to the Internet
Alarm set
Low battery power
Quick charging
Wireless super charging
Wireless fast charging Regular wireless charging
6
Power Saving mode on
Bluetooth enabled
Bluetooth device connected
Driving mode
Location service enabled
Headset connected
In call
Missed call
Silent mode
NFC enabled
Syncing…
Performance mode enabled
Event reminder
Digital Balance enabled
Bluetooth device battery
VPN connected
Projection device connected
Essentials
Eye Comfort enabled
Headset with a microphone connected
VoLTE enabled
There are unread messages.
Vibration
Do Not Disturb mode enabled
Syncing failed
New email
More notifications
Control Panel
Introduction to Control Panel
You can easily manage and control media playback, shortcuts, and Device+ in the Control
Panel.
Swipe down from the upper right edge of the screen to display Control Panel where you can access the following features with ease:
7
Essentials
The figures are for reference only.
•
•
Media controls: To control media playback and switch between recently used media apps and media devices (such as Visions and Bluetooth headsets).
Shortcut controls: To enable, disable, or set frequently used features.
•
•
Device+: Automatically discovers nearby devices logged in to the same HUAWEI ID and allows you to link them so they work together as one.
Device controls: To manage and control devices and scenes that have been added in AI
Life.This feature is only available in some countries and regions.
Use Shortcut Switches
8
Essentials
Turn on a Shortcut Switch
Swipe down from the upper right edge of the screen to display Control Panel and touch to expand the shortcut switches panel (depending on your device model).
The figures are for reference only.
•
•
Touch a shortcut switch to enable or disable the corresponding feature.
Touch and hold a shortcut switch to access the settings screen of the corresponding feature
(supported by some features).
•
Touch to access the system settings screen.
9
Essentials
Customize Shortcuts
Swipe down from the upper right edge of the screen to display Control Panel, go to >
Edit switches, then touch and hold a shortcut switch to drag it to your preferred position, and touch Done.
Audio Control Panel
Manage Audio Playback in Audio Control Panel
When multiple audio apps (such as Music) are opened, you can manage music playback and switch between these apps in Audio Control Panel with ease.
1 After opening multiple audio apps, swipe down from the upper right edge of the phone to display Control Panel, then touch the audio playback card at the top of Control Panel.
2 The currently and recently used audio apps will be displayed in Audio Control Panel where you can manage playback (such as playing, pausing, and switching to the previous or next song) in the app in use, or touch another audio app to quickly switch playback.
•
•
Some apps need to be updated to the latest version before using this feature.
Not all apps support Audio Control Panel.
Quickly Switch Audio Playback Device
When your phone is connected to an audio device (such as a headset, Bluetooth speaker, or
Vision product), you can quickly switch the playback device in the audio control section in
Control Panel (such as for transferring the current music playback from your phone to a
Bluetooth speaker).
1 Connect your phone to an audio device via Bluetooth or other methods.
After a Vision product is connected to your phone via Bluetooth, you can also connect it to the same Wi-Fi network and log in to the same HUAWEI ID as your phone to perform more operations.
2 Swipe down from the upper right edge of your phone to display Control Panel, touch or the device icon (such as ) in the top right corner of the audio control section at the top, then select the audio device from the connected device list to transfer the current audio playback on your phone to the device.
Work Seamlessly Across Devices, with Device+
Device+ facilitates seamless collaboration between your devices, including tablets, laptops, and Visions, making your phone a virtual hub with effortless controls. Seamlessly transfer ongoing tasks from your phone to the boundless Vision display, with just a tap, including streaming audio and video content, or even view and edit phone files from the convenience of your laptop.
Please make sure your device has been updated to the latest system version.
10
Essentials
Set Device+
•
•
•
•
Currently, Device+ supports linking phones with the following types of devices. To use this feature, make sure that devices to be connected support Device+. Before you get started, enable Bluetooth and Wi-Fi and log in to your HUAWEI ID on your phone. For other devices, perform the following settings:
Tablet: Enable Bluetooth and Wi-Fi, and ensure that it is logged in to the same HUAWEI ID as your phone.
Computer: Enable Bluetooth and Wi-Fi, and ensure that it is logged in to the same
HUAWEI ID as your phone.
Vision: Enable Bluetooth and Wi-Fi, and ensure that it is logged in to the same HUAWEI ID as your phone.
Bluetooth device: Some Bluetooth devices (such as Bluetooth headsets) can be linked with your phone via Device+ after establishing a Bluetooth connection.
Show Device+: If Device+ is hidden or cannot be found, go to Control Panel and then to
> Show Device+.
Transfer MeeTime Calls and Audio or Video Being Streamed to Other Devices
When you are making MeeTime calls on your phone, watching videos (such as in HUAWEI
Video, Youku, or other video streaming apps), or listening to music, you can transfer any of these ongoing tasks to another device via Device+ and pick up from where you left off on the new device. For instance, you can transfer a MeeTime call to your Vision and a video being streamed to your tablet.
MeeTime: This feature is only available in some countries and regions.
•
You can select different devices to transfer the following tasks:
Videos: Can be transferred to tablets and Visions.
•
•
MeeTime calls: Can be transferred to Visions.
Music: Can be transferred to Bluetooth earphones and Visions (either when the screen is on or off).
1 Swipe down from the upper right edge of your phone to display Control Panel. Available devices will be displayed in the Device+ section. You can also touch to search for nearby devices manually.
2 Touch a device that you want to transfer the ongoing tasks to.
11
Essentials
The figures are for reference only.
Use Multi-Screen Collaboration on a Computer or Tablet
You can view or edit files on your phone using your computer or tablet, drag files across devices, and even use phone apps on your computer or tablet.
1 Swipe down from the upper right edge of your phone to display Control Panel. Available devices will be displayed in the Device+ section. You can also touch to search for nearby devices manually.
2 Select a device that you want to connect to, and your phone screen will then be displayed on that device.
To stop Multi-Screen Collaboration, touch the corresponding device again in the Device+ section.
Screenshots & Screen Recording
Take a Screenshot
12
Essentials
Use Your Knuckle to Take a Screenshot
1 Before using knuckle gestures, use either of the following methods to make sure that all necessary features are enabled (depending on your device model):
•
•
Go to Settings > Accessibility features > Shortcuts & gestures > Take screenshot and enable Knuckle screenshots.
Go to Settings > Accessibility features > Motion control > Take screenshot and enable Smart screenshot.
2 Knock twice in quick succession with one knuckle to take a screenshot.
Take a Screenshot with a Key Shortcut
Press and hold down on the Power and Volume down buttons at the same time to take a screenshot.
Take a Screenshot with a Shortcut Switch
Swipe down from the upper right edge of the screen to display Control Panel, touch to expand the shortcut switches panel (depending on your device model), and touch
Screenshot to take a screenshot.
Share or Edit a Screenshot
•
After you take a screenshot, a thumbnail will appear in the lower left corner of the screen.
Feel free to:
Swipe up on the thumbnail to select a method for sharing the screenshot with others.
•
•
Swipe down on the thumbnail to take a scrolling screenshot.
Tap on the thumbnail to edit, delete, or do more with the screenshot.
Screenshots are saved to Gallery by default.
Swipe Down with Three Fingers to Take a Screenshot
1 Go to Settings > Accessibility features > Shortcuts & gestures > Take screenshot or
Settings > Accessibility features > Motion control > Three-finger screenshot
(depending on your device model) and make sure that Three-finger screenshot is enabled.
2 Swipe down from the middle of the screen with three fingers to take the screenshot.
Take a Partial Screenshot
Use Partial screenshot to take a screenshot of a part of the screen. You can choose your preferred screenshot shape (such as a rectangle, oval, or heart).
Take Partial Screenshots with Knuckle Gestures
13
Essentials
The figures are for reference only.
1 Knock on the screen with a single knuckle and hold to draw an outline around the part of the screen that you wish to capture. Make sure that your knuckle does not leave the screen.
2 The screen will display your knuckle movements. You can then:
•
Drag the frame to the desired position or resize it.
•
Touch any of the shape options at the bottom of the screen to change the shape of the captured area. You can also keep the original shape that you drew.
3 Touch to save the screenshot.
Use a Shortcut to Take a Partial Screenshot
1 Swipe down from the upper right edge of the screen to display Control Panel, touch to expand the shortcut switches panel (depending on your device model), touch next to Screenshot, and touch Partial screenshot in the displayed dialog box.
2 Follow the onscreen instructions to draw an outline with your finger around the part of the screen that you want to capture.
3 The screen will display the movement trajectory of your finger and take a screenshot of the selected area. You can then:
•
Drag the frame to the desired position or resize it.
•
Touch any of the shape options at the bottom of the screen to change the shape of the captured area. You can also keep the shape that you drew.
4 Touch to save the screenshot.
14
Essentials
Take a Scrolling Screenshot
Use Scrollshot to capture a memorable chat, article, or essential work document that can't display in full on the screen, and share with others.
Use a Knuckle to Take a Scrolling Screenshot
The figures are for reference only.
1 Tap a single knuckle against the screen and hold to draw an "S". Your device will automatically scroll to the bottom of the page to capture all of the content in a single screenshot.
2 You can touch the screen at any time to stop the scrolling.
Use a Shortcut to Take a Scrolling Screenshot
1 Swipe down from the upper right edge of the screen to display Control Panel, touch to expand the shortcut switches panel(depending on your device model), touch next to Screenshot, and touch Scrollshot in the displayed dialog box.
2 You can touch the screen at any time to stop the scrolling.
Enter Text
15
Essentials
Use Celia Keyboard
Celia Keyboard is a secure and intuitive keyboard developed by Huawei. It supports efficient voice inputs, smooth handwriting, an emulated mechanical keyboard, as well as 170+ input languages.
If Celia Keyboard is not yet installed on your device, search for and install it in AppGallery.
Go to Settings > System & updates > Language & input and set Celia Keyboard as the default keyboard.
Text Input
Keyboard input
Celia Keyboard comes with a 26-key layout by default. As you type on the keyboard, a box will be displayed for you to select predicted words.
Press and hold a letter key and then swipe up to enter a number, or swipe left or right to enter the letter.
Voice input
You can have your speech converted into text to improve your input efficiency.
•
Touch and hold to go to the voice input screen.
•
On the voice input screen, touch to select your preferred language.
This feature is only available in some countries and regions.
Rich Media Input
•
On the keyboard, touch and hold , then touch and select different emojis.
•
On the keyboard, touch and hold , then touch and select different emoticons.
Switch to Another Input Language
Touch and hold in the lower left corner and select English(United States) or More
languages… in the pop-up menu. Alternatively, touch to quickly switch input language.
Celia Keyboard Settings
Set the skin
On the input keyboard, go to > Theme and select a skin.
Set the font
On the input keyboard, go to > Settings > Font and select a font.
Set the keyboard sound and vibration effects
16
Essentials
On the input keyboard, go to > Sound & vibration and adjust the Keypress volume and
Vibration intensity. You can also touch Sound on keypress and select your desired audio effects.
Set the mechanical keyboard
On the input keyboard, go to > Mechanical keyboard and toggle on the Mechanical
keyboard switch.
To switch back to the normal keyboard, toggle off the Mechanical keyboard switch.
Some devices do not support the mechanical keyboard.
multi-window
Edit the Multi-Window Dock
Swipe inward from the left or right edge of your phone and hold, to bring up the Multi-
Window dock.
•
Add apps: Go to > on the Multi-Window dock, select your desired apps from the
More apps section, and touch .
•
Move apps: Go to > , touch and hold an app icon on the Multi-Window dock, drag it up or down to your desired position on the dock, and touch .
•
Remove apps: Go to > , touch in the top right corner of an app icon on the
Multi-Window dock, and touch .
The suggested apps shown on the Multi-Window dock cannot be moved around or deleted.
The Multi-Window dock is enabled by default. To disable it, go to Settings > Accessibility
features > Multi-Window, and turn off the Multi-Window dock switch.
Split the Screen, to Multi-Task Away
Multi-Window allows you to open apps in split screen mode, for seamless multi-tasking at all times.
Split-screen mode is only supported in certain apps.
To check whether an app supports Multi-Window:
1 Swipe inward from the left or right edge of your phone screen and hold, to bring up the
Multi-Window dock.
2 Touch to find the list of apps that support Multi-Window in the More apps section.
17
Essentials
Splitting the screen:
1 After opening an app, swipe inward from the left or right edge of your phone screen and hold, to bring up the Multi-Window dock.
2 Hold down on an app in the dock, drag it to the screen, and then release.
If an app does not support Multi-Window, a prompt will appear onscreen.
Switching split-screen panes:
Touch and hold down on at the top of a split-screen pane until you see the pane shrink, then drag it to the other side of the screen to switch panes.
Exiting split-screen mode:
Touch and hold down on or in the middle of the split screen line, and drag it until you see either pane disappear.
Drag and Drop Between Apps with Multi-Window
•
•
•
Use the Multi-Window feature to easily drag and drop images, text, and documents between apps.
Drag and drop an image: When taking notes with Notepad, open Files, select the photo you want to add, and drag it into the Notepad editor.
Drag and drop text: When sending an SMS message, open Notepad, touch and hold the text you want to send, and drag it into the message text input box.
Drag and drop a document: When writing an email, open Files, select the document you want to attach, and drag it into the email editor.
Not all apps fully support drag-and-drop with Multi-Window.
Multi-Window View for a Single App
You can create two task windows for the same app (such as Email and Notepad), and drag images, text, or documents between them.
This feature is unavailable in some apps.
Enter the split-screen view within an app.
1 Open the Email app.
2 Swipe inward from the left or right edge of your phone and hold to bring up the Multi-
Window dock.
3 Touch and hold the Email icon, and drag it to the screen to enter split-screen view.
•
•
Drag images, text, or documents between the split-screen windows.
Drag an image: Select an image from one split-screen window and drag it to the other window.
Drag text: Touch and hold the text and select the desired part from one split-screen window, then touch and hold the text again and drag it to the other window.
18
•
Essentials
Drag a document: Select a document from one split-screen window and drag it to the other window.
Use the Floating Window
Open a floating window while gaming, and you can chat with a friend without missing a second of the action.
Display the floating window:
1 Swipe inward from the left or right edge and hold to bring up the Multi-Window dock.
2 Touch an app icon in the Multi-Window dock to open the app in a floating window.
Relocate the floating window:
Drag the bar at the top of the floating window to move the window to the desired position.
Resize the floating window:
Drag the bottom edge, two sides, or bottom corners of the floating window to resize it.
Display in full screen:
Touch at the top of the floating window to display it in full screen.
Minimize the floating window:
Touch at the top of the floating window to minimize and shrink it into a floating bubble.
Close the floating window:
Touch at the top of the floating window to close it.
Find and Switch Between Floating Windows for Apps
You can quickly find and switch between floating windows for apps using the floating window management function.
1 Make sure that you have opened floating windows for multiple apps and minimized them into the floating ball.
2 Touch the floating ball to display all floating window previews:
•
•
Browse through the floating window previews: Swipe up or down to find the floating window preview of the app you are looking for.
Display the floating window for an app: Touch the floating window preview of the app to display it in a floating window.
•
Close the floating window for an app: Touch on the floating window preview to close it.
Open an Attachment in a Floating Window
You can open a link or attachment within specific apps (such as Email and Notepad) in a floating window.
19
Essentials
This feature is unavailable in some apps.
1 Open the Email app.
2 Touch a link or attachment in the Email app to open it in the floating window.
•
Open a link: Touch a link in the Email app to display it in a floating window.
•
Open an attachment: Touch an attachment (such as a document, image, or video) in the Email app to display it in a floating window.
20
Smart Features
AI Lens
Scan to Translate
AI Lens allows you to scan and translate text in a foreign language, so you can easily read road signs, menus, or descriptions on cosmetics bottles when you are traveling or shopping abroad.
Scan to Translate Using Camera
1 Go to Camera > Photo, touch , and then touch or (depending on your device model).
2 Select the source and target languages from the language list.
3 Position the text you want to translate within the viewfinder, and wait for it to be translated.
AI Touch
Enable AI Touch
When you see any content that you are interested in on your phone, touch and hold the screen with two fingers to bring up AI Touch to learn more.
Go to Settings > Accessibility features > AI Touch and enable AI Touch.
Shop with AI Touch
When you see an item you wish to buy on your phone, you can use AI Touch to quickly search for the item and compare prices across multiple shopping platforms before making the purchase.
Touch and Hold the Screen with Two Fingers for Visual Shopping
1 Go to Settings > Accessibility features > AI Touch and enable AI Touch.
2 When you see an item you wish to buy on your device, touch and hold the screen with two fingers.
3 When several items are displayed on the screen, adjust the size and position of the identification box to fit around the item you wish to identify.
4 After the item has been identified, links to purchase it on different shopping platforms will be displayed.
Easy Projection
21
Smart Features
Use Desktop Mode
After your phone screen is projected, go to > Desktop.
In Desktop, your phone and the large display work independently and can show different content. The content projected on the large display is in a layout similar to that on a computer desktop.
Therefore, you can edit a document on the large display while chatting on your phone. You don't need to worry about missing out on notifications, calls, or messages, as a red dot will appear on the notification panel on the external display to let you know.
Use Your Phone as a Touchpad
After projecting your phone on the large display in Desktop, if no keyboard is available, your phone can work as a touchpad to complete input operations of a mouse and keyboard.
•
Go to > Touchpad. You can:
Use gestures as instructed to simulate mouse commands.
The figures are for reference only.
•
When no external keyboard is connected, touch the text input box on the external display to display the onscreen keyboard to input text.
If an external keyboard is connected, the onscreen keyboard will not be available. In this case, you need to use the external keyboard to input text.
Use Screen Projection to Make Work Easier
In Desktop, you can use the following features:
22
•
•
•
•
Smart Features
Multi-window display: Open multiple windows at a time to multitask.
File management: Save files to the desktop, create files or folders, and rename or delete files.
Quick search: Search for documents, multimedia files, and apps using the start menu search box.
Quick app projection: Touch and hold an app icon on your phone to view the projection options. You can then project and open the app on the large display.
Exit Desktop Mode
To exit Desktop mode, go to > Mirror screen.
Multi-screen Collaboration
Drag to Transfer Files Between Your Phone and Laptop
After connecting your phone to a laptop, you can transfer files between them to make work easier.
Drag and Drop Files
After Multi-Screen Collaboration is established between your device and PC, you can drag and drop files such as pictures and videos between them to make your work easier.
•
•
Transfer files from your device to the PC.
In the device window on the PC, open Gallery or Files, click and hold a picture or video, click and hold any of the selected files until a dragging icon is displayed, then drag the files to a folder on your PC.
In the device window on the PC, drag the selected pictures or text and drop them in an opened document on your PC.
For example, drag a photo or text from Notepad in the device window and drop it to an
Office document opened on your PC, then continue editing on your PC.
•
•
•
Transfer files from your PC to your device:
Go to Gallery > Albums in the device window, and drag a picture or video from your PC to the device window.
Open Files in the device window, and drag a document from your PC to the device window.
The file will be saved in the folder that is open in Files, or in the Huawei Share folder by default.
Open a file in the device window on the PC, then drag a picture or text from Notepad to the device window.
For example, drag a picture on your PC to a Notepad item opened in the device window, then continue editing on your device.
23
Smart Features
Access Phone Apps and Files on Your Computer
After Multi-screen Collaboration is enabled between your phone and Huawei or Honor laptops, you can use a mouse and keyboard on your laptop to access your phone apps and files.
Operate Phone Apps on Your PC
•
Use a mouse to perform operations quickly
Open an app: Click an app in the phone window on your PC to open it.
•
Browse a page: Use the mouse scroll wheel to browse web pages in the phone window or scroll between desktop tabs.
•
Use a keyboard to perform operations quickly
Input text: Use the input method on your PC to enter text in the phone window.
•
•
•
Copy and paste text: Press Ctrl+C on the PC keyboard to copy text and press Ctrl+V to paste it in the phone window.
To view information about the text you have copied recently, click the Notification
Center icon on the PC, then select the Clipboard tab.
Send messages quickly: Press Ctrl+Enter on the keyboard to send a message in the phone window.
Exit an app: Press the ESC key on the keyboard to exit an app in the phone window.
Always display the phone window on the top
In the phone window on your PC, click > to pin the phone window so that it will be always displayed on the top, and click this icon again to unpin the phone window.
Answer a Voice or Video Call on Your Laptop
After Multi-Screen Collaboration is enabled between your phone and laptop, you can use the laptop to answer voice and video calls (such as those in WeChat, QQ, and MeeTime) from your phone. During a call, the audio and video can be played through your laptop and its accessories such as the speaker and camera.
Swipe down from upper left edge of your phone to display the notification panel, and touch
Play audio/video on phone or Play audio/video on PC to switch the audio output device.
Please ensure that your laptop is running PC Manager 10.1 or a later version.
•
Open and Edit Files on Your Phone Using Apps on the PC
After connecting your phone to your laptop, you can open and edit various files on your phone from your laptop.
Documents: Use Microsoft Office on your laptop to open a document.
•
•
Pictures: Use Photoshop on your laptop to open or edit a picture.
Audio and video files: Use Windows Media Player to open an audio or video file.
24
•
•
Smart Features
Web pages: Use IE browser on your laptop to open a web page.
Compressed files: Use WinRAR on your laptop to extract and open compressed files.
Please ensure that your laptop is running PC Manager 10.1 or a later version.
Multi-screen Collaboration Between Your Tablet and
Phone
Multi-screen Collaboration Between Your Phone and Tablet
Connect your phone and tablet to use Multi-screen Collaboration for cross-device operations, such as to display your phone screen on the tablet, use your phone apps on the tablet, drag files across the two devices, and edit a file from your phone on the tablet.
Connect Your Phone and Tablet
Only certain Huawei and Honor tablets support this feature.
Connect your phone and tablet and enable Multi-Screen Collaboration using one of the following methods (depending on your device model):
Connect over Bluetooth:
1 Swipe down from the upper right edge of the tablet screen to display Control Panel, touch to expand the shortcut switches panel (depending on your device model), and enable Multi-Screen Collaboration.
2 Swipe down from the upper right edge of the phone screen to display Control Panel and enable Bluetooth.
3 Hold your phone close to your tablet and follow the onscreen instructions to establish a connection.
Scan a QR code to connect:
1 Open Multi-Screen Collaboration on your tablet and touch Scan to connect on the
Multi-Screen Collaboration screen.
2 Ensure that your phone is connected to the Internet and connect your phone and tablet as prompted.
Connect by tapping against an NFC-capable keyboard:
You can place your phone against the standard NFC-capable keyboard that comes with your tablet to enable Multi-screen Collaboration.
1 Make sure that your tablet has been paired with the keyboard.
2 Swipe down from the upper right edge of the phone screen to display Control Panel, touch to expand the shortcut switches panel (depending on your device model), and enable NFC.
25
Smart Features
3 Tap the NFC area at the back of your phone (near the rear cameras) against the NFC area of the keyboard until your phone vibrates or plays a tone.
4 Connect your phone and tablet as prompted.
•
Drag to Transfer Files Between Your Phone and Tablet
1 Open Gallery or Files, and touch and hold a picture, video, or document.
2 Select more files if needed, touch and hold any of the selected files, then drag them when an icon for dragging files appears.
•
For example, you can:
Drag to transfer files in Gallery or Files between your phone and tablet.
Drag to transfer files in Files between your phone and tablet.
•
Drag a picture, text, or file from your phone to an open document on your tablet, such as a
Microsoft Office document, memo, or email.
Disconnect Your Phone from Your Tablet
After you have finished using your phone and tablet, you can disconnect them using the following methods:
•
On the phone window displayed on the tablet, touch to disconnect.
•
Swipe down from the upper left edge of your phone or tablet screen to display the notification panel and touch DISCONNECT.
Huawei Print
Print Files, with Huawei Print
Your phone makes it easy to print images and documents on it, by detecting nearby printers that support Huawei Print. Then just touch to print!
1 Power on the target printer and make sure that it is connected to the same Wi-Fi network as your phone, or that Wi-Fi Direct is enabled.
2 To print files stored in different locations on your phone:
•
•
•
Gallery: Open an image or select multiple images in Gallery, and go to Share > .
Notepad: Open a note in Notepad, and go to More > Print.
Files: Select one or more files in Files, and go to Share > Print.
3 After granting the necessary permissions, touch Select to detect nearby printers and select the desired printer. You can then set the number of copies, color, paper size, and other options on the preview screen, and touch PRINT.
If no printer is detected, download and install the required printer plug-in as prompted on the Select printer screen.
26
Smart Features
Multi-Device Collaboration
Work Seamlessly Across Devices, with Device+
Device+ facilitates seamless collaboration between your devices, including tablets, laptops, and Visions, making your phone a virtual hub with effortless controls. Seamlessly transfer ongoing tasks from your phone to the boundless Vision display, with just a tap, including streaming audio and video content, or even view and edit phone files from the convenience of your laptop.
Please make sure your device has been updated to the latest system version.
Set Device+
•
•
•
•
Currently, Device+ supports linking phones with the following types of devices. To use this feature, make sure that devices to be connected support Device+. Before you get started, enable Bluetooth and Wi-Fi and log in to your HUAWEI ID on your phone. For other devices, perform the following settings:
Tablet: Enable Bluetooth and Wi-Fi, and ensure that it is logged in to the same HUAWEI ID as your phone.
Computer: Enable Bluetooth and Wi-Fi, and ensure that it is logged in to the same
HUAWEI ID as your phone.
Vision: Enable Bluetooth and Wi-Fi, and ensure that it is logged in to the same HUAWEI ID as your phone.
Bluetooth device: Some Bluetooth devices (such as Bluetooth headsets) can be linked with your phone via Device+ after establishing a Bluetooth connection.
Show Device+: If Device+ is hidden or cannot be found, go to Control Panel and then to
> Show Device+.
Transfer MeeTime Calls and Audio or Video Being Streamed to Other Devices
When you are making MeeTime calls on your phone, watching videos (such as in HUAWEI
Video, Youku, or other video streaming apps), or listening to music, you can transfer any of these ongoing tasks to another device via Device+ and pick up from where you left off on the new device. For instance, you can transfer a MeeTime call to your Vision and a video being streamed to your tablet.
MeeTime: This feature is only available in some countries and regions.
•
•
You can select different devices to transfer the following tasks:
Videos: Can be transferred to tablets and Visions.
MeeTime calls: Can be transferred to Visions.
•
Music: Can be transferred to Bluetooth earphones and Visions (either when the screen is on or off).
27
Smart Features
1 Swipe down from the upper right edge of your phone to display Control Panel. Available devices will be displayed in the Device+ section. You can also touch to search for nearby devices manually.
2 Touch a device that you want to transfer the ongoing tasks to.
The figures are for reference only.
Use Multi-Screen Collaboration on a Computer or Tablet
You can view or edit files on your phone using your computer or tablet, drag files across devices, and even use phone apps on your computer or tablet.
1 Swipe down from the upper right edge of your phone to display Control Panel. Available devices will be displayed in the Device+ section. You can also touch to search for nearby devices manually.
2 Select a device that you want to connect to, and your phone screen will then be displayed on that device.
To stop Multi-Screen Collaboration, touch the corresponding device again in the Device+ section.
28
Smart Features
Audio Control Panel
Audio Control Panel
Manage Audio Playback in Audio Control Panel
When multiple audio apps (such as Music) are opened, you can manage music playback and switch between these apps in Audio Control Panel with ease.
1 After opening multiple audio apps, swipe down from the upper right edge of the phone to display Control Panel, then touch the audio playback card at the top of Control Panel.
2 The currently and recently used audio apps will be displayed in Audio Control Panel where you can manage playback (such as playing, pausing, and switching to the previous or next song) in the app in use, or touch another audio app to quickly switch playback.
•
Some apps need to be updated to the latest version before using this feature.
•
Not all apps support Audio Control Panel.
Quickly Switch Audio Playback Device
When your phone is connected to an audio device (such as a headset, Bluetooth speaker, or
Vision product), you can quickly switch the playback device in the audio control section in
Control Panel (such as for transferring the current music playback from your phone to a
Bluetooth speaker).
1 Connect your phone to an audio device via Bluetooth or other methods.
After a Vision product is connected to your phone via Bluetooth, you can also connect it to the same Wi-Fi network and log in to the same HUAWEI ID as your phone to perform more operations.
2 Swipe down from the upper right edge of your phone to display Control Panel, touch or the device icon (such as ) in the top right corner of the audio control section at the top, then select the audio device from the connected device list to transfer the current audio playback on your phone to the device.
29
Camera and Gallery
Take Photos
Take Photos
1 Open Camera.
2 You can then:
•
Focus: Touch the location you want to focus on.
To adjust focus and metering separately, touch and hold the viewfinder and drag the respective frame or ring to the desired location.
•
•
•
Adjust brightness: Touch the viewfinder. When the symbol appears next to the focus frame, drag it up or down.
Zoom in or out: On the viewfinder, pinch in or out, or drag the zoom slider.
Select a camera mode: Swipe up, down, left, or right across the camera mode options.
•
Turn the flash on or off: Touch and select (Auto), (On), (Off), or
(Always on).
If you select (Auto) and the camera detects that you are in a dimly lit environment, a flash icon will appear in the viewfinder and the flash will be automatically turned on when you take a photo.
These features may not be available in some camera modes.
3 Touch the shutter button to take a photo.
Use Gestures to Take Photos
1 Open Camera and touch to switch to the front camera.
2 Touch and enable Gesture control.
3 Return to the viewfinder and hold your palm about 20 cm (8 in.) in front of the screen.
4 When the front camera detects your palm, your phone will take a photo after a brief countdown.
Use the Floating Shutter to Take Photos
You can enable the floating shutter to display it in the camera viewfinder, and drag it anywhere you like to take photos quickly.
1 Go to Camera > and enable Floating shutter.
30
Camera and Gallery
2 The floating shutter will then be displayed in the viewfinder. You can drag it anywhere you like.
3 Touch the floating shutter to take a photo.
Take Timed Photos
The camera timer allows you to set a countdown so you can get into position after you have touched the shutter button.
1 Go to Camera > > Timer and select a countdown.
2 Return to the viewfinder and touch the shutter button. Your phone will take a photo when the countdown ends.
Use Audio Control to Take Photos
You can use your voice to take photos without having to touch the shutter button.
1 Go to Camera > > Audio control, and select an option.
2 Go back to the viewfinder, then say your command to take a photo.
Shoot in Portrait, Night, and Wide Aperture Modes
Shoot Dazzling Portraits
Portrait mode comes with custom beauty and lighting effects to choose from, so that a touch of the shutter brings out your subject at their best.
1 Open Camera and select Portrait mode.
2 Frame your subject within the viewfinder.
To take a selfie, touch .
3 From there, feel free to:
•
Enable beauty effects: Touch to adjust the beauty effects.
To disable the beauty effects, drag the setting to its lowest value, or touch .
•
•
Set lighting effects: Touch , and select your desired effect.
Light compensation: When you switch to the front camera in dim lighting conditions, you can touch the flash icon to enable light compensation.
Touch the flash icon and select (auto) or (steady on).
Not all devices support all of these features.
4 Touch the shutter button to take a photo.
31
Camera and Gallery
Take Night Shots
Night mode gives your photos sharper details and brighter colors even when shooting in low light or at night.
1 Open Camera or go to Camera > More (depending on your device model), and select
Night mode.
2 When shooting with the rear camera, some phones allow you to adjust the ISO sensitivity and shutter speed by touching or in the viewfinder.
3 Steady your phone and touch the shutter button.
4 Your phone will adjust the exposure time based on the ambient brightness. Keep your phone steady until the countdown finishes.
You can also touch the shutter button to take a photo before the countdown finishes.
Some phones do not support ending a countdown before it is due to finish.
Take Photos, with Aperture Mode
Take Wide Aperture Photos
Wide aperture mode allows you to shoot photos and videos with a blurred background while your subject remains in sharp focus.
1 Open Camera or go to Camera > More(depending on your device model) and select
Aperture mode.
2 Touch where you want to focus. For best results, your phone needs to be within 2 m
(about 7 ft.) of your subject.
3 Touch in the viewfinder and drag the slider to adjust aperture settings. A smaller aperture value will create a more blurred background.
4 Touch the shutter button to shoot a photo.
Edit Background Blur in Wide Aperture Photos
You can adjust the focus and background blur after you've taken a wide aperture photo.
1 Go to Gallery > Albums > Camera.
2 Touch a photo tagged with , then touch at the top of the photo.
3 Touch the photo to adjust the focus. Drag the slider at the bottom to adjust the aperture.
4 Touch to save the settings.
AI Camera
32
Camera and Gallery
Take Professional-Looking Photos
Master AI is a pre-installed camera feature that helps you take better photos by intelligently identifying objects and scenes (such as food, beaches, blue skies, and greenery, as well as text) and optimizing the color and brightness settings accordingly.
Master AI is displayed as AI photography or AI camera on some devices.
1 Open Camera and select Photo mode.
2 Touch to turn on .
3 Frame the subject within the viewfinder. Once the camera identifies what you are shooting, it will automatically recommend a mode (such as portrait, greenery, or text).
4 To disable the recommended mode, touch next to the mode text or turn off .
Take Photos with Various Zoom Settings
Take Wide-Angle or Long-Focus Photos
The zoom capabilities of your device's camera allow you to capture more of a scene, or distant vistas.
Take Wide-Angle Photos
1 Open Camera and select Photo mode.
2 Point the camera at the subject and zoom in or out using the side bar, or by pinching or spreading two fingers on the screen. The smaller the value, the wider the angle of view.
You can also use Super wide angle mode (only available on certain models).
On the Photo screen, make sure that is enabled. Then point the camera at the desired subject. If your phone detects a high-rise or other buildings, it will automatically recommend Super wide angle mode to you. Touch Wide to get a wider field of view.
3 Touch to take a photo.
Take Photos from Far Away
1 Open Camera and select Photo mode.
2 Point the camera at a distant subject and zoom in or out using the side bar or by pinching or spreading two fingers on the screen.
If your phone supports zooming in more than 15X, a picture-in-picture preview frame will be displayed in the viewfinder to help you focus on your subject when you zoom in more than 15X.
Some products do not support the picture-in-picture preview frame.
3 In the viewfinder, touch where you want to focus, and touch to shoot when the subject is in focus.
33
Camera and Gallery
Moving Pictures
Take Moving Pictures to Bring Photos to Life
Can't quite capture that perfect moment? Moving picture shoots a short period of movement and sound before and after you touch the shutter button, to bring that elusive snapshot you just missed… into full view!
Take Moving Pictures
1 Go to Camera > Photo and touch to enable Moving picture, or go to Camera > More and select Moving picture (depending on your device model).
2 Touch the shutter button to shoot.
Play Moving Pictures
Moving pictures are saved in JPG format in Gallery.
Go to Gallery > Albums > Camera, touch a moving picture, then touch at the top of the picture to view it.
The moving picture will automatically stop after a complete playback. You can also touch the screen to stop the playback.
Save a Moving Picture as a GIF File or Video
To save a moving picture as a GIF file or video, touch the moving picture in the album, touch
, then select Save as video or Save as GIF.
Share Moving Pictures
You can share moving pictures with Huawei or Honor devices using various methods, such as
Wi-Fi Direct, Bluetooth, or Huawei Share.
Go to Gallery > Albums > Camera, touch and hold to select the moving pictures you want to share, then touch to share them.
If you share moving pictures to third-party apps or incompatible devices, moving pictures will be displayed as static images.
Pro Mode
Use Pro Mode to Shoot Like a Pro
Pro mode lets you fine-tune photos and videos and gives you full control over ISO sensitivity, focus mode, and more when taking photos or recording videos.
34
Shoot to Stun, with Pro Mode
Camera and Gallery
The figures are for reference only.
1 Open Camera or go to Camera > More (depending on your device model), and select Pro mode.
2 From there, you can:
•
Adjust the metering mode: Touch M and select a metering mode.
Metering mode
Overview
Matrix
Measures light across the entire frame; ideal for shooting natural landscapes.
35
•
•
•
•
•
Camera and Gallery
Metering mode
Overview
Center
Focuses on light near the center of the screen; ideal for shooting portraits.
Focuses on light from a specific region, such as a subject's eyes.
Spot
Adjust the ISO sensitivity: Touch ISO and drag the slider.
In low-light settings, you'll generally want to increase the ISO sensitivity. In well-lit settings, you'll want to reduce it to avoid image noise.
Adjust the shutter speed: Touch S and drag the slider.
The shutter speed determines the amount of light that is able to enter the camera lens. When shooting stationary scenes or portraits, it's recommended that you use a slower shutter speed. Likewise, when shooting fast-moving scenes or objects, you'll want to increase the shutter speed.
Adjust EV exposure compensation: Touch EV· and drag the slider.
It's recommended that you increase the EV value in low-light environments, and decrease it in well-lit environments.
Adjust the focus: Touch AF· and select a focus mode.
Focus Mode Usage scenarios
AF-S (single) Stationary subjects
AF-C
(continuous)
Moving subjects
MF (manual) Touch the subject of interest to focus in on them, such as the subject's face.
Adjust the color cast: Touch WB· and select a mode.
When shooting in bright daylight, select . When shooting in overcast conditions or low-light environments, select .
•
Touch to adjust the color temperature.
Select the storage format: Pro mode allows you to save the photo in different formats.
Touch in the viewfinder to select your preferred format.
3 Touch the shutter button to take a photo.
•
•
These features are only supported on certain device models.
Changing a specific setting will sometimes cause other settings to change as well.
Adjust them according to your actual requirements.
36
Camera and Gallery
Use Pro Mode to Record Videos
1 In Pro mode, touch to switch to Video mode. You can then:
•
Adjust the metering mode: Touch M and select a metering mode.
Metering
Mode
Description
Matrix
Measures the light in the whole frame. Applicable when shooting natural landscapes.
•
•
•
•
Center
Concentrates on the light at the center of the screen. Applicable when shooting portraits.
Spot
Concentrates on the light in a small area of the screen, such as the subject's eyes.
Adjust the ISO sensitivity: Touch ISO and drag the slider.
In low-light conditions, increase the ISO sensitivity. In well-lit environments, decrease the ISO sensitivity to avoid image noise.
Adjust the shutter speed: Touch S and drag the slider.
The shutter speed affects the amount of light allowed to enter the camera lens. When you are shooting stationary scenes or portraits, decrease the shutter speed. When you are shooting moving scenes or objects, increase the shutter speed.
Adjust EV exposure compensation: Touch EV· and drag the slider.
Increase the EV value in low-light conditions and decrease the EV value in well-lit environments.
Adjust the focus: Touch AF· and select a focus mode.
Focus Mode Description
AF-S (single) Applicable to stationary subjects
•
AF-C
(continuous)
Applicable to moving subjects
MF (manual) Touch the subject on which you want to focus, such as the subject's face.
Adjust the color cast: Touch WB· and select a mode.
When shooting in bright sunlight, select . In dimly-lit environments, select .
Touch to adjust the color temperature.
2 Touch to start recording.
•
•
Not all devices support these features.
Changing a specific setting will sometimes cause other settings to change as well.
Adjust them according to your actual requirements.
37
Camera and Gallery
Record Videos
Capture Video
1 Open Camera and select Video mode.
2 Adjust the following settings:
•
Zoom in or out: Pinch in or out on the viewfinder, or drag the zoom slider.
•
Focus: Touch the location you want to focus on. Touch and hold the viewfinder to lock the exposure and focus.
•
Turn the flash on or off: Touch and select (steady on) or (off).
When using the front camera to record videos in low-light conditions, you can set the flash to (steady on). The camera will provide light compensation.
•
Adjust beauty effects: Touch and drag to adjust the effects.
•
Adjust the video resolution and frame rate: Go to > Video resolution and select the desired resolution. A higher resolution will result in a higher quality video with a larger file size.
You can touch Frame rate to select your desired frame rate.
•
Select a space-saving video format: Touch and toggle on the Efficient video
format switch.
When this feature is enabled, your phone will use a video format that takes up less storage space. However, videos in this format may not play on other devices. Please exercise caution when selecting this option.
•
•
Not all devices support these features.
Changing a specific setting will sometimes cause other settings to change as well.
Adjust them according to your actual requirements.
3 Touch to shoot.
When recording videos with the rear camera, you can touch and hold or to zoom in or out.
Touch to take a shot of the current frame.
4 Touch to pause and touch to stop shooting.
Shoot 4K UHD Videos
Your phone supports 4K Ultra HD (UHD) video recording, allowing you to record in even greater clarity.
38
Camera and Gallery
1 Open Camera and select Video mode.
2 Go to > Video resolution and select the 4K resolution.
Beauty mode, filters, and special effects are not supported at 4K, and will be automatically disabled when you select the 4K resolution.
3 Return to the Video screen and touch to start recording.
A higher resolution will result in a higher quality video, but will also take up more storage space.
Slow-Mo Recording
Shoot Slow-Mo Videos
Use Slow-mo mode to capture fleeting moments in detail. Adjust the slow motion speed based on how slow you want your footage to appear. With a higher speed you'll get slower playback.
The available slow motion speeds vary by device.
•
•
256x: suitable for recording shooting, explosion, or other extreme fast-paced action scenes.
128x or 64x: suitable for recording balls being hit and racing.
•
•
32x or 16x: suitable for recording bubbles popping and water splashing.
8x or 4x: suitable for recording breakdowns of fast movements, such as diving into water and a football being kicked. You can customize the overall shooting length and the length of the slow-mo portion.
For best results, shoot the slow-mo videos in bright and natural lighting.
Shoot Slow-Mo Videos
1 Go to Camera > More and select Slow-mo mode.
2 Touch and select a slow motion speed.
3 Frame your subject within the viewfinder, then touch to start recording.
Time-Lapse Photography
Use Time-Lapse to Create a Short Video
You can use Time-lapse to capture images slowly over several minutes or even hours, then condense them into a short video. This allows you to capture the beauty of change – blooming flowers, drifting clouds, and more.
1 Go to Camera > More and select Time-lapse mode.
39
Camera and Gallery
2 Place your phone in position. To reduce camera shake, use a tripod to steady your phone.
3 Touch to start recording, then touch to end the recording.
The recorded video is automatically saved to Gallery.
Adjust Camera Settings
Adjust Camera Settings
You can adjust the camera settings to take photos and videos more quickly.
The following features may not be available in some camera modes.
Adjust the Aspect Ratio
Go to Camera > > Aspect ratio and select an aspect ratio.
This feature is not available in some modes.
Enable Location Tags
To enable Location tag, enable Location Services for your phone first, then go to Camera >
. Your photos and videos will then be tagged with location information.
You can touch and swipe up on a photo or video in Gallery to view its shooting location.
To enable Location Services on your phone:
•
•
Swipe down from the upper right edge of the phone to display Control Panel, touch to expand the shortcut switches panel (depending on your device model), and enable
Location.
Go to Settings > Location and enable Access my location.
Add Device Watermarks
Enable Add watermark. Photos and videos shot with the rear camera will have a device watermark added.
Adding a device watermark to videos is not supported on certain phones.
Use the Assistive Grid to Compose Your Photos
Use the assistive grid to help you line up the perfect shot.
1 Enable Assistive grid. Grid lines will then appear in the viewfinder.
2 Place the subject of your photo at one of the intersecting points, then touch the shutter button.
40
Camera and Gallery
Use Mirror Reflection
When using the front camera, touch , then enable or disable Mirror reflection.
When Mirror reflection is enabled, the image will appear as you see yourself in the viewfinder, instead of flipped.
When Mirror reflection is disabled, the image will be flipped, so it's the opposite of what you see in the viewfinder.
Mute the Shutter Sound
Enable Mute to mute the camera shutter sound.
This feature is only available in some countries and regions.
Capture Smiles
Enable Capture smiles. The camera will take a photo automatically when it detects a smile in the viewfinder.
Use the Horizontal Level for Better Compositions
Enable Horizontal level to display a horizontal guiding line on the viewfinder.
When the dotted line overlaps with the solid line, it indicates that the camera is parallel with the horizontal level.
Customize Camera Mode Layout
You can customize the layout of the Camera mode screen based on your preferences by moving the frequently used modes to the camera home screen, or change the order of modes.
Photo, Portrait, and Video modes cannot be moved to More.
1 Go to Camera > More, and touch to enter the mode editing screen.
2 Touch and hold a mode and drag it to the desired position. You can move a mode on the
More screen to the camera home screen, move the mode on the camera home screen to
More, or adjust the layout of the mode screen based on how often you use certain modes.
Modes with a icon can be deleted by simply touching this icon.
3 Touch to save the layout.
To restore a deleted mode, go to Camera > More, touch , and then touch ADD.
Manage Gallery
Make Quick Searches in Gallery
41
Camera and Gallery
Quickly Search for Images in Gallery
Quickly locate an image by searching with keywords, such as a date, food, or category, in
Gallery.
1 Go to Gallery, touch the search bar at the top of the screen, then type in a keyword (such as "food" or "scenery") or touch a suggested word to start searching.
2 Thumbnails of images related to that keyword will be displayed, and more keywords will be suggested. Touch a suggested keyword or enter more keywords for more precise results.
Quickly Search for Videos in Gallery
Your phone automatically analyzes and categorizes videos in Gallery when charging and with the screen off. Suggested keywords will be displayed in the search bar for quick results on related topics.
1 Go to Gallery, touch the search bar at the top of the screen, then type in a keyword (such as "food" or "scenery") or touch a suggested word to start searching.
2 Thumbnails of videos related to that keyword will be displayed, and more keywords will be suggested. Touch a suggested keyword or enter more keywords for more precise results.
Key moments of videos in the search results will automatically be played in sequence for you to see a preview.
Screenshots will not be analyzed.
Edit Images
Gallery offers a wide range of editing features for images.
Basic Editing
1 Open Gallery, touch the image you want to edit, and then touch . You can then:
•
Crop and rotate: Touch Crop, select a frame, then drag the grid or its corners to select which part you want to keep. You can drag the image in the frame, or use two fingers to zoom in or out to adjust the displayed part of the image.
To rotate the image, touch Crop and drag the angle wheel to the desired orientation.
•
To rotate the image by a certain degree or mirror flip the image, touch or .
Add a filter effect: Touch Filter to select a filter.
•
•
Adjust image effects: Touch Adjust to adjust the brightness, contrast, saturation, and other aspects of the image.
Other: Touch More to edit the image in other ways, such as by adding a color splash, blur, doodle, or text element.
When using the Adjust or Filter feature, you can touch Compare to compare the image before and after editing. Comparison is not supported in some editing modes.
42
Camera and Gallery
2 Touch or to save the edits.
Add Stickers to Images
1 In Gallery, touch an image, then go to > More > Stickers.
2 Select a sticker and drag it anywhere you like. Touch and hold the dot on the corner of the sticker and drag it to resize the sticker. Touch to delete the sticker.
You can also edit the text in some types of stickers. Touch the editable area which is typically encircled with dash lines to enter the new text.
3 Touch to save your edits and touch to save the image.
Pixelate Images
1 In Gallery, touch an image, then go to > More > Mosaic.
2 Select a mosaic style and size to cover parts of the image.
3 To remove the mosaic, touch Eraser and wipe it off the image.
4 Touch to save your edits and touch to save the image.
Rename Images
1 In Gallery, touch the image thumbnail you want to rename.
2 Go to > Rename and enter a new name.
3 Touch OK.
Collage
You can use the collage feature in Gallery to quickly combine multiple images into one for easier sharing.
1 You can access the collage feature in the following ways (depending on your device model):
•
On the Discover tab, touch Create collage, select some images, then touch Create.
•
On the Photos or Albums tab, touch and hold to select some images, then go to
> Collage.
2 Select a template. You can then:
•
Relocate an image: Touch and hold the image and drag it to a different position.
•
Adjust the displayed portion of an image: Slide on the image, or pinch in or out on it so that only the part you want to see is displayed in the grid.
•
Rotate an image: Touch the image, then touch to rotate it or to flip it.
43
•
Camera and Gallery
Add or remove borders: By default, borders are displayed between images and along the grid edges. To remove them, touch Frame.
3 Touch to save the collage.
To view the saved collage, go to Albums > Collages.
Organize Albums
Organize images and videos into albums to easily sift through them.
Add Albums
1 Go to Gallery > Albums.
2 Touch , name the album, then touch OK.
3 Select the images or videos you want to add, and then move or copy them to the album.
Sort Albums
1 Go to Gallery > Albums > and touch Sort albums.
2 Hold and drag next to the albums to adjust the order.
Touch Reset or go to > Reset to restore the default order.
Adjust the Album Display Style
Go to Gallery > Albums > , touch Switch view, and select an album display style.
Change Album Covers
1 Go to Gallery > Albums and touch the album you want to set.
2 Go to > Change album cover and select the image you want to set as the album cover.
Move Images and Videos
1 Open an album, then touch and hold to select the images and videos you want to move.
2 Touch > Move to album to select the desired album.
3 Once the items are moved, they will no longer be in their original album.
The All photos and Videos albums show all images and videos stored on your device.
Moving items across albums will not remove them from these albums.
Delete Images and Videos
Touch and hold to select images, videos, or albums and go to Delete > Delete.
Some preset albums cannot be deleted, including All photos, My favorites, Videos, and
Camera.
44
Camera and Gallery
Deleted images and videos will be temporarily moved to the Recently deleted album for a period of time, after which they will be permanently deleted.
To permanently delete images and videos before the retention period expires, touch and hold to select images or videos in the Recently deleted album and go to Delete > Delete.
Recover Deleted Images and Videos
In the Recently deleted album, touch and hold to select the items you want to recover, then touch to restore them to their original albums.
If the original album has been deleted, a new one will be created.
Add Images and Videos to Favorites
Open an image or video, then touch .
The item will appear in both its original album and the My favorites album.
Hide Albums
System albums such as Camera, Videos, My favorites, and Screenshots cannot be hidden.
From the Albums tab, go to > Hidden items and toggle the switches on for albums that you want to hide.
Hidden albums and the photos and videos in them are hidden from view in Gallery.
Highlights
Introduction to Highlights
Gallery automatically creates Highlights albums from your best photos and videos based on time, location, and theme information, and even generates a short video clip so you can walk down memory lane and instantly relive the good times.
•
•
To start using Highlights, go to Camera > and enable Location tag.
Highlights albums are created automatically when your phone is charging and connected to a Wi-Fi network, the screen is turned off, and the battery has sufficient power. It may take a while for the albums to be created.
Highlights albums will not be automatically generated if there are not enough relevant photos.
View Highlights Videos
1 Go to Gallery > Highlights and touch an album.
2 Touch to play the video.
45
Camera and Gallery
Change the Highlights Album Cover
1 On the Highlights tab, touch an album.
2 Go to > Change cover, select a photo, then touch .
Share Highlights
You can share Highlights as videos or images with friends.
Share Highlights videos as videos
1 If you have edited and exported a Highlights video, the exported video can be found in
Gallery > Albums > Video Editor.
2 You can touch and hold to select the video in Video Editor and touch to share it.
Share Highlights videos as images
Touch the Highlights video you want to share, then go to > Share. Your phone will automatically generate an image for the video and you can follow the onscreen instructions to share it with others.
You can also share the photo under Gallery > Albums > Collages, where the images created for Highlights videos are saved by default.
Add or Remove Images or Videos from a Highlights Album
1 In the Highlights tab, select a Highlights album.
2 You can then:
•
•
Add images or videos: Touch and follow the onscreen instructions to select images or videos to be added to the album.
Remove images or videos: Touch and hold to select the images or videos you want to remove from the album, touch , then touch Remove.
Rename Highlights Albums
1 On the Highlights tab, touch an album.
2 Go to > Rename and enter a new name.
Delete Highlights Albums
1 On the Highlights tab, select a Highlights album.
2 Go to > Delete and then touch Delete.
After you delete a Highlights album, it cannot be restored, and the photos and videos in the Highlights album will remain in Gallery.
46
Apps
MeeTime
Use MeeTime to Make Calls
Use MeeTime to make high-quality video or voice calls with contacts who have Huawei devices (such as phones and tablets), and share your screen during calls.
Thanks to the GPU Turbo technology, the video call resolution will be optimized automatically when the network signal is weak. With intelligent algorithms, the other party can see your face clearly even when making a video call at night or in dark environments.
•
Please make sure your device has been updated to the latest system version.
•
This feature is only available in some countries and regions.
•
If your phone is not pre-installed with the MeeTime app, download it from
AppGallery.
•
•
Charges for MeeTime
MeeTime only uses Wi-Fi or mobile data and will not be charged as calls by your carrier. It is recommended that you use this feature over a Wi-Fi network.
If you need to make a video call using mobile data, you can perform the following to save on the amount of mobile data you use: On the MeeTime screen, touch your profile picture in the upper right corner to access the Settings screen, then turn on the Data saver switch.
Make a High-quality Video or Voice Call
Use MeeTime to make smooth and high-quality calls between Huawei devices such as phones and tablets. You can enjoy clear video calls even in dark environments and adjust the beauty level during video calls.
1 Open MeeTime and follow the onscreen instructions to activate and enable it.
2 In the MeeTime app, go to Contacts > MeeTime, and touch or next to a contact who has enabled MeeTime on their devices to make a high-quality video or voice call.
3 During a video call, touch the screen and then touch > to access the Soften function. Drag the slider left or right to adjust the beauty level.
•
For better video calls, keep your phone within 1 meter (3.3 feet) of you and ensure that you are in a bright environment.
•
The beauty level adjustment feature is only supported by some products.
4 You can touch and then perform the following:
47
Apps
•
Touch to mute MeeTime.
•
Touch to use the speaker.
•
Touch to switch to a voice call.
•
Touch to share the screen.
To view or manage your call logs, touch Calls.
Share Your Phone Screen During a MeeTime Call
During a MeeTime video call, you can share your screen with the other party and doodle on the screen. The other party will then be able to view your screen and your doodles on it.
1 During a video call, touch the screen, go to > , and follow the onscreen instructions to share your screen.
While sharing your screen, touch to start doodling on your screen.
2 Touch to exit screen sharing.
Set MeeTime Phone Numbers
You can use MeeTime with more than one of your phone numbers.
1 On the MeeTime screen, touch your profile picture icon in the upper right corner to access the Settings screen.
2 Touch Number settings. You can then:
48
Apps
•
Touch to add another phone number if only one phone number has been linked.
•
•
Touch to delete any numbers or add new ones if multiple phone numbers have been linked.
In the list of Outgoing number (this device), select one of the added phone numbers to set it as the default number.
Notepad
Create a Note
To help you quickly keep a track of your thoughts and inspirations, you can create notes using the Handwrite (to write or draw the content) and Scan document modes, or in conjunction with Multi-Screen Collaboration.
Add Content to a Note
1 Go to Notepad > Notes and touch .
2 Enter the title and content of the note. You can then perform the following:
•
Touch to add a checklist.
•
Touch to change the text style, paragraph alignment, and background.
•
•
Touch to insert a picture. Touch and hold the picture, then drag it to the desired position in the note.
To organize your notes for easier access and viewing, categorize a note after finishing it.
3 Touch to save the note.
Add a Note by Scanning Documents
1 Open Notepad and go to Notes > > > Scan document.
2 Align your device camera with the picture or file you want to scan and touch to start scanning. The scanned pages are saved in Notepad.
3 Go to Extract text > Save > Save images and text > to save the note.
If your phone does not have this option, it indicates that this feature is not supported.
Create Notes by Scanning Certificates or Cards
You can scan certificates or bank cards for future use and add watermarks to prevent theft.
49
Apps
1 Open Notepad and go to Notes > > > Add card.
2 Point the camera to the certificate or bank card you want to scan, and touch to scan it one by one or consecutively. Touch to preview the scanned copies.
3 (Optional) If you manually unskew the scanned copies, touch to preview them again.
4 To add a watermark to the scanned copies, touch Full-screen watermark or Single
watermark.
5 Touch to insert the modified scanned copy into the note.
6 Touch to save the note.
Add a Handwritten Note
You can add a handwritten note to write down thoughts and inspirations that would be difficult to convey through text.
1 Go to Notepad > Notes and touch .
2 Touch to write or draw the content you want to note down in the selected color.
3 Touch to save the note.
Create Notes by Sharing
You can share web pages, images, text, and other content from other apps to Notepad.
Not all apps support this feature.
1 Open the content you want to share (such as a web page, image, or text) in an app that supports the sharing feature.
2 Touch the Share button and select Notepad.
3 Follow the onscreen instructions to save the shared content to an existing note or create a new note.
Create To-dos
You can create to-dos to keep a track of day-to-day essentials, such as daily shopping lists, tasks at work, and household chores.
Add a To-do Item and Set a Reminder
You can add a to-do item and set a time reminder for it.
If you have marked the to-do item as important, you will be prompted with a full-screen reminder when the screen is locked.
1 Go to Notepad > To-dos and touch .
50
Apps
2 Enter your to-do item.
3 Touch , set a reminder time, then touch OK.
4 Touch to mark the to-do item as important.
5 Then touch Save.
Set Repeated Reminders for a To-do Item
If you specify a time for a to-do item, you can select a repeat mode for it (for example,
Never, Every day, Every week, Every month, or Every year), and your phone will repeatedly prompt you to complete the to-do item at the specified time.
Manage Your Notepad
You can sort your Notepad items by category and put them into different folders, delete unwanted items, and share items with other people.
When viewing a list of items or an individual item in Notepad, touch the status bar at the top of the screen to quickly return to the first item or the beginning of the item you are viewing.
Use App Lock for Notepad or Lock a Note
You can apply App Lock to Notepad or set a password for a note to protect your privacy.
Enable the app lock for Notepad: Go to Settings > Security > App Lock, enter the lock screen password or customize the app lock password as prompted, and then turn on the switch next to Notepad.
Lock a note: Open the note you need to lock in Notepad, go to > Add lock, and follow the onscreen instructions. To unlock your note, go to > Remove lock.
If your device supports fingerprint or face unlock, you can use fast authentication by performing the following: Go to Notepad > > Settings > Note lock, then enable Unlock
with Fingerprint ID and Unlock with Face Recognition.
Sort Notepad Items
Add notes and folders in Notepad, sort the notes or to-dos into categorized folders, and even add color-coded labels.
•
Add folders or notes:
Add folders: Touch All notes or All to-dos, and go to Manage > New folder. Rename it and touch Save.
•
Add notes: Touch All notes or All to-dos, open a folder, and touch New. Select a color label, rename it and touch Save.
To rename or delete a folder or note, touch All notes or All to-dos, and go to Manage >
Edit. Then touch the folder or note name to rename or delete it.
51
Apps
Sort notes or to-dos:
•
On the All notes screen, swipe left on an item, and touch or to pin it to the top or add it to favorites.
To view favorited items, touch All notes and go to My favorites.
•
•
On the All notes or All to-dos screen, swipe left on an item, and touch to sort it to your desired notebook.
Touch and hold down on a note or to-do item, select the items you wish to classify under the same category, and touch to move them to the target category.
Folders and Items in Exchange accounts cannot be edited.
Sync Notepad Items
Sync Exchange email data: You can sync the data in your Exchange account to Notepad to record important events anytime and anywhere.
1 Log in to Exchange on your phone.
2 Swipe down from the Exchange mail list to sync the notes and tasks from your Exchange account to Notepad. The corresponding notes and to-do items will then be generated automatically.
A folder named after the Exchange account will also be automatically generated for easy management.
Share and Export Notepad Items
Share notes or to-dos in Notepad with colleagues or loved ones, and even export notes in image, TXT, and other formats.
•
You can share notes or to-dos in the following ways:
To share a single note or to-do item: Open the item you wish to share from the All notes
• or All to-dos screen, and then touch and share it as prompted.
Notes can be shared by touching Share as image, Share as text, or Send to another
device.
To share multiple notes: Access the All notes screen, touch and hold down on a note, select the items you wish to share, and then touch and share them as prompted.
You can export notes in any of the following ways:
•
Export as an image: Open the note you wish to export, and go to > Share as image >
Save image. You'll find the exported file in Gallery.
•
Export as a document: Open the note you wish to export, go to > Export as
document, and follow the instructions to select the document format you need.
52
To view notes that you have saved, open Files, search for and access Documents, then touch NotePad.
The Export as document feature is not applicable to handwritten-only notes. Other types of notes can be exported into TXT or HTML files.
Apps
Print Notepad Items
1 On the All notes screen, open the item you want to print.
2 Go to > Print, then select a printer and configure printing settings as prompted.
Delete Notepad Items
You can delete Notepad items in either of the following ways:
•
•
On the All notes or All to-dos screen, swipe left on an item, and touch to delete it.
Touch and hold down on the note or to-do item you wish to delete, select or drag over the check boxes of any other notes or to-do items that you wish to delete as well, then touch
.
After deleting an item, you can touch All notes or All to-dos and go to Recently deleted to find the deleted item. To restore a deleted item, touch and hold down on it, or go to its details screen and touch .
Compass
Compass
View Directions and Coordinates Using Compass
Compass shows you the direction your phone is pointing, as well as your current longitude and latitude.
1 You can open Compass in the following ways:
•
•
Swipe down from the middle of the home screen to display the search box and search for Compass. The first result will be the preinstalled Compass app.
Find Compass in the Tools folder.
2 You can view directions and coordinates in the following ways:
•
•
If you hold your phone flat, the Compass screen will display a dial together with the direction your phone is pointing and your current coordinates.
If you hold your phone upright, the Compass screen will display the viewfinder of the rear camera on your phone, together with the direction your phone is pointing and your current coordinates.
53
Apps
To lock your current direction, touch the compass dial. The dial marks will turn blue if you go off course.
For more accurate bearings, hold your phone flat or upright when using Compass.
54
Settings
Display & Brightness
Use Eye Comfort Mode
Eye comfort mode can effectively reduce harmful blue light and adjust the screen to display warmer colors, relieving eye fatigue and protecting your eyesight.
•
Enable or Disable Eye Comfort Mode
Swipe down from the upper right edge of the screen to display Control Panel and touch
•
to expand the shortcut switches panel (depending on your device model). Enable or disable Eye Comfort. Touch and hold Eye Comfort to access the settings screen.
Go to Settings > Display & brightness > Eye Comfort and enable or disable Enable all
day.
Once Eye Comfort mode is enabled, will be displayed in the status bar, and the screen will take on a yellow tint since less blue light is being emitted.
Set a Schedule for Eye Comfort Mode
Go to Settings > Display & brightness > Eye Comfort, enable Scheduled, then set Start and
End according to your preferences.
Adjust the Blue Light Filter in Eye Comfort Mode
Go to Settings > Display & brightness > Eye Comfort, enable Enable all day or set up
Scheduled, and adjust the slider under Filter level to customize how much blue light you would like to be filtered.
Biometrics & Password
Set Fingerprints
You can enroll a fingerprint and then use it to unlock the screen and access your Safe, App
Lock, and more.
Add Fingerprints
1 Go to Settings > Biometrics & password > Fingerprint ID or Settings > Biometrics &
password > Fingerprint ID > Fingerprint management (depending on your device model), and follow the onscreen instructions to set or enter the lock screen password.
2 Touch New fingerprint or New rear fingerprint (depending on your device model) to begin enrolling your fingerprint.
55
Settings
3 Place your fingertip on the fingerprint sensor. When you feel a vibration, lift your finger and then press down again. Move your finger around until the entire fingerprint is captured.
4 Once enrollment is complete, touch OK.
You can now place your finger on the fingerprint sensor to unlock the screen.
Rename or Delete a Fingerprint
1 Go to Settings > Biometrics & password > Fingerprint ID or Settings > Biometrics &
password > Fingerprint ID > Fingerprint management(depending on your device model) and enter your lock screen password.
2 In the Fingerprint list section, touch an enrolled fingerprint to rename or delete it.
Fingerprint Identification
Fingerprint identification allows you to match your fingers with the enrolled fingerprints.
1 Go to Settings > Biometrics & password > Fingerprint ID or Settings > Biometrics &
password > Fingerprint ID > Fingerprint management(depending on your device model) and enter the lock screen password.
2 In the Fingerprint list section, touch Identify fingerprint.
3 Touch the fingerprint sensor with your finger. The recognized fingerprint will be highlighted.
Use Your Fingerprint to Access Your Safe
1 Go to Settings > Biometrics & password > Fingerprint ID or Settings > Biometrics &
password > Fingerprint ID > Fingerprint management(depending on your device model) and enter your lock screen password.
2 Turn on the switch for Access Safe and follow the onscreen instructions to link your fingerprint with the Safe.
Now you can go to Files > Me, touch Safe, then use your fingerprint to access it.
Please make sure your device has been updated to the latest system version.
Use Your Fingerprint to Access a Locked App
1 Go to Settings > Biometrics & password > Fingerprint ID or Settings > Biometrics &
password > Fingerprint ID > Fingerprint management(depending on your device model) and enter the lock screen password.
2 Turn on the Access App Lock switch and follow the onscreen instructions to link your fingerprint with App Lock.
You can then touch a locked app on your home screen and use your fingerprint to access it.
Enable and Use Fingerprint Payment
You can use your fingerprint to verify your payments in a payment app.
Go to the payment app and follow the onscreen instructions to enable this feature.
56
Face Recognition
Face Recognition allows you to unlock your phone or access locked apps with your facial data.
Settings
Set up Face Recognition
1 Go to Settings > Biometrics & password > Face Recognition, and enter your lock screen password.
If you haven't set the lock screen password, follow the onscreen instructions to do so.
2 Some phones support screen wakeup when you raise the device. If you can find the
Enable raise to wake setting option on your device, you can enable it as needed.
The settings items vary by device. If your phone does not provide a specific item, it indicates that the corresponding feature is not supported.
3 Touch Get started, position your face in front of your phone, and follow the onscreen instructions to enroll your facial data.
Set Face Unlock
On the Face Recognition screen, touch Unlock device and select an unlock method.
Some phones support Require eye contact. When this is enabled, you will need to keep your eyes open while unlocking the device with your face. If you can't find this switch on your device, it means that this feature is not supported.
If you have enabled PrivateSpace, you'll only be able to use Face unlock in MainSpace. If you have added multiple users, you'll only be able to use Face unlock with the Owner account.
Access App Lock with Face Recognition
On the Face Recognition screen, enable Access App Lock, and follow the onscreen instructions to add your facial data to App Lock.
You can then touch a locked app on your home screen and use face recognition to access the app.
Link Your Face with Password Vault
Access the Face Recognition screen and enable Autofill usernames and passwords.
When logging in to an app, you can use Face Recognition to automatically fill in the account name and password saved in Password Vault.
Bolster Your Device Security, with Face Recognition
Enable Require trusted device when using Face unlock to ensure that your phone will only unlock when it detects your face and is connected to a trusted device.
This feature is disabled by default. To enable it, go to the Face Recognition settings screen, touch Require trusted device, turn on the Require trusted device switch, and follow the onscreen instructions to complete the settings.
57
Settings
A trusted device can be any Bluetooth device that can be used for unlocking purposes, such as earphones, a watch, or a band.
Disable or Delete Facial Data
•
•
Go to the Face Recognition screen to:
Prevent certain features from accessing your facial data: Disable Unlock device, Access
App Lock, or other features, to prevent them from using your facial data. Doing so won't delete your facial data.
Delete facial data: Touch Delete facial data to delete your facial data. You'll have to enroll your face once again if you want to use the facial recognition feature later on.
Security
Set a SIM PIN Lock
A PIN is the identity code of a SIM card, and can be set as the SIM card lock. After you set it up, you will be required to enter the correct PIN to unlock the SIM card every time you power on your phone or switch to a new phone to prevent unauthorized access.
If you have entered a wrong PIN and exceeded the maximum number of attempts allowed to unlock the PIN, you will need to enter the PIN Unlocking Key (PUK) then reset the PIN. If you exceed the maximum number of attempts allowed to unlock the PUK, your SIM card will be permanently blocked.
The PIN and PUK of your SIM card are provided by your carrier. The number of digits and maximum number of attempts allowed to unlock your PIN and PUK are subject to your carrier.
1 Go to Settings > Security > More settings to enter the SIM lock settings screen.
2 Enable Lock SIM card, enter the PIN, then touch OK.
To change the PIN, touch Change SIM PIN, and follow the onscreen instructions.
About Phone
Legal Notice
Copyright © Huawei 2022. All rights reserved.
58
This guide is for reference only. The actual product, including but not limited to the color, size, and screen layout, may vary. All statements, information, and recommendations in this guide do not constitute a warranty of any kind, express or implied.
Please visit https://consumer.huawei.com/en/support/hotline for recently updated hotline and email address in your country or region.
Model: VCE-L22
EMUI 12.0_01
advertisement
Key Features
- 16.3 cm (6.4") 2310 x 1080 pixels LTPS
- Hi-Silicon Kirin 970 2.36 GHz
- 128 GB
- 4G NanoSIM
- 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) Bluetooth 4.2
- Triple camera 20 MP 16 MP 2 MP
- 3750 mAh
- Android 9.0 EMUI 9.0
Related manuals
advertisement