OPERATION –

ULTRA r

MAX

–

–

695/795/1095/1595/Mark V –

All models not available in all countries.

3300 psi (227 bar, 22.7 MPa) Maximum Working Pressure

Related manuals

. . . . . . . 309251 (695/795/1095)

. . . . . . . 309266 (1595/Mark V

AutoClean

. . . . . . . 309278 . . . . . . .

)

309250

. . . . . . . 309639 . . . . . . . 309640

INSTRUCTIONS

READ ALL INSTRUCTIONS AND WARNINGS

BEFORE SETTING UP OR OPERATING THIS UNIT.

You need:

S two adjustable wrenches

S two 5 gallon (19 liters) metal pails

S compatible cleaning fluids

Oil Base Latex

Power:

Japan: grounded outlet

100V, 15A

United Kingdom: 110V, 15A

North/Latin Am: 120V, 15A

Europe/South Am: 230V, 10A

Australia/Asia: 240V, 10A

S

12 AWG, (1.5 mm

2

) grounded extension cord up to

300 feet (100 M)

Clothing:

S respirator

S safety glasses

3Z9257

Rev. B

B

245000

TI0765A

. . . . . . . 309252

. . . . . . . 309260

. . . . . . . 309267

309263

309261

309268

(695)

(795/1095)

(1595/Mark V)

GRACO INC.

P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441

Graco Inc. is registered to I.S. EN ISO 9001

WARNING

Fire and explosion hazard: Solvent and paint fumes can ignite or explode.

To help prevent a fire and explosion:

D Use only in an extremely well ventilated area.

D

Eliminate all ignition sources; such as pilot lights, cigarettes and plastic drop cloths (static arc hazard). Do not plug or unplug power cords or turn lights on or off in spray area.

D

Ground Sprayer, object being sprayed, paint and solvent pails.

D

Hold gun firmly to side of grounded pail when triggering into pail.

D Use only conductive airless paint hose.

D

Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents in pressurized aluminum equipment. Such use could result in a chemical reaction, with the possibility of explosion.

Fluid injection and high pressure hazard: High pressure spray or leaks can inject fluid into the body.

To help prevent injection, always:

D

Engage trigger safety latch when not spraying.

D Keep clear of nozzle and leaks.

D Never spray without a tip guard.

D

Do PRESSURE RELIEF if you stop spraying or begin servicing sprayer.

D Do not use components rated less than sprayer Maximum

Working Pressure.

D

Never allow children to use this unit.

If high pressure fluid pierces your skin, the injury might look like

“just a cut”. But it is a serious wound! Get immediate medical attention.

2 3Z9257

Pressure Display /

On/Off Switch /

/

15/20 Ampere Switch

Drain Valve /

/

AutoClean t

309278

Pressure Control /

/

PRESSURE RELIEF /

Follow 1–5 when you stop spraying.

1

/

Trigger Lock /

/

Contractor II

Contractor

/

2

3 4 5

Contractor II

Contractor

3Z9257 3

STARTUP /

Flush with warm, soapy water.

1

/

WARNING

/

2 3

Flush with mineral spirits.

4

Flush /

WARNING

/

5

/

6

10”

7

8

WASTE

FLUSH

20”

9

WASTE

Prime /

WARNING

12

1’

10

WASTE

10”

11

FLUSH

13

/

14

FLUSH

15

FLUSH

WASTE

PAINT

Watch for paint.

4 3Z9257

Watch for paint.

SPRAY /

WARNING

1

/

2

/

3 4

CLEAR CLOG /

WARNING

1 2

/ /

3

CHANGE PAINT /

1

Pressure Relief

/ /

2

AutoClean

t

309278

3

or Flush

Prime

1

GROUNDING /

WARNING

Grounded Outlets Required

2 3

3Z9257 5

1

SHUTDOWN / /

2

AutoClean

t

Pressure Relief

309278 or 3–22

3

WARNING

/

4 5

6

11

FLUSH

7

12

8

Flush

9

13

FLUSH

20”

10

Pressure Relief

14

15 16 17 18

20”

19

Pressure Relief

20

6 3Z9257

Mineral Spirits

21

Mineral Spirits

22

WASTE

DISPLAY /

ERROR CODES /

Service manual

PRESSURE

TIMER

GAL/LTR

High pressure limit

/

Transducer fault /

High line voltage

High current

Motor overheated

> 2000 psi in

Timer Mode

Low line voltage

Turn power OFF/ON to reset

Service

Noise

Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

91 dB(A)*

82 dB(A)*

* ISO 3744

PRESSURE

GAL/LTR

TIMER

– –

AutoClean

t

309278

91 dB(A)*

82 dB(A)*

91 dB(A)*

82 dB(A)*

Graco Standard Warranty

Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written recommendations.

This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non–Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of

Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.

THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT

NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE .

3Z9257 7

Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.

GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD

BUT NOT MANUFACTURED BY GRACO . These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties.

In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or otherwise.

FOR GRACO CHINESE, JAPANESE AND KOREAN CUSTOMERS

The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English.

ADDITIONAL WARRANTY COVERAGE /

Graco does provide extended warranty and wear warranty for products described in the “Graco Contractor Equipment Warranty

Program”.

TO PLACE AN ORDER OR FOR SERVICE , contact your Graco distributor, or call 1–800–690–2894 to identify the nearest distributor.

All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.

8 3Z9257

Sales Offices: Minneapolis, Detroit

Foreign Offices: Belgium, Korea, Hong Kong, Japan

GRACO INC.

P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441 http://www.graco.com

PRINTED IN USA 309257 December 2000, revised 12/2002