Belkin N600 DB User manual
Belkin N600 DB is a wireless router that provides fast and reliable internet access for your home or small office. With N+ technology, it offers speeds of up to 600Mbps, making it ideal for streaming HD video, gaming, and downloading large files. It also features four Gigabit Ethernet ports for wired connections, a USB port for connecting a printer or external hard drive, and support for guest networks and parental controls.
Mainos
Mainos
Wireless N+ rOUTer
N600 DB
User Manual
F9K1102V3 8820xx01233xx Rev. A00
English
Table Of COnTenTs
Connect Your Wireless Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
aDDITIOnal CaPabIlITIes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Getting to Know Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Technical Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
UsInG YOUR ROUTeR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Enabling Auto Update on Your Belkin Router . . . . . . . . . . . . . . . . . . . . . 37
Updating the Router’s Firmware via the Web Interface . . . . . . . . . . . . 39
Restoring Your Router to Factory Defaults . . . . . . . . . . . . . . . . . . . . . . . 42
Restoring the Router to Default Settings Using the Web Interface . . . 43
Troubleshooting, support, and Warranty . . . . . . . . . . . . . . . . . . . 45
Belkin International, Inc ., Limited 2-Year Product Warranty . . . . . . . . . 53
Regulatory and safety Information . . . . . . . . . . . . . . . . . . . . . . . . . 56
Europe – EU Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . 57
General Safety Information: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
GettInG StaRted
What’s in the Box
N600 DB Wireless N+ Router
Ethernet cable (attached to router)
Power supply (attached to router)
Network information card (attached to router)
Quick Setup Guide
Initial Setup
Where to Place Your Router
For the best results, place the Router next to your modem in an open location, away from large metal objects and magnets such as those found in speakers. Raising the Router above floor level can improve the strength of your wireless signal.
1
GettInG StaRted
How to Set It Up
Connect Your n600 dB Router
Turn off your modem by disconnecting its power supply. Some modems have a battery backup; this will need to be disconnected at this time as well.
Connect your Router to your modem using the cable
(already attached).
Power up your modem by plugging in its power supply. If your modem has a battery backup, it can be reconnected at this time; you may need to hold the reset button for 10 seconds.
Power up your Router by plugging in its power supply.
2
GettInG StaRted
Connect to Your Router
Retrieve the network ID card from the foot of your new Belkin Router.
Can’t find the card? The default network name and password are also printed on the foot of the Router.
Use your computer, tablet, or smartphone to connect to the wireless network shown on the network ID card.
For information on how to connect your wireless devices, please see the “Connect Your Wireless Devices” section on page 20.
When requested, please enter the password
(security key) provided on the card.
When your device has connected to the Router, use a browser to visit http://router/. The router homepage will appear.
3
GettInG StaRted
If the page does not load, then try visiting http://192.168.2.1 to see the router homepage.
Click the “Detect my connection” button in green. (If you would rather set up the Router manually, click the
“set it up manually” link and proceed to page 11.)
After several moments, your Router should automatically detect your Internet connection and restart. This can take anywhere from
30 seconds to 3 minutes depending on your connection type.
If your Router is unable to establish an Internet connection on its own, you may be asked to restart your modem or provide a username and password if your connection requires one. Follow the on-screen instructions provided.
4
GettInG StaRted
Once your Router is online, it will determine if there is a firmware update available and offer to install it. Please allow up to 5 minutes for the firmware to update.
5
GettInG StaRted
If there are no updates available, then setup will proceed.
6
GettInG StaRted
At the next screen you will be invited to change your network name and password. Re-using your previous network name (SSID) and password makes connecting your existing devices to the new router much easier.
If you decide to change these settings, then enter the new values and click “Save and Continue.” (Note: The password must be at least 8 characters long.)
If you changed your network name and password, make note of it on the service card located on the foot of the Router.
You will then have to connect to the new network.
7
GettInG StaRted
Please take this opportunity to register your Router. This will help technical support if there is a problem with your Router.
Simply complete each of the required fields and click
“Complete Registration.” If you don’t want to register right now, click “Register Later” to proceed.
8
GettInG StaRted
At the next screen you can download optional software that was bundled with your Router.
This screen shows you optional software that is available for your Router, such as the USB software to allow you to print through the Router’s USB port. If you wish to download and install any of these software programs, simply click on the button appropriate for your device.
When finished installing optional software, click
“Thanks, take me to the dashboard.”
Congratulations! You are now at your Router’s dashboard.
Your Router is set up and ready to use.
9
GettInG StaRted
Using the WPS Button
1. Start WPS Push Button Connection (WPS PBC) on your computer or other Wi-Fi device that you would like to connect wirelessly to your Router. Often there will be a button for this purpose in software that came with the device, or a physical
“WPS,” “PBC,” or “Security” button on the device itself.
2. Within two minutes, press the WPS button on your Router.
The WPS light (small light above WPS button) will blink blue while it listens for your Wi-Fi device. Once a connection is established, the light will turn blue and then go out. If a connection is not established, the light will blink amber. You may repeat the process to try again.
You can repeat this process for each WPS-enabled device you’d like to add to your network.
10
GettInG StaRted
Manually Set Up Your Internet Connection
Use a browser to visit http://router/. You can also try visiting http://192.168.2.1/. The Router’s Welcome page should appear.
Click the “Set it up manually” link. Please select the type of connection your ISP provides. Refer to page 16 for a description of the connection types.
11
If the selected connection type requires additional information (such as an ISP username and password), the system will ask you for it.
At the next screen you will be invited to change your network name and password. Reusing your previous network name (SSID) and password makes connecting your existing devices to the new router much easier.
GettInG StaRted
If you decide to change these settings, then enter the new values and click “Save and Continue.” (Note: The password must be at least 8 characters long.)
If you changed your network name and password, make note of it on the service card located on the foot of the Router. You will then have to connect to the new network. Please refer to page 20 to do this.
Click “Great, what’s next?”
12
GettInG StaRted
Please take this opportunity to register your Router. This will help technical support if there is a problem with your Router.
Simply complete each of the required fields and click
“Complete Registration.” If you don’t want to register right now, click “Register Later” to proceed.
At the next screen you can download optional software that was bundled with your Router.
This screen shows you optional software that is available for your Router, such as the USB software to allow you to print through the Router’s USB port. If you wish to download and install any of these software programs, simply click on the button appropriate for your device.
When finished installing optional software, click
“Thanks, take me to the dashboard.”
13
GettInG StaRted
Congratulations! You are now at your Router’s dashboard.
Your Router is now set up and ready to use.
The status of your Internet connection is shown in the upper left corner of the Router’s homepage.
If it does not say “Online,” troubleshooting information will be displayed.
14
GettInG StaRted
Manually Configuring Your Router’s Internet from the dashboard
To set up your ISP connection manually, select “Connection
Type” from the list under the header Internet WAN.
15
GettInG StaRted dynamic Connection
Cable and fiber customers generally require a dynamic connection.
Some DSL customers require a PPPoE connection. Let’s try dynamic first. Select “Dynamic” from the menu that appears and press “Next.”
16
GettInG StaRted
A host name is generally not required. Hit
“Save.” The Router will restart.
17
If after a few minutes your Internet Status says
“Online,” you’re done! You can surf the Internet.
If these steps do not work, try restarting your modem and repeating the process.
If not, we’ll try a PPPoE connection next.
GettInG StaRted
PPPoe Connection
Some DSL customers require a PPPoE connection.
Select PPPoE this time and press “Next.”
18
GettInG StaRted
Enter the username and password supplied by your
Internet provider and click “Save.” Ignore the other fields unless required by your ISP. The Router will restart.
If after a few minutes your Internet Status says
“Connected,” you’re done! You can surf the Internet.
If these steps do not work, try restarting your modem and repeating the process.
19
GettInG StaRted
Connect Your Wireless devices
iOS
(iPhone, iPad, and iPod touch)
1. Open the Settings app and select the Wi-Fi menu item.
2. Select your wireless network from the list that appears there. If asked to do so, enter the network password.
Mac OS ® X
Your Mac
®
provides a menu of available wireless networks at the right end of the menu bar.
1. Click on the icon showing wireless waves.
2. Select your wireless network from the list that appears there. If asked to do so, enter the network password.
Android
™
(phones and tablets)
1. Open the Settings app and select Wireless and Network.
2. From there, select Wi-Fi to see the list of available networks.
3. Select your wireless network from the list. If asked to do so, enter your network password.
20
GettInG StaRted
Windows
®
7
Your computer provides a menu of available wireless networks at the right end of the task bar.
1. Left-click on the icon that looks like signal strength bars.
2. Select your wireless network from the list. If asked, enter your network password (network key).
Windows Vista
®
and Windows XP
Your device provides a menu of available wireless networks at the right end of the task bar.
1. Right-click on the icon that shows a computer with wireless waves (XP) or two computers (Windows Vista).
2. Choose “View Available Wireless Networks (XP)” or
“Connect to a network (Vista)” from the menu.
3. Select your wireless network from the list. If asked, enter your network password (network key).
21
Adding USB Devices
22
ADDITIONAL CAPABILITIES
Adding a Drive
You can share a USB hard drive or flash drive to your network via your Router’s USB port. Once connected, you can share files and music with other computers and devices within your network.
Plug your USB hard drive into the USB port on the back of your Router.
You can manually check the status of your shared drive by visiting the USB Print and Storage Manager. If you have difficulty sharing a drive on your network, please see the “Troubleshooting” section of this manual.
A few USB hard disks require more power than the Router’s USB port provides. In these cases, you may notice the drive failing to come on or remaining on for a short time. If your disk has an optional power supply, please use it while the disk is attached to your Router.
Adding a Printer
You can add a printer to your network via your Router’s
USB port. Once connected, you can print from various computers and wireless devices within your network.
Plug your printer’s USB cable into the USB port located on the back of your Router.
You can manually check the status of your printer by visiting the USB Print and Storage Manager, found under the Belkin icon displayed in your system tray (Windows) or menu bar
(Mac). If you have difficulty sharing a printer on your network, please see the “Troubleshooting” section of this manual.
Note: Each computer that will use the printer must have both the Belkin software and the printer’s driver installed.
If the print driver is not installed, you will be asked to install it by the Belkin USB Print and Storage Manager.
23
ADDITIONAL CAPABILITIES
Adding Other USB Devices
Other USB devices may also be shared via your Router. Plug your device into the USB port located on the back of your Router.
Computers running the Belkin USB Print and Storage
Manager will be able to make use of the shared device.
24
ADDITIONAL CAPABILITIES
Bundled Software
USB Print and Storage Manager
The USB Print and Storage Manager helps to manage and monitor the use of your USB printers, scanners, hard drives, and other devices that are connected to your
Router’s USB port and shared across your network.
25
ADDITIONAL CAPABILITIES
Guest Access
You can allow guests to use your Internet connection without joining your personal network. The network name and password for the guest network is located on the network information card found under the foot of your Router.
A person using your guest network will be able to join without a password, but will be shown a login page when they attempt to surf the Web. They will need to enter the guest password into this page to continue.
26
ADDITIONAL CAPABILITIES
Media Server by myTwonky
Media Server by myTwonky lets your Router stream music, movies, and photos to different DLNA/UPnP devices on your network.
In order to use Media Server by myTwonky, you will need to insert a USB storage device with media content into a free USB port on the back of your Router. Your Router will begin to make your content available to other devices on your network automatically.
If you want to configure Media Server by myTwonky, visit http://router/ and choose “Media Server.”
There are several settings in the configuration page:
DLNA Server: Enables or disables your media server
Server Name: The name under which other devices will see your content
Refresh: Re-scans your USB storage devices for media content
Shared Drives: Shows information about and status of each of your attached drives. You can see the name of the drive, its capacity, and whether media is being served from it or not.
When you click “Save,” your Router will save your changes.
27
ADDITIONAL CAPABILITIES
Website Filters. Powered by Norton
Web filters provide a first layer of whole-home Internet protection to guard you from unsafe and inappropriate websites on any device on your network.
There are four different filtering options:
1. Block malicious, adult, and other non-family-friendly sites
2. Block malicious and adult sites
3. Block malicious sites
4. No filters
If you think a site should be added to the filtering list, submit a request at safeweb.norton.com.
Content filtering may not work as intended if:
1. You are connecting through a VPN router.
2. You are routing traffic through a proxy server.
3. You have previously visited the site and it has been stored in your cache.
4. You manually set the DNS servers on your computer, tablet, or smartphone.
28
ADDITIONAL CAPABILITIES
Intellistream QoS
Intellistream prioritizes video and gaming traffic for a better online entertainment experience.
There are two ways to enable Intellistream:
Run a Speed Test:
In order for Intellistream to provide you the best media experience, your Router needs to know what your approximate Internet speeds are.
Click “Run a Speed Test” and the test will begin.
Once complete you will see the results.
29
ADDITIONAL CAPABILITIES
If your Internet speed is greater than 70Mbps when downloading,
Intellistream QoS will only improve your uploading experience.
Refresh – This will retest your Internet speed.
When you click “Save,” your Router will save your changes.
30
ADDITIONAL CAPABILITIES
Manual set – This will let you set your approximate Internet speeds.
If you do not know your Internet speeds, contact your ISP.
When you click “Save,” your Router will save your changes.
Intellistream is now enabled.
31
ADDITIONAL CAPABILITIES
IPv6 Configuration
A new version of Internet Protocol (IP) uses a
128-bit address to implement additional features that are not present in current IP addresses.
Contact your ISP to inquire about their support for IPv6.
32
Pass-Through
Devices connected to your Router can talk to each other using native IPv6 packets, but information will be sent to all connected devices. Pass-through is not efficient and is not recommended for consistent use.
GettinG to Know Your router
Front Panel
A
B
A) router Status Light
Your Router’s status is shown by the light on the front.
off: The Router is not plugged into a power source.
Blinking Blue: The Router is starting up.
Solid Blue: The Router is connected to the Internet.
Solid Amber: The modem is detected but the router is not connected to the internet
Blinking Amber: The Router can’t detect the modem. Either the modem is off, is not plugged into the Router, or is unresponsive.
B) wi-Fi Protected Setup (wPS) Light and Button
The WPS button on the front of your Router can be used to help establish a secure connection between your Router and other WPS-enabled Wi-Fi devices such as computers. To use the WPS feature on your Router, see “Getting Started > Adding
Computers to Your Network > Using the WPS Button”.
The small light near the WPS button shows what is happening while you are using WPS to establish a connection.
off: Idle
Blinking Blue: The Router is listening for a WPSenabled computer or other device.
Solid Blue: The Router has made a secure connection with the computer or other device.
Amber: A connection was not created.
33
A
B
GettinG to Know Your router
Back Panel
A) Modem (wAn) Connector
Connect your modem to this port using an Ethernet cable.
B) wired (LAn) Connectors
Connect computers and other wired network devices to these ports using Ethernet cables.
C) uSB Port
USB printers, disks, and other
USB devices plugged into this port will be shared on your network. Each USB port has a light that indicates its status.
off: No USB device is connected or the attached
USB device is not in use.
Blinking: Please wait to unplug the device until the light turns off.
on: The USB device is connected and being shared on your network.
D) reset Button
This button is used to restart your Router in rare cases when it functions incorrectly. Resetting the Router will preserve your settings. This button may also be used to restore the factory default settings. Please see the Troubleshooting section for more information.
e) Power Connector
Connect the included power supply to this jack.
34
Technical DeTails
Technical Features
integrated 802.11n Wireless access Point
Utilizing Dual-Band Network technology, your Router creates two separate networks (one at 2.4GHz band and the other at 5GHz band), allowing increased bandwidth to all your connected wireless devices and computers.
naT iP address sharing
To save you the cost of adding IP addresses per computer in your house, your Belkin Router uses Network
Address Translation (NAT) technology, allowing you to share a single IP address across your network.
sPi Firewall
Your Router is equipped with a firewall that will protect your network from a wide array of common attacks and viruses.
Universal Plug-and-Play (UPnP) compatibility
The UPnP (Universal Plug-and-Play) feature in your Router offers seamless operation of voice and video messaging, games, and other applications that are UPnP-compliant.
Web-Based advanced User interface
You can easily make changes to your Router’s advanced settings through your web browser. These changes can be made from any computer on your network.
Belkin Router Monitor
The Belkin Router Monitor application helps you to monitor your Router’s status and change network settings.
integrated 4-Port 10/100 switch
Your Router has a built-in, 4-port network switch to allow your wired computers to share: printers, data,
MP3 files, digital photos, and much more.
UsB Port
The USB port lets you plug in printers, hard drives, and other USB devices to share across your network.
35
Technical DeTails
system Requirements
Router
Broadband Internet connection such as a cable or
DSL modem with RJ45 (Ethernet) connection
At least one computer with an installed network interface adapter
TCP/IP networking protocol installed on each computer
RJ45 Ethernet networking cable
Internet browser
setup software
A computer running Windows
Vista
®
XP SP3 or higher, Windows
®
, or Windows 7; or Mac OS
®
X v10.5 or v10.6 only
Minimum 1GHz processor and 512M BRAM
600MB of free hard-drive space for installation
UsB Print and storage Manager
Windows XP SP3 or higher or Windows Vista; or Mac OS X v10.5 or v10.6 only
Minimum 1GHz processor and 512MB RAM
50MB of free hard-drive space for installation
36
USING YOUR ROUTER
Enabling Auto Update on Your Belkin Router
The Router has the capability to automatically check for a newer version of firmware and alert you when it’s available. You can choose to download the new version or ignore it. Auto Update is disabled by default. If you want to enable it, select “Enable” and click “Save”.
Note: We recommend you use a computer that has a wired connection to the Router.
Setup steps:
1. Open a web browser on the computer.
2. In the address bar of the web browser, type “http://192.168.2.1”.
3. Click on “System Settings” in the Router
Links section on the dashboard.
37
USING YOUR ROUTER
4. Toward the lower-half side of the screen you will find “Auto Update Firmware Enabling.”
5. Select “Enable” by clicking the radio button and then click “Save” at the bottom of the screen.
38
USING YOUR ROUTER
Updating the Router’s Firmware via the Web Interface
The following steps show you how to update your Router’s firmware using its web interface. You do not need to be connected to the Internet as this interface is built into the Router itself.
Setup steps:
1. Locate and download the firmware file from the Belkin support site. (Type your part number into the search box in the top right corner and look for “Firmware” in the title.)
2. Save the file to a location on your computer where you can get to it easily, such as your desktop.
3. Connect the computer to one of the four LAN ports on the Router (refer to image).
4. Open a web browser on the computer.
5. In the address bar of the web browser, type “http://router” or
“http://192.168.2.1” and press “Enter” on your keyboard.
USING YOUR ROUTER
6. Click on “Firmware Update” toward the bottom. 7. Click the “Choose File” button toward the middle of the screen to search for the file you saved previously.
Note: The firmware version in the image above is depicted as an example. Your file name will vary depending on your model and version.
USING YOUR ROUTER
8. Select the firmware file by left-clicking on it and then click the “Open” button in the lower-right corner of the window.
This will take you back into the Router’s interface.
9. Click the “Update” button.
10. A prompt asking, “Are you sure you want to continue with upgrading?” will appear. Click “OK”.
11. A second prompt will open telling you the Router will not respond during the upgrade and warning you not to remove the power supply from the Router. Click “OK” once more.
Congratulations. The firmware has been updated successfully.
USING YOUR ROUTER
Resetting the Router
Reset Button – Red
The “Reset” button is used in rare cases when the Router may function improperly. Resetting the Router will restore the
Router’s normal operation while maintaining the programmed settings. You can also restore the factory default settings by using the “Reset” button. Use the restore option in instances where you may have forgotten your custom password.
Resetting the Router
Push and release the “Reset” button. The lights on the Router will momentarily flash. The “Router” light will begin to blink. When the “Router” light becomes solid again, the reset is complete.
Restoring Your Router to Factory Defaults
Press and hold the “Reset” button for at least 5 seconds, and then release it. The lights on the Router will momentarily flash. The “Router” light will begin to blink. When the “Router” light becomes solid again, the restore is complete.
42
USING YOUR ROUTER
Restoring the Router to Default
Settings Using the Web Interface
Symptoms
You need to restore the factory defaults using the web interface.
This may be because the Router is not performing as expected or you wish to remove all previously configured settings.
Setup steps
1. Open a web browser on the computer.
2. In the address bar of the web browser, type
“http://router” or “http://192.168.2.1”.
3. Click on “Restore Factory Defaults” in the left-hand column under the “Utilities” heading.
43
USING YOUR ROUTER
4. Click on the “Restore Defaults” button.
44
5. A warning box will open that says, “Warning: All your settings will be lost. Are you sure you want to do this?” Click “OK”.
6. The Router will begin the restoring process. Once the restore is complete, the Router will reboot.
Note: This may take several minutes.
Your Router has successfully been restored to its factory settings.
i can’t connect to the internet wirelessly.
If the light on the front of the Router is solid blue, then your
Router is connected to the Internet. You may not be connected to the Router’s wireless network. Please refer to “Adding
Computers to Your Network” in this manual for instructions.
If your Windows XP computer is running SP2, you will not be able to set up the Router via the wireless setup process. You will need to either update to Windows XP
SP3 or complete the setup via a wired connection.
45
TroubleshooTing, supporT, and WarranTy i can’t connect to the internet wirelessly and my network name is not listed in available networks.
1. Verify that your Router is on and the front-panel light shows solid blue.
2. If you are far from the Router, you might try moving closer to see if you might have been out of range.
3. Using a computer attached to the Router via a network cable, visit http://router/ and ensure that “Broadcast SSID” is ON.
This setting is found on the “Channel and SSID” page.
My wireless network performance is slow, inconsistent, suffers from weak signal, or i’m having difficulty maintaining a
Vpn connection.
Wireless technology is radio-based, which means connectivity and the throughput performance between devices decreases when the distance between devices increases.
Other factors that will cause signal degradation (metal is generally the worst culprit) are obstructions such as walls and metal appliances. Note also that connection speed may decrease as you move farther away from the Router.
In order to determine if wireless issues are related to range, we suggest temporarily moving the computer within 10 feet from the Router if possible.
Changing the wireless channel—Depending on local wireless traffic and interference, switching the wireless channel of your network can improve performance and reliability. See the section titled “Changing the Wireless
Channel” for instructions on how to choose other channels.
46
TroubleshooTing, supporT, and WarranTy
limiting the wireless transmit rate—Limiting the wireless transmit rate can help improve range and connection stability. Most wireless cards have the ability to limit the transmission rate. To change this property in Windows, go to the Windows Control Panel, open “Network
Connections”, and double-click on your wireless card’s connection. In the properties dialog, select the “Configure” button on the “General” tab, then choose the “Advanced” tab and select the rate property.
Wireless client cards are usually set to automatically adjust the wireless transmit rate for you, but doing so can cause periodic disconnects when the wireless signal is too weak; as a rule, slower transmission rates are more stable. Experiment with different connection rates until you find the best one for your environment. Note that all available transmission rates should be acceptable for browsing the Internet. For more assistance, see your wireless card’s user manual.
i’ve installed this new router and some of my network clients
(computers, game consoles, etc.) are now unable to connect.
Your new Router came pre-configured with a network name and password, found printed on an attached card. All clients must use this network name and password to connect wirelessly to your Router.
You will need to find the network settings on your client, select the network name printed on the card from the list of available networks, and enter the password when prompted to join the wireless network.
47
TroubleshooTing, supporT, and WarranTy does the router support Wireless protected access (Wpa) security?
The Router ships with WPA/WPA2 security turned on.
Windows XP and some older network hardware may require a software update to support WPA/WPA2.
i am having difficulty setting up Wpa security on my router.
1. Log in to your Router by visiting http://router/ with your web browser.
Click on the “Login” button in the top right-hand corner of the screen. You will be asked to enter your password. If you have never set a password, leave the “Password” field blank and click “Submit”.
2. Click “Wireless” in the left-hand menu. Then click “Security” just below that.
3. Select the “WPA/WPA2” option.
4. Enter a password. This can be from 8–63 characters of your choice, including spaces and punctuation, OR a 64-digit hexadecimal number (using only the numbers 0–9 and letters A–F).
5. Click “Apply Changes” to finish. Your wireless connection is now encrypted. Each computer using your wireless network will need to use the new key.
note: If you are configuring the Router over a wireless connection, you will have to re-connect to the
Router after changing any security settings.
note: Some older networking hardware supports only WEP encryption. If your older computers cannot connect to your network, try 128-bit or 64-bit WEP, or seek software updates from their manufacturers.
48
TroubleshooTing, supporT, and WarranTy i am having difficulty setting up Wired equivalent privacy (Wep) security on my router.
1. Log in to your Router. Visit http://router/ with your web browser.
Click on the “Login” button in the top right-hand corner of the screen. You will be asked to enter your password. If you have never set a password, leave the “Password” field blank and click “Submit”.
2. Click “Wireless” in the left-hand menu. Then click “Security” just below that.
3. Select the “128-bit WEP” option.
4. You may type in a WEP key manually, or generate one from a passphrase. Type a phrase in the “Passphrase” field and click the “Generate” button. A WEP key is composed of 26 hexadecimal digits (0–9, A–F.. For example, C3 03 0F AF
4B B2 C3 D4 4B C3 D4 EE 74 is a valid 128-bit WEP key.
5. Click “Apply Changes” to finish. Your wireless activity is now encrypted. Each computer using your wireless network will need to use the new key.
note: If you are configuring the Router over a wireless connection, you will have to re-connect to the
Router after changing any security settings.
note: Some older networking hardware supports only 64-bit WEP encryption. If your older computers cannot connect to your network, try 64-bit WEP.
49
TroubleshooTing, supporT, and WarranTy a disk i plugged into the usb port is not showing up on my computer or in Memory safe.
1. Is the light on over the USB port that the disk is plugged into?
If not, try unplugging and re-plugging the disk. Please check that the USB connector is firmly plugged into the Router.
2. If your disk has an optional power supply, please use it while the disk is attached to your Router.
3. The Router supports FAT16, FAT32-, or NTFS-formatted disks. Disks in other formats will not appear in the
Finder (Mac OS X) or Windows Internet Explorer.
a disk i plugged into the usb port is not coming on or remains on only for a short time.
Some drives require more power than the router’s USB port provides. If your disk has an optional power supply, please use it while the disk is attached to your Router.
a printer i plugged into the usb port is not showing up on my computer.
1. Is the light on over the USB port that the printer is plugged into?
If not, try unplugging and re-plugging the printer. Please check that the USB connector is firmly plugged into the Router.
2. To print to a printer attached to the Router, your computer must have that printer’s driver installed.
Please check that the driver is installed.
3. The printer may not be set to auto-connect. Via the Belkin Router
Manager, open the USB Print and Storage Center. Check that the printer appears in the list of available devices. View the properties of the printer, and check that “auto-connect” is selected.
50
TroubleshooTing, supporT, and WarranTy a different sort of usb device that i plugged into the usb port is not showing up on my computer.
Most USB devices other than disks and printers must be accessed via the USB Print and Storage Center.
1. Is the light on over the USB port that the device is plugged into?
If not, try unplugging and re-plugging the device. Please check that the USB connector is firmly plugged into the Router.
2. Via the Belkin Router Manager, open the USB
Print and Storage Center. Check that the device appears in the list of available devices.
3. Select the device and click the “Use” button. The device will be virtually connected to your computer until you choose to “Stop
Using” the device, or another person requests use of the device.
51
TroubleshooTing, supporT, and WarranTy
Technical support us
http://www.belkin.com/support
uK
http://www.belkin.com/uk/support
australia
http://www.belkin.com/au/support
new Zealand
http://www.belkin.com/au/support
singapore
1800 622 1130
europe
http://www.belkin.com/uk/support
You can find technical-support information on our website, www.belkin.com
, by navigating to the tech-support section.
If you want to contact technical support by phone, please call the number you need from this list*:
*Local rates apply.
Country
AUSTRIA
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
GERMANY
GREECE
HUNGARY
ICELAND
IRELAND
ITALY
LUXEMBOURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
RUSSIA
SLOVAKIA
SLOVENIA
SOUTH AFRICA
SPAIN
SWEDEN
SWITZERLAND
UNITED KINGDOM
number
0820 200766
07 07 00 073
239 000 406
701 22 403
0972519123
08 - 25 54 00 26
0180 - 500 57 09
00800 - 44 14 23 90
06 - 17 77 49 06
800 8534
0818 55 50 06
02 - 69 43 02 51
34 20 80 85 60
0900 - 040 07 90 €0.10 per minute
81 50 0287
00800 - 441 17 37
707 200 676
495 580 9541
08000 04614
0800 80510
0800 - 99 15 21
902 - 02 43 66
07 - 71 40 04 53
08 - 48 00 02 19
0845 - 607 77 87
OTHER COUNTRIES
52
+44 - 1933 35 20 00
Internet adress
www.belkin.com/de/networking/ www.belkin.com/nl/networking/ www.belkin.com/fr/networking/ www.belkin.com/uk/networking/ www.belkin.com/uk/networking/ www.belkin.com/uk/networking/ www.belkin.com/fr/networking/ www.belkin.com/de/networking/ www.belkin.com/uk/networking/ www.belkin.com/uk/networking/ www.belkin.com/uk/networking/ www.belkin.com/uk/networking/ www.belkin.com/it/networking/ www.belkin.com/uk/networking/ www.belkin.com/nl/networking/ www.belkin.com/uk/networking/ www.belkin.com/uk/networking/ www.belkin.com/uk/networking/ www.belkin.com/networking/ www.belkin.com/networking/ www.belkin.com/networking/ www.belkin.com/uk/networking/ www.belkin.com/es/networking/ www.belkin.com/uk/networking/ www.belkin.com/de/networking/ www.belkin.com/fr/networking/ www.belkin.com/uk/networking/
TroubleshooTing, supporT, and WarranTy
belkin international, inc., limited
2-year product Warranty
What this warranty covers.
Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Belkin warrants the Belkin product for two years.
What will we do to correct problems?
Product Warranty.
Belkin will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).
Belkin reserves the right to discontinue any of its products without notice, and disclaims any limited warranty to repair or replace any such discontinued products. In the event that Belkin is unable to repair or replace the product (for example, because it has been discontinued), Belkin will offer either a refund or a credit toward the purchase of another product from Belkin.com in an amount equal to the purchase price of the product as evidenced on the original purchase receipt as discounted by its natural use.
What is not covered by this warranty?
All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with. The Belkin Product Warranty does not protect against acts of God such as flood, lightning, earthquake, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized program, or system equipment modification or alteration.
53
TroubleshooTing, supporT, and WarranTy how to get service.
To get service for your Belkin product you must take the following steps:
1. Contact Belkin Tech Support at the number listed on page 52, within 15 days of the Occurrence. Be prepared to provide the following information: a. The part number of the Belkin product.
b. Where you purchased the product.
c. When you purchased the product.
d. Copy of original receipt.
2. Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to proceed with your claim.
Belkin reserves the right to review the damaged Belkin product.
All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment. The cost, if any, of shipping the equipment to and from such repair facility and of such estimate shall be borne solely by the purchaser. Damaged equipment must remain available for inspection until the claim is finalized. Whenever claims are settled, Belkin reserves the right to be subrogated under any existing insurance policies the purchaser may have.
54
TroubleshooTing, supporT, and WarranTy how state law relates to the warranty.
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF
BELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSED
OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING
THE IMPLIED WARRANTY OR CONDITION OF QUALITY,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE
LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL,
SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR
MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO,
LOST BUSINESS OR PROFITS ARISING OUT OF THE
SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state. Some states do not allow the exclusion or limitation of incidental, consequential, or other damages, so the above limitations may not apply to you.
55
REgulatoRy aNd SaFEty INFoRmatIoN
Declaration of Conformity with electromagnetic compatibility and electromagnetic interference
We, Belkin International, Inc., of Schiphol-Rijk, Netherlands, declare under our sole responsibility that the device, F9K1102, complies with Directives stated in our EU declaration which can be obtained from our website given below.
Caution: Exposure to Radio Frequency Radiation.
This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body
CISPR 22 Interference Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to the requirements of EN 55022 and EN 55024. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
56
REgulatoRy aNd SaFEty INFoRmatIoN
Europe – EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC, the EMC Directive 2004/108/EC, and the low-voltage
Directive 2006/95/EC. A copy of the European Union CE marking “Declaration of Conformity” may be obtained at the website: www.belkin.com/doc
For information on product disposal please refer to http://environmental.belkin.com
General Safety Information:
• For indoor installation only
• For installation with supplied power adapter only
• The supplied power adapter is the product’s switch-off device. The base socket must be near the product and easily accessible.
57
© 2012 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. iPad, iPhone, iPod touch, Mac, Mac OS, and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. Windows, Windows Vista, Internet Explorer, and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Belkin Ltd.
Express Business Park
Shipton Way, Rushden
NN10 6GL, United Kingdom
Belkin Ltd.
Express Business Park
Shipton Way, Rushden
NN10 6GL, United Kingdom
Belkin GmbH
Otto-Hahn-Straße 20
85609 Aschheim
Germany
Belkin Iberia
Avda de Barajas, 24, Edificio Gamma,
4ªpta, 28108 Alcobendas
Madrid - Spain
Belkin Italy & Greece
Via Nino Bonnet, 4/6
Milan 20154
Italy
Belkin B.V.
Tupolevlaan 1
1119 NW Schiphol-Rijk,
Netherlands
Lataa
Julkinen linkki päivitetty
Chattisi julkinen linkki on päivitetty. You may view and manage your chat links after registration here.
Dokumentin julkinen linkki
Mainos