Foscam C1 Lite User manual

User

Manual

Indoor HD IP Camera

Model: C1

V1.2

Table of Contents

1 Overview.................................................................................................................................................................. 2

1.1 Key Features................................................................................................................................................2

1.2 Read Before Use.........................................................................................................................................3

1.3 Package Contents.......................................................................................................................................3

1.4 Physical Description................................................................................................................................... 3

2 Access the IP Camera........................................................................................................................................... 4

2.1 Wired Connection........................................................................................................................................4

2.2 Wireless Connection...................................................................................................................................6

2.3 Access the Camera in WAN....................................................................................................................12

2.4 Using the VLC player............................................................................................................................... 16

2.5 IP camera connection to the server....................................................................................................... 18

3 Surveillance Software GUI..................................................................................................................................18

3.1 login Window..............................................................................................................................................19

3.2 Setup Wizard............................................................................................................................................. 20

3.3 Surveillance Window................................................................................................................................ 22

4 Advanced Camera Settings................................................................................................................................ 27

4.1 Setup Wizard............................................................................................................................................. 27

4.2 Status.......................................................................................................................................................... 27

4.3 Basic Settings............................................................................................................................................ 30

4.4 Network.......................................................................................................................................................39

4.5 Video........................................................................................................................................................... 50

4.6 Alarm........................................................................................................................................................... 53

4.7 Record.........................................................................................................................................................57

4.8 Firewall........................................................................................................................................................61

4.9 System........................................................................................................................................................ 61

5 Playback.................................................................................................................................................................65

6 Appendix................................................................................................................................................................ 67

6.1 Frequently Asked Questions................................................................................................................... 67

6.2 Default Parameters...................................................................................................................................74

6.3 Specifications.............................................................................................................................................75

6.4 CE & FCC...................................................................................................................................................76

6.5 Warranty..................................................................................................................................................... 77

7 Obtaining Technical Support...............................................................................................................................80

1

1 Overview

FOSCAM Indoor HD IP Camera is an integrated wireless IP Camera with a color CMOS sensor which enable to view in High Definition resolution. It combines a high quality digital video camera, with a powerful web server, to bring clear video to your desktop and mobile devices no matter where by your local network or over the Internet.

These cameras support P2P function. Thanks to the P2P easy access technology, you don’t need to do complicated Port Forwarding and DDNS settings, you just need to scan the QR code on the bottom of the camera to connect it to smart phone, or input the UID on CMS software to realize remote access.

With flexible move of 360-degree horizontally and 180-degree vertically, FOSCAM IP Camera provides users with more comprehensive controls over a monitored site. The camera supports H.264 video compression technology, dramatically reduces file size and saves network bandwidth.

The camera is based on the TCP/IP standard. A built-in WEB server inside which could support Internet

Explorer simplifies the management and maintenance of your device is simplified by accessing the website of your camera through network.

The camera is designed for indoor surveillance with wide applications such as at home, in retail store and in office. Controlling the camera and managing images are simplified by using the provided web interface across the network in either wired or wireless way.

FOSCAM provides Smart Phone APP for Android and iPhone users, please search and install Foscam

App named Foscam on App Store and Google Play for iOS and Android devices, then you can view your camera anywhere, anytime on your smart mobile devices.

1.1 Key Features

 Standard H.264 video compression algorithm to satisfy the transmission of high definition video in narrow bandwidth network

 P2P feature for easy access

 Megapixel HD video

 Support IE/Firefox/Google/Safari browser

 Support WEP,WPA-PSK and WPA2-PSK Encryption

 Wireless connection is compliant with IEEE 802.11b/g/n WI-FI, up to 150Mbps

 IR night vision (Range: 8m)

 Support image snapshot

 Support dual-stream

 Support SD Card storage up to 32GB

 Support IR-Cut auto switch

 Embedded free FOSCAM DDNS(dynamic domain name service) Service

 Supporting the Third Party Domain Name Service

 Support two-way audio

 Support ONVIF protocols

Shenzhen Foscam Intelligent Technology Co., Limited

Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

2

 Multi-level users management with password protection

 Motion detection alert via email or upload image to FTP

 Provide free Android and iPhone APP for viewing live video provide free Central Management

Software to manage and monitor multiple cameras

 Support record schedule

1.2 Read Before Use

Please first verify that all contents received are complete according to the Package Contents listed below.

Before the IP Camera is installed, please carefully read and follow the instructions in the Quick

Installation Guide to avoid damage due to faulty assembly and installation. It also ensures the product is used properly as intended.

1.3 Package Contents

● IP Camera × 1

● Quick Installation Guide × 1

● CD×1

● AC Adapter × 1

● Power Line × 1

● Warranty Card × 1

1.4 Physical Description

Front panel Rear panel

Front panel:



PIR:The PIR ( Passive Infrared ) is electronic devices which are used in some security alarm systems to detect motion of an infrared emitting source, usually a human body.

 LENS: Fixed focus lens.

 Infrared LED: Infrared LEDs for night vision.

 Microphone: Built-in microphone.



Micro SD Card slot: Supports up to 32GB SD card for storing the video.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

3

Rear panel:

 Power Light: If the power supply works fine, the light will be on.

 LAN: 10/100 Mbps RJ-45 port for wired connection

 SoftAP: Press the SoftAP button for more than 2 seconds. The Network light indicator begins to twinkle every 0.1 seconds.

 WPS/Reset

 WPS: Push both WPS/Reset button on the camera and wireless router within 1 minute, the camera will connect to the wireless router automatically, in WPS process, the Network light will blink every 0.4 seconds;

 Reset: Push and hold the WPS/Reset button for more than 10 seconds to set the camera to factory default, the Power light will blink every 0.4 seconds;

 Power: DC 5V/1A Power supply.

The flashing status of the Power light and Network light are shown in the following table.

Light Flashing Status

Power light off on

Flashing every 0.4 seconds

Network light off

Constant Flash

Slow Flash every 1.0 second




Description

The power don't work properly.

The power supply works fine.

Reset to take effect

No Wireless connection

Wired connection

Wi-Fi connected

WPS is connecting

EZLink takes effect

SoftAP is started

2 Access the IP Camera

2.1 Wired Connection

1. Connect the camera to the LAN network (Router or Switch) via network cable.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

4

2. Connect the power adapter to the camera.

3. Insert the CD into the CD drive of your computer.

4.

Go to the folder “IP Camera Search Tool” and find the folder “For Windows OS”or “For Mac OS”.

Copy and paste the IP camera tool file to your computer, or drag it onto your Desktop.

Shortcut icon for Windows OS Shortcut icon for Mac OS

Notes:

 If your computer ( Windows OS ) supports autorun function, you can find the corresponding file in the opened control panel.

 If your computer doesn’t have CD drive, you can download the IP camera tool from our website for free.

The camera supports HTTP and HTTPS protocols, you can access the camera in two ways.

(1) http:// LAN IP + HTTP Port NO.

The default HTTP port NO. is 88. Double click the IP Camera Tool icon to run, and it should find the camera’s IP address automatically after you plug in the network cable.

Double click the IP address of the camera; the camera login page should be open in your default browser.

(2) https:// LAN IP + HTTPS Port NO.

The default HTTPS port NO. is 443. You can use the URL to access the camera: https:// LAN IP +

HTTPS port NO.

Go to Settings - Network - Port panel, you can see and change the HTTP and HTTPS port NO.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

5

NOTE：

When logging in for the first time, you will need to download and install the add-on.

2.2 Wireless Connection

There are some ways of wireless connection: EZLink connection, soft AP connection and WPS connection.

 EZLink connection: Use the mobile phones or other mobile devices to download APP, then connect the camera and the wireless router by the APP. The procedure of the EZLink connection, please refer to the Quick Installation Guide.

 Soft AP connection: Use the mobile device which can search for the wireless network, Then use the web browser to visit http://192.168.1.1:88 by the mobile device. Follow the Setup Wizard to finish the settings.

 WPS connection: WI-FI Protected Set-up, Press and hold the WPS button on your wireless router and your camera within 60 seconds. So that your camera and wireless router connect successfully.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

6

2.2.1 Soft AP Connection

To ensure that the ethernet cable and the camera is disconnected before you begin.

1. Start camera: power on, the indicator light of camera will light on.

2. Press the Soft AP button for 3-5 seconds. The Network light begins to twinkle at very high frequency(every 0.1 seconds).

3. Use a terminal which could search the WLAN (desktop, laptop, mobile phone, or pad. This part takes laptop as an example.) to search for the AP named "C1_******" for connection.(****** indicate the last six letters of camera’s MAC ID. )

Soft AP Button

IP Camera The WLAN page in the terminal device

4. After finishing Soft AP connection, use the web browser of the terminal to visit http://192.168.1.1:88.

5. Log in the camera ( Default username is admin with no password ). When log in for the first time, you need to change the username and password.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

7

Input the New username,

New password and

Confirm the password.

6. After logging in for the first time, it will go to "Setup Wizard” automatically. Please set the basic parameters of the camera, such as camera name, camera time, wireless settings (The camera connect to your wireless router: Wireless Network List - enter the password of your wireless router ), IP configuration.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

8


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

9

Notes:

 We recommend you to choose to manually set the IP when you know some knowledge of the network.

 It needs about 1 minute to connect the camera to your router.

7. After completing the setup wizard, you should press the Soft AP button for 3-5 seconds to cancel the

Soft AP connection mode, this is located on the back of your camera. The Network light begins to slowly flash(once per second), it indicates that the wireless connection is successful.

8. Please make sure that the wireless device connect your laptop to the router which your camera has


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

10

connected to.

9. Open the CD named “FOSCAM”, go to the folder “IP Camera Search Tool” and find the folder “For

Windows OS” or “For Mac OS”. Copy and paste the IP camera tool file to your wireless device, or drag it onto your desktop.

Notes:

 You could also download the IP camera tool from our website www.foscam.com for free.

 If you have multiple cameras and you cannot determine which camera you are going to log in.

Please match the "Device MAC address" on the search tool with the MAC address on the label pasted of each camera.

10. Double-click the camera list here, and your default browser will open up to the login page. Input the username and password you has changed. Then, you will see the live video of your baby on the interface.

Main stream offers the highest quality video while

Sub stream offers less quality, but also less delay when viewing.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

11

Now, you could use your camera in LAN.

Note:

64-bit browser is not supported.

2.2.2 WPS

(WI-FI Protected Set-up)

Before using WPS wireless connection, you need to:

 Make sure that your wireless router has the WPS function, and has been properly connected to the

Internet.

 WPS button on the wireless router is typically located on the front panel or rear panel.TP-LINK router's WPS button is called QSS (Quick Security Setup).

 Make sure that the ethernet cable and the camera is disconnected.

WPS Button

(1) Press and hold the WPS button for three seconds. The Network light of the camera begins to twinkle at high frequency. (every 0.4 seconds)

(2) Press and hold the WPS button for three seconds on your wireless router within 60 seconds. Then the camera will automatically create a secure wireless connection to your router in about 60 seconds.

(3) The IP Camera Tool will search the camera’s LAN IP. Make sure the PC and the camera share the same subnet.

NOTE :

The security mode of router cannot be WEP, or else the WPS settings may be failed.

2.3 Access the Camera in WAN

2.3.1 Static IP Addresses

Users with static IP addresses do not need to set DDNS service settings for remote access. After you have finished connecting the camera using the LAN IP address and port forwarding, you can access the camera directly from Internet using the WAN IP address and port number.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

12

How to Obtain the WAN IP address from a public website ？

To obtain your WAN IP address, enter the following URL in your browser: http://www.whatismyip.com

.

Your current WAN IP will be shown on the webpage.

2.3.2 Remote Access

If you want to access your camera by web browser outside of your LAN, you need to configure following configurations.

1. Choose “Settings” on the top of the camera web page, then go to the “Network > IP Configuration” section on the left side of the screen, then uncheck the Obtain IP DHCP.

IP Address: Set this in the same subnet as your computer , or keep it as default.

Subnet Mask: Keep it as default.

Gateway and DNS Server: Set it to the

IP address of your router.

2. Enable UPnP and DDNS in the camera’s settings page. We recommend you to use the DDNS by factory default.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

13

Select Yes and click Save.

Click Enable DDNS and click Save.

The content in the Manufacture’s DDNS column is the domain name of your camera.

3. You can see the port of your camera here. If you want to set Remote Access for several cameras on the same network, you will need to change the HTTPS port for each camera.

4. If the UPnP of the router has been enable, you do not need to perform following steps. Otherwise, you need to select one of the following methods to configure port forwarding on your router. For these steps, we will be using the TP-LINK brand wireless router as an example.



If there is a UPnP function in your router：

Choose “Forwarding > UPnP”, make sure that the Current UPnP Status is Enabled.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

14

 If there is no UPnP function in your router：

You need to manually add port(HTTPS port) forwarding, refer to the following steps. You need go to the

“Forwarding > Virtual Servers” panel for setup.

Click Add New.

Input the port and IP address of your camera and click Save.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

Here you have finished the

Port Forwarding setup.

15

5. Now you can access your IP camera by https://domain name: HTTPS port via the Internet.

2.4 Using the VLC player

The camera supports RTSP streaming, here you can view the camera by VLC player.

RTSP URL rtsp:// [user name][:password]@IP:Port number/videostream

The part in the square brackets can be omitted.

user name & password:

The user name and password to access the camera. This part can be omitted.

IP: WAN or LAN IP address.

Port NO. : If there is the RTSP port number on the Port page, you must only use RTSP port number.

otherwise, you must only use http port number.

Video stream: Three modes are supported: video Main, video Sub and audio. Video Sub is a better choice in bad network condition. If you select audio, you can only hear sound without seeing picture.

For example:

IP: 192.168.1.11

RTSP Port number: 554

User name: admin

Password: 123

Enter either one of the following four URLs in the VLC

1．rtsp://admin:[email protected]:554/videoMain

2．rtsp:// @192.168.1.11:554/videoMain

3．rtsp://:[email protected]:554/videoMain

4．rtsp://[email protected]:554/videoMain

Open the VLC, and go to “Media”--”Open Network Stream” option, then enter the URL in VLC.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

16

Sometimes you may need to enter the user name and password for another time. Click OK and you can see the real-time preview.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

17

If you cannot play the video in the VLC player, please check the port mapping. You can read Quick

Installation Guide about how to configure port forwarding.

NOTE:

If you modify the camera’s username or password, you had better reboot the camera to apply the new username and password in authentication in the VLC.

2.5 IP camera connection to the server

Device supports ONVIF 2.2.1 protocol, You can easily access NVR with ONVIF or server with ONVIF.

3 Surveillance Software GUI

Please refer to the section 2.1 if you install the camera for the first time. You can start to learn about software operation in the computer


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

18

3.1 login Window

Section1 Enter the Username and password

The default administrator username is “admin” with no password, please change the password the first time you use and prevent unauthorized users login the camera.

Section2 Stream

The camera supports two stream modes: Main stream and sub stream. Select Main stream if you want to access the camera from LAN and sub stream will be better if you want to access the camera from

Internet.

Note:

Select sub stream to ensure a more fluent video under narrow network bandwidth.

Section3 Select the language

You click on the language dropdown list to select language.

Section4 login the camera

Click “login” button.

NOTE：

When setting up your camera for the first time, it will request that you modify the default username and/or password if both are still set to default. Input the new username and password, click "Modify" to complete the modification. You will now use the new username and password to login to the camera in the future.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

19

3.2 Setup Wizard

You will go to “Setup Wizard”automatically after your first-login, where you can set the basic parameters of camera, such as camera name, camera time, wireless settings, IP configuration.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

20


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

21

Recommend to select

"Obtain IP Form DHCP”.

3

4

5

1

2

3.3 Surveillance Window

6

7

Section 1 FOSCAM Logo/ Live Video / Settings/Playback buttons

: FOSCAM LOGO

: Path to surveillance window. Click this button to go back to the surveillance window


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

22

: Path to Administrator Control Panel, Click it, to go to Administrator Control Panel and do advanced settings.

: Click this button to go back to the Playback panel to view the stored audio files stored in the SD Card.

Section 2 Multi-Device Window

The firmware inside the camera supports up to 9 cameras being monitored at the same time. You can add other cameras in multi-device setting.

Section 3 Mode/ Stream / Mirror/ Flip buttons

Mode

1) 50HZ ---------Indoor surveillance (Region: Europe, China)

2) 60HZ ---------Indoor surveillance (Region: USA, Canada)

3) Outdoor------Outdoor surveillance

Stream

The default stream supports multiple modes, For example: HD Mode/720P/23fps/2M meanings: Stream type / Resolution / Maximum frame rate/ Bit rate. (Different models support different specific mode. )

1) Stream type : It is used to identify the stream type.

2) 720P/ VGA

There are two resolutions, the bigger one is 720P, and the smaller one (VGA) is 640x480 pixels. The bigger the resolution, the better of the image quality is. If you are accessing the camera via internet and want to get more fluent video streaming, please select resolution VGA.

3) Maximum frame rate

You should lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15, you can achieve fluently video. The maximum frame rate for each model is different, please see the

“Specifications”.

4) Bit rate

Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration should combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate is large, that will lead to video can not play well.

You can reset the stream type on Settings-> Video-> Video Settings panel.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

23

After changing, please reboot the camera and you can see the modification.

Section 4 IR LED Lights

Click Infra led and there are three modes to adjust the infrared led: Auto, Manual and Schedule.

Auto: Select it and the camera will adjust the infra led (on or off) automatically.

Manual: Select it and you can turn on or turn off the infra led manually.

Schedule: Select it and the IR led light will be off at the schedule period. If you want to define or change the IR led lights schedule time, please go to Settings--->Video---> IR LED Schedule page.

Section 5 Image quality settings

In this page, you can tune Hue, Brightness, Contrast, Saturation, and Sharpness to get higher quality.

Section 6 OSD

If you have added time and camera name in the video, you can see it in the live window.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

24

Go to Settings ---Basic settings---Camera name panel, and you can change another device name.

The default device name is anonymous.

Go to Settings ---Basic settings---Camera time panel and adjust the device time.

Go to Settings ---Video---On Screen Display panel, you can add or no add OSD.

Section 7 Play/Stop/ Talk/Audio/ Snap/ Record/ Full screen button

1----- Play Click it to play the video of the camera

2----- Stop Click it to stop the video of the camera

3----- Talk

Click the button and the icon will become to , then talk to the microphone that connected with PC, people around the camera can here your voice. Click the icon again and stop talking.

4----- Audio Click this icon, the icon will become to by the earphone or speakers that connected with PC.

you can hear the sound around the camera

5----- Snapshot

Click it to make snapshot and it pop-up a window which picture you snapshot, right click in the window and save the picture to anywhere you want.

6----- Record Click the icon and the camera start recording, you can see a green dot in the live window. Click again and stop recording. The default storage path is C:\IPCamRecord. You can change the storage path: Go to Settings- >Record->Storage Location panel.

7----- Full Screen Click it to make full-screen, or you can double click the surveillance screen to make full-screen. Double click again and exit full-screen.

Onscreen Mouse Control

Right click the mouse and you can adjust the screen ration, full screen and Zoom up.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

25

Keep ration: Select it and the camera will adjust the size of live window based on the the computer monitor automatically. Sometimes there is a black border around the video, please select Keep ration to get a better visual quality .

Full Screen: Select it and Click it to make full-screen, press ESC and exit full-screen.

Zoom up: Select it and you can see a bigger screen than before.

First Method: Here is a convenient and fast solution to Zoom up/down screen by Clicking Video Screen and adjusting Mouse pulley, or by press the CTRL key and click the mouse left button.

Second Method: Click it and the live view will be digital zoomed up, then click Zoom Down and the live view back to original size.

When you select the Full Screen, then click right mouse, there is a Screen PTZ button.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

26

Click the Screen PTZ button and put the mouse on the screen to indicate the camera move direction you prefer, press the left mouse, the camera will move to the corresponding direction. Loosen the mouse and stop moving. Press Esc button or double click right mouse and cancel the function.

NOTE: For Mac OS, the plugin cannot support Onscreen Mouse Control, so you cannot allow to use it.

4 Advanced Camera Settings

Click the button “Settings”, goes to Administrator Control Panel to make advanced camera settings.

4.1 Setup Wizard

Please go to section 3.2 to find the way to set it.

4.2 Status

Status contains four columns: Device Information, Device Status, Session Status and Log, it will show you various information about your camera.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

27

4.2.1 Device Information

Camera Model: The camera model NO.

Camera Name: The Device Name is a unique name that you can give to your device to help you identify it. Click Basic Settings and go to Camera name panel where you can change your camera name. The default device name is anonymous.

Camera ID: Display the wired MAC address of your camera. For example Device ID is 000C5D00008, the same MAC ID sticker is found at the bottom of the camera.

Camera Time: The system time of the device. Click Basic Settings and go to Camera time panel and adjust the time.

System Firmware Version: Display the System Firmware version of your camera.

Application Firmware Version: Display the application firmware version of your camera.

Plug-In Version: Display the plug-in version of your camera.

4.2.2 Device Status

On this page you can see device status such as Alarm status/ Record Status ,DDNS status ,WIFI status and so on.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

28

4.2.3 Session Status

Session status will display who and which IP is visiting the camera now.

4.2.4 Log

The log record shows who and which IP address accessed or logout the camera.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

29

Reboot the camera and clear the log records.

4.3 Basic Settings

This section allows you to configure your camera’s Name, Time, Mail, User account and Multi-Device.

4.3.1 Camera Name

You can define a name for your camera here such as apple. Click Save to save your changes. The alias name cannot contain special characters.

4.3.2 Camera Time

This section allows you to configure the settings of the internal system clocks for your camera.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

30

Time Zone: Select the time zone for your region from the dropdown menu.

Sync with NTP server: Network Time Protocol will synchronize your camera with an Internet time server.

Choose the one that is closest to your camera.

Sync with PC: Select this option to synchronize the date and time of the Network Camera with your computer.

Manually: The administrator can enter the date and time manually. Note select the date and time format.

use DST: Select the daylight saving time from the dropdown list.

Click Save button and submit your settings.

NOTE: If the power supply of camera is disconnect, you need set the camera’s time again.

4.3.3 User Accounts

Here you can create users and set privilege, visitor, operator or administrator. The default user account is admin, with a blank password. You can enter the users accounts of visitor, operator and administrator Manually.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

31

How to change the password?

Firstly, select the account which you want to change the password, then select “Change password”, enter the old password and the new password, lastly click modify to take effect.

How to add account ?

Select one blank column, then enter the new user name, password and privilege, last click Add to take effect. You can see the new added account on the Account list.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

32

Delete ：Select the account which you want to delete, then click Delete button to take effect.

NOTE: The default admin account cannot be deleted, but you can add other administrator users.

How to change the username ?

Firstly, select the account which you want to change the username, then select “Change username”, enter the new password, lastly click modify to take effect.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

33

4.3.4 Multi-Camera

If you want to view multi-surveillance screens on one window, you need to login one camera, and set it as the main device, and do Multi-Device Settings, add other cameras to the first one camera. Before you do multi-cams settings, you need to assign different port such as 81, 82, 83, 84, 85, 86, 87, 88 to the cameras if there is 8 cams installed.

The firmware within the camera can support a maximum of 9 devices monitoring all at the same time.

This page you can both add FOSCAM MJPEG and H.264 series cameras to the first camera and view multi-surveillance screen on one window.

Add cameras in LAN

In Multi-Device Settings page, you can see all devices searched in LAN. The 1st Device is the default one. You can add more cameras in the list in LAN for monitoring. The camera’s software supports up to 9

IP Cameras online simultaneously. Click The 2nd Device and click the item in the Device List in LAN, the

Alias, Host and Http Port will be filled in the boxes below automatically. Enter the correct username and password then click Add. Add more cameras in the same way.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

34

1 Click it, camera model, alias, host and HTTP Port will be filled in the following boxes automatically.

2 Enter the User name and password of the 2nd camera.

3 Click Add to take effect.

Camera Model: Our Company produces two series cameras: MJPEG and H.264. Here will show you which series the camera belongs to.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

35

Back to Surveillance Windows, and click Four Windows option, you will see four cameras you added.

Add cameras in WAN

If you want to view all cameras via the internet(remote computer), you will need to add them using DDNS domain name. Firstly, make sure all of the cameras you added can be accessed through the internet.

(The way to configure DDNS is in chapter 4.4.4)

Login to the first camera using a DDNS domain name and port.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

36

Use DDNS domain name and port to login

Make sure each camera you need add could login with DDNS name and port.

Click Multi-Device Settings. Choose The 2nd Device. Fill in the 2nd camera’s name, DDNS domain name, port number. Enter user name and password and then choose Add.

1 ---- The camera model: MJ or H264.

2 ---- The 2nd camera’s name

3 ---- Fill in the 2nd camera’s DDNS host not LAN IP

NOTE: The MJ series have the same HTTP Port NO. and Media Port NO.

4 ---- Enter the 2nd camera’s user name and password

5 ---- Click Add button and to take effect

NOTE: Here the Host must be entered as the second camera’s DDNS domain name, not its LAN IP.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

37

Return to video window. You will see all of the cameras accessible through the internet.

When you are away from home, you can use the first camera’s DDNS domain name and port to view all the cameras via internet.

4.3.5 Status Light

You can enable or disable status light.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

38

4.4 Network

This section will allow you to configure your camera’s IP, PPPoE, DDNS, Wireless Settings, UPnP and

Port.

4.4.1 IP Configuration

If you want to set a static IP for the camera, please go to IP Configuration page. Keep the camera in the same subnet of your router or computer.

Changing settings here is the same as using the IP Camera Tool.

It is recommended that you use the subnet mask, gateway and DNS server from your locally attached

PC. If you don’t know the subnet mask, gateway and DNS server, you can check your computer’s local area connection as follows:

Control Panel →Network Connections →Local Area Connections →Choose Support →Details


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

39

Set the same Subnet Mask and gateway of the camera with your

PC.

There are two DNS servers. You can set any of them. Same with gateway is also OK.

If you don’t know the DNS server, you can use the same settings as the Default Gateway.

4.4.2 Wireless Settings

Step 1: Choose “Settings” on the top of the camera interface, and go to the “Network” panel on the


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

40

left side of the screen, then click “Wireless Settings.”

Click the Scan button and the camera will detect all wireless networks around the area. It should also display your router in the list.

Click the Scan button to search for wireless networks.

Click the Page number to see other wireless networks devices if there are more than 10.

Step 2: Click the SSID (name of your router) in the list, the corresponding information related to your network, such as the name and the encryption, will be filled into the relevant fields automatically.

You will only need to fill in the password of your network. Make sure that the SSID, Encryption and the password you filled in are exactly the same for your router.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

41

2 Enter the password of your router.

1 Click the SSID of your router and the relevant information will be filled in the fields automatically.

Step 3: Please click on the Save button after all settings have been entered and disconnect the network cable. Never shut down the power of the camera until the IP camera is able to connect to the wireless network.

The LAN IP address will disappear on the window of IP Camera Tool when the camera is configuring a wireless connection. Wait about 1 minute, the camera should obtain a wireless connection, and the LAN

IP of the camera will show again on the window of the IP Camera Tool. The IP address may have changed after the camera receives a wireless connection; we recommend setting a static local IP address if this IP address changes by right clicking the camera in IP Camera Tools, setting a static IP, and pushing OK.

Congratulations! You have set up the wireless connection of the camera successfully.

NOTE :

If you fail to make a wireless connection, please refer to your seller or contact us directly for assistance.

4.4.3 Soft AP Password Settings

For the safety of your camera, we recommend you change the Soft AP password.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

42

4.4.4 DDNS

FOSCAM camera has embedded a unique DDNS domain name when producing, and you can directly use the domain name, you can also use the third party domain name.

FOSCAM domain name

Here take test09.myfoscam.org for example. Go to option of DDNS on the Settings->Network panel, you can see the domain name.

Now you can use http:// Domain name + HTTP Port to access the camera via internet.

Take hostname test09.myfoscam.org and HTTP Port no. 800 for example, the accessing link of the camera via internet would be http:// test09.myfoscam.org:800


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

43

Restore DDNS to factory: If you have configured Third Party DDNS successfully, but you want to use

Manufacturer’s DDNS again , here click this button and start Manufacturer’s DDNS Service.

User can also use third part DDNS, such as www.no-ip.com. ,www. 3322.com

4.4.5 UPnP

The default UPnP status is closed. You can enable UPnP, then the camera’s software will be configured for port forwarding. Back to the “Device Status” panel, you can see the UPnP status:

The camera’s software will be configured for port forwarding. There may be issues with your routers security settings, and sometimes may error. We recommend you configure port forwarding manually on


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

44

your router.

4.4.6 Port

This camera supports HTTP Port. HTTP Port is used to access the camera remotely. If you want to access the camera and view the video, the HTTP Port must both be configured correctly.

HTTP port: By default, the HTTP is set to 88. Also, they can be assigned with another port number between 1 and 65535. But make sure they can not be conflict with other existing ports like 25, 21.

ONVIF port:

By default, the ONVIF port is set to 888. Also, they can be assigned with another port number between 1 and 65535(except 0 and 65534). But make sure they can not be conflict with other existing ports.

HTTPS port: The default port is 443. You can use the url to access the camera: https:// IP + HTTPS

port.

RTSP port: The default port is 554. Only some IP Cameras have RTSP port.

Another way to change the HTTP port NO.

Step 1: Open the IP Camera Tool, select the camera you would like to change the port of, right click on the IP address, and click on ”Network Configuration”, this brings up the network configuration box as flowing figures.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

45

Step 2: Enter the username and password of the Administrator (default username is admin with a blank password), and click “OK” to apply changes.

Step 3: Wait around 10 seconds, you’ll see that the camera’s LAN IP address has changed. In our example it was changed to 2000, so we see http://192.168.8.102:2000 in IP Camera Tool. Also, the LAN

IP address is now fixed at a static IP address of http://192.168.8.102:2000. This IP address will not change even if the camera is powered off and back on, the camera will remain on this LAN IP address.

This is very important that a static LAN IP address is set, or you may have problems later with remote access and seeing the camera remotely if the camera loses power and reconnects on a different LAN IP address. Make sure you set a static LAN IP address!

If the camera cannot be accessed, please make sure the port forwarding is succeed.

4.4.7 Mail Settings

If you want the camera to send emails when motion has been detected, here Mail will need to be configured.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

46

1---- SMTP Server/ Port /Transport Layer Security

Enter SMTP server for sender. SMTP port is usually set as 25. Some SMTP servers have their own port, such as 587 or 465, and Transport Layer

Security usually is None. If you use Gmail, Transport Layer Security must be set to TLS or STARTTLS and SMTP Port must be set to 465 or 25 or 587, which port you choose should be decided by which

Transport Layer Security you select.

2---- SMTP Username/ password ID account and password of the sender email address

3---- Sender E-mail Mailbox for sender must support SMTP

4---- Receiver Mailbox for receiver need not support SMTP,you can set 4 receivers

5---- Save Click Save to take effect

6---- Test Click Test to see if Mail has been successfully configured.

Click Test to see if Mail has been successfully configured.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

47

If the test success, you can see the Success behind the Test, at the same time the receivers will receive a test mail.

If the test fails with one of the following errors after clicking Test, verify that the information you entered is correct and again select Test .

1) Cannot connect to the server

2) Network Error. Please try later

3) Server Error

4) Incorrect user or password

5) The sender is denied by the server. Maybe the server need to authenticate the user, please check it and try again

6) The receiver is denied by the server. Maybe because of the anti-spam privacy of the server

7) The message is denied by the server. Maybe because of the anti-spam privacy of the server

8) The server does not support the authentication mode used by the device

4.4.8 FTP Settings

If you want to upload record files and images to your FTP server，you can set FTP Settings.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

48

Figure a

Figure b

FTP server: If your FTP server is located on the LAN, you can set as Figure a.

If you have an FTP server which you can access on the internet, you can set as Figure b.

Port: Default is port 21. If changed, external FTP client program must change the server connection port accordingly.

FTP Mode: Here supports two modes: PORT and PASV.

Username/password: The FTP account and password.

Click Save to take effect.

Click Test to see if FTP has been successfully configured.

4.4.9 P2P

Access the IP Camera by Smart Phone (Android or iOS operating system)

First of all, you must open the P2P function of the IP Camera at “Settings --> Network --> P2P.”


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

49

Foscam App named Foscam on App Store and Google Play for iOS and Android devices.

NOTE：

If the QR code scanning is not successful, please input the UID on the bottom of the camera manually.

4.5 Video

This section allows you to configure Video stream settings, On screen display and Snapshot settings.

4.5.1 Video Settings

There are two ways to set the stream video settings. They are main stream video settings and sub stream video settings.

Enhanced Night video Definition: The camera will automatically drop the frame to extend the recording time in the night.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

50

Stream Type: There are four types to identify different streams you have set. If select the HD Mode, the clearer video will become, and it will take up more bandwidth; If select the Smooth Mode, the bandwidth is very narrow, and bit rate is large, that will lead to video can not play well. The Equilibrium Model is a value between HD Mode and Smooth Mode.

Resolution: The camera supports multiple types, For example: 960P, 720P, VGA. The higher the resolution is the clearer video will become. But the code flux will become larger too, and it will take up more bandwidth. (The maximum frame rate for each model is different, please see the

“

Specifications”. )

Bit Rate: Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration should combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate is large, that will lead to video can not play well.

Frame rate: You should lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15, you can achieve fluently video.

Key Frame Interval: The time between last key frame and next key frame. The shorter the duration, the more likely you will get a better video quality, but at the cost of higher network bandwidth consumption.

Variable bitrate: Select the Bit rate type to constant or variable. If select Yes, the camera will change the video bit rate according to the situation, but will not more than the maximum parameter "Bit Rate"; If select No, the Bit

Rate is unchanged.

4.5.2 On Screen Display

This page is used to add timestamp and device name on the video.

Display Timestamp

There are two options: Yes or NO. Select Yes and you can see the system date on the video.

Display Camera Name

There are two options: Yes or NO. Select Yes and you can see the device name on the video.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

51

4.5.3 Snapshot Settings

On this page you can set the snapshot pictures’ image quality and the storage path.

Manual snap Quality: Low, Middle and High. The higher the quality, the picture will be clearer.

Pictures Save To: FTP or SD card. If you have done FTP and Alarm settings, when alarming, the camera will snap pictures to the FTP or SD card automatically.

Enable timing to capture

To enable capture interval, follow the steps below:

1 Select Enable Motion detection

2 Capture interval:The interval time between two captures.

3 Select the capture time

 Capture anytime

Click the black button up the MON, you will see all time range turn red. When something moving in the detection area at anytime, the camera will capture.

 Specify an capture schedule

Click the week day words, the corresponding column will be selected. For example, click TUE, the all column of TUE turns to red, that means during Tuesday whole day, the camera will capture.

 Press the left mouse and drag it on the time boxes, you can select the serial area,

4 Click Save button to take effect.

4.5.4 IR LED Schedule

On this page you can set the schedule time for switching IR LED lights. When parameter Mode is set to the Schedule on the Live Video window, at these schedule time, the IR LED lights will be turned off.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

52

4.6 Alarm

Action Detection

IP Camera supports Action Detection Alarm, when the people has been detected, the IP Camera will make a alarm.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

53

Step 1:

Enable Action detection function.

Step 2:

Select the “on” from the dropdown box to activate the motion detection alarm.

Step 3:

Select the “on” from the dropdown box to activate the human detection alarm.

Step 4: Sensitivity

---- It supports five modes: Lowest, Lower, Low, Medium and High. The higher the sensitivity, the camera will be more easily alarmed. Select one motion sensitivity.

Step 5: Trigger interval

--- The interval time between two motion detection.

Step 6: There are some alarm indicators:


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

54

A Camera Sound and PC Sound

If the camera has connected with a speaker or other audio output device, if you select Camera Sound or

PC Sound, when the motion has been detected, the people around the camera will hear beep alarm sound.

B Send E-mail

If you want to receive alarm emails when motion is detected, you must select Send E-mail and set Mail

Settings first.

C Take Snapshot

If you select this checkbox, when the motion has been detected, the camera will snap the live view window as a still picture and load it to the FTP. Make sure you have set FTP and set FTP as the storage path in Video->Snapshot settings panel.

Time interval: The interval time between two pictures.

D Recording

If you select this checkbox, when the motion has been detected, the camera will record automatically and store the record files to the SD Card.

Make sure the camera has inserted SD card and you have set the SD card as the Alarm record files storage path, please go to Record—> Storage location page to verify this settings.

The default alarm record time is 30s and pre-alarm record time is 5s, please go to Record—> Alarm

Record page and change the alarm time settings.

Step 7: Set detection area

Click set detect area and it pop up a window, then you can draw the detection area. Click Back button after settings. When something moving in the detection area, the camera will alarm.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

55

Step 8: Alarm Schedule

① Alarm anytime when motion is detected

Click the black button up the MON, you will see all time range turn red. When something moving in the detection area at anytime, the camera will alarm.

Click this button and select all time range

②

Specify an alarm schedule

Click the week day words, the corresponding column will be selected. For example, click TUE, the all column of TUE turns to red, that means during Tuesday whole day, when something moving in the detection area, the camera will alarm.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

56

③ Press the left mouse and drag it on the time boxes, you can select the serial area.

Step 9: Click Save button to take effect.

When the motion has been detected during the detection time in the detection area, the camera will alarm and adopt the corresponding alarm indicators.

NOTE:

You must set the detection area and detection schedule, or else there is no alarm anywhere and anytime.

4.7 Record

This section will allow you to change the record files storage path and the record time.

4.7.1 Storage Location

On this page you can change the alarm and manually recording storage path.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

57

Recording Location : SD card or FTP. Make sure the camera has been inserted the SD card. On this page, you can see the available space of the SD card.

Local Recording Location: For Windows OS, the manual recording path is C:/ IPCamRecord, you can change another one. For MAC OS, the manual recording path is: / IPCamRecord.

4.7.2 Alarm Recording

4.7.3 Local Alarm Recording

This page you can enable the local alarm record and Local Alarm record time.

4.7.4 Schedule Recording

When the video is selected as FTP, the device supports scheduled recording.

When the parameter Recording Location is set SD Card on the Storage Location page, you can configure parameters as shown in follow figure.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

58

When the video is selected as SD card, the device supports pumping frame recording.

When the parameter Recording Location is set SD Card on the Storage Location page, you can configure parameters as shown in follow figure.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

59

Frame Rate: There are six frame selections, such as 1/30, 4/30, 8/30, 15/30, 24/30, 30/30.

Recommended default is 4/30. The greater the Frame rate is, the sharper picture quality is, and the greater of storage space is, the shorter the storage time is.

Record full strategy: When the SD card is full, you can choose to cover the previous recording, or stop recording.

Audio Record: You can choose "yes" or "no".

NOTES:

 Scheduled recording only supports video saved to the SD card or FTP server.

 The schedule recording will stop while alarm recording is beginning, and it will continue automatically after alarm recording end.

 You can refer to "alarm schedule." in "Alarm" about editing the time of recording Schedule.

4.7.5 SD Card Management

This camera supports SD Card and the max size of SD card must be under 32G.

When you plug in the SD card during the camera work process, please reboot the camera again, or else the SD Card may be cannot work well.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

60

The default storage path of alarm record files is SD card, when the available size of SD card is less than

256M, the old record files will be deleted automatically.

4.8 Firewall

This section explains how to control the access permission by checking the client PC’s IP addresses. It is composed of the following columns: Block access from these IP addresses and Only allow access

from these IP addresses.

Enable firewall, If you select Only allow access from these IP addresses and fill in 8 IP addresses at most, only those clients whose IP addresses listed in the Only allow access from these IP addresses can access the Network Camera. If you select Block access from these IP addresses, only those clients whose IP addresses are in the IP list cannot access the Network Camera.

Click Save to take effect.

4.9 System

In this panel, you can backup/restore your camera settings, upgrade the firmware to the latest version, restore the camera to default settings and reboot the device.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

61

4.9.1 Back-up& Restore

Click Backup to save all the parameters you have set. These parameters will be stored in a bin file for future use.

Click Browse and select the parameters file you have stored, then click Submit to restore the restore the parameters.

4.9.2 System Upgrade

Click “Download the latest firmware”, you will see the following screen. And click “save” to save the firmware on your computer locally.

Your current firmware version will be displayed on your screen. You may go to the Status  Device

Information page to check for the latest firmware versions available.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

62

Click Browse, choose the correct bin file and then click System upgrade.

Don’t shut down the power during upgrade. After upgrading, you can see the upgrade result.

Upgrade Firmware by IP Camera Tool

Double click the IP Camera Tool shot icon , select the Camera IP that you want to upgrade the firmware. Then select Upgrade Firmware and enter the username and password, choose the firmware file, and upgrade.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

63

CAUTION: If your camera works well with the current firmware, we recommend not upgrading. Please don’t upgrade the firmware unnecessarily. Your camera may be damaged if misconfigured during an upgrade.

NOTES:

 Please ensure you have download the correct firmware package for your camera before upgrading.

Read the upgrade documentation (readme.txt file) in the upgrade package before you upgrade.

 Upon downloading the firmware check the sizes of the .bin files. They must match the size in the readme.txt file. If not, please download the firmware again until the sizes are the same. Your camera will not function correctly if a corrupt .bin file is used.

 Normally, only Device WEB UI need to be upgrade, please do not try to upgrade the Device System

Firmware.

 Never shut down the power of the camera during upgrade until the IP camera restart and get connected.

 After upgrade successfully, please uninstall the old plugin and re-install it, then reset the camera to the default factory settings before using the camera.

4.9.3 Patch Installation

Click "Browse" to select the correct patch file, and then click "Install Patch" to install the patch. Do not turn off the power during it installing. After installing is complete, you will receive a system prompt.

4.9.4 Factory Reset

Click All reset and all parameters will return to factory settings if selected. This is similar to press the

Reset button on the bottom of the camera.

4.9.5 Reboot

Click Reboot System to reboot the camera. This is similar to unplugging the power to the camera.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

64

5 Playback

On this page you can view the record files stored in the SD card.

Section 1 Define the Record files time and Type

: The storage path of record files

: Here supports three types: current day, current month and All records. Another way, select the time on the time&date manually.

: The type of records files, Here supports two typs: Normal record, Alarm record and All records.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

65

: Click this button to search all record files satisfy the conditions you selected.

Continuous Play: Select the checkbox to play continuously all the record files.

Section 2 Search record files

On this panel you can see all record files satisfy the conditions you set.

Section 3 Play/Stop/Audio/Full screen buttons

Please select one record file before use these buttons.

Click this button to play the record files

Click this button to stop the record files

Open or stop audio

Click this button to make full screen, and double click left mouse to exit full screen.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

66

6 Appendix

6.1 Frequently Asked Questions

6.1.1 Install the add-on of Firefox browser, Google Chrome and IE

Chrome.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

67


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

68


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

69


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

70

6.1.2 Uninstall the add-on of Firefox browser, Google Chrome and IE

Chrome.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

71

6.1.3 I have forgotten the administrator password

To reset the administrator username and password, press and hold down the RESET BUTTON for 5 seconds. Upon releasing the reset button, wait for 20 seconds, the camera will reboot and the username and password will return to the factory default administrator username and password. Please power on the camera before reset

Default administrator username: admin

Default administrator password: No password

6.1.4 Camera can not record

When you use Windows7 or Vista, you may be not able to do manually record or change the record path because of the security settings of computer.

There are two ways to resolve this problem:

Please add the camera as a trusted site to resolve this issue. The steps are ：

IE browserToolInternet PropertiesSecurityTrusted sitesSitesAdd


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

72

Open IE browser, then right click, select “Run as administrator”

6.1.5 Subnet doesn’t match

Check whether your ipcamera in the same subnet of your computer. The step is Control

PanelNetwork ConnectionsDbclick Local Area Connections  Choose

GeneralProperties.Check subnet mask, IP address and gateways. When you set IP address please make sure they are in the same subnet. Otherwise you can't access camera.

6.1.6 No Pictures Problems

The video streaming is transmitted by the ActiveX controller. If ActiveX controller isn’t installed correctly you will see no video image. You can resolve this problem by this way:

Download ActiveX controller and set the safety property of IE in the PC when you view it first time: IE browserToolInternet ProperSecurityCustom LevelActiveX control and Plug-ins. Three options of front should be set to be “Enable”, The ActiveX programs read by the computer will be stored. As follows:

Enable: Download unsigned ActiveX controls

Enable: Initialize and script ActiveX controls not marked as safe

Enable: Run ActiveX controls and plug-ins

If you allow the ActiveX running, but still could not see living video. Please change another port number to try. Don’t use port 88.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

73

NOTE: Make sure that your firewall or anti-virus software does not block the camera or ActiveX. If you could not see video, please shut down firewall or anti-virus software to try again.

6.1.7 Can’t access IP camera in internet

There are some reasons:

1、ActiveX controller is not installed correctly

2、The port which camera used is blocked by Firewall or Anti-virus software. Please change another port number and try again.

3、Port forwarding is not successful

Check these settings and make sure they are correct.

6.1.8 UPnP always failed

UPnP only contains port forwarding in our recent software. Sometimes, it may be failed to do port forwarding automatically because of firewall or anti-virus software. It also has much relation with router’s security settings. So we recommend you do port forwarding manually. You can view your camera in internet successfully after you do port forwarding manually in your router.

6.1.9 Camera can not connect wireless

If your camera could not connect wireless after you set wireless settings and plug out the cable. Please check whether your settings are correct or not.

Normally, camera can’t connect wireless mainly because of wrong settings.

Make sure broadcast your SSID; use the same encryption for router and camera.

6.1.10 Can’t see other cameras listed in multi-device when using remote access

If you want to view all the cameras via the WAN, verify that each camera added in the multi-device settings can be accessed by using the DDNS name and port number. Use the DDNS domain name not the camera’s LAN IP. (For more details see: How to add cameras in WAN)

6.2 Default Parameters

Default network Parameters

IP address: obtain dynamically


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

74

Subnet mask: obtain dynamically

Gateway: obtain dynamically

DDNS: Embedded FOSCAM domain name

Username and password

Default admin username: admin with a blank password

6.3 Specifications

ITEMS

Sensor

Image Sensor

Display Resolution

Min. Illumination

Lens

Video

Audio

C1

High Definition Color CMOS Sensor

1280 x 720 (1Megapixels)

0 Lux (With IR Illuminator)

Lens Type focal length

Aperture

Glass Lens f:2.8mm

F2.4

Diagonal angle of view 115°

Horizontal view angle 100°

Image Compression H.264

Image Frame Rate

Resolution

25fps（VGA）, 23fps（720P）, downward adjustable

720P(1280 x 720), VGA(640 x 480), VGA(640 x 360),

QVGA(320 x 240), QVGA(320 x 180)

Stream

Image adjustment

Flip image

Infrared mode dual stream

The hue, brightness, contrast, saturation, sharpness are adjustable flip and mirror

Automatic or manual manual Pan/Tilt Angle Horizontal:350° & Vertical: 180°

Night visibility 11pcs IR-LEDs, night vision range up to 8 metres

Input/Output

Audio Compression

Ethernet

Supports two-way audio

Built-in Mic & Speaker

PCM/G.726

One 10/100Mbps RJ45 port

Wireless Standard IEEE802.11b/g/n

Network

Data Rate

Wireless Security

WPS

IEEE802.11b: 11Mbps(Max.);

IEEE802.11g: 54Mbps(Max.);

IEEE802.11n: 150Mbps(Max.).

WEP, WPA, WPA2

Supports EZLink wireless setup


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

75

System

Requirements

Other

Features

Network Protocol

Remote Access

Operating System

Browser

Motion Detection

PIR

User Accounts

Firewall

Storage

IP、TCP、UDP、HTTP、HTTPS、SMTP、FTP、DHCP、DDNS、

UPnP、RTSP、WPS

P2P, DDNS

Microsoft Windows XP, Vista, 7, 8;

Mac OS iOS、Android

Microsoft IE8 and above version or compatible browser;

Mozilla Firefox;

Google Chrome;

Apple Safari.

Alarm via E-Mail, upload alarm snapshot to FTP

Infrared human body sensor

Three levels user role

Supports IP Filtering

32G Micro SD card, local and FTP storage

Power

Physical

Reset

Power Supply

Power Consumption

Reset button is available

DC 5V/1.0A

4.5W（Max）

Dimension(LxWxH)

Net Weight

Operating Temperature

70*70*120mm

170g

-10°C ~ 50°

(14°F ~ 122°F)

Environment

Operating Humidity

Storage Temperature

Storage Humidity

Certification

CE, FCC, RoHS

Warranty

Limited 2-year warranty

20% ~ 85% non-condensing

-20°C ~ 60° (-4°F ~ 140°F)

0% ~ 90% non-condensing

Attention: Power adapter should be used between 0℃-40℃, and 5%-90% relative humidity.

6.4 CE & FCC

Electromagnetic Compatibility (EMC)

FCC Statement

This device compiles with FCC Rules Part 15. Operation is subject to the following two conditions.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

76

 This device may not cause harmful interference

 This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the installation manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is like to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

FCC Caution

Any changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

CE Mark Warning

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

6.5 Warranty

ShenZhen FOSCAM Intelligent Technology Limited.("FOSCAM") values your business and always attempts to provide you the very best of service.

No limited hardware warranty is provided by FOSCAM unless your FOSCAM product ("product") was purchased from an authorized distributor or authorized reseller. Distributors may sell products to resellers who then sell products to end users. No warranty service is provided unless the product is returned to an authorized return center in the region where the product was first shipped by FOSCAM or to the point-of-purchase, which may have regional specific warranty implications.

If you purchase your FOSCAM product from online store, please contact the point-of-purchase and ask for return/replacement/repair service.

Hardware Warranty Information

FOSCAM provide 2-year limited warranty for naked product and 6-month limited warranty for accessories.


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

77

Limited Hardware Warranty



FOSCAM products are warranted to be free from manufacturing defects in materials and workmanship starting from the shipping date of FOSCAM.

This limited hardware warranty does not cover:

 Software, including the software added to the products through our factory-integration system, software that included in the CD,etc.



Usage that is not in accordance with product instructions.

 Failure to follow the product instructions.



Abuse firmware upgrade without the authorized technician’s guidance.



Normal wear and tear.

Return Procedures

 Please read FOSCAM warranty policy & policy of your reseller first before sending items back to point-of-purchase.

 Customer must first contact point-of-purchase to obtain a Return Merchandise Authorization (RMA) number before returning the product. If the product you received is suspected to be defective and the product warranty has not expired, The RMA number will allow your reseller to track your return much easier and help them expedite processing your request.

 After receiving your RMA case number, pack the item(s) very well with the original box and all the original accessories included such as power adapters, brackets, cables, manuals, and driver CD disks.



Write your RMA number and the return reason (the problem of the product) on the warranty card along with the complete package to send them back.

Replacement Services



If customers ask for replacement service, please contact point-of-purchase and follow their policy.

 Our technicians will inspect all items returned for replacement requests. If the retuned product is found in working order, we will return the same item received. However customers shall be responsible for all shipping & handling charges incurred for getting the units back to customers.



If returned products are found defective, we will replace the product and assume the shipping cost for sending back the replacement unit to customers.

 If for any reason, we are unable to provide a replacement of the original returned item(s). You will have a choice for a “Substitute” item at the same equal value.

 We do not provide exchange and replacement due to normal hardware upgrade according the market after 14 days after the product is delivered.

 Our technicians will test the product before send out the replacement, any other demand for more than two times replacement for the same product during replacement limit will be rejected.



Replaced products are warranted from the balance of the former warranty period.

Warranty Forfeiture

 Warranty is void if purchase from unauthorized distributor or reseller.



Warranty is void if trade-mark, serial tags, product stickers have been removed, altered or tampered


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

78

with.

 Warranty is void for mishandling, improper use, or defacing the product.



Abuse firmware upgrade without the authorized technician’s guidance.

 Warranty is void for physical damage, altered, either internally or externally, improper or inadequate packaging when returned for RMA purposes.

 Warranty is void if damage has resulted from accident, dismantle, abuse, or service or modification by someone other than the appointed vendor, souse, fission or the spare part has been over the period of warranty.

 Warranty is void if product is damaged due to improper working environment or operation. (For example, improper temperature, humidity, unusual physical or electrical stress or interference, failure or fluctuation of electrical power, static electricity, using wrong power adapter, etc.)

 Warranty is void if damaged by the use of parts not manufactured or sold by FOSCAM.

 Damage caused by improper installation of third-party products.

 Warranty is void if damaged for irresistible cause, such as earthquake, fire, lightning, flood, etc.

 Product beyond limited warranty.

Shipping Fee

 If products are defective or damaged under normal use or operation in the replacement limit, distributors or resellers are responsible for the shipping cost the product back to customers, customers should assume the shipping cost send the product to the point-of-purchase.

 During replacement limit, if customers ask for replacement due to the product does not fit for customer’s personal expectation, customers should responsible for both shipping fee.

 Customers shall be responsible for both shipping fee if their product beyond the replacement limit but still in warranty limit.

Repair Service Out Of Warranty



FOSCAM provide extra repair service for product that out of warranty, it is chargeable. The total fee contains device cost and service fee. Device cost (including accessories) is the standard uniform price provide by FOSCAM.



Different region may have different service fee, please contact the point-of-purchase to confirm that before you ask for this service.



Our technicians will quote the total price after detect the product, If customers refused to repair after the quotation, customers need pay for the test fee, $3.5/hour. If agree with the quotation, test will be free.



Repaired product out of warranty will obtains 3-month warranty from the date of the product back to customers.

Limitation of Liability



FOSCAM is not responsible for other extra warranty or commitment promised by resellers, if your reseller promised some extra commitment or warranty; please ask for written documents to protect your rights and interests.

 FOSCAM does not offer refunds under any circumstances. Please contact the point-of-purchase and follow their refund/return policy.



FOSCAM shall not be liable under any circumstances for any consequential, incidental, special or


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

79

exemplary damages arising out of or in any connection with this agreement or the products, including but not limited to lost profits, or any claim based on indemnity or contribution, or the failure of any limited or exclusive remedy to achieve its essential purpose or otherwise. Purchaser's exclusive remedy, as against FOSCAM, shall be the repair or replacement of defective parts. If

FOSCAM lists a product on its website specification in error or that is no longer available for any reason, FOSCAM reserves the right to explain it without incurring any liability.

All rights reserved. FOSCAM and the FOSCAM logo are trademarks of ShenZhen FOSCAM

Intelligent Technology Limited., registered in the U.S. and other countries.

7 Obtaining Technical Support

While we hope your experience with the IPCAM network camera is enjoyable and easy to use, you may experience some issues or have questions that this User’s Guide has not answered.

If you have problem with FOSCAM IP camera, please first contact FOSCAM reseller for solving the problems. If our reseller cannot provide service, please contact our service department:

[email protected]


Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

80

Foscam C1 Lite User manual

User

Manual

Indoor HD IP Camera

Table of Contents

1 Overview

1.1 Key Features

1.2 Read Before Use

1.3 Package Contents

1.4 Physical Description

Front panel:

Rear panel:

2 Access the IP Camera

2.1 Wired Connection

(1) http:// LAN IP + HTTP Port NO.

(2) https:// LAN IP + HTTPS Port NO.

2.2 Wireless Connection

Notes:

Notes:

Note:

(WI-FI Protected Set-up)

NOTE :

2.3 Access the Camera in WAN

How to Obtain the WAN IP address from a public website ？

2.4 Using the VLC player

user name & password:

For example:

NOTE:

2.5 IP camera connection to the server

3 Surveillance Software GUI

3.1 login Window

3.2 Setup Wizard

3

4

5

1

2

3.3 Surveillance Window

6

7

Section 1 FOSCAM Logo/ Live Video / Settings/Playback buttons

Section 2 Multi-Device Window

Section 3 Mode/ Stream / Mirror/ Flip buttons

Section 4 IR LED Lights

Section 5 Image quality settings

Section 6 OSD

Section 7 Play/Stop/ Talk/Audio/ Snap/ Record/ Full screen button

Onscreen Mouse Control

4 Advanced Camera Settings

4.1 Setup Wizard

4.2 Status

4.3 Basic Settings

How to change the password?

How to add account ?

How to change the username ?

Add cameras in LAN

Add cameras in WAN

4.4 Network

NOTE :

FOSCAM domain name

ONVIF port:

NOTE：

4.5 Video

4.6 Alarm

Click this button and select all time range

4.7 Record

4.8 Firewall

4.9 System

Upgrade Firmware by IP Camera Tool

5 Playback

Section 1 Define the Record files time and Type

Section 2 Search record files

Section 3 Play/Stop/Audio/Full screen buttons

6 Appendix

6.1 Frequently Asked Questions

6.2 Default Parameters

6.3 Specifications

ITEMS

Image Sensor

Lens