Remote Control Map
Turn the projector on
Turn the projector off
Select a source
Automatically adjust computer image
Change the aspect ratio
Display a test pattern
Adjust the image position
Open projector menus
Navigate through menu settings
Select menu settings
Temporarily turn off display and audio
Move to next or previous image when projecting from a computer over the network
Control volume
Display the Info menu
Open menus assigned by user
Display the projector ID and remote ID
Control one or multiple projectors
Port to connect remote control cable
Illuminate buttons temporarily
Switch image sources
Freeze the image
Select color modes
Split the screen between two inputs
Adjust the focus
Cancel current operation or return to previous menu
Change the image size
Reset menu settings to their default value
Zoom in or out on part of an image
Correct image distortion
Save and apply presets
Use to enter numbers
Display the Home screen
EB-PU2113W/EB-PU2213B/EB-PU2116W/EB-PU2216B/
EB-PU2120W/EB-PU2220B
Quick Reference
This Quick Reference card gives brief instructions on connecting your projector and using common features. For details, see the online
User’s Guide.
IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User’s Guide.
EPSON, Instant Off, and Quick Corner are registered trademarks and EPSON Exceed Your Vision is a registered logomark of Seiko Epson
Corporation.
PrivateLine is a registered trademark of Epson America, Inc.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
Mac and macOS are trademarks of Apple Inc., registered in the U.S. and other countries.
HDBaseT is a trademark of the HDBaseT Alliance.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.
Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2022 Epson America, Inc., 1/22
CPD-61928
Printed in XXXXXX
Note: The SDI ports are only available on the EB-PU2213B, EB-PU2216B, and EB-PU2220B.
Note: Availability of products varies by country.
Turning the Projector On
1. Turn on your computer or image source.
2. Remove the lens cover.
3. Press the On button on the projector or the remote control.
After the status light stays blue, the projector is ready.
Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the On button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the online User’s Guide.
If your image does not appear, see
“Switching Between Image Sources” or “Troubleshooting.”
Note: This projector requires a 220 V power source for normal operation. Limited functionality is temporarily available when connected to a 120 V power source. For details, see your online User Guide.
Changing the Language of the Projector Menus
The default language of the projector’s menu system is English, but you can change it as necessary.
1. Press the Menu button to access the projector’s menu system.
2. Select Extended > Language.
3. Select your language.
4. When you’re done, press the Menu button to exit.
Switching Between Image
Sources
Press the Search button or one of the source buttons (remote control), or the
Source Search button (projector).
Selecting the Lens Type
Make sure the Lens Type setting is correct for the lens you are using.
1. Press the Menu button.
2. Select Extended > Operation >
Advanced > Lens Type.
Note: If the Lens Type setting is greyed out, the projector has automatically detected the installed lens and you can skip the remaining steps.
3. Select the lens you are using.
4. When you’re done, press the Menu button to exit.
Changing Screen Type
Set the Screen Type setting to the screen’s aspect ratio.
1. Press the Menu button.
2. Select Extended > Display >
Screen > Screen Type.
3. Select the screen’s aspect ratio.
Note: The displayed image should match the screen’s size and aspect ratio.
4. When you’re done, press the Menu button to exit.
Note: After changing the screen type, you may need to change the aspect ratio of the projected image depending on the input signal. Press the Aspect button on the remote control to change the aspect ratio, if necessary.
Adjusting Image Position
1. Press the Lens Shift button
(remote control) or the Lens button
(projector).
2. Press the arrow buttons to adjust the position of the projected image.
3. When you’re done, press the Esc button to finish the adjustment.
If the projector is on a table, you can level the image by turning any of the projector’s adjustable feet.
Zooming and Focusing
1. On the remote control, press the
Zoom or Focus button.
On the projector, press the Lens button repeatedly until the focus or zoom adjustment screen is shown.
2. Press the or arrow buttons to make the adjustment.
3. Press the Esc button to finish the adjustment.
Correcting Image Shape
If your image is uneven on the sides, you can use the projector’s distortion correction features, such as
H/V-Keystone and Quick Corner ® , to adjust the shape. See the online
User’s Guide.
Making Other Image
Adjustments
For help on using the projector’s features to improve the image quality, see the online User’s Guide. You can also view information on how to adjust the image color, position, and edges
(Edge Blending) when projecting from multiple projectors to create one seamless widescreen image.
Turning the Projector Off
Press the Standby button to turn the projector off. If you see a confirmation message, press the Standby button again.
Note: If the Direct Power On function is enabled, you can unplug the projector or flip the switch controlling the outlet to which the projector is connected instead. To turn on this feature, see the online User’s Guide.
With Epson’s Instant Off ® technology, you don’t have to wait for the projector to cool down; just turn it off or unplug it when you’re done.
Troubleshooting
If you see a blank screen or the message No signal
• Make sure the status light on the projector is blue and not flashing, and the lens cover is removed.
• Make sure the cables are connected correctly. See the online User’s
Guide.
• You may need to change the image source. See “Switching Between
Image Sources.” Also make sure the source device is turned on.
If the projector and the notebook don’t display the same image
Windows ®
If you are using a Windows laptop, press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear.
On Windows 7 or later, hold down the
Windows key and press P at the same time, then click Duplicate.
Mac
On macOS 12, select System
Preferences > Displays > Display
Settings. Select the projector, then choose the mirror option for your display from the drop-down menu.
On macOS 11 and older, open System
Preferences and select Displays. Click the Arrangement tab and select the
Mirror Displays checkbox.
Where to Get Help
Manuals
For more information about using the projector, you can view or download the online manuals from the Epson website, as described below.
Internet support
Visit http://epson.com/support
(U.S.) or http://epson.ca/support
(Canada) and search for your product to download software and utilities, view manuals, get FAQs and troubleshooting advice, or contact Epson.
Speak to a support representative
To use the Epson ® PrivateLine ® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or
(905) 709-3839 (Canada).
Support hours are 7 am to 4 pm , Pacific
Time, Monday through Friday.
Days and hours of support are subject to change without notice. Toll or long distance charges may apply.
Purchase supplies and accessories
You can purchase screens or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766).
Or you can purchase online at
http://epsonstore.com (U.S. sales) or
http://epsonstore.ca (Canadian sales).
For a list of optional accessories, see the online User’s Guide.
Turning the Projector On
1. Turn on your computer or image source.
2. Remove the lens cover.
3. Press the On button on the projector or the remote control.
After the status light stays blue, the projector is ready.
Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the On button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the online User’s Guide.
If your image does not appear, see
“Switching Between Image Sources” or “Troubleshooting.”
Note: This projector requires a 220 V power source for normal operation. Limited functionality is temporarily available when connected to a 120 V power source. For details, see your online User Guide.
Changing the Language of the Projector Menus
The default language of the projector’s menu system is English, but you can change it as necessary.
1. Press the Menu button to access the projector’s menu system.
2. Select Extended > Language.
3. Select your language.
4. When you’re done, press the Menu button to exit.
Switching Between Image
Sources
Press the Search button or one of the source buttons (remote control), or the
Source Search button (projector).
Selecting the Lens Type
Make sure the Lens Type setting is correct for the lens you are using.
1. Press the Menu button.
2. Select Extended > Operation >
Advanced > Lens Type.
Note: If the Lens Type setting is greyed out, the projector has automatically detected the installed lens and you can skip the remaining steps.
3. Select the lens you are using.
4. When you’re done, press the Menu button to exit.
Changing Screen Type
Set the Screen Type setting to the screen’s aspect ratio.
1. Press the Menu button.
2. Select Extended > Display >
Screen > Screen Type.
3. Select the screen’s aspect ratio.
Note: The displayed image should match the screen’s size and aspect ratio.
4. When you’re done, press the Menu button to exit.
Note: After changing the screen type, you may need to change the aspect ratio of the projected image depending on the input signal. Press the Aspect button on the remote control to change the aspect ratio, if necessary.
Adjusting Image Position
1. Press the Lens Shift button
(remote control) or the Lens button
(projector).
2. Press the arrow buttons to adjust the position of the projected image.
3. When you’re done, press the Esc button to finish the adjustment.
If the projector is on a table, you can level the image by turning any of the projector’s adjustable feet.
Zooming and Focusing
1. On the remote control, press the
Zoom or Focus button.
On the projector, press the Lens button repeatedly until the focus or zoom adjustment screen is shown.
2. Press the or arrow buttons to make the adjustment.
3. Press the Esc button to finish the adjustment.
Correcting Image Shape
If your image is uneven on the sides, you can use the projector’s distortion correction features, such as
H/V-Keystone and Quick Corner ® , to adjust the shape. See the online
User’s Guide.
Making Other Image
Adjustments
For help on using the projector’s features to improve the image quality, see the online User’s Guide. You can also view information on how to adjust the image color, position, and edges
(Edge Blending) when projecting from multiple projectors to create one seamless widescreen image.
Turning the Projector Off
Press the Standby button to turn the projector off. If you see a confirmation message, press the Standby button again.
Note: If the Direct Power On function is enabled, you can unplug the projector or flip the switch controlling the outlet to which the projector is connected instead. To turn on this feature, see the online User’s Guide.
With Epson’s Instant Off ® technology, you don’t have to wait for the projector to cool down; just turn it off or unplug it when you’re done.
Troubleshooting
If you see a blank screen or the message No signal
• Make sure the status light on the projector is blue and not flashing, and the lens cover is removed.
• Make sure the cables are connected correctly. See the online User’s
Guide.
• You may need to change the image source. See “Switching Between
Image Sources.” Also make sure the source device is turned on.
If the projector and the notebook don’t display the same image
Windows ®
If you are using a Windows laptop, press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear.
On Windows 7 or later, hold down the
Windows key and press P at the same time, then click Duplicate.
Mac
On macOS 12, select System
Preferences > Displays > Display
Settings. Select the projector, then choose the mirror option for your display from the drop-down menu.
On macOS 11 and older, open System
Preferences and select Displays. Click the Arrangement tab and select the
Mirror Displays checkbox.
Where to Get Help
Manuals
For more information about using the projector, you can view or download the online manuals from the Epson website, as described below.
Internet support
Visit http://epson.com/support
(U.S.) or http://epson.ca/support
(Canada) and search for your product to download software and utilities, view manuals, get FAQs and troubleshooting advice, or contact Epson.
Speak to a support representative
To use the Epson ® PrivateLine ® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or
(905) 709-3839 (Canada).
Support hours are 7 am to 4 pm , Pacific
Time, Monday through Friday.
Days and hours of support are subject to change without notice. Toll or long distance charges may apply.
Purchase supplies and accessories
You can purchase screens or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766).
Or you can purchase online at
http://epsonstore.com (U.S. sales) or
http://epsonstore.ca (Canadian sales).
For a list of optional accessories, see the online User’s Guide.
Turning the Projector On
1. Turn on your computer or image source.
2. Remove the lens cover.
3. Press the On button on the projector or the remote control.
After the status light stays blue, the projector is ready.
Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the On button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the online User’s Guide.
If your image does not appear, see
“Switching Between Image Sources” or “Troubleshooting.”
Note: This projector requires a 220 V power source for normal operation. Limited functionality is temporarily available when connected to a 120 V power source. For details, see your online User Guide.
Changing the Language of the Projector Menus
The default language of the projector’s menu system is English, but you can change it as necessary.
1. Press the Menu button to access the projector’s menu system.
2. Select Extended > Language.
3. Select your language.
4. When you’re done, press the Menu button to exit.
Switching Between Image
Sources
Press the Search button or one of the source buttons (remote control), or the
Source Search button (projector).
Selecting the Lens Type
Make sure the Lens Type setting is correct for the lens you are using.
1. Press the Menu button.
2. Select Extended > Operation >
Advanced > Lens Type.
Note: If the Lens Type setting is greyed out, the projector has automatically detected the installed lens and you can skip the remaining steps.
3. Select the lens you are using.
4. When you’re done, press the Menu button to exit.
Changing Screen Type
Set the Screen Type setting to the screen’s aspect ratio.
1. Press the Menu button.
2. Select Extended > Display >
Screen > Screen Type.
3. Select the screen’s aspect ratio.
Note: The displayed image should match the screen’s size and aspect ratio.
4. When you’re done, press the Menu button to exit.
Note: After changing the screen type, you may need to change the aspect ratio of the projected image depending on the input signal. Press the Aspect button on the remote control to change the aspect ratio, if necessary.
Adjusting Image Position
1. Press the Lens Shift button
(remote control) or the Lens button
(projector).
2. Press the arrow buttons to adjust the position of the projected image.
3. When you’re done, press the Esc button to finish the adjustment.
If the projector is on a table, you can level the image by turning any of the projector’s adjustable feet.
Zooming and Focusing
1. On the remote control, press the
Zoom or Focus button.
On the projector, press the Lens button repeatedly until the focus or zoom adjustment screen is shown.
2. Press the or arrow buttons to make the adjustment.
3. Press the Esc button to finish the adjustment.
Correcting Image Shape
If your image is uneven on the sides, you can use the projector’s distortion correction features, such as
H/V-Keystone and Quick Corner ® , to adjust the shape. See the online
User’s Guide.
Making Other Image
Adjustments
For help on using the projector’s features to improve the image quality, see the online User’s Guide. You can also view information on how to adjust the image color, position, and edges
(Edge Blending) when projecting from multiple projectors to create one seamless widescreen image.
Turning the Projector Off
Press the Standby button to turn the projector off. If you see a confirmation message, press the Standby button again.
Note: If the Direct Power On function is enabled, you can unplug the projector or flip the switch controlling the outlet to which the projector is connected instead. To turn on this feature, see the online User’s Guide.
With Epson’s Instant Off ® technology, you don’t have to wait for the projector to cool down; just turn it off or unplug it when you’re done.
Troubleshooting
If you see a blank screen or the message No signal
• Make sure the status light on the projector is blue and not flashing, and the lens cover is removed.
• Make sure the cables are connected correctly. See the online User’s
Guide.
• You may need to change the image source. See “Switching Between
Image Sources.” Also make sure the source device is turned on.
If the projector and the notebook don’t display the same image
Windows ®
If you are using a Windows laptop, press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear.
On Windows 7 or later, hold down the
Windows key and press P at the same time, then click Duplicate.
Mac
On macOS 12, select System
Preferences > Displays > Display
Settings. Select the projector, then choose the mirror option for your display from the drop-down menu.
On macOS 11 and older, open System
Preferences and select Displays. Click the Arrangement tab and select the
Mirror Displays checkbox.
Where to Get Help
Manuals
For more information about using the projector, you can view or download the online manuals from the Epson website, as described below.
Internet support
Visit http://epson.com/support
(U.S.) or http://epson.ca/support
(Canada) and search for your product to download software and utilities, view manuals, get FAQs and troubleshooting advice, or contact Epson.
Speak to a support representative
To use the Epson ® PrivateLine ® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or
(905) 709-3839 (Canada).
Support hours are 7 am to 4 pm , Pacific
Time, Monday through Friday.
Days and hours of support are subject to change without notice. Toll or long distance charges may apply.
Purchase supplies and accessories
You can purchase screens or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766).
Or you can purchase online at
http://epsonstore.com (U.S. sales) or
http://epsonstore.ca (Canadian sales).
For a list of optional accessories, see the online User’s Guide.
Remote Control Map
Turn the projector on
Turn the projector off
Select a source
Automatically adjust computer image
Change the aspect ratio
Display a test pattern
Adjust the image position
Open projector menus
Navigate through menu settings
Select menu settings
Temporarily turn off display and audio
Move to next or previous image when projecting from a computer over the network
Control volume
Display the Info menu
Open menus assigned by user
Display the projector ID and remote ID
Control one or multiple projectors
Port to connect remote control cable
Illuminate buttons temporarily
Switch image sources
Freeze the image
Select color modes
Split the screen between two inputs
Adjust the focus
Cancel current operation or return to previous menu
Change the image size
Reset menu settings to their default value
Zoom in or out on part of an image
Correct image distortion
Save and apply presets
Use to enter numbers
Display the Home screen
EB-PU2113W/EB-PU2213B/EB-PU2116W/EB-PU2216B/
EB-PU2120W/EB-PU2220B
Quick Reference
This Quick Reference card gives brief instructions on connecting your projector and using common features. For details, see the online
User’s Guide.
IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User’s Guide.
EPSON, Instant Off, and Quick Corner are registered trademarks and EPSON Exceed Your Vision is a registered logomark of Seiko Epson
Corporation.
PrivateLine is a registered trademark of Epson America, Inc.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
Mac and macOS are trademarks of Apple Inc., registered in the U.S. and other countries.
HDBaseT is a trademark of the HDBaseT Alliance.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.
Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2022 Epson America, Inc., 1/22
CPD-61928
Printed in XXXXXX
Note: The SDI ports are only available on the EB-PU2213B, EB-PU2216B, and EB-PU2220B.
Note: Availability of products varies by country.
Remote Control Map
Turn the projector on
Turn the projector off
Select a source
Automatically adjust computer image
Change the aspect ratio
Display a test pattern
Adjust the image position
Open projector menus
Navigate through menu settings
Select menu settings
Temporarily turn off display and audio
Move to next or previous image when projecting from a computer over the network
Control volume
Display the Info menu
Open menus assigned by user
Display the projector ID and remote ID
Control one or multiple projectors
Port to connect remote control cable
Illuminate buttons temporarily
Switch image sources
Freeze the image
Select color modes
Split the screen between two inputs
Adjust the focus
Cancel current operation or return to previous menu
Change the image size
Reset menu settings to their default value
Zoom in or out on part of an image
Correct image distortion
Save and apply presets
Use to enter numbers
Display the Home screen
EB-PU2113W/EB-PU2213B/EB-PU2116W/EB-PU2216B/
EB-PU2120W/EB-PU2220B
Quick Reference
This Quick Reference card gives brief instructions on connecting your projector and using common features. For details, see the online
User’s Guide.
IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User’s Guide.
EPSON, Instant Off, and Quick Corner are registered trademarks and EPSON Exceed Your Vision is a registered logomark of Seiko Epson
Corporation.
PrivateLine is a registered trademark of Epson America, Inc.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
Mac and macOS are trademarks of Apple Inc., registered in the U.S. and other countries.
HDBaseT is a trademark of the HDBaseT Alliance.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.
Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2022 Epson America, Inc., 1/22
CPD-61928
Printed in XXXXXX
Note: The SDI ports are only available on the EB-PU2213B, EB-PU2216B, and EB-PU2220B.
Note: Availability of products varies by country.
