Item Part Name Part # Qty
Assembly Instructions
ZET1
task chair
A
B
C
K
L
I
J
M
N
G
H
E
F
C
D
A
B
Back Frame Black/White G00352/G00353
Right Arm Black/White
Seat Mechanism
Gas Cylinder
G00354/G00355
G00356/G00357
Seat Frame Black/White G00358/G00359
G00360
Base Black/White
Caster
G00340
G00341/G00351
G00342
Medium M6x25
Long Bolt M6x35
Short Bolt M8x20
Lock Washer M8
Flat Washer M8
Hex Wrench 5mm
G00336
G00337
G00361
G00362
G00363
G00339
5
4
1
1
1
3
3
6
3
1
1
1
1
1
D
E
F
G
H
1
Base Assembly
Firmly snap Casters (H) into
Base (G).Place base on ground with casters attached. Drop Gas
Cylinder (F) into base with narrow end pointing up.
F
G
Hx5
C
Jx3
4
Seat /Back Assembly
Mechanism
Mechanism
E
Tighten Back Frame to the Seat using Short
Bolt (K), Lock Washer (L) and Flat Washer (M).
Warning
1. This product is for single person use only.
2. Do not use this chair unless all screws are securely tightened.
3. Check that all screws are tightened every six months or as needed.
4. Dispose of all packing materials properly. Do not place the plastic cover over the
5. Do not use this chair as a stepladder.
For assistance, call (888) 471-1616 or visit www. cherrymanindustries.com
2
Arm Assembly
Using Long Bolts(J) screw the
Arm(B,C)to the underside of the
Seat Frame(D).
3
Seat Mechanism Assembly
Using Medium Bolts(I) screw the
Seat Mechanism(E) to the underside of the Seat Frame(D).
J
Jx3
B
E
D
I
Ix4
5
Final Assembly
With the Base on the ground, carefullly align the Gas Cylinder with the hole in the center of the underside of the
Seat Mechanism, applying pressure.
M
L
K
Kx3
A
1/2
Slip Cover Assembly Instructions (Optional)
ZET1
task chair
1
Uninstall the seat shell by removing the screws with a philips screwdriver.
2
Unzip the seat cover.
3
Remove the cushion.
4
Put the cushion in the new seat cover.
5
Align the new cover with the holes and zip up the new seat cover.
6
Install the seat shell by installing the screws with a philips screwdriver.
2 /2
