GOGO KIDZ Travelmate NMJ2 Operating & Safety Manual

Go-Go Babyz Corporation

7011 Realm Drive, Suite A5

San Jose, CA 95119 phone: 1.888.686.2552

Fax: 1.408.360.7967

Email: [email protected]

Web: www.gogobabyz.com

gogo Kidz™ Travelmate

Operating &

Safety Manual

Model # NMJ2

Model # GGK2

Go-Go Babyz Corporation

SAFETY INSTRUCTIONS

DO NOT USE THE GOGO KIDZ UNTIL YOU READ AND

UNDERSTAND THESE INSTRUCTIONS. Your child’s safety depends on you reading and following these instructions.

!

WARNING Never leave child unattended.

!

WARNING Avoid serious injury from falling or sliding out. Always use Car seat restraint System.

By far, the most common injury reported for carriages and strollers resulted when a child fell or climbed out of a stroller because the restraint system was not being used. Please observe this safety warning at all times and be sure to follow the manufacturers instructions on how to properly secure your child in their car seat.

!

WARNING Do NOT exceed weight and size limitations of manufacturer.

This product is to be used as an add-on to you toddler car seat. The warnings and instructions are in addition to the safety manual provided by your car seat manufactuerer.

!

WARNING To Avoid Injury, keep child away from telescoping handle and knobs.

The telescoping handle is controlled by pushing the button on the top of the handle and manually pulling up on the handle or retracting the handle. The motion could injure a child by pinching or lacerating their fingers if they got caught near the handle extensions. The knobs are designed to be easily removed. Do not allow a child to turn or twist the knobs. A child removing the knobs may cause injury if the unit is accidentaly removed and falls on child or the child attempts to swallow the knobs. IT IS NOT A TOY! Please keep child away from the handle and knobs.

!

WARNING This is not an exercise Stroller!

Do not use this product while running, jogging, in-line skating or participating in other athletic activities.

EXPRESS LIMITED WARRANTY

Go-Go Babyz Corporation (“Go-Go Babyz”) warrants this product to be free from defects in materials and workmanship for a period of one year from the date of purchase. Go-Go Babyz will repair or replace, at its sole option, the defective product within that one-year time period.

If you have a problem with your Go-Go Babyz product or are not satisfied with it, please contact Go-Go Babyz Customer Service at 1.888.686.2552.

This express limited warranty does not cover:

(1) Pick-up, delivery, or freight charges.

(2) Corrosion caused by improper storage or failure to reasonably protect the stroller from salt water and adverse conditions.

(3) Deterioration due to lack of maintenance and cleaning as specified in the product instructions.

Go-Go Babyz SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CON-

SEQUENTIAL DAMAGES ARISING FROM BREACH OF ANY EXPRESS

OR IMPLIED WARRANTY ON THIS PRODUCT. ANY IMPLIED WARR-

ANTY, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO THE

DURATION OF THE EXPRESS, LIMITED WARRANTY (ONE-YEAR

FROM THE DATE OF PURCHASE).

Under no circumstance shall any liability of Go-Go Babyz under this Express

Limited Warranty, or otherwise, exceed the price of the defective product or parts.

Note: Some states do not allow the exclusion or limitation on incidental or consequential damages, so the above limitation may not apply to you.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

This Express Limited Warranty gives you specific legal rights, and you may have other rights, which vary from state to state.

Go-Go Babyz’ CUSTOMER SERVICE FOR INFORMATION AND ALL

RETURNS:

Go-Go Babyz Returns

7011 Realm Drive, Suite A5

San Jose, CA 95119

888.686.2552

CARE AND MAINTENANCE

Before connecting the gogo Kidz ™ to your Britax® car seat, make sure the unit is assembled correctly and all parts and fasteners are secure.

After assembly pull horizontally on the back of the gogo Kidz to make certain the guides are aligned properly and there is no slippage.

Confirm that knobs are tight and there is no space between the gogo Kidz plate and the car seat.

Periodically check for worn parts and loose screws. Also, check that the handle, axle and wheels are secure.

Replace any damaged parts immediately.

Clean with a damp cloth and wipe dry.

Do not store unit outside exposed to rain or extreme sunlight.

Do not place heavy items on top of unit when storing it.

!

!

WARNING

WARNING never leave child alone with the gogo kidz assembled onto the car seat. unit may rotate backwards and create injury to your child.

Excessive weight, parcels, or accessory items placed or hung on the handle may cause the unit to become unstable.

- Do not place parcels or accessory items on the handle.

- Do not allow children to play with or hang onto the stroller.

! WARNING Do not allow children to climb into or out of the car seat while gogo Kidz is secured.

! WARNING Never use stroller on stairways or escalators.

! WARNING Always ensure knobs are tight when- ever the gogo Kidz is attached to the car seat

- Injury to your child could result if the unit where to come off accidentally when traveling with your child.

! WARNING The stroller is designed to roll.

! WARNING Do not leave the gogo Kidz attached to the Britax car seat while driving in an automobile. The gogo Kidz has not been tested in combination with the Britax seats in any crash testing program and injury to your child could occur.

How to properly

Assemble your gogo Kidz™ Travelmate

For the Roundabout®, Marathon™ & Decathlon™

Step 1. Lay seat face down and insert retainer bar in between seat-belt holder of car seat.

Special Instructions for transporting your child in the gogo Kidz™ Travelmate

The gogo Kidz needs no special instructions when transporting the Britax® seat from place to place. However, when transporting a child over 35 lbs., strapped in the seat, follow these instructions:

Step 1. Attach the gogo Kidz to the Britax car seat by following the assembly instructions. After the gogo Kidz is attached to the Britax seat, and the handle is in the collapsed position, pull 10 inches of the “versa-tether” strap from the pouch that is located on the rear of the seat near the top.

Tether Pouch

Step 2.

Align the bottom tabs with the bottom of the car seat and lay the gogo Kidz plate on the back of the car seat.

Step 3. Insert the screws into the holes on the back of the plate and tighten.

You may need to pull up on the bar while screwing.

Step 2.

Pull the strap over the handle and tighten the “versa-tether” by pulling on the end of the tether strap. Place excess strap back into the pouch.

Tuck in all remaining latch and tether straps in order not to get tangled when in use.

Step 3. Always secure your child with the safety harness provided by the car seat manufacturer.

Special Instructions for Inserting the Retainer

Bar with the Wizard® or Boulevard™ car seat

Please follow the instructions above for complete assembly.

To attach the Wizard/Boulevard Retainer Bar, roll the cut out portion around the bar in the back of the seat, starting from the bottom with the cut out prtion facing the top of the seat.

The two conical sections should be facing towards you at this point. Use the fingers of one hand to align the conical shapes with the holes int he main plate and thred the Thumbscrews with the other hand.