advertisement
NewGen Toaster
2 & 4 slot
Instruction Manual & Guarantee
Original Instructions
TOASTING SINCE 1945
For decades, Dualit toasters have reflected an attitude that’s fundamentally British. They are a symbol of the fact that it’s the simple things in life that are the most rewarding and the most important.
Dualit toasters can turn out hundreds of crisp, golden slices per hour. They are gleaming, sturdy and tough as old boots. And as much a part of
British life as toast itself.
It should come as no surprise that the man who invented the Dualit toaster was an engineer. In 1946, Max Gort-Barten produced the original Dualit toaster from his workshop just off London’s Old Kent Road.
Combining strength, versatility and ingenuity it was a toaster that set new standards, soon followed by a commercial toaster, incorporating a time switch among its many (entirely) original features.
Manually operated and designed for heavy-duty use, each Dualit toaster is a blend of the simple and highly sophisticated. Each toaster is assembled by hand, much as it always was.
The assembler’s individual name will be found on the base plate. In an age in which so much becomes obsolete overnight, the Dualit toaster is built without compromise. It remains one of the few objects to survive the passing of the years with grace and style.
DON’T FORGET
TO REGISTER
YOUR PRODUCT
WWW.DUALIT.COM/REGISTER
OR BY POST
2
CONTENTS
Safety precautions
Before first use
Setting up
Toasting tips
Know your Toaster
Accessories
The selector
Toasting bread
Toasting frozen bread
Making toasted sandwiches
Cleaning and care
Thermal protection device
Resetting thermal fuse
Replacement parts
Replacement elements
Troubleshooting
Guarantee
Design Registration No. 4020988, 3000460, 4020987. Trade Mark: 48728.
Patent No. EP15703803.5, GB2522889, GB2453812.
3
04
05
06
07
08
10
11
12
14
18
19
20
15
16
17
21
23
IMPORTANT SAFETY PRECAUTIONS
READ ALL
INSTRUCTIONS
B
EFORE USING THE TOASTER KEEP
THESE INSTRUCTIONS FOR FUTURE
REFERENCE
IMPORTANT
SAFEGUARDS
• THIS IS AN ATTENDED
APPLIANCE. D
o not leave unattended during use, UNPLUG after each use (risk of fire if an unattended appliance is left operating or plugged in).
• T
his appliance must not be used by children younger than 8 years old and persons with very extensive and complex disabilities. Children aged 8-14 years and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge shall not use this appliance, unless they are supervised and have been given instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children less than 8 years old.
• D
o not use outdoors. This appliance is intended for indoor household use only. If the appliance is used improperly or for professional or semi-professional purposes or if it is not used according to these instructions the Guarantee becomes invalid and Dualit refuses any liability for damage caused.
• T
his appliance is intended to be used in households and similar applications such as working environments including staff kitchen areas in shops and offices, farm houses, clients in hotels, motels, bed and breakfasts and other residential environments.
E
lectrical safety
• B
efore plugging in, check that the voltage on the rating label is the same as the mains supply.
• W
e recommend that the toaster is plugged into a socket that has no other appliance connected to it. Failure to do this may cause an
4 overload, trip a circuit breaker or blow a fuse.
Preferably the socket outlet should be protected by a Residual Current device (RCD).
• U
nplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliances.
• S
hould any of the lights remain illuminated after using the appliance, immediately unplug the toaster and call service centre.
• I
f the timer sticks, unplug and do not use. Spare timers are available from www.dualit.com and must be fitted by a qualified electrical engineer.
• T
he toaster is not intended to be operated by means of an external timer or separate remotecontrol system.
• T
o protect against electric shock, do not immerse any part of this product in water or other liquid.
• N
OTE: Any plug cut from power supply cord should be disposed of immediately. Inserting any cut off plug into a 13A socket-outlet is hazardous.
• D
o not operate any appliance with a damaged lead or plug, or after the appliance malfunctions or has been damaged, cracked or dropped in any manner.
• I
f the power cord is damaged it must, for safety reasons, be replaced by Dualit or an authorised
Dualit repairer.
• N
ever use the plug without the fuse cover fitted. Ensure replacement fuse is the same current value as original.
• R
eplacement fuses should be ASTA approved to BS 1362.
• WARNING: T
his appliance must be earthed.
G
eneral safety
• D
o not use foods, including tarts and pastries, that may drip fillings or coatings containing sugar when heated in your toaster, as may cause a fire.
• W
hen in use a fire may occur if the toaster is covered or touching flammable material.
• D
o not place on or near a hot gas burner or electric hob, or in a heated oven.
• B
read may burn. Therefore toasters must not be used near or below curtains and other combustible materials.
• D
o not attempt to dislodge bread when the toaster is plugged in.
• C
rumb tray must be in place during toasting.
• C
rumb tray should be regularly cleaned. A build up of crumbs can burn or cause a fire.
• D
o not allow cable to touch hot surfaces, or to hang over edge of a table or counter top.
• K
eep the appliance and its cord out of reach of children.
• D
o not use appliance for any purpose other than the intended use.
• D
o not store or use toaster in an appliance garage or under cupboards.
• D
o not put a pan on top of the toaster or warming rack.
• U
se for a maximum of 3 minutes and then allow to cool between each use.
• D
o not toast bread in slots and use warming rack at the same time.
• D
o not use if dropped, cracked or damaged.
• A
ccessible surfaces of the toaster may get hot during use. Therefore use handles or knobs.
• D
o not use scouring pad or abrasive cleaner on the toaster body.
• T
he use of accessory attachments not recommended by Dualit may result in fire, electric shock or injury to persons.
SAVE THESE
INSTRUCTIONS
In the interest of improving products, Dualit Ltd. reserves the right to change the product specification without prior notice.
A
ccessible surfaces of the toaster may get hot during use.
Therefore use handles or knobs.
5
INSTRUCTIONS ON
ENVIRONMENT PROTECTION
D
o not dispose this product in the usual household garbage at the end of its life cycle. Please hand it over to a collection point for the recycling of electrical and electronic appliances. The symbol on the product, the instruction of use or the packaging will inform you about the methods of disposal.
The materials are recyclable as mentioned on its marking. By recycling, material recycling or other forms of re-utilization of old appliances you are making an important contribution to protect our environment. Please enquire at the community administration for the authorised disposal location.
IMPORTANT: BEFORE
FIRST USE
• R
ead this instruction manual before you start using the toaster. It gives you important safety information and will ensure you get the most out of your Dualit toaster.
• K
eep this manual and your proof of purchase in a safe place.
• B
efore you use your toaster for the first time, wash all parts according to the cleaning instructions.
• P
osition the toaster according to the safety precautions and setting up on page 6.
• Y
our Dualit toaster has patented ProHeat elements. These elements need to be conditioned before toasting for the very first time. Then continue to toast as per the instructions.
• T
o condition elements for use, let the toaster complete the first cycle without slices of bread in it and allow to cool to room temperature.
Some smoke may vent from the slots, this is not a fault and is perfectly safe. There may be a slight popping crinkling sound, this is due to heat expansion of the elements and is perfectly normal. Allow to cool to room temperature.
Your toaster is now conditioned and ready for use.
DON’T FORGET
TO REGISTER
YOUR PRODUCT
WWW.DUALIT.COM/REGISTER
OR BY POST
SETTING UP
Read and follow these instructions before using your toaster.
THIS IS AN ATTENDED APPLIANCE.
Do not leave unattended during use, unplug after each use
(risk of fire if an unattended appliance is left operating).
1 2 3
U
PL
U
G
WH
EN NO
T IN
U
7 THE CRUMB TRAY CONTINUED 8 UNPLUG
Register your product at dualit.com
. This will only take 60 seconds. You will need the product model and serial number that are on the rating label on the base of the product.
4
DO NOT STORE OR
USE YOUR TOASTER
IN AN APPLIANCE
GARAGE OR UNDER
CUPBOARDS.
A fire may occur if incorrectly positioned.
5 ADJUST FOR
UNEVEN SURFACES
DO NOT STORE OR
USE YOUR TOASTER
CLOSE TO CURTAINS
OR FLAMMABLE
MATERIAL. A fire may occur if incorrectly positioned.
6 THE CRUMB TRAY
20 cm
20 cm
Place the toaster on an open level surface. Ensure the toaster is positioned at least
20CM CLEAR FROM
ANY OVERHANGING
CUPBOARDS, WALLS
OR CEILING AND
BEHIND TOASTER.
Your toaster is fitted with one adjustable foot which may be raised or lowered to compensate for uneven surfaces.
The adjustable foot is located on the base of the toaster and is hexagonal in shape; rotate it to
CRUMB TRAY MUST
BE IN PLACE DURING
TOASTING.
Crumbs will accumulate in the crumb tray and could catch fire if the tray is not emptied frequently. Pull out the crumb tray and wipe clean using a damp cloth. CRUMB TRAY
MUST BE IN PLACE BEFORE TURNING ON THE
TOASTER AND DURING TOASTING.
UNPLUG WHEN NOT
IN USE.
TOASTING TIPS
Here are a few tips to help get the best out of your toaster.
U
PL
U
G
WH
EN NO
T IN
U
• Your toaster is fitted with a mechanical timer, please note this is not a conventional browning setting. Our Peek & Pop ® feature allows you to check the progress of your toast at any time by pushing down on the ejector knob.
• FULLY LOAD ALL HEATED UP SLOTS.
If a slot is heated but no bread is inserted, the bread in the adjacent slot will toast unevenly.
• ALWAYS LOAD YOUR SLOTS STARTING FROM THE LEFT.
• DIFFERENT BREADS WILL TOAST AT DIFFERENT RATES, wholemeal bread takes longer than white bread, fresh bread will take longer than day old bread, sweet bread will toast quicker than white bread. Remember to adjust your timer to allow for your particular type of bread.
• After the first round of toast, the elements and toaster body will be at full operating temperature, subsequent rounds will take less time to toast.
• The thickest slice of bread that will fit in your toaster is 28mm thick. Forcing bread which is too thick or too long into the slots will be difficult to eject once toasted.
• You may find it easier to use a ‘sandwich cage’ to toast smaller items. Inserting, checking and removing will all be easier (sold separately).
• When hand cutting a fresh loaf, cut the slices as evenly as possible. Uneven slices will toast unevenly.
• Keep elements free from breadcrumbs and broken pieces of bread. If left these may burn out the elements. With the toaster unplugged use a soft brush to clean inside your toaster, do not use a knife!
• To reheat recently made toast set timer to ‘defrost’ symbol.
• Cancel toasting manually at any time by rotating the timer back to ‘O’. This will not damage your timer.
7
KNOW YOUR TOASTER
Unpack the box with care, keeping all the packaging materials until you are satisfied everything is present and in working order.
Once satisfied remove any tags from the toaster body and recycle the packaging appropriately. Do not remove tags from the cord. You may wish to keep the box to store your appliance.
All illustrations are for representation only, your model may vary from illustrations shown.
PROHEAT
ELEMENTS
Patented heavy duty replaceable elements.
STAINLESS STEEL
COVER
MANUAL EJECTOR
Mechanical Peek & Pop ejector for greater toasting control.
CRUMB TRAY
Keeps your work surfaces clear of crumbs.
8
WIDE SLOTS
Wide slots to fit thick bread, buns and sandwich cages.
ALUMINIUM CASTINGS
Heavy duty cast aluminium castings.
SELECTOR SWITCH
Select number of slices or buns you are toasting.
2 SLOT MODEL 4 SLOT MODEL
UNPL
FIR UG
E
R
A
IS
K
FT
R
E
U
9
POWER NEON
Illuminates when power on.
MECHANICAL TIMER
WITH DEFROST
Timer controlled defrost and toasting.
FEET
Compensate for uneven surfaces.
ACCESSORIES
- SOLD SEPARATELY
THE SANDWICH CAGE
Convert your toaster into a toasted sandwich maker with this quick and easy to use accessory.
Using a cage also offers greater toasting control, for toasting smaller items such as crumpets, scones, teacakes or muffins.
THE WARMING RACK
The ‘warming rack’ is a universal accessory for all Dualit
Classic Toasters.
Perfect for warming or lightly toasting any bread product that will not fit inside the slots. Such as croissants, scones, pastries or tortillas.
Use for a maximum of 3 minutes and then allow to cool between each use.
Do not toast bread in slots and use warming rack at the same time.
DO NOT PUT A PAN ON TOP OF THE
WARMING RACK.
NOTE: Be mindful that repeated use of the Warming Rack without allowing the toaster to fully cool between cycles may cause the Thermal Protection Device to activate (see page
17)
10
ACTIVE
ELEMENT
THE SELECTOR
ONLY HEAT UP SLOTS YOU ARE GOING TO USE.
This avoids uneven toasting and saves energy at the same time.
1 ONE SLICE 2 TWO SLICE
ACTIVE
ELEMENT
3
THREE SLICE
ACTIVE
ELEMENT
ACTIVE
ELEMENT
ACTIVE
ELEMENT ACTIVE
ELEMENT
ACTIVE
ELEMENT
2 & 4 slot models: Select the one slice indicator on the ‘selector switch’. The left hand slot will heat up on both sides.
2 & 4 slot models: Select the two slice indicator. The two slots from the left will toast on both sides.
4
FOUR SLICE
5
ONE BAGEL
ACTIVE
ELEMENT
4 slot model: Select the three slice indicator. The three slots from the left will toast on both sides.
6
ACTIVE
ELEMENTS
TWO BAGEL
ACTIVE
ELEMENTS
ACTIVE
ELEMENT
ACTIVE
ELEMENT
4 slot model: Select the four slice indicator. The four slots from the left will heat up on both sides.
2 & 4 slot models: Select the one bagel symbol. Only the second element from the left will heat up.
ACTIVE
ELEMENTS
4 slot models: Select the two bagel symbol. Only the second and fourth element from the left will heat up.
11
ACTIVE
ELEMENTS
ACTIVE
ELEMENTS
ACTIVE
ELEMENT
ACTIVE
ELEMENT
ACTIVE
ELEMENTS
ER
FT
RI
E
UG
FIR
PL UN
TOASTING BREAD
THIS IS AN ATTENDED APPLIANCE. Do not leave unattended during use, unplug after each use (risk of fire if an unattended appliance is left operating).
1 PLUG IN 2 SET
U
PL
U
G
WH
EN NO
T IN
U
CIRCLE
INDICATOR
E
E
FT
RE
UG
FI
PL
UN
3 PEEK & POP 4 STOP TOASTING
TOASTING TIME
REDUCE
TOASTING TIME
5 EJECT
ER
SK
FT
RI
E
UG
FIR
PL UN
TIMER
The toaster will only engage when the power is switched on. Plug the toaster into the wall power socket and turn power on at socket.
Note: The required toasting time is affected by the freshness, thickness and type of bread. Reduce the toasting time if the toaster is warm from a previous toasting opertaion.
See chart below for a guide to toasting different bread types.
For a quick start, turn the timer to the Circle Indicator
(just past the number 2 setting). This is the optimised toasting setting for medium sliced, white bread using a cold toaster.
For repeated toasting or when the toaster is warm, reduce the toasting time for best results.
REDUCE TOASTING TIME
(2 - * )
SETTING
Circle Indicator
INCREASE TOASTING TIME
(2 - 3)
5+ days old 2 days old
0 days old
(freshly baked)
FRESHNESS
(age) of bread
MOISTURE
CONTENT of bread
COLOUR of bread
INGREDIENTS in bread
Dry
—
Sweet
Average
White
12
Savoury
Brown
Moist
Rye
Lots of seeds & savoury
Check the progress of your toast at any time by pushing down on the ‘ejector knob’.
If you remove your toast before the cycle is complete, cancel timer and unplug.
U
PL
U
G
WH
EN NO
T IN
U
The ‘timer’ will click off to ‘O’ position. To cancel toasting manually rotate the ‘timer’ to
‘O’.
If neon light remains illuminated after use immediately isolate the toaster & call service centre.
The toast will not pop up, but will keep warm inside the toaster. Press down the
‘ejector knob’ and the toast will pop up ready for serving.
TOAST
13
ER
FT
RI
E
UG
FIR
PL UN
FT
RI
E
UG
FIR
PL
UN
TOAST
TOAST
E
E
E
FT
RE
UG
FI
PL
UN
FT
RE
UG
FI
PL
UN
TOAST
IN
IN
IN
IN
SE
E
FT
ER U
G
OUTSIDE
OUTSIDE
OUTSIDE
OUTSIDE
OUTSIDE
OUTSIDE
TOASTING FROZEN BREAD
Toast bread directly from the freezer with this handy setting.
U
PL
U
G
WH
EN NO
T IN
U
1 SELECTOR
SE
ER U
E
FT
G
2 DEFROST
SE
ER U
E
FT
G
3 WAIT
SE
ER U
E
FT
G
MAKING TOASTED SANDWICHES
The sandwich cage accessory (sold seperately) will transform your toaster into a versatile sandwich toaster.
1 BUTTER BREAD 2 CREATE 3 INSERT
SE
K
ER
IS
FT
E R
G A
FIR
PLU
UN
SE
K
ER
IS
FT
E R
G A
FIR
PLU
UN
SE
K
ER
IS
FT
E R
G A
FIR
PLU
UN
Set the ‘selector switch’ to the desired number slots you require and insert your frozen slices of bread.
Rotate the ‘timer’ to the defrost symbol and let the timer wind down to ‘0’.
When the timer stops wait
20 seconds.
4 READY 5 AFTER DEFROSTED
Your bread will now be defrosted and ready for toasting.
ER
SK
FT
RI
E
UG
FIR
PL UN
SE
K
ER
IS
FT
E R
G A
FIR
PLU
UN
E
E
FT R
A RE
FI
Set the timer to your preferred setting and continue to toast as if toasting fresh bread.
PL
14
Use medium sliced bread, lightly butter the OUTSIDE
OF EACH SLICE.
TOAST
Place your fillings between the unbuttered sides.
DO NOT OVERFILL
THE SANDWICH.
Place sandwich in cage.
TOAST
Set ‘selector’ and starting from the left insert cage into the slots. Push down until clamped tightly shut.
5 REST 6 SERVE
U
PL
U
G
WH
EN NO
T IN
4 TOAST
T
E
R
U
SE
IS
K
N
U
T
E
R
U
IS
SE
K
P
N
U
Toast until the sandwich is golden. Setting 3 on the
‘timer’. Adjust for your bread type.
Allow to rest for a further minute inside the toaster to allow fillings to fully warm.
If neon light remains illuminated after use immediately isolate the toaster & call the service centre.
Remove, cut and serve.
CAUTION:
FILLINGS CAN
BE HOT.
TOAST
IN
TOAST
TOAST
TOAST
TOAST
TOAST
TOAST
ACTIVE
ELEMENT
CLEANING & CARE
IMPORTANT: ensure the toaster is isolated and allowed to fully cool before starting to clean. Any other servicing should be performed by an authorized service representative.
1 THE COVER
U
PL
U
G
WH
EN NO
T IN
U
2 THE CASTINGS
AFTER EACH USE
Wipe the ‘stainless steel cover’ with a non-abrasive cloth. A stainless steel cleaner can be used to restore shine to the cover only, but do not use an aggressive cleaner or one that contains ammonia.
Wipe the aluminium end castings with a damp cloth. Do not use a chemical or abrasive cleaner.
3 THE CRUMB TRAY 4 THE INTERNALS
THERMAL PROTECTION DEVICE
TO PREVENT
ACTIVATING THE
THERMAL
PROTECTION
DEVICE:
• Ensure your toaster is situated in an area with at least 10cm of space to the left, right and back of the toaster.
• Use the toaster clear of overhanging cupboards and away from any flammable materials.
1 2
Always load bread into the toaster starting from the left hand slot.
Always use the appropriate setting for the number of slices of bread to be toasted.
3 FURTHER ROUNDS
2 nd
3 rd
4 WARMING RACK 5 UNPLUG
Crumbs will accumulate in the crumb tray and could catch fire if the tray is not emptied frequently.
Pull out the crumb tray and wipe clean using a damp cloth. CRUMB
TRAY MUST BE IN PLACE
DURING TOASTING.
With the toaster unplugged from the power supply use a SOFT BRUSH to clean inside your toaster, do not use a sharp or metal utensil! Crumbs should be carefully brushed off the elements using only a soft brush, the toaster can be turned upside down and excess crumbs be shaken out.
16
ER
SK
FT
RI
A
E
UG
FIR
PL UN
Be mindful of reducing the toasting time if the toaster is already warm from previous use, as the bread toasts faster on 2nd and 3rd cycles.
Be mindful that repeated use of the Warming Rack without allowing the toaster to fully cool between cycles may cause the device to activate.
17
Always unplug the toaster after use.
ACTIVE
ELEMENT
ACTIVE
ELEMENTS
RESETTING THERMAL FUSE
If the toaster neon illuminates, but the elements fail to warm up or if there is an audible
‘click’ above the normal ticking of the timer from the toaster while it is still operating, you may have activated the Thermal Protection Device.
Before resetting you must ensure that there is not a fault within the appliance. Do not reset unless a qualified electrician has examined the toaster and verified that the Selector Switch,
Timer and all other Components are in good working order.
The Thermal Protection Device can be reset by allowing the toaster to fully cool, unplugging the toaster from the wall socket and following instructions below.
Resetting the Thermal Protection Device should only be carried out by a qualified electrician. The toaster must be Portable Appliance Tested following reset of the
Thermal Protection Device. Should you require any further assistance call Dualit’s Service
Department on 01293 652 500.
2 3 1
U
PL
U
G
WH
EN NO
T IN
U
Unplug the toaster and allow to fully cool.
4
Remove the crumb tray and toaster base plate to access the fuse.
5
The fuse can be located in the rear corner of the toaster body.
6
PAT
TEST
The fuse is reset by depressing the small white button on its face.
Refix the base plate and return the crumb tray.
18
The appliance must be
Portable Appliance Tested before use.
REPLACEMENT PARTS
The Classic toaster is also kind on the environment, all parts are repairable or replaceable. You don’t throw away a Dualit Classic toaster, for a nominal cost we fix it for you!
Dualit repairs department regularly receive toasters over 40 years old. They are fixed and go back to the owner in full working order. If your toaster needs a repair, simply contact our helpline on 01293 652 500 for repair or servicing advice or visit www.dualit.com/support.
ALL SERVICING MUST BE CARRIED OUT BY A QUALIFIED ELECTRICIAN
OR REPAIRER.
For your own protection only use original Dualit spares in your toaster.
• Fitting of non Dualit parts will invalidate the guarantee.
ELEMENT SPARES
• When replacing ProHeat elements, only use genuine Dualit elements
(stamped “DUALIT”).
• The safety and the performance of the toaster cannot be guaranteed if inferior
elements are used.
TIMER SPARES
• When replacing the timer, only use a genuine Dualit timer.
• The safety and the performance of the toaster cannot be guaranteed if an inferior timer
is used.
DON’T FORGET
TO REGISTER
YOUR PRODUCT
WWW.DUALIT.COM/REGISTER
OR BY POST
19
REPLACING ELEMENTS
ALL SERVICING MUST BE CARRIED OUT BY A
QUALIFIED ELECTRICIAN OR REPAIRER & PORTABLE
APPLIANCE TESTED.
1
DUALIT
2
2-END
3
U
PL
U
G
WH
EN NO
T IN
U
6M
6MM
6MM
M
6M
6MM
6MM
6M
6MM
Unplug and place toaster on a soft cloth. Remove crumb tray and unscrew feet to remove the base plate.
4
Loosen locking nuts on retaining plate using a
6.5mm spanner and slide back. Ensure that the retaining plate is correctly in position when reassembling.
5
DUALIT
Unscrew brass links and wires.
2-END
DUALIT
DUALIT
2-END
2-END
DUALIT
6M
2-END
Bend brass links and wires away from the element.
Remove element. To reassemble, reverse procedure ensuring wires and parts are correctly positioned. Ensure new element is marked the same as the one removed.
The element heats on both sides and can be inserted facing either way. Check it is seated correctly in the channels either side. Portable Appliance Tested before use.
20
TROUBLESHOOTING
SOLUTION(S) POSSIBLE CAUSE(S)
MY TOASTER IS NOT WORKING
1. The toaster may not be properly connected to the power supply.
2. Your fuse or Thermal Protection
Device may have blown, or the timer may need replacing.
I GET UNEVEN TOASTING
6M 1. Different bread types and sizes have been used at the same time.
2. End elements take a little longer to warm up than centre elements.
1. Check the toaster is plugged in.
TO REPLACE FUSE,
REMOVE SILVER LABEL
TO ACCESS SCREW.
2. Check if the light is glowing red.
If yes, unplug the toaster and call service centre
If no, your plug fuse may have blown.
1. Ensure size and type of bread being toasted are the same.
2.1 Preheat the slots before inserting bread by rotating the timer all the way round, let it wind down to the circle indicator then insert your bread into the active slots.
2.2 Ensure all active slots have bread inserted when toasting.
2.3 Once toaster is at optimum operating temperature this will no longer occur.
3. All active slots do not contain bread.
3. Check the selector switch is set for the number of slots being used.
4. If the timer is noticeably slow, it may need replacing.
4. Unplug and do not use the toaster. Spare timers are available from www.dualit.com and must be fitted by a qualified electrical engineer.
ONE SIDE OF MY BREAD IS NOT TOASTING
1. Elements heat up on both sides. The
‘selector’ switch may not be set correctly.
1. Check the ‘selector’ switch is set correctly. Remember to insert bread from the very left hand slot.
2. One or more of the elements may need replacing.
2. Call the helpline or visit www.dualit.com for replacement elements.
SMOKE COMING OUT OF THE SLOTS
1. If this is the first time using your toaster, this is normal, your elements are being conditioned.
1. This will dissipate after a few uses.
2. The crumb tray might be full. A build up of crumbs can burn or cause a fire.
3. Some crumbs or pieces of bread may be stuck in the toaster.
2. Empty the crumb tray.
3. Unplug, remove the crumb tray then turn the toaster upside down over a sink or bin and gently shake the crumbs out.
MY TIMER IS NOTICEABLY SLOW OR STICKING
1. Your timer will need replacing.
1. Unplug and do not use the toaster. Repair the timer immediately. Spare timers are available from www.dualit.com and must be fitted by a qualified electrical engineer.
21
DON’T FORGET TO
REGISTER YOUR PRODUCT
Take a minute to register your product with us to receive these outstanding benefits:
1
Fast and efficient customer service important safety advice, access to manuals and product information should you require assistance with your purchase.
3
Be the first to hear about exciting new Dualit products.
2
A library of mouth-watering recipes and regular articles and blogs.
Dualit recommends safety first : please register your product so that we can contact you in the unlikely event that a safety notification is issued.
Remember to keep your receipt as proof of purchase.
WWW.DUALIT.COM/REGISTER
GUARANTEE
This appliance is of excellent quality and construction. However, if any defects in materials or workmanship do appear during the relevant guarantee period, we will, at our discretion, either repair or replace the defective parts, free of charge, subject to the terms and conditions of our
Guarantee shown below.
This Guarantee covers both parts and labour.
Carriage is not included.
Your Guarantee period is as follows:
• 1 year
This Guarantee provides benefits which are additional to, and do not affect, your statutory rights. This Guarantee does not cover the cost of returning the product to the dealer from whom it was purchased or to ourselves. This Guarantee applies only to products sold and located in mainland Great
Britain. It does not cover liability in respect of or replacement of plugs, cables or fuses and also does not cover defects due to:
• Failure to use or maintain product in
accordance with Dualit’s instructions.
• The product being connected to an
unsuitable electricity supply.
• Accidental damage to or abuse or misuse
of the product.
• Product modification, except by Dualit or
approved agent.
• Dismantling of or interference with the
product.
• Theft or attempted theft of the product.
Before returning any product under this
Guarantee, please check that:
• You have followed the product instructions
correctly.
• Your mains electricity supply is functional.
• The defect is not due to a blown fuse.
If you wish to claim under this guarantee you should:
• Send the product, postage or carriage paid,
to the dealer from whom it was purchased
or to Dualit direct.
• Ensure that the product is clean and
packed carefully (preferably in its original
carton).
• Enclose details of your name, address and
telephone number and when and where
the product was purchased, together with
proof of purchase (e.g. a till receipt).
• Give exact details of the nature of the
defect.
This Guarantee does not cover any other claims whatsoever, including, without limitation, any liability for incidental, indirect or consequential damage, nor does it cover any claims for conversion or modification or for the costs of repair carried out by any third party without the prior consent of
Dualit. If replacement parts are fitted to the product this will not extend the period of the Guarantee.
For further advice contact the Dualit customer helpline on +44 (0)1293 652 500
(09:00 to 17:00 Monday to Friday).
Alternatively, email Dualit at [email protected] or visit www.dualit.com
Do not throw away the appliance with the normal household waste at the end of its life, but hand it in to an official collection point for recycling. By doing this you help preserve the environment.
23 22
K E T T L E
The Classic Kettle combines the latest patented innovations with quality and attention to detail to add a stylish
DON’T FORGET TO
REGISTER YOUR TOASTER
WWW.DUALIT.COM/REGISTER
OR BY POST
Dualit Limited County Oak Way Crawley West Sussex RH11 7ST
+44(0)1293 652 500 [email protected] www.dualit.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement