Hall Technologies EMCEE200 Owner's Manual

EMCEE200

PRESENTATION SWITCHER

USER’S MANUAL

CAPTURE TO

STREAM IN 4K

RECORD TO

EXTERNAL

STORAGE DEVICE

DEDICATED

CONFIDENCE AND

PRESENTATION

MONITOR OUTPUT

CUSTOM

MULTIVIEW

LAYOUT

DUAL

MIC MIXER

SEAMLESS

SWITCHING

800-959-6439 halltechav.com

2

EMCEE200

Table of Contents

Contacting Hall Technologies

Warranty and Repairs

Safety and Certification

Revision History

1.0 Introduction

Applications

Features

2.0 Package Contents

Model EMCEE200

3.0 Connector and Indicator Functions

Front Panel

Front Panel (continued)

Rear Panel

Rear Panel (continued)

4.0 Setup

Installation Recommendations

EMCEE Output Cards

HDBaseT™ Transmitter Output Card Installation (EXP-HDBT3-TRX100)

Audio Amplifier Output Card Installation (EXP-AMP-4860)

Connecting Multiple Speakers to the Audio Amp

5.0 Configuration and Operation

Introduction to Window-Based Switching

Mirrored Window Layouts (Mode 1)

Independent Window Layouts (Mode 2)

Routing Audio – Input Tie or Window Tie

Creating and Recalling Presets

6.0 Recording and Live Capture

USB Recording to Storage Device

USB Capture Streaming – Soft Codec

Live-Streaming Considerations

7.0 Control

RS-232 / Telnet / TCP Control

Web GUI Control

IR Remote Control

8.0 Troubleshooting

Firmeware Updates

9.0 Specifications

21

21

22

22-29

19

19

20

20

30

31

32

33

34

16

16

17

18

13

13

14

15

10

11

12

12

8

8

7

7

9

6

6

5

6

3

3

4

© Copyright 2021 Hall Technologies, LLC

EMCEE200

Contacting Hall Technologies

Thank you for purchasing this product from Hall Technologies. We hope you like it. If you ever need to contact us with a sales, marketing, or technical support question or concern, we invite you to reach out to us via phone, e-mail, or online.

Sales and Customer Support Hours

Monday – Friday 7:00 A.M. – 4:00 P.M. (PST)

Toll Free: 800-959-6439 or US: 714-641-6607

Sales:

Support:

Online: [email protected]

[email protected]

https://halltechav.com/Contact/

Corporate Headquarters

1234 Lakeshore Drive

Coppell, TX 75019 https://halltechav.com

Warranty and Repairs

Warranty: Product warranty and repair information can be found at https://halltechav.com/warranty/

If you determine that your product is malfunctioning, do not attempt to repair the unit. Contact Hall

Technologies support by phone or online. Products to be returned must first receive a Return

Authorization (RMA) number issued by our support department. To aid in this process, we will need you to provide the serial number of the affected product to determine warranty status, as well as a description of the problem, and any troubleshooting steps performed.

© 2021 Hall Technologies. All rights reserved. “Hall Technologies”, “Hall Tech AV,” and the Hall

Technologies logo are trademarks or registered trademarks of Hall Technologies LLC in the United

States and/or other countries. All other trademarks, registered trademarks, or trade names used in this document are the sole property of their respective owners. Hall Technologies is not responsible for errors in typography or photography. Pricing, availability, and specifications are subject to change without notice.

© Copyright 2021 Hall Technologies, LLC 3

4

EMCEE200

Safety and Certification

1. Please read and follow all instructions prior to use.

2. Do not use this product near water. Do not expose to rain or moisture.

Clean only with a dry cloth.

3. Do not block ventilation openings, or operate in extreme environments. Follow product

specifications for storage and operation temperatures.

4. Do not open or modify this product. There are no user serviceable parts inside. Opening the

product without written authorization from Hall Technologies will void the warranty.

5. Do not modify the power supply, or defeat the safety features of polarized “two-prong” or

grounding-type “three-prong” plugs. Polarized plugs have two blades, one wider than the other.

Grounding plugs have an additional third grounding prong. These features are provided for your

safety. If your outlet is not compatible with the provided plug, please consult a licensed electrician

to replace the outlet.

6. Do not use power cords, cables, or accessories that are visibly damaged, pinched, flattened

kinked, or frayed. Keep all cables and accessories free from walkways, doorways, or other areas

that may cause damage or present a tripping hazard.

7. Use only power supplies and accessories specified by Hall Technologies. Refer all servicing to

qualified service personnel.

FCC Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference even if it causes undesired operation.

This equipment has been desinged to comply with the limits for a Class A digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at their own expense. ©


Revision History

Version

1.0

Release Date

07/16/2021

Notes

Initial Release

EMCEE200


EMCEE200

1.0 INTRODUCTION

EMCEE200 is a seamless multi-view presentation switcher and scaler with Picture-in-Picture (PIP) and

Picture-Over-Picture (POP) capabilities. It can process up to four 4K@60hz video sources simultaneously and gives “CONFIDENCE” and “PRESENT” HDMI outputs in different window layouts.

With a built-in dual MIC mixer and a wide range of Audio Embedding and De-Embedding options,

EMCEE200 is a perfect companion for any type of presentation. EMCEE200 can not only record the presentation to an external storage device but also provides USB3.0 4K Capture for live streaming.

6

Applications

• Distance Learning and

Hybrid Classrooms

• Conference rooms

• Lecture Recording

• Live Streaming

Hybrid Learning Classroom

Features

• 18G multiview presentation switcher and scaler

• Customizable multiview layouts, including

Picture-In-Picture (PIP) and Picture-Over-Picture (POP)

• 4K@60 4:4:4 on all Inputs and Outputs

• Record and save to an external storage device

• USB 3.0 capture to stream in 4K

• Dual MIC Mixer with Audio Embedding and De-Embedding

• Matrix Confidence and Present Outputs

• Control via Web GUI, IR, RS-232, TCP/IP, and Telnet

• Optional HDBaseT™ 3.0 and 40-watt Audio Amplifier plugin modules available


2.0 PACKAGE CONTENTS

Model EMCEE200

1x Model EMCEE200

1x Power Supply - 24V DC 5A with IEC AC cord

2x 3-pin Terminal Blocks

1x 5-pin Terminal Block

4x Rubber Protective Feet

2x 19” Rack / Surface Mount Brackets

1x IR Remote Control

1x IR Receiver Extension Cable

1x Manual Instruction Card

EMCEE200


EMCEE200

3.0 CONNECTOR AND INDICATOR FUNCTIONS

Front Panel

1 2 3 4 5

8

1) WINDOW: Up to four video windows can be processed and output to “CONFIDENCE” and

“PRESENT” outputs. Configurations may be 1 x1, 2 x 1, 1 x 2, 2 x 2, 3 x 1, 1 x 3, or a mirrored “quad view”. These window arrangements may be configured through the MENU, or via the Web GUI.

a. To change the video source for a window, select the corresponding WINDOW button.

b. There is a 5-second timeout to make a selection, during which the selected WINDOW button wll be blinking.

c. The current INPUT source LED will be lit. Select the new desired input.

d. INPUT LED will blink once to confirm

2) INPUT: EMCEE200 supports up to four HDMI Inputs, at resolutions from 480p up to UHD 4K @

60Hz, 4:4:4. Input selections are changed by first selecting the corresponding WINDOW, and then the new desired INPUT.

3) PRESETS: Up to four presets can be saved and recalled, to quickly switch between configurations without having to use the OSD MENU or Web GUI.

a. To SAVE a preset, press and hold the desired PRESET button for three seconds. The LED will blink once to confirm.

b. To RECALL a preset, press the desired PRESET button. The LED will blink once to confirm.

4) IR WINDOW: IR Receiver window. Ensure this area is not obstructed if using the IR remote.

5) VOLUME: Master volume control for both HDMI outputs and the optional amplified audio output.

Rotate to adjust volume. Press the VOLUME knob to toggle mute/unmute.


Front Panel (continued)

6 7 8 9 10

EMCEE200

6) MICROPHONE (MIC): Adjust volume of MIC1 and MIC2.

a. Press MIC1 or MIC2 button to select microphone to adjust. Button LED indicates current selection.

b. Rotate to adjust volume. Press the MIC volume knob to toggle mute/unmute of selected microphone (MIC1 or MIC2)

7) MENU: Press MENU to open the OSD menu.

a. Use MENU to select the current menu item, or apply the new setting.

b. Use RIGHT to navigate into a menu item.

c. Use LEFT to navigate back from a menu item.

d. Use UP/DOWN to navigate up/down the menu items, or increase/decrease the current menu item parameter.

8) PRESENT: Press to enable/disable the PRESENT output. LED is ON while presenting.

9) RECORD (REC): Press to start/stop recording to an external USB drive. LED is ON when recording and OFF when not recording. LED will blink three times if an error is encountered.

a. After plugging into the USB drive, the REC LED will blink once when it is ready to record.

b. After recording is finished, the REC LED will blink continuously until it has finished writing the data to the USB drive.

10) USB: USB 2.0 port for connecting to an external Storage Device. The USB drive must be

formatted as a FAT32 partition.

a. Recorded files are saved as .mp4.

b. File name is saved as record_(serial number).mp4. Resolution is fixed at 1080p@60Hz.

i. Serial number starts at 0, 1, 2… ii. The name and serial number reset when power is cycled.

c. Approximately 6GB of storage is needed to record for one hour.

d. NO HDCP record support. See “HDCP NOTICE” in Section 6 of this manual.


EMCEE200

HDCP Notice

In order to comply with applicable laws, HDCP protected content will not be recorded. A message will be shown in the top left of the screen to indicate the presence of HDCP. Some computer manufacturers insert content protection when available, regardless of the content being displayed. In order to record non-HDCP video from these sources, the EMCEE200 will need to be told to turn off support for HDCP on that input. This does NOT strip HDCP from protected content, but allows non-HDCP video to be recorded, such as the computer desktop, applications, etc. The computer will be unable to play HDCP protected content until HDCP support is re-enabled. HDCP support can be enabled or disabled via the OSD MENU,

Web, GUI, RS-232, or Telnet.

Rear Panel

1 2 3 4

10

1) AUDIO EMBEDDING: The EMCEE200 can embed audio from one of the HDMI Inputs, or from one of the external line-level audio inputs.

a. TOSLINK: Digital audio input via optical TOSLINK cable.

b. STEREO: Analog L/R audio input via 3.5mm cable.

2) MIC EMBEDDING: Two microphone inputs can be mixed and embedded into the HDMI output.

a. MIC 1: Mic-level input via 3.5mm cable.

b. MIC 2: Selectable between mic-level with 48V phantom power, or line-level. Input via 3-pin terminal block.

3) HDMI INPUTS: Up to four HDMI Inputs, at resolutions from 480p up to UHD 4K@60Hz, 4:4:4.

4) AUDIO OUTPUT: The selected audio source and embedded mic mix can be de-embedded for connection to an external audio system if needed.

a. TOSLINK: Digital audio output via optical TOSLINK cable.

b. STEREO: Analog L/R audio output via 3.5mm cable.

c. L/R Balanced: Analog L/R balanced audio output via 5-pin terminal block.


Rear Panel (continued)

5 6

EMCEE200

7 8 9 10

5) CONFIDENCE (EXPANSION 1): HDMI Output. This output is primarily intended for the presenter’s convenience.

a. Output is active when the “PRESENT” output is blanked.

b. An EMCEE Output Card plugged into “EXPANSION 1” will mirror the same audio and video as the “CONFIDENCE” output.

6) PRESENT (EXPANSION 2): HDMI Output. This output is primarily intended for the presenter’s audience.

a. Output can be blanked by using the “PRESENT” button on the front panel.

b. An EMCEE200 Output Card plugged into “EXPANSION 2” will mirror the same audio and video as the “PRESENT” output.

7) RS-232: RS-232 port for 3 rd party control via a 3-pin terminal block. See the CONTROL section of this manual for configuration and a list of available RS-232 control commands.

8) CAPTURE: USB 3.0 port for soft-code video and audio capture. Connect to a computer to stream the “PRESENT” output in real-time.

a. Supports resolutions up to 4K30.

b. No drivers needed - EMCEE200 identifies as a camera device.

c. NO HDCP capture support. See “HDCP NOTICE” above.

9) IP: RJ45 port for 3 rd party control via connection to a LAN. See the CONTROL section of this manual for configuration and a list of available TELNET control commands.

10) 24V DC POWER: Power input. Use only supplied power adapter that comes with the system.


12

EMCEE200

4.0 SETUP

Installation Recommendations

• The EMCEE200 includes standard 19” rack mounting ears. Alternatively, these ears can be turned

90° and installed in the middle of the EMCEE200, to provide secure surface for under-table mounting

options.

• Keep the EMCEE200 away from heat sources and ensure adequate ventilation. Do not block any

ventilation holes.

• Do NOT add or remove Output Cards without first removing power from the EMCEE200.

• Connect the HDMI Inputs and Outputs using good quality cables.

• Hall Technologies carries a line of SnugFit™ HDMI cables that provide a secure and reliable

connection: https://halltechav.com/product/chd-sf/

• The power supply uses a locking DC power connector to prevent accidental power loss. The

connector should only be finger-tight; do not over tighten.

• The power supply must be connected to a properly grounded outlet.

• Test all accessories such as extension cables prior to installation in a wall or plenum space.

• If using the HDBaseT™ expansion card, use quality CAT6A cable or better. Shielded cable is

recommended to improve performance in noisy environments.

• Route all cables away from high voltage sources such as lighting ballasts, transformers, motors, or

AC lines. Where crossing is required, run cables perpendicular to one another to reduce signal

inductance.

• Firmware updates may be available with future updates to add features or to improve

performance. These updates will be available on the product page of the website: https://halltechav.com/product/emcee200/


EMCEE200

EMCEE200 Output Cards

EMCEE output cards are separate plug-in modules that are designed for use with the EMCEE200 to provide additional functionality. The EMCEE200 has two available expansion outputs, which can provide additional video or audio output.

• EXPANSION 1 : This port will mirror the same audio and video as the “CONFIDENCE” output.

• EXPANSION 2 : This port will mirror the same audio and video as the “PRESENT” output.

HDBaseT™ Transmitter Output Card Installation (EXP-HDBT3-TRX100)

The EMCEE200 can be outfitted with an HDBaseT™ expansion card to extend HDMI up to 90m (295ft) at 4K@60Hz 4:4:4 over a single CAT6A cable to a compatible HDBT3 receiver. USB 2.0, RS-232, and bi-directional IR are also extended to the receiver.

ALWAYS remove power from the EMCEE200 before installing or removing expansion cards. Failure to do so may result in damage to the unit and presents a risk of electric shock.

• Remove the faceplate from EXPANSION 1 or EXPANSION 2.

• Ensure all expansion card DIP switches are turned OFF.

• Carefully slide the HDBaseT™ expansion card into the slot. Press firmly to engage with the ard-edge

connector.

• Secure the expansion card by tightening the faceplate screws.

Two HDBaseT™ expansion cards may be installed in the EMCEE200 to extend both PRESENT and

CONFIDENCE video to remote locations.


14

EMCEE200

Audio Amplifier Output Card Installation (EXP-AMP-4860)

The EMCEE200 can be outfitted with a 40W stereo audio amplifier expansion card for local audio amplification. The audio amplifier supplies 20W per channel at 4 or 8 ohms, in either stereo or combined mono output.

ALWAYS remove power from the EMCEE200 before installing or removing expansion cards. Failure to do so may result in damage to the unit and presents a risk of electric shock.

• Remove the faceplate from EXPANSION 1 or EXPANSION 2.

• Carefully slide the audio amplifier expansion card into the slot. Press firmly to engage with the

card-edge connector.

• Secure the expansion card by tightening the faceplate screws.

Only ONE audio amplifier expansion card may be installed in the EMCEE200. If more audio amplification is needed, an external audio amplifier will be required. Contact Hall Technologies for more information regarding available audio amplifier solutions.


EMCEE200

Connecting Multiple Speakers to the Audio Amp

The EMCEE200 audio amplifier card is designed to drive either 4-ohm or 8-ohm speaker loads, depending on the setting indicated by the DIP switch. Connecting a larger load with less resistance than indicated can result in an over-current shutdown of the amplifier, and possible damage to the card itself. Using a smaller load such as 16 ohms is allowed but will result in less power delivery and a lower overall volume level.

For larger rooms, it may be desirable to have more than two speakers connected to the amplifier.

Multiple speakers can be connected in series or parallel, provided the total load does not exceed the amplifier’s capacity.

For example, when using the 4-ohm setting, each channel may have two 8-ohm speakers connected in parallel, or two 2-ohm speakers connected in series:

LEFT RIGHT

Parallel Wiring: 8 ohms + 8 ohms = 4 ohms load per channel

LEFT RIGHT

Series Wiring: 2 ohms + 2 ohms = 4 ohms load per channel

When using the 8-ohm setting, each channel may have two 16-ohm speakers connected in parallel, or two 4-ohm speakers connected in series.


16

EMCEE200

5.0 CONFIGURATION AND OPERATION

Introduction to Window-Based Switching

Unlike traditional video switchers that employ simple Input Output commands to change video routing, a multiview switcher can display several inputs on the same output.

The EMCEE200’s HDMI inputs are displayed within four available windows, labeled A through D. These windows can be sized and positioned where needed to create custom window layouts. Up to four windows can be displayed simultaneously:

A

B

C

Picture-in-Picture (Window layout 13)

A

C

B

D

Quad View (Window layout 15)

By default, there is a colored border around each Window to aid in identifying its location on the screen.

This can be turned off via the OSD or Web GUI. Additional Window and Input labels are also available if desired.

The video being routed to each Window can be independently changed to display from any Input. From the front panel, this is achieved by pressing one of the WINDOW buttons, followed by the desired

INPUT.

To perform a quick swap of the Inputs between two Windows, Press the first WINDOW button, followed by the second WINDOW button.


EMCEE200

Mirrored Window Layouts (Mode 1)

In Mirrored Mode, both CONFIDENCE and PRESENT outputs are identical – the same audio and video is shown on both displays. A total of 19 default Window Layouts (shown below) are provided as a starting point. In Mode 1, the sizes and positions of each window can be further customized and saved to a preset, using commands available in the OSD, Web GUI, or RS-232/Telnet commands.

A B

WL5

A

C

WL10

B

A B

C

WL15

D

A

WL1

B A

WL6

A

C

WL11

B

B

A

C

WL16

D

B

WL2

B

A

WL7

B

C

A

WL12

B C

A

WL17

D

C

WL3

A

WL8

A

WL13

B

C

A

WL18

B

C

D

B

D

WL4

A

WL9

B

B A

WL14

C

B

C

D

A

WL19

TRANSITION EFFECTS: Switching between the first four Window Layouts allows for the use of Window

Transition Effects, such as Fade and Wipe. These transitions can be adjusted through the OSD or Web

GUI. Please note that these effects are only available when transitions between full-screen window layouts by issuing a “WLn” command, where ‘n’ = 1-4.


18

EMCEE200

Independent Window Layouts (Mode 2)

In Independent Mode, CONFIDENCE and

PRESENT outputs are different. The

EMCEE200 can process a maximum of four

Windows in this mode, shared between the two outputs. In Mode 2, the sizes and positions of the Windows are fixed.

The Independent Mode can be accessed via

Web GUI or RS-232/Telnet commands. Mode and input routing information is saved when a preset is created.

CMD

OUT

WL1

WL2

WL3

Mode 2 Window Layouts

CONFIDENCE PRESENT

A B

A

A

B

B

C

C

WL4

A B C

D

WL5 A B C D

WL6

WL7

WL8

WL9

A

A

B

A

B

B

A B

C

C

D

C

C

D


EMCEE200

Routing Audio – Input Tie or Window Tie

There are two different audio routing modes – Input Tie, or Window Tie. These can be changed to suit the desired operation. This audio routing information is saved when a preset is created.

INPUT TIE: In this mode, the audio is fixed to a specific input. By default, this is normally input 1, but can be switched to any of the four. In this mode, audio from input 1 will always be sent to the outputs, regardless of any changes to video routing. Changes to the audio output must be made manually.

WINDOW TIE: In this mode, the audio follows the video of specific window. By default, this is normally window A, but can be switched to any of the four. In this mode, the audio being sent to the outputs will change automatically if the video routing to window A is changed.

From the front panel, press and hold the desired INPUT button until the LED blinks to tie the audio to the input. Press and hold the desired WINDOW button until the LED blinks to tie the audio to the window. To tie the audio to one of the external audio inputs, please use the OSD, Web GUI, or

RS-232/Telnet commands.

Creating and Recalling Presets

The EMCEE200 can store up to 18 different preset configurations to quickly change between layouts.

The first four are available via the front panel PRESETS buttons. The remaining presets can be saved and recalled through the Web GUI or RS-232/Telnet commands.

From the front panel, press a PRESET button to recall that preset. Press and HOLD a PRESET button until the LED blinks to save the current layout to that preset.

The following information is saved as part of every preset:

• Window layout mode (1 or 2)

• Window layout sizes and positions

• Window input routing

• Audio source and routing mode


EMCEE200

20

6.0 RECORDING AND LIVE CAPTURE

HDCP Notice

To comply with applicable laws, HDCP protected content cannot be recorded or captured by the EMCEE200.

A message will be shown on the screen to indicate the presence of HDCP. Some computer manufacturers insert content protection when available, regardless of the content being displayed.

To record non-HDCP video from these sources, the EMCEE200 will need to be told to turn off support for

HDCP on that input.

This does NOT strip HDCP from protected content, but allows non-HDCP video to be recorded, such as the computer desktop, applications, etc.

The computer will be unable to play HDCP protected content until HDCP support is re-enabled. HDCP support can be enabled or disabled via the OSD MENU, Web GUI, RS-232, or Telnet.

USB Recording to Storage Device

The USB-B port on the front of the EMCEE200 can be used to record the video and audio that is routed to the PRESENT output to an external storage device, such as a USB flash drive. A PC is not required for this functionality. When setting up a storage device, please observe the following:

1. The drive must be formatted FAT32.

2. Recorded files are saved as .mp4. Resolution is fixed at 1080p@60Hz.

3. File name is saved as record_(serial number).mp4

a. Serial number starts at 0, 1, 2…

b. The name and serial number reset when power is cycled.

4. Approximately 6GB of storage is needed to record for one hour.

It is recommended to make a sample recording prior to the presentation to ensure all the settings and levels are correct.

Once the storage device is ready, connect it to the USB port on the front of the EMCEE200.

1. After plugging into the USB drive, the REC LED will blink once when it is ready to record.

2. Press “REC” to start/stop recording to an external USB drive. LED is ON when recording and

OFF when not recording. LED will blink three times if an error is encountered.

3. After recording is finished, the REC LED will blink continuously until it has finished writing the

data to the USB drive.

Do NOT unplug the USB storage device until the EMCEE200 has finished writing, and the REC light is

OFF.


EMCEE200

USB Capture Streaming – Soft Codec

To record video in 4K, or live-stream video for a soft codec presentation, a PC with USB 3.0 is required.

Installation and configuration are as follows:

1. Connect the computer to the USB 3.0 “CAPTURE” port on the back of the EMCEE200.

2. Wait for the computer to install the necessary drivers.

a. The EMCEE200 is recognized and installed as a 4K camera.

b. No extra drivers are required for modern operating systems.

3. Ensure EMCEE200 HDMI output is set to 4K @30Hz (The maximum supported.)

4. Ensure HDCP input and output modes are set to OFF. (See HDCP notice above.)

Live-Streaming Considerations

When using the EMCEE200 to stream video over web-based conference platforms, it is recommended to bring up the camera feed in a separate application such as OBS Studio and to share the application’s screen, rather than using the feed as a camera directly. There are two reasons for this:

1. Many web-based applications will perform a horizontal flip of the user’s camera, so that the

user sees a mirrored image of themselves, while the other users see an unaltered image. This

behavior is not ideal for the presenter, as all images and text will appear flipped and difficult to

read.

2. To save on bandwidth, camera feeds sent through these conferencing platforms are highly

compressed. When a user performs a screen share, more bandwidth is allocated to maximize

the clarity of the shared content, such as diagrams and text.


22

EMCEE200

7.0 CONTROL

RS-232 / Telnet / TCP Control

RS-232 Configuration

Baud

Data

Parity

Stop Bit

115200

8

None

1

Telnet / TCP Configuration

Telnet/TCP port

Default Password

9999 admin

Responses

Response

INVALID_COMMAND

OK

ERROR

Description

Invalid command or Command not found

Command execution was successful

Command execution failed or invalid Arguments


EMCEE200

(IWGVMTXMSR

7IXQSHI

'SQQERH

1(R

;LIVI

R!1SHI

R (IWGVMTXMSR

1MVVSV'32*-()2')QSRMXSVMWE

QMVVSVSJXLI46)7)28(IJEYPX

-RHITIRHIRX'32*-()2')ERH

46)7)28GER[SVOMRHITIRHIRXP]

1(# 5YIV]QSHI

7IPIGX-RTYXSRE;MRHS[ ':RQ

;LIVI

R!;MRHS[?%(A

Q!-RTYX?A

5YIV]-RTYXWSRE;MRHS[ ':R#

;LIVI

R!;MRHS[?%(A

7IX%YHMS1SHI

5YIV]%YHMS1SHI

'%R

;LIVI

R!XS1YXI

R!?%(A8MIXS;MRHS[

R!?AJSV,(1--RTYX

R!JSV8370-2/

R!JSV7XIVIS

'%#

6IWTSRWI

)K

""1(

3/

)K

""1(#

1(

)K

7LS[-RTYX

SR;MRHS[%

""':%

3/

)K

-RTYXMWGYVVIRXP]

WLS[RSR;MRHS[%

""':%#

':%

)K

""'%

3/

)K

""'%#

'%


24

EMCEE200

7IX[MRHS[WMÎ

238)

3RP]ZEPMHMR1(

5YIV][MRHS[WMÎ

7IX[MRHS[0E]SYX

5YIV][MRHS[PE]SYX

;7R!<=;,4

;LIVI

R!;MRHS[?%(A

<=!4SWMXMSRSJFSXXSQPIJXZIVXI\SJXLI[MRHS[

;!;MHXLSJXLI[MRHS[

,!,IMKLXSJXLI[MRHS[

4!>MRHI\SJXLI[MRHS[

238)

8LIZEPYISJ<=;,HITIRHWSRXLISYXTYX

VIWSPYXMSR

;7R#

)K

7XEVX;MRHS[%EX

7MÎ

\TM\IPW

MRHI\

"";7%!

3/

)K

"";7%#

;7%!

;LIVI

R!;MRHS[?%(A

;0R )K

"";0

3/ ;LIVI

1SHI

R n

1-4

5-9

A B

A

B A

B

0E]SYX

C

B

A A

B

D

A B

10-14

15-19

1SHI

1-9

A

C

B

A

C

B

D

C

A

B

B

A

C D

A

A

A

A

A B

A

A

B

A

B

B

A

C

B

B

C

A

B C

A

D

C D

C

D

C

D

C

B

B

B

C

C

B C

D

A B

C

A

B

C

D

B A C

B

C

D

A

;0# )K

"";0#

;0


7IX1-'ZSPYQI

5YIV]1-'ZSPYQI

1-'RQ

;LIVI

R!1MG?A

Q!:SPYQI?A

Q!XSQYXI

1-'R#

;LIVI

R!1MG?A

7IX%::SPYQI

238)

8LMW[MPPEHNYWXEPPZSPYQI

:30R

;LIVI

R!:SPYQI0IZIP?A

5YIV]%::SPYQI :30#

7EZMRK4VIWIX

238)

4VIWIXGSRJMKYVEXMSR-RGPYHI

W1SHI%YHMSWSYVGI-RTYX

7SYVGIGSRJMKSR

XLI;MRHS[ERHXLI

;MRHS[0E]SYX

6IGEPP4VIWIX

47R

;LIVI

R!4VIWIX?A

46R

5YIV]4VIWIX

;LIVI

R!4VIWIX?A

46#

8YVR323**,(1-:MHIS :-(RQ

;LIVI

5YIV],(1-:MHIS

R!JSV,(1-'SRJMHIRGI

R!JSV,(1-4VIWIRX

Q!MW3**

Q!MW32

:-(R#


EMCEE200

)K

""1-'

3/

)K

""1-'#

1-'

)K

"":30

3/

)K

"":30#

:30

)K

""47

3/

)K

""46

3/

)K

""46#

46

)K

8YVR4VIWIRX3**

"":-(

3/

)K

"":-(#

:-(

25

26

EMCEE200

7IX,('4-RTYX1SHI

5YIV],('4-RTYX1SHI

7IX,('43YXTYX1SHI

,('4-RQ

;LIVI

R!-RTYX?A

Q!1SHI

Q (IWGVMTXMSR

7YTTSVXYTXS,('4(IJEYPX

7YTTSVXYTXS,('4

,('4RSXWYTTSVXIH

238)8LMWWIXXMRKHSIWRSXƄWXVMTƅ

,('4JVSQXLIWSYVGI-XXIPPWXLI

MRTYXXSVINIGXEPP,('4RIKSXMEXMSR

,('4-R#

;LIVI

R!-RTYX?A

,('43RQ

;LIVI

R!3YXTYX?A

Q!1SHI

Q (IWGVMTXMSR

4EWWXLVSYKL(IJEYPX

)REFPI,('4SRSYXTYX[LIR

ER]WSYVGILEW,('4GSRXIRX

(MWEFPI,('4MJRS,('4GSRXIRXMW

GSRRIGXIH

%P[E]WSYXTYX,('4

%P[E]WSYXTYX,('4

5YIV],('43YXTYX1SHI ,('43R#

;LIVI

R!3YXTYX?A

)K

(MWEFPI,('4

WYTTSVXSR-RTYX

"",('4-

3/

)K

"",('4-#

,('4-

)K

"",('43

3/

)K

"",('43#

,('43


7IX3YXTYX6IWSPYXMSR

5YIV]3YXTYX6IWSPYXMSR

:6R

;LIVI

R!6IWSPYXMSR-RHI\

R

(IJEYPX

6IWSPYXMSR

2EXMZI

\$,^

\$,^

\$,^

\$,^

\$,^

\$,^

\$,^

\$,^

\$,^

\$,^

\$,^

\$,^

\$,^

\$,^

\$,^

\$,^

\$,^

\$,^

\$,^

:6#

7IX3YXTYX'SPSV7TEGI :'7R

;LIVI

R!'SPSVWTEGI-RHI\

R 6IWSPYXMSR

6+&

='F'V

='F'V

5YIV]3YXTYX'SPSV7TEGI :'7#

)K

"":6

3/

)K

"":6#

:6

)K

"":'7

3/

)K

"":'7#

:'7

EMCEE200


EMCEE200

28

7IX)(-(SR-RTYX )7RQ

;LIVI

R!-RTYX?A

Q!)(-(-RHI\

Q (IWGVMTXMSR

3YXTYX7MRO)(-(

3YXTYX7MRO)(-(

$,^'L

$,^'L

/$,^'L

/$,^'L(IJEYPX

'YWXSQ9WIV(IJMRIH

5YIV])(-(WIVZIHSR-RTYX )7R#

0IEVR)(-(JVSQ3YXTYXERH

7EZIMXEWE'YWXSQ

238)

7IX)7R!XSYWIXLMW)(-(

;LIVI

R!-RTYX?A

)0R

;LIVI

R!3YXTYX?A

7IXW[MXGLMRKIJJIGX 7)R

;LIVI

R!)JJIGXW

R (IWGVMTXMSR

7IEQPIWW(IJEYPX

*EHI

(MWWSPZI

;MTI

5YIV]W[MXGLMRKIJJIGX 7)#

7XEVX7XST6IGSVHMRK

5YIV]6IGSVHMRK

6'R

;LIVI

R!MW3**

R!MW32

6'#

)K

"")7

3/

)K

"")7#

)7

)K

"")0

3/

)K

""7)

3/

)K

""7)#

7)

)K

""6'

3/

)K

""6'#

6'


*VSRX4ERIP0SGO

5YIV]*VSRX4ERIP0SGO

0/R

;LIVI

R!MW3**

R!MW32

0/#

7IX(,'4

5YIV](,'4

(,'4R

;LIVI

R!MW3**

R!MW32

(,'4#

7IX-47YFRIX+EXI[E] -4\\\\\\\\\\\\

7&2\\\\\\\\\\\\

+;\\\\\\\\\\\\

5YIV]-47YFRIX+EXI[E] -4#

7&2#

+;#

5YIV]1%' 1%'

4IVJSVQ*EGXSV]6IWIX

*MVQ[EVI:IVWMSR

*(

*;

6IFSSX

4S[IV'SQQERH

6&

4;R

;LIVI

R!MW3**

R!MW32

4;# 5YIV]4S[IV


EMCEE200

)K

""0/

3/

)K

""0/#

0/

)K

""(,'4

(,'4

)K

""(,'4#

(,'4

)K

""-4

3/

)K

""-4#

)K

""1%'#

************

3/

)6636

)K

""*;

:)6

)K

""6&

3/

)K

""4;

3/

)K

""4;#

4;

29

EMCEE200

Web GUI Control

EMCEE200 can be configured and controlled via its built-in Web GUI. For more information, please see the software guide, available on the product page of the website: https://halltechav.com/product/emcee200/

Default Login

Username

Password

Admin admin

30 © Copyright 2021 Hall Technologies, LLC

EMCEE200

IR Remote Control

EMCEE200 comes with an intuitive IR remote control to quickly change settings during a presentation.

If the EMCEE200 is in a location that is difficult to reach with the IR remote, the included IR Receiver extension cable may be used to provide easier access.

BUTTON

REC

PRES

CONF

POWER

PRESET

VOLUME

SOURCE

WINDOW

FULLSCREEN

FUNCTION

Start or stop recording to an attached USB storage device.

Blank or un-blank the PRESENT HDMI output.

Blank or un-blank the CONFIDENCE HDMI output.

Turn EMCEE200 on or off.

Switch between first four presets.

Adjust volume of AV or MIC inputs. Mute AV or last MIC adjusted.

Select a source to apply to a window.

Apply selected source to the selected window.

Switch between full-screen window layouts for simple 4:1 switching.


EMCEE200

8.0 TROUBLESHOOTING

If you are experiencing problems getting the EMCEE200 to work properly, please use the following troubleshooting suggestions. If none of the steps listed below are successful and you believe the unit may be malfunctioning, please contact Hall Technologies Support using the contact information at the beginning of this manual.

Do NOT attempt to make repairs yourself; there are no user-serviceable parts inside. Opening the unit presents a risk of electric shock and will void your warranty.

32

4VSFPIQ

2SZMHISSYXTYX

FPEGOZMHIS

2SEYHMS

QMGVSTLSRISYXTYX

2S97&6IGSVHMRK

2S97&7XVIEQMRK

97&7XVIEQMQEKI

JPMTTIHLSVM^SRXEPP]

4SWWMFPI'EYWI

3YXTYXMW&PEROIH

,('4LERHWLEOIJEMPYVI

6IWSPYXMSRRSXWYTTSVXIH 'LERKISYXTYXVIWSPYXMSRMR37(XSEVIWSPYXMSRWYTTSVXIH

F]XLIHMWTPE]'LERKISYXTYXXSƈ%983ƉXSEYXSQEXMGEPP]

WIPIGXXLIHMWTPE]ƅWTVIJIVVIHREXMZIVIWSPYXMSR

%YHMSMW1YXIH

)RWYVIXLIHMWTPE]WYTTSVXW,('49WI37(SV+9-XS

GLERKI,('4GSQTEXMFMPMX]SJMRTYXWSVSYXTYXW

-RGSVVIGXEYHMSVSYXMRK

1-'W[MXGLMR[VSRK

TSWMXMSR

*SVQEXXMRKMWWYI

4YWLXLI:3091)SV1-'ORSFXSYRQYXIXLIWIPIGXIH

EYHMS

9WI37(+9-SV67XSGLERKIEYHMSVSYXMRK7II

7IGXMSRYRHIVƈ6SYXMRK%YHMSƉJSVEZEMPEFPISTXMSRW

1-'MRTYXGERFIQMGSVPMRIPIZIP)RWYVIXLIWPMHIW[MXGL

MWWIXXSXLIGSVVIGXTSWMXMSR

(VMZI*YPP

7SYVGIHMWTPE]YWMRK

,('4

97&WXSVEKIHIZMGIQYWXFIJSVQEXXIHYWMRKE*%8JMPI

W]WXIQ

*VIIYTWTEGISR97&WXSVEKIHIZMGI

7SYVGIW[MXL,('4[MPPRSXFIVIGSVHIH9WI37(XSXYVR

SJJ,('4WYTTSVXSJMRTYXWERHSYXTYXW7SYVGIWXLEX

GERRSXGSQTP][MPPRSXFIVIGSVHIH7II7IGXMSR,('4

RSXMGIJSVQSVIMRJSVQEXMSR

97&VIGSVHMRKZMHISMWXLIWEQIEW46)7)28SYXTYX 9REFPIXSVIGSVH

'32*-()2')SYXTYX

7SYVGIHMWTPE]YWMRK

,('4

-JER]MRTYXMWYWMRK,('4WXVIEQMRK[MPPFIHMWEFPIH9WI

37(XSXYVRSJJ,('4WYTTSVXSJMRTYXWERHSYXTYXW

7SYVGIWXLEXGERRSXGSQTP][MPPRSXFIVIGSVHIH7II

7IGXMSR,('4RSXMGIJSVQSVIMRJSVQEXMSR

4'VIWSPYXMSRQMWQEXGL

7SPYXMSR

9WI-6VIQSXI+9-SV67XSYRFPEROXLIEJJIGXIH

SYXTYX

'LIGO3YXTYXVIWSPYXMSRSJ)1'))3R4'WIXXLI

WXVIEQMRKVIWSPYXMSRXSXLIWEQIVIWSPYXMSRSVPS[IV

7XVIEQMRKZMHISMWXLIWEQIEW46)7)28SYXTYX 9REFPIXSVIGSVH

'32*-()2')SYXTYX

4'MWXVIEXMRKWXVIEQEWE

WIPJJEGMRKGEQIVE

7SJXGSHIGTVSKVEQWXVIEXGEQIVEMRTYXWEWWIPJJEGMRK

GEQIVEWERH[MPPQMVVSVXLIZMHISWLS[RXSXLITVIWIRXIV

3TIR97&WXVIEQMRERI\XIVREPGEQIVESV37&WXYHMSETT

2SJVSRXTERIPGSRXVSP *VSRX4ERIP0SGOSYX

IREFPIH

2S+9-SV8IPRIX

GSRXVSP

-RGSVVIGXWIXXMRKW

9RORS[RSXLIV

9WI37(SV67XSUYIV]-4KEXI[E](,'4ERHTSVX

WIXXMRKW6IFSSXQE]FIVIUYMVIHXSETTP]RI[WIXXMRKW

9WI37(67SV+9-XSVIWIXYRMXXSJEGXSV]HIJEYPXW

4PIEWIEPPS[XMQIXSGSQTPIXIERHHSRSXVIQSZITS[IV

HYVMRKXLMWTVSGIWW

4VSFPIQ

2SZMHISSYXTYX

FPEGOZMHIS

2SEYHMS

QMGVSTLSRISYXTYX

2S97&6IGSVHMRK

2S97&7XVIEQMRK

97&7XVIEQMQEKI

JPMTTIHLSVM^SRXEPP]

4SWWMFPI'EYWI 7SPYXMSR

3YXTYXMW&PEROIH



SYXTYX






%YHMSMW1YXIH


1-'W[MXGLMR[VSRK

TSWMXMSR

*SVQEXXMRKMWWYI


EYHMS






W]WXIQ

(VMZI*YPP

7SYVGIHMWTPE]YWMRK

,('4







'32*-()2')SYXTYX

7SYVGIHMWTPE]YWMRK

,('4









'32*-()2')SYXTYX


WIPJJEGMRKGEQIVE




9WI+9-SV67XSYRPSGOXLIJVSRXTERIP 2SJVSRXTERIPGSRXVSP *VSRX4ERIP0SGOSYX

IREFPIH

2S+9-SV8IPRIX

GSRXVSP

-RGSVVIGXWIXXMRKW

9RORS[RSXLIV





HYVMRKXLMWTVSGIWW

4VSFPIQ

2SZMHISSYXTYX

FPEGOZMHIS

2SEYHMS

QMGVSTLSRISYXTYX

2S97&6IGSVHMRK

2S97&7XVIEQMRK

97&7XVIEQMQEKI

JPMTTIHLSVM^SRXEPP]

4SWWMFPI'EYWI

3YXTYXMW&PEROIH





%YHMSMW1YXIH




1-'W[MXGLMR[VSRK

TSWMXMSR

*SVQEXXMRKMWWYI


EYHMS





(VMZI*YPP

7SYVGIHMWTPE]YWMRK

,('4


W]WXIQ







'32*-()2')SYXTYX

7SYVGIHMWTPE]YWMRK

,('4






7SPYXMSR


SYXTYX




'32*-()2')SYXTYX


WIPJJEGMRKGEQIVE





IREFPIH

2S+9-SV8IPRIX

GSRXVSP

-RGSVVIGXWIXXMRKW

9RORS[RSXLIV





HYVMRKXLMWTVSGIWW

4VSFPIQ

2SZMHISSYXTYX

FPEGOZMHIS

2SEYHMS

QMGVSTLSRISYXTYX

2S97&6IGSVHMRK

2S97&7XVIEQMRK

97&7XVIEQMQEKI

JPMTTIHLSVM^SRXEPP]


3YXTYXMW&PEROIH



SYXTYX






%YHMSMW1YXIH


1-'W[MXGLMR[VSRK

TSWMXMSR

*SVQEXXMRKMWWYI


EYHMS






W]WXIQ

(VMZI*YPP

7SYVGIHMWTPE]YWMRK

,('4







'32*-()2')SYXTYX

7SYVGIHMWTPE]YWMRK

,('4





EMCEE200




'32*-()2')SYXTYX


WIPJJEGMRKGEQIVE





IREFPIH

2S+9-SV8IPRIX

GSRXVSP

-RGSVVIGXWIXXMRKW

9RORS[RSXLIV





HYVMRKXLMWTVSGIWW

Firmeware Updates

Firmware updates may be made available to add features or to improve performance. These updates will be available on the product page of the website: https://halltechav.com/product/emcee200/

The firmware update process is as follows:

1. Download the file or files from the website.

2. Transfer the file(s) to a USB flash drive, formatted FAT32. Place all the file(s) in the ROOT

directory of the drive.

3. Remove power from the EMCEE200. Plug the flash drive into the USB-B port on the front of the

EMCEE200, and then re-apply power.

4. Wait for the update process to take place. Depending on the number of firmware files being

replaced, this may take several minutes. During this time, the LEDs on the front panel may

flash.

5. The EMCEE200 will automatically reboot after the update is complete. After rebooting, the

USB drive may be removed.

6. Firmware version can be checked via OSD, Web GUI, or RS-232/telnet.

:MHIS

%YHMS

'SRXVSP

-RTYX

3YXTYX

\ ,(1-E

\

\

,(1-E

%:I\TERWMSRFE]W

+FTWFERH[MHXL

9TXS//$,^FMXW

,('4

97&'ETXYVI 97&WYTIVWTIIHX]TI&JIQEPI

'ETXYVIYTXS//$,^

97&6IGSVHMRK

'SQTEXMFPI[MXL;MRHS[W1EGERH0MRY\37

97&X]TI%JIQEPI

,(1-

1-'-RTYX

)QFIHHMRK

(IIQFIHHMRK

67

-4

T$,^VIGSVHMRK

4'14'14'1

FMXWTIVWEQTPIYTXSO,^WEQTPMRKVEXI

\ QQEYHMSNEGO

\ 4MR4LSIRM\GSRRIGXSV

:4LERXSQERHPMRIPIZIPEYHMSWYTTSVX

\ (MKMXEP8370-2/

\ 7XIVIS06QQEYHMSNEGO

\ (MKMXEP8370-2/


\ &EPERGIHWXIVIS4MR4LSIRM\GSRRIGXSV

&EYHVEXI

4MR4LSIRM\GSRRIGXSV

)QFIHHIH;IF+9-

8'4-48IPRIXGSQQERHW

O,^

4S[IV

-66IQSXI

7YTTP]

'SRWYQTXMSR

8IQTIVEXYVI 3TIVEXMSR

1IGLERMGEP

7XSVEKI

6IPEXMZI,YQMHMX] b 6,?RSRGSRHIRWMRKA

1SYRX

(MQIRWMSRW

,SYWMRK

)7(

:%('97)9WXERHEVHW')*''90GIVXMJMIH

;X]TMGEP;QE\[MXLI\TERWMSRGEVHW bq'?bq*A bq'?bq*A

1SYRXMRKFVEGOIXWJSV69VEGOSVWYVJEGIQSYRX

ƉQQ;\ƉQQ(\ƉQQ,

%PYQMRYQ

,YQERFSH]QSHIPrO:?EMVKETHMWGLEVKIArO:

?GSRXEGXHMWGLEVKIA


4VSFPIQ

2SZMHISSYXTYX

FPEGOZMHIS

2SEYHMS

QMGVSTLSRISYXTYX

2S97&6IGSVHMRK

2S97&7XVIEQMRK

97&7XVIEQMQEKI

JPMTTIHLSVM^SRXEPP]


3YXTYXMW&PEROIH



SYXTYX






%YHMSMW1YXIH


1-'W[MXGLMR[VSRK

TSWMXMSR

*SVQEXXMRKMWWYI


EYHMS






W]WXIQ

(VMZI*YPP

7SYVGIHMWTPE]YWMRK

,('4







'32*-()2')SYXTYX

7SYVGIHMWTPE]YWMRK

,('4









'32*-()2')SYXTYX


WIPJJEGMRKGEQIVE





IREFPIH

2S+9-SV8IPRIX

GSRXVSP

-RGSVVIGXWIXXMRKW

9RORS[RSXLIV





HYVMRKXLMWTVSGIWW

34

EMCEE200

9.0 SPECIFICATIONS

:MHIS

%YHMS

'SRXVSP

-RTYX

3YXTYX

\ ,(1-E

\

\

,(1-E

%:I\TERWMSRFE]W

+FTWFERH[MHXL

9TXS//$,^FMXW

,('4


'ETXYVIYTXS//$,^

97&6IGSVHMRK


97&X]TI%JIQEPI

,(1-

1-'-RTYX

)QFIHHMRK

(IIQFIHHMRK

67

-4

T$,^VIGSVHMRK

4'14'14'1


\ QQEYHMSNEGO



\ (MKMXEP8370-2/


\ (MKMXEP8370-2/



&EYHVEXI

4MR4LSIRM\GSRRIGXSV

)QFIHHIH;IF+9-

8'4-48IPRIXGSQQERHW

O,^

4S[IV

-66IQSXI

7YTTP]

'SRWYQTXMSR


1IGLERMGEP

7XSVEKI


1SYRX

(MQIRWMSRW

,SYWMRK

)7(




ƉQQ;\ƉQQ(\ƉQQ,

%PYQMRYQ


?GSRXEGXHMWGLEVKIA

Specifications are subject to change without notice


:MHIS

%YHMS

'SRXVSP

-RTYX

3YXTYX

\ ,(1-E

\

\

,(1-E

%:I\TERWMSRFE]W

+FTWFERH[MHXL

9TXS//$,^FMXW

,('4


'ETXYVIYTXS//$,^

97&6IGSVHMRK


97&X]TI%JIQEPI

,(1-

1-'-RTYX

)QFIHHMRK

(IIQFIHHMRK

67

-4

T$,^VIGSVHMRK

4'14'14'1


\ QQEYHMSNEGO



\ (MKMXEP8370-2/


\ (MKMXEP8370-2/



&EYHVEXI

4MR4LSIRM\GSRRIGXSV

)QFIHHIH;IF+9-

8'4-48IPRIXGSQQERHW

O,^

4S[IV

-66IQSXI

7YTTP]

'SRWYQTXMSR


1IGLERMGEP

7XSVEKI


1SYRX

(MQIRWMSRW

,SYWMRK

)7(




ƉQQ;\ƉQQ(\ƉQQ,

%PYQMRYQ


?GSRXEGXHMWGLEVKIA

© Copyright 2021. Hall Technologies

All rights reserved.

Ph: (800)959-6439

Hall Technologies EMCEE200 Owner's Manual

PRESENTATION SWITCHER

USER’S MANUAL

Table of Contents

Contacting Hall Technologies

Warranty and Repairs

Safety and Certification

FCC Notice

Revision History

1.0 INTRODUCTION

Applications

Hybrid Learning Classroom

Features

2.0 PACKAGE CONTENTS

Model EMCEE200

3.0 CONNECTOR AND INDICATOR FUNCTIONS

Front Panel

Front Panel (continued)

HDCP Notice

Rear Panel

Rear Panel (continued)

4.0 SETUP

Installation Recommendations

EMCEE200 Output Cards

HDBaseT™ Transmitter Output Card Installation (EXP-HDBT3-TRX100)

Audio Amplifier Output Card Installation (EXP-AMP-4860)

Connecting Multiple Speakers to the Audio Amp

LEFT RIGHT

LEFT RIGHT

5.0 CONFIGURATION AND OPERATION

Introduction to Window-Based Switching

Mirrored Window Layouts (Mode 1)

Independent Window Layouts (Mode 2)

Routing Audio – Input Tie or Window Tie

Creating and Recalling Presets

6.0 RECORDING AND LIVE CAPTURE

HDCP Notice

USB Recording to Storage Device

USB Capture Streaming – Soft Codec

Live-Streaming Considerations

7.0 CONTROL

RS-232 / Telnet / TCP Control

Web GUI Control

IR Remote Control

8.0 TROUBLESHOOTING

Firmeware Updates

9.0 SPECIFICATIONS

Key Features

Related manuals

Hall Technologies

EMCEE200

Kramer

VW-16

Hall Technologies

AMP-4840

Hall Technologies

HT-TRK1

Hall Technologies

SSW-HD-4

Hall Technologies

HSM-44-UHD

LIVICOM

Livi Smart Hub 2G

Hall Technologies

HD-AUD-IO

Crown

XLi800

Hall Technologies

SSW-HD-4A

Hall Technologies

HSM-88-4K

DEA

KIT ADA-LIVI/N

Frequently Answers and Questions

Can I use EMCEE200 to record my presentations?

Can I control EMCEE200 remotely?

Can I use EMCEE200 to switch between multiple video sources?

Can I use EMCEE200 to mix audio from multiple microphones?

Can I use EMCEE200 to live stream my presentations?