advertisement
Camera User Guide
ENGLISH
•
Make sure you read this guide, including the “Safety
8 ) section, before using the camera.
•
Reading this guide will help you learn to use the camera properly.
•
Store this guide safely so that you can use it in the future.
•
Click the buttons in the lower right to access other pages.
: Next page
: Previous page
: Page before you clicked a link
•
To jump to the beginning of a chapter, click the chapter title at right.
From chapter title pages, you can access topics by clicking their titles.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
©CANON INC. 2014 CDD-E567-010 1
Package Contents
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera retailer.
Camera Battery Pack
NB-12L
Battery Charger
CB-2LG/CB-2LGE
Printed Matter
Wrist Strap
•
A memory card is not included (
).
Compatible Memory Cards
The following memory cards (sold separately) can be used, regardless of capacity.
•
SD memory cards*
1
•
SDHC memory cards *
1
*
2
•
SDXC memory cards*
1
*
2
*1 Cards conforming to SD standards. However, not all memory cards have been verified to work with the camera.
*2 UHS-I memory cards are also supported.
Preliminary Notes and Legal
Information
•
Take and review some test shots initially to make sure the images were recorded correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including memory cards, that result in the failure of an image to be recorded or to be recorded in a way that is machine readable.
•
Images recorded by the camera shall be for personal use. Refrain from unauthorized recording that infringes on copyright law, and note that even for personal use, photography may contravene copyright or other legal rights at some performances or exhibitions, or in some commercial settings.
•
The camera warranty is valid only in the area of purchase. In case of camera problems while abroad, return to the area of purchase before contacting a Canon Customer Support Help Desk.
•
Although the LCD monitor is produced under extremely high-precision manufacturing conditions and more than 99.99% of the pixels meet design specifications, in rare cases some pixels may be defective or may appear as red or black dots. This does not indicate camera damage or affect recorded images.
•
The LCD monitor may be covered with a thin plastic film for protection against scratches during shipment. If covered, remove the film before using the camera.
•
When the camera is used over an extended period, it may become warm.
This does not indicate damage.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
2
Part Names and Conventions in This
Guide
Strap mount
Zoom lever
Shooting: < i (telephoto)> /
< j (wide angle)>
Playback: < k (magnify)> /
< g (index)>
Lamp
Lens
Movie button
Shutter button
Power button
Microphone
Flash
< h (Flash)> switch
(N-Mark)* 1
< (Mobile device connection)> button
Tripod socket
Memory card/battery cover
Wi-Fi antenna area
DC coupler cable port
Story Camera (rear-facing camera)
Screen (LCD monitor)*
Indicator
<
2
(Story Highlights)> button
Mode switch
HDMI TM terminal
<
1 (Playback)> button
< n> button
< b (Exposure compensation)> /
< (Wi-Fi)> / Up button
< e (Macro)> / Left button
Speaker
< (Favorite)> button
AV OUT (Audio/video output) /
FUNC./SET button
< h (Flash)> / Right button
< l (Display)> / Down button
DIGITAL terminal
*2 Gestures may not be detected as easily if you apply a screen protector. In this case, increase the sensitivity of the touch-screen panel (
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
3
•
In this guide, icons are used to represent the corresponding camera buttons and switches on which they appear or which they resemble.
•
The following camera buttons and controls are represented by icons.
< o> Up button on back
< q> Left button on back
< r> Right button on back
< p> Down button on back
•
Shooting modes and on-screen icons and text are indicated in brackets.
•
: Important information you should know
•
: Notes and tips for expert camera use
•
: Indicates touch-screen operations
•
=xx
: Pages with related information (in this example, “xx” represents a page number)
•
Instructions in this guide apply to the camera under default settings.
•
For convenience, all supported memory cards are simply referred to as the “memory card”.
•
The tabs shown above titles indicate whether the function is used for still images, movies, or both.
Still Images
Movies
: Indicates that the function is used when shooting or viewing still images.
: Indicates that the function is used when shooting or viewing movies.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
4
Table of Contents
Package Contents .........................
Compatible Memory Cards ............
Information .....................................
This Guide......................................
Table of Contents ...........................
Common Camera Operations ........
Safety Precautions .........................
Auto Mode ..................................
Shooting with Camera-Determined
Settings ........................................
Common, Convenient Features ...
Using Face ID ..............................
Image Customization Features ....
Helpful Shooting Features ...........
Customizing Camera Operation ..
Basic Guide ....................
Initial Preparations .......................
Trying the Camera Out ................
Mode ...........................................
Shooting in Hybrid Auto Mode .....
Including Your Own Reactions as
You Shoot (Dual Capture) ............
Camera Basics ...........................
On/Off ..........................................
Shutter Button ..............................
Shooting Display Options ............
Using the FUNC. Menu ................
Using Menus ................................
On-Screen Keyboard ...................
Indicator Display ..........................
Clock ............................................
Other Shooting Modes ..............
Specific Scenes ...........................
Applying Special Effects ..............
Purposes ......................................
Shooting Various Movies .............
P Mode ........................................
([P] Mode) ....................................
Image Brightness (Exposure) ......
Image Colors................................
Shooting Range and Focusing ....
Flash ............................................
Other Settings ..............................
Playback Mode...........................
Viewing ........................................
Browsing and Filtering Images ....
Editing Face ID Information .........
Image Viewing Options ................
Protecting Images ........................
Erasing Images ..........................
Rotating Images .........................
Tagging Images as Favorites .....
Touch Actions .............................
Editing Still Images ....................
Editing Movies............................
(Story Highlights) .......................
Wi-Fi Functions ........................
What You Can Do with Wi-Fi .....
Registering Web Services ..........
Smartphone ...............................
Computer ...................................
Accessing the Wi-Fi Menu .........
Point ...........................................
Point ...........................................
Camera ......................................
Sending Images .........................
Saving Images to a Computer ...
Using the < > Button ................
(Image Sync)..............................
Camera ......................................
Settings ......................................
Setting Menu ............................
Functions ...................................
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
5
Accessories .............................
System Map ...............................
Optional Accessories .................
Using Optional Accessories .......
Using the Software ....................
Printing Images ..........................
Appendix ..................................
Troubleshooting .........................
On-Screen Messages ................
On-Screen Information ..............
Functions and Menu Tables .......
Handling Precautions .................
Specifications .............................
Index ..........................................
Precautions ................................
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
6
Common Camera Operations
4 Shoot
z z
(Auto Mode, Hybrid Auto Mode) .....................................................
z z settings (Creative Shot Mode) .............................................................
Shooting people well
I
Portraits
(
)
P
Against Snow
)
Matching specific scenes
Night Scenes
(
) t
Fireworks
)
Applying special effects
Vivid Colors
(
Miniature Effect
(
Soft Focus
(
Poster Effect
(
Toy Camera Effect
(
Monochrome
(
Fish-Eye Effect
(
Background Defocus
(
z z
z z
z z
z z
z z
z z
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
7
1 View
z z
z z
z z
z z
z z
z z
E Shoot/View Movies
z z
z z
c Print
z z
Save
z z
z z
Use Wi-Fi Functions
z z
z z
z z
Safety Precautions
•
Before using the product, ensure that you read the safety precautions described below. Always ensure that the product is used correctly.
•
The safety precautions noted here are intended to prevent you and other persons from being injured or incurring property damage.
•
Be sure to also check the guides included with any separately sold accessories you use.
Warning
Denotes the possibility of serious injury or death.
• Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage eyesight.
In particular, remain at least 1 meter (3.3 feet) away from infants when using the flash.
•
Store this equipment out of the reach of children and infants.
A strap wound around a child’s neck may result in asphyxiation.
If your product uses a power cord, mistakenly winding the cord around a child’s neck may result in asphyxiation.
•
Use only recommended power sources.
•
Do not disassemble, alter, or apply heat to the product.
•
Avoid dropping or subjecting the product to severe impacts.
•
Do not touch the interior of the product if it is broken, such as when dropped.
•
Stop using the product immediately if it emits smoke or a strange smell, or otherwise behaves abnormally.
•
Do not use organic solvents such as alcohol, benzine, or thinner to clean the product.
•
Avoid contact with liquid, and do not allow liquid or foreign objects inside.
This could result in electrical shock or fire.
If the product gets wet, or if liquid or foreign objects get inside, remove the battery pack/batteries or unplug immediately.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
8
• Do not look through the viewfinder (if your model has one) at intense light sources, such as the sun on a clear day or an intense artificial light source.
This could damage your eyesight.
•
Do not touch the product during thunderstorms if it is plugged in.
This could result in electrical shock or fire. Immediately stop using the product and distance yourself from it.
•
Use only the recommended battery pack/batteries.
• Do not place the battery pack/batteries near or in direct flame.
This may cause the battery pack/batteries to explode or leak, resulting in electrical shock, fire, or injuries. If leaking battery electrolyte comes into contact with eyes, mouth, skin, or clothing, immediately flush with water.
•
If the product uses a battery charger, note the following precautions.
- Remove the plug periodically and, using a dry cloth, wipe away any dust and dirt that has collected on the plug, the exterior of the power outlet, and the surrounding area.
- Do not insert or remove the plug with wet hands.
- Do not use the equipment in a manner that exceeds the rated capacity of the electrical outlet or wiring accessories. Do not use if the plug is damaged or not fully inserted in the outlet.
-
Do not allow dust or metal objects (such as pins or keys) to contact the terminals or plug.
- Do not cut, damage, alter, or place heavy items on the power cord, if your product uses one.
This could result in electrical shock or fire.
•
Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the operation of electronic instruments and other devices. Exercise adequate caution when using the product in places where use of electronic devices is restricted, such as inside airplanes and medical facilities.
Caution
Denotes the possibility of injury.
•
When carrying the product by the strap, be careful not to bang it, subject it to strong impacts or shocks, or let it get caught on other objects.
•
Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
•
Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
• When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
•
Avoid using, placing, or storing the product in the following places:
- Places subject to direct sunlight
-
Places subject to temperatures above 40 °C (104 °F)
- Humid or dusty places
These could cause leakage, overheating, or an explosion of the battery pack/batteries, resulting in electrical shock, fire, burns, or other injuries.
Overheating and damage may result in electrical shock, fire, burns, or other injuries.
•
The slideshow transition effects may cause discomfort when viewed for prolonged periods.
• When using optional lenses, lens filters, or filter adapters (if applicable), be sure to attach these accessories firmly.
If the lens accessory becomes loose and falls off, it may crack, and the shards of glass may lead to cuts.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
9
• On products that raise and lower the flash automatically, make sure to avoid pinching your fingers with the lowering flash.
This could result in injury.
Caution
Denotes the possibility of property damage.
•
Do not aim the camera at intense light sources, such as the sun on a clear day or an intense artificial light source.
Doing so may damage the image sensor or other internal components.
•
When using the camera on a sandy beach or at a windy location, be careful not to allow dust or sand to enter the camera.
• On products that raise and lower the flash automatically, do not push the flash down or pry it open.
This may cause the product to malfunction.
• Wipe off any dust, grime, or other foreign matter on the flash with a cotton swab or cloth.
The heat emitted from the flash may cause foreign matter to smoke or the product to malfunction.
•
Remove and store the battery pack/batteries when you are not using the product.
Any battery leakage that occurs may cause product damage.
•
Before you discard the battery pack/batteries, cover the terminals with tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
•
Unplug any battery charger used with the product when not in use.
Do not cover with a cloth or other objects when in use.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort, resulting in fire.
•
Do not leave any dedicated battery packs near pets.
Pets biting the battery pack could cause leakage, overheating, or explosion, resulting in product damage or fire.
•
If your product uses multiple batteries, do not use batteries that have different levels of charge together, and do not use old and new batteries together. Do not insert the batteries with the + and – terminals reversed.
This may cause the product to malfunction.
•
Do not sit down with the camera in your pant pocket.
Doing so may cause malfunctions or damage the screen.
•
When putting the camera in your bag, ensure that hard objects do not come into contact with the screen. Also close the screen (so that it faces the body), if your product’s screen closes.
•
Do not attach any hard objects to the product.
Doing so may cause malfunctions or damage the screen.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
10
Basic Guide
Basic information and instructions, from initial preparations to shooting and playback
Initial Preparations ...........................................
Attaching the Strap ................................................
Holding the Camera ..............................................
Charging the Battery Pack ....................................
Inserting the Battery Pack and Memory Card .......
Setting the Date and Time .....................................
Display Language .................................................
Trying the Camera Out .....................................
Shooting (Smart Auto) ...........................................
Viewing ..................................................................
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
11
Initial Preparations
Prepare for shooting as follows.
Attaching the Strap
Attach the strap.
z z strap hole ( ), and then pull the other end of the strap through the loop on the threaded end ( ).
z z side of the camera.
Holding the Camera
z z z z your body and hold the camera securely to prevent it from moving. If you have raised the flash, do not rest your fingers on it.
Charging the Battery Pack
Before use, charge the battery pack with the included charger. Be sure to charge the battery pack initially, because the camera is not sold with the battery pack charged.
1
Insert the battery pack.
z z
marks on the battery pack and charger, insert the battery pack by pushing it in ( ) and down ( ).
CB-2LG
CB-2LGE
2
Charge the battery pack.
z z the charger into a power outlet ( ).
z z charger, then plug the other end into a power outlet.
z z charging begins.
z z green.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
3
Remove the battery pack.
z z remove the battery pack by pushing it in
( ) and up ( ).
12
•
To protect the battery pack and keep it in optimal condition, do not charge it continuously for more than 24 hours.
•
For battery chargers that use a power cord, do not attach the charger or cord to other objects. Doing so could result in malfunction or damage to the product.
•
For details on charging time and the number of shots and recording time
possible with a fully charged battery pack, see “Number of Shots/Recording
•
Charged battery packs gradually lose their charge, even when they are not used. Charge the battery pack on (or immediately before) the day of use.
•
The charger can be used in areas with 100 – 240 V AC power (50/60 Hz). For power outlets in a different format, use a commercially available adapter for the plug. Never use an electrical transformer designed for traveling, which may damage the battery pack.
Inserting the Battery Pack and Memory Card
Insert the included battery pack and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted in another device), you should format the memory card with this camera
(
1
Open the cover.
z z
Terminals Battery
Lock
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
2
Insert the battery pack.
z z direction of the arrow, insert the battery pack as shown and push it in until it clicks into the locked position.
z z wrong way, it cannot be locked into the correct position. Always confirm that the battery pack is facing the right way and locks when inserted.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
13
Terminals
3
Check the card’s write-protect tab and insert the memory card.
z z cards with a write-protect tab when the tab is in the locked position. Slide the tab to the unlocked position.
z z until it clicks into the locked position.
z z right way when you insert it. Inserting memory cards facing the wrong way may damage the camera.
4
Close the cover.
z z you slide it, until it clicks into the closed position ( ).
•
For guidelines on how many shots or hours of recording can be saved on one
memory card, see “Number of 4:3 Shots per Memory Card” (
Removing the Battery Pack and Memory Card
Remove the battery pack.
z z lock in the direction of the arrow.
z z
Remove the memory card.
z z and then slowly release it.
z z
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
14
Setting the Date and Time
Set the current date and time correctly as follows if the [Date/Time] screen is displayed when you turn the camera on. Information you specify this way is recorded in image properties when you shoot, and it is used when you manage images by shooting date or print images showing the date.
You can also add a date stamp to shots, if you wish (
1
Turn the camera on.
z z z z
2
Set the date and time.
z z q><r> buttons to choose an option.
z z o><p> buttons to specify the date and time.
z z m> button.
4
Finish the setup process.
z z m> button when finished.
After a confirmation message, the setting screen is no longer displayed.
z z button.
•
Unless you set the date, time, and home time zone, the [Date/Time] screen will be displayed each time you turn the camera on. Specify the correct information.
•
To set daylight saving time (1 hour ahead), choose [ choose [ ] by pressing the < o><p> buttons.
] in step 2 and then
•
You can also set the date and time by touching the desired option on the screen in step 2 and then touching [ o][p], followed by [
]. Similarly, you can also set your home time zone by touching [ q][r] on the screen in step 3, followed by [ ].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
3
Set the home time zone.
z z q><r> buttons to choose your home time zone.
15
Changing the Date and Time
Adjust the date and time as follows.
1
Access the camera menu.
z z n> button.
2
Choose [Date/Time].
z z 3] tab.
z z o><p> buttons to choose
[Date/Time], and then press the < m> button.
3
Change the date and time.
z z
z z n> button to close the menu.
•
Date/time settings can be retained for about 3 weeks by the camera’s built-in date/time battery (backup battery) after the battery pack is removed.
•
The date/time battery will be charged in about 4 hours once you insert a charged battery pack or connect the camera to an AC adapter kit (sold
), even if the camera is left off.
•
Once the date/time battery is depleted, the [Date/Time] screen will be displayed when you turn the camera on. Set the correct date and time as
described in “Setting the Date and Time” (
Display Language
Change the display language as needed.
1
Enter Playback mode.
z z 1> button.
2
Access the setting screen.
z z m> button, and then immediately press the < n> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
16
3
Set the display language.
z z o><p><q><r> buttons to choose a language, and then press the
< m> button.
z z the setting screen is no longer displayed.
•
The current time is displayed if you wait too long in step 2 after pressing the
< m> button before you press the <n> button. In this case, press the
< m> button to dismiss the time display and repeat step 2.
•
You can also change the display language by pressing the < n> button and choosing [Language ] on the [
3] tab.
•
You can also set the display language by touching a language on the screen in step 3 and then touching it again.
Trying the Camera Out
Still Images Movies
Follow these instructions to turn the camera on, shoot still images or movies, and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions.
1
Turn the camera on.
z z z z
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
17
2
Enter [ ] mode.
z z 4].
z z camera will make a slight clicking noise as it determines the scene.
z z stabilization mode are displayed in the upper left of the screen.
z z subjects indicate that they are in focus.
3
Compose the shot.
z z the zoom lever toward < i> (telephoto), and to zoom away from the subject, move it toward < j> (wide angle).
4
Shoot.
Shooting Still Images
Focus.
z z down. The camera beeps twice after focusing, and AF frames are displayed to indicate image areas in focus.
z z move the < h> switch to raise the flash. It will fire when shooting. If you prefer not to use the flash, push it down with your finger, into the camera.
Shoot.
z z down.
z z is played, and in low-light conditions when you have raised the flash, it fires automatically.
z z sound ends.
z z revert to the shooting screen.
z z take another shot by pressing the shutter button again.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
18
Elapsed Time
Shooting Movies
Start shooting.
z z beeps once as recording begins, and
[ Rec] is displayed with the elapsed time.
z z bottom edges of the screen, and the subject is slightly enlarged. The black bars indicate image areas not recorded.
z z faces indicate that they are in focus.
z z off the movie button.
Finish shooting.
z z shooting. The camera beeps twice as recording stops.
•
You can make a short movie of the day (digest movie) just by shooting still images. When the mode switch is set to [ ], the camera automatically records a movie clip of the scene immediately before each shot (Hybrid Auto
)).
Viewing
After shooting images or movies, you can view them on the screen as follows.
1
Enter Playback mode.
z z
1> button.
z z
2
Browse through your images.
z z
< q> button. To view the next image, press the < r> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
19
Volume z z hold the < q><r> buttons for at least one second. In this mode, press the < q><r> buttons to browse through images.
z z the < m> button.
z z play movies, go to step 3.
] icon. To
3
Play movies.
z z m> button, press the
< o><p> buttons to choose [ ], and then press the < m> button again.
z z is finished, [
] is displayed.
z z o><p> buttons.
Touch-Screen Operations
z z the screen in step 2, and to view the previous image, drag right.
z z drag left or right repeatedly.
z z
] to start playback.
z z playback, quickly drag up or down across the screen.
Erasing Images
You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be recovered.
1
Choose an image to erase.
z z q><r> buttons to choose an image.
2
Erase the image.
z z m> button, press the
< o><p> buttons to choose [a], and then press the < m> button again.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
20
z z
< q><r> buttons to choose [Erase], and then press the < m> button.
z z z z q><r> buttons to choose [Cancel], and then press the < m> button.
•
You can also erase all images at once (
).
•
You can also erase the current image by touching [Erase] on the screen in step 2.
•
Images can also be erased by using Touch Actions (
).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
21
Advanced Guide
Camera Basics
Other basic operations and more ways to enjoy your camera, including shooting and playback options
On/Off ................................................................
Power-Saving Features (Auto Power Down) ........
Shutter Button ..................................................
Shooting Display Options ...............................
Using the FUNC. Menu ....................................
Using Menus .....................................................
On-Screen Keyboard .......................................
Indicator Display ..............................................
Clock .................................................................
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
22
On/Off
Shooting Mode
z z camera on and prepare for shooting.
z z button again.
Playback Mode
z z 1> button to turn the camera on and view your shots.
z z 1> button again.
•
To switch to Playback mode from Shooting mode, press the <
1> button.
•
To switch to Shooting mode from Playback mode, press the shutter button
•
The lens will be retracted after about one minute once the camera is in
Playback mode. You can turn the camera off when the lens is retracted by pressing the <
1> button.
Power-Saving Features (Auto Power Down)
As a way to conserve battery power, the camera automatically deactivates the screen (Display Off) and then turns itself off after a specific period of inactivity.
Power Saving in Shooting Mode
The screen is automatically deactivated after about one minute of inactivity.
In about two more minutes, the lens is retracted and the camera turns itself off. To activate the screen and prepare for shooting when the screen is off
but the lens is still out, press the shutter button halfway (
Power Saving in Playback Mode
The camera turns itself off automatically after about five minutes of inactivity.
•
You can deactivate Auto Power Down and adjust the timing of Display Off, if
•
Power saving is not active while the camera is connected to other devices via
117 ), or when connected to a computer (
).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
23
Shutter Button
To ensure your shots are in focus, always begin by holding the shutter button halfway down, and once the subject is in focus, press the button all the way down to shoot.
In this manual, shutter button operations are described as pressing the button halfway or all the way down.
1
Press halfway. (Press lightly to focus.)
z z camera beeps twice, and AF frames are displayed around image areas in focus.
2
Press all the way down. (From the halfway position, press fully to shoot.)
z z is played.
z z sound ends.
•
Images may be out of focus if you shoot without initially pressing the shutter button halfway.
•
Length of shutter sound playback varies depending on the time required for the shot. It may take longer in some shooting scenes, and images will be blurry if you move the camera (or the subject moves) before the shutter sound ends.
Shooting Display Options
Press the < p> button to view other information on the screen, or to hide
the information. For details on the information displayed, see “On-Screen
Information is displayed No information is displayed
•
Screen brightness is automatically increased by the night view function when you are shooting under low light, making it easier to check how shots are composed. However, on-screen image brightness may not match the brightness of your shots. Note that any on-screen image distortion or jerky subject motion will not affect recorded images.
•
For playback display options, see “Switching Display Modes” (
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
24
Using the FUNC. Menu
Configure commonly used functions through the FUNC. menu as follows.
Note that menu items and options vary depending on the shooting mode
(
–
).
Options
Menu Items
1
Access the FUNC. menu.
z z m> button.
2
Choose a menu item.
z z o><p> buttons to choose a menu item, and then press the < m> or
< r> button.
z z can be specified simply by pressing the
< m> or <r> button, or another screen is displayed for configuring the function.
3
Choose an option.
z z o><p> buttons to choose a menu item.
z z
] icon can be configured by pressing the < n> button.
z z
< q> button.
4
Finish the setup process.
z z m> button.
z z
< m> button in step 1 is displayed again, showing the option you configured.
•
To undo any accidental setting changes, you can restore the camera’s default
).
Using Touch-Screen Operations to Configure Settings
Options
Menu Items z z
< m> button, and then either drag the menu up or down to scroll it, or touch a menu item to choose it.
z z option again to confirm your choice and return to the screen displayed before you pressed the < m> button.
z z
[ labeled with a [
].
] icon by touching
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
25
Using Menus
Configure a variety of camera functions through other menus as follows.
Menu items are grouped by purpose on tabs, such as shooting [
4], playback [
1], and so on. Note that available menu items vary depending on the selected shooting or playback mode (
–
1
Access the menu.
z z n> button.
2
Choose a tab.
z z z z o><p> buttons to choose a tab initially, you can switch between tabs by pressing the
< q><r> buttons.
3
Choose a menu item.
z z o><p> buttons to choose a menu item.
z z first press the < m> or <r> button to switch screens, and then press the
< o><p> buttons to select the menu item.
z z the < n> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
4
Choose an option.
z z q><r> buttons to choose an option.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
5
Finish the setup process.
z z n> button to return to the screen displayed before you pressed the
< n> button in step 1.
Appendix
Index
•
To undo any accidental setting changes, you can restore the camera’s default
).
26
Touch-Screen Operations
•
To access tabs, press the < n> button to access the menu, and then touch the desired tab.
•
Drag the menu items up or down to scroll them, or touch a menu item to choose it.
•
Touch an option to choose it. Options shown with [ q][r] icons on either side can also be configured by touching these icons.
•
For menu items displayed with a bar to indicate the level, touch the desired position on the bar.
•
To configure menu items for which options are not shown, first touch the menu item to access the setting screen. On the setting screen, either drag or touch to choose the menu item, and then touch to choose the option. To return to the previous screen, touch [ ].
•
You can also touch input elements (such as check boxes or text fields) to select them, and you can enter text by touching the on-screen keyboard.
•
When [ ] is shown, you can touch [ button, if you prefer.
] instead of pressing the <
•
When [ ] is shown, you can touch [
< n> button, if you prefer.
] instead of pressing the
•
To dismiss the menu, press the < n> button again.
m>
On-Screen Keyboard
Use the on-screen keyboard to enter information for Face ID (
), and so on. Note that the length and type of information you can enter varies depending on the function you are using.
Number of Available
Characters
Entering Characters
z z z z varies depending on the function you are using.
Moving the Cursor
z z
] or [ ].
Entering Line Breaks
z z
].
Switching Input Modes
z z
[ ].
z z
] to enter capital letters.
z z the function you are using.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
27
Deleting Characters
z z
] to delete the previous character.
Confirming Input and Returning to the Previous Screen
z z n> button.
Indicator Display
The indicator on the back of the camera (
depending on the camera status.
Color
Green
Indicator
Status
On
Blinking
Camera Status
)
Starting up, recording/reading/transmitting images,
), or connecting/ transmitting via Wi-Fi
•
When the indicator blinks green, never do any of the following things, as they may corrupt images, or damage the camera or memory card.
- Turn the camera off
- Shake or jolt the camera
- Open the memory card/battery cover
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
28
Clock
You can check the current time.
z z m> button.
z z z z using the clock function, it will switch to vertical display. Press the < q><r> buttons to change the display color.
z z m> button again to cancel the clock display.
•
When the camera is off, press and hold the < m> button, then press the power button to display the clock.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
29
Auto Mode
Convenient mode for easy shots with greater control over shooting
Shooting with Camera-Determined
Settings ............................................................
Shooting (Smart Auto) ...........................................
Scene Icons ..........................................................
Image Stabilization Icons ......................................
On-Screen Frames ................................................
Common, Convenient Features ......................
Zooming In Closer on Subjects (Digital Zoom) .....
Using the Self-Timer..............................................
Shooting by Touching the Screen
(Touch Shutter) ......................................................
Adding a Date Stamp ............................................
Continuous Shooting .............................................
Using Face ID ...................................................
Registering Face ID Information ...........................
Shooting ................................................................
Checking and Editing Registered Information .......
Image Customization Features .......................
Changing the Aspect Ratio ....................................
Changing Image Resolution (Size) .......................
Red-Eye Correction ...............................................
Correcting Greenish Image Areas from Mercury
Lamps ...................................................................
Changing Movie Image Quality .............................
Helpful Shooting Features ..............................
Displaying Grid Lines ............................................
Magnifying the Area in Focus ................................
Checking for Closed Eyes .....................................
Customizing Camera Operation .....................
Deactivating the AF-Assist Beam ..........................
Deactivating the Red-Eye Reduction Lamp ..........
Changing the Image Display Style after Shots ......
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
30
Shooting with Camera-Determined
Settings
For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions.
Movies Still Images
Shooting (Smart Auto)
1
Turn the camera on.
z z z z
2
Enter [ ] mode.
z z 4].
z z m> button, press the
< o><p> buttons to choose [ then press the < m> button again.
], and z z o><p> buttons to choose
[ ], and then press the < m> button.
z z camera will make a slight clicking noise as it determines the scene.
z z stabilization mode are displayed in the upper left of the screen (
,
).
z z subjects indicate that they are in focus.
Zoom Bar
Before Use
3
Compose the shot.
z z the zoom lever toward < i> (telephoto), and to zoom away from the subject, move it toward < j> (wide angle). (A zoom bar showing the zoom position is displayed.)
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
4
Shoot.
Shooting Still Images
Focus.
z z camera beeps twice after focusing, and
AF frames are displayed to indicate image areas in focus.
z z multiple areas are in focus.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
31
Elapsed Time z z move the < h> switch to raise the flash. It will fire when shooting. If you prefer not to use the flash, push it down with your finger, into the camera.
Shoot.
z z down.
z z is played, and in low-light conditions when you have raised the flash, it fires automatically.
z z sound ends.
z z revert to the shooting screen.
Shooting Movies
Start shooting.
z z beeps once as recording begins, and
[ Rec] is displayed with the elapsed time.
z z bottom edges of the screen, and the subject is slightly enlarged. The black bars indicate image areas not recorded.
z z faces indicate that they are in focus.
z z off the movie button.
Resize the subject and recompose the shot as needed.
z z
note that the sound of camera operations will be recorded, and movies shot at zoom factors shown in blue will look grainy.
z z focus, brightness, and colors will be automatically adjusted.
Finish shooting.
z z shooting. The camera beeps twice as recording stops.
z z the memory card becomes full.
•
The flash firing during shots indicates that the camera has automatically attempted to ensure optimal colors in the main subject and background (Multiarea White Balance).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
32
Still Images/Movies
•
If the camera is turned on while the < p> button is held down, the camera will no longer sound. To activate sounds again, press the
< n> button and choose [Mute] on the [3] tab, and then press the < q><r> buttons to choose [Off].
Still Images
•
A blinking [ ] icon warns that images are more likely to be blurred by camera shake. In this case, mount the camera on a tripod or take other measures to keep it still.
•
If your shots are dark despite the flash firing, move closer to the
subject. For details on the flash range, see “Flash Range” (
•
The subject may be too close if the camera only beeps once when you press the shutter button halfway. For details on the focusing
range (shooting range), see “Shooting Range” (
•
To reduce red-eye and to assist in focusing, the lamp may be activated when shooting in low-light conditions.
•
A blinking [ h] icon displayed when you attempt to shoot indicates that shooting is not possible until the flash has finished recharging.
Shooting can resume as soon as the flash is ready, so either press the shutter button all the way down and wait, or release it and press it again.
•
The shutter sound will not be played when the Sleeping and Babies
(Sleeping) icons (
) are displayed.
•
Although you can shoot again before the shooting screen is displayed, your previous shot may determine the focus, brightness, and colors used.
•
You can change how long images are displayed after shots (
).
Movies
•
The camera may become warm when shooting movies repeatedly over an extended period. This does not indicate damage.
Microphone
•
Keep your fingers away from the microphone while shooting movies.
Blocking the microphone may prevent audio from being recorded or may cause the recording to sound muffled.
•
Avoid touching camera controls other than the movie button when shooting movies, because sounds made by the camera will be recorded.
•
Once movie recording begins, the image display area changes and subjects are enlarged to allow for correction of significant camera shake. To shoot subjects at the same size shown before shooting,
adjust the image stabilization setting (
•
Audio is recorded in stereo.
•
Distorted audio caused by recording when the wind is strong can be reduced.
However, the recording may sound unnatural when this option is used when there is no wind. When the wind is not strong, choose MENU (
4]
).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
33
Still Images Movies
Scene Icons
In [ ] mode, shooting scenes determined by the camera are indicated by the icon displayed, and corresponding settings are automatically selected for optimal focusing, subject brightness, and color. Depending on the scene, continuous images may be shot (
).
Background
Normal Backlit Dark* Sunsets Spotlights
Subject
People
–
In Motion
Shadows on Face
–
–
–
–
–
–
–
Smiling
Sleeping
– – –
–
–
–
–
–
–
Babies
Smiling
Sleeping
Children (In Motion)
Other Subjects
–
–
–
–
–
–
–
–
–
In Motion
At Close Range
– – –
– –
* Tripod Used
The background color of icons is light blue when the background is a blue sky, dark blue when the background is dark, and gray for all other backgrounds.
The background color of icons is light blue when the background is a blue sky, and gray for all other backgrounds.
•
The background color of [ ], [ ], [ ], [ ], and [ ] is dark blue, and the background color of [ ] is orange.
•
When shooting movies, only People, Other Subjects, and At Close Range icons will be displayed.
•
When shooting with the self-timer, People (In Motion), Smiling, Sleeping, Babies
(Smiling), Babies (Sleeping), Children, Other Subjects (In Motion) icons will not be displayed.
•
The following icons are not displayed in drive modes other than [ ] (
and when [Hg Lamp Corr.] is set to [On] and scenes are automatically corrected
(
49 ): Smiling, Sleeping, Babies (Smiling), Babies (Sleeping), and Children.
•
If the flash is set to [
], the Backlit icons for Smiling and Children will not be displayed.
•
Babies, Babies (Smiling), Babies (Sleeping), and Children icons will be displayed when [Face ID] is set to [On], and the face of a registered baby (under two years old) or child (from two to twelve years old) is detected (
the date and time are correct (
).
•
Try shooting in [
) if the scene icon does not match actual shooting conditions, or if it is not possible to shoot with your expected effect, color, or brightness.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
34
Continuous Shooting Scenes
If you shoot a still image when the following scene icons are displayed, the camera will shoot continuously. If you press the shutter button halfway when one of the icons in the table below is displayed, one of the following icons will be displayed to inform you that the camera will shoot continuous images: [ ], [ ], or [
W].
Smiling (including Babies)
Sleeping (including Babies)
Children
: Consecutive images are captured, and the camera analyzes details such as facial expressions to save the image determined to be the best.
: Beautiful shots of sleeping faces, created by combining consecutive shots to reduce camera shake and image noise.
The AF-assist beam will not light up, the flash will not fire, and the shutter sound will not be played.
W
: So you don’t miss a photo opportunity of children who move around, the camera will capture three consecutive images for each shot.
•
In some scenes, expected images may not be saved, and images may not look as expected.
•
Focus, image brightness, and color are determined by the first shot.
•
When you want to shoot single images only, press the < m> button, choose
[ ] in the menu, and then select [ ].
Still Images Movies
Image Stabilization Icons
Optimal image stabilization for the shooting conditions is automatically
[ applied (Intelligent IS). Additionally, the following icons are displayed in
] mode.
Image stabilization for still images (Normal)
Image stabilization for still images when panning*
(Panning)
Image stabilization for macro shots (Hybrid IS)
During movie recording,
[ ] is displayed, and image stabilization for macro movie recording is used.
Image stabilization for movies, reducing strong camera shake, as when shooting while walking
(Dynamic)
Image stabilization for slow camera shake, such as when shooting movies at telephoto
(Powered)
No image stabilization, because the camera is mounted on a tripod or held still by other means.
However, during movie recording, [ ] is displayed, and image stabilization to counteract wind or other sources of vibration is used (Tripod IS).
* Displayed when you pan, following moving subjects with the camera. When you follow subjects moving horizontally, image stabilization only counteracts vertical camera shake, and horizontal stabilization stops. Similarly, when you follow subjects moving vertically, image stabilization only counteracts horizontal camera shake.
•
To cancel image stabilization, set [IS Mode] to [Off] (
). In this case, an
IS icon is not displayed.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
35
Still Images Movies
On-Screen Frames
A variety of frames are displayed once the camera detects subjects you are aiming the camera at.
•
A white frame is displayed around the subject (or person’s face) determined by the camera to be the main subject, and gray frames are displayed around other detected faces. Frames follow moving subjects within a certain range to keep them in focus.
•
When you are pressing the shutter button halfway and the camera detects subject movement, a blue frame is displayed, and the focus and image brightness are constantly adjusted (Servo AF).
•
Try shooting in [
71 ) if no frames are displayed, if
frames are not displayed around desired subjects, or if frames are displayed on the background or similar areas.
•
To choose subjects to focus on, touch the desired subject on the screen. [ ] is displayed, and the camera enters Touch AF mode. Pressing the shutter button halfway will display a blue AF frame, and the camera will keep the subject in focus and image brightness adjusted (Servo AF).
•
Touch AF is not available when shooting movies.
Before Use
Common, Convenient Features
Still Images Movies
Zooming In Closer on Subjects (Digital Zoom)
When distant subjects are too far away to enlarge using the optical zoom, use digital zoom for up to about 20x enlargement.
Zoom Factor
1
Move the zoom lever toward
<
i>.
z z z z zoom factor (before the image becomes noticeably grainy), which is then indicated on the screen.
2
Move the zoom lever toward
<
i> again.
z z subject.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
36
•
Moving the zoom lever will display the zoom bar (which indicates the zoom position). The color of the zoom bar will change depending on the zoom range.
- White range: optical zoom range where the image will not appear grainy.
- Yellow range: digital zoom range where the image is not noticeably grainy (ZoomPlus).
- Blue range: digital zoom range where the image will appear grainy.
Because the blue range will not be available at some resolution settings (
), the maximum zoom factor can be achieved by following step 1.
•
To deactivate digital zoom, choose MENU (
) > [
4] tab > [Digital
Zoom] > [Off] (
Still Images Movies
Using the Self-Timer
With the self-timer, you can include yourself in group photos or other timed shots. The camera will shoot about 10 seconds after you press the shutter button.
1
Configure the setting.
z z m> button, choose [ ] in the menu, and then choose the [
]] option (
).
z z ]] is displayed.
2
Shoot.
z z halfway to focus on the subject, and then press it all the way down.
z z
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
37
z z will blink and the camera will play a selftimer sound.
z z and sound will speed up. (The lamp will z remain lit in case the flash fires.)
To cancel shooting after you have triggered the self-timer, press the
< n> button.
z z
[ ] in step 1.
Still Images Movies
Using the Self-Timer to Avoid Camera Shake
This option delays shutter release until about two seconds after you have pressed the shutter button. If the camera is unsteady while you are pressing the shutter button, it will not affect your shot.
z z
(
) and choose [
[].
z z [] is displayed.
z z
(
) to shoot.
Still Images Movies
Customizing the Self-Timer
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
1
Choose [
$].
z z
$] and press the
< n> button.
2
Configure the setting.
z z o><p> buttons to choose
[Delay] or [Shots].
z z q><r> buttons to choose a z value, and then press the < m> button.
Once the setting is complete, [
$] is displayed.
z z
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
•
For movies shot using the self-timer, [Delay] represents the delay before recording begins, but the [Shots] setting has no effect.
•
When you specify multiple shots, image brightness and white balance are determined by the first shot. More time is required between shots when the flash fires or when you have specified to take many shots. Shooting will stop automatically when the memory card becomes full.
•
When a delay longer than two seconds is specified, two seconds before the shot, the lamp blinking and self-timer sound will speed up. (The lamp will remain lit in case the flash fires.)
38
Still Images
Shooting by Touching the Screen (Touch
Shutter)
With this option, instead of pressing the shutter button, you can simply touch the screen and release your finger to shoot. The camera will focus on subjects and adjust image brightness automatically.
1
Enable touch-shutter function.
z z n> button, choose
[Touch Shutter] on the [
4] tab, and then
2
Shoot.
z z z then lift your finger immediately.
The camera shoots, as a shutter sound is played.
z z step 1.
•
Even while the shot is displayed, you can prepare for the next shot by touching [
^].
Still Images
Adding a Date Stamp
The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so confirm beforehand that the date and time are correct (
).
1
Configure the setting.
z z n> button, choose [Date
Stamp ] on the [
4] tab, and then choose the desired option (
z z
] is displayed.
2
Shoot.
z z shooting date or time to the lower-right corner of images.
z z
[Off] in step 1.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
•
Date stamps cannot be edited or removed.
39
•
Shots taken without adding a date stamp can be printed with one as follows.
However, adding a date stamp this way to images that already have one may cause it to be printed twice.
- Print using printer functions (
- Use camera DPOF print settings (
) to print
-
Use the software downloaded from the Canon website (
Still Images
Continuous Shooting
In [ ] mode, hold the shutter button all the way down to shoot continuously.
For details on the continuous shooting speed, see “Continuous Shooting
1
Configure the setting.
z z m> button, choose
[ ] in the menu, and then choose [
W]
(
).
z z W] is displayed.
•
During continuous shooting, focus and exposure are locked at the position/level determined when you pressed the shutter button halfway.
•
Cannot be used with the self-timer (
•
Shooting may stop momentarily or continuous shooting may slow down depending on shooting conditions, camera settings, and the zoom position.
•
As more shots are taken, shooting may slow down.
•
Shooting may slow down if the flash fires.
•
32 ) is not available. Similarly, [Hg
49 ) is set to [Off] and cannot be changed.
•
39 ), the camera shoots continuously
while you touch the screen. Focus and exposure during continuous shooting remain constant, after they are determined for the first shot.
Image Display during Playback
Each set of images shot continuously is managed as a single group, and only the first image in that group will be displayed. To indicate that the image is part of a group, [ ] is displayed in the upper left of the screen.
•
If you erase a grouped image (
101 ), all images in the group are
also erased. Be careful when erasing images.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
2
Shoot.
z z to shoot continuously.
40
•
Grouped images can be played back individually (
) and ungrouped
).
•
Protecting (
98 ) a grouped image will protect all images in the group.
•
Grouped images can be viewed individually when played back using Image
Search (
). In this case, images are temporarily ungrouped.
•
The following actions are not available for grouped images: editing Face ID
), magnifying (
), editing (
–
171 ), setting up individual image
printing (
), or adding to a photobook (
). To do these things, either view grouped images individually (
) first.
Using Face ID
If you register a person ahead of time, the camera will detect that person’s face, and prioritize focus, brightness, and color for that person when shooting. In [ ] mode, the camera can detect babies and children based on registered birthdays and optimize settings for them when shooting.
This function is also useful when searching for a specific registered person
among a large number of images (
Also initially register the shooter, whose face will be detected in Story
Camera shots.
Personal Information
•
Information such as images of a face (face info) registered with Face ID, and personal information (name, birthday) will be saved on the camera.
Additionally, when registered people are detected, their names will be recorded in still images. When using the Face ID function, be careful when sharing the camera or images with others, and when posting images online where many others can view them.
•
When disposing of a camera or transferring it to another person after using Face ID, be sure to erase all information (registered faces, names,
and birthdays) from the camera (
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
41
Registering Face ID Information
You can register information (face info, names, birthdays) for up to 12 people to use with Face ID.
1
Access the setting screen.
z z n> button, choose [Face
ID Settings] on the [
4] tab, and then press the <
z z o><p> buttons to choose
[Add to Registry], and then press the
< m> button.
z z o><p> buttons to choose
[Add a New Face], and then press the
< m> button.
2
Register face information.
z z person you want to register is inside the gray frame at the center of the screen.
z z indicates that the face is recognized.
Make sure a white frame is displayed on the face, and then shoot.
z z register face information.
z z
< q><r> buttons to choose [OK], and then press the < m> button.
z z
3
Register the person’s name and birthday.
z z m> button to access the keyboard, and then enter the name
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
42
z z screen, press the < o><p> buttons to choose [Birthday], and then press the z
< m> button.
Press the < q><r> buttons to choose an option.
z z o><p> buttons to specify the date.
z z m> button.
4
Save the settings.
z z o><p> buttons to choose z
[Save], and then press the < m> button.
After a message is displayed, press the
< q><r> buttons to choose [Yes], and then press the < m> button.
5
Continue registering face information.
z z information (expressions or angles), repeat step 2.
z z recognized if you add a variety of face information. In addition to a head-on angle, add a slight side angle, a shot when smiling, and shots inside and outside.
•
The flash will not fire when following step 2.
•
If you do not register a birthday in step 3, Babies or Children icons
34 ) will not be displayed in [
] mode.
•
Story Camera shots cannot be used to register face information.
•
You can overwrite registered face info, and add face info later if you have not
filled all 5 face info slots ( =
).
Shooting
If you register a person ahead of time, the camera will prioritize that person as the main subject, and optimize focus, brightness, and color for that person when shooting.
z z subject, the names of up to 3 registered people will be displayed when they are detected.
z z z z images. Even if people are detected, but their names are not displayed, the names
(up to 5 people) will be recorded in the image.
•
People other than those registered may be mistakenly detected as the registered person if they share similar facial features.
•
The shooter’s face ID information is not shown in the shooting screen sub-window (
), even if their face is recognized in
Story Camera shots.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
43
•
Registered people may not be correctly detected if the captured image or scene differs drastically from the registered face information.
•
If a registered face is not detected, or not easily detected, overwrite registered information with new face info. Registering face info right before shooting will allow for easier detection of registered faces.
•
If a person is mistakenly detected as another person and you continue shooting, you can edit or erase the name recorded in the image during
).
•
Because faces of babies and children change quickly as they grow, you should
update their face info regularly (
).
•
When information display is set to off (
), names will not display, but will be recorded in the image.
•
If you don’t want names to be recorded in still images, choose [Face ID
Settings] on the [
4] tab, choose [Face ID], and then choose [Off].
•
You can check names recorded in images in the playback screen (simple information display) (
).
•
Names recorded in continuous shooting (
recorded in the same position as for the first shot, even if subjects move.
Checking and Editing Registered Information
1
Access the [Check/Edit Info] screen.
z z
Edit Info] and press the < m> button.
2
Choose a person to check or edit.
z z o><p><q><r> buttons to choose the person to check or edit, and then press the < m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
44
3
Check or edit the information as needed.
z z
[Edit Profile] by pressing the < o><p> buttons, and then press the < m> button.
On the screen displayed, you can edit names or birthdays as described in step
3 of “Registering Face ID Information”
(
).
z z
< o><p> buttons to choose [Face Info
List], and then press the < m> button. To erase face information, press the < m> button on the screen displayed, press the < o><p><q><r> buttons to choose the face information to erase, and then press the < m> button. After [Erase?] is displayed, press the < q><r> buttons to choose [OK], and then press the < m> button.
•
Even if you change names in [Edit Profile], the names recorded in previously shot images will remain the same.
•
) to edit registered names. Some characters entered with the software may not display on the camera, but will be correctly recorded in images.
Overwriting and Adding Face Information
You can overwrite existing face information with new face info. You should update face information regularly, especially with babies and children, as their faces change quickly as they grow.
You can also add face information when all 5 face info slots have not been filled.
1
Access the [Add Face Info] screen.
z z
Info] and press the < m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
2
Choose the name of the person to overwrite.
z z o><p><q><r> buttons to choose the name of a person whose face info you want to overwrite, and then press the < m> button.
z z been registered, a message will be displayed. Choose [OK] by pressing the
< q><r> buttons, and then press the
< m> button.
z z registered, go to step 4 to add face information.
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
45
3
Choose the face info to overwrite.
z z o><p><q><r> buttons to choose the face info to overwrite, and then press the < m> button.
4
Register face information.
z z
Information” (
) to shoot, and then register the new face information.
z z recognized if you add a variety of face information. In addition to a head-on angle, add a slight side angle, a shot when smiling, and shots inside and outside.
•
You cannot add face information if all 5 information slots are filled. Follow the steps above to overwrite face information.
•
You can follow the above steps to register new face info when there is at least one slot open; however, you cannot overwrite any face information. Instead of overwriting face info, first erase unwanted existing info (
register new face information (
) as needed.
Erasing Registered Information
You can erase information (face info, names, birthdays) registered to Face
ID. However, names recorded in previously shot images will not be erased.
1
Access the [Erase Info] screen.
z z
Info].
2
Choose the name of the person whose info you want to erase.
z z o><p><q><r> buttons to choose the name of a person to erase, and then press the < m> button.
z z
< q><r> buttons to choose [OK], and then press the < m> button.
•
If you erase a registered person’s info, you will not be able to display their name (
search images for them (
).
•
You can also erase names in image information (
).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
46
Image Customization Features
Still Images
Changing the Aspect Ratio
Change the image aspect ratio (ratio of width to height) as follows.
z z m> button, choose [ ] in the menu, and choose the desired option
(
).
z z aspect ratio will be updated.
z z process but choose [ ].
Used for display on widescreen HDTVs or similar display devices.
Same aspect ratio as 35mm film, used for printing images at 5 x 7-inch or postcard sizes.
Native aspect ratio of the camera screen, also used for display on standarddefinition televisions or similar display devices, or for printing images at 3.5 x
5-inch or A-series sizes.
Square aspect ratio.
Still Images
Changing Image Resolution (Size)
Choose from 4 levels of image resolution, as follows. For guidelines on how many shots at each resolution setting can fit on a memory card, see
“Number of 4:3 Shots per Memory Card” (
z z m> button, choose [ ] in the menu, and choose the desired option
).
z z displayed.
z z process but choose [ ].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
47
Guidelines for Choosing Resolution Based on Paper
Size (for 4:3 Images)
A2 (16.5 x 23.4 in.) z z
]: For e-mailing images.
A3 – A5 (11.7 x
16.5 – 5.8 x 8.3 in.)
5 x 7 in.
Postcard
3.5 x 5 in.
Still Images
Red-Eye Correction
Red-eye that occurs in flash photography can be automatically corrected as follows.
1
Access the [Flash Settings] screen.
z z n> button, choose [Flash
Settings] on the [
4] tab, and then press the < m> button (
).
2
Configure the setting.
z z z choose [On] (
).
Once the setting is complete, [
R] is displayed.
z z process but choose [Off].
•
Red-eye correction may be applied to image areas other than eyes
(if the camera misinterprets red eye makeup as red pupils, for example).
•
You can also correct existing images (
).
•
You can also access the screen in step 2 when the flash is up by pressing the
< r> button and immediately pressing the <n> button.
•
You can also access the screen in step 2 when the flash is up by pressing the
< r> button and then touching [
].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
48
Still Images
Correcting Greenish Image Areas from
Mercury Lamps
In shots of evening scenes with subjects illuminated by mercury lamps, the subjects or background may appear to have a greenish tinge. This greenish tinge can be corrected automatically when shooting, using Multi-area White
Balance.
z z n> button, choose [Hg
Lamp Corr.] on the [
4] tab, and then
z z
] is displayed.
z z process but choose [Off].
•
After you are finished shooting under mercury lamps, you should set
[Hg Lamp Corr.] back to [Off]. Otherwise, green hues not caused by mercury lamps may be corrected by mistake.
•
Try taking some test shots first to make sure you obtain the desired results.
•
In continuous shooting (
), this setting is set to [Off] and cannot be changed.
Movies
Changing Movie Image Quality
3 image quality settings are available. For guidelines on the maximum movie length at each level of image quality that will fit on a memory card,
see “Recording Time per Memory Card” (
z z m> button, choose [ in the menu, and choose the desired option (
).
z z displayed.
z z process but choose [ ].
]
Image
Quality
Resolution
1920 x 1080* 1
Frame Rate Details
30 fps For shooting in Full HD
1280 x 720 30 fps For shooting in HD
640 x 480 30 fps
For shooting in standard definition
*1 Fine Detail Movie Processing (This function quickly processes a large amount of information, making it possible to record even finer details in movies.)
•
In [ ] and [ ] modes, black bars displayed on the top and bottom edges of the screen indicate image areas not recorded.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
49
Helpful Shooting Features
Still Images Movies
Displaying Grid Lines
Grid lines can be displayed on the screen for vertical and horizontal reference while shooting.
z z n> button, choose [Grid
Lines] on the [
4] tab, and then choose
[On] (
z z are displayed on the screen.
z z process but choose [Off].
•
Grid lines are not recorded in your shots.
Still Images
Magnifying the Area in Focus
You can check the focus by pressing the shutter button halfway, which will enlarge the portion of the image in focus in the AF frame.
1
Configure the setting.
z z n> button, choose [AF-
Point Zoom] on the [
4] tab, and then choose [On] (
).
2
Check the focus.
z z face detected as the main subject is now magnified.
z z
[Off] in step 1.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
•
The area in focus is not magnified in the following cases when the shutter button is pressed halfway.
- If a face was not detected, if the person is too close to the camera and their face is too large for the screen, or if the camera detects subject movement
- When digital zoom is used (
-
When a TV is used as a display (
50
Still Images
Checking for Closed Eyes
[ ] is displayed when the camera detects that people may have closed their eyes.
1
Configure the setting.
z z n> button, choose [Blink
Detection] on the [
4] tab, and then
2
Shoot.
z z ] flashes when the camera detects a person whose eyes are closed.
z z
[Off] in step 1.
•
When you have specified multiple shots in [ $] mode, this function is only available for the final shot.
•
A frame is displayed around people whose eyes are closed when you have selected [2 sec.], [4 sec.], [8 sec.], or [Hold] in [Display Time] (
•
This feature is not available during continuous shooting in [ ] mode
).
•
This feature is not available in continuous shooting mode (
,
Customizing Camera Operation
Customize shooting functions on the MENU [
4] tab as follows.
For instructions on menu functions, see “Using Menus” (
Still Images
Deactivating the AF-Assist Beam
You can deactivate the lamp that normally lights up to help you focus when you press the shutter button halfway in low-light conditions.
z z n> button, choose [AFassist Beam] on the [
4] tab, and then choose [Off] (
).
z z process but choose [On].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
51
Still Images
Deactivating the Red-Eye Reduction Lamp
You can deactivate the red-eye reduction lamp that lights up to reduce redeye when the flash is used in low-light shots.
1
Access the [Flash Settings] screen.
z z n> button, choose [Flash
Settings] on the [
4] tab, and then press the < m> button (
).
2
Configure the setting.
z z
z z process but choose [On].
Still Images
Changing the Image Display Style after Shots
You can change how long images are displayed and what information is displayed immediately after shooting.
Quick
2 sec.,
4 sec.,
8 sec.
Hold
Off
Changing the Image Display Period after Shots
1
Access the [Review image after shooting] screen.
z z n> button, choose
[Review image after shooting] on the
[
4] tab, and then press the <m> button
2
Configure the setting.
z z o><p> buttons to choose
[Display Time]. Press the < q><r> buttons to choose the desired option.
z z process but choose [Quick].
Displays images only until you can shoot again.
Displays images for the specified time. Even while the shot is displayed, you can take another shot by pressing the shutter button halfway again.
Displays images until you press the shutter button halfway.
No image display after shots.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
52
Changing the Screen Displayed after Shots
Change the way images are displayed after shots as follows.
1
Set [Display Time] to [2 sec.],
[4 sec.], [8 sec.], or [Hold]
).
Off
Detailed
2
Configure the setting.
z z o><p> buttons to choose
[Display Info]. Press the < q><r> buttons to choose the desired option.
z z process but choose [Off].
Displays only the image.
Displays shooting details (
).
•
) is set to [Off] or [Quick], [Display Info] is set to
[Off] and cannot be changed.
•
By pressing the < l> button while an image is displayed after shooting, you can switch the display information. Note that the settings of [Display Info] are not changed. By pressing the < m> button, you can do the following operations.
-
)
- Erase (
)
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
53
Hybrid Auto / Dual Capture Mode
Include your own reactions to shots, using the Story Camera
Shooting in Hybrid Auto Mode........................
Moving and Resizing the Sub-window ..................
Disabling the Story Camera ..................................
Including Your Own Reactions as You Shoot
(Dual Capture) .................................................
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
54
Still Images
Shooting in Hybrid Auto Mode
Movies
You can make a short movie of a day just by shooting still images. These digest movies include each shot, clips before the shots, and the shooter’s reactions before and after shooting, as recorded by the Story Camera.
To make albums (
) that include digest movies more enjoyable,
register subjects’ Face ID information (
1
Register Face ID information.
z z
Information” (
–
) to register
Face ID information for the shooter and subjects.
2
Enter [ ] mode.
z z
(
) and choose [ ].
z z
Camera, is displayed in the sub-window.
3
Compose the shot.
z z
Auto)” (
) to compose the shot and focus.
z z aim the camera at subjects about four seconds before shooting still images.
4
Shoot.
z z z
After the shutter sound is played, the image is displayed, and the shooter’s reaction to the shot is recorded as a
2-second movie.
z z digest movie chapter that you can play
•
Sub-window images are not added to still images.
•
Although names are not displayed on the shooting screen if you have registered Face ID information, the information is added to the images.
•
Sounds and vibrations from operating the camera will be recorded in digest movies.
•
Battery life is shorter in this mode than in [ digest movies are recorded for each shot.
] mode, because
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Sub-window
55
•
Digest movie quality is [
] and cannot be changed.
•
Sounds are not played when you press the shutter button halfway or trigger
•
Digest movies are saved as separate movie files in the following cases even if they were recorded on the same day in [ ] mode.
-
The digest movie file size reaches approximately 4 GB, or the total recording time reaches approximately 13 minutes and 20 seconds.
- The digest movie is protected (
- Daylight saving time (
) settings are changed.
- A new folder is created (
).
•
Recorded shutter sounds cannot be modified or erased.
•
Individual chapters can be edited (
).
•
Images in the sub-window are reversed, like mirror images, and this is how the image is recorded. If you prefer non-mirrored display and recording, choose
MENU (
4] tab > [Set Story Cam.] > [Non-Mirrored].
•
A scene icon is displayed (
34 ). However, only icons for People, Shadows
on Face, Other Subjects, and At Close Range are displayed.
•
An image stabilization icon is displayed (
displayed.
] icon is
Digest Movie Playback
Display a still image shot in [ ] mode to play a digest movie, or specify the
date of the digest movie to play (
Shooting Movies
Movies recorded when you press the movie button can include the shooter’s reactions, as shown in the sub-window.
Still Images
Moving and Resizing the Sub-window
You can move and resize the sub-window using touch operations.
Movies
1
Touch the sub-window
(
z z to orange.
2
Move the sub-window.
z z window again and drag it to one of the positions shown in light gray. Lift your finger once the sub-window is in place.
3
Resize the sub-window.
z z step 1, you can touch the sub-window repeatedly to cycle between small, medium, and large.
z z displayed again.
•
You can also move the sub-window by dragging it when the window outline changes from white to orange after you touch it in step 1.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
56
Disabling the Story Camera
Still Images Movies z z
Sub-window” to prepare the screen as shown at left.
z z
] icon in the upper right. A [ ] icon is now displayed in the lower right of the screen.
z z
[ ].
•
You can also configure this setting by choosing MENU (
4] tab >
[Story Camera].
•
You can also record digest movies without still images when the Story Camera
) > [
4] tab > [Digest Type] > [No Stills].
Still Images Movies
Including Your Own Reactions as You
Shoot (Dual Capture)
Include the shooter’s reactions as a clip accompanying shots as follows.
1
Enter [ ] mode.
z z
].
2
Shoot.
Shooting Still Images
z z
z z captured.
Shooting Movies
z z
z z recorded.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
57
•
The sub-window can be moved and resized (
•
The image resolution is [ ] and cannot be changed.
•
The movie quality is [
] and cannot be changed.
•
The sub-window is in a different position than in [ ] mode.
•
Images in the sub-window are reversed, like mirror images, and this is how the image is recorded. If you prefer non-mirrored display and recording, choose
MENU (
4] tab > [Set Story Cam.] > [Non-Mirrored].
•
Story Camera settings are configured automatically. Adjustments to shooting settings do not apply to these images.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
58
Other Shooting Modes
Shoot more effectively in various scenes, and take shots enhanced with unique image effects or captured using special functions
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Specific Scenes ................................................
Applying Special Effects .................................
Enjoying a Variety of Images from Each Shot
(Creative Shot) ......................................................
Shooting with a Fish-Eye Lens Effect
(Fish-Eye Effect) ...................................................
Shots Resembling Miniature Models
(Miniature Effect) ...................................................
Shooting with a Toy Camera Effect
(Toy Camera Effect) ..............................................
(Background Defocus) ..........................................
Shooting with a Soft Focus Effect .........................
Shooting in Monochrome ......................................
Special Modes for Other Purposes ................
Auto Shooting after Face Detection
(Smart Shutter) ......................................................
Shooting Long Exposures (Long Shutter) .............
Shooting Various Movies ................................
Shooting iFrame Movies .......................................
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
59
Specific Scenes
Choose a mode matching the shooting scene, and the camera will automatically configure the settings for optimal shots.
1
Enter [
4] mode.
z z 4].
2
Choose a shooting mode.
z z m> button, choose [
] in the menu, and then choose a shooting mode (
).
3
Shoot.
Still Images
I Shoot portraits (Portrait)
z z
Movies effect.
Still Images
Shoot evening scenes without using a tripod (Handheld
NightScene)
z z portraits with evening scenery in the background, without the need to hold the camera very still (as with a tripod).
z z consecutive shots, reducing camera shake and image noise.
Still Images Movies
P Shoot with snowy backgrounds
(Snow)
z z against snowy backgrounds.
Still Images Movies
t Shoot fireworks (Fireworks)
z z
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
60
•
Subjects appear larger in [ ] mode compared to other modes.
•
In [ ] mode, shots may look grainy because the ISO speed
(
) is increased to suit the shooting conditions.
•
Because the camera will shoot continuously in [ ] mode, hold it steady while shooting.
•
In [ ] mode, excessive motion blur or certain shooting conditions may prevent you from obtaining the desired results.
•
In [ t] mode, mount the camera on a tripod or take other measures to keep it still and prevent camera shake. Additionally, you should set [IS Mode] to [Off] when using a tripod or other means to secure
•
When you use a tripod for evening scenes, shooting in [
[
] mode will give better results (
).
] mode instead of
•
In [ t] mode, although no frames are displayed when you press the shutter button halfway, optimal focus is still determined.
Applying Special Effects
Add a variety of effects to images when shooting.
1
Choose a shooting mode.
z z
60 ) to choose a shooting mode.
2
Shoot.
Still Images Movies
Shoot in vivid colors (Super
Vivid)
z z
Still Images Movies
Posterized shots (Poster Effect)
z z illustration.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
•
In [ ] and [
] modes, try taking some test shots first, to make sure you obtain the desired results.
61
Still Images
Enjoying a Variety of Images from Each Shot
(Creative Shot)
The camera determines the subject and shooting conditions, automatically applying special effects and recomposing the shot to emphasize the subject. Six still images are recorded for each shot. You can capture multiple still images with effects using camera-determined settings.
1
Enter [ ] mode.
z z
(
) and choose [ ].
2
Shoot.
z z down. As you shoot, the shutter sound is played three times.
z z in succession, they are displayed simultaneously for about two seconds.
z z you press the shutter button halfway, press the < m> button. For full-screen display in this state, choose an image by pressing the < o><p><q><r> buttons, and then press the < m> button.
z z
< n> button.
•
The six images are managed together as a group (
).
•
Simultaneous display of the six images as shown in step 2 is only available immediately after you shoot.
•
Shooting will take some time when the flash fires, but hold the camera steady until the shutter sound is played three times.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Choosing Effects
You can choose effects for images captured in [ ] mode.
Still Images z z
] mode, press the < p> button.
z z q><r> buttons to choose the effect, and then press the < m> button.
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Auto
Retro
Monochrome
Special
Natural
All effects
Images resemble old photos
Images are generated in one color
Bold, distinctive-looking images
Subdued, natural-looking images
Setting Menu
Accessories
Appendix
Index
62
Still Images
Shooting with a Fish-Eye Lens Effect (Fish-
Eye Effect)
Shoot with the distorting effect of a fish-eye lens.
1
Choose [ ].
z z
(
) and choose [ ].
2
Choose an effect level.
z z p> button, press the
< q><r> buttons to choose an effect level, and then press the < m> button.
z z look with the effect applied.
3
Shoot.
•
Try taking some test shots first, to make sure you obtain the desired results.
Still Images
Shots Resembling Miniature Models
(Miniature Effect)
Movies
Creates the effect of a miniature model, by blurring image areas above and below your selected area.
You can also make movies that look like scenes in miniature models by choosing the playback speed before the movie is recorded. People and objects in the scene will move quickly during playback. Note that sound is not recorded.
1
Choose [ ].
z z
].
z z image area that will not be blurred.
2
Choose the area to keep in focus.
z z p> button.
z z and press the < o><p> buttons to move it.
3
For movies, choose the movie playback speed.
z z n> button, and then press the < q><r> buttons to choose the speed.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
63
4
Return to the shooting screen and shoot.
z z n> button to return to the shooting screen, and then shoot.
Playback Speed and Estimated Playback Time (for One-
Minute Clips)
Speed Playback Time
Approx. 12 sec.
Approx. 6 sec.
Approx. 3 sec.
•
The zoom is not available when shooting movies. Be sure to set the zoom before shooting.
•
Try taking some test shots first, to make sure you obtain the desired results.
•
To switch the orientation of the frame to vertical, press the < q><r> buttons in step 2. To return the frame to horizontal orientation, press the < o><p> buttons.
•
To move the frame when it is in horizontal orientation, press the < o><p> buttons, and to move the frame when it is in vertical orientation, press the
< q><r> buttons.
•
Holding the camera vertically will change the orientation of the frame.
•
Movie image quality is [
] at an aspect ratio of [ ] and [ ] at an aspect ratio of [
). These quality settings cannot be changed.
•
You can also move the frame by touching or dragging across the screen.
Still Images
Shooting with a Toy Camera Effect (Toy
Camera Effect)
This effect makes images resemble shots from a toy camera by vignetting
(darker, blurred image corners) and changing the overall color.
1
Choose [ ].
z z
].
2
Choose a color tone.
z z p> button, press the
< q><r> buttons to choose a color tone, and then press the < m> button.
z z look with the effect applied.
3
Shoot.
Standard Shots resemble toy camera images.
Warm Images have a warmer tone than with [Standard].
Cool Images have a cooler tone than with [Standard].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
•
Try taking some test shots first, to make sure you obtain the desired results.
64
Still Images
Making Subjects Stand Out (Background
Defocus)
You can shoot subjects so that they stand out from the background. Two consecutive images are captured, and the camera determines whether to defocus the background through scene-based lens effects or through image processing.
1
Choose [ ].
z z
(
) and choose [ ].
2
Shoot.
z z
Two consecutive images are captured when you press the shutter button all the way down.
z z
] icon indicates that the images could not be processed.
•
Excessive motion blur or certain shooting conditions may prevent you from obtaining the desired results.
•
For the best results with this effect, try shooting close to the subject, and ensure ample distance between the subject and background.
•
There may be a delay after shooting before you can shoot again.
Still Images
Shooting with a Soft Focus Effect
This function allows you to shoot images as if a soft focus filter were attached to the camera. You can adjust the effect level as desired.
1
Choose [ ].
z z
].
2
Choose an effect level.
z z p> button, press the
< q><r> buttons to choose an effect level, and then press the < m> button.
z z look with the effect applied.
3
Shoot.
•
Try taking some test shots first, to make sure you obtain the desired results.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
65
Still Images
Shooting in Monochrome
Shoot images in black and white, sepia, or blue and white.
B/W
Sepia
Blue
Movies
1
Choose [ ].
z z
(
) and choose [ ].
2
Choose a color tone.
z z p> button, press the
< q><r> buttons to choose a color tone, and then press the < m> button.
z z look with the effect applied.
Black and white shots.
Sepia tone shots.
Blue and white shots.
3
Shoot.
Special Modes for Other Purposes
Still Images
Auto Shooting after Face Detection (Smart
Shutter)
Auto Shooting after Smile Detection
The camera shoots automatically after detecting a smile, even without you pressing the shutter button.
1
Choose [ ].
z z
], and then press the < p> button.
z z q><r> buttons to choose z
[ ], and then press the < m> button.
The camera now enters shooting standby mode, and [Smile Detection on] is displayed.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
66
2
Aim the camera at a person.
z z will shoot after the lamp lights up.
z z q> button. Press the < q> button again to resume detection.
No. of Shots, Mode Switching
)
•
Switch to another mode when you finish shooting, or the camera will continue shooting each time a smile is detected.
•
You can also shoot as usual by pressing the shutter button.
•
The camera can detect smiles more easily when subjects face the camera and open their mouth wide enough so that teeth are visible.
•
To change the number of shots, press the < o><p> buttons after choosing
[
] in step 1. [Blink Detection] (
) is only available for the final shot.
•
You can also choose the shooting mode by choosing [ ] in steps 1 – 2 of
“Specific Scenes” (
] to access the setting screen, touching [ ], and then touching the same option or [ ].
Still Images
Using the Wink Self-Timer
Aim the camera at a person and press the shutter button all the way down.
The camera will shoot about two seconds after a wink is detected.
1
Choose [ ].
z z
], and then press the < p> button.
z z q><r> buttons to choose
[ ], and then press the < m> button.
2
Compose the shot and press the shutter button halfway.
z z person who will wink to choose it (Touch
AF), and then press the shutter button halfway.
z z around the face of the person who will wink.
3
Press the shutter button all the way down.
z z mode, and [Wink to take picture] is displayed.
z z is played.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
67
4
Face the camera and wink.
z z after detecting a wink by the person whose face is inside the frame.
z z triggered the self-timer, press the
< n> button.
•
If the wink is not detected, wink again slowly and deliberately.
•
Winking may not be detected if eyes are obscured by hair, a hat, or glasses.
•
Closing and opening both eyes at once will also be detected as a wink.
•
If winking is not detected, the camera will shoot about 15 seconds later.
•
To change the number of shots, press the < o><p> buttons after choosing
[
] in step 1. [Blink Detection] (
) is only available for the final shot.
•
If no one is in the shooting area when the shutter button is pressed all the way down, the camera will shoot after a person enters the shooting area and winks.
•
You can also choose the shooting mode by choosing [ ] in steps 1 – 2 of
“Specific Scenes” (
] to access the setting screen, touching [ ], and then touching the same option or [ ].
Still Images
Using the Face Self-Timer
The camera will shoot about two seconds after detecting that the face of another person (such as the photographer) has entered the shooting area
(
79 ). This is useful when including yourself in group photos or similar
shots.
1
Choose [ ].
z z
], and then press the < p> button.
z z q><r> buttons to choose
[ ], and then press the < m> button.
2
Compose the shot and press the shutter button halfway.
z z around the face you focus on and white frames around other faces.
3
Press the shutter button all the way down.
z z mode, and [Look straight at camera to start count down] is displayed.
z z is played.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
68
4
Join the subjects in the shooting area and look at the camera.
z z lamp blinking and self-timer sound will speed up. (When the flash fires, the lamp will remain lit.) About two seconds later, the camera will shoot.
z z triggered the self-timer, press the
< n> button.
•
Even if your face is not detected after you join the others in the shooting area, the camera will shoot about 15 seconds later.
•
To change the number of shots, press the < o><p> buttons after choosing
[
] in step 1. [Blink Detection] (
) is only available for the final shot.
•
You can also choose the shooting mode by choosing [ ] in steps 1 – 2 of
“Specific Scenes” (
] to access the setting screen, touching [ ], and then touching the same option or [ ].
Still Images
Shooting Long Exposures (Long Shutter)
Specify a shutter speed of 1 – 15 seconds to shoot long exposures. In this case, mount the camera on a tripod or take other measures to prevent camera shake.
1
Choose [
N].
z z
N].
2
3
Choose the shutter speed.
z z o> button, press the
< q><r> buttons to choose the shutter speed, and then press the < m> button.
Check the exposure.
z z the exposure for your selected shutter speed.
4
Shoot.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
69
•
On-screen image brightness in step 3, when you pressed the shutter button halfway, may not match the brightness of your shots.
•
With shutter speeds of 1.3 seconds or slower, there will be a delay before you can shoot again, as the camera processes images to reduce noise.
•
Set [IS Mode] to [Off] when using a tripod or other means to secure
•
If the flash fires, your shot may be overexposed. In this case, set the flash to
[
!] and shoot again (
).
Movies
Shooting Various Movies
Movies
Shooting iFrame Movies
Shoot movies that can be edited with iFrame-compatible software or devices. You can quickly edit, save, and manage your iFrame movies using
).
1
Choose [ ].
z z
].
z z bottom edges of the screen, and the subject is slightly enlarged. The black bars indicate image areas not recorded.
2
Shoot.
z z z z button again.
•
The resolution is [ ] (
•
iFrame is a video format developed by Apple Inc.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
70
P Mode
More discerning shots, in your preferred shooting style
•
•
•
[
Instructions in this chapter apply to the camera in [
G]: Program AE; AE: Auto Exposure
G] mode, with the mode switch set to <4>.
Before using a function introduced in this chapter in modes other than [
G], make sure the function is available in that mode ( =
–
).
Shooting in Program AE ([P] Mode) ...............
Image Brightness (Exposure) .........................
(Exposure Compensation) ....................................
Locking Image Brightness / Exposure
(AE Lock) ..............................................................
Changing the Metering Method .............................
Changing the ISO Speed ......................................
Correcting Image Brightness (i-Contrast) ..............
Image Colors ....................................................
Adjusting White Balance .......................................
Changing Image Color Tones (My Colors) ............
Shooting Range and Focusing .......................
Shooting Close-Ups (Macro) .................................
Shooting Distant Subjects (Infinity) .......................
Digital Tele-Converter ............................................
Changing the AF Frame Mode ..............................
Changing the Focus Setting ..................................
Choosing Subjects to Focus On (Touch AF) .........
Shooting with the AF Lock .....................................
Shooting Continuously as the Camera Keeps the
Subject in Focus ....................................................
Flash ..................................................................
Changing the Flash Mode .....................................
Shooting with the FE Lock ....................................
Other Settings ..................................................
Changing the Compression Ratio
(Image Quality) ......................................................
Changing the IS Mode Settings ............................
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
71
Still Images
1
Enter [
G] mode.
z z
(
) and choose [
G].
Movies
Shooting in Program AE ([P] Mode)
You can customize many function settings to suit your preferred shooting style.
2
Customize the settings as
), and then shoot.
•
If adequate exposure cannot be obtained when you press the shutter button halfway, shutter speeds and aperture values are displayed in orange. In this case, try adjusting the ISO speed (
) or activating the flash (if subjects
), which may enable adequate exposure.
•
Movies can be recorded in [
G] mode as well, by pressing the movie button.
However, some FUNC. (
) settings may be automatically adjusted for movie recording.
•
For details on the shooting range in [
Image Brightness (Exposure)
Still Images
Adjusting Image Brightness (Exposure
Compensation)
Movies
The standard exposure set by the camera can be adjusted in 1/3-stop increments, in a range of –2 to +2.
z z o> button. As you watch the screen, press the < q><r> buttons to adjust brightness, and then press the
< m> button.
z z displayed.
z z exposure compensation bar displayed.
•
You can also shoot still images with exposure compensation bar displayed.
•
While recording a movie, [
&] is displayed, and the exposure is locked.
•
You can also adjust brightness by pressing the < o> button, and then touching or dragging the bar.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
72
Still Images Movies
Locking Image Brightness / Exposure (AE
Lock)
Before shooting, you can lock the exposure, or you can specify focus and exposure separately.
1
Deactivate the flash (
2
Lock the exposure.
z z with the exposure locked. With the shutter button pressed halfway, press the
< o> button.
z z locked.
z z and press the < o> button again. In this case, [
&] is no longer displayed.
3
Compose the shot and shoot.
•
AE: Auto Exposure
Still Images
Changing the Metering Method
Adjust the metering method (how brightness is measured) to suit shooting conditions as follows.
z z m> button, choose [ ] in the menu, and choose the desired option
).
z z displayed.
Evaluative
For typical shooting conditions, including backlit shots.
Automatically adjusts exposure to match the shooting conditions.
Center
Weighted Avg.
Determines the average brightness of light across the entire image area, calculated by treating brightness in the central area as more important.
Spot
Metering restricted to within the [ ] (Spot AE Point frame), displayed in the center of the screen. Note that in [1-point]
(
78 ) AF frame mode, the Spot AE Point frame links to the
AF frame.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
73
Still Images
Changing the ISO Speed
z z m> button, choose [ ] in the menu, and choose the desired option z
(
).
The option you configured is now displayed.
AUTO
80, 100, 200
400, 800
1600, 3200, 6400
Automatically adjusts the ISO speed to suit the shooting mode and conditions.
For shooting outdoors in fair weather.
Low
High
For shooting in cloudy conditions, or at twilight.
For shooting night scenes, or in dark rooms.
•
To view the automatically determined ISO speed when you have set the ISO speed to [AUTO], press the shutter button halfway.
•
Although choosing a lower ISO speed may reduce image graininess, there may be a greater risk of subject and camera shake in some shooting conditions.
•
Choosing a higher ISO speed will increase shutter speed, which may reduce subject and camera shake and increase the flash range. However, shots may look grainy.
Still Images
Correcting Image Brightness (i-Contrast)
Before shooting, excessively bright or dark image areas (such as faces or backgrounds) can be detected and automatically adjusted to the optimal brightness. Insufficient overall image contrast can also be automatically corrected before shooting to make subjects stand out better.
z z n> button, choose
[i-Contrast] on the [
4] tab, and then choose [Auto] (
z z @] is displayed.
•
Under some shooting conditions, correction may be inaccurate or may cause images to appear grainy.
•
You can also correct existing images (
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
74
Image Colors
Still Images Movies
Adjusting White Balance
By adjusting white balance (WB), you can make image colors look more natural for the scene you are shooting.
z z m> button, choose [ ] in the menu, and choose the desired option z
(
).
The option you configured is now displayed.
Auto
Day Light
Automatically sets the optimal white balance for the shooting conditions.
For shooting outdoors in fair weather.
Cloudy
Tungsten
Fluorescent
Fluorescent H
Custom
For shooting in cloudy conditions, in the shade, or at twilight.
For shooting under ordinary incandescent (tungsten) lighting and similarly colored fluorescent lighting.
For shooting under warm-white (or similarly colored) or coolwhite fluorescent lighting.
For shooting under daylight fluorescent and similarly colored fluorescent lighting.
For manually setting a custom white balance (
Still Images Movies
Custom White Balance
For image colors that look natural under the light in your shot, adjust white balance to suit the light source where you are shooting. Set the white balance under the same light source that will illuminate your shot.
z z
].
z z so that the entire screen is white. Press z the < n> button.
The tint of the screen changes once the white balance data has been recorded.
•
Colors may look unnatural if you change camera settings after recording white balance data.
•
You can also record white balance data on the screen above by touching
[ ].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
75
Still Images Movies
Changing Image Color Tones (My Colors)
Change image color tones as desired, such as converting images to sepia or black and white.
z z m> button, choose [ ] in the menu, and choose the desired option
(
).
z z displayed.
My Colors Off
Vivid
Neutral
Sepia
B/W
Positive Film
Lighter Skin Tone
Darker Skin Tone
Vivid Blue
Vivid Green
Vivid Red
–
Emphasizes contrast and color saturation, making images sharper.
Tones down contrast and color saturation for subdued images.
Creates sepia tone images.
Creates black and white images.
Combines the effects of Vivid Blue, Vivid Green, and
Vivid Red to produce intense yet natural-looking colors resembling images on positive film.
Lightens skin tones.
Darkens skin tones.
Emphasizes blues in images. Makes the sky, ocean, and other blue subjects more vivid.
Emphasizes greens in images. Makes mountains, foliage, and other green subjects more vivid.
Emphasizes reds in images. Makes red subjects more vivid.
Custom Color
Adjust contrast, sharpness, color saturation, and other
).
•
White balance (
) cannot be set in [ ] or [ ] modes.
•
With [ ] and [ ] modes, colors other than people’s skin tone may change. These settings may not produce the expected results with some skin tones.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
76
Still Images Movies
Custom Color
Choose the desired level of image contrast, sharpness, color saturation, red, green, blue, and skin tones in a range of 1 – 5.
1
Access the setting screen.
z z
choose [ ], and then press the < n> button.
2
Configure the setting.
z z o><p> buttons to choose an option, and then specify the value by pressing the < q><r> buttons.
z z darker skin tones), adjust the value to the right, and for weaker/lighter effects
(or lighter skin tones), adjust the value to the left.
z z n> button to complete the setting.
•
You can also specify a value by touching or dragging the bar.
Before Use
Shooting Range and Focusing
Still Images
Shooting Close-Ups (Macro)
To restrict the focus to subjects at close range, set the camera to [ e]. For
details on the focusing range, see “Shooting Range” (
Basic Guide
Advanced Guide
Camera Basics
z z q> button, press the <q><r> buttons to choose [ e], and then press the < m> button.
z z e] is displayed.
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
•
If the flash fires, vignetting may occur.
•
With the AF frame mode set to [Face AiAF], using Touch Shutter returns the camera to [ ].
•
To prevent camera shake, try mounting the camera on a tripod and shooting with the camera set to [
[] (
•
You can also configure this setting by pressing the < q> button, touching [e], and then touching it again.
Setting Menu
Accessories
Appendix
Index
77
Still Images
Shooting Distant Subjects (Infinity)
To restrict the focus to distant subjects, set the camera to [ u]. For details
on the focusing range, see “Shooting Range” (
z z q> button, press the <q><r> buttons to choose [ u], and then press the < m> button.
z z u] is displayed.
Still Images Movies
Digital Tele-Converter
The focal length of the lens can be increased by approximately 1.5x or 2.0x.
This can reduce camera shake because the shutter speed is faster than it would be if you zoomed (including using digital zoom) in to the same zoom factor.
z z n> button, choose
[Digital Zoom] on the [
4] tab, and then choose the desired option (
).
z z is displayed on the screen.
Before Use
•
The shutter speed may be equivalent when you move the zoom lever all the way toward < i> for maximum telephoto, and when you zoom in to enlarge the subject to the same size following step 2 in “Zooming In Closer on Subjects
(Digital Zoom)” (
Movies Still Images
Changing the AF Frame Mode
Change the AF (auto focus) frame mode to suit the shooting conditions as follows.
z z n> button, choose [AF
Frame] on the [
4] tab, and then choose the desired option (
).
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Still Images Movies
1-point
One AF frame is displayed. Effective for reliable focusing. You can also move the frame by touching the screen (
).
•
A yellow AF frame is displayed with [ ] if the camera cannot focus when you press the shutter button halfway.
Setting Menu
Accessories
Appendix
Index
•
The digital tele-converter cannot be used with digital zoom
(
) or AF-point zoom (
).
78
•
To reduce the AF frame size, press the < n> button and set [AF Frame
Size] on the [
4] tab to [Small] (
•
To compose shots so that subjects are positioned at the edge or in a corner, first aim the camera to capture the subject in an AF frame, and then hold the shutter button halfway down. As you continue to hold the shutter button halfway, recompose the shot as desired, and then press the shutter button all the way down (Focus Lock).
•
The AF frame position is enlarged when you press the shutter button halfway and [AF-Point Zoom] (
Still Images Movies
Face AiAF
•
Detects people’s faces, and then sets the focus, exposure (evaluative metering only), and white balance ([ ] only).
•
After you aim the camera at the subject, a white frame is displayed around the person’s face determined by the camera to be the main subject, and up to two gray frames are displayed around other detected faces.
•
When the camera detects movement, frames will follow moving subjects, within a certain range.
•
After you press the shutter button halfway, up to nine green frames are displayed around faces in focus.
Before Use
•
If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in the areas in focus when you press the shutter button halfway.
•
If faces are not detected when Servo AF (
) is set to [On], the
AF frame is displayed in the center of the screen when you press the shutter button halfway.
•
Examples of faces that cannot be detected:
- Subjects that are distant or extremely close
- Subjects that are dark or light
-
Faces in profile, at an angle, or partly hidden
•
The camera may misinterpret non-human subjects as faces.
•
No AF frames are displayed if the camera cannot focus when you press the shutter button halfway.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
79
Still Images
Shooting with Servo AF
This mode helps avoid missing shots of subjects in motion, because the camera continues to focus on the subject and adjust the exposure as long as you press the shutter button halfway.
1
Configure the setting.
z z n> button, choose
[Servo AF] on the [
4] tab, and then
2
Focus.
z z where the blue AF frame is displayed while you are pressing the shutter button halfway.
•
Focusing may not be possible in some shooting conditions.
•
In low-light conditions, Servo AF may not be activated (AF frames may not turn blue) when you press the shutter button halfway. In this case, the focus and exposure are set according to the specified AF frame mode.
•
If adequate exposure cannot be obtained, shutter speeds and aperture values are displayed in orange. Release the shutter button, and then press it halfway again.
•
AF lock shooting is not available.
•
[AF-Point Zoom] on the [
•
Not available when using the self-timer (
Before Use
Still Images
Changing the Focus Setting
You can change default camera operation of constantly focusing on subjects it is aimed at, even when the shutter button is not pressed. Instead, you can limit camera focusing to the moment you press the shutter button halfway.
Basic Guide
Advanced Guide
Camera Basics
z z n> button, choose
[Continuous AF] on the [
4] tab, and then choose [Off] (
).
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
On
Off
Helps avoid missing sudden photo opportunities, because the camera constantly focuses on subjects until you press the shutter button halfway.
Conserves battery power, because the camera does not focus constantly.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
80
Still Images Movies
Choosing Subjects to Focus On (Touch AF)
You can shoot after choosing a person’s face or another subject to focus on.
1
Set the AF frame to [Face AiAF]
).
2
Choose a person’s face or another subject to focus on.
z z screen.
z z beeps and [ ] is displayed. Focus is maintained even if the subject moves.
z z ^].
3
Shoot.
z z the camera focuses, [ ] changes to a green [ ].
z z to shoot.
Before Use
•
If you prefer the camera not to shoot when you touch the screen, make sure [Touch Shutter] mode is deactivated. Press the < n> button, choose [Touch Shutter] on the [
4] tab, and then choose
•
Tracking may not be possible when subjects are too small or move too rapidly, or when there is inadequate contrast between subjects and the background.
•
Even if you are shooting in [ e] mode (
), the camera will revert to [ ] mode if you touch the screen to specify where to focus.
•
If [Face ID] is set to [On], names will not display when registered people are detected, but the names will be recorded in the still images (
). However, a name will display if the subject chosen to focus on is the same as a person detected with Face ID.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
81
Shooting with the AF Lock
Still Images Movies
The focus can be locked. After you lock the focus, the focal position will not change even when you release your finger from the shutter button.
1
Lock the focus.
z z press the < q> button.
z z %] is displayed.
z z button and press the < q> button again. In this case, [
%] is no longer displayed.
2
Compose the shot and shoot.
•
Cannot be used with Touch Shutter (
).
Still Images
Shooting Continuously as the Camera Keeps the Subject in Focus
Shoot continuously as the camera keeps the subject in focus. For details
on the continuous shooting speed, see “Continuous Shooting Speed”
1
Configure the setting.
z z m> button, choose
[ ] in the menu, and then choose [ ]
z z
] is displayed.
2
Shoot.
z z to shoot continuously.
z z group (
•
In [ t] mode (
) or AF lock (
), [ ] is changed to [ ].
•
Cannot be used with the self-timer (
•
Shooting may stop momentarily or continuous shooting may slow down depending on shooting conditions, camera settings, and the zoom position.
•
As more shots are taken, shooting may slow down.
•
Shooting may slow down if the flash fires.
•
39 ), the camera shoots continuously while
you touch the screen.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
82
Flash
Still Images
Changing the Flash Mode
You can change the flash mode to match the shooting scene. For details on
the flash range, see “Flash Range” ( =
1
Raise the flash.
z z h> switch.
2
Configure the setting.
z z r> button, press the <q><r> buttons to choose a flash mode, and then press the < m> button.
z z displayed.
•
The setting screen cannot be accessed by pressing the < r> button when the flash is lowered. Move the < h> switch to raise the flash, then configure the setting.
[ ] Auto
Fires automatically in low-light conditions.
[
h] On
Fires for each shot.
[
Z] Slow Synchro
Fires to illuminate the main subject (such as people) while shooting at a slower shutter speed to illuminate backgrounds out of flash range.
•
In [
Z] mode, mount the camera on a tripod or take other measures to keep it still and prevent camera shake. Additionally, you should set [IS Mode] to [Off] when using a tripod or other means to secure the camera (
).
•
In [
Z] mode, even after the flash fires, ensure that the main subject does not move until the shutter sound is finished playing.
[
!] Off
For shooting without the flash.
•
If a blinking [ ] icon is displayed when you press the shutter button halfway in camera-shake inducing, low-light conditions, mount the camera on a tripod or take other measures to keep it still.
•
Adjustment is also possible by pressing the < r> button, touching the desired option, and then touching it again.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
83
Still Images
Shooting with the FE Lock
Just as with the AE lock (
), you can lock the exposure for the flash shots.
1
Raise the flash and set it to [h]
).
2
Lock the flash exposure.
z z with the exposure locked. With the shutter button pressed halfway, press the
< o> button.
z z (] is displayed, the flash output level is retained.
z z and press the < o> button again. In this case, [
(] is no longer displayed.
3
Compose the shot and shoot.
•
FE: Flash Exposure
Other Settings
Still Images
Changing the Compression Ratio (Image
Quality)
Choose from two compression ratios, [ ] (Super Fine) and [ ] (Fine), as follows. For guidelines on how many shots at each compression ratio can fit
on a memory card, see “Number of 4:3 Shots per Memory Card” (
z z m> button, choose [ ] in the menu, and choose the desired option
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
84
Still Images
Changing the IS Mode Settings
Movies
1
Access the setting screen.
z z n> button, choose [IS
Settings] on the [
4] tab, and then press the < m> button (
).
2
Configure the setting.
z z
Continuous
Optimal image stabilization for the shooting conditions is automatically
).
Shoot Only* Image stabilization is active only at the moment of shooting.
Off Deactivates image stabilization.
* The setting is changed to [Continuous] for movie recording.
•
If image stabilization cannot prevent camera shake, mount the camera on a tripod or take other measures to hold it still. In this case, set [IS Mode] to [Off].
Movies
Shooting Movies with Subjects at the Same Size Shown before Shooting
Normally, once movie recording begins, the image display area changes and subjects are enlarged to allow for correction of significant camera shake. To shoot subjects at the same size shown before shooting, you can choose not to reduce significant camera shake.
z z
[IS Settings] screen.
z z
[2] (
).
•
You can also set [IS Mode] to [Off], so that subjects are recorded at the same size shown before shooting.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
85
Playback Mode
Have fun reviewing your shots, and browse or edit them in many ways
•
To prepare the camera for these operations, press the <
•
1> button to enter Playback mode.
It may not be possible to play back or edit images that were renamed or already edited on a computer, or images from other cameras.
Viewing ..............................................................
Switching Display Modes ......................................
Viewing Short Movies Created When
Shooting Still Images (Digest Movies) ..................
Checking People Detected in Face ID ..................
Browsing and Filtering Images .......................
Navigating through Images in an Index.................
Finding Images Matching Specified Conditions ....
Viewing Individual Images in a Group ...................
Editing Face ID Information ............................
Image Viewing Options ....................................
Magnifying Images ................................................
Viewing Slideshows ..............................................
Auto Playback of Related Images
(Smart Shuffle) ......................................................
Protecting Images ............................................
Using the Menu .....................................................
Choosing Images Individually ...............................
Selecting a Range .................................................
Specifying All Images at Once ............................
Erasing Images ...............................................
Erasing Multiple Images at Once ........................
Rotating Images .............................................
Using the Menu ...................................................
Deactivating Auto Rotation ..................................
Tagging Images as Favorites ........................
Using the Menu ...................................................
Convenient Control: Touch Actions .............
Using a Function Assigned to [ ] ......................
Changing Touch Actions Functions .....................
Editing Still Images ........................................
Resizing Images ..................................................
Cropping ..............................................................
Changing Image Color Tones (My Colors) ..........
Correcting Image Brightness (i-Contrast) ............
Correcting Red-Eye ..............................................
Editing Movies ................................................
Reducing File Sizes ............................................
Editing Digest Movies ..........................................
Viewing Albums (Story Highlights) ..............
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
86
2
Still Images Movies
Viewing
After shooting images or movies, you can view them on the screen as follows.
1
Enter Playback mode.
z z 1> button.
z z
Browse through your images.
z z
< q> button. To view the next image, press the < r> button.
z z hold the < q><r> buttons for at least one second. In this mode, press the < q><r> buttons to browse through images.
z z the < m> button.
z z date, press the < o><p> buttons in
Scroll Display mode.
Volume Indicator z z play movies, go to step 3.
] icon. To
Before Use
Basic Guide
Advanced Guide
Camera Basics
3
Play movies.
z z m> button, press the < o><p> buttons to choose
[ ], and then press the < m> button again.
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
4
Adjust the volume.
z z o><p> buttons to adjust the volume.
z z indicator is no longer displayed, press the
< o><p> buttons.
Setting Menu
Accessories
Appendix
Index
5
Pause playback.
z z z
< m> button.
After the movie is finished, [ displayed.
] is
87
•
To switch to Shooting mode from Playback mode, press the shutter button halfway.
•
To deactivate Scroll Display, choose MENU (
1] tab > [Scroll
Display] > [Off].
•
To have the most recent shot displayed when you enter Playback mode, choose MENU (
1] tab > [Resume] > [Last shot].
•
To change the transition shown between images, access MENU (
) and choose your desired effect in [
1] tab > [Transition Effect].
Touch-Screen Operations
z z the screen, and to view the previous image, drag right.
z z drag left or right repeatedly.
z z
Display mode by dragging left or right.
z z single-image display.
z z date in Scroll Display mode, drag up or down.
z z
] in step 3 of
“Viewing” (
).
z z playback, quickly drag up or down across the screen.
z z screen shown at left is displayed, and the following operations are available.
z z
] to display the volume panel, and then touch [ o][p] to adjust the volume. At a volume of 0, [ ] is displayed.
z z drag left or right.
z z
].
z z ^] to return to the screen in step
2 of “Viewing” (
).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
88
Still Images Movies
Switching Display Modes
Press the < p> button to view other information on the screen, or to hide
the information. For details on the information displayed, see “Playback
(Detailed Information Display)” (
No Information
Display
Simple Information
Display
Detailed Information
Display
Still Images Movies
Overexposure Warning (for Image Highlights)
Washed-out highlights in the image flash on the screen in detailed
).
Still Images Movies
Histogram
High
Dark Bright
Low z z
(
) is a histogram showing the distribution of brightness in the image.
The horizontal axis represents the degree of brightness, and the vertical axis, how much of the image is at each level of brightness. Viewing the histogram is a way to check exposure.
Before Use
Still Images Movies
GPS Information Display
GPS Information Display z z camera via Wi-Fi, you can geotag images on the camera, adding information such as latitude, longitude, and elevation
147 ). Geotagged images are labeled
with a [ ] icon in detailed information display. Press the < o> button to view the information recorded.
z z
(shooting date and time) are listed from top to bottom.
z z o> button again to return to detailed information display.
•
[---] is shown instead of numerical values for items not available on your smartphone or items not recorded correctly.
•
UTC: Coordinated Universal Time, essentially the same as Greenwich Mean
Time
•
GPS information display is not available for images that lack this information.
•
You can also switch to GPS information display by dragging the lower half of the screen upward or downward in detailed information display.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
89
Movies
Viewing Short Movies Created When
Shooting Still Images (Digest Movies)
View digest movies recorded automatically in [ ] mode (
) on a day of still image shooting as follows.
1
Choose an image.
z z
[ ].
2
Play the movie.
z z m> button, and then choose
[
z z day of still image shooting is played back, from the beginning.
•
After a moment, [ ] will no longer be displayed when you are using the
camera with information display deactivated (
).
•
You can also play digest movies by touching [ and then touching [ ] twice.
] on the screen in step 1
Playing Only Clips Recorded with Images
z z
[ ].
z z
] to play only the clips that were recorded with Movie Digest images.
z z displayed again.
Viewing by Date
Digest movies can be viewed by date.
1
Choose a movie.
z z n> button, choose [List/
Play Digest Movies] on the [
1] tab, and then choose a date (
).
2
Play the movie.
z z m> button to start playback.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
90
Still Images
Checking People Detected in Face ID
If you switch the camera to simple information display mode (
names of up to five detected people registered in Face ID ( =
) will be displayed.
z z p> button several times until simple information display is activated, and then press the < q><r> buttons to choose an image.
z z people.
•
If you prefer not to have names displayed on images shot using Face ID, choose MENU (
1] tab > [Face ID Info] > [Name Display] > [Off].
Browsing and Filtering Images
Still Images
Navigating through Images in an Index
Movies
By displaying multiple images in an index, you can quickly find the images you are looking for.
1
Display images in an index.
z z g> to display images in an index. Moving the lever again will increase the number of images shown.
z z lever toward < k>. Fewer images are shown each time you move the lever.
2
Choose an image.
z z o><p><q><r> buttons to choose an image.
z z selected image.
z z m> button to view the selected image in single-image display.
•
To deactivate the 3D display effect (shown if you hold down the < o><p> buttons), choose MENU (
1] tab > [Index Effect] > [Off].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
91
Touch-Screen Operations
z z display to index display.
z z pinch in again.
z z through displayed images.
z z z spread your fingers apart.
Touch an image to choose it, and touch it again to view it in single-image display.
Still Images
Finding Images Matching Specified
Conditions
Movies
Find desired images quickly on a memory card full of images by filtering image display according to your specified conditions. You can also protect
(
101 ) these images all at once.
Name
Displays images of a registered person (
).
People
Shot Date
Favorites
Still image/Movie
Displays images with detected faces.
Displays the images shot on a specific date.
Displays images tagged as favorites (
).
Displays only still images or movies.
Displays still images, movies, or movies shot in
[
).
1
Choose a search condition.
z z m> button, choose
[ ] in the menu, and choose a condition z
When you have selected [ ], [ ], or
[ ], choose the condition by pressing the < o><p><q><r> buttons on the screen displayed, and then press the
< m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
92
2
View the filtered images.
z z displayed in yellow frames. To view only these images, press the < q><r> buttons.
z z step 1.
Still Images
Viewing Individual Images in a Group
Images shot consecutively (
) or in [
) are displayed as a group but can also be viewed individually.
1
Choose a grouped image.
z z q><r> buttons to choose an image labeled with [ ].
2
Choose [ ].
z z m> button, and then choose
[
3
View images in the group individually.
z z q><r> buttons will display only images in the group.
z z
< m> button, choose [ ] in the menu, and press the < m> button again
•
During group playback (step 3), you can use the menu functions accessed by pressing the < m> button. You can also browse through images quickly
“Navigating through Images in an Index” (
95 ). By choosing [All Images in Group] for
98 ), “Erasing Multiple Images at Once” (
“Adding Images to the Print List (DPOF)” (
180 ), all images in the group can be manipulated at once.
•
To ungroup images so that they are displayed only as single still images,
) > [
1] tab > [Group Images] > [Off] (
However, grouped images cannot be ungrouped during individual playback.
•
Simultaneous display in [
] mode as described in step 2 of “Enjoying a
Variety of Images from Each Shot (Creative Shot)” (
immediately after you shoot.
•
You can also view grouped images individually by touching [ screen in step 1 and then touching [ ].
] on the
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
93
Editing Face ID Information
If you notice that a name is incorrect during playback, you can change it or erase it.
However, you cannot add names for people who are not detected by Face
ID (names are not displayed), and for people whose names have been erased.
Changing Names
1
Access the setting screen.
z z n> button and choose z
[Face ID Info] on the [
1] tab (
).
Press the < o><p> buttons to choose
[Edit ID Info], and then press the < m> button.
2
Choose an image.
z z
choose an image and press the < m> button.
z z selected face. When multiple names are displayed in an image, press the < q><r> buttons to choose the name to change, and then press the < m> button.
3
Choose the editing option.
z z o><p><q><r> buttons to choose [Overwrite], and then press the
< m> button.
4
Choose the name of the person to overwrite with.
z z
the name of the person you want to overwrite with.
•
You can also access the [Edit ID Info] screen by touching an image on the screen in step 2, touching [ ] to display the orange frame, and then touching the face to overwrite its name.
•
You can also choose editing options by touching them in step 3.
Erasing Names
z z
94 ), choose [Erase] and press the
< m> button.
z z
< q><r> buttons to choose [OK], and then press the < m> button.
•
You can also erase names by touching [OK] after [Erase?] is displayed.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
94
Image Viewing Options
Still Images
Magnifying Images
1
Magnify an image.
z z k> will zoom in and magnify the image, and
[ ] is displayed. You can magnify images up to about 10x by continuing to hold the zoom lever.
z z toward < g>. You can return to singleimage display by continuing to hold it.
Approximate Position of
Displayed Area
2
Move the display position and switch images as needed.
z z
< o><p><q><r> buttons.
z z to [
] is displayed, you can switch
] by pressing the < m> button.
To switch to other images while zoomed, press the < q><r> buttons. Press the
< m> button again to restore the original setting.
•
You can return to single-image display from magnified display by pressing the
< n> button.
Touch-Screen Operations
z z zoom in.
z z by repeating this action.
z z the screen.
z z z z
] to restore single-image display.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
95
Still Images Movies
Viewing Slideshows
Automatically play back images from a memory card as follows. Each image is displayed for about three seconds.
z z m> button, choose [.] in the menu, and choose the desired option
(
).
z z image] is displayed for a few seconds.
z z n> button to stop the slideshow.
•
The camera’s power-saving functions (
during slideshows.
•
To pause or resume slideshows, press the < m> button.
•
You can switch to other images during playback by pressing the < q><r> buttons. For fast-forward or fast-rewind, hold the < q><r> buttons down.
•
), only images matching search conditions are played.
•
Slideshows can also be started by using Touch Actions (
).
Changing Slideshow Settings
You can set up slideshows to repeat, and you can change the transitions between images and the display duration of each image.
1
Access the setting screen.
z z n> button, and then choose [Slideshow] on the [
1] tab
2
Configure the settings.
z z z
then choose the desired option (
To start the slideshow with your settings, choose [Start] and press the < m> button.
z z
< n> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
96
Still Images
Auto Playback of Related Images (Smart
Shuffle)
Based on the current image, the camera offers four images that you may wish to view. After you choose to view one of those images, the camera offers four more images. This is an enjoyable way to play back images in an unexpected order. Try this feature after you have taken many shots, in many kinds of scenes.
1
Choose Smart Shuffle.
z z m> button, and then choose
[
z z
2
Choose an image.
z z o><p><q><r> buttons to choose the image you want to view next.
z z center, surrounded by the next four candidate images.
z z image, press the < m> button. To restore the original display, press the < m> button again.
z z n> button to restore single-image display.
•
Only still images shot with this camera are played back using Smart
Shuffle.
•
Smart Shuffle is not available in the following cases:
- There are less than 50 shots taken with this camera
- An unsupported image is currently displayed
-
Images are shown in filtered display (
)
-
•
On the screen in step 2, touching an image above, below, or on either side will show your chosen image in the center, surrounded by the next four candidate images.
•
For full-screen display of the center image in step 2, touch that image. To restore the original display, touch the screen again.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
97
Still Images Movies
Protecting Images
Protect important images to prevent accidental erasure by the camera
(
).
z z m> button, and then choose
[
). [Protected] is displayed.
z z and choose [
:] again, and then press the < m> button.
•
Protected images on a memory card will be erased if you format the card (
•
Protected images cannot be erased using the camera’s erasure function. To erase them this way, first cancel protection.
Using the Menu
1
Access the setting screen.
z z n> button and choose
[Protect] on the [
).
2
Choose a selection method.
z z
z z
< n> button.
Choosing Images Individually
1
Choose [Select].
z z
98 ), choose [Select] and press the
< m> button.
2
Choose an image.
z z q><r> buttons to choose an image, and then press the < m> button.
[ ] is displayed.
z z m> button again. [ ] is no longer displayed.
z z images.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
98
3
Protect the image.
z z n> button. A z confirmation message is displayed.
Press the < q><r> buttons to choose
[OK], and then press the < m> button.
•
Images will not be protected if you switch to Shooting mode or turn the camera off before finishing the setup process in step 3.
•
You can also select or clear images by touching the screen in step 2, and you can access the confirmation screen by touching [
].
•
You can also protect images by touching [OK] on the screen in step 3.
Selecting a Range
1
Choose [Select Range].
z z
98 ), choose [Select Range] and
press the < m> button.
2
Choose a starting image.
3
z z m> button.
z z q><r> buttons to choose an image, and then press the < m> button.
Choose an ending image.
z z r> button to choose [Last image], and then press the < m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
99
z z q><r> buttons to choose an image, and then press the < m> button.
z z selected as the last image.
4
Protect the images.
z z p> button to choose
[Protect], and then press the < m> button.
•
You can also display the screen for choosing the first or last image by touching an image on the top screen in steps 2 or 3.
•
You can also protect images by touching [Protect] on the screen in step 4.
Specifying All Images at Once
1
Choose [Select All Images].
z z
98 ), choose [Select All Images] and
press the < m> button.
2
Protect the images.
z z o><p> buttons to choose
[Protect], and then press the < m> button.
•
To cancel protection for groups of images, choose [Unlock] in step 4 of
“Selecting a Range” or in step 2 of “Specifying All Images at Once”.
•
You can also protect or unlock images by touching [Protect] or [Unlock] on the screen in step 2.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
100
Still Images Movies
Erasing Images
You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be recovered. However, protected images (
) cannot be erased.
1
Choose an image to erase.
z z q><r> buttons to choose an image.
2
Erase the image.
z z m> button, and then choose z
[
After [Erase?] is displayed, press the
< q><r> buttons to choose [Erase], and then press the < m> button.
z z z z q><r> buttons to choose [Cancel], and then press the < m> button.
•
You can also erase the current image by touching [Erase] on the screen in step 2.
•
Images can also be erased by using Touch Actions (
).
Erasing Multiple Images at Once
You can choose multiple images to erase at once. Be careful when erasing images, because they cannot be recovered. However, protected images
(
Choosing a Selection Method
1
Access the setting screen.
z z n> button, and then choose [Erase] on the [
1] tab (
).
2
Choose a selection method.
z z
z z
< n> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
101
Choosing Images Individually
1
Choose [Select].
z z
Method” (
press the < m> button.
2
Choose an image.
z z step 2 in “Choosing Images Individually”
(
), [ ] is displayed.
z z m> button again. [ ] is no longer displayed.
z z images.
3
Erase the image.
z z n> button. A confirmation message is displayed.
z z q><r> buttons to choose
[OK], and then press the < m> button.
Selecting a Range
1
Choose [Select Range].
z z
), choose [Select
Range] and press the < m> button.
2
Choose images.
z z
3
Erase the images.
z z p> button to choose [Erase], and then press the < m> button.
Specifying All Images at Once
1
Choose [Select All Images].
z z
), choose [Select All
Images] and press the < m> button.
2
Erase the images.
z z q><r> buttons to choose
[OK], and then press the < m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
102
Still Images
Rotating Images
Change the orientation of images and save them as follows.
1
Choose [
\].
z z m> button, and then choose
[
\] in the menu (
).
2
Rotate the image.
z z q> or <r> button, depending on the desired direction. Each time you press the button, the image is rotated
90°. Press the < m> button to complete the setting.
Using the Menu
1
Choose [Rotate].
z z n> button and choose
[Rotate] on the [
1] tab (
2
Rotate the image.
z z q><r> buttons to choose an image.
z z press the < m> button.
z z
< n> button.
•
Rotation is not possible when [Auto Rotate] is set to [Off] (
).
•
On the screen in step 2, you can also touch [
[ ] to return to the menu screen.
] to rotate images or touch
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
103
Deactivating Auto Rotation
Follow these steps to deactivate automatic image rotation, which rotates images based on the current camera orientation.
z z n> button, choose [Auto
Rotate] on the [
1] tab, and then choose
[Off] (
).
•
) when you set [Auto Rotate] to
[Off]. Additionally, images already rotated will be displayed in the original orientation.
•
In Smart Shuffle (
) mode, even if [Auto Rotate] is set to
[Off], images shot vertically will be displayed vertically, and rotated images will be displayed in the rotated orientation.
Before Use
Still Images
Tagging Images as Favorites
Movies
You can organize images by tagging them as favorites. By choosing a category in filtered playback, you can restrict the following operations to all of those images.
•
), Adding Images to the Print List
), Adding Images to a Photobook (
Basic Guide
Advanced Guide
Camera Basics
Configure the setting.
z z
> button. [ ] is displayed.
z z
> button again. [ ] is no longer displayed.
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
•
Favorite images will have a three-star rating ( ) when transferred to computers running Windows 8, Windows 7, or Windows Vista. (Does not apply to movies.)
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
104
Using the Menu
1
Choose [Favorites].
z z n> button and choose
[Favorites] on the [
1] tab (
).
2
Choose an image.
z z q><r> buttons to choose an image, and then press the < m> button.
[ ] is displayed.
z z m> button again. [ ] is no longer displayed.
z z images.
3
Finish the setup process.
z z n> button. A z confirmation message is displayed.
Press the < q><r> buttons to choose
[OK], and then press the < m> button.
•
Images will not be tagged as favorites if you switch to Shooting mode or turn the camera off before finishing the setup process in step 3.
•
Tagging images as favorites makes it easier to add them when creating
).
•
You can also select or clear current images by touching the screen in step 2.
•
Images can also be tagged as favorites by using Touch Actions (
).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
105
Still Images Movies
Convenient Control: Touch Actions
You can quickly and easily activate functions that you have assigned to four touch gestures (Touch Actions), in single-image display.
Using a Function Assigned to [ ]
z z z z
] is now activated.
z z assigned to [ ], [ ], and [ ] by dragging across the screen.
z z
Actions as desired.
Changing Touch Actions Functions
Simplify your preferred camera operations by reassigning dragging patterns to them as desired.
1
Access the setting screen.
z z n> button, and then choose [Set Touch Actions] on the [
1] tab (
).
2
Assign a function to a Touch
Action.
z z o><p> buttons to choose a Touch Action, and then press the
< q><r> buttons to choose the function to assign.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
106
Assignable Functions
Favorites
Next Favorite
Previous Favorite
Next Date
Tag images as favorites, or untag the image.
Switch to displaying the next image tagged as a favorite.
Switch to displaying the previous image tagged as a favorite.
Switch to displaying the first image with the next shooting date.
Switch to displaying the first image with the previous shooting date.
Start Smart Shuffle playback.
Previous Date
Smart Shuffle
To Camera
To Smartphone
To Computer
To Printer
To Web Service
Slideshow
Erase
Protect
Rotate
Access the Wi-Fi connection screen.
For Wi-Fi details, see “Wi-Fi Functions” (
Start a slideshow.
Erase an image.
Protect an image or cancel protection.
Rotate an image.
Editing Still Images
•
Image editing (
) is only available when the memory card has sufficient free space.
•
You can access editing screens for various functions by touching an image after choosing the function in the menu.
•
When [ ] is shown on an editing screen, you can touch [ pressing the < n> button, if you prefer.
•
When [ ] is shown on an editing screen, you can touch [ pressing the < m> button, if you prefer.
] instead of
] instead of
Still Images
Resizing Images
Save a copy of images at a lower resolution.
1
Choose [Resize].
z z n> button and choose
[Resize] on the [
2
Choose an image.
z z q><r> buttons to choose an image, and then press the < m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
107
3
Choose an image size.
z z q><r> buttons to choose the z size, and then press the < m> button.
[Save new image?] is displayed.
4
Save the new image.
z z q><r> buttons to choose
[OK], and then press the < m> button.
z z
5
Review the new image.
z z n> button. [Display new image?] is displayed.
z z q><r> buttons to choose
[Yes], and then press the < m> button.
z z
•
Editing is not possible for images shot at a resolution of [ ]
] in step 3.
•
Images cannot be resized to a higher resolution.
•
You can also configure this setting by touching the size on the screen in step
3, touching it again, and then touching [OK].
•
You can also view saved images by touching [Yes] on the screen in step 5.
Still Images
Cropping
You can specify a portion of an image to save as a separate image file.
1
Choose [Cropping].
z z n> button, and then choose [Cropping] on the [
1] tab
2
Choose an image.
z z q><r> buttons to choose an image, and then press the < m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
108
Cropping Area
Preview of Image After
Cropping
Resolution After Cropping
3
Adjust the cropping area.
z z the image to be cropped.
z z left, and a preview of the image as cropped is shown in the lower right.
z z lever.
z z
< o><p><q><r> buttons.
z z the < m> button.
z z n> button.
4
Save as a new image and review.
z z
(
).
•
Editing is not possible for images shot at a resolution of [ ]
(
) or resized to [ ] (
•
Images supported for cropping will have the same aspect ratio after cropping.
•
Cropped images will have a lower resolution than uncropped images.
•
If you crop still images shot using Face ID (
), only the names of the people left in the cropped image will remain.
•
To move the frame, drag either image on the screen in step 3.
•
You can also resize frames by pinching in or out (
) on the screen in step 3.
Still Images
Changing Image Color Tones (My Colors)
You can adjust image colors and then save the edited image as a separate
file. For details on each option, see “Changing Image Color Tones (My
1
Choose [My Colors].
z z n> button, and then choose [My Colors] on the [
1] tab
2
Choose an image.
z z q><r> buttons to choose an image, and then press the < m> button.
3
Choose an option.
z z q><r> buttons to choose an option, and then press the < m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
109
4
Save as a new image and review.
z z
(
).
•
Image quality of pictures you repeatedly edit this way will be a little lower each time, and you may not be able to obtain the desired color.
•
The color of images edited using this function may vary slightly from the color of images shot using My Colors (
•
You can also configure this setting by touching an option to select it on the screen in step 3 and then touching it again.
Still Images
Correcting Image Brightness (i-Contrast)
Excessively dark image areas (such as faces or backgrounds) can be detected and automatically adjusted to the optimal brightness. Insufficient overall image contrast is also automatically corrected, to make subjects stand out better. Choose from four correction levels, and then save the image as a separate file.
1
Choose [i-Contrast].
z z n> button, and then choose [i-Contrast] on the [
1] tab
2
Choose an image.
z z q><r> buttons to choose an image, and then press the < m> button.
3
Choose an option.
z z q><r> buttons to choose an option, and then press the < m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
4
Save as a new image and review.
z z
110
•
For some images, correction may be inaccurate or may cause images to appear grainy.
•
Images may look grainy after repeated editing using this function.
•
If [Auto] does not produce the expected results, try correcting images using
[Low], [Medium], or [High].
•
You can also configure this setting by touching [ q][r] on the screen in step 3.
Still Images
Correcting Red-Eye
Automatically corrects images affected by red-eye. You can save the corrected image as a separate file.
1
Choose [Red-Eye Correction].
z z n> button, and then choose [Red-Eye Correction] on the [
1]
2
Choose an image.
z z q><r> buttons to choose an image.
3
Correct the image.
z z m> button.
z z corrected, and frames are displayed around corrected image areas.
z z
Follow the steps in “Magnifying Images”
4
Save as a new image and review.
z z o><p><q><r> buttons to choose [New File], and then press the
< m> button.
z z z z
•
Some images may not be corrected accurately.
•
To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be erased.
•
Protected images cannot be overwritten.
•
You can save images by touching [New File] or [Overwrite] on the screen in step 4.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
111
Movies
Editing Movies
You can cut movies to remove unneeded portions at the beginning or end.
1
Choose [
*].
z z
(
), choose [
*] and press the
< m> button.
z z are now displayed.
Movie Editing Panel
Movie Editing Bar
2
Specify portions to cut.
z z o><p> buttons to choose
[ ] or [ ].
z z
(identified by [ ] on the screen), press the < q><r> buttons to move [ ]. Cut the beginning of the movie (from [ ]) by choosing [ ], and cut the end of the movie by choosing [ ].
z z
[ ] mark, in [ ] the portion before the nearest [ ] mark on the left will be cut, while in [ ] the portion after the nearest
[ ] mark on the right will be cut.
3
Review the edited movie.
z z o><p> buttons to choose
[ ], and then press the < m> button.
The edited movie is now played.
z z z z o><p> buttons to choose [ ]. Press the < m> button, press the < q><r> buttons to choose [OK], and then press the < m> button again.
4
Save the edited movie.
z z o><p> buttons to choose
[ ], and then press the < m> button.
z z o><p><q><r> buttons to choose [New File], and then press the z
< m> button.
The movie is now saved as a new file.
z z press the < m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
112
•
To overwrite the original movie with the cut one, choose [Overwrite] in step 4. In this case, the original movie will be erased.
•
If the memory card lacks sufficient space, only [Overwrite] will be available.
•
Movies may not be saved if the battery pack runs out while saving is in progress.
•
When editing movies, you should use a fully charged battery pack or
an AC adapter kit (sold separately,
).
Reducing File Sizes
Movie file sizes can be reduced by compressing movies as follows.
z z
Movies”, choose [ ]. Choose [New File], and then press the < m> button.
z z press the < m> button.
•
Compressed movies are saved in [
•
[ ] movies cannot be compressed.
] format.
•
Edited movies cannot be saved in compressed format when you choose
[Overwrite].
•
However, you can compress and save edited movies as new files by choosing
[Compress & Sav.].
Movies
Editing Digest Movies
Individual chapters (clips) (
] mode can be erased, as needed. Be careful when erasing clips, because they cannot be recovered.
1
Select the clip to erase.
z z
Movies Created When Shooting Still
play a movie created in [ ] mode, and then press the < m> button to access the movie control panel.
z z q><r> buttons to choose
[ ] or [ ], and then press the < m> button.
2
Choose [ ].
z z q><r> buttons to choose
[ ], and then press the < m> button.
z z repeatedly.
3
Confirm erasure.
z z q><r> buttons to choose
[OK], and then press the < m> button.
z z overwritten.
•
[ ] is not displayed if you select a clip when the camera is connected to a printer.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
113
Still Images Movies
Viewing Albums (Story Highlights)
You can create an album of automatically selected images organized by dates or people’s names. These images are combined into a slideshow that can be saved as a short movie of about 2 – 3 minutes.
Before using this feature, make sure the battery pack is fully charged.
Choosing Themes for Albums
Press the < > button to access the home screen and choose themes for the camera to use when selecting album elements. Tagging images as
favorites makes it easier to add them when creating albums (
Date
Person’s name
Event
Custom
Creates an album of images shot on the same day.
The current image before you access the home screen serves as the basis for the others selected, which are shot on the same day.
Can be used to create monthly albums of people, such as albums of children as they grow up.
Subjects whose Face ID information you registered before shooting may be selected for albums.
Subjects in the current image before you access the home screen serve as the basis for others selected, which are shot in the same month.
A good choice for albums of vacations, parties, or other events.
Creates albums of event shots older or newer than the image selected before you access the home screen.
Images based on your specified image, shooting date, or people.
1
Choose an image.
z z z z depending on image shooting dates and
Face ID information.
2
Access the home screen.
z z
> button.
z z screen is displayed.
3
Preview the album.
z z q><r> buttons to choose
[Date], [Person’s name], or [Event] as the album theme, and then press the < m> button.
z z seconds, an album preview is played.
4
Save the album.
z z o><p> buttons to choose
[Save Album as Movie], and then press the < m> button.
z z displayed.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
114
5
).
•
Albums cannot be created from these images.
- Images from other cameras
- Movies other than digest movies
•
Albums cannot be saved unless there is enough space on the memory card.
•
Individual chapters can be edited (
).
•
You can specify the color effect in step 3 by choosing [Change Color Effect] and pressing the < m> button. Press the <q><r> buttons to choose a color effect, and then press the < m> button to preview the album with the effect.
•
You can also play albums by choosing [List of Albums] on the Story Highlights home screen, pressing the < m> button, choosing a listed album, and pressing the < m> button again.
•
When the lens is out, you can retract it quickly by pressing the <
> button.
Still Images Movies
Creating Your Own Albums
1
Choose to create a Custom album.
z z
), choose
[Custom] and press the < m> button.
2
Choose a selection method.
z z
Selection], or [Person Selection], and then press the < m> button.
3
Choose album elements.
z z z then press the < m> button.
Selected images, dates, or people are indicated by [ ].
z z
Selection], press the < > button. z z
[Date Selection] or [Person Selection], press the < n> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
115
4
Choose a color effect.
z z q><r> buttons to choose a color effect, and then press the < m> button.
z z selected color effect applied.
5
Save the album.
z z
Highlights)” (
•
Up to 40 images can be selected if you choose [Image Selection]. The second time you create a custom album, [Select images based on previous settings?] is displayed. To use previously selected images as the basis, choose [Yes].
The previous images are labeled with [ ], and multiple images are displayed at once.
•
Up to 15 dates can be selected if you choose [Date Selection].
•
After the preview, you can change the color effect by choosing [Change Color
Effect]. The screen in step 4 is displayed again.
•
The color effect may not be applied to some images.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
116
Wi-Fi Functions
Send images wirelessly from the camera to a variety of compatible devices, and use the camera with Web services
What You Can Do with Wi-Fi .........................
Uploading Images to Web Services ....................
Sending Images to a Smartphone .......................
Sending Images to a Computer ..........................
Printing Images Wirelessly ..................................
Sending Images to Another Camera ...................
Registering Web Services .............................
Registering CANON iMAGE GATEWAY .............
Registering Other Web Services .........................
Smartphone ...................................................
Preparing to Register a Computer ................
Checking Your Computer Environment ...............
Installing the Software .........................................
Configuring the Computer for a
Wi-Fi Connection (Windows Only) ......................
Accessing the Wi-Fi Menu .............................
Initial Connection via Wi-Fi ..................................
After the Initial Wi-Fi Connection .........................
Connecting via an Access Point ...................
Confirming Access Point Compatibility ................
Connecting to WPS-Compatible Access Points ..
Connecting to Access Points in the List ..............
Connecting without an Access Point ...........
Previous Access Points .......................................
Connecting to Another Camera ....................
Sending Images ..............................................
Sending Images Individually ...............................
Sending Multiple Images .....................................
Adding Comments ...............................................
Saving Images to a Computer .......................
Using the < > Button ....................................
Registering a Smartphone to the < > Button ....
Registering Image Sync to the < > Button ........
Clearing Registered Destinations ........................
(Image Sync) .................................................
Initial Preparations ..............................................
Sending Images ..................................................
Geotagging Images on the Camera ..............
Shooting Remotely ..............................................
Editing or Erasing Wi-Fi Settings .................
Editing Connection Information ...........................
Returning the Wi-Fi Settings to Default ...............
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
117
What You Can Do with Wi-Fi
This camera is an approved Wi-Fi ® product. You can wirelessly connect to and send images to the following devices and services.
Note that, in this chapter, wireless LAN functions other than Wi-Fi may be referred to as Wi-Fi.
Sending images via Wi-Fi requires some initial preparation on the camera and target devices. Preparations and methods of sending images vary depending on the destination.
Note that before using Wi-Fi, you will need to register a camera nickname on the camera (
).
•
Before using Wi-Fi, be sure to read “Wi-Fi (Wireless LAN)
208 ) and “Security Precautions” (
•
Wi-Fi is a brand name that indicates interoperability certification of wireless
LAN devices.
Uploading Images to Web Services
Images can be sent to social network services and other Web services via CANON iMAGE GATEWAY*. Unsent images on the camera can also be sent automatically to a computer or Web service via CANON iMAGE
GATEWAY.
* CANON iMAGE GATEWAY is an online photo service available to those who have purchased this product.
Steps in sending images
SNS, videosharing sites, e-mail
CANON iMAGE
GATEWAY
Access point
Camera
Computer or smartphone browsers
Register Web services (
)
Connect via an access point (
Send images (
* You can send images to a computer or Web service.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
118
Sending Images to a Smartphone
Send images to smartphones and tablet computers that have Wi-Fi functions. You can also shoot remotely and geotag your shots from a smartphone or tablet.
For convenience in this manual, smartphones, tablets, and other compatible devices are collectively referred to as “smartphones”.
Steps in sending images
App Store/
Google Play
CameraWindow
Camera
Access point
Smartphone
Tablet computer
Install CameraWindow on a smartphone (
) or via an access point (
)
Sending Images to a Computer
Use the software to wirelessly send images from the camera to a computer.
Steps in sending images
Internet
CameraWindow
Access point
Camera
Computer
Check your computer environment (
)
Download and install the software (
)
Configure the computer for a Wi-Fi connection (Windows only, =
)
Connect via an access point (
Save images to the computer (
)
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
119
Printing Images Wirelessly
Send images wirelessly to a PictBridge-compatible printer (supporting DPS over IP) to print them.
Steps in printing images
Camera
Printer
Access point
) or via an access point (
)
Sending Images to Another Camera
Use the Wi-Fi function to send images between Canon-brand cameras.
Steps in sending images
Camera
)
)
Camera
Registering Web Services
Use a smartphone or computer to add to the camera Web services that you want to use.
•
A smartphone or computer with a browser and Internet connection is required to complete camera settings for CANON iMAGE GATEWAY and other Web services.
•
Check the CANON iMAGE GATEWAY website for details on browser
(Microsoft Internet Explorer, etc.) requirements, including settings and version information.
•
For information on countries and regions where CANON iMAGE
GATEWAY is available, visit the Canon website (http://www.canon.com/ cig/).
•
You must have an account with Web services other than CANON iMAGE
GATEWAY if you desire to use them. For further details, check the websites for each Web service you want to register.
•
Separate ISP connection and access point fees may be applicable.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
120
Registering CANON iMAGE GATEWAY
After linking the camera and CANON iMAGE GATEWAY, add CANON iMAGE GATEWAY as a destination Web service on the camera.
1
Log in to CANON iMAGE
GATEWAY and access the camera settings page.
z z http://www.canon.com/cig/ and visit the
CANON iMAGE GATEWAY site for your region.
z z enter your user name and password to log in. If you do not have a CANON iMAGE GATEWAY account, follow the instructions to complete member registration (free of charge).
z z
2
Choose your camera model.
z z
] is displayed in the Wi-Fi menu.
z z displayed for entering the authentication code. On this page in step 9, you will enter the authentication code displayed on the camera after steps 3 – 8.
3
Access the Wi-Fi menu.
z z
4
Choose [ ].
z z o><p><q><r> buttons to choose [ ], and then press the < m> button.
5
Establish a connection with an access point.
z z q><r> buttons to choose
[Authenticate], and then press the < m> button.
6
Choose an access point.
z z o><p> buttons to choose a network (access point), and then press the < m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
121
7
Enter the access point password.
z z m> button to access the keyboard, and then enter the password
(
).
z z o><p> buttons to choose
[Next], and then press the < m> button.
8
Choose [Auto] and establish the connection.
z z o><p> buttons to choose
[Auto], and then press the < m> button.
z z iMAGE GATEWAY via the access point, an authentication code is displayed.
9
Enter the authentication code.
z z the authentication code displayed on the camera and go to the next step.
z z displayed.
10
Check the confirmation numbers and complete the setup process.
z z the camera matches the number on the smartphone or computer.
z z q><r> buttons to choose
[OK], and then press the < m> button.
z z smartphone or computer.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
122
z z
) and CANON iMAGE
GATEWAY are now added as destinations, and the [ ] icon changes to [ ].
z z smartphone or computer to indicate that this process is finished. To add other
Web services, follow the procedure in
“Registering Other Web Services” from
).
•
You can connect to WPS-compatible access points by choosing [WPS
Connection] in step 6. For details, see steps 5 – 7 in “Connecting to WPS-
Compatible Access Points” (
).
Registering Other Web Services
You can also add Web services besides CANON iMAGE GATEWAY to the camera. Note that CANON iMAGE GATEWAY must be registered on the camera first (
1
Access the Web service settings screen.
z z
to CANON iMAGE GATEWAY, and then access the Web service settings screen.
2
Configure the Web service you want to use.
z z smartphone or computer to set up the
Web service.
3
Choose [ ].
z z
the < o><p><q><r> buttons to choose
[ ], and then press the < m> button.
z z updated.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
•
If any configured settings change, follow these steps again to update the camera settings.
123
Installing CameraWindow on a
Smartphone
Before connecting your camera to a smartphone, first install the free dedicated application, CameraWindow, on your smartphone.
1
Connect the smartphone to a network.
2
Install CameraWindow.
z z smartphone (OS version 4.0 or later), activating NFC and touching the smartphone against the camera’s
N-Mark ( ) will start Google Play on the smartphone. Once the CameraWindow download page is displayed, download and install the app.
z z
CameraWindow in Google Play and download and install the app.
Before Use
z z
CameraWindow in the App Store and download and install the app.
z z to establish a connection with the smartphone (
,
).
•
When using NFC, keep the following points in mind.
- Avoid strong impact between the camera and smartphone. This may damage the devices.
- Depending on the smartphone, the devices may not recognize each other immediately. In this case, try holding the devices together in slightly different positions.
- Do not place other objects between the camera and smartphone.
Also, note that camera or smartphone covers or similar accessories may block communication.
•
For details on this application (supported smartphones and included functions), refer to the Canon website.
•
Not all NFC-compatible smartphones have an N-Mark ( ). For details, refer to the smartphone user manual.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
124
Preparing to Register a Computer
Prepare to register a computer. To save images to the computer wirelessly, you must install CameraWindow.
Checking Your Computer Environment
The camera can connect via Wi-Fi to computers running the following operating systems. For detailed system requirements and compatibility information, including support in new operating systems, visit the Canon website.
Windows
Operating
System
Windows 8/8.1
Windows 7 SP1
Mac OS
Mac OS X 10.9
Mac OS X 10.8.2 or later
Mac OS X 10.7
•
Windows 7 Starter and Home Basic editions are not supported.
•
Windows 7 N (European version) and KN (South Korean version) require a separate download and installation of Windows Media
Feature Pack.
For details, check the following website.
http://go.microsoft.com/fwlink/?LinkId=159730
Installing the Software
Windows 7 and Mac OS X 10.8 are used here for the sake of illustration.
What you will need:
z z z z
* A USB cable is not included. Although you can install the software without using a cable, some features will not be added.
1
Download the software.
z z
Internet, access http://www.canon.com/ icpd/.
z z z z
2
Begin the installation.
z z on-screen instructions to complete the installation process.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
125
3
When a message is displayed prompting you to connect the camera, choose whether to connect or not.
When Connecting the Camera to the Computer
z z cover ( ). With the smaller plug of the
USB cable in the orientation shown, insert the plug fully into the camera terminal ( ).
z z in the computer’s USB port. For details about USB connections on the computer, refer to the computer user manual.
z z on-screen instructions to complete the installation process.
Without Connecting the Camera
z z the device] and follow the on-screen instructions to complete the installation process.
4
Install the files.
z z depending on computer performance and the Internet connection.
z z after installation.
z z connected to the computer, turn the camera off before disconnecting the cable.
•
Because the content and functions of software vary according to the camera model, if you have several cameras, you must use each camera to update to its latest version of the software.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
126
Configuring the Computer for a Wi-Fi
Connection (Windows Only)
On a computer running Windows, configure the following settings before connecting the camera to the computer wirelessly.
1
Confirm that the computer is connected to an access point.
z z connection, refer to the computer user manual.
2
Configure the setting.
z z
► [All Programs] ► [Canon Utilities] ►
[CameraWindow]
► [Wi-Fi connection setup].
z z on-screen instructions and configure the setting.
•
The following Windows settings are configured when you run the utility in step
2.
- Turn on media streaming.
This will enable the camera to see (find) the computer to access via Wi-Fi.
- Turn on network discovery.
This will enable the computer to see (find) the camera.
- Turn on ICMP (Internet Control Message Protocol).
This allows you to check the network connection status.
- Enable Universal Plug & Play (UPnP).
This will enable network devices to detect each other automatically.
•
Some security software may prevent you from completing the settings as described here. Check the settings of your security software.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
127
Accessing the Wi-Fi Menu
Initial Connection via Wi-Fi
To start with, register a camera nickname.
This nickname will be displayed on the screen of target devices when connecting to other devices via Wi-Fi.
1
Access the Wi-Fi menu.
z z 1> button to turn the camera on.
z z o> button.
2
Enter a nickname.
z z m> button to access the keyboard, and then enter a nickname
(
).
z z z z o><p> buttons to choose
[OK], and then press the < m> button.
z z
•
When connecting wirelessly to any device other than a computer, a memory card must be inserted in the camera. Additionally, the memory card must contain images before you can access Web services or connect to a printer wirelessly.
•
To change the camera’s nickname, choose MENU (
) > [
3] tab > [Wi-Fi
Settings] > [Change Device Nickname].
•
A message will be displayed if the nickname you attempt to enter in step 2 begins with a symbol or space. Press the < m> button and enter a different nickname.
After the Initial Wi-Fi Connection
•
Once you have connected to devices via Wi-Fi, recent destinations will be listed first when you access the Wi-Fi menu by pressing the < > button. You can easily connect again by pressing the < o><p> buttons to choose the device name and then pressing the < m> button.
•
To add a new device, display the device selection screen by pressing the
< q><r> buttons, and then configure the setting.
•
If you prefer not to display recent target devices, choose MENU (
) >
[
3] tab > [Wi-Fi Settings] > [Target History] > [Off].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
128
Connecting via an Access Point
Connect to your access point via Wi-Fi as follows.
Also refer to the access point user manual.
Confirming Access Point Compatibility
Confirm that the Wi-Fi router or base station conforms to the Wi-Fi
If you are already using Wi-Fi, confirm the following items. For instructions on checking network settings, refer to the access point user manual.
•
If system administrator status is needed to adjust network settings, contact the system administrator for details.
•
These settings are very important for network security. Exercise adequate caution when changing these settings.
Before Use
Check sheet
Network name (SSID/ESSID)
The SSID or ESSID for the access point you use.
Also called the “access point name” or “network name”.
Network authentication / data encryption (encryption method / encryption mode)
The method for encrypting data during wireless transmission.
○ None
○ WEP (open system authentication)
○ WPA-PSK (TKIP)
○ WPA-PSK (AES)
○ WPA2-PSK (TKIP)
○ WPA2-PSK (AES)
Password (encryption key / network key)
The key used when encrypting data during wireless transmission. Also called the “encryption key” or “network key”.
Key index (transmit key)
The key set when WEP is used for network authentication / data encryption.
○ 1
Connection methods vary depending on whether the access point supports
Wi-Fi Protected Setup (WPS) or not. Refer to the user manual provided with your access point to check if it supports WPS.
•
A router is a device that creates a network (LAN) structure for connecting multiple computers. A router that contains an internal Wi-Fi function is called a
“Wi-Fi router”.
•
This guide refers to all Wi-Fi routers and base stations as “access points”.
•
If you use MAC address filtering on your Wi-Fi network, be sure to add the camera’s MAC address to your access point. You can check your camera’s
MAC address by choosing MENU (
3] tab > [Wi-Fi Settings] >
[Check MAC Address].
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
129
Connecting to WPS-Compatible Access
Points
WPS makes it easy to complete settings when connecting devices over Wi-
Fi. You can use either Push Button Configuration Method or PIN Method for settings on a WPS supported device.
1
Confirm that the target device is connected to the access point.
z z to Web services.
z z connection, refer to the device and access point user manuals.
2
Access the Wi-Fi menu
3
Choose the target device.
z z o><p><q><r> buttons to choose the target device, and then press the < m> button.
z z z z
].
z z
2].
z z the service icon. If multiple recipients or sharing options are used with a Web service, choose the desired item on the
[Select Recipient] screen by pressing the
< o><p> buttons, and then press the
< m> button.
4
Choose [Add a Device].
z z o><p> buttons to choose
[Add a Device], and then press the < m> button.
z z when the [Waiting to connect] screen
< q><r> buttons to choose [Switch
Network], and then press the < m> button.
z z displayed.
5
Choose [WPS Connection].
z z o><p> buttons to choose
[WPS Connection], and then press the
< m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
130
6
Choose [PBC Method].
z z o><p> buttons to choose
[PBC Method], and then press the < m> button.
7
Establish the connection.
z z connection button for a few seconds.
z z m> button to go to the next step.
z z point.
z z 2], or [ ] in step 3, devices connected to the access point are listed on the [Select a Device] screen displayed next.
z z step 3, go to step 12.
8
For a smartphone connection:
Start CameraWindow.
z z smartphone (OS version 4.0 or later), activating NFC and touching the smartphone against the camera’s N-Mark
( ,
) will start CameraWindow on the smartphone.
z z
CameraWindow on the smartphone.
z z register a smartphone nickname to be displayed on the camera.
z z the camera, the device connection screen will be displayed on the camera.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
131
9
To connect to a smartphone, printer, or computer:
Choose the target device.
z z o><p> buttons to choose the target device name, and then press z the < m> button.
If you have selected a smartphone, go to step 11.
z z
Macintosh computer, go to step 12.
10
If you have selected a computer running Windows in step 9 for the first time:
Install a driver.
z z the camera, click the Start menu on the computer, click [Control Panel], and then click [Add a device].
z z z z z z the camera and computer connection is enabled, the AutoPlay screen will be displayed. Nothing will be displayed on the camera screen.
11
For a smartphone connection:
Adjust the privacy setting.
z z q><r> buttons to choose z
[Yes], and then press the < m> button.
You can now use the smartphone to browse, import, or geotag (
images on the camera or shoot remotely
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
132
12
Send or print the images.
z z are connected varies depending on the target device.
z z smartphone or Web service, an image transfer screen is displayed.
z z z
When the camera is connected to a computer, the camera screen is blank.
Follow the steps in “Saving Images to a
the computer.
z z printer, you can print by following the same steps as for printing via USB. For
details, see “Printing Images” (
•
All images in the camera can be viewed from the connected smartphone when you choose [Yes] in step 11. To keep camera images private, so that they cannot be viewed from the smartphone, choose [No] in step 11.
•
To change privacy settings for smartphones added to the list, choose the smartphone whose settings you want to change from
[Edit a Device] in step 4, and then choose [View Settings].
Before Use
•
If you chose [PIN Method] in step 6, a PIN code will be displayed on the screen. Be sure to set this code in the access point. Choose a device in the
[Select a Device] screen. For further details, refer to the user manual included with your access point.
•
To add multiple destinations, repeat this procedure from the first step.
•
Once you have assigned a connection destination to Touch Actions (
), you can prepare the camera to reconnect to the destination simply by dragging across the screen with the assigned gesture.
Previous Access Points
You can reconnect to any previous access points automatically by following
step 4 in “Connecting to WPS-Compatible Access Points” (
).
•
To reconnect to the access point, confirm that the target device is already connected to it, and then follow the procedure from step 9. Note that this step is not required when connecting to Web services.
•
To switch access points, choose [Switch Network] on the screen displayed when you establish a connection, and then follow the procedure from step 5.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
133
Connecting to Access Points in the List
1
View the listed access points.
z z points) as described in steps 1 – 4 of
“Connecting to WPS-Compatible Access
Points” (
2
Choose an access point.
z z o><p> buttons to choose a network (access point), and then press the < m> button.
3
Enter the access point password.
z z m> button to access the keyboard, and then enter the password
(
).
z z o><p> buttons to choose
[Next], and then press the < m> button.
4
Choose [Auto].
z z o><p> buttons to choose z
[Auto], and then press the < m> button.
If you selected [ ], [
2], or [ ] as the target device, see “Connecting to WPS-
Compatible Access Points”, starting with step 9 (
z z destination, see “Connecting to WPS-
Compatible Access Points”, starting with
•
To determine the access point password, check on the access point itself or refer to the user manual.
•
Up to 16 access points will be displayed. If no access points are detected, choose [Manual Settings] in step 2 to manually set an access point. Follow onscreen instructions and enter an SSID, security settings, and a password.
•
When you use an access point that you have already connected to for connecting to another device, [*] is displayed for the password in step 3. To use the same password, press the < o><p> buttons to choose [Next], and then press the < m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
134
Connecting without an Access Point
When connecting to a smartphone or printer via Wi-Fi, you can use the camera as an access point (Camera Access Point mode) instead of using another access point.
Similarly, no access point is used in camera-to-camera connections
(
).
1
Access the Wi-Fi menu
2
Choose the target device.
z z o><p><q><r> buttons to choose the target device, and then press z the < m> button.
To connect to a smartphone, choose [ ].
z z 2].
3
Choose [Add a Device].
z z o><p> buttons to choose
[Add a Device], and then press the < m> button.
z z
Before Use
Basic Guide
Advanced Guide
Camera Basics
4
Connect the target device to the network.
z z setting menu, choose the SSID (network name) displayed on the camera to connect to it.
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
135
5
For a smartphone connection:
Start CameraWindow.
z z smartphone (OS version 4.0 or later), activating NFC and touching the smartphone against the camera’s N-Mark
(
) will start CameraWindow on the smartphone.
z z
CameraWindow on the smartphone.
z z register a smartphone nickname to be displayed on the camera.
z z the camera, the device connection screen will be displayed on the camera.
6
Choose the target device.
z z o><p> buttons to choose the target device name, and then press the < m> button.
7
For a smartphone connection:
Adjust the privacy setting.
z z q><r> buttons to choose
[Yes], and then press the < m> button.
z z browse, import, or geotag (
images on the camera or shoot remotely
8
Send or print the images.
z z are connected varies depending on the target device.
z z smartphone, an image transfer screen is displayed.
z z
z z printer, you can print by following the same steps as for printing via USB. For
details, see “Printing Images” (
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
136
•
All images in the camera can be viewed from the connected smartphone when you choose [Yes] in step 7. To keep camera images private, so that they cannot be viewed from the smartphone, choose [No] in step 7.
•
To change privacy settings for smartphones added to the list, choose the smartphone whose settings you want to change from
[Edit a Device] in step 3, and then choose [View Settings].
•
To add multiple devices, repeat this procedure from the first step.
•
For better security, you can require password input on the screen in step 3 by accessing MENU (
3] tab > [Wi-Fi Settings] >
[Password] > [On]. In this case, in the password field on the device in step 4, enter the password displayed on the camera.
•
Once you have assigned a connection destination to Touch Actions (
), you can prepare the camera to reconnect to the destination simply by dragging across the screen with the assigned gesture.
Previous Access Points
You can reconnect to any previous access points automatically by following
step 3 in “Connecting without an Access Point” (
•
To use the camera as an access point, choose [Switch Network] on the screen displayed when you establish a connection, and then choose
[Camera Access Point Mode].
•
When reconnecting via a previous access point, connect the target device to the access point in step 4.
•
To switch access points, choose [Switch Network] on the screen displayed when you establish a connection, and then follow the procedure in “Connecting to WPS-Compatible Access Points” from step 5
(
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
137
Connecting to Another Camera
Connect two cameras via Wi-Fi and send images between them as follows.
•
Only Canon-brand cameras equipped with a Wi-Fi function can be connected to wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot be connected to if they do not have a Wi-Fi function. You cannot connect to
PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS cameras with this camera.
1
Access the Wi-Fi menu
2
Choose camera.
z z o><p><q><r> buttons to choose [
4], and then press the <m> button.
3
Choose [Add a Device].
z z o><p> buttons to choose
[Add a Device], and then press the < m> button.
z z too.
z z added when [Start connection on target camera] is displayed on both camera screens.
z z successfully, the image transfer screen
will be displayed. Proceed to “Sending
Before Use
Basic Guide
Advanced Guide
Camera Basics
•
To add multiple cameras, repeat this procedure from the first step.
•
Once a camera is added, the camera name will be displayed on the screen in step 3. To connect to a camera again, simply choose the camera name from the list.
•
Once you have assigned a connection destination to Touch Actions (
), you can prepare the camera to reconnect to the destination simply by dragging across the screen with the assigned gesture.
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
138
Sending Images
Send images wirelessly to destinations registered on the camera as follows.
Note that when images are sent to a computer, the computer is used instead of the camera (
Sending Images Individually
1
Choose an image.
z z choose an image to send.
2
Send the image.
z z q><r> buttons to choose
[Send this image], and then press the
< m> button.
z z terms of service, choose [I Agree], and press the < m> button.
z z darkens during image transfer.
z z service, [OK] is displayed. Press the
< m> button to return to the playback screen.
z z smartphone, [Transfer completed] will be displayed, and the display will return to the image transfer screen.
•
For movies that you do not compress (
), a separate, compressed file is sent instead of the original file. Note that this may delay transmission, and the file cannot be sent unless there is enough space for it on the memory card.
•
Keep your fingers or other objects off the Wi-Fi antenna area ( =
Covering this may decrease the speed of your image transfers.
•
Depending on the condition of the network you are using, it may take a long time to send movies. Be sure to keep an eye on the camera battery level.
•
When sending movies to smartphones, note that the supported image quality varies depending on the smartphone. For details, refer to the smartphone user manual.
•
To disconnect from the camera, press the < n> button. After the confirmation message, press the < q><r> buttons to choose [OK], and then press the < m> button. You can also use the smartphone to end the connection.
•
On the screen, wireless signal strength is indicated by the following icons.
[ ] high, [ ] medium, [ ] low, [ ] weak
•
Sending images to Web services will take less time when resending images you have already sent that are still on the CANON iMAGE GATEWAY server.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
139
Choosing the Image Resolution (Size)
On the image transfer screen, choose [ ] by pressing the < o><p> buttons, and then press the < m> button. On the next screen, choose the resolution by pressing the < o><p> buttons, and then press the <m> button.
•
To send images at original size, select [No] as the resizing option.
•
Choosing [ ] or [ ] will resize images that are larger than the selected size before sending.
•
Movies cannot be resized.
Sending Multiple Images
1
Choose [Select and send].
z z q><r> buttons to choose
[Select and send], and then press the
< m> button.
2
Choose images.
z z o><p><q><r> buttons to choose an image to send, and then press the < m> button. [ ] is displayed.
z z m> button again. [ ] is no longer displayed.
z z images.
z z the < n> button.
3
Send the images.
z z q><r> buttons to choose
[Send], and then press the < m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
140
•
Up to 50 images can be sent together at once. One movie up to five minutes
(or one digest movie up to 13 minutes) can be sent. However, Web services may limit the number of images or length of movies you can send. For details, refer to the Web service you are using.
•
You can also choose images in step 2 by moving the zoom lever twice toward
< k> to access single-image display and then pressing the <q><r> buttons.
•
In step 3, you can choose the desired resolution (size) of your images before
).
Adding Comments
Using the camera, you can add comments to images that you send to e-mail addresses, social networking services, etc. The number of characters and symbols that can be entered may differ depending on the Web service.
Before Use
Basic Guide
Advanced Guide
Camera Basics
1
Access the screen for adding comments.
z z o><p><q><r> buttons to choose [ ], and then press the < m> button.
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
2
Add a comment (
3
Send the image.
z z
Individually” (
) to send the image.
•
When a comment is not entered, the comment set in CANON iMAGE
GATEWAY is automatically sent.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
141
Saving Images to a Computer
When sending images to a computer, use the computer instead of the camera.
Windows 7 and Mac OS X 10.8 are used here for the sake of illustration.
For other functions, refer to the help system of the relevant software (some software excluded).
1
Display CameraWindow.
z z clicking [Downloads Images From Canon
Camera].
z z displayed when a Wi-Fi connection is established between the camera and computer.
2
Import images.
z z then click [Import Untransferred Images].
z z folder on the computer, in separate folders named by date.
z z after image import is complete. For instructions on viewing images on a
computer, refer to “Software Instruction
•
Movies will take longer to import since the file size is larger than still images.
•
To disconnect from the camera, turn off the camera.
•
You can also specify to save all images or only selected images to the
computer, and you can change the destination folder. Refer to “Software
•
Windows 7: If the screen in step 2 is not displayed, click the [ ] icon in the taskbar.
•
Mac OS: If CameraWindow is not displayed, click the [CameraWindow] icon in the Dock.
•
Although you can save images to a computer simply by connecting your camera to the computer without using the software, the following limitations apply.
- It may take a few minutes after you connect the camera to the computer until camera images are accessible.
- Images shot in vertical orientation may be saved in horizontal orientation.
- Image protection settings may be cleared from images saved to a computer.
- Some problems may occur when saving images or image information, depending on the operating system version, the software in use, or image file sizes.
- Some functions provided by the software may not be available, such as movie editing.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
142
Using the < > Button
Once you have registered a smartphone or Image Sync (
the < > button, you can connect to the registered destination simply by pressing the < > button.
Registering a Smartphone to the < > Button
Once you have connected to a smartphone initially via Wi-Fi by pressing the
< > button, you can simply press the < > button after that to connect again for viewing and saving camera images on connected devices.
1
Press the < > button.
2
Choose the destination.
z z q><r> buttons to choose [ ], and then press the < m> button.
3
Establish the connection.
z z in steps 5 – 9 in “Connecting to WPS-
Compatible Access Points” (
steps 4 – 6 in “Connecting without an
Access Point” (
z z smartphone, the smartphone nickname is displayed on the camera. (This screen will close in about one minute.) z z import images from the camera. (The camera cannot be used to send images to the smartphone.) z z connection; the camera will automatically turn off.
z z
< > button to connect to the registered smartphone.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
143
•
When you are in the vicinity of an access point that you have previously connected to, the camera will automatically connect to it in step 2. To change access points, select [Switch Network] from the screen that will be displayed when the connection is being established, and follow steps 5 – 9 in “Connecting to WPS-
Compatible Access Points” (
•
All images in the camera can be viewed from the connected smartphone. Note that if you have assigned the < > button, [View
Settings] (
•
One smartphone can be registered to the < > button. If you wish to register a different smartphone, clear the one currently registered
(
Registering Image Sync to the < > Button
By registering Image Sync to the < > button, you can simply press the
< > button to send any unsent images on the memory card to a computer
via CANON iMAGE GATEWAY. For details on Image Sync, see “Sending
Images Automatically (Image Sync)” (
1
Prepare the camera.
z z
–
).
z z computer, and configure the camera settings (
2
Press the < > button.
3
Choose the destination.
z z q><r> buttons to choose
[ ], and then press the < m> button.
z z to any previous access points and send
).
z z
< > button to send images.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
144
Clearing Registered Destinations
z z n> button and choose
[Mobile Device Connect Button] on the
[
z z q><r> buttons to choose
[OK], and then press the < m> button.
z z displayed, press the < m> button.
•
Registered destinations are also cleared when you reset Wi-Fi settings
Sending Images Automatically (Image
Sync)
Images on the memory card that have not been transferred already can be sent to a computer or Web services via CANON iMAGE GATEWAY.
Note that images cannot be sent only to Web services.
Initial Preparations
Install and configure the software on the destination computer.
1
Install the software.
z z connected to the Internet (
).
2
Register the camera.
z z
], and then click [Add new camera].
z z
], and then click [Add new camera].
z z iMAGE GATEWAY (
Choose the camera from which images are to be sent.
z z computer is ready to receive images, the icon changes to [ ].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
145
3
Choose the type of images to send (only when sending movies with images).
z z n> button, and then choose [Wi-Fi Settings] on the [
3] tab
(
).
z z o><p> buttons to choose
[Image Sync], and then press the
< q><r> buttons to choose [Stills/
Movies].
•
To choose a Web service as the destination, follow the steps in “Registering
123 ) to update the camera settings.
Sending Images
Images sent from the camera are automatically saved to the computer.
If the computer that you intend to send images to is turned off, the images will be stored temporarily on the CANON iMAGE GATEWAY server. Stored images are regularly erased, so make sure to turn on the computer and save the images.
z z
choose [ ].
z z images are sent.
z z successfully to the CANON iMAGE
GATEWAY server, [ ] is displayed on the screen.
z z computer when you turn it on.
z z services from the CANON iMAGE
GATEWAY server, even if the computer is off.
•
When sending images, you should use a fully charged battery pack or an AC adapter kit (sold separately,
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
146
•
Even if images were imported to the computer through a different method, any images not sent to the computer via CANON iMAGE GATEWAY will be sent to the computer.
•
Sending is faster when the destination is a computer on the same network as the camera, because images are sent via the access point instead of
CANON iMAGE GATEWAY. Note that images stored on the computer are sent to CANON iMAGE GATEWAY, so the computer must be connected to the
Internet.
Geotagging Images on the Camera
GPS data recorded on a smartphone using the dedicated CameraWindow application (
124 ) can be added to images on the camera. Images are
tagged with information including the latitude, longitude, and elevation.
•
Before shooting, make sure the date and time and your home time
zone are set correctly. (See “Setting the Date and Time” (
Additionally, in [Time Zone] (
destinations that are in other time zones.
•
The smartphone you will use for geotagging must be authorized to
view the images on the camera (
•
Others may be able to locate or identify you by using location data in your geotagged still images or movies. Be careful when sharing these images with others, as when posting images online where many others can view them.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
147
Shooting Remotely
As you check a shooting screen on your smartphone, you can use it to shoot remotely.
1
Secure the camera.
z z camera lens will come out. Lens motion from zooming may also move the camera out of position. Keep the camera still by mounting it on a tripod or taking other measures.
2
Connect the camera and
).
z z
,
), choose [Yes].
3
Choose remote shooting.
z z
) on the smartphone, choose remote shooting.
z z press near the lens, and make sure no objects will obstruct it.
z z shooting, a live image from the camera will be displayed on the smartphone.
z z the camera, and all operations except pressing the power button are disabled.
Before Use
4
Shoot.
z z
•
The camera works in [
G] mode during remote shooting. However, some FUNC. and MENU settings you have configured in advance may be changed automatically.
•
Movie shooting is not available.
•
In camera settings, the smartphone must be allowed to view camera images (
,
).
•
Any jerky subject motion shown on the smartphone due to the connection environment will not affect recorded images.
•
No AF frames are displayed. Capture a test image to check the focus.
•
Captured images are not transferred to the smartphone. Use the smartphone to browse and import images from the camera.
•
Remote control is also possible from the smartphone assigned to the < > button (
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
148
Editing or Erasing Wi-Fi Settings
Edit or erase Wi-Fi settings as follows.
Editing Connection Information
1
Access the Wi-Fi menu
2
Choose a device to edit.
z z o><p><q><r> buttons to choose the icon of the device to edit, and then press the < m> button.
3
Choose [Edit a Device].
z z o><p> buttons to choose
[Edit a Device], and then press the < m> button.
4
Choose a device to edit.
z z o><p> buttons to choose the device to edit, and then press the
< m> button.
Configurable Items
[Change Device Nickname] (
)
[View Settings] (
,
[Erase Connection Info] (
5
Choose an item to edit.
z z o><p> buttons to choose an item to edit, and then press the < m> button.
z z what device or service the camera will access.
4
O
–
O
Connection
c
O
–
Web
Services
–
O
O
O
– –
O O O
–
O
: Configurable – : Not configurable
Changing a Device Nickname
You can change the device nickname (display name) that is displayed on the camera.
z z
), choose [Change
Device Nickname] and press the < m> button.
z z m> button. Use the keyboard displayed to
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
149
Erasing Connection Information
Erase connection information (information about devices that you have connected to) as follows.
z z
Information” (
Connection Info] and press the < m> button.
z z
< q><r> buttons to choose [OK], and then press the < m> button.
z z erased.
Returning the Wi-Fi Settings to Default
Return the Wi-Fi settings to default if you transfer ownership of the camera to another person, or dispose of it.
1
Choose [Wi-Fi Settings].
z z n> button, and then choose [Wi-Fi Settings] on the [
3] tab
(
).
2
Choose [Reset Settings].
3
z z o><p> buttons to choose
[Reset Settings], and then press the
< m> button.
Restore the default settings.
z z q><r> buttons to choose z
[OK], and then press the < m> button.
z
•
Resetting the Wi-Fi settings will also clear all Web service settings. Be sure that you want to reset all Wi-Fi settings before using this option.
•
To reset other settings (aside from Wi-Fi) to defaults, choose [Reset All] in the
[
3] tab (
).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
150
Setting Menu
Customize or adjust basic camera functions for greater convenience
Adjusting Basic Camera Functions ..............
Silencing Camera Operations .............................
Adjusting the Volume ..........................................
Hiding Hints and Tips ..........................................
Date and Time .....................................................
World Clock .........................................................
Lens Retraction Timing .......................................
Using Eco Mode ..................................................
Power-Saving Adjustment ...................................
Screen Brightness ...............................................
Hiding the Start-Up Screen .................................
Formatting Memory Cards ..................................
File Numbering ....................................................
Date-Based Image Storage .................................
Metric / Non-Metric Display .................................
Increasing Touch-Screen Panel Sensitivity .........
Checking Certification Logos ..............................
Display Language ...............................................
Adjusting Other Settings .....................................
Restoring Defaults ...............................................
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
151
Adjusting Basic Camera Functions
MENU (
) functions on the [
3] tab can be configured. Customize commonly used functions as desired, for greater convenience.
Silencing Camera Operations
Silence camera sounds and movies as follows.
z z
•
Operation can also be silenced by holding down the < p> button as you turn the camera on.
•
Sound is not played during movies (
87 ) if you mute camera sounds. To
restore sound during movies, press the < o> button. Adjust volume with the
< o><p> buttons, as needed.
Adjusting the Volume
Adjust the volume of individual camera sounds as follows.
z z z
< m> button.
Choose an item, and then press the
< q><r> buttons to adjust the volume.
Hiding Hints and Tips
Hints and tips are normally shown when you choose FUNC. (
26 ) items. If you prefer, you can deactivate this information.
Display of hints and tips for camera functions can be deactivated, but menu
(
26 ) explanations will still be displayed.
z z
[Off].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
152
Date and Time
Adjust the date and time as follows.
z z z
< m> button.
z q><r> buttons to choose an option, and then press the < o><p> buttons to adjust the setting.
World Clock
To ensure that your shots will have the correct local date and time when you travel abroad, simply register the destination in advance and switch to that time zone. This convenient feature eliminates the need to change the Date/
Time setting manually.
Before using the world clock, be sure to set the date and time and your
home time zone, as described in “Setting the Date and Time” (
1
Specify your destination.
z z z
< m> button.
z o><p> buttons to choose
[ World], and then press the < m> button.
z z q><r> buttons to choose the destination.
z z ahead), choose [ ] by pressing the
< o><p> buttons, and then choose [ ] by pressing the < q><r> buttons.
z z m> button.
2
Switch to the destination time zone.
z z o><p> buttons to choose
[ World], and then press the < n> button.
z z
] is now shown on the shooting screen
•
Adjusting the date or time while in [ ] mode (
update your [ Home] time and date.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
153
Lens Retraction Timing
The lens is normally retracted for safety about one minute after you press the <
1> button in Shooting mode (
). To have the lens retracted immediately after you press the <
1> button, set the retraction timing to [0 sec.].
z z
[0 sec.].
Using Eco Mode
This function allows you to conserve battery power in Shooting mode. When the camera is not in use, the screen quickly darkens to reduce battery consumption.
1
Configure the setting.
z z
[On].
z z
] is now shown on the shooting
).
z z is not used for approximately two seconds; approximately ten seconds after darkening, the screen turns off.
The camera turns off after approximately three minutes of inactivity.
2
Shoot.
z z shooting when the screen is off but the lens is still out, press the shutter button halfway.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
154
Power-Saving Adjustment
Adjust the timing of automatic camera and screen deactivation (Auto Power
Down and Display Off, respectively) as needed (
z z the < m> button.
z z
< q><r> buttons to adjust it as needed.
•
To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
•
The [Display Off] setting is applied even if you set [Auto Power Down] to [Off].
•
These power-saving functions are not available when you have set Eco mode
Before Use
Screen Brightness
Adjust screen brightness as follows.
Basic Guide
Advanced Guide
z z press the < q><r> buttons to adjust the brightness.
Camera Basics
•
For maximum brightness, press and hold the < p> button for at least one second when the shooting screen is displayed or when in single-image display.
(This will override the [LCD Brightness] setting on the [
3] tab.) To restore the original brightness, press and hold the < p> button again for at least one second or restart the camera.
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Hiding the Start-Up Screen
If you prefer, you can deactivate display of the start-up screen normally shown when you turn the camera on.
Setting Menu
Accessories
z z choose [Off].
Appendix
Index
155
Formatting Memory Cards
Before using a new memory card or a card formatted in another device, you should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy images on the memory card to a computer, or take other steps to back them up.
1
Access the [Format] screen.
z z
< m> button.
2
Choose [OK].
z z o><p> buttons to choose
[Cancel], press the < q><r> buttons to choose [OK], and then press the < m> button.
3
Format the memory card.
z z the < o><p> buttons to choose [OK], and then press the < m> button.
z z card formatting complete] is displayed.
Press the < m> button.
•
Formatting or erasing data on a memory card only changes file management information on the card and does not erase the data completely. When transferring or disposing of memory cards, take steps to protect personal information if necessary, as by physically destroying cards.
•
The total card capacity indicated on the formatting screen may be less than the advertised capacity.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Low-Level Formatting
Perform low-level formatting in the following cases: [Memory card error] is displayed, the camera is not working correctly, card image reading/writing is slower, continuous shooting is slower, or movie recording suddenly stops.
Low-level formatting erases all data on a memory card. Before low-level formatting, copy images on the memory card to a computer, or take other steps to back them up.
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
z z
Memory Cards” (
< o><p> buttons to choose [Low Level
Format], and then press the < q><r> buttons to select this option. A [ ] icon is displayed.
z z
Cards” (
formatting process.
Setting Menu
Accessories
Appendix
Index
156
•
Low-level formatting takes longer than “Formatting Memory Cards” (
because data is erased from all storage regions of the memory card.
•
You can cancel low-level formatting in progress by choosing [Stop]. In this case, all data will be erased, but the memory card can be used normally.
File Numbering
Your shots are automatically numbered in sequential order (0001 – 9999) and saved in folders that store up to 2,000 images each. You can change how the camera assigns file numbers.
Continuous
Auto Reset z z choose an option.
Images are numbered consecutively (until the 9999th shot is taken/ saved) even if you switch memory cards.
Image numbering is reset to 0001 if you switch memory cards, or when a new folder is created.
•
Regardless of the option selected in this setting, shots may be numbered consecutively after the last number of existing images on newly inserted memory cards. To start saving shots from 0001, use an empty (or formatted
(
)) memory card.
•
Refer to “Software Instruction Manual” (
169 ) for information on the card
folder structure and image formats.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
157
Date-Based Image Storage
Instead of saving images in folders created each month, you can have the camera create folders each day you shoot to store shots taken that day.
z z
[Daily].
z z created on the shooting date.
Metric / Non-Metric Display
Change the unit of measurement shown in GPS elevation information
(
) and elsewhere from m/cm to ft/in as needed.
z z
Increasing Touch-Screen Panel Sensitivity
Sensitivity of the touch-screen panel can be increased, so that the camera responds to a lighter touch.
z z choose [High].
Checking Certification Logos
Some logos for certification requirements met by the camera can be viewed on the screen. Other certification logos are printed in this guide, on the camera packaging, or on the camera body.
z z then press the < m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
158
Display Language
Change the display language as needed.
z z
], and then press z the < m> button.
Press the < o><p><q><r> buttons to choose a language, and then press the
< m> button.
•
You can also access the [Language] screen in Playback mode by pressing and holding the < m> button and immediately pressing the <n> button.
Adjusting Other Settings
The following settings can also be adjusted on the [
3] tab.
•
[Video System] (
•
[Ctrl via HDMI] (
)
•
[Wi-Fi Settings] (
•
[Mobile Device Connect Button] (
Restoring Defaults
If you accidentally change a setting, you can restore default camera settings.
1
Access the [Reset All] screen.
z z
< m> button.
2
Restore default settings.
z z q><r> buttons to choose
[OK], and then press the < m> button.
z z
•
The following functions are not restored to default settings.
- Information registered using Face ID (
)
- [
3] tab settings [Date/Time] ( =
),
[Language
)
- Custom white balance data you have recorded (
-
)
- Wi-Fi settings (
)
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
159
Accessories
Enjoy the camera in more ways with optional Canon accessories and other compatible accessories sold separately
System Map ....................................................
Optional Accessories.....................................
Power Supplies ...................................................
Flash Unit ............................................................
Other Accessories ...............................................
Printers ................................................................
Using Optional Accessories..........................
Playback on a TV ................................................
Powering the Camera with Household Power .....
Using the Software .........................................
Software ..............................................................
Computer Connections via a Cable ....................
Saving Images to a Computer .............................
Printing Images ..............................................
Easy Print ............................................................
Configuring Print Settings ...................................
Printing Movie Scenes ........................................
Adding Images to the Print List (DPOF) ..............
Adding Images to a Photobook ...........................
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
160
System Map
Included Accessories
Wrist Strap Battery Pack
NB-12L* 1
Battery Charger
CB-2LG/CB-2LGE* 1
USB Cable (camera end: Mini-B)*
2
Power
Memory Card Card Reader
HDMI Cable
(camera end: Type D)*
3
Cables
Computer
AC Adapter Kit
ACK-DC100
Stereo AV Cable AVC-DC400ST
TV/Video
System
Canon-Brand PictBridge-Compatible Printers Flash Unit
High-Power Flash
HF-DC2
*1 Also available for purchase separately.
*2 A genuine Canon accessory is also available (Interface Cable IFC-400PCU).
*3 Use a commercially available cable no longer than 2.5 m.
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine
Canon accessories.
Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis.
Note that availability varies by area, and some accessories may no longer be available.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
161
Optional Accessories
The following camera accessories are sold separately. Note that availability varies by area, and some accessories may no longer be available.
Power Supplies
Battery Pack NB-12L
z z
Battery Charger CB-2LG/CB-2LGE
z z
•
The message [Battery communication error] is displayed if you use a non-genuine Canon battery pack, and user response is required.
Note that Canon shall not be liable for any damages resulting from accidents, such as malfunction or fire, that occur due to use of nongenuine Canon battery packs.
•
The battery pack includes a convenient cover which you can attach to know the charging status at a glance. Attach the cover so that
is visible on a charged battery pack, and attach it so that
is not visible on an uncharged battery pack.
AC Adapter Kit ACK-DC100
z z household power. Recommended when using the camera over extended periods, or when connecting the camera to a printer or computer. Cannot be used to charge the battery pack in the camera.
•
The battery charger and AC adapter kit can be used in areas with
100 – 240 V AC power (50/60 Hz).
•
For power outlets in a different format, use a commercially available adapter for the plug. Never use an electrical transformer designed for traveling, which may damage the battery pack.
Flash Unit
High-Power Flash HF-DC2
z z that are out of range of the built-in flash.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
162
Other Accessories
Interface Cable IFC-400PCU
z z or printer.
Stereo AV Cable AVC-DC400ST
z z playback on the larger TV screen.
Printers
Canon-Brand PictBridge-
Compatible Printers
z z possible by connecting the camera to a Canon-brand PictBridge-compatible printer.
For details, visit your nearest Canon retailer.
Still Images
Using Optional Accessories
Movies
Still Images Movies
Playback on a TV
By connecting the camera to a TV, you can view your shots on the larger screen of the TV.
For details on connection or how to switch inputs, refer to the TV manual.
•
Some information may not be displayed on the TV (
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
163
Still Images Movies
Playback on a High-Definition TV
You can view your shots on a TV by connecting the camera to an HDTV with a commercially available HDMI cable (not exceeding 2.5 m, with a
Type D terminal on the camera end). Movies shot at a resolution of [ or [
] can be viewed in high definition.
]
1
Make sure the camera and TV are off.
2
Connect the camera to the TV.
z z the HDMI input as shown.
z z and insert the cable plug fully into the camera terminal.
4
Turn the camera on.
z z 1> button to turn the camera on.
z z displayed on the TV. (Nothing is displayed on the camera screen.) z z
TV before disconnecting the cable.
•
Touch-screen operations are not supported while the camera is connected to a television.
•
Camera operating sounds are not played while the camera is connected to an
HDTV.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
3
Turn the TV on and switch to video input.
z z connected the cable to in step 2.
164
Still Images Movies
Controlling the Camera with a TV Remote
Connecting the camera to an HDMI CEC-compatible TV enables playback
(including slideshow playback) using the TV remote control.
Depending on the TV, you may need to adjust some TV settings. For details, refer to the TV manual.
1
Configure the setting.
z z n> button, choose
[Ctrl via HDMI] on the [
3] tab, and then
2
Connect the camera to the TV.
z z
High-Definition TV” (
) to connect the camera to the TV.
3
Display images.
z z
<
1> button.
z z displayed on the TV. (Nothing is displayed on the camera screen.)
4
Control the camera with the TV remote.
z z q><r> buttons on the remote to browse images.
z z press the OK/Select button. Select control panel options by pressing the
< q><r> buttons to choose an option, and then pressing the OK/Select button again.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
165
Camera Control Panel Options Shown on the TV
Return
.
Group Playback
Play Movie
Slideshow
Index Playback l Change Display
Closes the menu.
) or images shot in [ ] mode (
grouped image is selected.)
Starts movie playback. (Only displayed when a movie is selected.)
Starts slideshow playback. To switch images during playback, press the < q><r> buttons on the remote control.
Displays multiple images in an index.
Switches display modes (
•
Pressing buttons, such as the < n> button, on the camera will switch control to the camera itself, which will prevent remote control until you return to single-image display.
•
Moving the zoom lever on the camera will switch control to the camera itself, which will prevent remote control until you return to single-image display.
•
The camera may not always respond correctly even if the remote is for an
HDMI CEC-compatible TV.
Still Images Movies
Playback on a Standard-Definition TV
Connecting the camera to a TV with the Stereo AV Cable AVC-DC400ST
(sold separately) enables you to view your shots on the larger screen of the
TV as you control the camera.
Yellow
Yellow
White
Red
1
Make sure the camera and TV are off.
2
Connect the camera to the TV.
z z the video inputs as shown.
Red
White z z and insert the cable plug fully into the camera terminal.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
166
3
Display images.
z z
High-Definition TV” (
) to display images.
•
Correct display is not possible unless the camera video output format (NTSC or PAL) matches the TV format. To change the video output format, press the < n> button and choose [Video
System] on the [
3] tab.
•
Touch-screen operations are not supported while the camera is connected to a television.
•
When the camera and TV are connected, you can also shoot while previewing shots on the larger screen of the TV. To shoot, follow the same steps as when using the camera screen. However, AF-Point Zoom (
) is not available.
Also, note that TV output is not available in [ ] (
] mode.
Still Images Movies
Powering the Camera with Household Power
Powering the camera with AC Adapter Kit ACK-DC100 (sold separately) eliminates the need to monitor the remaining battery level.
1
Make sure the camera is off.
2
Open the cover.
z z
open the memory card/battery cover, and then open the coupler cable port cover as shown.
3
Insert the coupler.
z z shown, just as you would a battery pack
(following step 2 in “Inserting the Battery
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Terminals
167
z z through the port.
Coupler Cable Port
4
Close the cover.
z z you slide it, until it clicks into the closed position ( ).
5
Connect the power cord.
z z compact power adapter, and then plug the other end into a power outlet.
z z z z unplug the power cord from the outlet.
•
Do not disconnect the adapter or unplug the power cord while the camera is still on. This may erase your shots or damage the camera.
•
Do not attach the adapter or adapter cord to other objects. Doing so could result in malfunction or damage to the product.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
168
Using the Software
The software available for download from the Canon website is introduced below, with instructions for installation and saving images to a computer.
Software
After downloading the software from the Canon website and installing it, you can do the following things on your computer.
CameraWindow
z z
ImageBrowser EX
z z z z
•
Internet access is required, and any ISP account charges and access fees must be paid separately.
Software Instruction Manual
Refer to the instruction manual when using the software. The manual can be accessed from the help system of software (some software excluded).
Computer Connections via a Cable
Checking Your Computer Environment
The software can be used on the following computers. For detailed system requirements and compatibility information, including support in new operating systems, visit the Canon website.
Operating
System*
Windows
Windows 8/8.1
Windows 7 SP1
Windows Vista SP2
Windows XP SP3
Mac OS
Mac OS X 10.9
Mac OS X 10.8.2 or later
Mac OS X 10.7
*
When sending images to a computer via Wi-Fi, check the system requirements in
“Checking Your Computer Environment” (
•
Check the Canon website for the latest system requirements, including supported OS versions.
Installing the Software
For software installation instructions, see “Installing the Software” (
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
169
Saving Images to a Computer
Windows 7 and Mac OS X 10.8 are used here for the sake of illustration.
For other functions, refer to the help system of the relevant software (some software excluded).
1
Connect the camera to the computer.
z z cover ( ). With the smaller plug of the
USB cable in the orientation shown, insert the plug fully into the camera terminal ( ).
z z in the computer’s USB port. For details about USB connections on the computer, refer to the computer user manual.
2
Turn the camera on to access
CameraWindow.
z z 1> button to turn the camera on.
z z when a connection is established between the camera and computer.
CameraWindow
3
z z below.
z z
] link to modify the program.
z z
Camera] and then click [OK].
z z
].
Save the images to the computer.
z z then click [Import Untransferred Images].
z z folder on the computer, in separate folders named by date.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
170
z z
CameraWindow, press the <
1> button to turn the camera off, and unplug the cable.
z z
computer, refer to “Software Instruction
•
Windows 7: If the screen in step 2 is not displayed, click the [ ] icon in the taskbar.
•
Windows Vista or XP: To start CameraWindow, click [Downloads Images From
Canon Camera] on the screen displayed when you turn the camera on in step
2. If CameraWindow is not displayed, click the [Start] menu and choose [All
Programs]
► [Canon Utilities] ► [CameraWindow] ► [CameraWindow].
•
Mac OS: If CameraWindow is not displayed after step 2, click the
[CameraWindow] icon in the Dock.
•
Although you can save images to a computer simply by connecting your camera to the computer without using the software, the following limitations apply.
- It may take a few minutes after you connect the camera to the computer until camera images are accessible.
- Images shot in vertical orientation may be saved in horizontal orientation.
- Image protection settings may be cleared from images saved to a computer.
- Some problems may occur when saving images or image information, depending on the operating system version, the software in use, or image file sizes.
- Some functions provided by the software may not be available, such as movie editing.
Still Images Movies
Printing Images
Your shots can easily be printed by connecting the camera to a printer. On the camera, you can specify images to set up batch printing, prepare orders for photo development services, and prepare orders or print images for photobooks.
A Canon SELPHY CP series compact photo printer is used here for the sake of illustration. Screens displayed and available functions vary by printer. Also refer to the printer manual for additional information.
Still Images
Easy Print
Easily print your shots by connecting the camera to a PictBridge-compatible printer (sold separately) with the USB cable.
1
Make sure the camera and printer are off.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
171
2
Connect the camera to the printer.
z z cable plug in the orientation shown, insert the plug fully into the camera terminal.
z z printer. For other connection details, refer to the printer manual.
3
Turn the printer on.
4
Turn the camera on.
z z 1> button to turn the camera on.
5
Choose an image.
z z q><r> buttons to choose an image.
6
Access the printing screen.
z z m> button, choose [c], and press the < m> button again.
7
Print the image.
z z o><p> buttons to choose
[Print], and then press the < m> button.
z z z z procedures starting from step 5 after printing is finished.
z z camera and printer off and disconnect the cable.
•
For Canon-brand PictBridge-compatible printers (sold separately), see
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
172
Still Images
Configuring Print Settings
1
Access the printing screen.
z z
(
–
at left.
2
Configure the settings.
z z o><p> buttons to choose an item, and then press the < q><r> buttons to choose an option.
Before Use
Cropping
Paper
Settings
Default
Date
File No.
Both
Matches current printer settings.
Prints images with the date added.
Prints images with the file number added.
Prints images with both the date and file number added.
–
Off
Default
Off
Matches current printer settings.
–
On
Uses information from the time of shooting to print under optimal settings.
Red-Eye 1 Corrects red-eye.
No. of Copies Choose the number of copies to print.
–
Specify a desired image area to print (
–
Specify the paper size, layout, and other details
(
).
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
173
Still Images
Cropping Images before Printing
By cropping images before printing, you can print a desired image area instead of the entire image.
1
Choose [Cropping].
z z
screen, choose [Cropping] and press the
< m> button.
z z indicating the image area to print.
2
Adjust the cropping frame as needed.
z z lever.
z z
< o><p><q><r> buttons.
z z m> button.
z z n> button, press the
< o><p> buttons to choose [OK], and then press the < m> button.
3
Print the image.
z z
) to print.
•
Cropping may not be possible at small image sizes, or at some aspect ratios.
•
Dates may not be printed correctly if you crop images shot with
[Date Stamp ] selected.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
174
Still Images
Choosing Paper Size and Layout before Printing
1
Choose [Paper Settings].
z z
screen, choose [Paper Settings] and press the < m> button.
2
Choose a paper size.
z z o><p> buttons to choose an option, and then press the < m> button.
3
Choose a type of paper.
z z o><p> buttons to choose an option, and then press the < m> button.
4
Choose a layout.
z z o><p> buttons to choose an option.
z z
< q><r> buttons to specify the number of images per sheet.
z z m> button.
5
Print the image.
Available Layout Options
Default
Bordered
Borderless
N-up
ID Photo
Fixed Size
Matches current printer settings.
Prints with blank space around the image.
Borderless, edge-to-edge printing.
Choose how many images to print per sheet.
Prints images for identification purposes.
Only available for images with a resolution of L and an aspect ratio of
4:3.
Choose the print size.
Choose from 3.5 x 5 in., postcard, or wide-format prints.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
175
Still Images
Printing ID Photos
1
Choose [ID Photo].
z z
Size and Layout before Printing”
(
), choose [ID Photo] and press the < m> button.
2
Choose the long and short side length.
z z o><p> buttons to choose an item. Choose the length by pressing the < q><r> buttons, and then press the
< m> button.
3
Choose the printing area.
z z
Printing” (
) to choose the printing area.
4
Print the image.
Movies
Printing Movie Scenes
1
Access the printing screen.
z z
) to choose a movie. The screen at left is displayed.
z z q><r> buttons to choose
[ c], and then press the <m> button.
The screen at left is displayed.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
2
Choose a printing method.
z z o><p> buttons to choose
[ ], and then press the < q><r> buttons to choose the printing method.
3
Print the image.
Setting Menu
Accessories
Appendix
Index
176
Movie Printing Options
Single
Sequence
Prints the current scene as a still image.
Prints a series of scenes, a certain interval apart, on a single sheet of paper. You can also print the folder number, file number, and elapsed time for the frame by setting [Caption] to [On].
•
To cancel printing in progress, press the < m> button.
•
[ID Photo] and [Sequence] cannot be chosen on Canon-brand PictBridgecompatible printers from CP720/CP730 and earlier models.
Adding Images to the Print List (DPOF)
Still Images
) and ordering prints from a photo development service can be set up on the camera. Choose up to 998 images on a memory card and configure relevant settings, such as the number of copies, as follows. The printing information you prepare this way will conform to
DPOF (Digital Print Order Format) standards.
Still Images
Configuring Print Settings
Specify the printing format, whether to add the date or file number, and other settings as follows. These settings apply to all images in the print list.
z z n> button, and then choose [Print Settings] on the [
2] tab.
Choose and configure items as desired
Print Type
Date
File No.
Clear DPOF data
Standard
Index
Both
On
Off
On
Off
On
Off
One image is printed per sheet.
Smaller versions of multiple images are printed per sheet.
Both standard and index formats are printed.
Images are printed with the shooting date.
–
Images are printed with the file number.
–
All image print list settings are cleared after printing.
–
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
177
•
Not all of your DPOF settings may be applied in printing by the printer or photo development service, in some cases.
•
[ ] may be displayed on the camera to warn you that the memory card has print settings that were configured on another camera.
Changing the print settings using this camera may overwrite all previous settings.
•
Setting [Date] to [On] may cause some printers to print the date twice.
•
Specifying [Index] will prevent you from choosing [On] for both [Date] and [File
No.] at the same time.
•
Index printing is not available on some Canon-brand PictBridge-compatible printers (sold separately).
•
The date is printed in a format matching setting details in [Date/Time] on the
[
).
Still Images
Setting Up Printing for Individual Images
1
Choose [Select Images & Qty.].
z z n> button, choose
[Select Images & Qty.] on the [
2] tab, and then press the < m> button.
2
Choose an image.
z z q><r> buttons to choose an image, and then press the < m> button.
z z copies.
z z it is labeled with a [ ] icon. To cancel index printing for the image, press the
< m> button again. [ ] is no longer displayed.
3
Specify the number of prints.
z z o><p> buttons to specify the number of prints (up to 99).
z z specify the number of prints, repeat steps
2 – 3.
z z index prints. You can only choose which images to print, by following step 2.
z z n> button to return to the menu screen.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
178
Still Images
Setting Up Printing for a Range of Images
z z
), choose
[Select Range] and press the < m> button.
z z
(
) to specify images.
z z o><p> buttons to choose
[Order], and then press the < m> button.
Still Images
Setting Up Printing for All Images
z z
), choose
[Select All Images] and press the < m> button.
z z q><r> buttons to choose
[OK], and then press the < m> button.
Before Use
Still Images
Clearing All Images from the Print List
z z for Individual Images” (
[Clear All Selections] and press the < m> button.
z z q><r> buttons to choose
[OK], and then press the < m> button.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Still Images
Printing Images Added to the Print List (DPOF)
z z print list (
), the screen at left is displayed after you connect the camera to a PictBridge-compatible printer. Press the < o><p> buttons to choose [Print now], and then simply press the < m> button to print the images in the print list.
z z stop will be resumed from the next image.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
179
Still Images
Adding Images to a Photobook
Photobooks can be set up on the camera by choosing up to 998 images on a memory card and importing them into the software on your computer, where they are stored in their own folder. This is convenient when ordering printed photobooks online or printing photobooks with your own printer.
Choosing a Selection Method
z z n> button, choose
[Photobook Set-up] on the [
1] tab, and then choose how you will select images
(
).
•
[ ] may be displayed on the camera to warn you that the memory card has print settings that were configured on another camera.
Changing the print settings using this camera may overwrite all previous settings.
•
After importing images to your computer, also refer to “Software Instruction
169 ) and the printer manual for further information.
Before Use
Still Images
Adding Images Individually
1
Choose [Select].
z z
[Select] and press the < m> button.
Basic Guide
Advanced Guide
Camera Basics
2
Choose an image.
z z q><r> buttons to choose an image, and then press the < m> button.
z z
] is displayed.
z z press the < m> button again. [ ] is no longer displayed.
z z images.
z z n> button to return to the menu screen.
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
180
Still Images
Adding All Images to a Photobook
z z
[Select All Images] and press the < m> button.
z z q><r> buttons to choose
[OK], and then press the < m> button.
Still Images
Removing All Images from a Photobook
z z
[Clear All Selections] and press the < m> button.
z z q><r> buttons to choose
[OK], and then press the < m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
181
Appendix
Helpful information when using the camera
Troubleshooting .............................................
On-Screen Messages .....................................
On-Screen Information ..................................
Shooting (Information Display) ............................
Playback (Detailed Information Display) .............
Functions and Menu Tables ..........................
Functions Available in Each Shooting Mode .......
FUNC. Menu .......................................................
4 Shooting Tab Menu........................................
3 Set Up Tab Menu ...........................................
1 Playback Tab Menu .......................................
2 Print Tab Menu ...............................................
Playback Mode FUNC. Menu ..............................
Handling Precautions ....................................
Specifications .................................................
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
182
Troubleshooting
If you think there is a problem with the camera, first check the following.
If the items below do not solve your problem, contact a Canon Customer
Support Help Desk.
Power
Nothing happens when the power button is pressed.
•
Confirm that the battery pack is charged ( =
).
•
Confirm that the battery pack is inserted facing the correct way ( =
).
•
Confirm that the memory card/battery cover is fully closed (
•
Dirty battery terminals reduce battery performance. Try cleaning the terminals with a cotton swab and reinserting the battery pack a few times.
The battery pack runs out of power quickly.
•
Battery performance decreases at low temperatures. Try warming the battery pack a little by putting it in your pocket, for example, ensuring that the terminals do not touch any metal objects.
•
If these measures do not help and the battery pack still runs out of power soon after charging, it has reached the end of its life. Purchase a new battery pack.
The lens is not retracted.
•
Do not open the memory card/battery cover while the camera is on. Close the cover,
turn the camera on, and then turn it off again (
).
The battery pack is swollen.
•
Battery swelling is normal and does not pose any safety concerns. However, if battery swelling prevents the battery pack from fitting in the camera, contact a Canon
Customer Support Help Desk.
Display on a TV
Camera images look distorted or not displayed on a TV (
).
Shooting
Cannot shoot.
•
), press the shutter button halfway (
Strange display on the screen under low light (
Strange display on the screen when shooting.
Note that the following display problems are not recorded in still images but are recorded in movies.
•
The screen may flicker and horizontal banding may appear under fluorescent or LED lighting.
No date stamp is added to images.
•
Configure the [Date Stamp
39 ). Note that date stamps are not
added to images automatically, merely because you have configured the [Date/Time]
•
Date stamps are not added in shooting modes (
) in which this setting cannot be configured (
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
183
[
h] flashes on the screen when the shutter button is pressed, and
[
] is displayed when the shutter button is pressed halfway (
•
Set [IS Mode] to [Continuous] (
•
Raise the flash and set the flash mode to [ h] (
•
Increase the ISO speed (
•
Mount the camera on a tripod or take other measures to keep it still. In this case, you should set [IS Mode] to [Off] (
Shots are out of focus.
•
Press the shutter button halfway to focus on subjects before pressing it all the way down to shoot (
).
•
Make sure subjects are within focusing range (
•
Set [AF-assist Beam] to [On] (
•
Confirm that unneeded functions such as macro are deactivated.
•
Try shooting with focus lock or AF lock (
Shots are blurry.
•
Blurring may occur more often when Touch Shutter is used to shoot, depending on shooting conditions. Hold the camera still when shooting.
No AF frames are displayed and the camera does not focus when the shutter button is pressed halfway.
•
To have AF frames displayed and the camera focus correctly, try composing the shot with higher-contrast subject areas centered before you press the shutter button halfway. Otherwise, try pressing the shutter button halfway repeatedly.
Subjects in shots look too dark.
•
Raise the flash and set the flash mode to [
).
•
Adjust brightness by using exposure compensation (
•
Adjust contrast by using i-Contrast (
).
•
Use AE lock or spot metering (
).
Subjects look too bright, highlights are washed-out.
•
Lower the flash and set the flash mode to [
).
•
Adjust brightness by using exposure compensation (
•
Use AE lock or spot metering (
).
•
Reduce the lighting on subjects.
Shots look too dark despite the flash firing (
•
Shoot within flash range (
).
•
).
Subjects in flash shots look too bright, highlights are washed-out.
•
Shoot within flash range (
).
•
Lower the flash and set the flash mode to [
).
The sub-window is dark.
•
The sub-window may be darker than the shooting screen in some shooting conditions.
White dots or similar image artifacts appear in flash shots.
•
This is caused by light from the flash reflecting off dust or airborne particles.
Shots look grainy.
•
).
•
High ISO speeds in some shooting modes may cause grainy images (
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
184
Subjects are affected by red-eye (
•
Set [Red-Eye Lamp] to [On] (
52 ) to activate the red-eye reduction lamp
(
) in flash shots. For best results, have subjects look at the red-eye reduction lamp. Also try increasing the lighting in indoor scenes and shooting at closer range.
•
Edit images using red-eye correction (
).
Recording to the memory card takes too long, or continuous shooting is slower.
•
Use the camera to perform low-level formatting of the memory card (
Shooting settings or FUNC. menu settings are not available.
•
Available setting items vary by shooting mode. Refer to “Functions Available in Each
Shooting Mode”, “FUNC. Menu”, and “Shooting Tab Menu” (
).
The Babies or Children icon does not display.
•
The Babies and Children icons will not display if the birthday is not set in face
). If the icons still do not display even when you set the birthday, re-register face information (
42 ), or make sure that the date/time are set
).
Touch AF or Touch Shutter does not work.
•
Touch AF or Touch Shutter will not work if you touch the edges of the screen. Touch closer to the center of the screen.
The sub-window is in the wrong orientation.
•
Sub-window images may be displayed or recorded in a different orientation if you rotate the camera when shooting or recording and [Set Story Cam.] is set to [Non-
,
).
Set it to [Mirror Image] for display and recording in the correct orientation.
Shooting Movies
The elapsed time shown is incorrect, or recording is interrupted.
•
Use the camera to format the memory card, or switch to a card that supports highspeed recording. Note that even if the elapsed time display is incorrect, the length
of movies on the memory card corresponds to the actual recording time (
[ ] is displayed and shooting stops automatically.
The camera’s internal memory buffer filled up as the camera could not record to the memory card quickly enough. Try one of the following measures.
•
Use the camera to perform low-level formatting of the memory card (
).
•
Lower the image quality (
•
Switch to a memory card that supports high-speed recording (
Zooming is not possible.
•
Zooming is not possible when shooting movies in [
).
Subjects look distorted.
•
Subjects that pass in front of the camera quickly may look distorted. This is not a malfunction.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
185
Playback
Playback is not possible.
•
Image or movie playback may not be possible if a computer is used to rename files or
alter the folder structure. Refer to “Software Instruction Manual” (
on folder structure and file names.
Playback stops, or audio skips.
•
Switch to a memory card that you have performed low-level formatting on with the camera (
).
•
There may be brief interruptions when playing movies copied to memory cards that have slow read speeds.
•
When movies are played on a computer, frames may be dropped and audio may skip if computer performance is inadequate.
Sound is not played during movies.
•
Adjust the volume (
87 ) if you have activated [Mute] (
the movie is faint.
•
No sound is played for movies shot in [ ] mode (
recorded in this mode.
Cannot access the home screen by pressing the < > button.
•
Home screen display is not possible unless the memory card contains still images.
Take a shot.
•
Home screen display is not possible when connected to a printer. Disconnect the camera from the printer.
•
Home screen display is not possible during Wi-Fi connections. End the Wi-Fi connection.
A desired subject icon for an album is not displayed on the Story
Highlights home screen.
•
Choose an image that shows the name of the person for the album before accessing the Story Highlights home screen (
).
Memory Card
The memory card is not recognized.
•
Restart the camera, with the memory card in it (
Computer
Cannot transfer images to a computer.
When attempting to transfer images to the computer via a cable, try reducing the transfer speed as follows.
•
Press the <
1> button to enter Playback mode. Hold the <n> button down as you press the < o> and <m> buttons at the same time. On the next screen, press the < q><r> buttons to choose [B], and then press the <m> button.
Wi-Fi
Cannot access the Wi-Fi menu by pressing the < > button.
•
The Wi-Fi menu is not available in Shooting mode. Switch to Playback mode and try again.
•
In Playback mode, the Wi-Fi menu cannot be accessed during detailed information display, magnified display, or index display. Switch to single-image display and a viewing mode other than detailed information display. Similarly, the Wi-Fi menu cannot be accessed during group playback or filtered image display according to specified conditions. Cancel group or filtered image playback.
•
The Wi-Fi menu cannot be accessed while the camera is connected to a printer, computer, or TV via a cable. Disconnect the cable.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
186
Cannot add a device/destination.
•
A total of 20 items of connection information can be added to the camera. Erase unneeded connection information from the camera first, and then add new devices/
•
Use a computer or smartphone to register Web services (
).
•
To add a smartphone, first install the dedicated application CameraWindow on your smartphone (
).
•
To add a computer, first install the software CameraWindow on your computer. Also check your computer and Wi-Fi environment and settings (
,
•
Do not use the camera near sources of Wi-Fi signal interference, such as microwave ovens, Bluetooth devices, or other equipment operating on the 2.4 GHz band.
•
Bring the camera closer to the other device you are trying to connect to (such as the access point), and make sure there are no objects between the devices.
Cannot connect to the access point.
•
Confirm that the access point channel is set to a channel supported by the camera
(
202 ). Note that instead of auto channel assignment, it is advisable to specify a
supported channel manually.
Cannot send images.
•
The destination device has insufficient storage space. Increase the storage space on the destination device and resend the images.
•
The write-protect tab of the memory card in the destination camera is set to the locked position. Slide the write-protect tab to the unlocked position.
•
Images are not sent to CANON iMAGE GATEWAY or other Web services if you move or rename image files or folders on the computer that received images sent using
Image Sync via an access point (
145 ). Before moving or renaming these image
files or folders on the computer, make sure the images have already been sent to
CANON iMAGE GATEWAY or other Web services.
Cannot resize images for sending.
•
Images cannot be resized to be bigger than the resolution setting of their original size.
•
Movies cannot be resized.
Images take a long time to send./The wireless connection is disrupted.
•
Multiple images may take a long time to send. Try resizing the image to [ ] or [ ]
•
Movies may take a long time to send.
•
Do not use the camera near sources of Wi-Fi signal interference, such as microwave ovens, Bluetooth devices, or other equipment operating on the 2.4 GHz band. Note that images may take a long time to send even when [ ] is displayed.
•
Bring the camera closer to the other device you are trying to connect to (such as the access point), and make sure there are no objects between the devices.
Want to erase Wi-Fi connection information before disposing of the camera or giving it to someone else.
•
).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
187
On-Screen Messages
If an error message is displayed, respond as follows.
No memory card
•
The memory card may be inserted facing the wrong way. Reinsert the memory card
Memory card locked
•
The write-protect tab of the memory card is set to the locked position. Switch the
write-protect tab to the unlocked position (
).
Cannot record!
•
Shooting was attempted without a memory card in the camera. To shoot, insert a memory card facing the correct way (
•
If the same error message is displayed even after you have formatted a supported
2 ) and have inserted it facing the correct way (
), contact a Canon Customer Support Help Desk.
Insufficient space on card
•
There is not enough free space on the memory card to shoot (
,
)
). Either erase unneeded images (
) or insert a memory card with enough free space (
Touch AF unavailable
•
Touch AF is not available in the current shooting mode (
Touch AF canceled
•
The subject selected for Touch AF can no longer be detected (
).
No Image.
•
The memory card does not contain any images that can be displayed.
Protected! (
)
Unidentified Image/Incompatible JPEG/Image too large./Cannot play back MOV
•
Unsupported or corrupt images cannot be displayed.
•
It may not be possible to display images that were edited or renamed on a computer, or images shot with another camera.
Cannot magnify!/Cannot play back this content in Smart Shuffle/
Cannot rotate/Cannot modify image/Cannot modify/Cannot assign to category/Unselectable image./No identification information/Could not preview album/Could not save album
•
The following functions may be unavailable for images that were renamed or already edited on a computer, or images shot with another camera. Note that starred (*)
functions are not available for movies. Edit ID Info* (
),
Smart Shuffle* (
), Rotate* (
), and Photobook Set-up* (
•
Grouped images cannot be processed (
Invalid selection range
•
When specifying a range for image selection (
,
,
choose an initial image that was after the final image, or vice-versa.
Exceeded selection limit
•
More than 998 images were selected for Print List (
(
). Choose 998 images or less.
•
Print List (
180 ) settings could not be saved
correctly. Reduce the number of selected images and try again.
•
You attempted to choose more than 500 images in Protect (
(
), Print List (
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
188
Naming error!
•
The folder could not be created or images could not be recorded, because the highest supported folder number (999) for storing images on the card has been reached and the highest supported image number (9999) for images in folders has been reached.
On the [
3] tab, change [File Numbering] to [Auto Reset] ( =
).
Lens Error
•
This error may occur if the lens is held while it is moving, or when the camera is used in dusty or sandy locations.
•
Frequent display of this error message may indicate camera damage. In this case, contact a Canon Customer Support Help Desk.
A camera error was detected (error number)
•
If this error message is displayed immediately after a shot, the image may not have been saved. Switch to Playback mode to check for the image.
•
Frequent display of this error message may indicate camera damage. In this case, write down the error number (Exx) and contact a Canon Customer Support Help
Desk.
File Error
•
Correct printing (
) may not be possible for photos from other cameras or images that have been altered using computer software, even if the camera is connected to the printer.
Print error
•
Check the paper size setting (
175 ). If this error message is displayed when the
setting is correct, restart the printer and complete the setting on the camera again.
Ink absorber full
•
Contact a Canon Customer Support Help Desk to request assistance with ink absorber replacement.
Wi-Fi
Connection failed
•
No access points were recognized. Check the access point settings (
).
•
A device could not be found. Turn the camera off and on again, and retry the connection.
•
Check the device you want to connect to and make sure it is ready for connection.
Cannot determine access point
•
The WPS buttons on numerous access points were pressed simultaneously. Try reconnecting again.
No access points found
•
Check to make sure that the access point is turned on.
•
When connecting to an access point manually, make sure that you entered the correct SSID.
Incorrect password/Incorrect Wi-Fi security settings
•
Check the access point security settings (
).
IP address conflict
•
Reset the IP address so that it does not conflict with another.
Disconnected/Receiving failed/Sending failed
•
You may be in an environment where Wi-Fi signals are obstructed.
•
Avoid using the camera’s Wi-Fi function around microwave ovens, Bluetooth devices, and other devices that operate on the 2.4 GHz band.
•
Bring the camera closer to the other device you are trying to connect to (such as the access point), and make sure there are no objects between the devices.
•
Check the connected device to make sure it is not experiencing errors.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
189
Sending failed
Memory card error
•
If the same error message is displayed even when you have inserted a formatted memory card facing the correct way, contact a Canon Customer Support Help Desk.
Receiving failed
Insufficient space on card
•
There is not enough free space on the memory card in the target camera to receive images. Erase images to create space on the memory card, or insert a memory card with sufficient space.
Receiving failed
Memory card locked
•
The write-protect tab of the memory card in the camera to receive the images is set to the locked position. Slide the write-protect tab to the unlocked position.
Receiving failed
Naming error!
•
When the highest folder number (999), and the highest image number (9999) have been reached on the receiving camera, images cannot be received.
Insufficient space on server
•
Delete unnecessary images uploaded to CANON iMAGE GATEWAY to create space.
•
Save the images sent via Image Sync (
Check network settings
•
Check to make sure your computer can connect to the Internet with the current network settings.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
190
On-Screen Information
Shooting (Information Display)
Shooting mode
), Scene
Hybrid Auto mode
Red-eye correction
Flash mode
Metering method
Drive mode
(
)
Mercury lamp
White balance
(
)
)
Camera shake
Self-timer (
IS mode icon
(
)
Battery level
(
Still image compression
(
),
Resolution (
Recordable shots*
(
Movie quality
(
)
Digital zoom magnification
(
), Digital tele-converter
(
)
Remaining time
(
Focusing range
(
,
), AF lock (
Blink detection
(
Spot AE point frame
(
Date stamp
(
i-Contrast (
)
FE lock (
)
Shutter speed
* In [ ] mode, indicates the number of shots available.
Aperture value
Grid lines (
)
)
Image stabilization
Exposure compensation bar
Battery Level
An on-screen icon or message indicates the battery charge level.
Display
(Blinking red)
[Charge the battery]
Details
Sufficient charge
Slightly depleted, but sufficient
Nearly depleted—charge the battery pack soon
Depleted—charge the battery pack immediately
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
191
Playback (Detailed Information Display)
)
Current image no. /
Total no. of images
Histogram (
)
Battery level
)
Wi-Fi signal strength
)
Image Sync
)
Image editing
–
Favorites (
Folder number - File number (
Shooting date/time
(
)
Shooting mode
(
)
Shutter speed (still images), Image quality / Frame rate
(movies) (
,
)
Aperture value
Exposure compensation level
(
), Exposure shift level
ISO speed
(
), Playback
Metering method
(
)
White balance
(
)
,
Focusing range
(
,
)
Red-eye correction
(
,
i-Contrast (
,
Group playback
(
), Image editing (
)
Compression (image
movies (
),
MP4 (movies),
)
File size
•
Some information may not be displayed when viewing images on a TV
(
).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
192
Summary of Movie Control Panel in “Viewing” (
Exit
Touch to display the volume panel, and then touch [ o][p] to adjust the volume. At a volume of 0, [ ] is displayed.
Play
Slow Motion (Press the < q><r> buttons to adjust the playback speed. No sound is played.)
Skip Backward* or Previous Clip (
113 ) (To continue skipping backward,
keep holding down the < m> button.)
Previous Frame (For fast-rewind, keep holding down the < m> button.)
Next Frame (For fast-forward, keep holding down the < m> button.)
113 ) (To continue skipping forward, keep
holding down the < m> button.)
*
Erase Clip (displayed when a digest movie is selected (
)) c
Shown when the camera is connected to a PictBridge-compatible printer
(
* Displays the frame approx. 4 sec. before or after the current frame.
•
During movie playback, you can skip back or forward (or to the previous or next clip) by pressing the < q><r> buttons.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
193
Functions and Menu Tables
Functions Available in Each Shooting Mode
Shooting Mode
G
Function
Exposure Compensation (
)
)
O – –
Focusing Range (
O O
O –
O
– e u
Flash (
O O
O
O
–
–
O
–
– h
Z
!
2
AF Lock (
)
)
)
Touch Shutter (
)
No Information Display
Information Display
*1 Not available, but switches to [
Z] in some cases.
*2 FE lock not available in [
!] flash mode.
*3 Only available when faces are detected.
*4 No tracking, but AF frames can be specified.
*5 Only available for shooting. Subject designation not available.
O O
O –
O
* 1
O O
O –
O
O
–
–
O O
O
* 4
O O
O O
O
–
–
–
O
O
* 1
O
–
O
O
– O
K
I P t
O O O O O O O O O O O O O O –
E
N
– –
O O
– –
O O O O O O O O O O O O O O O O O
– – – – – – – – – – – – – – – – –
O O
–
–
–
–
O O O O O O O O O O O O O O O O O
O
O
–
–
–
–
–
–
O
O
O
O
–
–
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O O
– O
– –
O O
– –
–
–
–
–
O O
O O
O O O O O O – O O O – O O O O –
O O O O O O – O O O – O O O O O
– – – –
* 1
– – – – – – – – – – – –
O O O O O O O O O O O O O O O O O
– – – – – – – – – – – – – – – – –
–
–
–
O
–
–
–
–
O
* 3 * 3 * 3
O – – –
–
–
– – –
– O –
– O –
* 5
O
* 5
–
–
–
* 5
–
–
–
–
–
–
–
* 4
–
–
–
* 4
– – – – O
– O O O O
– O O O O
* 4
O O O O
–
–
–
* 4
– O
O O
O – – – O O O – – – – – – O O O O
O O O O O O O O O O O O O O O O O
O Available or set automatically. – Not available.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
194
FUNC. Menu
Shooting Mode
G
Function
White Balance (
My Colors (
O O
O –
O
–
O
–
O
–
*
1
*
1
Drive Mode (
*
2
O O
O –
O
–
O
–
O
–
O O
– –
O
O
O
–
O
–
* 3
)
O –
O –
O
–
–
–
] [ $
)
Delay*
4
Shots*
5
Metering Method (
O O
O
O
O
O
O
–
O
O
O
O
O
O
O
–
O
O
O
–
O
O
O
–
O
–
O O
–
*1 White balance is not available.
*2 Set in a range of 1 – 5: contrast, sharpness, color saturation, red, green, blue, and skin tone.
*3 [ ] is set with AF lock or [ t].
*4 Cannot be set to 0 seconds in modes without selection of the number of shots.
*5 One shot (cannot be modified) in modes without selection of the number of shots.
–
–
–
I
O O O O O O O O O O O O O O O O O
– O O O – – – – – – – – – – – O O
O O O O O O O O O O O O O O O O O
– O O O – – – – – – – – – – – O O
O O O O O O O O O O O O O O O O O
– – – – – – – – – – – – – – – – –
O
–
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
–
–
O
O
O
O
O
O
O
O
–
–
–
–
O O O O O O O O O O O O O O O O O
O – – – O O O O O O O O O O O O O
O
O
–
–
–
–
K
P t N
E
– O O O O O O O O O O O O O
– O O O O O O O O O O O O –
O O O O O O O O O O O O O O O O O
– – – – – – – – – – – – – – – – –
O Available or set automatically. – Not available.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
195
Shooting Mode
G
Function
Still Image Aspect Ratio (
O –
O –
O O
O –
Resolution (
O O
O –
O –
O –
)
O –
O O
Movie Quality (
O –
O O
O –
*1 Synchronizes with the aspect ratio setting and is automatically set (
).
O
O
O
O
O
O
O
O
–
O
O
O
O
I
K
P t N
E
–
–
–
–
O O
– –
O O O O – O O – O
O O O O – O O – –
–
–
–
–
– O O O O
– O O O O
O O O O O O O O O O O O O O O O O
O O O O – O O – – – – – O O O O –
–
–
O –
– –
– O
– –
O O O O O O O O O O O O O O O O O
O O O O – O O – – – – – – – – O O
O O O O – O O –
O O O O – O O –
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
– –
O O
– – – – – – – – – – – – – – – – –
O O O O O O O O O O O O O O O O O
O –
O O
O –
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
– O O O O O O O O
* 1
O O O O O O O
O O O O O O O O
* 1
O O O O O O O
–
–
O Available or set automatically. – Not available.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
196
4 Shooting Tab Menu
Function
)
Face AiAF
1-point
AF Frame Size (
Normal
Small
)
On
Off
1.5x/2.0x
)
On
Off
Servo AF (
On
Off
Continuous AF (
On
Off
Touch Shutter (
On
Off
*1 [On] when subject movement is detected.
Shooting Mode
G
O
–
O
O
–
–
–
O
O
–
* 1
O
–
O
O
O O
O –
O –
O –
O O
O O
O –
O –
O O
O –
O O
O O
O –
O O
O O
I
K
P t N
E
O O
– O
O O O O O O –
O – – – – O O
–
O
–
–
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
– O
– O
O
O
–
–
–
–
–
–
–
–
O
O
–
–
O
–
–
–
O
O
– O O O O O O
– O O O O O O
– O
O O
– –
O O O O – O O – – – – – – – – O O
O O O O O O O O O O O O O O O O O
– – – – – – – – – – – – – – – – –
O –
O O
O O O O – O – – – – – – O O O O –
O O O O O O O O O O O O O O O O O
– O
O O
O – – – – O – – – – – – O O O – –
O O O O O O O O O O O O O O O O O
O O
– O
O O O O O O – O O O O O O O O O O
O – – – O O O O O O O O O O O O –
O O
O O
O – – – O O O O – O O O O O O O O
O O O O O O O O O O O O O O O O O
O Available or set automatically. – Not available.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
197
Function
AF-assist Beam (
)
On
Off
Flash Settings (
,
Red-Eye Corr.
Display Info
On
Off
Red-Eye Lamp
On
Off
Auto
Off
)
On/Off
)
Auto/Off
Review image after shooting (
Off/Quick
Display Time 2 sec./4 sec./8 sec.
Hold
Off
Detailed
Shooting Mode
G
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
–
–
O
O
O O
O O
O O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
I
K
P t N
E
O O
O O
O O O O O O – O O O O O O O O O O
O – O O O O O O O O O O O O O O O
– O
O O
O O
O O
O O O O O O – – – –
O O O O O O – O O O
O O O O O O – O O O
O O O O O O – O O O
– – – – – O
– O O O O O
– O O O O O
– O O O O O
–
–
–
–
– –
O O
– – – – – – – – – – – – – – – – –
O O O O O O O O O O O O O O O O O
– – – – – – – – – – – – – – – – – – –
O O O O O O O O O O – O O O O O O O O
– O
O O
O O
O O
– O
O O O O O O O O O O O O O O O O
O O O O O O O O O O O O O O O O
O O O O O O O O O O O O O O O O
O O O O O O O O O O O O O O O O
O O O O O O O O O O O O O O O O –
O Available or set automatically. – Not available.
–
–
–
–
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
198
Shooting Mode
G
Function
Blink Detection (
On
Off
)
On/Off
Story Camera (
On
Off
IS Settings (
O
O
O
–
O
O
O
O
O
O
O
O
O
–
O
–
O
O
–
O
O
O
O
O
–
IS Mode
Dynamic IS
Off
Continuous
Shoot Only
1
2
O O
O O
O –
O O
O O
O
O
–
O
O
O O
O O
– O
O O
O O
Date Stamp
Off
Date
Date & Time
Set Story Cam. (
Mirror Image
Non-Mirrored
Include Stills/No Stills
Face ID Settings (
O
–
–
–
O
O
O O
O O
O
O
O
O
O
O
O
–
–
–
O
•
Names of people in shots taken using Face ID (
) may not be displayed in some modes or with some settings, but they will be recorded in the still images.
O O
–
–
–
–
–
–
–
–
O
O
–
O
I
K
P t N
E
O O O O – O – – – – – – – O O – –
O O O O O O O O O O O O O O O O O
O O O O O O O O O O O O O O O O O
– – – – – – – – – – – – – – – – –
O O O O O O O O O O O O O O O O O
O O O O – O O O O O O O O O O O O
O O O O O O O O O O O O O O O O O
O O O O – O O O O O O O O O O O
O O O O O O O O – O O O O O O O
–
O
O O O O – O O O O O O O O O O O O
O O O O O O O O O O O O O O O O O
O O O O – O O
O O O O – O O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
–
–
–
–
–
O
–
–
–
O
–
–
–
O
–
–
–
O
–
–
–
O
–
–
–
O
–
–
–
O
–
–
–
O
–
–
–
O
–
–
–
O
–
–
–
O
–
–
–
O
–
–
–
O
–
–
–
O
–
–
–
O
–
–
–
O
–
–
–
O
O Available or set automatically. – Not available.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
199
3 Set Up Tab Menu
Item
Mute
Volume
Hints & Tips
Date/Time
Time Zone
Lens Retract
Eco Mode
Power Saving
LCD Brightness
Start-up Image
Format
Ref. Page
Item
File Numbering
Create Folder
Units
Video System
Ctrl via HDMI
Touch Response
Wi-Fi Settings
Mobile Device Connect
Button
Certification Logo Display
Language
Reset All
Ref. Page
1 Playback Tab Menu
Item
Album Playback
List/Play Digest Movies
Slideshow
Erase
Protect
Rotate
Favorites
Photobook Set-up i-Contrast
Red-Eye Correction
Cropping
Ref. Page
Resize
My Colors
Item
Face ID Info
Transition Effect
Index Effect
Scroll Display
Group Images
Auto Rotate
Resume
Set Touch Actions
2 Print Tab Menu
Item
Select Images & Qty.
Select Range
Ref. Page
–
Item
Select All Images
Clear All Selections
Print Settings
Ref. Page
Ref. Page
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
200
Playback Mode FUNC. Menu
Item
Rotate
Protect
Erase
Group Playback
Ref. Page
Play Movie
Item
Play Linked Digest Movie
Smart Shuffle
Image Search
Slideshow
Ref. Page
Handling Precautions
•
The camera is a high-precision electronic device. Avoid dropping it or subjecting it to strong impact.
•
Never bring the camera near magnets, motors, or other devices that generate strong electromagnetic fields, which may cause malfunction or erase image data.
•
If water droplets or dirt adheres to the camera, screen, or Story Camera lens, wipe with a dry soft cloth, such as an eyeglass cloth. Do not rub hard or apply force.
•
Never use cleaners containing organic solvents to clean the camera, screen, or Story Camera lens.
•
Use a blower brush to remove dust from the lens. If cleaning is difficult, contact a Canon Customer Support Help Desk.
•
To prevent condensation from forming on the camera after sudden temperature changes (when the camera is transferred from cold to warm environments), put the camera in an airtight, resealable plastic bag and let it gradually adjust to the temperature before removing it from the bag.
•
If condensation does form on the camera, stop using it immediately.
Continuing to use the camera in this state may damage it. Remove the battery pack and memory card, and wait until the moisture has evaporated before resuming use.
•
Before long-term battery storage, use up the battery pack’s remaining charge, remove it from the camera, and store it in a plastic bag or similar container. Storing a partially charged battery pack over extended periods
(about a year) may shorten its life or affect performance.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
201
Specifications
Camera Effective
Pixels (Max.)
Lens Focal Length
LCD Monitor
File Format
Data Type
Interface
Power Source
Dimensions (Based on CIPA Guidelines)
Weight (Based on
CIPA Guidelines)
Approx. 12.1 million pixels
5x zoom: 5.2 (W) – 26.0 (T) mm
(35mm film equivalent: 24 (W) – 120 (T) mm)
3.0-type color TFT LCD
Effective Pixels: Approx. 922,000 dots
Design rule for Camera File system,
DPOF (version 1.1) compliant
Still Images: Exif 2.3 (JPEG)
Movies: MP4 (Video: MPEG-4 AVC/H.264;
Audio: MPEG-4 AAC-LC (stereo))
Hi-speed USB
HDMI output
Analog audio output (stereo)
Analog video output (NTSC/PAL)
Battery Pack NB-12L
AC Adapter Kit ACK-DC100
104.5 x 67.5 x 35.8 mm (4.11 x 2.66 x 1.41 in.)
Approx. 289 g (approx. 10.19 oz.; including the battery pack and memory card)
Approx. 252 g (approx. 8.89 oz.; camera body only)
Wi-Fi
Standards
Transmission
Methods
Communication
Modes
Supported Channels
Security
IEEE 802.11b/g/n*
* 2.4 GHz band only
OFDM modulation (IEEE 802.11g/n)
DSSS modulation (IEEE 802.11b)
Infrastructure mode* 1 , Ad hoc mode* 2
*1 Supports Wi-Fi Protected Setup
*2 Wi-Fi Certified IBSS
1 – 11 (PC2096/2098) or 1 – 13 (PC2051)
Model numbers indicated in parentheses (
WEP, WPA-PSK (AES/TKIP),
WPA2-PSK (AES/TKIP)
Digital Zoom Focal Length (35mm film equivalent)
Digital Zoom [On]
24 – 480 mm
(Represents the combined focal length of optical and digital zoom.)
Digital Tele-Converter 1.5x 36.0 – 720.0 mm
Digital Tele-Converter 2.0x 48.0 – 960.0 mm
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Story Camera
Lens Focal Length
35mm film equivalent: 25 mm
f/number (max. aperture)
f/2.8
202
Number of Shots/Recording Time, Playback Time
Number of Shots
Eco Mode On
Movie Recording Time* 1
Continuous
Shooting*
2
Playback Time
Approx. 330
Approx. 460
Approx. 1 hour, 10 minutes
Approx. 2 hours
Approx. 6 hours
*1 Time under default camera settings, when normal operations are performed, such as shooting, pausing, turning the camera on and off, and zooming.
*2 Time available when shooting the maximum movie length (until recording stops automatically) repeatedly.
•
The number of shots that can be taken is based on measurement guidelines of the
Camera & Imaging Products Association (CIPA).
•
Under some shooting conditions, the number of shots and recording time may be less than mentioned above.
•
Number of shots/time with a fully charged battery pack.
Number of 4:3 Shots per Memory Card
Recording Pixels
(Large)
12M/4000x3000
(Medium 1)
6M/2816x2112
(Medium 2)
3M/2048x1536
(Small)
0.3M/640x480
Compression
Ratio
Number of Shots per Memory Card
(Approx. shots)
8 GB 32 GB
1379
2192
5568
8850
2431
3721
4723
8469
27291
40937
9814
15020
19064
34184
110150
165225
•
The values in the table are based on Canon measurement conditions and may change depending on the subject, memory card and camera settings.
•
The values in the table are based on 4:3 aspect ratio. The number of shots available varies by aspect ratio (
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
203
Recording Time per Memory Card
Image Quality
Recording Time per Memory Card
8 GB 32 GB
43 min. 29 sec.*
1
2 hr. 55 min. 43 sec.*
2
2 hr. 3 min. 55 sec.
8 hr. 20 min. 32 sec.
5 hr. 14 min. 34 sec.
21 hr. 10 min. 38 sec.
*1 26 min. 22 sec. for iFrame movies (
).
*2 1 hr. 46 min. 33 sec. for iFrame movies (
•
The values in the table are based on Canon measurement conditions and may change depending on the subject, memory card and camera settings.
•
Recording will automatically stop when the clip file size reaches 4 GB, or when the recording time reaches approximately 29 minutes and 59 seconds when shooting in
[ ] or [ ], or approximately 1 hour when shooting in [ ].
•
Recording may stop even if the maximum clip length has not been reached on some memory cards. SD Speed Class 6 or higher memory cards are recommended.
.
Flash Range
Maximum wide angle ( j)
Maximum telephoto ( i)
50 cm – 7.0 m (1.6 – 23 ft.)
50 cm – 2.3 m (1.6 – 7.5 ft.)
Shooting Range
Shooting Mode Focusing Range
Other modes
– e* u*
Maximum Wide Angle
(j)
3 cm
(1.2 in.) – infinity
5 cm
(2.0 in.) – infinity
3 – 50 cm
(1.2 in. – 1.6 ft.)
3 m
(9.8 ft.) – infinity
* Not available in some shooting modes.
Maximum Telephoto
(i)
30 cm
(12 in.) – infinity
30 cm
(12 in.) – infinity
30 – 50 cm
(12 in. – 1.6 ft.)
3 m
(9.8 ft.) – infinity
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
204
Continuous Shooting Speed
Approx. 3 shots/sec.
•
Based on Canon testing standards, using a 8 GB UHS-I memory card. Note that the number of shots varies depending on subjects, the brand of memory card, and other factors.
[
Shutter Speed
] mode, automatically set range
1 – 1/2500 sec.
Aperture
f/number f/1.8 / f/8.0 (W) – f/5.7 / f/8.0 (T)
Battery Pack NB-12L
Type:
Nominal Voltage:
Nominal Capacity:
Charging Cycles:
Rechargeable lithium-ion battery
3.6 V DC
1910 mAh
Approx. 300 times
Operating Temperatures: 0 – 40 °C (32 – 104 °F)
Dimensions: 34.4 x 48.5 x 10.4 mm (1.35 x 1.91 x 0.41 in.)
Weight: Approx. 35 g (approx. 1.23 oz.)
Battery Charger CB-2LG/CB-2LGE
Rated Input:
Rated Output:
Charging Time:
100 – 240 V AC (50/60 Hz) 9.5 VA (100 V) – 13.5 VA (240 V),
0.09 A (100 V) – 0.06 A (240 V)
4.2 V DC, 0.7 A
Approx. 3 hr. 5 min. (when using NB-12L)
Charge Indicator: Charging: orange / Fully charged: green (two-indicator system)
Operating Temperatures: 5 – 40 °C (41 – 104 °F)
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
205
Index
Numbers
1-point (AF frame mode) ..................... 78
A
AC adapter kit ............................ 162, 167
Accessories ....................................... 162
AE lock ................................................ 73
AF frames ............................................ 78
AF lock................................................. 82
Aspect ratio.......................................... 47
AUTO mode (shooting mode) ........ 17, 31
AV cable ............................................ 166
B
Background defocus
(shooting mode)................................... 65
Battery charger .............................. 2, 162
Battery pack
Charging ........................................ 12
Eco mode .................................... 154
Level ............................................ 191
Power saving ................................. 23
Black and white images ....................... 76
Blink detection ..................................... 51
C
Camera
Reset all ...................................... 159
Camera access point mode ............... 135
CameraWindow (computer)....... 125, 169
CameraWindow (smartphone)........... 124
CANON iMAGE GATEWAY ........118, 120
Clock.................................................... 29
Color (white balance)........................... 75
Compression ratio (image quality) ....... 84
Connecting via an access point ......... 129
Connecting without an access point .. 135
Creative filters (shooting mode)........... 61
Creative Shot (shooting mode) ............ 62
Cropping .................................... 108, 174
Custom white balance ......................... 75
D
Date/time
Adding date stamps ...................... 39
Changing ....................................... 16
Date/time battery ........................... 16
Settings ......................................... 15
World clock .................................. 153
DC coupler......................................... 167
Defaults
→ Reset all
Digital tele-converter............................ 78
Digital zoom ......................................... 36
Display language ................................. 16
DPOF ................................................. 177
E
Eco mode .......................................... 154
Editing
Cropping ...................................... 108
i-Contrast ......................................110
My Colors .................................... 109
Red-eye correction ....................... 111
Resizing images .......................... 107
Editing or erasing connection
information ......................................... 149
Erasing .............................................. 101
Error messages ................................. 188
Exposure
AE lock .......................................... 73
Compensation ............................... 72
FE lock .......................................... 84
F
Face AiAF (AF frame mode) ................ 79
Face ID ................................................ 41
Face self-timer (shooting mode) .......... 68
Favorites ............................................ 104
FE lock................................................. 84
File numbering ................................... 157
Fireworks (shooting mode) .................. 60
Fish-eye effect (shooting mode) .......... 63
Flash
Deactivating flash .......................... 83
On ................................................. 83
Slow synchro ................................. 83
Focusing
AF frames ...................................... 78
AF lock .......................................... 82
AF-point zoom ............................... 50
Servo AF ....................................... 80
Touch AF ....................................... 81
Focusing range
Infinity ............................................ 78
Macro ............................................ 77
Focus lock ........................................... 79
FUNC. menu
Basic operations ............................ 25
Table .................................... 195, 201
G
GPS information display ...................... 89
Grid lines ............................................. 50
H
Handheld nightscene
(shooting mode)................................... 60
Household power............................... 167
I
i-Contrast ......................................74, 110
iFrame movies (movie mode) .............. 70
Image quality → Compression ratio
(image quality)
Images
Display period ............................... 52
Erasing ........................................ 101
Playback
→ Viewing
Protecting ...................................... 98
Image stabilization ............................... 85
Image Sync........................................ 145
Indicator ............................................... 28
Infinity (focusing range) ....................... 78
ISO speed............................................ 74
L
Lamp.............................................. 51, 52
Long shutter (shooting mode).............. 69
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
206
M
Macro (focusing range)........................ 77
Magnified display ................................. 95
Memory cards ........................................ 2
Recording time ............................ 204
Menu
Basic operations ............................ 26
Table ............................................ 194
Mercury lamp correction ...................... 49
Metering method.................................. 73
microSD/microSDHC/microSDXC memory cards
→ Memory cards
Miniature effect (shooting mode) ......... 63
Mobile device connection button ....... 144
Monochrome (shooting mode)............. 66
Movies
Editing ..........................................112
Image quality
(resolution/frame rate) ............. 47, 49
Recording time ............................ 204
Multi-area White Balance .................... 49
My Colors .................................... 76, 109
P
Package contents .................................. 2
Photobook set-up .............................. 180
PictBridge .................................. 163, 171
Playback
→ Viewing
Portrait (shooting mode) ...................... 60
Poster effect (shooting mode) ............. 61
Power ................................................ 162
→ AC adapter kit
→ Battery pack
→ Battery charger
Power saving ....................................... 23
Printing .............................................. 171
Program AE ......................................... 72
Protecting ............................................ 98
P (shooting mode) ............................... 72
R
Red-eye correction ....................... 48, 111
Remote shooting ............................... 148
Reset all............................................. 159
Resizing images ................................ 107
Resolution (image size) ....................... 47
Rotating ............................................. 103
S
Saving images to a computer .... 142, 170
Screen
Display language ........................... 16
Icons .................................... 191, 192
Menu
→ FUNC. menu, Menu
SD/SDHC/SDXC memory cards
→ Memory cards
Searching ............................................ 92
Self-timer ............................................. 37
2-second self-timer ........................ 38
Customizing the self-timer ............. 38
Face self-timer (shooting mode) ... 68
Wink self-timer (shooting mode) ... 67
Sending images ................................. 139
Sending images to a computer ...........119
Sending images to another camera... 120
Sending images to a printer............... 120
Sending images to a smartphone .......119
Sending images to Web services .......118
Sepia tone images ............................... 76
Servo AF .............................................. 80
Shooting
Shooting date/time
→ Date/time
Shooting information ................... 191
Slideshow ............................................ 96
Smart Shuffle ....................................... 97
Smart Shutter (shooting mode) ........... 66
Smile (shooting mode)......................... 66
Snow (shooting mode)......................... 60
Soft focus (shooting mode).................. 65
Software
Installation ................................... 125
Saving images to a
computer ............................. 142, 170
Sounds .............................................. 152
Stereo AV cable ......................... 163, 166
Strap ................................................ 2, 12
Super vivid (shooting mode) ................ 61
T
Terminal ............................. 164, 166, 172
Touch Actions .................................... 106
Touch AF.............................................. 81
Touch Shutter ...................................... 39
Toy camera effect (shooting mode) ..... 64
Traveling with the camera ................. 153
Troubleshooting ................................. 183
TV display .......................................... 163
V
Viewing ................................................ 19
Image search ................................ 92
Index display ................................. 91
Magnified display .......................... 95
Single-image display ..................... 19
Slideshow ...................................... 96
Smart Shuffle ................................ 97
TV display ................................... 163
W
White balance (color)........................... 75
Widescreen (resolution)....................... 47
Wi-Fi functions ....................................117
Wi-Fi menu ........................................ 128
Wink self-timer (shooting mode) .......... 67
World clock ........................................ 153
Wrist strap
→ Strap
Z
Zoom ....................................... 18, 31, 36
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
207
Wi-Fi (Wireless LAN) Precautions
•
The camera’s model number is PC2096/
PC2098/PC2051. To identify your model, check the label on the bottom of the camera for a number beginning with PC. The built-in
WLAN module model is written below.
•
-
Country/Region of Purchase
U.S.A., Canada
Other
WM224
WM223
WLAN Module Model
•
Doing any of the following may incur legal penalties:
Altering or modifying the product
-
Removing the certification labels from the product
•
According to foreign exchange and foreign trade law regulations, export permission (or service transaction permission) from the Japanese government is necessary to export strategic resources or services
(including this product) outside Japan.
•
Because this product includes American encryption software, it falls under U.S. Export Administration Regulations, and cannot be exported to or brought into a country under U.S. trade embargo.
•
Be sure to make notes of the wireless LAN settings you use.
The wireless LAN settings saved to this product may change or be erased due to incorrect operation of the product, the effects of radio waves or static electricity, or accident or malfunction. Be sure to make notes of wireless LAN settings as a precaution. Please note that Canon accepts no responsibility for direct or indirect damages or loss of earnings resulting from a degradation or disappearance of content.
•
When transferring this product to another person, disposing of it, or sending it for repair, be sure to note the wireless LAN settings and reset the product to its default settings (erase settings) if necessary.
•
Canon will not make compensation for damages resulting from loss or theft of the product.
Canon accepts no responsibility for damages or loss resulting from unauthorized access or use of target devices registered on this product due to loss or theft of the product.
•
Be sure to use the product as directed in this guide.
Be sure to use the wireless LAN function of this product within the guidelines noted in this guide. Canon accepts no responsibility for damages or loss if the function and product are used in ways other than as described in this guide.
•
Do not use the wireless LAN function of this product near medical equipment or other electronic equipment.
Use of the wireless LAN function near medical equipment or other electronic equipment may affect operation of those devices.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
208
Radio Wave Interference Precautions
•
This product may receive interference from other devices that emit radio waves. To avoid interference, be sure to use this product as far away as possible from such devices, or avoid using the devices at the same time as this product.
Security Precautions
Because Wi-Fi uses radio waves to transmit signals, security precautions more stringent than when using a LAN cable are required.
Keep the following points in mind when using Wi-Fi.
•
Only use networks you are authorized to use.
This product searches for Wi-Fi networks in the vicinity and displays the results on the screen. Networks you are not authorized to use (unknown networks) may also be displayed. However, attempting to connect to or using such networks could be regarded as unauthorized access. Be sure to use only networks you are authorized to use, and do not attempt to connect to other unknown networks.
If security settings have not been properly set, the following problems may occur.
•
Transmission monitoring
Third parties with malicious intent may monitor Wi-Fi transmissions and attempt to acquire the data you are sending.
•
Unauthorized network access
Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information.
Additionally, you could fall victim to other types of unauthorized access such as impersonation (where someone assumes an identity to gain access to unauthorized information) or springboard attacks (where someone gains unauthorized access to your network as a springboard to cover their tracks when infiltrating other systems).
To prevent these types of problems from occurring, be sure to thoroughly secure your Wi-Fi network.
Only use this camera’s Wi-Fi function with a proper understanding of
Wi-Fi security, and balance risk and convenience when adjusting security settings.
The camera can print to PictBridge-compatible printers via Wi-Fi. PictBridge technical standards make it easy to connect digital cameras, printers, and other devices directly. Additionally, a new standard called DPS over IP enables PictBridge connections in network environments, and the camera is also compatible with this standard.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
209
Battery Charger CB-2LG
If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet.
FCC/IC Notice
Model: PC2096 (including WLAN Module Model WM224, FCC ID: AZD224)
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
210
•
•
•
•
FCC Notice
(Digital Camera, Model PC2096 systems)
Trademarks and Licensing
•
Microsoft and Windows are trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries.
•
Macintosh and Mac OS are trademarks of Apple Inc., registered in the
U.S. and other countries.
•
App Store, iPhone, and iPad are trademarks of Apple Inc.
•
The SDXC logo is a trademark of SD-3C, LLC.
•
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.
•
The iFrame logo and the iFrame symbol are trademarks of Apple Inc.
•
Wi-Fi ® , Wi-Fi Alliance ® , WPA™, WPA2™ and Wi-Fi Protected Setup™ are trademarks or registered trademarks of the Wi-Fi Alliance.
•
All other trademarks are the property of their respective owners.
•
This device incorporates exFAT technology licensed from Microsoft.
•
This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding
MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the
AT&T patents to provide MPEG-4 compliant video. No license is granted or implied for any other use for MPEG-4 standard.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
211
Disclaimer
•
Unauthorized reproduction of this guide is prohibited.
•
All measurements based on Canon testing standards.
•
Information subject to change without notice, as are product specifications and appearance.
•
Illustrations and screenshots in this guide may differ slightly from the actual equipment.
•
The above items notwithstanding, Canon cannot be held liable for any loss arising from the use of this product.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
212
advertisement
Key Features
- Compact camera 12.1 MP CMOS Touchscreen Black
- Image sensor size: 1/1.7"
- Image stabilizer
- Optical zoom: 5x Digital zoom: 4x
- TTL
- ISO sensitivity (min): 80 ISO sensitivity (max): 6400 Fastest camera shutter speed: 1/2000 s Slowest camera shutter speed: 15 s ± 2EV (1/3EV step)
- Video recording 1920 x 1080 pixels Full HD
- Built-in microphone PictBridge HDMI
- Lithium-Ion (Li-Ion) 3.7 V