advertisement
HDMI CAT5 Extender Over Single cable Series
ITEM NO.: HE01ST, HE01SR, HE01SLR, HE01SER
The HDMI CAT5 Extender is using only one cost effective CAT5E/6 cable to extend your HDTV display up to 70 meters at 1080i and 40 meters at 1080p. It is equipped with HDMI connectors and also supports DVI equipment with allowing used with a HDMI to DVI adapter.
It provides an easy and flexible cabling solution for integrating home theater components.
HE01S HDMI CAT5 Extender – Single CAT5e cable
Extends HDMI signal over one CAT5e/6 cable.
HDMI 1.3 compliant, 3D capable.
Transmission range up to 70M at 1080i, 40M at 1080p resolution.
Built in auto equalization for easy plug and play.
Transmitter unit built in EDID backup function.
No external power requested at receiver unit under distance 30 meters.
HDCP compatible.
Optional HDMI CAT5e Receiver: HE01SLR, HE01SER.
Optional HDMI CAT5 Receiver
HE01SLR HDMI CAT5 Receiver – Chainable Function
Work with HE01ST as receiver for extra remote HDMI display equipment.
Built in Loop out, could be daisy chained for another HE01SLR to extended working range and multiple displays.
Built in auto equalization, retiming, pre-emphasized for optimum performance.
HDMI 1.3 compliant, 3D capable.
Transmission range up to 60M at 1080i, 30M at 1080p resolution.
HE01SER HDMI CAT5 Receiver – Passive type
Work with HE01ST as economic type receiver.
Passive, no external power required.
HDMI 1.3 compliant, 3D capable.
Transmission range up to 60M at 1080i/720p,40M at 1080p resolution.
No external power requested at HE01SER receiver unit.
FORESIGHT CCTV INC. | 5863 Leslie Street, Unit#713, North York, Ontario,Canada, M2H 1J8 | http://www.foresight-cctv.com | 1-888-GO2-CCTV
1
Installation view:
HE01S (HE01ST+HE01SR)
HE01SE (HE01ST+HE01SER)
HE01SL (HE01ST+HE01SLR)
Panel view & Function:
HE01ST
EDID Setup:
Use default EDID: move DIP switch 1 off ↑ move DIP switch 2 off ↑ Select the first default EDID: support 1080i / LPCM 2 Channel. move DIP switch 2 on ↓ Select the second default EDID: support 1080p / LPCM 5.1 Channel.
Use external EDID:
1. move DIP switch 1 on ↓ , HE01ST unplug the power.
2. HE01ST connect to HDMI connector of TV for auto backup.
3. Plug the power for HE01ST, TV EDID back up completed (Blue Power LED keep flash)
4. After complete TV EDID backup, HE01ST power must be reset (unplug and plug) to activate the new EDID.
Transmitter Unit LED Indication:
BLUE ON
Flash
Power on
TV EDID backup completed
RJ45 Connector LED:
GREEN ON Sending power or video to receiver unit
FORESIGHT CCTV INC. | 5863 Leslie Street, Unit#713, North York, Ontario,Canada, M2H 1J8 | http://www.foresight-cctv.com | 1-888-GO2-CCTV
2
YELLOW ON
Dip Switch function:
No data input or unsupported video format
1 ↑ Use the default EDID.
↓ Use the backup TV EDID.
2 ↑ Select the first default EDID: support 1080i / LPCM 2 Channel.
↓ Select the second default EDID: support 1080p / LPCM 5.1
Channel.
After complete Dip Switch setting, power must be reset ( unplug and plug) to activate the new EDID.
HE01SR
HE01SR Receiver Unit LED Indication:
BLUE ON Using external power adapter
GREEN ON Power and HDMI signal received from transmitter unit
YELLOW ON No data input or signal too weak
HE01SLR
HE01SLR Receiver Unit LED Indication:
BLUE ON Using external power adapter
GREEN ON Power and HDMI signal received from transmitter unit
YELLOW ON No data input or signal too weak
HE01SER
GREEN ON
YELLOW ON
HE01SER Receiver Unit LED Indication:
Sending power or video to receiver unit
No data input or unsupported video format
Cable:
Link cable using high quality CAT5e UTP or CAT6 UTP cable.
CAT6 cable is recommend based on distance over 30 meters.
Do not use STP cable which caused no picture.
Transmission Distance:
The transmission distance will be affected from different HDMI equipment and cable quality.
Lower resolution and good quality cable could extend longer distance up to 100 meters.
HE01ST to HE01SR
Resolution/Cable Distance(Meter)
1080p/CAT5e 40
1080p/CAT6
1080i,720p/CAT5e
45
70
FORESIGHT CCTV INC. | 5863 Leslie Street, Unit#713, North York, Ontario,Canada, M2H 1J8 | http://www.foresight-cctv.com | 1-888-GO2-CCTV
3
HE01ST to HE01SER
Resolution/Cable Distance(Meter)
1080p/CAT5e 40
HE01ST to HE01SLR
Resolution/Cable Distance(Meter)
1080p/CAT5e 30
1080p/CAT6
1080i,720p/CAT5e
45
60
1080p/CAT6
1080i,720p/CAT5e
35
60
RJ45 Define:
Video Link (use TIA/EIA-568-B)
1. Orange-white TMDS DATA2 +
2. Orange
3. Green-white
4. Blue
5. Blue-white
6. Green
7. Brown-white
8. Brown
TMDS DATA2 -
TMDS CLOCK + / HDMI 5V
TMDS DATA1 +
TMDS DATA1 -
TMDS CLOCK - / HDMI 0V
TMDS DATA0 +
TMDS DATA0 -
Caution:
1. The cabling must away from any equipment with electromagnetic wave, such as microwave ovens, mobile phones, radio equipment, power lines.
2. Our HDMI CAT5E Extender not networking product, please do not connect with any
Ethernet to avoid any damage.
Specification:
ITEM NO.
Video Bandwidth
Resolution
Link Cable Distance
Input TMDS Signal
Input DDC Signal
HDMI Connector
Link Connector
Power Supply
Power Consumption
Temperature
Dimensions mm
Weight g
ITEM NO.
Resolution
HE01ST HE01SR
2.25 Gbps (HDMI 1.3)
480i/p, 720p, 1080i/p @ 24/50/60Hz
CAT5e 60M @1080i, CAT5e 40M @1080p
1.2 volts peak to peak
5 Volts peak to peak
HDMI 19 pin type female connector
RJ-45 Shielded with 2 indication LEDS
DC5V 2Amp
1200mA (Max) 700mA (Max)
Operation: 0 to 55 ℃ , Storage: -20 TO 85 ℃ , Humidity: up to 95%
67 x 91 x 27
140
67 x 120 x 27
175
Distance
HDMI Connector
Link Connector
Loop Out Connector
Power Supply
Power Consumption
Temperature
Dimensions mm
Weight g
HE01SLR HE01SER
480i/p, 720p, 1080i/p @ 24/50/60Hz
Cat.5e 60M @1080i,
Cat.5e 30M @1080p
Cat.5e 60M @1080i,
Cat.5e 40M @1080p
HDMI Type A
RJ-45
RJ-45
DC5V 2Amp X
1150mA (Max) X
Operation: 0 to 55 ℃ , Storage: -20 TO 85 ℃ , Humidity: up to 95%
110 × 67 × 27
160
57.5 × 24 × 20.2
20
Rev. C
FORESIGHT CCTV INC. | 5863 Leslie Street, Unit#713, North York, Ontario,Canada, M2H 1J8 | http://www.foresight-cctv.com | 1-888-GO2-CCTV
4
advertisement
Related manuals
advertisement