D-Link Xtreme N DIR-825 Quick Installation Manual
D-Link SharePort DIR-825 is a high-performance wireless router designed to provide secure and reliable internet access for homes and small offices. With its dual-band technology, it can simultaneously operate on both 2.4GHz and 5GHz frequencies, reducing interference and ensuring optimal performance for bandwidth-intensive applications like streaming HD video or online gaming.
Reklamë
Reklamë
Quick Installation Guide
DIR-825
Xtreme N™ Dual Band Gigabit Router
DIR-825 Quick Installation Guide
BEFORE YOU BEGIN
Delivery Package
• Wireless router DIR-825
• Power adapter DC 12V/1.2A
• Ethernet cable (CAT 5E)
• “ Quick Installation Guide ” (brochure).
If any of the items are missing, please contact your reseller.
The “ User Manual ” and “ Quick Installation Guide ” documents in Russian and English are available on D-Link website (see ftp.dlink.ru/pub/Router/DIR-
825/Description/RevD/ ).
!
Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.
Default Settings
IP address of wireless router 192.168.0.1
Username (login) admin
Name of wireless network (SSID)
Password admin
2.4GHz
DIR-825
5GHz DIR-825-5G
2
DIR-825 Quick Installation Guide
System Requirements and Equipment
• A computer with any operating system that supports a web browser.
• A web browser to access the web-based interface of the router:
◦ Apple Safari 5 and later
◦ Google Chrome 5 and later
◦ Microsoft Internet Explorer 7 and later
◦ Mozilla Firefox 5 and later
◦ Opera 10 and later.
• A NIC (Ethernet or Wi-Fi adapter) to connect to the router.
• An 802.11a, b, g, or n Wi-Fi adapter to create a wireless network.
• A USB modem to connect to the Internet 1 .
!
Your USB modem should be equipped with an active identification card (SIM or R-UIM) of your operator.
Some operators require subscribers to activate their USB modems prior to using them. Please, refer to connection guidelines provided by your operator when concluding the agreement or placed on its website.
For LTE and CDMA USB modems, it is required to disable the PIN code check on the identification card prior to connecting the USB modem to the router.
1 Contact your operator to get information on the service coverage and fees.
3
DIR-825 Quick Installation Guide
Supported USB Modems
GSM modems
• D-Link DWM-152
• D-Link DWM-156
• Huawei E1550
• Huawei E160G
• Huawei E169G
• Huawei E171
• Huawei E220
• ZTE MF112
• ZTE MF192
• ZTE MF626
• ZTE MF627
• ZTE MF652
• ZTE MF668
• ZTE MF752
CDMA modems 2
• Airplus MCD-650
• Airplus MCD-800
• AnyDATA ADU-300A
• AnyDATA ADU-500A
• AnyDATA ADU-510A
• ZTE AC5710
• ZTE AC5730
LTE modems
• Huawei E392
• Yota LU150
!
The manufacturer does not guarantee proper operation of the router with every modification of the firmware of USB modems.
2 Performance of CDMA USB modems is not tested for the current firmware version.
4
DIR-825 Quick Installation Guide
CONNECTING TO PC
PC with Ethernet Adapter
1. Make sure that your PC is powered off.
2. Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC.
3. To connect via an LTE, 3G GSM or CDMA network: connect your USB modem to the USB port 3 located on the left side panel of the router.
!
If you need to connect or change a USB modem to another one when the router is powered on, power off the router, connect the modem to the USB port, and power on the router.
4. Connect the power cord to the power connector port on the back panel of the router, then plug the power adapter into an electrical outlet or power strip.
5. Turn on the router by pressing the ON/OFF button on its back panel.
6. Turn on your PC and wait until your operating system is completely loaded.
Now you should configure your PC to obtain an IP address automatically (as
DHCP client).
3 It is recommended to use a USB extension cable to connect a USB modem to the router.
5
DIR-825 Quick Installation Guide
Obtaining IP Address Automatically in OS Windows XP
1. Click the Start button and proceed to the Control Panel > Network and Internet Connections > Network Connections window.
2. In the Network Connections window, right-click the relevant Local
Area Connection icon and select the Properties line in the menu displayed.
3. In the Local Area Connection Properties window, on the General tab, select the Internet Protocol (TCP/IP) line. Click the Properties button.
6
DIR-825 Quick Installation Guide
4. Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons. Click the OK button.
5. Click the ОК button in the connection properties window.
Now your computer is configured to obtain an IP address automatically.
7
DIR-825 Quick Installation Guide
Obtaining IP Address Automatically in OS Windows 7
1. Click the Start button and proceed to the Control Panel window.
2. Select the Network and Sharing Center section. (If the Control Panel has the category view (the Category value is selected from the View by drop-down list in the top right corner of the window), choose the View network status and tasks line under the Network and Internet section.)
3. In the menu located on the left part of the window, select the Change adapter settings line.
4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed.
5. In the Local Area Connection Properties window, on the
Networking tab, select the Internet Protocol Version 4 (TCP/IPv4) line. Click the Properties button.
8
DIR-825 Quick Installation Guide
6. Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons. Click the OK button.
7. Click the OK button in the connection properties window.
Now your computer is configured to obtain an IP address automatically.
9
DIR-825 Quick Installation Guide
PC with Wi-Fi Adapter
1. To connect via an LTE, 3G GSM or CDMA network: connect your USB modem to the USB port 4 located on the left side panel of the router.
!
If you need to connect or change a USB modem to another one when the router is powered on, power off the router, connect the modem to the USB port, and power on the router.
2. Connect the power cord to the power connector port on the back panel of the router, then plug the power adapter into an electrical outlet or power strip.
3. Turn on the router by pressing the ON/OFF button on its back panel.
4. Turn on your PC and wait until your operating system is completely loaded.
5. Turn on your Wi-Fi adapter. As a rule, modern notebooks with built-in wireless NICs are equipped with a button or switch that turns on/off the wireless adapter (refer to your PC documents). If your PC is equipped with a pluggable wireless NIC, install the software provided with your
Wi-Fi adapter.
Now you should configure your Wi-Fi adapter.
4 It is recommended to use a USB extension cable to connect a USB modem to the router.
10
DIR-825 Quick Installation Guide
Configuring Wi-Fi Adapter in OS Windows XP
1. Click the Start button and proceed to the Control Panel > Network and Internet Connections > Network Connections window.
2. Select the icon of the wireless network connection and make sure that your Wi-Fi adapter is on.
3. Search for available wireless networks.
4. In the opened Wireless Network Connection window, select the wireless network DIR-825 (for operating in the 2.4GHz band) or DIR-
825-5G (for operating in the 5GHz band) and click the Connect button.
After that the Wireless Network Connection Status window appears.
!
If you perform initial configuration of the router via Wi-Fi connection, note that immediately after changing the wireless default settings of the router you will need to reconfigure the wireless connection using the newly specified settings.
11
DIR-825 Quick Installation Guide
Configuring Wi-Fi Adapter in OS Windows 7
1. Click the Start button and proceed to the Control Panel window.
2. Select the Network and Sharing Center section. (If the Control Panel has the category view (the Category value is selected from the View by drop-down list in the top right corner of the window), choose the View network status and tasks line under the Network and Internet section.)
3. In the menu located on the left part of the window, select the Change adapter settings line.
4. In the opened window, select the icon of the wireless network connection and make sure that your Wi-Fi adapter is on.
5. To open the list of available wireless networks, select the icon of the wireless network connection and click the Connect To button or leftclick the network icon in the notification area located on the right side of the taskbar.
12
DIR-825 Quick Installation Guide
6. In the opened window, in the list of available wireless networks, wireless network DIR-825 (for operating in the 2.4GHz band) or DIR-825-5G
(for operating in the 5GHz band) and click the Connect button.
!
7. Wait for about 20-30 seconds. After the connection is established, the network icon will be displayed as the signal level scale.
If you perform initial configuration of the router via Wi-Fi connection, note that immediately after changing the wireless default settings of the router you will need to reconfigure the wireless connection using the newly specified settings.
13
DIR-825 Quick Installation Guide
CONFIGURING ROUTER
Connecting to Web-based Interface
1. Start a web browser.
2. In the address bar of the web browser, enter the IP address of the router
(by default, the following IP address is specified: 192.168.0.1
). Press the Enter key.
3. On the opened page, enter the username and password for the administrator account in the Login and Password fields correspondingly (by default, the following username and password are specified: admin , admin ). Then click the Enter link.
!
If the error “ The page cannot be displayed ” (or “ Unable to display the page ”/“ ”) occurs upon connecting to the web-based interface of the router, make sure that you have properly connected the router to your computer.
14
DIR-825 Quick Installation Guide
Right after the first access to the web-based interface you are forwarded to the page for changing the administrator password specified by default.
Enter a new password in the Password and Confirmation fields (you may use digits, Latin letters (uppercase and/or lowercase), and characters available on the keyboard), then click the Save link.
!
Remember or write down the new password for the administrator account. In case of losing the new password, you can access the settings of the router only after restoring the factory default settings via the hardware RESET button. This procedure wipes out all settings that you have configured for your router.
15
DIR-825 Quick Installation Guide
After successful registration the router's quick settings page opens.
The web-based interface of the router is multilingual. Select a needed language from the menu displayed when the mouse pointer is over the Language caption. You can change the language of the web-based interface in any menu item.
After selecting the language, the notification on unsaved changes will be displayed. Click the Save icon ( ) to save the current language of the web-based interface as the default language.
16
DIR-825 Quick Installation Guide
The quick settings page displays general information on the router and its software (the version and the date of the firmware, the IP address of the device, the name of the 2.4GHz WLAN, etc.).
On the quick settings page, you can quickly get to some pages of the webbased interface or run a needed Wizard (use the links on the left side of the page).
From the quick settings page you can switch to the advanced settings section.
To do this, click the Advanced settings link in the bottom right corner of the page.
Also you can find a specific page via search. To do this, enter the name of the page, wholly or partly, in the search bar in the top part of the web-based interface page, and then select a needed link in the search results.
17
DIR-825 Quick Installation Guide
Configuring Connection to the Internet
!
You should configure your WAN connection in accordance with data provided by your Internet service provider (ISP). Make sure that you have obtained all necessary information prior to configuring your connection. Otherwise contact your ISP.
LTE WAN Connection
If the PIN code check is enabled for the SIM card inserted into your LTE USB modem, it is required to disable the PIN code check on the identification card prior to connecting the USB modem to the router.
1. Go to the Net / WAN page and click the Add button.
2. From the Connection Type drop-down list, select the LTE value.
3. Make sure that the USB value is selected from the Interface drop-down list.
4. Specify a name for your connection (any name for easier identification) in the Name field.
18
DIR-825 Quick Installation Guide
5. If your operator has provided the address of the DNS server, in the IP section, deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field.
6. Click the Save button.
7. On the Net / WAN page, select the choice of the Default gateway radio button corresponding to the new LTE WAN connection.
19
DIR-825 Quick Installation Guide
3G WAN Connection
If the PIN code check is enabled for the SIM card inserted into your USB modem, then prior to creating a 3G WAN connection, proceed to the USB modem menu and enter the PIN code on the page displayed 5 .
1. Go to the Net / WAN page and click the Add button.
2.
In the General settings section, from the Provider drop-down list, select your country and operator to automatically specify all settings required to connect to the Internet. To specify all settings independently, leave the Manually value.
3.
From the Connection Type drop-down list, select the 3G value.
4. Make sure that the USB value is selected from the Interface drop-down list.
5.
Specify a name for your connection (any name for easier identification) in the Name field.
5 For GSM USB modems only. For CDMA USB modems, it is required to disable the
PIN code check on the identification card prior to connecting the USB modem to the router.
20
DIR-825 Quick Installation Guide
6.
If you need to specify other settings, in the PPP section, enter authorization data provided by your operator (the username (login) in the
Username field and the password in the Password and Password confirmation fields), or select the Without authorization checkbox if authorization is not required. In the APN field, enter the access point name (for GSM USB modems only), and in the Dial number field, enter the number dialed to connect to the authorization server of the operator.
7. Click the Save button.
8. On the Net / WAN page, select the choice of the Default gateway radio button corresponding to the new 3G WAN connection.
21
DIR-825 Quick Installation Guide
Wired WAN Connection
1. Go to the Net / WAN page, select the WAN connection and click the
Delete button.
2. Click the Add button.
3.
In the General settings section, in the Provider drop-down list, leave the Manually value.
4.
From the Connection Type drop-down list, select the needed value.
5.
From the Interface drop-down list, select the Internet value.
6.
Specify a name for your connection (any name for easier identification) in the Name field.
22
DIR-825 Quick Installation Guide
7. If your ISP uses MAC address binding, in the Ethernet section, in the
MAC field, enter the MAC address registered by your ISP upon concluding the agreement. To set the MAC address of the network interface card (of the computer that is being used to configure the router at the moment) as the MAC address of the WAN interface, click the
Clone MAC Address button ( ). To set the address of a device connected to the router's LAN at the moment, select the relevant value from the drop-down list (the field will be filled in automatically).
8.
For connection of PPPoE type : in the PPP section, enter authorization data provided by your ISP (the username (login) in the Username field and the password in the Password and Password confirmation fields), or select the Without authorization checkbox if authorization is not required.
23
DIR-825 Quick Installation Guide
9.
For connection of Static IP type : in the IP section, fill in the IP
Address , Netmask , Gateway IP address , and Primary DNS server fields.
10.
For connection of Dynamic IP type : if your ISP has provided the address of the DNS server, in the IP section, deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field.
24
DIR-825 Quick Installation Guide
11.
For connection of PPTP + Static IP or L2TP + Static IP type : in the IP section, fill in the IP Address , Netmask , Gateway IP address , and
Primary DNS server fields. Then in the VPN section, enter authorization data provided by your ISP (the username (login) in the
Username field and the password in the Password and Password confirmation fields), or select the Without authorization checkbox if authorization is not required. In the VPN s erver address field, enter the IP or URL address of the PPTP or L2TP authentication server. If your
ISP applies encryption, select a needed value from the Encryption dropdown list.
25
DIR-825 Quick Installation Guide
12.
For connection of PPTP + Dynamic IP or L2TP + Dynamic IP type : if your ISP has provided the address of the DNS server, in the IP section, deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field. Then in the VPN section, enter authorization data provided by your ISP (the username
(login) in the Username field and the password in the Password and
Password confirmation fields), or select the Without authorization checkbox if authorization is not required. In the VPN server address field, enter the IP or URL address of the PPTP or L2TP authentication server. If your ISP applies encryption, select a needed value from the
Encryption drop-down list.
13. Click the Save button.
26
DIR-825 Quick Installation Guide
Example of Connection via VLANs
If your ISP provides:
• access to the Internet via the VLAN with the tag (VLAN ID) 2 , the
PPPoE connection type, the login user , and the password user_password ,
• access to IPTV service via the VLAN with the tag (VLAN ID) 10 ,
• access to IP telephony via the VLAN with the tag (VLAN ID) 20 , and your set-top box is connected to the LAN port 3, your VoIP phone is connected to the LAN port 4 of the router, then follow the next steps to configure the router.
1. Go to the Net / WAN page, select the WAN connection and click the
Delete button on the opened page.
2. Go to the Advanced / VLAN page.
3. Select the lan group.
4. Select the line port3 in the table at the bottom of the page and click the
Delete port button.
5.
Select the line port4 and click the Delete port button.
6. Click the Save changes button.
7. Select the wan group.
8. In the Name field, enter a name for the group ( INTERNET ).
9. From the Type drop-down list, select the NAT value.
10. From the Port drop-down list, select the value internet (corresponds to the INTERNET port of the router).
11. From the Tag drop-down list, select the tagged value.
12. In the VLAN ID field, enter 2 .
13. Click the Save changes button.
You have created the group of ports for connection to the Internet.
27
DIR-825 Quick Installation Guide
14. Click the Add button.
15. In the Name field, enter a name for the new group ( IPTV ).
16. From the Type drop-down list, select the Transparent value.
17. From the Port drop-down list, select the value port3 .
18. From the Tag drop-down list, select the untagged value.
19.
From the Port drop-down list, select the value internet .
20. From the Tag drop-down list, select the tagged value.
21. In the VLAN ID field, enter 10 .
22. Click the Save changes button.
You have created the group of ports for IPTV service.
23. Click the Add button.
24. In the Name field, enter a name for the new group ( VOIP ).
25. From the Type drop-down list, select the Transparent value.
26. From the Port drop-down list, select the value port4 .
27. From the Tag drop-down list, select the untagged value.
28.
From the Port drop-down list, select the value internet .
29. From the Tag drop-down list, select the tagged value.
30. In the VLAN ID field, enter 20 .
31. Click the Save changes button.
You have created the group of ports for access to IP telephony.
28
DIR-825 Quick Installation Guide
32. Click the Save&Reboot line in the top-page menu displayed when the mouse pointer is over the System caption.
33. Log into the web-based interface and go to the Net / WAN page.
34. Click the Add button.
35. On the opened page, select the PPPoE value from the Connection
Type drop-down list.
36.
From the Interface drop-down list, select the value Internet.2
.
37. In the Username field, enter user .
38. Deselect the Without authorization checkbox.
39. In the Password and Password confirmation fields, enter user_password .
40. Click the Save button.
29
DIR-825 Quick Installation Guide
Configuring Local Area Network
1.
Go to the Net / LAN page. If needed, change the IP address of the router's LAN interface and the mask of the local subnet in the IP
Address and Netmask fields. Then click the Save button.
2.
By default, the DHCP server of the router is enabled. In the DHCP server section, you can change the parameters of the DHCP server. If you want to manually assign IP addresses to devices of your LAN, disable the DHCP server (select the Disable value from the Mode drop-down list).
3.
After specifying the DHCP server settings, click the Save button.
30
DIR-825 Quick Installation Guide
Configuring Wireless Network
By default, the wireless network of the router is open (it requires no password to access it). To avoid unauthorized access to your wireless local area network, change the default settings of the router.
Example of Wireless Settings
1. Go to the Wi-Fi / Security settings page.
2. Go to the tab corresponding to the used range of the wireless network
( 2.4 GHz or 5 GHz ).
3. Select the WPA2-PSK value from the Network Authentication dropdown list.
!
4. Enter a key (a password that will be used to access your wireless network) in the Encryption Key PSK field. Use digits and Latin characters.
5. Select the AES value from the WPA Encryption drop-down list.
6. Click the Change button.
7. If needed, specify your own security settings for the other range of the wireless network.
If you perform initial configuration of the router via Wi-Fi connection, note that immediately after changing the wireless default settings you will need to reconfigure the wireless connection using the newly specified settings.
31
DIR-825 Quick Installation Guide
Saving Settings to Non-volatile Memory
In order to avoid losing the new settings upon hardware reboot (accidental or intentional power-off of the device), it is recommended to save the settings to the non-volatile memory of the router.
Click the Save&Reboot line in the top-page menu displayed when the mouse pointer is over the System caption.
Wait until the router is rebooted. Now you can use it to access the Internet or access the web-based interface of the router to configure additional parameters. For detailed description of every page of the web-based interface, see the “ User Manual ” document ( ftp.dlink.ru/pub/Router/DIR-
825/Description/RevD/ ).
32
DIR-825 Quick Installation Guide
TECHNICAL SUPPORT
You can find software updates and user documentation on our website.
D-Link provides its customers with free support within the product's warranty period.
Customers can contact the technical support group by phone or by email/Internet.
FOR TELEPHONE NUMBERS AND ADDRESSES OF D-LINK
OFFICES WORLDWIDE VISIT http://www.dlink.com/corporate/worldwideoffices/
33
Shkarko
Lidhja publike u përditësua
Lidhja publike për bisedën tuaj është përditësuar. You may view and manage your chat links after registration here.
Lidhja publike e dokumentit
Reklamë