ATMOS/AURA AG
TM
SERIES
ATMOS AG™ 65 ATMOS AG™ 50 AURA AG™ 65 AURA AG™ 50
The fourth generation of Osprey's Atmos and Aura ventilated backpack series features the Anti-Gravity
TM
Suspension. This 3D contoured suspension allows unrestricted movement while wearing the pack. Combined with custom fit capability and a full feature set, the Atmos/Aura AG
TM
Series sets a new standard in ventilated backpacking.
OWNER'S MANUAL
ospreypacks.com
OVERVIEW
1
2
3
8
4
5
6
9
7
SHARED FEATURES
1 Top load access to main compartment
2 Removable floating top lid
3 Upper side compression straps
4 Lower side compression straps
5 Dual stretch mesh side pockets
6 Dual zippered hipbelt pockets
7 Dual ice tool loops with bungee tie-offs
8 Large stretch mesh front pocket
9 Lower zippered sleeping bag compartment
10 Dual zippered top lid pockets
11 Internal reservoir sleeve
12 Stow-on-the-Go TM trekking pole attachment
+ Internal top compression strap
+ Intergrated FlapJacket
TM
for weather protected lidless use
FABRIC
MAIN 100D x 630D Nylon Dobby
ACCENT 210D High Tenacity Nylon
BOTTOM 420HD Nylon Packcloth
ATMOS / AURA SERIES
10
11
12
2
OVERVIEW
ATMOS AG™ 65
SPECS S M L
Cubic Inches 3783 3967 4150
Liters 62 65 68
Lbs/Ounces 4/4 4/6 4/8
Kilograms 1.92 1.98 2.04
Inches 33h x 15w x 15d
Centimeters 84h x 38w x 39d
LOAD RANGE 30 - 50lb
UNIQUE FEATURES
1
ATMOS AG™ 50
SPECS S M L
Cubic Inches 2868 3051 3234
Liters 47 50 53
Lbs/Ounces 3/15 4/0 4/1
Kilograms 1.79 1.82 1.85
Inches 31h x 14w x 16d
Centimeters 80h x 35w x 40d
LOAD RANGE 25 - 40lb
AURA AG™ 65
SPECS
Cubic Inches
WXS WS WM
3661 3783 3967
Liters 60 62 65
Lbs/Ounces 4/0 4/2 4/4
Kilograms 1.81 1.87 1.93
Inches 31h x 15w x 15d
Centimeters 79h x 38w x 39d
LOAD RANGE 30 - 50lb
UNIQUE FEATURES
1 Dual zippered front panel pockets
2 Removable sleeping pad straps
1
2
AURA AG™ 50
SPECS
Cubic Inches
WXS WS WM
2746 2868 3051
Liters 45 47 50
Lbs/Ounces 3/11 3/12 3/13
Kilograms 1.67 1.70 1.73
LOAD RANGE 25 - 40lb
2
ATMOS / AURA SERIES 3
OVERVIEW
SUSPENSION
1 ANTI-GRAVITY
TM
SUSPENSION
+ LightWire
TM
tensioned full peripheral frame comfortably transfers pack load
2 ANTI-GRAVITY
TM
BACKPANEL
+ Top-to-bottom suspended mesh wraps shoulders, back and hips for a fully integrated backpanel fit
3 ANTI-GRAVITY
TM
HARNESS
+ Adjustable suspended harness with structural load lifter bar for load transfer and comfort
+ Adjustable sternum strap
+ Die cut foam lower and mesh ExoForm
TM wrap upper harness provide breathability and comfort
+ Gender specific
4 ANTI-GRAVITY TM HIPBELT
+ Suspended mesh hip wrap for load transfer and comfort
+ Adjustable Fit-on-the-Fly
TM
hipbelt
+ Gender specific
3
LOAD LIFTERS
3
HARNESS
3
STERNUM STRAP
4
HIPBELT
OSPREY ANTI-GRAVITY
TM
(AG™)
A continuous panel of lightweight mesh extends from the top of the backpanel to the hipbelt. The seamless structure contours automatically to the body, providing outstanding fit and unrestricted movement when wearing the pack.
MODIFIED ERGOPULL
TM
HIPBELT
65L / 50L
Osprey's ErgoPull
TM design creates extra leverage when cinching down the hipbelt.
A Loosen the hipbelt webbing so the hipbelt is large enough to be buckled around the waist.
B Grab the loose ends of the webbing on both sides and pull in and across the body evenly with both hands at the same time.
ATMOS / AURA SERIES
FRAME
1
BACKPANEL
2
4
SIZING / FIT
ATMOS AG™ - MEN'S SIZING
S 16-19" / 40-48 cm
M 18-21" / 46-53 cm
L 20-23" / 51-58 cm
AURA AG™ - WOMEN'S SIZING
XS 14-17" / 35-43 cm
S 16-19" / 40-48 cm
M 18-21" / 46-53 cm
HARNESS SIZING
A Completely loosen the pack's hipbelt straps, harness straps and load lifters.
B Load the pack with 10-20lbs/4-9kg of gear.
C Put on the pack ensuring the hipbelt is centered and resting over the user's hipbones. The hipbelt padding should sit half above and half below the hipbone.
Buckle the hipbelt and tighten the hipbelt straps.
WOMEN'S SPECIFIC FIT
+ The unique suspended mesh located on the shoulders, backpanel, lumbar and hipbelt contour to a wide variety of body shapes and sizes to create a custom fit to your body.
+ The pack shape is narrower and deeper allowing greater freedom of movement and increases stabilization by lowering the position of the load to a women's center of gravity.
+ The shoulder harness is designed with different curves to create an anatomical fit for a woman's neck, shoulders and chest.
+ Women's hips are conically shaped with a larger difference between the waist and hip measurements. The hipbelts are shaped and angled to accommodate this difference which allows a more comfortable load transfer and support.
D Tighten the shoulder harness straps by pulling them down and back. Adjust and buckle the sternum strap 2"/5cm below the collar bone. Tighten the load lifts to transfer the weight off of the shoulders.
E Find the harness yoke or where the harness straps come together near the users neck. The yoke should be 2"/5cm below the C7 vertebrae. The C7 vertebrae can be located by tilting the head down and finding the bone that protrudes at the base of the neck.
HARNESS FIT
The harness straps should wrap fully around your shoulders with no gaps between the pack and back. The padded part of the harness straps should end 1"/2.5cm- 2"/5cm below the armpits and the sternum strap adjusted to approximately 2"/5cm below the collarbone.
C7 VERTEBRAE ILLIAC CREST
F Make note of how far the yoke is from the C7 vertebrae. Based on this measurement the torso can be adjusted to the desired 2"/5cm.
ATMOS / AURA SERIES 5
SIZING / FIT
ADJUSTING HARNESS
65L / 50L
A Completely loosen the pack's load lifters and harness straps.
B Locate the harness adjustment cams on the left and right side behind the fabric wing where the yoke wraps around the edges of the backpanel.
C Push both cams down at the same time with your thumbs from the top of the harness attachment point to open and release the cams. While pushing down on the cam with your thumbs use your index and middle fingers to grab the lower portion of the fabric wing in front of the cams.
D With the cams released simultaneously slide both sides of the harness up or down to your desired location based on your torso fit needs and release the cams.
E Ensure the cams are lined up at the same height by comparing each side’s position using the line markings printed on the backpanel behind the suspended mesh. If they are uneven, release and adjust one side’s cam to match the other.
F Follow "Torso Fit" instructions to determine if the torso fit is correct.
FIT-ON-THE-FLY™ HIPBELT
65L / 50L
The-Fit-on-the-Fly™ hipbelt pad extends up to 5"/15cm to accommodate diff erent hip sizes providing a custom fi t. To adjust the hipbelt:
A Locate the adjustment icon on the hipbelt and slide a hand between the fi xed hipbelt and the adjustable pad to separate the hook and loop closure.
B Slide the hipbelt insert pad into position so that it wraps around your hipbones.
C Press fi rmly to reengage the hook and loop closure.
D Extend the pads the same distance on both hipbelt wings so the pack weight is distributed evenly.
ATMOS / AURA SERIES 6
FEATURE DETAILS
2
1
1 REMOVABLE FLOATING TOP LID
65L / 50L
The fl oating top lid can extend to accept oversized loads or can be removed from the pack body for weight saving lidless use.
A Release the top lid retention strap buckles on the front side of the pack.
B Unthread the webbing through the duckbill buckles located on the back side of the top lid.
C Reverse to re-attach.
2 FLAPJACKET TM
65L / 50L
Osprey's FlapJacket
TM
provides compression and protection from the elements for the main pack compartment when the top lid is removed.
A Remove the top lid.
B Pull the FlapJacket
TM
out from the pack's main compartment covering the top of the pack.
C Using the pack's front retention straps cinch the FlapJacket TM into place.
COMPRESSION STRAPS
65L / 50L
Dual upper side compression straps stabilize loads while lower, cross functional compression straps also serve as external gear carry straps. To adjust, slide the nylon strap through the slider buckle and cinch it to compress/carry.
INTERNAL COMPRESSION STRAP
65L / 50L
Once your pack is loaded clip and tighten the red internal compression strap to stabilize the load.
SLEEPING BAG COMPARTMENT
65L / 50L
A lower zippered sleeping bag compartment with a drop down divider provides easy access to internal contents and allows you to use your pack with one compartment or two. To drop down the internal divider, thread the nylon connection straps through the sewn-in slider buckles.
ATMOS / AURA SERIES 7
FEATURE DETAILS
INTERNAL RESERVOIR SLEEVE
65L / 50L
An internal reservoir sleeve is located in the main body of the pack allowing easy loading/unloading of a hydration reservoir. Placing your reservoir inside the sleeve helps provide proper weight distribution when carrying your pack.
TOOL ATTACHMENT
65L / 50L
The dual ice tool loops and clove hitch style bungee tie-off s provide secure tool attachment and transport.
A Slide the tool shaft through the top of the ice tool loop and fl ip the shaft up towards the top of the pack.
B Loosen the bungee cord lock and route the tool handle through the bungee.
Tighten the cord lock nesting it into the Y-Clip to secure the tool into place.
C Reverse to remove.
STOW-ON-THE-GO™ TREKKING POLE ATTACHMENT
65L / 50L
Osprey's Stow-on the-Go™ trekking pole attachment is designed to quickly atttach and carry trekking poles while wearing a pack.
A Adjust the trekking poles to their minimum length.
B Locate the elasticized loop on the lower left side of pack. While pulling the loop out from the pack insert the basket end of the trekking poles into the loop.
C On the left harness strap locate the trekking pole icon. Pull up on the cord to open, place pole handles in the loop and tighten with the cord lock to secure.
D Reverse these steps to remove the trekking poles.
REMOVABLE SLEEPING PAD STRAPS
65L
Sleeping pad straps allow for quick, secure external gear attachment. They can be fully removed to save weight.
ATMOS / AURA SERIES 8
PACK / RESERVOIR MAINTENANCE
Your Osprey pack is an extremely durable product and is built for years of use.
However, some basic pack maintenance will help ensure your pack lasts a lifetime.
OSPREY PACKS
STANDARD MAINTENANCE
+ After each trip be sure to clean out your pack thoroughly.
+ Clean the zippers regularly using mild soap, warm water and soft brush. This will help keep them in proper working condition.
+ If your pack is wet, hang it to dry out of direct sunlight.
+ Loosen all the straps.
+ Wash your pack if dirt, sweat, salt and stains have worked their way into fabrics, webbing or mesh.
(Do not immerse travel packs in water with our High Road™ Wheeled Chassis.)
WASHING YOUR PACK
A Empty the pack including any food, dirt or spilled contents.
B If your pack has a removable harness and hipbelt remove them from the pack body.
C Do NOT wash your pack in a washing machine. Clean your pack and components in a bathtub or large sink using a mild detergent and warm water.
D Agitate the pack gently. Scrub the inside and outside of all compartments including the pockets with a soft brush.
E Clean the zippers using a mild soap, warm water and a soft brush. Flush water and soap through the buckles. By keeping dirt and debris out of the zippers and buckles it will help keep them in proper working condition.
F Drain the dirty water from the bathtub or sink and refi ll with cool clean nonsoapy water. Rinse the pack thoroughly. Repeat this step as neccessary.
G Hang your pack to dry outside or in a well-ventilated area, out of direct sunlight.
WHEELED TRAVEL LUGGAGE
(Do not immerse travel packs in water with our High Road™ Wheeled Chassis.)
A After each trip empty the pack including any food, dirt or spilled contents.
B Clean the zippers regularly using mild soap, warm water and soft brush. This will help keep them in proper working condition.
C Wipe the exterior of the chassis with a damp cloth or sponge.
D Clean the pack fabric by scrubbing stains and dirt with warm water, mild detergent and a soft brush or sponge.
E Use a wet towel with clean non-soapy water to wipe away any soap residue on the pack.
F Hang your pack to dry outside or in a well ventilated area, out of direct sunlight.
RECOMMENDED CLEANING PRODUCTS
Osprey recommends Nikwax® products for pack care. Be sure to read label directions carefully before applying any product to your pack.
Tech Wash® - Use this with warm water for washing and cleaning your packs or luggage.
Tent & Gear Solar Proof® - Use this spray-on product to protect your packs from
UV exposure and to improve water repellency.
OSPREY RESERVOIRS
RESERVOIR STANDARD MAINTENANCE
+ Our reservoir’s anti-microbial formula prevents most mold and bacteria growth.
+ Rinse out your reservoir after each use it should keep your reservoir fresh, especially when using sugary drink mixes.
+ Periodically use Osprey's Hydraulics™ Cleaning Tablets to clean your reservoir.
+ Iodine or other purifying tablets used in your reservoir will not eff ect the quality of your reservoir. However these tablets may stain the reservoir over time.
+ Freezing your reservoir will not eff ect the quality of the reservoir. However if the reservoir is fi lled with water be aware that water expands when it freezes and can damage your reservoir if it is overfi lled.
+ Do NOT pour boiling water into the reservoir. This can damage the reservoir and will void your warranty.
+ Watch “Cleaning an Osprey Hydraulics™ Reservoir” video on Osprey Packs
YouTube® page.
CLEANING YOUR RESERVOIR (WITH OSPREY HYDRAULICS™ CLEANING TABLETS)
A Fill reservoir with warm water, do not use bleach or boiling water.
B Add one cleaning tablet to reservoir and close the cap.
C Let tablet dissolve for 5 minutes with the reservoir laying on its back.
D Shake the reservoir for 30 seconds to mix and spread the solution.
E Pinch the bite valve and squeeze the reservoir to remove air and fi ll the reservoir hose and bite valve with solution.
F Let the reservoir sit for 15 minutes and then pour out solution.
G Rinse the reservoir and tube with clean cool water.
H Hang your reservoir to dry in a well ventilated area.
DEEP CLEANING YOUR RESERVOIR
(WITH OSPREY HYDRAULICS™ CLEANING KIT)
1 Rinse out the reservoir and fi ll it with warm water and a mild dish detergent, do not use bleach or boiling water.
2 With the large cleaning brush from Osprey's Hydraulics™ Cleaning Kit scrub the interior of the reservoir.
3 Remove the hose from the reservoir and the bite valve from the hose and use the small brush from Osprey's Hydraulics™ Cleaning Kit to scrub the interior of the hose.
4 Remove the silicone bite valve cover and clean it and the bite valve with warm soapy water.
5 Rinse the interior and exterior of the reservoir, hose and bite valve parts with cool clean water.
6 Let the hose and bite valve dry in a well-ventilated area.
7 Insert Osprey's Hydraulics™ Cleaning Kit drying rack into the reservoir and hang to dry in a well ventilated area.
For complete instructions on cleaning your Osprey reservoir watch,
“Cleaning an Osprey Hydraulics™ Reservoir” at youtube.com/ospreypacks.
For complete instructions on cleaning your Osprey pack, visit: ospreypacks.com/PackTech/PackCare.
ATMOS / AURA SERIES 9
OSPREY ACCESSORIES
Customize and protect your pack with Osprey’s full line of accessories.
For the full lineup, please visit your local Osprey retailer or visit:
ospreypacks.com.
PACK YOUR PACK
Loading your pack correctly optimizes comfort while you are carrying it. For complete information visit:
ospreypacks.com/PackTech/HowToPackYourPack
GUARANTEE
At Osprey, sustainability is designed into our packs, which are built to last a lifetime and backed by a superb guarantee, no matter how hard you are on your gear. Visit ospreypacks.com for details.
QUESTIONS?
Contact Osprey Customer Service. Real help from real people.
Scroll over the customer service tab at ospreypacks.com.
OSPREY PACKS, INC.
115 PROGRESS CIRCLE
CORTEZ, CO 81321 USA
866-284-7830
ospreypacks.com/PackTech/OwnersManuals
KR
www.ospreypacks.com/PackTech/OwnersManuals
에서
사용자 설명 서를다운로드하세요
OWNER'S MANUAL
S15 - UPDATED 11/14
ospreypacks.com
