Argus Match-Matic C3 User Guide
PDF
Document
Advertisement
Advertisement
Viewfinder Window Fliter Retainer
Shutter Setting Dial Lens Opening (aperture) Dial
Rangefinder Windows
Wind Knob Shutter
Cocking
Lever
Flash
Finder
Release
Film Catch
Exposure Counter Rangefinder Dial
Ито
Your new Match-Matic C3 brings you
an unequaled ease of operation in a
simplified system of photography. If
you can match one number with
another, you can take fine pictures,
every time.
The opposite page shows the impor-
tant parts of the camera and their
location. For best results, read this
book carefully and try out the differ-
ent adjustments. Try to know your
Match-Matic C3 before you load your
first roll of film. This may prevent
your missing an important picture
through lack of familiarity with its
operation.
Important Parts ......cvenevansnsl
What Makes a Picture...........3
Match-Matic Pictures ...........4
Using the Rangefinder..........5
Shutter Settings................6
Using the LCS Meter............7
Exposure Indexes...............B
Loading the Camera........ 9, 10
UNMIOREINO oo Beis sr dad mst)
Outdoor Exposure Guide......12
Using the Flash Finder.........18
Flash Exposure Guide.........14
Hints on Flash.....+…+++++++»..15
Care and Servicing ............16
Depth in Your Pictures ....17,18
Lens and Shutter
Comparlsons......es0re:reves 19
Filters.... CRA A NA
Specifications. .. To
o ms TE m В uo ps EE EE EME Ss Da ООН rE ois monn aaa om
THE LENS OPENING (aper-
THE LENS gathers the light $ |
|
„=
; |
di dial is pen control HAE and focuses a clear, sharp 5
the amount of light passin wt loed L on the film. The range-
through the ; She En. finder will es the ens E |
bered openings are used for dim 3 focus for you as you line up |
light and “slow” films; large- a Picture, > the r image. Try | |
numbered openings for bright . focusing on different subjects | 3
light and “fast” films. to see the lens moves in |
THE SHUTTER DIAL controls and out from the camera. | $ |
the length of time the shutter is THE RANGEFINDER fo- | ES
open to pass light through the cuses the lens automatically | ©
lens, Try different settings to see when the rangefinder i | В |
the change in shutter action. is lined up. This simple w|
High-numbered settings “stop” method of focusing insures $
action; low-numbe rr sharp, clear pictures. Even à
are for scenes and dim-light e» % the accessory lenses for your | «& |
pictures. „у № a 1 = camera are foc in this | 3 |
UE 7 |
088 LP me | 1
al [TONI | , у E
- Ly ae ой i © |
yes
| A )
- She ey]
— о
Fu
>.
match-matic
Кое, Пино
Just follow these easy steps for perfect pictures,
every time. Of course, you will first load your
camera (pages 9-10) and set the film's exposure
index on the meter (page 8). Then all you do is—
1 SET SHUTTER FOR TYPE OF PICTURE
AND MATCH TO METER
2 AM CAMERA AT SUBJECT AND
MATCH METER READING TO LENS
3 FOCUS WITH RANGEFINDER, COCK
SHUTTER AND PRESS RELEASE
See the following pages for detailed information
on the operation of the Match-Matic C3.
The first setting to decide on when taking a picture is the shutter
shutter number. The Shutter dial controls the length of ue the shutter Ja
ы open to admit light to the film. The low-numbered settings hold the
settings shutter open longer than the high-numbered settings. Always set the
dial directly on the shutter number, not in-between.
China Ue rangefinder
The right eyepiece on the back
of the camera is the rangefinder
Shutter Setting 6 is for Shutter Setting 5 must be
Subject in focus
Subject out of focus
№
window. Hold the camera as 1
shown, look through the range-
finder window, and turn the
rangefinder dial with the finger.
Your Match-Matie C3 lens is
automatically focused when the
rangefinder image is lined up
as shown on the bottom of this
page. No guesswork—no distance
scales to set.
After focusing, shift your eye
to the viewfinder (the left eye-
piece) to compose your picture.
Hold the camera in either a
vertical or horizontal position
to best suit the framing of your
subject.
Set the shutter re-
lease on “I” for regu-
lar shutter speeds.
For time exposures,
turn to “B” and hold
the release down for
the time desired. Be
sure to support the cam-
era and use a cable re-
lease when taking time
exp ETT ERR
RMAL picture-taking,
such as scenes and people. If
you are taking pictures of
moving subjects, use 7 or 8
whenever possible.
2
—
> >
Shutter Settings 7 and 8 9?
are for action pictures with
8 being for the fastest action.
When using a telephoto lens,
use these settings whenever
possible to prevent any cam-
era movement from showing
in the picture.
When using electronic flash units, use
mia 1
"a "Y
used for all flashbulb ex-
posures, and can also be
used for normal scenes when
lighting is too dim to use
the normal setting of O.
o
Shutter Setting 4 is the
slowest setting, and should
be used only when the cam-
era is on a tripod or sup-
ported in a similar manner
to prevent movement. Use
this setting when the lighting
is too dim for higher settings.
shutter setting 5 or higher.
He
LC:3
Meter
1 Set pointer to exposure
index of your film.
Setting of 10 is shown.
2 Turn outer dial to set
pointer at shutter number.
Setting of 5 is shown.
7
(1) Turn the inner dial on the meter so that one of the index marks points directly
at the exposure index of the film you are using. The numbers alternate between
the two scales on either side. Exposure indexes (also called ASA film speeds)
for different films will be found on page 8 and on the film instruction sheet.
(2) Turn the outer dial so that the pointer lines up with the shutter number
you have selected. Always set the shutter dial and the meter dial directly on a
shutter number, not in-between.
(3) Aim the camera and attached meter toward your picture subject.
The meter needle will point to either a black or white channel, leading up to
the lens opening number to use. If the meter needle indicates a setting between
two numbers, set the lens in the same way.
There are three groups of lens opening numbers on the lens mount so that
one will always be convenient to see from the top.
a Alon Reade
e channe
to = opening.
Lens number 6
is shown.
For average scenes, aim the meter directly at
the subject and slightly downward to minimize
the “reading” from skylight. If your subject is
in surroundings that are lighter or darker than
the subject itself, arm your meter at close range
so that the surroundings do not influence the
reading. Try to “read” average tones such as a
person's face, or if this is not possible, take a
reading from the back of your hand held about
4 inches from the meter, Be careful not to read
your own or the meter's shadow.
The f/stop numbers on the meter dial (directly
above the lens numbers) are for use with the
C3 accessory lenses.
Set the meter's shutter number pointer (on
outer dial) on EVS if you wish to read directly
in EVS numbers instead of lens opening num-
bers. (See page 12.)
Check the “zero adjustment” of your meter
occasionally by completely covering the light
cell window, If the needle does not read zero,
adjust the screw on the back of the meter
until it does.
1 Open the back by depressing the catch at
the end of the camera. Pull out the rewind
knob on the bottom of the camera (the knob
with the arrow) and insert a 35mm cartridge
with the small end facing up. Push in the
rewind knob, turning if necessary, to engage
the cartridge spool.
2 Hold the cartridge in the camera and thread
the end of the film (the leader) completely
through the slot in the take-up spindle. Turn
Now that you have tried the camera adjustments without film,
you are ready to load the camera and start taking pictures.
Your Match-Matic C3 uses 35mm
film cartridges, 20 or 36 exposures,
either color or black-and-white film.
the wind knob about one-half a turn to make
sure the film folds under itself and is secure
on the shaft.
3 Take up the slack in the film leader with
the wind knob and turn a little more to en-
gage the perforations on both sides of the
film on the sprocket teeth. If the sprockets
stop turning before the teeth are engaged in
the film holes, release the film catch and
continue turning, Close the camera back.
4 With the back closed, turn the wind
knob as far as it will go without forcing.
Hold down the film catch and turn the
wind knob about a quarter of a turn, re-
lease the catch and turn knob until it
stops. Repeat this operation. The film is
now in the correct position for the first
picture. Set exposure counter dial by turn-
ing counterclockwise to “0”. Dial will
indicate number of pictures taken.
Press shutter cocking lever down and
squeeze shutter relense smoothly for each
picture. Care should be taken so that the finger
does not interfere with the up-stroke of the
cocking lever when the shutter is released.
Always wind film immediately after taking
a picture by holding down the film catch for
a quarter of a turn, then releasing catch and
winding until the knob stops.
10
11
When the exposure counter dial reads 20 or
36, and you have taken that last picture, you
have taken all of the exposures on the film.
THE FILM MUST BE REWOUND BACK
INTO THE FILM CARTRIDGE BEFORE
OPENING THE CAMERA BACK. To rewind
the film, turn the rewind knob (on the bottom
of the camera) in the direction of the arrow.
Continue winding until the counter dial stops
turning. Turn a few more times to make cer-
tain all of the film is rewound, then open the
camera back and remove the film cartridge.
Have film processed as soon as possible after
exposing. All types of film may be taken to
your Argus dealer.
Although your camera's LC3 exposure
meter gives lens openings directly without
any calculations, you may wish to know
the basis for Match-Matic operation.
Your Match-Matic C3 uses an adaptation of
the exposure-value system (EVS). You
will find exposure-value numbers listed
under the daylight exposure table on the
data sheet packed with the film.
The outdoor exposure guide on this page
also lists exposure-value recommendations
for different films under different lighting
conditions. To use these numbers with
your camera, all you have to do is to
decide which shutter setting you want and
subtract it from the exposure value to find
the correct lens opening.
These values are for average subjects. For
dark subjects, subtract 1 from the expo-
sure value; for light subjects, add 1.
COLOR FILM Sun Bright
Bright Hazy Cloudy Cloudy
Sun
Dull
ee ie e
TR 11% 10% 9% ви
Ektachrome Type F* 124 11% 10% 9%
Ad e 14% 18% 12% 11%
Kodacolor 13 12 11 10
BLACK AND WHITE
Kodak Panatomic-X 13, 42 | 13 10
Kodak Plus-X Pan 14 18 12 1
Ansco Super Hypan 1654 15% 144 134
16 15 14 18
Kodak Tri-X Pan
*Filters must be used with indoor-type color films ex-
posed in daylight. Consult manufacturer's instructions.
The blue numbers on the range-
finder dial are the Flash Finder
numbers. The numbers as they
appear on the dial apply to
Kodachrome Daylight film with
Sylvania Press 25B flashbulbs.
To find the correct lens opening to
take a picture using this film and
Hashbulb, focus on the subject with
the rangefinder and set the lens
to the Flash Finder number in-
dicated by the index mark.
He
flash
finder
D CINTAR
3
For correct lens openings with
other films and flashbulbs, con-
sult the decal on the back of your
flashgun reflector or the flash ex-
posure guide on page 14 for addi-
tions to the Flash Finder number.
Unscrew bottom cap of flashgun and
insert two size C PHOTOFLASH
batteries or a BC unit. Press red
button on top of flashgun to eject
used flashbulbs.
EXAMPLES: Using Kodachrome Day-
light film and Sylvania Press 25B flash-
, bulbs, you focus on your subject afd
find the Flash Finder reads 5. Set the
| lens opening at 5 for correct exposure.
Using Ansco Supreme film and Sylvania
Bantam 8 flashbulbs, you focus on the
subject and find the Flash Finder reads
4. The table on this page says to add 2
for this film and flashbulb, therefore you
add 2 to the Flash Finder reading of 4
| and arrive at 6. Set the lens opening at 6,
| USE A SHUTTER SETTING OF 5 (Q)
WITH ALL TYPES OF FLASHBULBS.
Use shutter settings 5 through 8 with
electronic flash units.
Flashbulbs occasionally shatter, and to
avoid any possible damage, a shield of
translucent material may be used over
the face of the reflector. Never use flash
‘ in an explosive atmosphere.
—
flash exposure guide
Sylvania Sylvania Sylvania
FILM Y Bantam 8 Press 25 Press 25B
BULB p
Ektachrome Type F add 1 add 2} —
Kodachrome Type F add 2 add?2 —
Kodachrome Type A add %* add 1* Es
Kodacolor add 1 add 2% —
Ektachrome Daylight
Anscochrome Use blue add 2
Daylight flashbulbs
Kodachr Dayli with |
а ome Daylight Daylight o
Super Anscochrome color film. ОТ 7
Daylight add 3%
Kodak Tri-X add4 add5 —
Kodak Plus-X add 24 add 4 _—
Ansco Supreme add 2 add 3 —
Kodak Panatomic-X add 1 add 2% all
*81C-type filter required 14
nda on ad
Always set the lens opening to the exact
value the Flash Finder indicates. For ex-
ample, you may find that the index mark,
after focusing, will fall between two num-
bers. Set the lens opening in the same
manner.
If it is found that a lens number larger
than 8 is necessary for some close-up
flash pictures, use one or more thicknesses
of white handkerchief over the flash reflec-
tor to reduce the amount of light from the
~~ fashbulb. One thickness will reduce the
light by approximately one number, two
thicknesses by two numbers, and so on.
“ For example, if the Flash Finder number
is 8, and the required addition to that
number is 2, the lens opening necessary
would be 10. Use two thicknesses of
handkerchief over the reflector and set
the lens opening at 8.
For other film and flash-
bulb combinations and for
electronic flash units,
change the recommended
uide numbers to Flash
inder numbers.
GUIDE USE FLASH
NUMBERS FINDER /NUMBER
23 — 26 subtract 2
27 — 32 + subtract 1
33 — 40 subtract 1
41 — 48 + subtract Va
A: BE naa ©)
59 — 68 rm... “add Ya
69 — BO ==... add 1
a1 — Sa re » add 1%
95 — 115 РСЧС add 2
116 — 138 wu... add 2%
139 — 165 sn... add 3
166 — 195 ss0s..... add 3%
196 — 2372 se add 4
288-277 un... add 4
278-330 ~ add 5
replacement parts,
Cae
and servicing of camera
Your Match-Matic C3 is a fine camera and worth caring for.
To keep your C3 and LC3 Exposure Meter in perfect working
order, protect them from dust, moisture, and heat. Do not store
the camera in your car’s glove compartment or any other place
where temperature tends to rise. The fine lens of your C3 is
ground, polished, and coated with extreme precision. If it needs
cleaning, blow off the dust first, then use a soft brush with a light
touch or clean it with lens tissue. Use lens cleaning fluid only if
it becomes absolutely necessary. Working parts of your C3
contain fine threads, tiny screws, and sensitive adjustments. Never
force any parts of the camera to work if they resist.
For service or ll CUSTOMER SERVICE DEPARTMENT,
ARGUS CAMERAS, ANN ARBOR, MICHIGAN
or ARGUS CAMERAS OF CANADA, LTD.,
TORONTO, ONTARIO
contact your local |
Argus dealer or | Jr
write to: I
i ,
17
Did you know that if you focus your camera lens on a person at a
certain distance, the picture will also be sharp in front of and
behind the person? This “range of sharpness” (depth of field)
depends on the lens opening used and the distance on which the
lens is focused.
The larger the lens number, and the greater the lens focusing
distance, the greater is the lens’ range of sharpness. The lens
will have its shallowest range of sharpness when it is used at the
smallest number (34) and the shortest focusing distance.
When your pictures require that subjects at more than one
distance be in focus, use the largest number possible (such as 6,
7, or 8) under the lighting conditions that you have. To do this,
it may be necessary to go to a lower shutter setting, especially
when you are using a slow film such as Kodachrome.
Зи
— _ — =
When the lens is focused on the center
subject and the lens opening of 34
is used, only the center subject will
be in focus as the range of sharpness
is not very great. Example: Koda- To show all three subjects
chrome Daylight film, shutter setting sharply, use a larger lens
8, lens opening 3%, bright sunlight. number such as 71%. Set
Li the lens opening dial be-
| tween 7 and 8, The range
Ce gy | of sharpness is increased
| Fa я CE y and all the subjects are
LE A sharp. Example: Koda-
la chrome Daylight film,
u shutter setting 4 (camera
on tripod), lens opening
With a large lens opening, range of sharpness is very shallow. 7%, bright sunlight.
Notice only the boy is in focus, эт ‘
ge |
a TEE a es ка > a AR e а
a A —-= AH y ee FR | fe) e y : o “E >
A | = Но НЫ vs 1 oh
NA ARIAS — EAN a Cad
x ah) Wh) vu LU
a HF om. Й
With a small lens opening, the sharpness range extends from near the camera to infinity, and everything is in focus.
18
lens and shutter
Comparisons
Your Match-Matic C3 uses “additive”
numbers for the lens openings and shutter settings.
HRs
19
The lens openings and their equivalent
f/stops are:
he: BU gt [Ri 8
ua 86 we yn me
The shutter settings and their equiva-
lent speeds in fractions of a second are:
5
Е a ED ; — q yg =
BH 7 8
5 6 A =
т
30 | 1/60 1128 1/300
Your camera lens has a built-in
retaining ring for Series V (1345)
filters and supplementary lenses. To
insert filter, unscrew retaining ring,
drop filter in front of lens, and
replace ring. The filter can be held
in by a standard Series V lens
shade if desired.
When using filters with your cam-
era, divide the film's exposure index
by the filter factor. Set the result on
the meter’s exposure index scale.
Soe © IF aa Y N Y
PICTURE SIZE: 1" x 1%" trans-
parencies in 2" x 2” mounts, or 34" x
44” standard photo-finishers' black-
and-white prints.
FILM SIZE: 35mm cartridge (size
135), 20 or 36 exposure, color or
black-and-white film.
LENS: 50mm f/3.5 Argus Cintar,
color-corrected, coated anasticmat;
lens openings from 32 to 8 (1/3.5 to
{/16); rangefinder-coupled automatic
focusing; screw-type interchangeable
lens mount; lens’ hyperfocal dis-
tance: 46'2" at opeming 3}; field
covered: 27° x 40° angular at infinity,
SHUTTER: Behind-the-lens type;
shutter settings from 4 to 8 (1/10 to
1/300 second) plus Bulb (B) for time
exposures; ASA cable release socket;
manual cocking lever; synchronized
for bayonet-base flashbulbs and X
(zero) delay electronic flash units,
FLASH : Plug-in type, synchronized
through mountin rongs, accepts
two size “C” PHOTOFLASH Ба!
teries or a B-C power unit; five inch
polished reflector with bayonet-base
type socket; push-button lamp ejec-
tion.
LENS ACCESSORIES: Built-in
retaining ring accepts Series V (I-
34") filters and su atar lenses.
Standard Series Y lens shade can be
used in place of the filter retaining
ring.
OTHER FEATURES: Rugged,
molded body with bright metal and
two-tone leather-grain trim, weight
30 oz.; hinged, die-cast metal back;
automatic exposure counter; LC3
Exposure Meter for accurate ex-
posures; tripod socket; genuine to
grain leather carrying case wit
shoulder strap.
Record your camera's serial number and keep it in a safe place for future reference.
20
21
accessory
lenses for
the OS
The screw-type
interchangeable
lens mount on your
Match-Matic C3
permits the easy
removal of your regular
lens and the
installation of the
Argus Telephoto and
Wide Angle Lenses.
Both lenses ue,
couple to the
rangefinder.
100mm TELEPHOTO
Precision made, four-
element f/4.5 lens cuts
distance in half and lets
you take candid close-
ups from far away.
35mm WIDE ANGLE
Provides 87% more
picture area than the
normal C3 lens.
Wonderful for group
and scenic pictures.
1/4.5, four-element
construction.
Ages 500 electromatic projector
——
pe
Ti pit? Г,
[| | = Jt
La
Lets your color-slide show run itself.
Sit back, relax, and watch your slides
change at pre-set intervals, If you like,
you can change the slides yourself with
the remote control. Brilliant, 500 watt
blower-cooled illumination combines
with the 4” Argus f/3.3 projection lens
y for big, life-like pictures, even in a
| small room,
Other outstanding features include
completely electric operation, pre-
heating of slides, remote control, and
vinyl-covered metal carrying case.
argus FLASH-FINDER
First set shutter dial on 5 | for all flash,
For Kodachrome Daylight with
No. 258 (blue) flashbulbs*. . .
- ~
Focus rangefinder
on subject
Set lens to
Flash-Finder number
*See Flash Decal for other film and Ha hbhulb combinarion:
a — — — -= — 70 0 o
EEE
Ч = Ge
"=
m: atch-matic сз
The
camera
that's as
easy to set
as a clock
argus match-matic C3
THE PICTURE YOU WANT TO TAKE SETS THE CAMERA FOR YOU
1 Set
meter 3 Point camera
for your at subject and
film match meter
Kodachrome Daylight (10) reading
Ektachrome Daylight
to lens
Anscochrome Daylight 32
= Set shutter for
type of picture
and match to meter
LITHO IN U.S.A.
Your Argus Match-Matic C3 Camera and
LC3 Meter were manufactured, inspected
and tested by skilled craftsmen. They are
guaranteed to be free of defects in workmanship
or material during their lifetime. If any
servicing is necessary because of imperfections
in materials or workmanship, your camera
and meter will be factory serviced without
charge.
Argus equipment which has been damaged,
mishandled, or worn from extensive use will be
factory serviced at established rates.
Equipment purchased as used or rebuilt
is not covered by this guarantee.
ARGUS CAMERAS, ANN ARBOR, MICHIGAN
Division of Sylvania Electric Products Inc.
ARGUS CAMERAS OF CANADA, LTD., TORONTO, ONTARIO
PART МО. 14653-5910 LITHO IN U.S.A,
">
/
Download
Just a friendly reminder. You can view the document right here. But most importantly, our AI has already read it. It can explain complex things in simple terms, answer your questions in any language, and help you quickly navigate even the longest or most compilcated documents.
Advertisement