Laser Range Finder

User’s Manual Model # Z6X

INCLUDED ITEMS

1) Laser Range Finder Unit

2) Carrying Case

3) Lanyard

4) Lens Cloth

5) Product Information Guide

Laser Range Finder

User’s Manual Model # Z6X page 2

GETTING STARTED

1 To open the battery compartment cover on the back of the unit pull up the Tab and turn it to the left, according to the compartment door.

The arrows will match up and the cover can now be removed.

2 Once the battery compartment cover is removed insert a CR2 battery with the plus (+) facing down.

page 3

3 To close the battery compartment cover align the arrows (the tabs can only go in one way) then push down and turn it to the right, according to the compartment door.

4 Install lanyard strap, Turn unit over to the bottom side and insert one end of the lanyard thru the hole. Push “long” end of lanyard thru the small loop and pull taught.

5

Locate and press the Power button briefly to turn the unit on.

6

The LCD will show one of 4 images, depending on what setting was on when last powered off.

Power Button

Y M

Displays shown are in NormalDistance Mode page 4 page 5

7 Focusing the Unit. Locate the adjustable eye piece, turn left or right until images are in focus.

page 6

SWITCHING BETWEEN

MODES

Pressing the “Mode” button will toggle between the following modes:

1. Normal Distance in Yards

2. AI Distance in Yards

3. Normal Distance in Meters

4. AI Distance in Meters

Mode Button

1

Normal Distance in Yards - When in this mode, the Line of Sight distance in yards is the only information displayed on the screen.

Normal Distance in

Yards mode gives an accurate normal distance to target.

Line of Sight Distance is 200 Yards

2 AI Distance in Yards - When in this mode, the True Distance in yards and vertical angle are displayed on the screen.

AI Distance in Yards mode compensates for the angle of incline or decline in terrain to give an accurate distance to target.

With AI™ T

-35 echnolog y = 300 yard s

Without A

I™ Technolog y = 366 yard s page 7

3

Normal Distance in Meters - When in this mode, the Line of Sight in meters is displayed on the screen.

Normal Distance in

Meters mode gives an accurate normal distance to target.

Line of Sight Distance is 274 Meters

4

AI Distance in Meters - When in this mode, the True Distance in meters and vertical angle are displayed on the screen.

AI Distance in Meters mode compensates for the angle of incline or decline in terrain to give an accurate distance to target.

With AI™ T

-35 echnolog

Without A

I™ Technolog y = 274 m y = 335 m eters eters page 8

RANGING

Press the Power button one time and release to start ranging. While measuring the distance to target being ranged, the transmitting symbol will blink. When the unit is done measuring, the data will be displayed on the screen.

LCD display shown with Distance in

Yards Mode on.

Note: If target is out of range or a measurement was not obtained the unit will display “- - - -” on the screen. page 9

SCAN MODE

To use in “Scan Mode” press and hold the “Power” button and, “Scan” will then appear on the screen. As you change targets the measurements on the screen will change. Release the start button to leave Scan mode. Scan mode can be used in any ranging mode.

page 10

LOW BATTERY

If low battery indicator icon appears on the screen, the battery has a low charge and should be changed as this could cause a ranging error.

POWER SAVER MODE

Unit will automatically power off after 20 seconds of button inactivity.

CLEANING

To clean the lenses use the cleaning cloth provided with the laser range finder. Use a circular motion when cleaning the lenses with the cleaning cloth.

If you use anything other than the cleaning cloth, make sure that is soft and not coarse, as this may scratch the lenses.

You may also use isopropyl alcohol to clean the lens, but always apply it to a soft cloth first and never directly on the lens itself.

SPECIFICATIONS

Max Range:

Power:

Eye lens:

Object lens:

View angle:

Precision:

Water Resistant:

Scan mode:

Angle Logic:

Weight:

Size:

Battery:

LCD:

Power Saver:

Warranty: up to 600 yards

6x

15.5mm – anti-fog

23mm

7 degrees

+/- 1 yard

Yes

Yes

AI ™ Technology

5.3 oz.

4.1” x 3.0” x 1.6”

CR2 (Not Included)

Gray color text/icons

20 seconds without pressing a button

1 year page 11

WARRANTY

DISCLAIMERS

WGI Innovations, LTD is not responsible for damage, expense or injury caused by the unauthorized use of, alterations to, improper connection of and abuse or neglect of the WGI Innovations™ products.

WARRANTY

For the warranty to be in effect, you MUST completely fill out and mail the warranty card along with your proof of purchase to WGI Innovations ™ within (14) days after the date of purchase. As an alternative to mail, you may also visit our website and register your product at www.halooptic.com (you are still required to mail WGI Innovations ™ your proof of purchase before the warranty is placed in effect.) Follow the onscreen directions to complete the process.

WGI Innovations, LTD will replace all workmanship defects free of charge for ONE (1) YEAR after the date of purchase as long as your warranty is in effect.

This warranty DOES NOT COVER damage, expense or injury caused by unauthorized repairs, alterations, improper connection, shipping, abuse, theft, accident, neglect or collateral loss.

When returning product(s) for service you MUST obtain a Return Merchandise Authorization (RMA) number from WGI Innovations, LTD. Please include name, UPS address (No P.O. Box), telephone number, RMA number and a complete description of the problem on all enclosed correspondence.

When possible, pack product carefully in original carton. Customers are responsible for any shipping page 12 cost to WGI Innovations ™. WGI Innovations™ will pay the shipping cost of replacement product to the customer. We are not responsible for damage incurred in returning items for repair.

For product service send to:

WGI Innovations ™

602 Fountain Parkway

Grand Prairie, TX 75050

(800) 847-8269 www.halooptics.com

Thank you for your purchase!

CUSTOMER SERVICE

WGI Innovations, LTD. stands behind every product we manufacture for a one year product workmanship warranty and a strong commitment to customer service. If you are in need of customer service for missing parts or need assistance with the operation or assembly of your product, we encourage you to call one of our customer service representatives and let us assist you with your

WGI Innovations ™ product.

DISCLAIMER

WGI Innovations, LTD reserves the right to make changes to product features, functionality and physical design at its sole discretion. As a result, such changes may not be reflected in this version of the manual.

page 13

FCC

FCC STATEMENT

Product Name: Laser Range Finder

Trade Name: Wildgame Innovations

Model# Z6X

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two criteria: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equippage 14 ment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment

and receiver.

-Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/TV

technician for help.

REGULATORY DISCLOSURES

Caution – use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Class 3R Laser Product

This product complies with IEC 60825-1

2007-03 Ed.2.0 & with 21CFR 1040.10 &

1040.11 except for deviations pursuant to

Laser Notice No. 50, dated June 24, 2007.

Max. Output: 0.1 µJ.104HZ. 902.0nm.

page 15

602 Fountain Parkway

Grand Prairie, TX 75050

800.847.8269

“Wildgame Innovations” and the “Button Logo” are TM trademarks of Wildgame Innovations, LLC.

“Sport Responsible” and “Halo” are TM trademarks of WGI Innovations, LTD.