Teklynx LabelView Quick Start Guide
تبلیغات
تبلیغات
LabelView
Quick Start Guide
For
Windows
More detailed information can be obtained through our on-line manual. Just press F1 from anywhere within LabelView.
© Copyright Teklynx International, 1989-1998. All rights reserved
LabelView is a trademark of Teklynx International
Printed 10/98
All other brands and product names are trademarks and/or
Copyrights of their respective holders.
2
LabelView Bar Code Design Software
Table of Contents
Installing LabelView ............................................................................................................................. 9
System Requirements:.................................................................................................................................... 9
Install the Security Key: ................................................................................................................................ 10
LabelView Windows 3.1x and NT 3.51 Installation: ................................................................................... 11
Windows 95 and NT 4.0 Installation: ........................................................................................................... 11
Starting LabelView...............................................................................................................................11
For Windows 95 and NT4.0:......................................................................................................................... 11
For Windows 3.1x and NT3.51:.................................................................................................................... 11
Installing Printers in LabelView ..........................................................................................................12
Install a Thermal Label Printer...................................................................................................................... 12
Select a Label Printer.................................................................................................................................... 12
Label Design ........................................................................................................................................13
Open and Edit a Label Format: .................................................................................................................... 13
Delete Fields:................................................................................................................................................. 13
Edit / Move / Resize Fields: .......................................................................................................................... 13
Save a Label:................................................................................................................................................. 13
Create a New Label Format ......................................................................................................................... 14
Adding Fields to the Label ..................................................................................................................15
Adding Text:................................................................................................................................................... 15
Adding Paragraphs:....................................................................................................................................... 17
Adding Bar Codes: ........................................................................................................................................ 18
Adding Pictures: ............................................................................................................................................ 18
Adding Boxes and Lines: .............................................................................................................................. 19
Printing Labels from LabelView..........................................................................................................20
Print a Label ................................................................................................................................................... 20
Important Functions ............................................................................................................................21
Directories: ..................................................................................................................................................... 21
LabelView Bar Code Design Software
3
Shortcut Keys: ............................................................................................................................................... 21
Appendix A: Network Installation .......................................................................................................22
Appendix B: Common LabelView Functions ....................................................................................23
Contact us at Teklynx:.........................................................................................................................30
Throughout this manual, you will find this symbol. It signifies that the feature only applies to the
GOLD
Version.
4
LabelView Bar Code Design Software
LabelView is a powerful yet simple to use label design software package that allows for the design of many types of labels for virtually all types of industry. A label designed in LabelView can include Text, Bar Codes, Graphics, Lines, and Boxes. See how easy it is! Let’s start!
LabelView Bar Code Design Software
5
LabelView Software Features
“+”
=
new in this version, “
a
Feature Benefit
General
+
Select what you need
Affordable print only edition
Affordable, buy the features you need at a price you can afford. Basic, Pro, or Gold.
Print Only editions allow users to enter data & print, but user cannot create or change labels.
Any Windows platform
Runs on Win 95, 98, 3.x, and Win NT 5.0, 4.x, and 3.x.
Network editions Use with Novell, NT and Win ‘95/98 networks. Network versions available for 3 to 100 concurrent users. Software and network security key may be installed on server OR client, respecting network administrator requirements.
Click Print
1 Click to select and start printing your labels. The fastest and easiest way yet to control bar codes. Allow multi-line descriptions of labels for positive selection. Now lightning fast!
Generate any Bar
Code
24 different bar code symbologies are supported to meet any industry or compliance requirement.
+
Print 2D Bar
Codes
Intelligent support for 2D
Bar Codes
Fast & accurate data entry and selection
+
Multiple
Language
Support
PDF-417, DataMatrix, and Maxicode are supported.
Link multiple fields or database records to create complex "paragraphs" for PDF-417. Or use the MaxiCode wizard to build UPS Maxicode shipping codes. All with simple 'clicks'.
It’s easy to setup “drop down” pick lists to help users choose the correct data. Or lay out prompts in any order. All with point and click simplicity.
For worldwide ease of use. 18 languages are built in, others can be added easily.
Wide Array of Printer choices and options
Works with virtually any thermal bar code printer at full printer speed with NO delay for bar code imaging. Use built in fonts for speed, use true-type fonts for design flexibility.
Will print bar codes on any Windows printer, creating the proper graphic image for each bar code.
+
Over 400 thermal bar code printers
Over 300
Windows printers supported
Control printer features
+
Switch between printers
+
Intelligent Print
Station
+
Supports Print
Pad for affordable printing
Printer specific features such as incrementing, cutters, stacker, peelers, batch separators and temperature control are simple to manage within LabelView.
Automatically converts formats to work with ANY supported printer, at print time, with no work required.
Set time of day, priority or schedule label printing as needed. Controls multiple printers. Smart status messages detect printer errors (e.g. ribbon out) and explains the problem simply. (Requires Windows '95, 98 or NT)
Design Labels, link graphics and databases. 1 click downloads everything necessary for Print Pad. The lowest costing, fully functioning label control system available.
# of fields on a label
Ease of Use for label design
Powerful design feature for complex needs, limited for our simpler, lower cost software package.
See it, print it
Full what-you-see-is-what-you-get (WYSIWYG) design functionality.
Label Previews
See thumbnail previews of labels or graphics for peace of mind control.
+
Easy editing
Right click pop-up help, undo functions, block move, copy operations & zoom make design faster.
+
Precise control
Snap-to-grid, precisely set X & Y coordinates, US or metric measurements & justification for easy precision.
Long file names
(95, 98 and NT only)
Specify and Control data sources
Conveniently store labels with longer file names.
6
LabelView Bar Code Design Software
Basic Pro Gold
• • •
• •
• • •
• •
• • •
• • •
• •
• •
• • •
• • •
• • •
• • •
• • •
• •
• • •
• •
25 No
Limit
No
Limit
• • •
• • •
• • •
• • •
• •
“+”
=
new in this version, “
a
Feature Benefit
+
Open on Internet Access label files from any Internet IP address. Design in one place, use globally.
Color on demand Create full color labels for many new thermal printers with native support speed.
Color labels for color Windows printers
When printed fields
Incrementing
Create full color labels for any color Windows printer.
Prompt operator for data at print time, in easy data entry format.
Start with any number, software will increment any field(s) for each label.
+
Serial number control
Simple Pick-list
‘Drop-down’ data entry
Add powerful logic with linked fields
Flexible date and time stamping
Accumulator
Automatically create, increment and control simple or complex serial numbers for every label. Meets ISO and QS-
9000 standards. Supports alpha/numeric numbering.
Easily add Windows style “drop-down” selection box for easy and accurate selection of data for when-printed fields.
Our linked fields process makes it easy to add logic, math and data manipulation to fields. It’s easy to parse or concatenate fields (e.g. build UPC label by adding 5 digit item to manufacturer code).
Controls
+
Database
Manager included
+
ODBC (Open
DataBase
Connectivity)
Select from dozens of date and time formats. Specify shelf life and have system print expiration date. Supports 7 year accounting calendars used by major companies to correctly print production week.
For work and product measurement and printing. Create and control accumulators, to track and print total units per case, labels per day, etc.
Create, edit and use databases for label production (or use almost any Windows compatible database program).
Use data from applications such as Microsoft Access, FoxPro, Visual Basic and more. Full 32-bit compatibility.
+
support
Password controlled design
Assign a password to Allow/Restrict who may print or change a label, to keep pre-production labels from being used prematurely.
management
Password controlled user access
Safety and
Compliance
Symbols
Link graphics to
Database(s)
Multiple level control, restrict or allow users access to label and database design, printing and modifications.
Graphics
+
Flexible graphics Supports widest array of 42 different graphic formats including PCX, BMP, TIFF, GIF, IMG & JPEG. Import or use any image, easily, including rotate, shrink, stretch & grow.
A special font offers dozens of safety, cleaning and compliance symbols to meet your needs.
Easy to generate the right picture for each label. Automatically select graphic based on item being printed.
Paragraphs
Paragraph fields and paragraph
For long descriptions, ingredients or material lists. Includes word wrap and complete font control.
editor
Link to database Database can reference paragraph files which will be automatically linked & printed.
Media Management
Media Magician
(Add on module) Sophisticated automatic media management system. Calculate usage, trends, waste, lead times and sends order into via fax or internet automatically.
Label Logging reports
Track label production and produce flexible user definable reports.
Sample labels
Documentation, help and samples
Dozens of sample labels and graphics for many industries that meet compliance requirements.
Basic Pro Gold
• •
• • •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
• •
• •
Option Option
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
LabelView Bar Code Design Software
7
“+”
=
new in this version, “
a
Feature Benefit
+ Help file with tutorials
Hundreds of screens of context sensitive help, tutorials and samples for quick proficiency.
Visual Basic forms builder
Label Select
DataWatch
LabelView GOLD: 3
rd
Part Integration Tools
Creates Visual Basic data entry screens for front end applications. Add custom edits, layouts, logic in minutes.
Select product from database, automatically select label format, printer and fill in appropriate data fields.
The easiest way ever to print bar codes from RF or batch data collection applications.
CommWatch
DDE Support
Visual basic and remote control
AS/400, UNIX,
Host support for
ERP/MRP
Applications
Print to File
Configure LabelView to link to weigh scales, bar code scanners, shop-floor controllers, counters etc.
Link to hundreds of applications that support Dynamic Data Exchange.
Allows complete external control of LabelView from launch to shutdown and everything in between. Simplifies data collection applications that need to print labels, using LabelView as a background print engine, for any supported bar code printer.
Choose from many types of command files sent by mainframe application(s). LabelView Gold will manage the label creation and print automatically. Flexible formats minimize programming.
Send the special printer data stream we created for bar code printers to a data file, for incorporation into mainframe or portable terminal applications that need to print labels.
LabelView GOLD simplifies data collection and bar code integration. Saving time and money.
Basic Pro Gold
• • •
•
•
•
•
•
•
•
•
To see what edition you own,
Hit the F7 key from LabelView’s main screen.
To upgrade your software to get more powerful and advanced features,
Contact your LabelView specialist or tech support.
8
LabelView Bar Code Design Software
Installing LabelView
System Requirements:
•
IBM 386 or higher computer certified for use with Microsoft Windows Version 3.X or Windows 95/98, Windows NT 3.51 or
Windows NT 4.0 (client / server).
•
10 MB of free space on hard drive.
•
4 MB of RAM (16 MB recommended.)
•
Parallel port.
•
Mouse (required)
•
Serial port (if required by printer)
NOTE: The 32-bit version of LabelView will run only on Windows 95, Windows 98, and Windows NT.
There are 2 elements necessary for putting LabelView onto the computer system: Load the software, and connect the
security key
to the computer.
LabelView Bar Code Design Software
9
Install the Security Key:
#1 = Hardware Key / Sentinel / Dongle
#2 = LPT1 / Parallel Port
#3 = The key can go between a laser/dot matrix printer and the computer.
#4 = The male (pins) side of the key goes into the female plug (with the holes) on the back of the computer.
If the key is not properly installed, LabelView will start in Demo mode.
10
LabelView Bar Code Design Software
LabelView Windows 3.1x and NT 3.51 Installation
:
1. Insert the
LabelView Install Disk
(disk #1) in drive
A:
(or change this to the appropriate drive letter for the floppy drive).
1. Open the
Windows Program Manager
.
1. Select
File
+
Run
.
1. Type
A:\Setup
.
1. Select
OK
.
1. Follow the instructions on screen.
Windows 95/98 and NT 4.0 Installation:
1.
Insert the
LabelView Install Disk
in drive
A:
1. Click the
Start
button.
1. Select
Run
.
1. Type
A:\Setup
.
1. Select
OK
.
1. Follow the instructions on screen.
Starting LabelView
For Windows 95 and NT4.0:
2. Click the
Start
button, and then place the mouse pointer over the
Programs
listing.
3. Locate
LabelView
on the pop-up list of available programs and point to it until it expands.
1. Click on the
LabelView
icon to start the program.
For Windows 3.1x and NT3.51:
2. Locate the LabelView icon on the desktop and double-click on it to open.
1. Find the LabelView program icon in this window and double-click on it to run the program.
LabelView Bar Code Design Software
11
Installing Printers in LabelView
Install a Thermal Label Printer
Drivers included with LabelView, are loaded onto the computer when the program is installed. LabelView supports hundreds of different, specialized, thermal label printers (included with LabelView) and any printer with a valid Windows driver supplied by the manufacturer. Refer to the Windows user manual or Printer Documentation for installation instructions.
2. In LabelView, Click on
File
+
Select Printer
+
Install
3. Select the printer to be installed from the
Available Printer Drivers
menu and click on the
Install
button.
4. The new printer will be copied up to the Installed Printers window
5. Click
Connect
and choose the correct port.
6. If the printer is connected to a Serial port, the driver in Print Manager / Printer Folder will need to be configured to match the printer settings (baud rate, data bits, stop bits, parity, flow control).For serial printers only, click on
Settings
to configure these options. Please check printer documentation to determine printer settings.
1. Click OK/Close until the main screen reappears.
You may also install printers through Windows Print Manager/Add Printer Wizard. Check the Windows manual for further help. The
LabelView drivers are found in the LabelView program directory, in a folder called Drivers.
Note: refer to the on-line manual for information on Serial port settings.
Select a Label Printer
1. Go to
File
+
Select Printer
.
1. Choose a printer from the list provided. Click on the Scroll bar if necessary to view installed printers.
12
LabelView Bar Code Design Software
Label Design
Open and Edit a Label Format:
1. Go to
File
+
Open
.
1. Locate the desired label, and double-click on it to open.
Note: If the label was originally created for a printer other than the one currently selected, you will be asked if you want it converted to the new printer. If “No” is chosen, the label will not open.
Delete Fields:
To Delete a field:
2. Move the mouse over the field and click the left mouse button to select it.
1. Hit the
delete
button on the keyboard.
Edit / Move / Resize Fields:
2. Double-click the left button to Edit any field on the label.
3. Hold the left mouse button down on a field to Move (drag) a field. Release the button when the desired location has been reached.
1. Click once on the field to activate the handles to Resize the field. Drag the handles to adjust the size.
Save a Label:
When label design is complete, it must be saved.
1. Select File + Save.
1. Enter the name of the label. Specify the desired location for the label format being saved. This operation is identical to saving files from any other Windows program.
1. Click
OK
to save the label.
LabelView Bar Code Design Software
13
Create a New Label Format
2. To create a new label, go to
File
+
New
.
1. Fill in the information as it applies to the label, and click
OK
when finished.
Labels on Rolls Labels on Sheets
#1 =
Label Width
#6 =
Horizontal Gap
#2 =
Label Height
#3 =
Left Margin (usually 0)
#7 =
Top Margin (sheets only)
#8 =
Labels Down (sheets only)
#4 =
Vertical Gap
#9 =
Direction of Printing
#5 =
Labels Across
Print Speed
(For Thermal Printers Only!) The label is printed at this speed. Adjusting the Print Speed will affect the print quality.
Temperature
(For Thermal Printers Only!) The label is printed at this temperature. Increasing the Temperature will make the printing darker, but can cause a blotchy appearance around the printed images, which can severely affect bar code quality. Higher temperatures will also reduce print head life.
14
LabelView Bar Code Design Software
Note: Not all functions can be set for all printers.
Adding Fields to the Label
Seven different types of fields can be added to the label: Text, Paragraphs, Bar Codes, 2-D Bar Codes, Pictures, Boxes,
and Lines.
2D Bar Code
Text
Paragraph
Box
Picture Bar code
Line
Adding Text:
Click on the
Add Text
button.
Font
Select the desired typeface.
Expand Height/Width or Point Size
Controls the height and width of the font.
LabelView Bar Code Design Software
15
Rotation
Controls the rotation of the Text field. The options are Normal, Sideways Up, Sideways Down, and Upside Down.
Data Source
This tells LabelView where the information will be coming from. Default value is Fixed (never changing).
Fixed
the text is entered at design time and remains constant.
When printed the text is entered at time of printing by the operator
Linked
Database
Date Stamp
the text is taken from one or more other text or barcode fields on the label. Other fields are referred to by their field name.
the text is retrieved from a database file. The user is prompted for a key value, such as partnumber, which is then looked-up in a database to retrieve related information,.
the current date is retrieved from the computer at the time of printing. The user will be prompted to select a date format.
Serial File
ODBC DB
the data is retrieved from a serial file at time of printing. The serial file is updated after printing.
Open Database Connectivity is a Microsoft product that allows data files to be shared between programs such as Excel and LabelView. Refer to on line help for more information on ODBC.
CommWatch
the data is retrieved from an external serial device such as a scale, scanner, or a portable data collection terminal.
Accumulator file this feature can take data from any field on a label after printing and add its value to a specified file. This accumulator file can take data from multiple label formats and can then be printed to any label as a data source.
Pick list
the data comes from a pre-configured drop down menu allowing exact entry of data with no user errors or unauthorized entry.
Text String
This is where the text on the label would be typed.
For examples of data sources, go to the help file and look under
“
LabelView Manual
+
Design a Label
+
Text
+
Text Attributes
+
Data Source
”.
16
LabelView Bar Code Design Software
Adding Paragraphs:
Click on the
Add Paragraphs
button
Characters/Line
Number of letters to appear on each line of the paragraph.
Maximum Lines
Determines the number of lines that the paragraph will have. Make sure you have enough space reserved for the largest file used.
Line Spacing
Amount of space left between each line of text. “0” space will make the paragraph hard to read.
Justification
Aligns the text (according to the rotation of the paragraph) to the left or right margins, or centers the lines within the space allowed.
Paragraph File
All paragraphs are drawn from simple text files (use Windows Notepad or Wordpad). Enter the Name of the text file to print here.
LabelView Bar Code Design Software
17
Adding Bar Codes:
Click on the Add Bar Code button
Bar Code Type
There are many types of bar codes used worldwide. Bar code types are known as symbologies. Not all bar codes are available on all printers. LabelView supports the following bar code symbologies:
UPC-A, A+2 and A+5
UPC-E, E+2 and E+5
AN 8, 8+2 and 8+5
EAN 13, 13+2 and 13+5
Interleaved 2 of 5
Interleaved 2 of 5 mod 10
UPC Shipping Container
Plessey
PDF-417
Codabar
Code 39
Code 39 Mod 43
Code 93
Code 128 A
Code 128 B
Code 128 C
Maxi Code
QR code (available 2 nd
qtr. 1998)
Multiplier
While the relative thickness of the bars is defined by the bar-width ratio, the overall thickness of the bars can be changed using the bar width multiplier. Use this value to adjust the overall width of the bar code.
Human Readable
Choosing “Yes” makes the bar code value appear below it.
Bar-Width Ratio
Controls the relative size between thick and thin bars and spaces.
Height
Specifies the height of the bar code in inches or millimetres, depending on the configuration setup.
Adding Pictures:
Click on the
Add Pictures
button.
Ratio
Determines if and how the image can be resized. Fixed means both the height and width will remain proportional as the size changes. Stretchable means there is independent control of the height and the width. Non-Resizeable means the picture cannot be altered.
Pictures
Specify the name of the desired picture file for insertion. (example, ring.pcx)
Preview
Place a check in this box to see a thumbnail of the full picture before placing it on the label.
18
LabelView Bar Code Design Software
Adding Boxes and Lines:
Click on the
Add Boxes
or
Add Lines
button or When a line is added to the label, it first appears in a default size set by the program. Click on and drag the handles provided to reshape and resize the object. Clicking on the item where there is no handle allows the object to be dragged to a new location on the label. When adding boxes the user will first be prompted to enter the thickness of the vertical (top to bottom) or horizontal (left to right) lines.
LabelView Bar Code Design Software
19
Printing Labels
Print a Label
1. With the label open,click on the
icon and enter the correct information.
1. For databases, click on the button to view and choose the record(s) to be printed.
20
LabelView Bar Code Design Software
Important Functions
Directories:
Go to
Options
+
Directories
. The Directories menu allows you to specify the location LabelView will use when it looks for associated files (pictures, databases, text files, serial files, etc.). If files are not appearing where expected, check the directory paths. Type the path of the directory in which the specific type of file is located (e.g. C:\LVWIN\DBF). The Browse buttons allow for file search, if the location is not known.
Shortcut Keys:
LabelView has assigned special functions to certain buttons on the keyboard.
Esc
Cancels the current operation without making any changes and returns to the previous screen.
H (Horizontal)
Centers the currently selected field(s) horizontally (left-to-right) on a label
V (Vertical)
Centers the currently selected field(s) vertically (top-to-bottom) on a label
LabelView Bar Code Design Software
21
Appendix A: Network Installation
This section applies only if a Network Security Key is present. The Network key is compatible with the following network protocols:
NETBIOS
IPX/SPX
TCP-IP (using NetBIOS Named Pipes)
LabelView's network version can be installed in many ways depending upon the network O/S (operating system) platform being used. Determine which of these options best suits the needs:
Network Operating System Protocol Location of Key File to Run Where to Run File Notes
Novell
NetBIOS
IPX/SPX
NetBIOS
IPX/SPX
File Server
Any Workstation
Any Workstation
NSRVNI.NLM
NSRVDN.EXE
NSRVDI.EXE
File Server
Workstation with
Key attached
Load NLM (Network Loaded Module) onto File Server. It becomes part of the Operating System.
Use this option if you don't want to load the NLM above.
Windows
Peer-to-Peer
All Any Workstation NSRVGX.EXE
Workstation with
Key attached
This file can be put into your Startup group so it always runs with Windows.
Windows NT
Server (Optional)
All File Server NSSRVICE.EXE
File Server This is an optional installation for Windows NT Only.
Consult your network administrator to determine your particular settings.
On Windows NT systems, all installation and setup must be done using full administrator rights. LabelView must be installed on the computer with the key to load the required files.
The specified file must always be running whenever someone wants to use LabelView.
All copies of LabelView must have the “Use Network Key” box checked under Options + Configuration + General.
Restart LabelView after making this change.
22
LabelView Bar Code Design Software
Appendix B: Common LabelView Functions
Database Editor
The Database Editor is provided to allow for the creation of databases and the editing of existing ones. It reads and writes dBase (dBase III or IV) files with the extension .DBF. If ODBC drivers are installed on the computer, it can edit these source files as well. To access the database editor, either click on the icon in the LabelView program group, or access it within the program from the
Tools
+
Database Editor
menu.
Serial Numbers
Serial Files are used when creating labels that will each automatically have a unique number. Use of a serial file will allow
LabelView to remember the last number printed and to start from this point on the next print job. Incrementing (increasing or decreasing) without using a serial file will cause the program to begin at the same number every time. To set up a Serial file go to
Options + Serial File.
LabelView Bar Code Design Software
23
Appendix C: Bar Code Symbologies
LabelView supports all of the most common linear bar code symbologies in use today. Almost every industrial specification for bar codes will make use of one of these standard bar codes.
UPC A
Used primarily in the retail industry as the Point-of-Sale bar code symbology. It designates the manufacturer and its product within one bar code. UPC A encodes 12 numeric digits:
1
2-6
system digit the manufacturer's ID number, given by the appropriate registration body
7-11
represents the product
13 a check digit based on the preceding 11 digits, this digit is calculated by the software so there is not need to enter it manually
UPC-A has two variations (UPC-A Plus 2 and Plus 5) which increase the amount of information contained. They add either 2 or
5 digits in a second, smaller bar code following the first.
24
LabelView Bar Code Design Software
UPC E
UPC-E (also known as the "zero suppression version") is also used in the retail industry. The data must contain 7 numeric digits with the software calculating the 8th digit, which is a check digit.
Like UPC-A, the E type has both 2 and 5 digit extended versions.
UPC Shipping Container
Used in the retail industry, all data must contain 13 numeric digits, with the program finding the 14th digit, which is a check digit. This symbology must have the human readable attribute set to "Yes".
EAN 8
EAN 8 is used in the international retail industry. The data must contain 7 numeric digits. The software will determine the 8th digit.
LabelView Bar Code Design Software
25
EAN 13
Symbol used in the international retail industry. The data must contain 12 numeric digits. The program will calculate the last digit. The 13th digit is a check digit.
Like the UPC's, both of the EAN bar codes have an extended Plus 2 and Plus 5 version
Code 39 / C 39 mod 43
Symbology used in almost every industry except retail. Data is of variable length and can contain alphanumeric characters.
26
LabelView Bar Code Design Software
Interleaved 2 Of 5 / Interleaved 2 Of 5 mod 10 (ITF)
Symbology used in many types of industry, the data can be of any length but must contain an even number of characters, otherwise the printer will add a leading zero.
Code 128 A, B, C, F1() Mod10, Autoswitching
Symbology used by many industries for inventory control. Data is of variable length. Code 128 C must contain an even number of characters (a leading zero will be added if not) and will only accept numbers. C128 B can accept the full ASCII character set, while version A can only accept a reduced set. Autoswtiching is a software feature which will determine the combination of A,
B and C that will produce the smallest bar code given the data entered. The F1/Mod10 option will add a Function 1 character to the beginning of the bar code, and a Mod10 check digit to the end.
LabelView Bar Code Design Software
27
UCC/EAN 128 / Multi
Specialized application of the Code 128 symbology, (requires data to be numeric only). The exact specifications of the meaning of each piece of data, varies between industries. The Multi option requires input that is more exacting; it automates some of the data entry functions with regards to the various Application Identifiers and the type of information each will require.
Codabar
Symbology used primarily in the library and medical industries; allows data that is alphanumeric ( may contain either digits or characters) and variable lengths.
Plessey
Bar Code symbology used extensively by libraries. A modified form of Plessey (MSI) is used to mark retail shelving for scanning for inventory purposes.
Postnet
Symbology used on envelopes and parcels by postal processing centers for faster delivery.
28
LabelView Bar Code Design Software
2D Bar codes
The main advantage of 2D symbologies IS that they encode a great deal of information into a relatively small space. These codes, such as PDF 417, Maxicode, QR code, DDF, and Data Matrix, require special scanners for them to be read.
PDF-417
Widely used by the Health Care industry, PDF-417 uses no separator bars. Short bar heights are employed, thus providing the scanner with a high degree of tilt tolerance. One of several 2D symbologies; currently the most popular.
Maxi Code
Another 2D symbology that is used extensively by
United Parcel Service
(UPS), with characteristics similar to PDF-417.
LabelView Bar Code Design Software
29
Contact Teklynx International:
Technical support/help: Americas (905) 677-8865 Europe/Asia +33 562 601 080
On the World Wide Web:
www.labelview.com
Email:
[email protected]
By fax:
(905) 677-6078
For Information on Upgrades:
Internet: [email protected]
}
U.S. – Milwaukee
727 West Glendale Ave.
P.O. Box 1786
Milwaukee, Wisconsin
U.S.A. 53201-1786
Tel: (414) 906-5434
Fax: (414) 358-5145
Canada
7035 Fir Tree Drive,
Suite 9,
Mississauga, Ontario
Canada L5S 1V6
Tel: (905) 677-5645
Fax: (905) 677-6078
Asia
55 Ayer Rajah Crescent,
#07-05
Singapore 139949
Tel: +65 773 9293
Fax: +65 775 7929
U.S. – Ohio
251 S. Mulberry Street,
Suite 130,
Troy, Ohio
U.S.A. 45373
Tel: (937) 332-0045
Fax: (937) 339-1490
Europe
2, rue Vincent Van Gogh,
Z.I. Est
32020 Auch cedex 9
France
Tel: +33 562 601 080
Fax: +33 562 601 089
Japan
Sumitomo Fudosan Shin
Yokohama Bldg. 8F,
2-5-5, Shin Yokohama
Kohoku-ku
222 Yokohama, Kanagawa
Japan
Tel: +81 45 474 2800
Fax: +81 45 474 6701
30
LabelView Bar Code Design Software
دانلود
پیوند عمومی به روز شد
پیوند عمومی به چت شما به روز شده است. You may view and manage your chat links after registration here.
پیوند عمومی سند
تبلیغات
