advertisement
Addison Platform Beds
DUET finish
Assembly Instructions
Model #
3816DUETa
Addison Queen Platform Bed
3818DUETa
Addison King Platform Bed
IMPORTANT NOTES:
Wood can be susceptible to changing color over time when exposed to strong sunlight. Use window shades, drapes or blinds to protect your furniture. To help the surface age evenly and avoid dark and light spots, periodically move items to expose the entire surface to an even amount of light so it may develop a uniform patina.
For normal household use only. Not recommended for commercial use.
Remove items before you move this unit.
This assembly requires two people.
3820DUETa
Addison Cal-King Platform Bed
This item has a total maximum combined weight limit of
850 lbs. inclusive of foundation and people. An optional center foot assembly is included to increase the limit to approximately 1,200 lbs.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.
Thank you for allowing us to help you furnish your home. We are certain you will be delighted with your new furniture for many years to come.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde, which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time) .
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-6533336 • Outside the U.S.: 541-687-0213
Fax: 541-6872060• Email: [email protected]
P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 04/19
3816DUETa Addison Queen Platform Bed
3818DUETa Addison King Platform Bed
3820DUETa Addison Cal-King Platform Bed
Parts List
Please note this Assembly Instruction is for all three beds. Please identify the bed part number when ordering parts.
Please identify the parts and check that the quantities received match those on this list. If you need to replace a part, refer to the model number, part letter and name.
3802DUETa Addison Queen Platform Kit (x1)
3806DUETa Addison King Platform Kit (x1)
3809DUETa Addison Cal-King Platform Kit (x1)
Part Description Quantity
Ja End Platform Assembly
O
P
Ka
L
M
N
Headboard Platform Assembly
#8 x 1-1/8" Lo-Profile Screw (inserted)
#8 x 1-3/4" Pan Head Screw (inserted)
#8 x 1-5/8" Black Screw (inserted)
1/4" T-Nut (inserted)
Wood Dowel (inserted)
1
1
12
12
33
48
2
3816DUETa_3818DUETa_3820DUETa — Page 2 — 04/19
T
U
Q
R
S
B
D
E
3816DUETa Addison Queen Platform Bed
3818DUETa Addison King Platform Bed
3820DUETa Addison Cal-King Platform Bed
Parts List
3803DUETa
Part
Addison Queen/King/Cal-King Platform Connector Kit (x1)
Description Quantity
18mm Flat Washer
1/4" x 22mm Hex Bolt
1/4" x 35mm Hex Bolt
44
24
20
Foot Assembly
#6 x 3/4" Brass Flat Head Screw (Inserted)
Wool Felt Pad/Glide (Attached)
Metal Foot Bracket (Attached)
1500mm Channel
4
24
5
4
4
V
W
X
Part
N
P
Y
ZA
ZB
Center Foot Assembly 1
#8 x 1-1/4" Black Screw (inserted) 4
#8 x 2" Black Screw (inserted)
3817DUET Addison Queen Platform Filler Strip (x1)
3819DUET Addison King Platform Filler Strip (x1)
3821DUET Addison Cal-King Platform Filler Strip (x1)
Description
5
Quantity
#8 x 1-5/8" Black Screw
Wood Dowel
7
2
Filler Strip
Cleat
#10 x 2" Pan Head Screw
1
2
2
3816DUETa_3818DUETa_3820DUETa — Page 3 — 04/19
3816DUETa Addison Queen Platform Bed
3818DUETa Addison King Platform Bed
3820DUETa Addison Cal-King Platform Bed
Assembly Instructions
This assembly requires two people.
Tools Required: Phillips screwdriver, 7/16" open end or box end wrench and rubber mallet.
NOTE: Remove this instruction from the Filler Strip Kit carton. Place Filler Strip and hardware kits to the side to allow space for assembling the platform portion of the bed. Open the #3803 Platform
Connector Kit, which attaches the two Platforms together.
1. Open and unfold the Platform Kit carton in the approximate location where the bed will be placed. This will help protect the flooring and the faces of the platform components. Place the
Headboard Platform Assembly (Ka) face down in the approximate location where the headboard will be located with the inside edge facing the End Platform Assembly (Ja). Align the Dowels (P) in the edge of the Headboard Platform Assembly (Ka) with the holes in the edge of the End
Platform Assembly (Ja) see Figures 1 and 1a.
Unfolded
Platform carton
Ka
Ja
Fig. 1a
Fig. 1
P
3816DUETa_3818DUETa_3820DUETa — Page 4 — 04/19
3816DUETa Addison Queen Platform Bed
3818DUETa Addison King Platform Bed
3820DUETa Addison Cal-King Platform Bed
Assembly Instructions
This assembly requires two people.
2. Slide the two sections together so that the flat edges touch as shown in Figure 2. Using the hardware from the #3803 Connector Kit, place the 1500mm Channels (U) on the Platform and align over the predrilled holes in the platform. Attach the Channels (U) with 1/4" X 22mm Hex
Bolts (D) and 18mm Flat Washers (B). See Figures 2 and 2a.
Hardware bag step 2
B
D x 24 x 24
U
D B
U
Fig. 2a
Fig. 2
3816DUETa_3818DUETa_3820DUETa — Page 5 — 04/19
3816DUETa Addison Queen Platform Bed
3818DUETa Addison King Platform Bed
3820DUETa Addison Cal-King Platform Bed
Assembly Instructions
This assembly requires two people.
3. Place the Foot Assemblies (Q) onto the Platform Assembly so that the holes in the metal brackets align over the predrilled holes. The legs should angle outward toward the corner of the platform. Attach the Foot Assemblies (Q) with 1/4" X 35mm Hex Bolts (E) and 18mm Flat washers (B). See Figures 3 and 3a.
Hardware bag step 3
B
E x 16 x 16
Fig. 3a
E
B
Q
Fig. 3
3816DUETa_3818DUETa_3820DUETa — Page 6 — 04/19
3816DUETa Addison Queen Platform Bed
3818DUETa Addison King Platform Bed
3820DUETa Addison Cal-King Platform Bed
Assembly Instructions
This assembly requires two people.
4. The attachment of the Center Foot Assembly (V) is optional if there is no need for extra support beyond the 850 lbs. weight limit. The addition of the foot will reduce the flex built into the design of the bed and provide more support. To attach the Center Foot Assembly (V) align the block over the four holes in the Headboard Platform Assembly (Ka). Attach with 1/4" X 35mm Hex
Bolts (E) and 18mm Flat washers (B). See Figures 4 and 4a.
Hardware bag step 4
B
E x 4 x 4
Fig. 4a
E
B
V
Fig. 4
3816DUETa_3818DUETa_3820DUETa — Page 7 — 04/19
3816DUETa Addison Queen Platform Bed
3818DUETa Addison King Platform Bed
3820DUETa Addison Cal-King Platform Bed
Assembly Instructions
This assembly requires two people.
5. Place two Wooden Dowels (P) into the Filler Strip (Y). Gently hammer in the dowels so that they are entirely seated in the wood. Insert the dowels of the Filler Strip assembly (Y) into the dowel holes of the Headboard Platform Assembly (Ka). See Figures 5, 5a and 5b.
Hardware bag steps 5, 6, 7
P x 2
P Fig. 5a
N
ZB
ZA x 7 x 2 x 2
Y
Fig. 5
Fig. 5b
Y
3816DUETa_3818DUETa_3820DUETa — Page 8 — 04/19
3816DUETa Addison Queen Platform Bed
3818DUETa Addison King Platform Bed
3820DUETa Addison Cal-King Platform Bed
Assembly Instructions
This assembly requires two people.
6. Attach the Filler Strip (Y) to the Headboard Platform Assembly with five 1-5/8" Black Screws (N) screwed into the pre-drilled holes. See Figures 6 and 6a.
N x 5
Fig. 6
N
Fig. 6a
3816DUETa_3818DUETa_3820DUETa — Page 9 — 04/19
3816DUETa Addison Queen Platform Bed
3818DUETa Addison King Platform Bed
3820DUETa Addison Cal-King Platform Bed
Assembly Instructions
This assembly requires two people.
7. Place the Cleat (ZA) onto the filler strip assembly, aligning with the pre-drilled holes. Secure each cleat with one 1-5/8" Black Screw (N) placed into the top of the cleat and one 2" Pan Head
Screw (ZB) screwed into the pre-drilled hole on the side of each cleat. See Figures 7 and 7a.
N
ZB
ZA x 2 x 2 x 2
Fig. 7
N
ZA
ZB
Fig. 7a
3816DUETa_3818DUETa_3820DUETa — Page 10 — 04/19
3816DUETa Addison Queen Platform Bed
3818DUETa Addison King Platform Bed
3820DUETa Addison Cal-King Platform Bed
Assembly Instructions
This assembly requires two people.
8. CAUTION NEEDED: Flip the Platform Assembly over onto the feet. Use extreme care not to bump into light fixtures, ceiling fans, walls, ceiling, or other objects in the room. Protect the corners of the Platform. Do not apply force to the Foot Assemblies (Q). Carefully slide the
Platform carton out from beneath the Platform Assembly and recycle or discard. See Figure 8.
Fig. 8
3816DUETa_3818DUETa_3820DUETa — Page 11 — 04/19
advertisement