E-Image MAGIC PTZ User Manual

E-Image MAGIC PTZ is an innovative multi-axis 360° movement system with a remote controller on slider & 360° movement in pan & tilt & zoom separately. It can be taken action smoothly on any distance, speed, acceleration, and direction. With its wireless control system and 2.4G communication channel, you can control the movement of both the slider and PTZ.

PDF

Document

The official QR code

For more information, please visit the EIMAGE official website:

MAGIC PTZ

V1.1

2017 .

EIMAGE official QR code

Contact Information

NINGBO EIMAGE STUDIO EQUIPMENTCO.,LTD

Address: No.373 South Hangyong Rd, Luotuo Industry Zone, Zhenhai,

Ningbo, China. 315202

Tel:86-574-86590061,86-574-86590031

Fax:0574-86590078

E-mail: [email protected]

Website: www.eimagevideo.com

www.eimagevideo.com

Disclaimers And Warnings

Thanks for choosing EIMAGE MAGIC PTZ. Please make sure strictly observe according to this user manual.

Please read this manual and disclaimer carefully before using this product. By using this product, you hereby agree to this disclaimer and signify that you have read it fully. You agree that you are responsible for your own conduct and any content created while using this product, and for any consequences thereof. You agree to use this productonly for purposes that are proper and in accordance with EIMAGE regulations, terms and any applicable policies and guidelines.

Do not modify or adjust the PTZ. As EIMAGE has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed or accepted for any resulting damageor injury. By the using, setting up, or assembling of the product, the user accepts all resulting liability. EIMAGE assumes no liability for damages or injuries incurred directly or indirectly from the use of this product.

There is a special page for Magic PTZ on Eimage offcial website:www.eimagevideo.com. Please check if your user manual is the newest one,if not, please download and use the the newest one.

This user manual if there is any updates without prior notice!

If you have any questions when you assembling the PTZ, please ask help from the authorized agent

of EIMAGE.

All names of products, brands, etc., appearing in this manual are trademarks or registered trade marks of their respective owner companies. This product and manual are copyrighted by EIMAGE, with all rights reserved. No part of this product or manual shall be reproduced in any form without the prior written consent or authorization of EIMAGE.

EIMAGE Power Using And Safety Precautions:

1. Please do not bare the equipment in the rain or be affected with damp, to avoid fire, electric shock

accidents.

2. Do not close to the high magnetic field, medical, aircraft and other equipment, to avoid any interfere.

3.The power supply voltage need with in 12v and 24v, it might damage the equipment higher than 24v, or

the equipment can not work properly less than 12 v.

4. It will cause Equipment failure when using it in sand ,dust and rain .

5. Don't change the emission frequency, and never use an external antenna or use other antenna.

6. Please use the voltage between 12 and 24 V, with a "V" lock batteries or use the power adapter

connected to the household power ,please guarantee the power is enough before using when

the power is low, please recharge in time, if cut off the power in the work, it might damage the

equipment and the camera.

7. Do not put hands in PTZ during working , in order to avoid any damage.

8. Never disassemble the equipment privately, use it roughly and knock the product.

9. Please make sure all parts are locked before power on.

10..Please adjust the center of gravity of camera before power on.

Download And Install The EIMAGE APP

For Apple Users

Search for " EIMAGE" on the APP Store and then follow the instructions for iOS installation.

For Android users

Search for " EIMAGE" on the Google Play and then follow the instructions for Android installation.

IOS 7.0 or above Android 2.0 or above

Disclaimers And Warnings

EIMAGE Power Using And Safety Precautions

Download E-image App

Shown with the safety box

Introduction

In The Box

EIMAGE PTZ Diagram

Ptz Main Part

Wireless Remote Shutter

Assemble Notes

Assemble(for Tripod As Example)

Download And Install Eimage App

EIMAGE PTZ App

Trace Record Diagram

Motus Diagram

Time-lapse

Stop-motion Diagram

Config

Professional Vocabulary Explanation

The Main Function Of E-image App

Attention

A-b Trace

Trace Mouts

Time-lapse

Stop-motion

EIMAGE Controller Diagram

Controller Main Body

Connect EIMAGE App To Controller

Connect Controller To PTZ / Motor

Import Notes Of Controller

EIMAGE Controller

Home Page

Joystick

Rec

Motus

Timelapse

Stopmotion

Setting

Wireless Shutter Channel Settings

Maintenance

Warranty And Support

Troubleshooting

Specifications

08-11

12-13

14-15

18-19

25-30

Shown With The Safety Box

Introduction

Innovative multi-axis 360° movement system with remote controller on slider & 360° movement in pan & tilt &zoom separtely. It can be taken action smoothly on any distance, speed,acceleration and dirention.

In The Box

PTZ main part x1 Controller x1

Antenna x2 USB charger cable x1

Receive the APP or the joystick signal.

Wireless Shutter x1

Standard USB charger for controller.

Cable release x1

It built in E-IMAGE motors for Pan and tilt drive modules, an independent IMU module, a 32-bit

DSP processor power supply module, a bluetooth module, a wirless module and a power breakout box.

Standard Lens Motor x1

W i r l e s s c o n t r o l s y s t e m , w i t h 2 . 4 G

communication channel. Control the

movement both for slider and PTZ.

15/19mm rods for zoom x2

Receive the 2.4 G order,and then control camera shutter by cabels,and complete the whole process.

Power cable x1

Transfer the instructions from wireless shutter to camera.

Power adapter x1

Built in motor for zoom control, with standard gear to drive the movment of zoom.

Zoom Cable x1

Stand rod with 15mm or 19mm dia, for attaching zoom and others.

Focus gear ring x3

Connect battery and PTZ.

Safety box x1

Connect zoom and PTZ , with Lemo connector.

A set,total 3 rings with different size (62/72/82mm) , to fit different lens.

For protecting whole set motor, and to achieve convenient transportation.

110-240V .

Extra accessories

Bowl locking for hang-up x1

(such as in jib arm)

Allen Wrench x 1

E-IMAGE MAGIC PTZ Diagram

1 2 3

1 Zoom cable

2 Power cable

3 Pan motor cable

1 PTZ Main Body

1. PTZ part

2. Athenna

3. Tilt motor

4. Power on/off button

5. Plug holes

6. Wireless shutter

7. Cable release

8. Focus gear ring

2 Wireless Shutter

9 .

Zoom Cable

10. Zoom motor

11. Quick release plate

12.15mm/19mm rods

13.

V-lock Battery( not included )

14.

Power cable

15.

Pan motor

16. Base locking part

Wireless Shutter

Assemble Notes

1.Please make sure the power is off before finishing installation (power cable is dis-connected).

2.Before locking the plate , please make sure the the plate is inserted in right position, and the

insurance lock is locked.

3.Adjust balance:

(1)Please make sure the camera is fixed tightly.

(2)Please loosen the screws a few turns to allow the tubes to slider. Do not loosen them excessively,

in order to avoid any damage.

(3)Please make sure the power cable is dis-connected to battery. Because if only press down

the power button, the motor is still on lock condition and will influence the balance adjustment.

4.If any screw is loosed during installation, please make sure to tighten it finally.

5.Before using, please make sure all locks should be locked tightly.

6.If zoom is used, please make sure the gear of zoom against the focus ring tightly.

7 .

Please choose correct shutter release according to your camera when do time-lapse,stop-motion.

Assemble(For tripod as example)

1 Install the PTZ part on tripod with flat base or slider with standard 3/8" screw, then fix it.

2 Move the whole base part to near the battery,by loosing bottom 4 screws, in order to save more room for the balance adjustment of camera. Then tighten them.

8 Adjust the camera gravity in back&forth

9 Balancing the vertical tilt

To adjust the vertical balance,you will need to change the camera's vertical position.

A

3 Move the plate part by loosening two screws , until the center align with the center of bottom circle, see

the picture.

B

8 1 : As picture showed, to adjust the center of gravity

of camera in back& forth.

A: by adjusting the base(back & forth)

B: by adjusting the camera plate( back & forth)

9 1 : Loose the two screws of vertical tubes,slide

two crossbars forwards or backwards until

adjust it to appropriate location, like picture.

4 Attach the camera mouting plate to your camera using the provided correct camera screws. Secure the camera tightly. Then insert the plate into plate base, and tighten the locking screw.

5 Attach the 15mm/19mm rod to the hole, and adjust it to appropriate location, then tighten the locking screw.

8 2 : As picture showed, to adjust the center of gravity

of camera in back& forth.

9 2 : Tighten the screws, rotate the tilt axis and make

the camera rotate to any tilt angle with lens up

forward (between +45°- -45° ）, if it can stopped,

means the vertical balance is achieved. like picture.

6 Attach the Zoom motor to the rod, adjust it to appropriate location. Attach proper gear ring to the camera and lock it, then push the motor gear against the camera’s.

7 F or time lapse & Stop-motion,please a ttach the wireless shutter to the camera and connect then with right cable release.

10 Balance

11 Connect the cable of zoom to zoom and main part, like picture.

12 Install the battery with v-mount lock until lock it. Connect the power cable.

13 Install the anthenna

14 Finish

Download And Install Eimage App

Android users

Search for " EIMAGE" on the Google Play and then follow the instructions for Android

installation

2.Turn on Bluetooth and search the "EIMAGE "and "Pair" with it.

3.Open the EIMAGE APP, click"Device" or Menu tab, there is "connect",then click it.

Bluetooth

Turn on or turn off

Turn on Blurtooth

Visibility

Visible to all nearby Bluetooth devices(01:45)

Bluetooth pairing request

To pair with:

EIMAGE SLDER

Make sure the decice is showing this passkey:

749012

Cancel pair

Silder3

Available decices

EIMAGE SLDER

Pairing...

4.There are many devices, please find "EIMAGE PTZ” and click it.

5.After successful connection, in the upper right,there will show"connect to EIMAGE PTZ". connect to EIMAGE PTZ

Selec device

Paried devices

EIMAGE SLIDER

EIMAGE PTZ

EIMAGE CONTROLLER

Menu tab

4 5

Note1:Some android phones will appear two names, please select the one with the phone

logo or don't choose the one with "?".

IOS 7.0 or above eimage 1 个结果

E - I M A G E

EIMAGE 电控滑轨控制器

深圳疤痕网络信息有限公司

打开

Blackmoco Fail Reconnect

Route

Frame

Exposure 1

A-B Rec

300

Reset ＆ Init

Sec

300

Pre Shoot Next

Blackmoco Fail Reconnect

Route

Route ID

Duration

A-B

Acceleration 10

Rec

1 2 3 4

Sec

Initialize Start Srop iOS 7.0

以上

2. Open the Bluetooth of your mobile device, switch on the power, click the EIMAGE APP,click

the “EIMAGE PTZ”then connect it.

Please click " " if you can't find the PTZ.

Visit website E IMAGE

E-image PTZ-S3 i

Welcome to use E-IMAGE slider

Mouts

EIMAGE APP

Define

Navigator area

Control area

Center circle - White Circle: on behalf of Joystick.

Center position Black Circle: movement range far away from center position, the speed will be faster.

Loose finger, the center circle could be return to center position automatically.

Pan– control movement of PTZ in Horizontal direction

Tilt – control movement of PTZ in tilt direction

Zoom – control camera lens zoom

Limit A-B

Safety of movement

The camera will stop automatically when it run to switch A or B position, avoiding any bump, for safety insurance.

Begin A -set beginning point A

End B

-set the Ending point B

Set AB point as the moving trace.

A-B Trace

2 Route - A - B: trace from Begin A to End B. Please set the

A-B route in Define interface.

REC: trace record. It is only can be created by wireless remote controller.Max.5pcs

Following options will appear when click the REC

Route

Route ID

Time: set the rough shooting time from A to B.

Acceleration

: Let the camera back to the Begin point A

: make the camera move to End B according to your

set time and acceleration

stop : Stop movement

: Repeat movement between AB

Quick action to create your request trace / take extra more videos or pictures after last trace is finished.

Slider:distance be moved on Slider

Pan:degrees be moved in Pan direction

Tilt:degrees be moved in tilt direction

Zoom:length be moved in Zoom

: Confirm above change

: Let the camera back to the start point

Preview

: Preview the movement

Time-lapse

Please refer to Motus " interface

Picture quantity that you want to shoot

The camera ' s exposure time

End time of time lapse

Spacing proportion

Waiting time before exposure

Movement time

Init.

: Let the camera back to the Begin point A

submit

stop

: Make the camera take pictures according to set

parameters

: Stop movement

Monitor : Check shooting process

The picture quantity you want to take

The camera ' s exposure time

set parameters

Used to set the max.speed of PTZ in every directions

Used to set the max.acceleration of PTZ in every directions

Used to adjust every directions of movement of camera if control by Controller's Joystick, same direction or against direction

Used to adjust every directions of movement of camera if control by APP, same direction or

Joystick stop range

Joystick acceleration

Make the camera stop suddenly or smoothly when Joystick stops, bigger number means more quick.

Set the 2.4G channel No.

PS: If you want to use controller to control PTZ or PTZ & Slider, please make sure to set the channel no. the same. Such as all in "2".

Motor segmentation parameters

Set the speed and sound of the motor.

8------ fastest speed ,

64-----slowest speed.

Professional Vocabulary Explanation

Limit setting

Limit AB is safety moving distance that you set.

Slider: the max. moving distance from one side to other side.

Pan: the max. angle of camera rotates left or right

Tilt: the max. angle of camera rotate up and down

Zoom: the longest zoom length

Note: 1. Befor any operation please set “Limt A&B”at fist.

It will be effective only when Limit A & Limit B are all set.

2. Previous limit set will be failed if PTZ is restarted. Please reset it.

3. When Limit A & Limit B are all set, the character of direction that you set will change

the color from black to red, which means limit setting is successful,to avoid any accident

during mis- operation.

4. The LIMIT A and LIMIT B can be set separately.

Begin A - B = Route A - B

Begin point A and end point B represent the shooting start time and end time,(After setting, the character

“Begin point A” and “End point B” will change the color from black to red.

The set of Begin point A and end point B is effective for all current equipments synchronously.

A-B : Simple A-B trace, just need to set the Beginning A and Ending B.

Rec-Trace record

Rec : Trace records, it only could be recorded by Controller. Max. 5pcs trace, and max. time of each trace is 20s.

Lower acceleration number means the response action of motor is gentle, for example, if the joystick back to the central point (means stop), the response action of motor is reduce speed slowly until stop.

If acceleration number is max., the response action of motor is stopped immediately without any cushioning. Acceleration number of each direction could be set separately.

When camera is under M mode,the APP exposure time should be longer than the camera exposure time. For example, camera exposure time is 1/100 s, at this time the App exposure time should be equal or longer than 1/80 s. When camera is under B mode, the real exposure time is decided by

APP, now, there is no special requirement for App exposure time.

Interval Rate

Interval Rate: used to set the interval between exposure and movement

Track: Previous set trace from A to B

Time- lapse working principle is as below

Motor move 1

unit distance

The motor stop

- waiting for the exposure

- wait for Y seconds

After exposure

One unit cyclic: take an example of shooting 1 picture

- waiting for motor running

- Wait for W seconds

Begin to expose

- expose Z seconds

- End expose

Joystick stop time

1 2 3 4 5

2.4G Channel

The Main Functions Of EIMAGE App

Please pay attention to the following notes before formal operation:

1. Before power on, please make sure to adjust the camera in good balance in every directions.

2. If the camera need to be rotated in tilt direction,please make sure the lens will not against the

bottom base tube.

3. Please make sure your battery is with enough power before using.

4. Please make sure all cables are connected correctly.

5. Open the bluetooth of mobile device,run software "E-IMAGE APP",switch on the power of MAGIC

PTZ.

6. Connect the APP with your MAGIC PTZ.

Note: During first using, first, please pair up “Magic PTZ “with your bluetooth options.

APP will ask to open the bluetooth of mobile device automatically when it is enabled,please

click “YES”.

1 .

In the define interface, please select “Pan/Tilt/Zoom” channel separately, to control the movement of PTZ .

Slider Pan Tilt Zoom

2 .

Touch joystick , to control the camera move to your

request beginning point hen click the ” “

the color of " " will change color from black to

red.

3 .

Touch the joystick again , to control the camera move to your request ending point , t

Set B the color of

Set B will red .

AB trace is finished .

change color from black to

Note 1: if you want to do trace records, please use the CONTROLLER (optional) to do it.

1 .

In the Define interface, please set A-B trace at first.

For REC( trace record), please use controller to make it.

2 .Click to set the time and acceleration.

Time factor

Acceleration

OR REC:choose the trace ID that you want to run,

and then set time and acceleration.

3 .

Click " " after camera back to Begin A, then

4 .

If you want to show the movement repeatly, please

Note 1: Rec-trace records only can be finished by wireless remote CONTROLLER(optional).

Please choose trace number on your APP to continue your following operations

1 .

Please refer to “Motus”Page

2 .

In time-lapse interface, please set the shooting number,

exposure time,end date and time, the percentage of

the waiting time and movement time.

No need to be set. System will be changed automatically.

3 .

Click the

Init.

,let the camera move back to the

beginning point A , and then click submit , make

the camera shoot according to the parameters that

you set up.

4 .

monitor

Click

stop

, you could cancel the current operation.

Target mode

Slider : please input the number of extra length, or click + /-

to adjust it.

Pan: please input the number of extra degree, or click + /-

to adjust it.

Tilt: please input the number of extra degree, or click + /- to

adjust it.

Zoom: please input the number of extra length, or click + /- to

adjust it.

Set

: Let the camera back to the Begin point A

Init.

Preview

: make the camera take pictures according to set

: stop movement of camera

Note 1: At first, please make sure the shutter and cable is connected correctly.

Second, please make sure the channel of shutter is same as motor, PTZ.

Note 2: Rec-trace records only can be finished by wireless remote CONTROLLER(optional).

Please choose trace number on your APP to continue your following operations

Note 3: APP exposure time set should follow the following rules:

1 When camera is under M mode, the APP exposure time should be longer than the camera exposure time. For example, camera exposure time is 1/100 s, at this time the App exposure time should be equal or longer than 1/80 s.

2 When camera is under B mode, the real exposure time is decided by APP, now,there is no special requirement for App exposure time.

E-IMAGE Controller Diagram

1 .

In the Define interface, please set A-B trace at first.

2 .In the Stop-Motion interface, please set the photo

quantity you want to take and exposure time.

3 .

Click the " " , following interface will appear.

Stop-Motion

Init .

1 Positioning

Pre

30 /300 shoot Next

4 .

Click the " Init.

" , let the camera move back to the

beginning point A.

5 . After adjustment of shot scenes and character’ sactions,

red, it means this picture is finished. If white, it means next

shooting.

Stop-Motion

Init .

1 Positioning

Pre

30 /300 shoot Next

Note 1: At first, please make sure the shutter and cable is connected correctly.

Second, please make sure the channel of shutter is same as motor, PTZ.

Note 2: In the shooting process, if you find there are some photos are not satisfied, you

could input the picture number, then click "Positioning", the camera will move

to that picture position automatically, then re-shoot it.

Note 3: APP exposure time set should follow the following rules:

2 When camera is under B mode, the real exposure time is decided by APP, now,there is no special requirement for App exposure time.

1 controller Main Body

1. Dia wheel: change parameters

2. Left joystick:

Left/right-control the movement of slider

Up/down-control the Zoom movement of PTZ

3. Antenna

4. LED screen

5. Right joystick

Left/right-control the pan movement of PTZ

Up/down-control the tilt movement of PTZ

6. Power

7. Neck strap hole

8. USB charger hole

9.1/4" standard hole

45 % :Battery power

2. Connect E-IMAGE APP To Controller

Please refere to PTZ, same operations, just search " Controller" in device list , then connect it.

at same time,but just in one device.

3.Connect Controller To PTZ/Motor

Please set the channel no. of Motor & PTZ & Controller the same.

For factory setting, they are all in 2. If different, please adjust it as following:

1.For Controller, please check the channel No. in Setting interface:

2.4G Channel

2.For PTZ or Motor, please check the channel No. in Config /Setting interface.

4. Important Notes Of Controller:

1.Before using, please make sure to adjust the 2.4G channel of PTZ ,MOTOR and Controller in same

one.

2.Please make sure antenna is installed and battery is full.

3.Please noted that if you want to use APP to control devices, Controller should NOT stay at " "

or " " page, Otherwise App will be conflicted with Controller.

Joystick

Setting

4. For more detail adjustment of parameters, we recommend to change it by APP.

5. We suggest to keep the Controller off when charge the battery.

6. Please noted there is SAFETY PROTECION in PTZ:

if battery power is still connected, it means the PTZ is still under working, and every axis is still

under lock position. In order to avoid camera be damaged because of suddenly falling if not in

balance, after you switch off the power. If battery power is not connected, it means the PTZ is not

working.

EIMAGE CONTROLLER

Home page

Joystick

CH : 2 45 %

Joystick Rec Motus

CH : 2 45 %

Variable Constant Setting

TimeLapse StopMotion Setting

Click the there are 3 options: Variable/ Constant /Setting

Joystick

Slider

Zoom setA

100%

100% setB

CH : 2

Pan

Tilt

45 %

100%

100% limitA limitB

Rail

Pan

CH : 2 constant speed

100 Tilt

100 Zoom

45 %

100

Rail

Pan

CH : 2

Joystick direction

B Tilt F

F B Zoom F

45 %

CH : 2 45 %

Joystick

Rec Motus

TimeLapse StopMotion Setting

Joystick :control movement

Rec : trace record

Motus : play movement of AB trace or recorded trace

Timelapse : make timelapse

Stopmotion : make stop-motion

Setting : set up parameters

: means the speed will be changed according to your joystick's movement.

In the page, AB trace could be setted.

Variable

a: Operation of set Limit A-B and A-B route

Set Limit A-B

Set the max. distance of movement for safety using.

Please make the equipment move to your request start point, click " Limit A"

Same operation to set “Limit B”

Limit A-B is finished b: Set A-B trace

Please make the equipment move to your request start point, click " Set

Same operation to set “Set B”

A-B trace is finished

2 : In the page, it means the speed of every directions is fixed.

Constant

Operation of adjusting speed: a : Big step: please press down the right joystick, meanwhile, dial orange wheel, the speed will changes on

multiple as 100.

b : Small step: only dia the orange wheel.

Note 1: If you want to control the PTZ/Motor in fixed speed, it is better to use this function.

3 : Adjust directions of movements.

Setting

26 25

Rec

Click ,here is the page:

Rec

CH : 2 45 %

Joystick Rec Motus

TraceID 0 startTec init

1 2 endRec play

CH : 2

3 4

45 %

20 s stop

TimeLapse StopMotion Setting

Trace ID : ID number of each trace.Total max. 5 traces.

Start Rec : the start of record.

End Rec : the end of record.

20s : current shooting length, from 0-20s.

init : play

Stop

: let the equipment back to start point

: start shooting stop shooting

Operation of Rec

Please click Trace ID at first, such as "0", then click " start Rec", please use the controller to control movement for the trace that you want, then click "end Rec".

Note 1: please remember to click "stop" no matter stop in it in the middle play or after whole play.

Motus

Click , here is the page:

Motus

CH : 2 45 %

Joystick Rec Motus

Trace

Time

Accel

A-B

TraceID 0

Rec

Sec

1 2

CH : 2 init start stop

45 %

3 4

TimeLapse StopMotion Setting

A-B : AB trace record (it is made in Variable page)

Rec : recorded trace

Time : set rough shooting time

Accel : Acceleration

Trace ID : ID number of each trace.

Please choose the one you would like to play.

init: let the equipment back to Start point play: start shooting

Stop: stop shooting

Operation of Motus

Selection the trace that you want to run, such as A-B . If trace record, please choose the trace ID at first, set the "Time" & "Accel", then click "init", let camera back to Begin point, click "start", the camera will move.

Timelapse

1 Click , here is the page 1:

TimeLapse

CH : 2 45 %

Joystick

Rec Motus

TimeLapse StopMotion Setting

Trace A-B : A-B trace. Please set it in "Variable" page.

Trace Rec : Recorded trace. Please set it in "Rec" page

Trace ID : ID number of trace.Please choose the one

you would like to play.

Trace A-B

TraceID 0

Rec

1 2

Time 1000 Sec

Photos 300 P

Return

Time :shooting time

Photos:

photo quantity you want to take

2 Click ,here is the page2:

CH : 2 45 %

Trace A-B

TraceID 0

Rec

1 2

Time 1000 Sec

Photos 300 P

Return

EXP: exposure time

Before: waiting time before exposure

After: waiting time after exposure

EXP

Before 500

After

300

500 miliSec miliSec miliSec

CH : 2 init

45 % start stop

Init: let the equipment back to begin point

Start: make shooting

Stop: stop movement

Operation of Timelapse

Selection the trace that you want to run, such as A-B . If trace record, please choose the trace ID at first, set all parameters, then click "init", let camera back to Begin point, click "start", the camera will take pictures according to set parameters.

Note 1: APP exposure time set should follow the following rules:

2 When camera is under B mode, the real exposure time is decided by APP, now,there is no special requirement for App exposure time.

Note2: Please make sure to adjust the channel of wireless shutter to the same as PTZ.

Then it can receive order and take pictures.

Stopmotion

Click , here is the page:

StopMotion

Before using, please set A-B trace in Variable page at first.

CH : 2 45 %

Joystick

Rec Motus

Photos 300 P

CH : 2 45 %

EXP 300 miliSec init

Shoot goto

TimeLapse StopMotion Setting

Photos: photo quantity you want to take

EXP: exposure time init: let the whole system back to begin point

1 : the 1st picture. Picture quantity you have take

the equipment will move to that position automatically ,then re-shoot it.

Operation of Stopmotion

For this function, only A-B trace can be used. Please set " photos" and " EXP", then click "shoot", then click

"next". The camera will take pictures according to set parameters.

Note 1: APP exposure time set should follow the following rules:

When camera is under M mode, the APP exposure time should be longer than the camera

2 exposure time. For example, camera exposure time is 1/100 s, at this time the App exposure time should be equal or longer than 1/80 s.

When camera is under B mode, the real exposure time is decided by APP, now,there is no special requirement for App exposure time.

Note2: Please make sure to adjust the channel of wireless shutter to the same as PTZ.

Then it can receive order and take pictures.

Setting

Max speed : set the max. speed of each directions. Please click number box, then dia the orange wheel to change it, then click“OK”.

CH : 2 45 %

Joystick

Rec Motus

Rail

Pan

100

Max Speed Set

CH : 2

Tilt

Zoom

100

45 %

Return OK Next

TimeLapse StopMotion Setting

Max. Acceleration Set: set the max. acceleration of each directions. Please click number box, then dia the orange wheel to change it,then click”OK”.

CH : 2 45

Joystick

Rec Motus

Rail

Pan

100

Max Accelertion Set

CH : 2

Tilt

Zoom

100

45 %

TimeLapse StopMotion Setting

3 Language: Chinese or English

CH : 2 45 %

Return OK

CH : 2 45 %

Language

中文 English

Joystick

Rec Motus

Return Next

TimeLapse StopMotion Setting

4 2.4G channel: please set the channel of controller.

CH : 2 45 %

Joystick

Rec Motus

TimeLapse StopMotion Setting

2.4G Channel

CH : 2

45 %

Return

Wireless shutter channel settings

Maintenance

MAGIC PTZ is precision electronic equipment and is not waterproof. Keep it away from sand and dust when in use. After use, it is recommended that you wipe the PTZ with a soft dry cloth. Never spray any cleaning liquids on to the PTZ.

Warranty And Support

MAGIC PTZ enjoy 1 year of hardware warranty period. These service could be get from E-IMAGE official dealers or contact with E-IMAGE company directly.

Troubleshooting

No.

Problem Solution

The power light is on, but

PTZ can't work

( 1 ) Please check if the cables are connected correctly, please

re-connect it.

Big noise during working of zoom motor

( 1 ) The max. zoom is reached, and motor against the locking screw

of ring gear. Please sent limit A-B of zoom at first.

In tilt direction, the PTZ can't rotate a full 360° circle

( 1 ) The vertical balance is not achieved, please re-adjust it.

Controller can't control

PTZ or slider

( 1 ) The channel is not same, please change it to same one.

APP can’t control the equipment

( 1 ) Please check if the power of the device is on and the power

is enough.

( 2 ) Please check if the antenna is installed

( 3 ) Please check if the APP is connected with E-IMAGE PTZ or

Motor sucessfully. If failed many times, please re-start the PTZ

or Motor.

( 4 ) P lease check if there is other mobile devices has connected

to the equipment .

( 5 ) P lease check if operation channels(such as Slider, PAN,

tilt,etc.) is correct

Picture shakes unusually ( 1 ) The situation may be due to set the maximum speed value or

the maximum acceleration value too big, please lower the

parameters then can resume normal work.

No.

Problem Solution

Equipment can’t move forward in some point.

( 1 ) Please check if Limit AB is set.

Limit AB can’t be set up ( 1 ) Please check whether the device is restart, if restarted,

please set a new limit AB.

Wireless shutter is not lighted up when switched on

( 1 ) Please check whether battery is installed or installation

direction is right.

Wireless shutter could not respond

( 1 ) Please check whether the shutter release is loose or the

not plug in.

(2) Please restart.

(3) P l e a s e c h e c k w h e t h e r t h e w i r e l e s s s h u t t e r a n d A P P a r e

in the same channel.

If PTZ works too slowly even if App Joystick is in max.speed

( 1 ) Please re-set the "max-speed config " & " max.

Acceleration config " in CONGIG page, change it more

than original set or more than 100.

Specifications

Technical parameters

PTZ-S/PTZ-M

Pan

Tilt

Roll

Focus

Focal length

Movment

360 ° continuous

No-limit

Control mode

Motor Power

Radio Frequency

Wireless controller or App control

8-32W

2.4GHZ/Bluetooth

Max.Speed

60 °/ s

50mm / s

Min.Speed

0.01

°/ s

0.01

°/ s

0.01

°/ s

0 .

05mm / s

0 .

05mm / s

Positioning Accuracy

Volatage Range

Communication Distance

0.0025

DC14.8V-24V or power adapter

20m

Wireless Controller

Radio Frequency 2.4GHz

Built-in Rechargeable Lithium Battery

Net weight

Wirless Shuttter

0.42kg/0.9lbs

Radio Frequency

Battery

Net weight

2.4GHz

2*AA battery(LR6)

0.04kg/0.10lbs

Operating Voltage

Endurance time

Communication Distance

3.7V

50h

20m

Operating Voltage

Endurance time

Communication Distance

50h

20m

Product parameters

PTZ S

Product Size

Net weight ( PTZ S )

PTZ M

Product Size

Net weight ( PTZ M )

43.5x32x11cm

4.15kg

/ 9.15lbs

46.5x33x12cm

5.54kg

/ 12.21lbs

Max .

Pay Load 8kg / 17 .

6lbs

Working temperature 20 ℃40 ℃

Max .

Pay Load 15kg / 33lbs

Working temperature 20 ℃40 ℃

Standard packing

PTZ S

In the box

Packing weight

PTZ M

In the box

Packing weight

PTZ-S -1 set/Wirless controller -1 set/Wirelss shutter with cables -1 set

16.65kg

/ 36.71lbs

Box Dimensions 64.3x48.3x28cm

PTZ-M -1 set/Wirless controller -1 set/Wirelss shutter with cables -1 set

18.01kg

/ 39.71lbs

Box Dimensions 64.3x48.3x28cm

Hello! I am an AI chatbot specifically trained to assist you with the E-Image MAGIC PTZ User manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Assistant typing

Assistant is out of keyboard. Please, try again later.

The official QR code

For more information, please visit the EIMAGE official website:

MAGIC PTZ

Contact Information

NINGBO EIMAGE STUDIO EQUIPMENTCO.,LTD

Address: No.373 South Hangyong Rd, Luotuo Industry Zone, Zhenhai,

Ningbo, China. 315202

Tel:86-574-86590061,86-574-86590031

Fax:0574-86590078

E-mail: [email protected]

Website: www.eimagevideo.com

www.eimagevideo.com

Disclaimers And Warnings

EIMAGE Power Using And Safety Precautions:

Download And Install The EIMAGE APP

Contents

Shown With The Safety Box

Introduction

In The Box

PTZ main part x1 Controller x1

Antenna x2 USB charger cable x1

Wireless Shutter x1

Cable release x1

Standard Lens Motor x1

15/19mm rods for zoom x2

Power cable x1

Power adapter x1

Zoom Cable x1

Focus gear ring x3

Safety box x1

Extra accessories

E-IMAGE MAGIC PTZ Diagram

1

PTZ Main Body

2

Wireless Shutter

Assemble Notes

Assemble(For tripod as example)

A

B

Download And Install Eimage App

Android users

Mouts

EIMAGE APP

Define

Time-lapse

Professional Vocabulary Explanation

Limit setting

Begin A - B = Route A - B

Rec-Trace record

Interval Rate

Joystick stop time

2.4G Channel

The Main Functions Of EIMAGE App

E-IMAGE Controller Diagram

1

controller Main Body

2. Connect E-IMAGE APP To Controller

3.Connect Controller To PTZ/Motor

4. Important Notes Of Controller:

EIMAGE CONTROLLER

Home page

Joystick

Rec

Motus

Timelapse

Stopmotion

Setting

Wireless shutter channel settings

Maintenance

Warranty And Support

Troubleshooting

No.

Problem Solution

No.

Problem Solution

Specifications

Technical parameters

Product parameters

Standard packing