promate
|promate.net | URSS Lifestyle Technology/
Stereo Bluetooth™ Headset plus
Bluetooth™ Adapter
User Guide
|
Promate proHarmony.l+
Stereo Bluetooth™ Headset plus Bluetooth™ Adapter
User Guide
Introduction
proHarmony.1+ is a convenient wireless Hi-Fi headset that connects to your
| Bluetooth™ enabled mobile phone or audio device. Now you can enjoy listening /
| to your favorite music on the go or make and receive hands-free phone calls. |
ProHarmony.1+ also comes with a Bluetooth™ USB dongle so that you can
wirelessly connect your headset.
Specification
| |
Bluetooth™ : Version 2.1 Chipset CSR BC05
(plus EDR Enhanced Data Rate for USB adapter)
| Bluetooth™ profile: Headset, Hands free, A2DP, AVRCP |
| Effective range: 10m |
Working time: 10 hours
| Standby time: 250 hours /
| Charging time: 3 hours |
Input voltage: 5V DC
Radio frequency: 2.402 ~ 2.480 Mhz
| Transmit power: Class 2 (Max 2dBm) |
Battery type: Rechargeable Li-polymer 230mAh
OS Support (adapter): Windows 98/ME /2000/XP/ Vista/7/8
| Made from ABS plastic |
Specification
Bluetooth™ Hifi headset for wireless music and call streaming
e Mobile and Bluetooth™ device full compatibility function
e 10 Hours working time
* Wireless connection for hands free communication
* Automatic music pause and resume during incoming and outgoing calls
e Automatic connection with last used device
Built-in rechargeable Li-polymer battery feature
® USB Bluetooth”" adapter for wireless connectivity
e Bluetooth”" version 2.1 + EDR technology
* Connect up to 17 Bluetooth”" devices simultaneously
* Radio characteristic for data receiving and transmission
* Transfer videos, pictures, music and files
* Low power consumption for mobile usage
Packing Contents:
proHarmony.1+
Bluetooth™ adapter
USB charging cable
Warranty Card
User Manual
Getting Started
Retractable string
< key :last song
> key :next song
LED Indicator
Multifunction button (MFB): Turn on/off the headset, answer, end
and reject call, mute, voice dial and switch conversation, redial last
number, pause and revert music.
+ key: volume up
-key: volume down
Charging port
Built-in microphone
Operation Instructions:
Note:
Even though the paired device and headset support the same Bluetooth™
profiles, the functions may be different due to the specification difference
of the paired devices.
Charging
First time charging:
Before you use this Bluetooth™ proHarmony.1+, please charge the
battery of fully.
Second time and more:
When you hear a warning tone of “beep” every 20 seconds, at the same
time, the red light will start blinking. It means the battery is low and need
to be charged. There are two ways to charge:
Plug the travel charger into standard AC power outlet.
Connect the travel charger with the charging port of the headset.
When the red light is on, the headset is charging.
When the red light is off, the headset is charged full
It takes about 2.5 hours to charge the headset full.
Insert USB charging cable into USB outlet of PC.
Connect charging cable with the charging port of headset.
When the red light is on, the headset is charging.
When the red light is off, the headset is charged full.
Charging time of the USB charging cable: About 2.5Hrs.
Note:
Choosing Travel charger or USB cable depends on different countries or
areas and actual demands.
vw Warning:
v € 1.The battery is recycled.
ay 2. Do not dispose of the battery in fire, as it may cause explosion.
| How to use
| 1 Switching on / off headset
| Function Operation Indicator light Indication tune
Switch on Press the MFB for The blue light A “DI” tone
| 3-5 seconds, the blinks quickly 4
blue light blinks. atime.
Switch off Press the MFB for | The red light blinks A “DI” tone
| 3-5 seconds, the quickly 4
red light blinks. a time.
| Remark: proHarmony.1+ will switch off automatically if no device is
| connected after 5 minutes in order to save power.
| 2 Pairing with Bluetooth™ device
Function Operation Indicator light Indication tone
| Enter into pairing Make sure the headset is The red and Two tone “Du
| mode off. Or switch off the blue lights blink Du”
headset firstly. Press and alternately.
| hold the MFB for 5-7
seconds, and release the
| key till the red and blue
light blink alternately’
Note:
| The pairing mode will last for 2 minutes. If the headset still can’t pair with any
Bluetooth™ devices after 2 minutes, it will switch into standby mode
| automatically.
| 3 Pairing with Bluetooth™ mobile phone
| Please make sure your mobile phone has Bluetooth™ function that can be
used. Special pairing procedures may vary with different mobile phone.
Please refer to the manual of your mobile phone for further information.
| Steps as follows:
| a) Please keep the headset and mobile phone in the range of 1 meter
when pairing.
|]
| b) Make the headset enter into pairing mode.(Please refer to “how to
enter into pairing mode”)
| c) Start the Bluetooth™ function of mobile phone and search the
Bluetooth™ devices. After searched, select “proHarmony.1+” in the
| Bluetooth™ device list.
| d) Enter password according to indicated PIN No:”1234”, and press the
key of” Yes” or “confirmed”.
| e) After successful pairing, select “proHarmony.1+".in the Bluetooth™
| device list and press “connect”.
f) After successful connecting, the blue light of the headset blinks twice
every 4 seconds.
| Note:
* |fthe pairing is not successful, please switch off headset firstly, and then
| re-pair according to the step 1-6 mentioned above.
| * After pairing is successful, pairing devices will remember each other. Unless
pairing information is deleted because of new pairing, or no need to pair when
| use next time.
| * The headset will connect with the latest paired device. If you want to pair
with other Bluetooth™ devices, please switch off the Bluetooth™ function of
| the current Bluetooth™ device, and then pair and connect it with the new
Bluetooth™ device according to steps a-f mentioned above.
| 4 Pairing with Bluetooth™ transmitter
| You can enjoy music wirelessly through connecting headset with stereo
Bluetooth™ transmitter. Here, take iPod general Bluetooth™ transmitter
| for example. Pairing steps as follows: /
a) Keep the Bluetooth™ transmitter and headset in the range of 1 meter
| when pairing.
| b) Make the headset enter into pairing mode (refer to “How to enter into /
pairing mode)
| c) Turn on the Bluetooth™ transmitter and it will search Bluetooth™
| device
automatically and start pairing.
| d) When the headset request PIN No, the Bluetooth™ transmitter need to
respond “1234” automatically
Lo 000000
e) After successful pairing and connecting, the blue (or red) light of
headset blinks twice every 4 seconds.
Note:
1. The pairing password of proHarmony.1+ is “1234”, so the headset can’t pair
with the Bluetooth™ transmitter which pairing password is not “1234”.
2. If the pairing is still not successful after trying several times, please refer to
the manual of your Bluetooth™ transmitter carefully.
5 Pairing with BlueMate.3
You can pair the proHarmony.1+ together with the bundled BlueMate.3
USB adapter. With this, you can wirelessly stream music from your desktop
or laptop computer. You can utilize the complete USB adapter feature
together with the proHarmony.1+ with wireless music streaming, VOIP
communication by activating Bluetooth™ microphone output on Skype
during conversation, etc.
Note:
1. Upon installation of the BlueMate.3 driver and application software, go to
Bluetooth™ places and start searching for Bluetooth™ devices.
2. Once the proHarmony.1+ had been searched and recognized, double click
on it.
3. There will be 2 connections which can be made for the proHarmony.1+
which is Bluetooth™ Advanced Audio and Bluetooth™ Headset and
Microphone.
4. You may select and double click Bluetooth™ Advanced Audio for music
streaming function and Bluetooth™ Headset and Microphone for VOIP
function. For example using it with Skype for its added microphone feature.
6 Pairing with several Bluetooth™ devices
The headset can connect with two devices at most. One is the mobile
phone with HFP profile, another is the devices with A2DP profiles. If you
want to finish the pairing of several Bluetooth™ devices, please refer to
the following steps.
sepramate
EEE ifestyle Technology/
www.promate.net
3
|
4
Q: How far is the effective range between the headset and mobile phone?
A: According to the Bluetooth™ standard, the max. controllable range of
Class2 headset is 10 meters. It varies under different environment.
Q: Why my cell phone cannot search and find the headset?
A: The mobile phone will not find the headset if headset and mobile phone
are not under the pairing mode, Make sure the headset is under the
pairing mode and in the effective working range, and then the headset
can be paired and connected.
Q: Why | cannot hear the voice?
A: a) Make sure the headset has been switched on.
b) Make sure the volume is not too low or muted
c) Make sure the headset connects with the mobile phone correctly.
d) Make sure the distance between the headset and the cell phone is in
the normal working scope.
Q: Why is the voice not clear during conversation.
A: a) Make sure the mobile phone is in the strong signal area.
b) Make sure the headset is in the function range of this product.
Q: Why can’t control the function of pause, revert, control last song and
next song when playing music?
A: This function needs your Bluetooth™ device supports AVRCP.
Care and maintenance
Please read the following suggestions carefully, that will help you to fulfill any
warranty obligations and to enjoy this product for many years.
Keep dry and don’t put it in the dump place, in case of effecting the interior
circuit of product
Don’t put the product under the sunlight or place hot areas. High
temperature will short the life of electronic device, destroy the battery, or
distort certain plastic.
Don’t expose the product in the cold areas. This may damage the internal
circuit board.
Don’t try to take apart the product. It may damage the product if you are
not professional.
Don’t fall off on the floor or knock the hard substance, it may damage
interior circuit.
Don’t use intensified chemical or detergent to clean the product.
Don’t scrap the surface with sharp things
If the product can’t work normally, please sent it to the regularly asserted
store, the staff will help you to solve problem warmly.
FAQ's
1 Q: What does it mean when red indicator light is on ?
A: Battery is low, need to be recharged
2 Q: Whyis notthe red light bright when charging?
A: a) Please make sure the charging device connects with headset well.
b) You didn’t use the headset for a long time, the battery may dry up. At
this time, you have to charge the battery for 30 minutes, and then the
red light will be bright.
* When the volume of headset is adjusted to max or min, you will hear an
indication sound of “Ding-Dong”.
* Remote control the function of last song/next song/pause/revert, it
needs your mobile phone or Bluetooth™ transmitter supports AVRCP.
Please refer to the instruction of your mobile phone or Bluetooth™
transmitter for further information.
10 LED indications
LED indicator Status of headset
Red light is on Charging
Red light is off Finish charging
LED Indicator Status of headset
Red and blue light blink alternately
Pairing mode
Blue light (blue light will turn red ifl ow
power) blinks twice every 2 seconds.
Standby mode (paired, but not connected
with the Bluetooth™ device)
Blue light (blue light will turn red ifl ow
power,) blinks twice every 4 seconds
Standby mode (connected with the
Bluetooth™ device)
Blue light blinks (blue light will turn red as
low power,) 3 times every 2 seconds
Ringing
Red light (blue light will turn red if low
power) blinks 1 time every 2 seconds
Conversation mode
11 Tune Indications
Indication tune
Status of headset
Two tones every 5 seconds
Conversation mode and microphone
mute
A tone “DU” every 20 seconds
Low power
e When the volume is adjusted to max or min, you will hear a indication
sound of “Ding-Dong”.
® For some mobile phones, when you press the key of accepting on the
phone, the conversation will be sent to mobile phone. At this time, you can
switch the call to headset by using the conversation switch button or
through operating on the mobile phone. Please refer to the instruction of
your mobile phone for further information.
9 Playing music
When the headset connects with the mobile phone or Bluetooth™
transmitter which supports A2DP, you can enjoy music through headset,
wirelessly.
Function Status of headset Operation Indication
Volume up Playing music Short press or | nothing
long press + key
Volume down Playing music Short press or | nothing
long press - key
Pause Playing music Short press the | Ashorttone “du”
MFB
Revert Pause Short press the | Ashorttone “du”
MFB
Last song Playing music Short press < key A short tone “du”
Next song Playing music Short press> key A short tone “du”
Remark:
* For some of mobile phones, when they are playing music, the music will
transmit to the speaker of mobile phone, you have to choose “transmit the
sound through Bluetooth™ ” in the “setting” of music play interface, and
then choose “proHarmony.1+” in the device list, the music will be
transmitted to the headset. Please refer to the instruction of your mobile
phone for further information.
8 Making a call with the headset
long press - key
Function Status of headset Operation Indication
Voice dial Standby mode Press and hold | A short tone “DU”
“<” button for 2s
(last song),
release the key till
you hear an
indication sound
Redial last call Standby mode press the MFB | Ashorttone “DU”
twice
Turn up volume Conversation mode | Short press or | Nothing
long press + key
Turn down volume Conversation mode Short press or | Nothing
the MFB for 2s,
and release the
key till you hear
the indication
sound
Answer calling Ringing Short press the | A short tone “DU”
MFB
Reject calling Ringing Press and hold| A short tone “DU”
between headset
and cell phone
release the key till
you hear the
indication sound
End calling Conversation mode Short press the |A short tone “DI”
MFB
Switch Conversation mode Press and hold | А short tone “DU”
conversation the MFB for 2s,
Microphone mute
Conversation mode
Quickly press the
“Dy”” Du” tone
MFB twice every 5s
Cancel mute Conversation mute Quickly press the | Nothing
MFB twice
Remark:
se Not all the mobile phones support all the function listed above. Please
refer to the instruction of your mobile phone.
Firstly, pair the headset with Bluetooth™ transmitter
(refer to “pairing headset with Bluetooth™ transmitter).
Switch off the Bluetooth™ transmitter.
Pair and connect the headset with the Bluetooth™ mobile phone
(refer to “pairing headset with Bluetooth™ mobile phone”).
Restart the Bluetooth™ transmitter, then it will connect with the
headset automatically.
Note:
* After successful pairing with several Bluetooth™ devices, the paired devices
will remember each other. Unless paired information is deleted because of
new pairing, otherwise make mobile phone and headset and set up hands
free connection and restart the Bluetooth™ transmitter, then the connection
of several devices can be performed.
* For the mobile phone which supports the HSP and A2DP at the same time.
It may set up connection with HSP and A2DP simultaneously. At this time,
start Bluetooth™ transmitter may not connect with the headset again.
7 Wearing headset
The string of this headset is retractable; please adjust according to the
actual use. Logo “L” of headset represents left ear, Logo “R” of headset
represents right ear. Please wear the headset according to the indication of
the Logo.
">
