- Computers & electronics
- Audio & home theatre
- DVD players
- HELIOS
- NeoDigits Helios H4000
- User's manual
advertisement
HANTZ + PARTNER
The Upgrade Company! www.hantz.com
HELIOS H4000
HD Upscaling DVD Player
Users Manual
Digital Revolution. Your Way.
General Introduction
Thank you for purchasing your new Helios H4000 HD Upscaling DVD player.
The H4000 is integrated with the latest cutting edge video technology. The main feature of the player is to upscale standard DVD titles and MPEG4 files to high definition resolution. In addition, the H4000 offers a large selection of High Definition video modes and connection options.
The player supports the following video modes and connection outputs:
Component Video output:
480i / 480p / 576i / 720p / 1080i / 1080p
HDMI video output
480i / 480p / 576i / 720p / 1080i / 1080p
VGA/RGB-HV Output:
VGA (640 X 480) / SVGA (800 X 600) / XGA (1024 X 768) / SXGA (1280 X 1024) /
720P / 1080i
How will I benefit from the H4000s high definition video output?
If you own a HDTV (or any other high definition display device), you will only be able to play standard DVD titles to as high as 480p (NTSC progressive scan) or 576p
(PAL progressive scan) resolution video input. However, your HDTV actually has the capacity to show images much greater than 480p or 576p. Therefore, you are not getting the most out of your HDTVs resolution.
The H4000 upscaling DVD player allows you to upscale standard DVD titles as well as MPEG4 files to as high as 1080p resolution. With its range of resolution options, you are able to select from a large number of resolutions in order to that right match with your HDTVs native resolution. The result is a noticeably sharper and clearer image on the screen.
Table of Contents
General:
Safety Precautions
Player Features
Package Contents
Supported Disc Formats
Regional Code Distribution
DVD Disc Logos
Disc Usage and Maintenance
Using the Player:
Display Panel
Remote Control
Front Panel Overview
Rear Panel Overview
System Connections
Playing Discs
Using OSD Guide Menu
Player Menu System
Getting Help:
Troubleshooting
Product Specifications
1
8
9
10
10
11
17
18
24
6
6
4
5
2
4
7
31
32
Safety Precautions
1)Symbols
An exclamation point within a triangle is an alert for important instructions on the use of the player.
To avoid the risk of electric shock, DO NOT open the cover of the player.
A lighting flash and arrowhead within a triangle is a warning sign alerting you of dangerous voltage inside the player.
CAUTION:
To reduce the risk of fire, electrical shock or damage to the player, do not expose this device to moisture and do not place water filled objects close to or on top of it.
2)Usage Notice a.
b.
c.
d.
e.
f.
Before plugging in this device, make sure your power supply voltage matches the product. The working voltage of this player is marked on the rear panel.
To avoid damage to the audio system, switch the volume of connected devices such as speakers or amplifiers to minimum before turning the player on/off.
Unplug the player when unused for long periods.
Do not unplug by pulling on the power cable.
Do not place heavy objects on top of the player.
Do not put fingers or other objects into the player.
2
3)Maintenance Notice a.
b.
c.
Do not expose the player to excessive heat, direct sunlight, dust, moisture, vibration, shock, moisture, liquids, speakers or magnetic objects.
Trouble with getting the player to work may arise due to condensation on the lens when moved from a warm to cold environment. To resolve this, turn on the player to warm it up, and then play a disc 1-2 hours after. (Do not leave a disc inside the player while it is warming up)
Clean the surface of the player with neutral detergent instead of organic substances such as alcohol or gasoline. Do not burnish with sand paper.
4)Caution a.
b.
To avoid the possibility of fire, electric shock or damage to player, do not expose this device to liquids or moisture.
This player employs a laser system. To prevent direct exposure to laser beam, do not open the cover. Visible laser beams when uncovered. DO NOT stare into beam.
5)Reminders a.
b.
c.
To ensure proper use of this player, please read the user manual carefully and store for future reference.
Should this player require maintenance, contact the dealer, an authorized service center or an experienced radio/TV technician.
All pictures in the instructions are for reference only. Specific contents are subject to actual display version
3
Main Features
Supports 720p / 1080i / 1080p (via component and HDMI)
Supports SVGA / XGA / SXGA / 720P / 1080i (via VGA/RGB-HV output)
Supports MPEG4 file format (within avi files)
Video outputs include composite video output, S-Video, component, HDMI and
VGA/RGB-HV
Audio outputs include optical, coaxial, mixed stereo and 5.1 channel audio outputs
Upscales standard DVDs to high definition resolution
Supports PAL (50hz) and NTSC (60hz) 720p / 1080i / 1080p video modes
Supports DVD, Audio CD, VCD, SVCD, HDCD and MP3 playback
Supports firmware upgrade
Package Contents
HD DVD player
Remote control
Batteries
AV connection cable x 1 x 1 x 2 x 1
HDMI connection cable
Power cord
User manual x 1 x 1 x 1
4
Supported Disc Formats
Remarks
Includes
Includes
5
DVD Region Codes
Region Code Region
USA, Canada
Japan, Europe, South Africa, Middle East, Greenland
South Korea, Taiwan, Hong Kong, Parts of South East Asia
Australia, New Zealand, Latin America (including Mexico)
Eastern Europe, Russia, India, Africa
China
The H4000 can play DVD titles from all regions listed on the table above.
DVD Logos
6
Proper Use and Handling of Discs
Do not touch the signal (reflective) surfaces. Hold discs by the edges, or by one edge and the center hole.
Do not affix labels or adhesive tapes to the disc surface this will unbalance the disc.
Do not scratch or damage the label this will make the disc unreadable.
Discs run at high speeds inside the player. Do not use damaged (scratched or warped) discs.
Dirty discs can cause player malfunctions. Always keep discs clean by gently wiping the surface with a soft clean cloth (moving from the inner to the outer perimeter)
If a disc is dirty, wet a soft cloth in water, wring out the cloth thoroughly, wipe the dirt away gently, and then remove any water drops from the disc with a soft dry cloth.
Do not use record-cleaning sprays or anesthetic agents on discs. Never clean discs using benzene, thinner or other volatile solvents which may cause damage to disc surfaces.
To avoid warping discs, store discs in their original cases. Do not leave discs under high temperature and humidity.
7
Display Panel
1 2 3 13 14
4 5 6 7
1.
2.
3.
4.
5.
Disc type(DVD)
Play mode
Pause mode
Disc type(VCD)
Disc type(MP3)
8 9 10 11
6.
7.
8.
9.
10.
PBC (VCD PBC)
Disc running display
Chapter/Track number
Hours
Minutes
11.
12.
13.
14.
Seconds
Dolby Digital
DTS logo
Repeat all
12
8
Remote Control Overview
A-B
5
9
VGA
13
TITLE
MENU
20
23
1
16
28
29
VOL
32
SUB-
TITLE
35
1
39
5
43
CLEAR
47
SEARCH
DISPLAY
2
REPEAT
6
HD
10
15
19
21
24
26
33
36
2
6
40
44
9
MUTE
3
PROGRAM
7
50/60hz
11
ENTER
17
30
ZOOM
SETUP
37
3
41
7
45
0
EJECT
ANGLE
8
PAL/NTSC
12
DVD
MENU
14
STEP
31
AUDIO
34
38
4
42
8
BOOK
MARK
46
H4000 HD UPSCALING DVD PLAYER
4
18
22
25
27
1. Power on/off
2. Display: show or hide OSD menu
3. Mute: press once to mute, twice to undo mute
4. Eject: open or close disc tray
5. AB Repeat
6. Repeat: repeat chapters or titles
7. Program: Open the programmable play list
8. Angle: switch play angles
9. VGA mode: switch between VGA / SVGA / XGA / SXGA
10. HD video mode: switch between 480p / 576p / 720p /
1080i / 1080p
11. 50/60hz.: press to switch between 50hz and 60hz. Only
applicable for 720p / 1080i / 1080p HD modes
12. PAL/NTSC: switch between normal PAL/NTSC video
modes
13. Title: jump to main title page of DVD title
14. Menu: jump to menu of DVD title
15. Up cursor
16. Left cursor
17. Enter / OK
18. Right cursor
19. Down cursor
20. Fast backward
21. Play
22. Fast forward
23. Previous: skip backward
24. Pause
25. Next: skip forward
26. Stop
27. Slow: slow motion playback
28. Volume increase (0 32)
29. Volume decrease (0 32)
30. Zoom
31. Step: plays video frame by frame
32. Subtitle: switch between subtitle options
33. Setup: displays system setup menu
34. Audio: switch audio tracks
35. to 42, 44, 45: Numeric buttons
43. Clear: erase the number or data you just entered
46. Bookmark: press to make a bookmark
47. Search
Note:
1. Do not mix different types of batteries
2. Replace batteries when the remote controls functions and range are weak
3. Do not expose remote control to excessive heat or moisture
4. Do not leave the remote control under direct sunlight to avoid signal interference
5. Use remote control within 7 meters and 30 degrees of the player
9
Front Panel Overview
H4000 HD UPSCALING DVD PLAYER
1 2 3 4
5
1. Disc Tray (Note: load discs label-side up)
2. Sensor: point remote control towards sensor to operate the player
3. LED screen: displays system information
4. [Stop] Stop playback
5. Power on/off
6. [Previous] Previous: skips to previous track or page
7. [Eject] Open/Close: inserts or ejects disc tray
8. [Play Pause]Play/Pause: plays or pauses disc
9. [Next] Next: skips to next track or page
6 7 8 9
Rear Panel Overview
/
-
50 60HZ
1. 5.1 channel surround sound audio
outputs
2. MIXED audio outputs
3. Component video outputs
4. Coaxial audio output
5. Optical audio output
6. S-Video output
10
7. VGA output
8. Power on/off
9. Composite video output
10.HDMI output
11.Power IN (90V-240V 50/60hz)
How to connect the player to your AV system
Connecting via composite video
Using the AV cables supplied, insert the yellow cable into the video socket of your
TV.
Insert the white cable into the left channel socket and the red cable into the right channel socket , and then connect the other ends of the white (left) and red (right) cables to the corresponding inputs on your TV.
Connecting via S-video
If there is an S-video input socket in your TV set you can connect the TV and the player using the S-video cable.
Use the supplied audio cable to connect the player to your TV.
Or you can use the digital audio connection (coaxial/optical) or 5.1 channel connection to your AV receiver.
11
Connecting via component video connection
Insert one end of the component video (Y / Cb / Cr) cable into the red/blue/green socket of the component video output located on the rear of the player. Insert the other end of the cable into the component video input socket located on your TV.
Use the supplied audio cable to connect the player to your TV.
Or you can use digital audio connection (coaxial/optical) or 5.1 channel connection to your AV receiver.
Connecting via HDMI/DVI video
Use the HDMI cable to connect the player to HDMI input of your TV.
You need an HDMI to DVI cable to connect the player to DVI input.
HDMI will output both video and audio (you need to turn off the digital output in the players setup in order to get audio from HDMI)
12
Connecting to VGA/RGB-HV
Use the VGA cable to connect the VGA/RGB -HV output of the player to the VGA or RGB-HV input of your TV.
Connecting to a 2 channel audio amplifier
Connect the video output of the DVD player to the video input of your TV using the corresponding cables (video cable / S-video cable / component cable).
Connect the audio cables FL and FR to the sound input L/R socket on the amplifier.
13
Connecting to AV receiver for digital audio connection
Connect the video output of the DVD player to the video input of your TV using the corresponding cables (video cable / S-video cable / component cable).
Use a fiber optic cable or coaxial cable to connect the optical or coaxial socket located on the rear panel of the player to the AV receiver.
To setup the Digital Audio options you can go to the system setup. Please see Digital
Sound Output
14
Connecting to a 5.1 channel amplifier
Connect the video output of the DVD player to the video input of your TV using the corresponding cables (video cable / S-video cable / component cable).
Connect the 5.1 audio output terminals of the player to the amplifier using the respective connection cables (L and R of MIXED/FRONT, L and R of SURROUND,
CENTER and SUBWOOFER).
Ensure that the 6 speakers are connected to the corresponding outputs of the amplifier.
15
Recommended Speaker Layout for 5.1
Channel System
16
Playing Discs
1. This player can play all kinds of discs including DVD, VCD, Audio CD, CVD, SVCD,
MP3 and JPEG
2. Play discs:
i.
Connect TV set to the player
ii.
Turn on the player
iii.
Eject the tray by pressing the Open/Close button
iv. Place the disc on the tray and press Open/Close
v.
The disc will be played automatically (some discs may require you to press
the Play button to play)
3. Zoom: Press the ZOOM button to enlarge the image. Each time you press the
button, the image will be enlarged 2-3-4-5 times bigger, and then it will return to
its normal size. While zoomed, you can move the viewing area using the cursor
buttons.
4. Mute: Press the MUTE BUTTON once to turn on mute and press again to turn
off mute.
5. Title: Some discs will include a Title option. This is often a short introduction to
the video before going to the DVD menu. Press the TITLE button to play the DVD
from the Title
6. Menu: This is the DVD menu. Common options for a DVD menu are Language
options, special features and episode selection. Press the MENU button to open
the DVD menu. To return to normal play, press the MENU button again.
17
Using On Screen Display Menu
The OSD (On Screen Display) menu lets you select from playback options while playing a disc.
Press DISPLAY to see playback options. Use cursor keys to select a playback function.
Note: you can only select a playback function that is supported by the disc you are playing. If a function is not supported by the disc, the icon will be highlighted grey.
DVD screen display:
Title | Chapter | Subtitle | Channel | Repeat | Bookmark | Multi-angle | Time
Video display:
File | Subtitle | Channel | Repeat | Time
Audio CD display:
Track | Play mode | Time
18
Time Display
This function is used to display the time elapsed on the disc or to seek to a specific time on the disc.
1. Press DISPLAY on the remote control to open the OSD
menu.
2. Use the numeric buttons to input the desired time in
HH:MM:SS format.
Select Title
This function is used to select different titles when playing a disc with more than one title (for example, a TV series).
1. While playing a disc Press DISPLAY.
2. Use the cursor keys to highlight the Title option
3. Enter the desired title number using the numeric buttons or
press [up] [down] to skip to the next or pervious titles.
Note:
Some discs have only one title.
Select Chapter
This function is used to select different chapters when playing a title with more than one title.
1. While playing a disc Press DISPLAY
2. Use the cursor keys to highlight the Chapter option
3. Enter the desired chapter number using the numeric buttons
or press [up] [down] to skip to the next or pervious chapter
Select Subtitle
The Default setting for subtitles is Off (No subtitles).
To select subtitles;
1. While playing a disc, press DISPLAY.
2. Use the cursor keys to highlight the subtitle options
3. Use the [Up] [down] buttons to select the desired subtitle
language from those available on the disc
4. Press ENTER to display the selected subtitles OR
Press the SUBTITLE button repeatedly to select the desired
subtitle set and press ENTER to display the selected subtitles
19
Select Audio
Language
This function is used to select different audio tracks (Languages) when playing a disc with more than one Audio language track.
1. While playing a disc, press DISPLAY.
2. Use the cursor keys to highlight the Audio options
3. Use the [Up] [down] buttons to select the desired subtitle
set from those available on the disc
4. Press ENTER to start playing the selected Audio language
OR
Press the AUDIO button repeatedly to select the desired
language and press ENTER to start playing the selected
Audio language
Repeat Mode
(Title / Chapter / A-B)
This function is used to continuously replay a specific Title or
Chapter or a user specified section (A to B).
The default Repeat setting is OFF.
1. While playing a disc, press DISPLAY
2. Use the cursor keys to highlight the PLAY MODE / REPEAT
MODE
3.Select the desired repeat mode
OR
Press REPEAT to switch between Title Repeat, Chapter
Repeat, A-B Repeat and back to OFF.
Bookmark Feature
The bookmark function is used to create a book mark (time stamp) in the content that you are playing.
You can return to a book mark at any stage by using the call bookmark menu.
A maximum of six bookmarks can be created.
To play the book mark, select the [>] play icon and press enter. To delete a bookmark, Select the Trashcan icon and press enter. Pen icons indicate unused book marks.
20
Multi-angle playing
Bookmark Setup
Press DISPLAY on the remote control and use cursor keys to highlight the bookmark options. Press ENTER to display the menu
1. Select a bookmark that is not yet used. The current play
time (play time elapsed) will be displayed beside the bookmark.
2. When you reach the desired point for the bookmark, press
ENTER. The bookmark is now created.
Clear Bookmark
Bookmarks are automatically cleared when the disc is ejected or the player is switched off.
To clear a disc while still playing:
1. While playing a disc, press DISPLAY.
2. Use the cursor keys to highlight the Bookmark menu and
press ENTER to open the sub menu.
3. Use the cursor keys to highlight the Trashcan icon to the left
of the book mark and press ENTER. This clears the bookmark
and makes it available for reuse
Some DVD discs have multi-angle view options. You can select different viewing angles using the Multi-Angle play function. If the disc does not support multi angle, this feature will not be available.
1. If the disc does support multi angle, Press ANGLE and the
multi-angle icon will be displayed as well as the current
angle. E.g. 1/4 means the current viewing angle is 1 out of
4 available.
2. Press ANGLE again to switch to other angles or use [up]
[down] to select angle.
21
Play Mode When playing a disc, using the OSD menu you can choose from the following Playing Modes - Normal, Random or Program.
Normal: Play the disc according to the recording sequence from start to Finish.
Random: Randomly play disc content.
While playing a disc press DISPLAY
Use the cursor keys to highlight the playing options.
Press [Up] [Down] to select Random play and press ENTER.
To switch back to normal play mode, repeat steps 1-3 and select Normal play instead of Random.
Program: Edit the play list and play the disc content in the order you specify.
You can only use this option when you have edited the play
list.
VCD play control
(PBC)
VCD play control can be used on a VCD2.0 or higher disc.
1. While playing a disc press DISPLAY
2. Use the cursor keys to highlight the Playing Mode options.
3. [Up] [Down] to select to select PCB and press ENTER
22
Playing mpeg4
When you insert a disc with Mp4DivX files, the first file automatically begins to play*.
You can also manually select which file to play from STOP mode by pressing play to see a list of the files. To see file / folder information, select the file and press
ENTER. To play a file, select it and press Play.
To play all the files in a folder / disc start playing the first file and then press display to open the OSD. Then select the desired playback / repeat option.
*The first file is played automatically if Auto / Easy play is enabled.
Playing Audio CD
When you load an audio CD, the CD begins to play. If it does not begin automatically, press PLAY. To select a different track, press the DISPLAY button to bring up the
OSD control menu. Or press NEXT
Playing Mp3
When you insert an MP3 disc or a disc with a folder containing music files the list of files appears. Select a file and press PLAY to begin playback. The MP3 menu automatically appears on the screen when playback starts. To select a different track, press DISPLAY to open the OSD control menu.
Use the cursor keys to highlight the desired file and press ENTER to begin playing the file.
Playing a JPEG file
Open JPEG files using the same procedure for MP3 files (See above).
While viewing a JPEG image, press ZOOM and a red Zoom frame appears. Use the direction keys to adjust the frame position.
To rotate a JPEG image press ANGLE. Each time you press ANGLE the image is rotated 90 degrees.
Slide Show Mode
Slide Show mode is used to play a series of JPEG images on a disc according to sequence.
1. Insert a disc containing the images and use the cursor keys to highlight the disc
and press ENTER
2. To select playing speed use [Up][Down]
3. While the slide show is playing, use [Left][Right] to skip the current image.
4. Press [STOP] to stop the slide show. You can press Root Menu to display disc
menu.
5. You can also open the OSD by pressing DISPLAY
23
Player Setup Menu
The Player setup menu is different from the disc menu and OSD. It is used to alter the players Audio, Video and user options as well as set default settings.
The menu can be used under STOP mode by pressing
SETUP on the remote control.
Within the Setup menu, if an option has a sub menu there will be an arrowhead on the right hand side of the option. Press ENTER to open the sub menu or press the [Right] button.
Use the direction buttons to choose the option you want to setup and press ENTER.
Press [back] to exit the sub-menu or Setup Menu.
Sound Setup
SOUND SETUP allows you to set the sound according to the playback and connection conditions.
SETUP SOUND
DISPLAY
LANGUAGE
LOCK
DEFAULT
SOUND DIGITAL OUTPUT
STEREO
SPEAKER SETUP
LPCM OUTPUT
PROLOGIC II
TEST TONE
Digital output
1. Select Dolby Digital / DTS for original digital output.
2. Use cursor to select DIGITAL OUTPUT option and
press OK.
3. Use cursor to select desired audio type, press OK to
confirm
4. Use cursor to return to digital output option
DIGITAL OUTPUT DOLBY
DTS
24
Stereo Sound
1. Select sound menu to open player setup
2. Use cursor keys to highlight STEREO option
3. Press [OK] to turn stereo sound ON or OFF
STEREO ON
OFF
Speaker Setup
Speaker setup allows you to set up speaker size, distance and volume
1. Select SOUND menu and press [OK]
2. Use the cursor to select speaker setup
SPEAKER SETUP SPEAKERS
DISTANCE
VOLUME
Speaker
Using this option, you can setup the speaker according to the volume of the player. The following options are available:
Left front - small / large
Right front - small / large
Center - none / small / large
Left Surround - none / small / large
Right surround - none / small / large
Subwoofer - on / off
SPEAKERS
If you need to set up speakers, you must first turn off the Stereo option.
LEFT FRONT
RIGHT FRONT
CENTER
LEFT SURROUND
RIGHT SURROUND
SUBWOOFER
SMALL / LARGE
SMALL / LARGE
NONE/SMALL/LARGE
NONE/SMALL/LARGE
NONE/SMALL/LARGE
ON/OFF
25
Distance
Using this option you can setup the distance between audience and speakers, in order to get the best performance. The Default setting is 3.3 meters. You can adjust the distance for front, middle and surround speakers.
1. Select a speaker (L Front / R Front / Center / L
Surround / R Surround)
2. Use the cursor keys to adjust distance from 1m to
6.6m
DISTANCE LEFT FRONT
RIGHT FRONT
CENTER
LEFT SURROUND
RIGHT SURROUND
3.3m.
3.3m.
3.3m.
3.3m.
3.3m.
Volume
1. Select SOUND menu
2. Use cursor to select SPEAKER SETUP and press
OK
3. Select VOLUMR option and press OK
4. Select the desired speaker
5. Use the cursor to adjust volume within 0 to -10db
VOLUME LEFT FRONT
RIGHT FRONT
CENTER
LEFT SURROUND
RIGHT SURROUND
SUBWOOFER
0dB
0dB
0dB
0dB
0dB
0dB
LPCM Output
1. Press SETUP on the remote control, select SETUP
and press OK
2. Use cursor to select SOUND and press OK
3. Select LPCM output
4. Press OK repeatedly to select the desired frequency
LPCM OUTPUT 96 K
48 K
Pro Logic II
1. Press [SETUP] on remote control and select the
SETUP option. Press OK
2. Use cursor to select SOUND and press [OK]
3. Use cursor to select PRO LOGIC II and press OK
4. Use cursor to select desired option and press OK to
confirm
PROLOGIC II DSP MODE OFF
IMULATION
MUSIC
MOVIE
MATRIX
26
Smart Play
If Smart Play is enabled (On) discs are automatically played when they are loaded into the player.
1. Press [SETUP] on remote control and select the SETUP option. Press OK
2. Use cursor to select SOUND and press [OK]
3. Use cursor to select SMART PLAY and press [OK] to turn easy play On / Off
Display Setup
In the display menu you can adjust the TV System, TV
Image, S-Video, HD Scan frequency, Video options,
HDMI mode and HDMI Select options.
1. Press SETUP on the remote control
2. Use cursor to select DISPLAY and press OK.
3. Use cursor to move to the desired option and press
OK
NOTE:
HD SCAN FREQ and Video options are available only in High Definition mode (720p, 1080i, 1080p)
DISPLAY TV SYSTEM
TV IMAGE
HD SCAN FREQ
BRIGHTNESS
HDMI MODE
TV System
1. Press SETUP on the remote control
2. Use Cursor to select display and press OK
3. Use cursor to select TV system and press OK
4. Use cursor to select desired output and press OK
TV SYSTEM PAL
NTSC
PROGRESSIVE 480P
PROGRESSIVE 576P
HDTV 720p OUTPUT
HDTV 1080i OUTPUT
VGA OUTPUT
SVGA OUTPUT
XGA OUTPUT
SXGA OUTPUT
HDTV 1080P OUTPUT
VGA 720p
VGA 1080i
27
NTSC
Changes the video signals of a PAL DVD disc and outputs it in NTSC format
PAL
Changes the video signals of a NTSC disc and outputs it in the PAL format
Progressive Scan output
The player supports 480NTSC (USA) and 576 PAL (Europe) progressive scan output.
Progressive scan output can improve image quality. When using progressive scan output, it is required to connect the player using the component video out jacks or
HDMI to a TV that is able to accept the video signal in progressive format.
High Definition 720p / 1080i / 1080p output
The player supports 720p, 1080i and 1080p high definition video output.
720p/1080i/1080p resolution is available via HDMI and component outputs,
720p/1080i available via VGA/RGB-HV output.
VGA / S-VGA / XGA / SXGA output
The player can provide VGA (640 X 480) / SVGA (800 X 600) / XGA (1024 X 768) /
SXGA (1280 X 1024)
TV Image
With this option you can select the settings according to the TV to be connected. The TV has three display options.
1. Press SETUP on the remote control
2. Use the cursor to select DISPLAY and press OK
3. Use the cursor to select TV IMAGE and press OK
4. Use cursor to select the desired TV image and press
OK
TV IMAGE 4:3 LETTER BOX
4:3 STANDARD
16:9 WIDE SCREEN
28
Video Options
Use the video options to set the levels of the various video properties:
Color, Contrast, Brightness, Tint, Black level
1. Press SETUP on the remote control
2. Use cursor to select DISPLAY and press OK
3. Use cursor to select VIDEO OPTIONS
4. Use cursor to select the desired property and press
OK
5.Use the cursor UP / Down to change the selected
value.
HDMI Mode
Use this option to manually select one of three available
HDMI modes ¨C YcbCr422 / YcbCr444 / RGB
HDMI MODE
1. Press SETUP on the remote control
2. Use cursor to select DISPLAY and press OK
3. Use cursor to select HDMI MODE
4. Press OK repeatedly to select the desired setting
HDMI Select
This option is used to select the type of TV the player is connected to from the HDMI output. You can connect to a HDMI display or a DVI display using a HDMI-DVI cable. There are three options for HDMI Select ¨C HDMI,
DVI, AUTO
1. Press SETUP on the remote control
2. Use cursor to select DISPLAY and press OK
3. Use cursor to select HDMI SELECT
4. Press OK repeatedly to select the desired setting
RGB
YCBCR422
YCBCR444
29
Languages
You can individually set the language that the player uses for:
Player menu - Setup menus etc....
Disc menu - Menus when playing discs
Audio - Default audio language to select with videos
Subtitle - Default Subtitle language to select with videos
1. Press SETUP on the remote control
2. Use cursor to select LANGUAGES and press OK
3. Use cursor to select desired option and press OK
4. Use cursor to select desired language and press OK
Parental Lock
This function restricts playback of DVD video disc which contains undesired ratings. The user can set the rating level and the DVD player will not play DVD with a rating above this without the password being entered.
1. Press SETUP on the remote control.
2. Use the cursor to select LOCK and press OK.
3. PASSWORD menu will be displayed
4. Enter the password. Default password is 8888
Select the desired option that you wish to adjust
LOCK
RATING LIMITS
CHANGE PWD
RATING LIMITS
Rating Limit
1. Select RATING LIMITS and press OK
2. Use the cursor to select the desired rating level
Note, Level 8 may not be available
LV8
LV7 NC-17
LV6 PG-R
LV5
LV4 PG-13
LV3 PG
LV2
LV1G
Change password or set rating limit.
Change Password:
1. Select CHANGE PWD and press OK
2. Enter new password and press OK to confirm
New password will now be activated
CHANGE PWD ENTER NEW PASSWORD
OK
30
Troubleshooting
Problem
No Power
Can not play Disc
Possible Cause and Solution
1. Ensure the power lead is firmly connected to the player and plugged
into the socket fully.
2. Switch the power on
1. Switch the power on.
2. The Disc type is not supported by the player or is seriously damaged.
Only use discs that can be played by this player
3. Wrong side of disc place the disc on the tray with printed side
up.
4. Restriction of Disc level. Cancel the restriction.
5. Condensation on the laser lense. Switch on the player without any
disc loaded and allow to Warm up for 1-2 hours.
No Picture
Picture distorted or loss of color
1.The TV Video Input state is incorrect. Adjust the TV to AV/S-Video
/Component or HDMI depending on which player output is being
used.
2. Video output settings from player are incorrect for the TV / Display.
3. Damaged Media clean the disc
1. The output settings of the DVD player are not matched with the
input settings of the TV / Display. Recheck both player and TV
settings
2. Damaged or poor quality media clean or replace the disc
3. Connect the DVD player directly to the TV set.
No Disc / Wrong Disc The disc could be dirty or damaged. Please clean or replace the disc
Can not display picture as full screen
1. Reset the display mode of the TV
2. Select the corresponding screen mode on the DVD player setting
menu
Can not select a chapter
Remote Control does not work
No Sound
Some discs are disabled from selecting an individual chapter
1. Obstacle between the remote control and receiving window - point
the remote to the player directly i.e. get a clear line of sight.
2. The remote control batteries have the wrong polarity or low power.
Please reload or replace the batteries
1. Check the TV or Amplifier equipment to make sure it is turned on.
2. The volume control has been set to minimum or MUTE has
been turned on.
Note:
There is no audio output when the player is paused, in Step mode,
slow motion, FF or FR status.
31
Product Specification
Disc types
Formats
Video output
Audio output
DVD/SVCD/VCD/CD/HDCD/MP3/MP3/WMA
MPEG4(DivX, Xvid, MPEG1, MPEG2 and MPEG4) video file playback.
Composite video,
S-Video,
Y, Pb/Cb, Pr/Cr Component video,
VGA/RGB-HV video,
* HDMI (Video & Audio)
* DVI available by using a HDMI to DVI cable.
2 channel mixed audio out
5.1 channel audio,
Coaxial Digital audio,
Optical Digital audio
Video performance
Audio performance
Power supply
Power consumption
AC 110V-240V 50/60hz
20W
Support Information:
If you have any questions or queries about this product, you can submit a support ticket at www.neodigits.com/esupport or you can email us at [email protected]
All questions will be answered within 48 hours (excluding Saturday, Sunday and public holidays)
There is also a product FAQ available at www.neodigits.com
If you have any suggestions about this product, please feel free to email us at [email protected]
HANTZ + PARTNER
The Upgrade Company! www.hantz.com
Deutschland:
Tel.: 0761 / 59 21 00
Fax: 0761 / 58 52 28
32
Schweiz:
Tel.: 061 / 27 311 - 31
Fax: 061 / 27 311 - 39
Österreich:
Tel.: 01 / 58 55 430
Fax: 01 / 58 55 460
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement