Barco ClickShare CX-30 User Guide
Reklam
Reklam
ENABLING BRIGHT OUTCOMES
CX-30
Model: C 3010S, R9861600D01C
User Guide
Barco NV
Beneluxpark 21, 8500 Kortrijk, Belgium www.barco.com/en/support www.barco.com
Registered office: Barco NV
President Kennedypark 35, 8500 Kortrijk, Belgium www.barco.com/en/support www.barco.com
Copyright ©
All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored in a retrieval system without the prior written consent of Barco.
Trademarks
USB Type-C TM and USB-C TM are trademarks of USB Implementers Forum.
Trademarks
Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights of their respective holders. All brand and product names mentioned in this manual serve as comments or examples and are not to be understood as advertising for the products or their manufacturers.
HDMI Trademark Notice
The terms HDMI, HDMI High Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Product Security Incident Response
As a global technology leader, Barco is committed to deliver secure solutions and services to our customers, while protecting Barco’s intellectual property. When product security concerns are received, the product security incident response process will be triggered immediately. To address specific security concerns or to report security issues with Barco products, please inform us via contact details mentioned on https://www.
barco. com/psirt . To protect our customers, Barco does not publically disclose or confirm security vulnerabilities until Barco has conducted an analysis of the product and issued fixes and/or mitigations.
Patent protection
This product is covered by patents and/or pending patent applications. For more info: https://www.barco.com/ en/about-barco/legal/patents.
Guarantee and Compensation
Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guarantee. On receipt, the purchaser must immediately inspect all delivered goods for damage incurred during transport, as well as for material and manufacturing faults Barco must be informed immediately in writing of any complaints.
The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on the date of commissioning, at latest 30 days after the transfer of risks. In the event of justified notice of complaint, Barco can repair the fault or provide a replacement at its own discretion within an appropriate period. If this measure proves to be impossible or unsuccessful, the purchaser can demand a reduction in the purchase price or cancellation of the contract. All other claims, in particular those relating to compensation for direct or indirect damage, and also damage attributed to the operation of software as well as to other services provided by Barco, being a component of the system or independent service, will be deemed invalid provided the damage is not proven to be attributed to the absence of properties guaranteed in writing or due to the intent or gross negligence or part of Barco.
If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco, or if the goods are handled incorrectly, in particular if the systems are operated incorrectly or if, after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid. Not included in the guarantee coverage are system failures which are attributed to programs or special electronic circuitry provided by the purchaser, e.g. interfaces. Normal wear as well as normal maintenance are not subject to the guarantee provided by Barco either.
The environmental conditions as well as the servicing and maintenance regulations specified in this manual must be complied with by the customer.
Barco ClickShare Product Specific End User License Agreement
1
THIS PRODUCT SPECIFIC USER LICENSE AGREEMENT (EULA) TOGETHER WITH THE BARCO
GENERAL EULA ATTACHED HERETO SET OUT THE TERMS OF USE OF THE SOFTWARE.
PLEASE READ THIS DOCUMENT CAREFULLY BEFORE OPENING OR DOWNLOADING AND USING
THE SOFTWARE.
DO NOT ACCEPT THE LICENSE, AND DO NOT INSTALL, DOWNLOAD, ACCESS, OR OTHERWISE COPY
OR USE ALL OR ANY PORTION OF THE SOFTWARE UNLESS YOU CAN AGREE WITH ITS TERMS AS
SET OUT IN THIS LICENSE AGREEMENT.
1. Entitlement
Barco ClickShare (the “Software”) offered as a wireless presentation solution that includes the respective software components as further detailed in the applicable Documentation.
The Software can be used upon purchase from, and subject to payment of the relating purchase price to, a
Barco authorized distributor or reseller of the ClickShare base unit and button or download of the authorized
ClickShare applications (each a “Barco ClickShare Product”).
• Term
The Software can be used under the terms of this EULA from the date of first use of the Barco ClickShare
Product, for as long as you operate such Barco ClickShare Product.
• Deployment and Use
The Software shall be used solely in association with a Barco ClickShare Product in accordance with the
Documentation issued by Barco for such Product.
2. Support
The Software is subject to the warranty conditions outlined in the Barco warranty rider. Maintenance, including the provision of upgrades and updates to the Software, and helpdesk support are available at your option on the terms of Barco’s then current warranty rider.
Higher maintenance and support levels can be obtained at the moment of product sale or during the Barco
ClickShare Product and/or Software warranty term.
Higher maintenance and support levels may be included in the initial transaction if ordered and paid for additionally. It is strongly suggested to maintain the maintenance and support agreement without interruption.
Barco reserves the right not to restart maintenance following an interruption by the customer.
3. Terms of Use
The Software can be used as set out in the Barco EULA attached hereto.
The provisions of this Product Specific EULA override the Barco generic EULA in case of conflicts or inconsistencies.
In case of (inadvertent or other) non-compliance (e. g. where the actual use overshoots the use authorized hereunder), Barco shall have the option to suspend access to the Software until the non-compliance is remedied, failing of which Barco may terminate the License Agreement as set out herein.
4. Privacy
You are controller for personal data which are being processed via the Software. Therefore, you remain solely responsible for complying with all applicable data protection laws and for implementing and maintaining privacy protection and security measures (especially for components that you provide or control). Barco disclaims any liability in this regard.
Barco created a specific privacy policy for the ClickShare software application for mobile devices, which describes the processing of personal data via this application ( http://www. barco. com/en/about-barco/legal/ privacy-policy/clickshare-app ).
5. Other Terms
• Open Source components
The Software contains software components released under an Open Source license.
A list of the third party components used is available in the Software’s README files, through the “My
Barco” section of the Barco website or through other (online) means. The applicable license terms,
1.
In the event of any differences or inconsistencies between translations of the EULA and the English text of the EULA, the English text will prevail.
copyright notices and, as relevant, source code access conditions apply as set out in the Barco EULA attached hereto.
• Retention of data
Barco right to use and retain Functional Information (section 10.2 of the EULA) shall survive the term of this EULA.
BARCO END USER LICENSE AGREEMENT
By accepting these terms (through tick box or other mechanism designed to acknowledge agreement to the terms of an electronic copy of this License Agreement), or by installing, downloading, accessing, or otherwise copying or using all or any portion of the Software (as defined below), (i) you accept this License Agreement on behalf of the entity for which you are authorized to act (e. g., your employer) and you agree to act in a manner consistent with this License Agreement (or, if there is no such entity for which you are authorized to act, you accept this License Agreement on behalf of yourself as an individual and acknowledge that you are legally bound by this Agreement), and (ii) you represent and warrant that you are duly empowered by the end user in case you act on behalf of such entity.
These terms apply to your use of the Software as of and for the original Term of your license. When you renew or purchase an additional license, the then current version of this License Agreement shall apply and will remain unchanged during the term of that license and/or in respect of such changed elements. The other contract documents (Product Specific EULA; Maintenance and Support Agreement, if and when provided alongside with this document) applies in addition to these terms and constitute the entire License Agreement.
You acknowledge that an electronic copy of this Agreement shall have the same proving value as a hard copy signed by the parties.
If you are unwilling to accept this License Agreement on these terms, or you do not have the right, power and authority to act on behalf of and bind such entity (or yourself as an individual if there is no such entity), DO
NOT SELECT THE “I ACCEPT” BUTTON OR OTHERWISE CLICK ON ANY BUTTON OR OTHER
MECHANISM DESIGNED TO ACKNOWLEDGE AGREEMENT, AND DO NOT INSTALL, DOWNLOAD,
ACCESS, OR OTHERWISE COPY OR USE ALL OR ANY PORTION OF THE SOFTWARE.
1. Definitions
“Affiliate” means any corporation or other entity directly or indirectly, controlling, controlled by or under common control with such corporation or entity.
For the purpose of the above, “control” shall mean (i) the ownership or control, directly or indirectly, of fifty percent (50%) or more of the equity capital or the shares or voting rights in the corporation or other entity in question or (ii) the control of the composition of the board of directors of the corporation or other entity in question.
“Barco” means Barco NV (company number 0473.191.041) with company address at Beneluxpark 21, 8500
Kortrijk, Belgium, or its designated Affiliate licensing to you the proprietary software which is the subject matter of this Agreement.
“Documentation” means all technical, reference and installation manuals, user guides, published performance specifications and other written documentation provided by Barco generally to its licensees with respect to the
Software, along with any modifications and updates thereto;
“DRM” means Barco’s digital rights management platform used to provide access to and access conditions of the Software.
“License Agreement” means this Barco End User License Agreement (EULA), incorporating the terms of the
Product Specific EULA, and any modifications thereof as set out herein.
“Product Specific EULA” means the supplemental software terms applicable
“Software” means the Barco proprietary software which is being licensed hereunder, released in object code only.
“Term” means the period set out in article 9.1 hereof.
“you” means the entity on behalf of which these terms are accepted, and any of its representatives having access to the Software.
2. License Grant
2.1
‘License Scope’ . Subject to compliance with all license terms and payment of applicable fees, Barco grants you a limited, non-exclusive, non-assignable, non-transferable user license (without the right to grant sublicenses). Save for the Product Specific EULA or any broader license terms confirmed through the DRM
tool, (i) the license under this License Agreement applies to one (1) copy of the Software to be used on one single computing device and (ii) installation on a computing device that may be concurrently accessed by more than one user shall not constitute a permitted use and a separate license is required for each active user connected to a computing device on which the Software is being used
2.2
‘ License Type’ . The applicable license type, and your rights in time, deployment and usage, are further detailed in the Product Specific EULA (in the absence of which the scope shall be as set in article2.1 hereof).
2.3
‘License restrictions’ .
Intended Use . You agree to use the Software solely as permitted by this License Agreement (and any Product
Specific EULA made part of it) and in a matter consistent with its design and Documentation.
No Transfer (License Agreement) . You agree not to transfer, assign or sublicense your license rights to any other person or entity, unless Barco’s prior written consent is obtained (which consent shall be reasonably given, but may come with a fee).
No Transfer (Software) . If you deactivate or uninstall the Software from the computer device on which it was originally installed, this will terminate this License Agreement unless otherwise and specifically approved by
Barco. You agree not to use the Software in association with other hardware or software that allows to pool connections, reroute information, reduce the number of devices or users that directly access or use the
Software, or reduce the number of devices or users the Software directly manages (sometimes referred to as
“multiplexing” or “pooling”) or otherwise attempt to reduce the number of licenses of any type that you need.
Authorized Users . The use of the Software is restricted to persons within your organization, or any third party representatives operating under your responsibility and control, provided any such persons have accepted the terms of this License Agreement. You agree not to use or permit the Software to be used to perform services for third parties, whether on a service bureau or time sharing basis or otherwise, without the prior written authorization of Barco. You shall not lease, rent, or otherwise transfer or grant a security or other interest in the
Software.
No Modifications . You shall not make error corrections to or otherwise modify or adapt the Software or create derivative works based upon the Software, or permit third parties to do the same.
No Reverse Engineering . You agree not to reverse engineer or decompile, decrypt, disassemble or otherwise reduce the Software to human-readable form, except to the extent otherwise expressly permitted under applicable law notwithstanding this restriction, or except to the extent Barco is legally required to permit such specific activity pursuant to any applicable open source license.
Code required to ensure interoperability . To the extent required by law, and at your written request, Barco shall provide you with the interface information needed to achieve interoperability between the Software and another independently created program used by you, on payment of Barco’s applicable fee (if any). You shall observe strict obligations of confidentiality with respect to such information and shall use such information in compliance with terms and conditions which Barco makes applicable.
No Unbundling . The Software may include various applications and components, may support multiple platforms and languages, and may be provided on multiple media or in multiple copies. Nonetheless, the
Software is designed and provided to you as a single product to be used as a single product on devices as permitted herein. You agree not to unbundle the component parts of the Software for use on different computer devices.
Territory . You agree to use the Software solely in the territory or region where you obtained the Software from
Barco or its authorized reseller or as otherwise stated in the Documentation. Any export if permitted shall comply with any applicable (export) laws and regulations.
2.4
‘Your Infrastructure’ . You remain responsible to procure and maintain hardware, operating system, network and other infrastructure (the “Infrastructure”) required to operate the Software and to keep such
Infrastructure functioning and virus-free. You acknowledge that the Software is a complex computer software application, and that the performance thereof may vary depending hardware platform, software interactions and configuration. You acknowledge that the Software is not designed and produced specifically to meet your specific requirements and expectations and the selection of the Software by you is entirely your own choice and decision.
3. Ownership. Intellectual Property Rights.
3.1
‘Ownership’ . Any Software is licensed, not sold to you, on a non-exclusive basis for use only under the terms of this License Agreement, and Barco and its suppliers reserve all rights not expressly granted to you.
You may own the carrier on which the Software is provided, but the Software is owned and copyrighted by
Barco or by third party suppliers. Your license confers no title or ownership and is not a sale of any rights in the
Software or its Documentation.
3.2
‘Third Party Materials’ . The Software may contain or require the use of certain third party technology
(whether proprietary or open source software), identified by Barco in the Documentation, readme file, thirdparty click-accept, on www. barco. com or elsewhere (the “Identified Components”). Identified Components may be subject to additional and/ or different terms and you agree that the Identified Components are licensed under the terms, disclaimers and warranties of their respective licenses which in the forthcoming case shall override the provisions of this License Agreement.
3.3
‘Source Code Access’ . To the extent required under third party (open source) license terms, and for a period of 36 months following your acceptance of this License Agreement, Barco shall provide access to the source code controlled by a third party (open source) license, via email or download link. If the relevant license terms require so, you may require Barco (attn. its legal department, at the address stated above) to obtain such code on tangible medium against payment of the cost of media, shipping and handling.
3.4
‘Copyright’ . The Software is protected by national and international laws and treaty provisions. Copyright on the Software components belongs to the respective initial copyright holder, each additional contributor and/ or their respective assignee(s), as may be identified in the Software Documentation, source code, README file, or otherwise. You shall not remove or obscure or otherwise alter the respective copyrights.
3.5
Trademarks.
Brand and product names mentioned in relation to the Software may be trademarks, registered trademarks or copyrights of their respective (third party) holders. All such brand and product names mentioned in relation to the Software serve as comments or examples and are not to be understood as advertising for the products or their manufacturers.
3.6
‘Trade Secrets’ . You agree not to disclose, provide or otherwise make available trade secrets contained within the Software and Documentation in any form to any third party without the prior written consent of
Barco. You shall implement reasonable security measures to protect such trade secrets.
4. Support
4.1
‘Principle’ . Barco is under no obligation to provide support in respect of the Software, except as included in a Product Specific EULA and/or the extent you have entered into a separate maintenance agreement. Any unauthorized use of the Software may prohibit Barco from providing such support.
4.2
‘Support policy’ . Barco may provide to you maintenance releases to address bugs or security issues in the
Software and you agree to install the same. Any other updates or upgrades can be obtained under the terms of a separate software maintenance which is being offered to you. You may have a right to downgrade your licensed Software application to (only) such earlier version of the same Software application as agreed by
Barco in the forthcoming case.
Additional functionality may be licensed to you with and subject to additional or different terms.
5. Warranty
EXCEPT FOR THE LIMITED WARRANTY THAT MAY APPLY AS PER THE PRODUCT SPECIFIC EULA,
YOU UNDERSTAND THAT THE SOFTWARE IS BEING PROVIDED TO YOU "AS IS". BARCO DOES NOT
MAKE NOR INTENDS TO MAKE ANY WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED
AND SPECIFICALLY DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NON-INFRINGEMENT OF INTELLECTUAL PROPERTY AND DOES NOT
WARRANT THAT THE SOFTWARE WILL BE FREE FROM ERRORS OR THAT YOU WILL BE ABLE TO
OPERATE THE SOFTWARE WITHOUT INTERRUPTIONS OR THAT SUCH ERRORS WILL BE
CORRECTED BY BARCO. EXCEPT FOR ANY MAINTENANCE AND SUPPORT OBLIGATIONS
SEPARATELY AGREED, YOU ARE SOLELY RESPONSIBLE FOR ALL COSTS AND EXPENSES
ASSOCIATED WITH RECTIFICATION, REPAIR OR DAMAGE CAUSED BY SUCH ERRORS. IN THE
FORTHCOMING CASE, THE WARRANTY DISCLAIMER FOUND IN APPLICABLE OPEN SOURCE
LICENSES SHALL OVERRIDE THE PROVISIONS OF THIS LICENSE AGREEMENT.
6. Compliance and Enforcement
6.1
‘Reporting and Audit’ . In addition to good practice record-keeping obligations, you agree to report the use of the Software and relating billing metrics in the DRM or otherwise as agreed. You grant to Barco and its designated auditors, at Barco’s expenses, the right to verify your Software deployments and to examine your books, records and accounts during your normal business hours so as to verify your compliance with the
License Agreement. In the event such audit discloses non-compliance with your payment obligations hereunder, you shall promptly pay to Barco the appropriate license fees plus the reasonable cost of conducting the audit.
6.2
‘Enforcement’ . Barco shall notify the then known user through the DRM (failing of which, otherwise in writing) of a substantial non-compliance, based on the triggers as per the Product Specific EULA. The noncompliance may result in an immediate or graduate denial of service (i. e. termination of the rights granted
under the License Agreement), in part or in full, all based on the level of severity of the non-compliance [as per the Product Specific EULA].
6.3
‘Indemnification’ . YOU HEREBY AGREE TO INDEMNIFY, DEFEND AND HOLD HARMLESS BARCO
AND BARCO’S AFFILIATES FROM AND AGAINST ANY AND ALL ACTIONS, PROCEEDINGS, LIABILITY,
LOSS, DAMAGES, FEES AND COSTS (INCLUDING ATTORNEY FEES), AND OTHER EXPENSES
INCURRED OR SUFFERED BY BARCO ARISING OUT OF OR IN CONNECTION WITH ANY BREACH BY
YOU OF THE TERMS OF THIS SOFTWARE LICENSE.
7. Limitation of Liability
TO THE MAXIMUM EXTENT PERMITTED BY LAW, BARCO ACCEPTS NO LIABILITY FOR ANY
DAMAGES, LOSSES OR CLAIMS YOU OR ANY THIRD PARTY MAY SUFFER AS A RESULT OF YOUR
USE OF THE SOFTWARE. IN JURISIDCTIONS WHERE BARCO’S LIABILITY CANNOT BE EXCLUDED,
BARCO’S LIABILITY FOR DIRECT DAMAGES SHALL BE LIMITED TO AN AMOUNT OF 250 EURO IN THE
AGREGATE (OR TO THE MAXIMUM EXTENT PERMITTED BY LAW WHERE NO FURTHER EXCLUSION
IS LEGALLY ALLOWED).
TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT WILL BARCO BE LIABLE FOR ANY
INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGES OF ANY KIND
WHICH MAY ARISE OUT OF OR IN CONNECTION WITH THE SOFTWARE, THIS SOFTWARE LICENSE
OR THE PERFORMANCE OR PURPORTED PERFORMANCE OF OR FAILURE IN THE PERFORMANCE
OF BARCO’S OBLIGATIONS UNDER THIS SOFTWARE LICENSE OR FOR ANY ECONOMIC LOSS, LOSS
OF BUSINESS, CONTRACTS, DATA, GOODWILL, PROFITS, TURNOVER, REVENUE, REPUTATION OR
ANY LOSS ARISING FROM WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION OF THE
SOFTWARE AND ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES WHICH MAY ARISE IN
RESPECT OF USE OF THE SOFTWARE, EVEN IF BARCO HAS BEEN ADVISED OF THE POSSIBILITY
OF THEIR OCCURRENCE.
8. Confidentiality
8.1
‘Confidential Information’ . You will be receiving information which is proprietary and confidential to Barco during the negotiation and Term of this License Agreement. “Confidential Information” shall include (i) the underlying logic, source code and concepts of the Software or other trade secrets (the access to which is strictly limited as expressly set out herein), (ii) any information designated as confidential by Barco or which has the necessary quality of confidence about it and (iii) any license key provided by Barco to you hereunder.
8.2
‘Non-Disclosure’ . You agree not to divulge any Confidential Information to any persons without Barco's prior written consent provided that this article 8 shall not extend to information which was rightfully in your possession prior to the commencement of the negotiations leading to this License Agreement, which is already public knowledge or becomes so at a future date (otherwise than as a result of a breach of this article
8), to the extent it is required to be disclosed by law or which is trivial or obvious. You agree not to use any
Confidential Information except for the authorized purpose hereunder. The foregoing obligations as to confidentiality shall survive the Term of this License Agreement.
9. Term and Termination
9.1
‘Term’ . The duration of this License Agreement will be from the date of your acceptance (as set forth above) of the Software (whereby you acknowledge that use of the Software implies acceptance), until you deactivate the Software, discontinue the use of the device on which the Software was first installed for its intended use or the expiration of the limited time period set out in the Product Specific EULA, whichever comes first.
9.2
‘Termination’ . You may terminate this License Agreement at any time by destroying all copies of the
Software then in your possession and returning all Documentation and associated materials, to Barco or the appointed Barco reseller that sold or provided these to you. Barco may terminate this License Agreement, immediately or gradually in accordance with article 6 hereof, by informing you at any time if any user is in breach of any of the License Agreement's terms.
9.3
‘Consequences of Termination’ . All rights associated with the use of the Software and the acquisition of updates and upgrades cease once the contract is terminated or expires. Cancelling your license will stop recurring fees going forward, but will not retroactively refund current or past payments.
10. Other relevant terms
10.1
‘Data Protection’ . Barco may, without restriction, save, process, use and reuse any data obtained in connection with the sales or supply of the Services. Barco shall take suitable technical and organizational measures to protect personal data received against loss and unlawful processing.
10.2
‘Functional Information’ . Via the Software, Barco may gather technical, aggregated and/or statistical information about (i) the functioning and the functionality of the products which are connected through the
Software, and/or (ii) as provided by You or generated by Your use of the Software (“Functional Information”).
Barco and its service providers may process and use such Functional Information for analytics purposes, for developing and improving products and services, offering products and services to Your organization, all based on the legitimate interest of Barco of evaluating the market, assessing and improving its products and conducting research and development. This Section shall survive the term of this Agreement.
10.3
Return of Data . Upon Your request made within 60 days after the termination or expiration of this
Agreement, Barco will make User Data available to You for export or download as provided in the
Documentation. After such 60-day period, Barco shall have no obligation to maintain or provide any User
Data, and as provided in the Documentation will thereafter delete or destroy all copies of User Data in Barco’s systems or otherwise in Barco’s possession or control, unless legally prohibited.
11. Final Clauses
11.1
‘Entire Agreement’ . This License Agreement is the only understanding and agreement between you and
Barco for use of the Software. This License Agreement supersedes all other communications, understandings or agreements we had prior to this License Agreement (with the exception of any continuing confidentiality agreement).
11.2
‘Notices’ . Notices can be validly delivered to the parties’ last known address.
11.3
‘Severability’ . This License Agreement shall not be altered, amended or varied. If any provision of this
License Agreement is determined to be illegal, void or unenforceable, or if any court of competent jurisdiction in any final decision so determines, this License Agreement shall continue in full force save that such provision shall be deemed to be deleted with effect from the date of such decision, or such earlier date, and shall be replaced by a provision which is acceptable by law and which embodies the intention of this License
Agreement a close as possible.
11.4
‘Export’ . You acknowledge that this Software may be subject to U. S. or other governments Export
Jurisdiction. You agree to comply with all applicable international and national laws that apply to the Software, including the U. S. Export Administration Regulations, as well as end-user, end-use, and destination restrictions issued by the U.S. or other governments.
11.5
‘Survival’ . The provisions of articles 3, 5, 6, 7 and 8 will survive the termination of this License Agreement, howsoever caused, but this will not imply or create any continued right to use the Software after termination of this License Agreement.
11.6
‘Assignment’ . Barco shall be entitled to sub-contract all or any of Barco's obligations hereunder to a third party and/or any of Barco's Affiliates.
11.7
‘Law and Jurisdiction’ . The construction, validity and performance of this License Agreement shall be governed in all respects by the laws of Belgium, without recourse to its conflict of law principles. All disputes arising in any way out of or affecting this License Agreement shall be subject to the exclusive jurisdiction of the courts of Kortrijk, without prejudice to enforcement of any judgment or order thereof in any other jurisdiction.
The United Nations Convention on Contracts for the International Sale of Goods (the "Convention") shall not apply to this License Agreement, however, if the Convention is deemed by a court of competent jurisdiction to apply to this License Agreement, Barco shall not be liable for any claimed non-conformance of the Software under Article 35(2) of the Convention.
YOU HEREBY ACKNOWLEDGE TO HAVE READ, UNDERSTOOD AND ACCEPTED TO BE BOUND BY
ALL THE TERMS AND CONDITIONS OF THIS LICENCE AGREEMENT AS INDICATED ABOVE
Barco ClickShare Product Specific Privacy policy
You are controller for personal data which are being processed via the Software. Therefore, you remain solely responsible for complying with all applicable data protection laws and for implementing and maintaining privacy protection and security measures (especially for components that you provide or control). Barco disclaims any liability in this regard. Barco created a specific privacy policy for the ClickShare software application for mobile devices, which describes the processing of personal data via this application ( http:// www.barco.com/en/about-barco/legal/privacy-policy/clickshare-app ).
Via the Software, Barco may gather technical information about (i) the functioning and the functionality of the products which are connected through the Software, and/or (ii) as provided by you or generated by your use of the Software (“Functional Information”). Barco may make use of such Functional Information for purposes of analytics, for developing and improving products and services, offering products and services to your organization and/or allowing third parties to access such Functional Information; based on the legitimate interest of Barco of evaluating the market, assessing and improving its products and conducting research and
development. All knowhow, inventions and works derived by Barco from the Functional Information will be exclusively owned by Barco.
Table of contents
R5900098 /10 CX-30 11
12 R5900098 /10 CX-30
Introduction
R5900098 /10 CX-30 13
1.1 Versions of the product
Regional versions
Depending on the location where you buy the CX-30 product, the Base Unit and accessories are regionalized.
By the time of release of this manual, 6 regional versions of CX-30 are available:
• EU
• US
• NA
• CN
• ZH
• RW
The regional version of your CX-30 cannot be changed. That means that you cannot use it in another region.
For more information on the regional variants, refer to the CX-30 Installation Guide.
Link between Barco product brand name and the model group
CX-30 is a Barco product of the model group C 3010S
1.2 About this guide
About the documentation
This user guide explains the practical use of the CX-30 .
Available System documentation
A printed copy of the Safety Guide is included in the CX-30 box at purchase. Other documentation such as user guide, installation manual and service manual can be downloaded from Barco’s website, www. barco.
com/clickshare .
Depending on the CX-30 version, some graphics might be different to the ones used in this manual.
This however does not have any effect on the functionality.
1.3 Symbols and fonts
Symbol overview
The following icons are used in the manual :
Caution
Warning
Info, term definition. General info about the term
Note: gives extra information about the described subject
Tip: gives extra advice about the described subject
14 R5900098 /10 CX-30
Font overview
• Buttons are indicated in bold, e.g.
OK .
• Menu items are indicated in italic .
• Step related notes, tips, warnings or cautions are printed in italic .
• Procedure related notes, tips, warnings or cautions are printed in bold between 2 lines preceded by the corresponding icon.
R5900098 /10 CX-30 15
16 R5900098 /10 CX-30
Introduction to the
CX-30
R5900098 /10 CX-30 17
2.1 About the CX-30
CX-30 sets
With the Conferencing Button, in seconds, you are automatically connected to cameras, mics, soundbars and any other AV peripherals in the room for a better, more immersive meeting experience. Everything becomes part of your laptop.
This CX-30 not only helps the presenter get the presentation on-screen in a second, but it also allows the other people in the conference to participate more actively. The result is enhanced meeting efficiency and better decision-making.
The set is compatible with any laptop, desktop tablet or smartphone OS. It works with most conferencing platforms and connects instantly with most brands of peripherals (speakers, microphones, webcams, soundbars) when using the Conferencing Button.
At the moment 5 different sets are available on the market. Each set is sold in its specific region and it can only be used in that specific region because of WiFi regulations.
Components CX-30 set
A standard CX-30 set consists of a Base Unit and 2 Conferencing Buttons. Depending on the location where you buy the product, the software of the Base Unit is different. If needed, you can buy additional Conferencing
Buttons and a tray to store the Buttons.
1
2
Image 2–1
1
2
Base Unit
Conferencing Button 2
Accessories included
Depending on the country where you buy the product, the following regionalized accessories are also included in the CX-30 box.
18
2.
Futher called Button
R5900098 /10 CX-30
Products
R9861513xx 3
Contains
• R9861511
• 2 x R9861600D01C
•
•
R9861511
1 x R9861600D01C
Accessories included
• DC adapter with AC clips type
A, C, G, I 4
• Wall mount system
• Printed safety manual
• DC adapter with AC clips type
A, C, G, I
• Wall mount system
• Printed safety manual
R9861600D01C 5
Contact your local sales representative for the correct regional variant to be used in your country.
2.2 About the Base Unit
Base Unit functionality
The Base Unit receives the wireless input from the Buttons and controls the content of the meeting room display and the peripherals connected to the Base Unit (speakers, microphones, webcam and soundbar).
Furthermore, it will send out the content from the camera and/or the echo-cancelling speakerphone towards the Button.
The Base Unit can be put on the meeting room table or mounted on a wall or ceiling. Check the installation guide for instructions on how to install the Base Unit.
3
4
5
1
Image 2–2
3
4
1
2
2
USB Type-A port (USB 2.0)
USB Type-C port (USB 2.0)
Status LED ring
Standby Button
USB ports
Both USB ports, one USB Type-C TM and one USB Type-A, are used to connect a touch screen, USB camera or USB echo-cancelling speakerphone to the Base Unit. Additionally the USB Type-C TM port is also used to pair the Buttons when not done via XMS. Both ports can be used to update the Base Unit firmware also when not done via XMS.
When plugging in the Button into the Base Unit, the Button is paired to the Base Unit. The Base Unit checks whether the software and firmware of the Button is up to date. If not, the Base Unit updates the software and/ or firmware.
3.
xx=EU, CN, NA, US, ZH, RW,
4.
Included AC clips can be different according to the region
5.
For US, R9861600D01CUS
R5900098 /10 CX-30 19
The use of a convertor is sometimes necessary to connect to one of these ports.
Status LED ring
The color of the LED ring around the power button of the Base Unit give information on the status of the system.
LEDs behavior static red blinking white breathing white static white red blinking dark
Explanation
• receiving content from the Button and streaming towards the display.
• during the first phase of the Base Unit boot process.
• system is starting up (during the second phase)
• Button pairing is in progress
• software update of the Base Unit
• ECO standby mode
• awake and ready (i.e. showing the welcome message on the display)
• pairing and software update of the Button is done, you can now unplug the Button from the Base Unit..
• an error occurred
• deep standby/off
Power button
The button on top of the Base Unit has a standby function once the Base Unit is powered.
• When the system is in normal operational mode, a push makes the system goes into a pre-defined standby mode.
• When the system is in standby, a push triggers the system to start up and it goes into normal operational mode.
2.3 About the Button
Button layout
A Button consists of five main components
1
4
3
2
5
Image 2–3
1
2
3
USB Type-C TM connector
Quick access button
Button
20 R5900098 /10 CX-30
static white static red red blinking off (no light)
4
5
LED ring
Strap hole
USB connector
Using the USB connector the Button can be plugged into a laptop (for sharing your screen) or the Base Unit
(for pairing the Button to the Base Unit or updating its software). Button R9861600D1C has a USB Type-C TM connector. Depending on the type of USB port on your laptop or on the Base Unit a convertor must be used.
Button
By inserting the Button, the peripherals attached to the Base Unit can be used in the tool of your preference.
Click the Button to display the content of the laptop's screen on the meeting room display. Clicking the Button during the meeting will toggle the sharing of the screen. Click the small button to get additional functionality and controls.
LED ring
The LED ring indicates the current status of your ClickShare.
LEDs behavior white ring filling up
Explanation
• Button is plugged in the laptop and initializing.
• Button is updating/pairing green ring • pairing and software update is done. You can now unplug the
Button from the Base Unit.
spinning white circle • Button is busy (no end time known).
• ClickShare App is setting up the connection with the Base Unit.
white blinking
• the Button is waiting for the user to start the ClickShare application.
• ClickShare is ready to start sharing your screen.
• sharing your screen with the display 6 .
• an error occurred.
• the Button is not or not properly inserted into the USB port.
• the Button might be defective.
• the USB port or computer might be defective.
2.4 Mobile Device Support
Overview
The below list of Apps are supported by ClickShare and can be installed on your mobile device from Google
Play or Apple App Store. Or can be installed on your Windows or Mac pc
6.
While sharing content, the laptop will not go to standby. Once sharing is stopped, the laptop will again be capable of going to standly.
R5900098 /10 CX-30 21
Before you can use your mobile device with ClickShare, you have to connect the mobile device Wi-Fi with the
ClickShare Base Unit Wi-Fi. Follow the instructions as given in your mobile device user guide. Or connect the
Base Unit to the network, then you do not need to switch your Wi-Fi.
App
ClickShare App
Used on iOS
Android
Windows
Mac OS
Apps can be downloaded from www.clickshare.app
.
22 R5900098 /10 CX-30
Getting started
R5900098 /10 CX-30 23
3.1 Activating the Base Unit
About power mode
The Base Unit is powered via an external power adapter. Once connected, the Base Unit is automatically switched in standby mode. For more information about power connection, see CX-30's installation manual.
Standby button
1.
Push the button shortly.
Image 3–1
When the Base Unit was on, it goes to standby.
When the Base Unit was in standby, it starts up.
3.2 Basic Use, with Button
Basic functionality
When entering a meeting room equipped with ClickShare and if the display is not in screensaver mode, the
ClickShare wallpaper is shown on the display. The content of the wallpaper depends on the setup. Connected peripherals to the Base Unit and their status are indicated on the wallpaper.
Starting to use ClickShare is now very simple.
To start using CX-30 with a Button
1.
Take a Button and insert the Button into a USB port of your laptop. Depending on the USB port on your laptop a convertor must be used. This convertor is not delivered by Barco.
24
Image 3–2
In the meanwhile
The white ring on the Button is filling up. When totally filled up it goes to static white and is ready to share or it starts blinking to indicate that you have to start clickshare.exe on your computer.
R5900098 /10 CX-30
On your laptop a new drive appears.
Different situations are possible now:
• Nothing installed, LED ring fills up and starts flashing, indicating that the executable needs to be started by the user. Double-click the ClickShare application.
• For Windows environment: when connected to internet, driver will be installed and the executable will be started by the driver.
• For Mac environment: CD-ROM drive will appear, open it and launch the application to get started.
• A launcher or the ClickShare desktop app is preinstalled on your laptop (downloaded from the Base
Unit or Barco website, or deployed company-wide by your IT department). ClickShare is immediately available.
In the meanwhile a Preparing the meeting room...
window is displayed.
Image 3–3
2.
The application is started
When the system is ready for use, the share window appears with the message Ready to share to
<ClickShare name>
Image 3–4
The LEDs of the Button are static white.
The peripherals such as USB camera, echo cancelling audio device, etc. can now be used in the tool of your preference on your device.
Your screen or a typical application can be shared.
R5900098 /10 CX-30 25
3.
There are now 2 ways to start sharing:
• by clicking on the Button.
• by clickin on your screen or application in the app window.
When clicking on the Button, the LEDs of the Button become static red and your display is shared.
When selecting in the app, your choice will be shared.
When audio is enabled on the ClickShare Base Unit, the audio of your laptop is also available on the audio output of the Base Unit, and it will be played via the meeting room audio system.
When a USB echo cancelling audio device is connected to the Base Unit, all audio, content audio and speaker audio is played via the speakerphone system.
A pauze and stop sharing indication is mode in the app window and the window will be minimized.
Image 3–5
ClickShare automatically scales the content of your screen/application to the resolution of the meeting room display. The aspect ratio of your screen is maintained to make sure the proportions are correct.
4.
To freeze the content on the screen while you look up something on your PC, just click on freeze icon
(reference 1) in the shared window. The icon will change to a release icon.
To resume the content sharing, click on that release icon.
2 1
Image 3–6
5.
To remove your content from the display, click the Button again or click on the stop sharing icon (reference
2 on
) in the app window.
The LEDs of the Button become static white.
6.
When leaving the meeting room, unplug the Button from your laptop or click on the exit icon on the upper left corner.
26 R5900098 /10 CX-30
When there was no installation when starting with the Button, no trace of the ClickShare application is left on your laptop.
As second user can replace the current presenter with a long press on his Button.
Use in a fully equipped conference room
When connecting with the Button, it allows you to connect the room speakerphone, microphone and camera wireless to your laptop and use the better equipment of the room in your video conferencing call.
Icons on the wallpaper indicate the availability and status of the peripherals in the room. When one of them is not attached to the Base Unit allowing to create an audio only meeting room or a video only meeting room, the corresponding icon will not be shown on the wallpaper.
A
1
B
2 3 4
C
5 6 7
Image 3–7
A No peripherals attached, local view active
B Camera and speakerphone attached, only local view
C Camera and speakerphone attached and active, local view active
1 Local view active
2 Camera connected, not active
3 Speakerphone connected, not active
4 Local view active
5 Camera connected and active
6 Speakerphone connected and active, not muted.
7 Local view active
The state of the peripheral icons on the wallpaper are in sync with the peripherals.
When the microphone is muted, it is guaranteed that no sound is going through the system. A muted microphone is indicated by a microphone icon with dash through the icon.
Available conferencing capabilities when Button plugged in
When not sharing content
Camera and speakerphone can be used from the moment the Button is inserted and initialized. The person hosting the call does not need to be on screen for this to work (he does not even need to start the ClickShare application). This is useful especially when others are sharing in the room and the host shares the room display via local view or when you use the peripherals for e.g recording.
When sharing content (big button pressed)
Only when the big Button is pressed, the screensharing is started. Screen content and content audio are transmitted to the main display. When the user stops sharing, you return to the Button inserted state. Call continues without interruption.
R5900098 /10 CX-30 27
Button used in a conference room
When plugging in the button, a quick start guide for conferencing capabilities is shown. It shows what should happens before you can fully use the conference capabilities.
Image 3–8
Quick access button
This quick access button opens a selection window to make the choice what will be displayed on the screen.
Image 3–9
Examples of some choices are:
• View the room display
• Start video
• Mute micro
3.3 Basic Use, with ClickShare desktop app
About the ClickShare desktop app
With the ClickShare desktop app installed on your computer you can enter a meeting room and get on the screen in a few seconds.
The ClickShare desktop app connects to the meeting room screen in order to share your content. Presence detection technology is used to do so. The ClickShare desktop app uses Wi-Fi beacons and an inaudible audio signal to detect the most nearby meeting rooms and show a list of maximum 5 most nearby meeting rooms, sorted based on signal strength on your computer. Just click on your meeting room name. This means you will never have to enter IP addresses or scroll long lists of meeting rooms before being connected to your meeting room.
The ClickShare desktop app can be used with or without a Button.
ClickShare desktop app installation
When the ClickShare desktop app is not pre-deployed in your IT environment, you can download and install the software without administrator rights from www.clickshare.app
.
How to use
1.
Enter a meeting room.
28 R5900098 /10 CX-30
The ClickShare desktop app will list up to 5 most nearby meeting rooms and sort them based on the signal strength.
Image 3–10 Meeting room list
2.
Click on the desired meeting room.
If the use of a pin is enabled on the Base Unit, the ClickShare desktop app will prompt you to enter the pin that is shown on the meeting room screen. An indication where to find the pin code on the screen is given in the desktop app and indicated with a red arrow.
Enabling the pin on the Base Unit (this can be done in the ClickShare Configurator) provides an additional layer of security. This way you will never share your content to the wrong meeting room screen.
Image 3–11 Enter pin
After having entered the pin, the ClickShare desktop app will connect to the meeting room.
R5900098 /10 CX-30 29
Image 3–12 Ready to share
3.
Start sharing a display or a window. Click on the desired object you want to share.
Image 3–13
When the sharing is started, a stop sharing and pauze icon is added on the shared window and the
ClickShare desktop app will minimize after a while.
Click on the minimized icon to open the full interface of the ClickShare app.to
• either pause your sharing session (freeze the content) on the screen while you work on your laptop
(invisible for people in the meeting room). Click on the pauze icon (reference 1).
• stop sharing. Click on the stop sharing icon (reference 2).
4.
Disconnect from the meeting room by clicking the “leave room” icon on the upper left corner.
or when you walk away from the meeting room the app will show a message indicating you probably left the meeting room and you are still connected to the screen.
30 R5900098 /10 CX-30
ClickShare Desktop app in a conference room
With just one click in the ClickShare App you join the next virtual meeting on your agenda. Your Outlook calendar automatically synchronizes with the ClickShare Collaboration App. The next Microsoft Teams meeting on your agenda is shown in the ClickShare App: join that call with just one click, your Teams App will open automatically and your call will start immediately. The same is true for your Zoom, Webex or other calls as well.
One click to share your content. Start sharing content in a Microsoft Teams, Zoom or Webex call and
ClickShare automatically shares the same content to the meeting room display.
For more info about calendar integration, see
“ClickShare Desktop App Calendar”, page 31 .
Joining a conference
When using Outlook for creating appointments or invites, you will get an immediate overview in the ClickShare
Desktop app of your next meetings.
Just click to join your next call whether in Teams, Zoom or WebEx. The appropriate application will open automatically.
Image 3–14
3.4 ClickShare Desktop App Calendar
About calendar
Once the ClickShare Desktop App is installed, it will show you the upcoming and ongoing meetings you can join, based on your personal calendar. Depending on the type of meeting and its location information, you'll be able to connect to the meeting room and/or join the conference call linked to the meeting with one click.
By default, the One-Click Join experience is enabled and the ClickShare Desktop App connects to the
Microsoft Outlook client running on your computer to retrieve the relevant meeting information. It does this within the active Windows session and only displays limited meeting information in the App. No meeting information is stored on your computer or processed anywhere else.
Enabling or disabling the integration
1.
Open the ClickShare Desktop App.
2.
Click on the menu icon on the right top to open the menu.
R5900098 /10 CX-30 31
Image 3–15
3.
Click on the Settings .
Image 3–16
4.
Change the toggle next to calendar integration.
To the right: calendar integrated (default value)
To the left: calendar not integrated
Note: a restart of the ClickShare Desktop App is required after re-enabling the calendar integration.
3.5 Calender integration
Calender integration in the Base Unit can only be done in XMS cloud.
32 R5900098 /10 CX-30
About the calender view
Only in combination with Microsoft Office 365, the wall paper shows if a meeting room is available or not.
Image 3–17
When available, it is indicated with a green banner with the indication until when it is available.
Image 3–18
When it is occupied is indicated with a red banner with the indication until when the room is book and by who the room is booked.
Image 3–19
3.6 Walk in and connect with ClickShare
PresentSense
TM
Introduction
PresentSense makes seamless connection to the room’s Base Unit possible as soon as you wak into the room. The ClickShare desktop app on you PC detects the Base Unit in the room and asks you to click Connect to connect to the room’s Base Unit. There is no longer need to search through a list of nearby meeting rooms.
ClickShare PresentSense requires version 4.5 or higher of the ClickShare desktop app to be installed on your computer.
This function is only available for Windows TM.
How it works
The ClickShare Base Unit in the meeting room sends out an ultrasound signal, that is picked up by the
ClickShare Desktop App through your devices' microphone. Because of the characteristics of sound, that signal will only be available within the meeting room, ensuring you're in the room when the App picks up the signal.
Because ClickShare PresentSense uses your devices' microphone to detect the ultrasound signal you will need to allow the ClickShare Desktop App to use the microphone before it can start detecting the
PresentSense signal.
How to allow the use of your microphone
1.
Open your ClickShare Desktop App and click on the menu item.
R5900098 /10 CX-30 33
Image 3–20
2.
Click on Settings .
3.
Toggle the ClickShare PresentSense to the right to activate.
Image 3–21
Back ground color of the toggle becomes blue.
You can revoke this permission at any time by sliding the toggle to the left.
Entering a meeting room
1.
Step in a meeting room with ClickShare PresentSense active in the meeting room and in your desktop app.
2.
A popup message appears on your screen.
34 R5900098 /10 CX-30
Image 3–22
3.
Click Connect .
Your will be automatically connected to meeting’s room Base Unit.
Note: You may be asked to type in the pincode when multiple people walk in and connect at the same time.
Whenever the microphone is in use by ClickShare PresentSense, this is clearly visible in the Windows system tray. By hovering over the microphone icon, you can see which app is using the microphone.
Image 3–23
Walk in without PresentSense active on your desktop app
1.
Walk in a meeting room that is sending out the ClickShare PresetSense signal and start sharing content.
A popup message will be displayed to allow access to your microphone.
Image 3–24
You have now 2 choices:
• Allow: allow to access your microphone and the ClickShare PresetSense function will be enabled when stop sharing. By a next walk in the connection with the Base Unit will done automatically.
• Maybe later: the PresentSense function will not be activated. Next time the popup will be displayed again.
2.
Make your choice and click on the corresponding button.
R5900098 /10 CX-30 35
3.7 App based conferencing
About app based conferencing
App-based Conferencing enables you to use the meeting room camera and speakerphone as soon as you're connected to the room with the ClickShare Desktop App.
With this, the ClickShare Desktop App enables you to join your Zoom, WebEx, or Microsoft Teams calls in a single click, and to use the room camera and speakerphone in that call without needing to plug in a Button.
App-based Conferencing requires version 4.15 or higher of the ClickShare Desktop App, installed through the MSI installer, with the App-based Conferencing feature enabled. Installation can only be done with administrator rights on your computer. Contact your IT administrator to install or deploy it for you.
How it works
1.
Click on the ClickShare icon to open the ClickShare Desktop App
Select the meeting room out of the displayed list of nearby meeting rooms.
Connect to the meeting room.
or when the PresentSense function is active in that meeting room and on your PC, just walk in and click
Connect to get started.
As soon as you are connected to the room, the meeting room peripherals (camera, microphone, and speaker) become available on your computer and are ready to use in your video call.
Image 3–25
2.
At the end of the meeting, simply disconnect from the meeting room or walk out and the devices will disappear from your computer.
3.8 User Interface
User Interface functionality
When a Button is plugged in or the ClickShare desktop app is running and ready for sharing (not sharing yet), additional functionality (context menu) can be selected via the hamburger menu icon.
36 R5900098 /10 CX-30
Context menu
1.
Click on the menu icon on the Ready to share message.
Image 3–26
The context menu appears.
2.
From the list, click the action you want to perform.
3.9 Extended desktop
About extended desktop
Depending on your selection, your primary screen or your extended screen will be captured and displayed via
ClickShare. That extended screen can be a physical screen or a virtual screen.
The use of the extended desktop functionality does require the extension pack to be installed on your device.
More information on the extension pack can be found on the ClickShare Extension pack product page ( https:// www.barco.com/en/product/clickshare-extension-pack ).
With extended desktop you can take advantage of both your laptop screen and the central meeting room display. Presentation notes or other material on primary screen will not be displayed to everyone (so-called
PowerPoint Presenter mode) or when you want to take notes whilst sharing something else..
Note that the Presenter mode can also be achieved without the use of the extended desktop and one can also choose to share only the application you wish to share in the room via the sharing mode toggle (see
“Share an application”, page 38 ).
PC with virtual extended screen:
2
1
Image 3–27
Primary screen displayed on the PC, extended screen displayed on the meeting room display.
R5900098 /10 CX-30 37
2
2
1
Image 3–28
PC with one extended screen connected. That extended screen will be captured and displayed on the meeting room display.
3
2 2
1
Image 3–29
PC with two extended screens connected. The first extended screen, screen 2 will always be captured and displayed on the meeting room display.
How to select
1.
Click on the menu icon of the Ready to share message.
Image 3–30
The content menu opens.
2.
Check the check box before Extended desktop.
3.10 Share an application
About sharing an application
When Share an application is selected, you will be presented with an overview of open applications on your computer. Once you select an application to share, only this application will be shared on the big screen
38 R5900098 /10 CX-30
How to select via the application window
1.
When a Button is plugged in or the ClickShare desktop app is ready to share..
Image 3–31 Ready to share
The last 6 open applications on your computer are displayed.
Image 3–32
2.
Click on the application to share. A red square indicates the selection.
Only the selected application is shared on the meeting room display.
Via the Quick access button
1.
Push the quick access button and click on the share an application icon.
R5900098 /10 CX-30 39
Image 3–33
2.
To display an application, select Share an Application .
The last 6 open applications on your computer are displayed.
Image 3–34
3.
Click on the application to share. A red square indicates the selection.
Only the selected application is shared on the meeting room display.
3.11 Microsoft Office PowerPoint Presenter mode
Overview
To view your speaker notes on your pc when sharing a presentation on the room display, one can make use of the PowerPoint Presenter mode functionality in Microsoft Office PowerPoint without the need for a second
(virtual) display.
When sharing a Slide Show using Share an application you will be reminded of the Presenter Mode functionality through a useful notification. This notification remains on screen for 10 seconds and is only shown the first five times your share a Slide Show.
40 R5900098 /10 CX-30
Image 3–35
Presenter mode on Windows
1.
Open your PowerPoint and start your Slide Show. This will show your presentation full screen on your PC.
2.
With a Button plugged in or the ClickShare app ready to share, select Share an application from the hamburger menu.
An overview of the current available application on your laptop will be displayed.
3.
Select the PowerPoint Slide Show to share to the meeting room display.
4.
On the full screen presentation, right-click on the slide and select Show Presenter View to see speaker notes while sharing the Slide Show to the meeting room display
Presenter mode on macOS
1.
Open your PowerPoint and start your Slide Show
2.
With a Button plugged in or the ClickShare app ready to share, select Share an application from the hamburger menu.
An overview of the current available application on your laptop will be displayed.
3.
Select the PowerPoint Slide Show to share to the meeting room display
4.
Right-click on the slide and select Use Presenter View to see speaker notes while sharing the Slide Show to the meeting room display
3.12 View room display
About view room display
When connected to a Base Unit, you can access the content which is shown on the meeting room display by selecting View room display . When doing so, a new window will open in which you will find an exact copy of what is on the meeting room display. This is useful when e. g. sitting in the back of the room, when you are taking meeting notes or when you wish to share what is shown in the room (by yourself or others) to remote participants in a UC&C call.
How to view
1.
With a Button plugged in or the ClickShare desktop app ready, click on the hamburger menu and select
View room display.
Image 3–36
The content of the meeting room display is transferred to a new window on your laptop. A red eye will be shown at the bottom left on the meeting room display splash screen.
R5900098 /10 CX-30 41
Image 3–37
3.13 Stop sharing and leave
With the ClickShare desktop app
When your meeting has come to an end, stop sharing by hovering over the red bar to expand the interface and clicking the full red circle.
Disconnect from the meeting room by either clicking the “leave room” icon (see below) or by simply closing your laptop.
Image 3–38 Leave meeting room
With a Button
Click the Button and unplug the Button from your laptop.
3.14 Audio configuration
Audio configuration
The connected user must control his own audio signal using the audio configuration of his computer. If he does not want to broadcast his audio signal, he has to mute audio on his computer.
For some operating system, it is necessary to set ClickShare as your default output device. Once you unplug the Button, the default setting is switched back to the previous setting. The speakerphone selection is also selected.
Audio configuration
The following configuration is the expected configuration for the playback devices when plugging the Button.
ClickShare speaker as default device and room speakerphone as default communications device.
The speakerphone is available and can be used even when not on screen. The sound coming out of the speaker is only heard when sharing content. With this defaults, the content audio will be played by the speakers and communication clients (UC&C and conferencing tools) will use the room speakerphone. For best experience, the room speakerphone should be selected in the communications client at all times.
Difference is that the audio from the Speakers will be lip-synced with the content, but will have higher latency.
42 R5900098 /10 CX-30
The communications device is optimized for the lowest latency possible, but no lip-sync is guaranteed with the video. For an optimal conference, the audio should always be transferred with lowest latency possible and will get priority over video.
Image 3–39 Audio setup
3.15 Pairing
Pairing of the Buttons with the Base Unit
To be able to use a Button it should be assigned to the Base Unit you are using. This process is called pairing.
All Buttons will need to be updated and paired before use.
In case you buy additional Buttons or when a Button should be assigned to another Base Unit, the Button needs to be paired (again). The Button software update runs in the background and will not impact users while using the system. When downgrading or updating to an older version of the Base Unit software the Button need to paired manually to update their software.
A Button can only be paired to one Base Unit at a time.
The Button will always make connection to the Base Unit it was last paired to.
Pairing a Button can be done in two ways:
• by plugging the Button to the Base Unit.
• by using the Button Manager application running on your laptop.
To pair a Button to the Base Unit by plugging in
1.
Insert the Button in the USB type-C TM port available on the Base Unit you are using.
R5900098 /10 CX-30 43
Image 3–40 Pair Button
The Base Unit LED is blinking while the Button LED fills up a circle. This means pairing is in progress.
The Base Unit automatically checks whether the software of the Button is up to date. If not, the Base Unit updates the Button software. This may take more time.
The result of the pairing process can be as follows:
• When the LEDs on the Button become green and static white on the Base Unit, the Button is paired to the Base Unit. You can unplug the Button from the Base Unit.
2.
Unplug the Button from the Base Unit.
The Button is now ready for use.
Image 3–41
3.16 Blackboarding & Annotation
About blackboarding
Blackboarding allows you to use the meeting room’s touchscreen as a writing board to write or sketch ideas on. Let creativity flow and have more dynamic meetings. With only one tap on the screen, you can save your real-time brainstorming session and share a copy with all meeting participants connected to the ClickShare
Base Unit via the Button or via the ClickShare Desktop App.
With only one tap on the touch screen, you can select the blackboarding functionality. Combining a touch display and a wireless collaboration tool drives the productivity and engagement in your meeting room. With an additional tap on the screen, you can select the 'save' option. Saved sessions can be found on your laptop under c: \Users \username \Documents \clickshare-downloads. Files are never saved on the Button or Base
Unit.
About annotation
Annotation gives you the option to add comments directly on presented content via the meeting room’s touchscreen. Discuss and make your annotations or notes on the spot, creating an elaborated environment for ideation. With only one tap on the screen, you can save your real-time brainstorming session and share a copy with all meeting participants connected to the ClickShare Base Unit via the Button or via the ClickShare
Desktop App.
With only one tap on the touch screen, you can select the annotation functionality. Pick your color and you can start to draw, write, highlight. Combining a touch display and a wireless collaboration tool drives the productivity and engagement in your meeting room. With an additional tap on the screen, you can select the
'save' option. Saved annotations can be found on your laptop under c: \Users \username \Documents
\clickshare-downloads. Files are never saved on the Button or Base Unit.
44 R5900098 /10 CX-30
3.16.1 Start the blackboarding or annotation mode
How to start
1.
Click on the blackboarding icon in the permanent bar (1).
2 1 3
Image 3–42
The selection menu with Blackboard and Annotation opens on the current presented content. When nothing is shared, only Blackboard will be available in the menu.
2.
To start annotation, click on the annotation icon in the permanent bar (2)
No clients should be disconnected. The current shared screen(s) will be captured and used as background. No previous content can be shown again.
3.16.2 Drawing tools
Pen
Click on the Pen icon (3) to start the drawing functionality. Draw with you finger on the screen.
2 1 3
Image 3–43
Erase
Click on the Erase icon (2) to start the erase functionality. Erasing can be done with single finger or with multiple fingers. The eraser grows in size depending on the speed of the movement. The erased parts are indicated with a circular overlay.
R5900098 /10 CX-30 45
1 2 3 4
Image 3–44
Color
Allows you to switch between the different pen colors (1). The default color is red.
Tap on the Color icon to change the drawing color.
• black
• red
• blue
• green
Tap on the desired color to change the pen color. The current select color in the toolbar will change to the new selection. The current selected is highlighted.
Clear
Click on the Clear icon (3) to clear the current drawing. A warning message “Are you sure you want to clear the page?” will be displayed.
Click on OK to clear the content.
Click on Cancel to keep the content.
3.16.3 Saving a drawing on a USB stick
How to save
1.
Insert a USB stick in one of the USB inputs of the Base Unit.
Note: USB stick must be formatted with FAT32.
2.
Click on Save icon (reference 4,
).
The current drawing is saved on the USB stick as PDF with as file name the meeting room name and current date.
When saving a blackboard drawing, the white and the black lines are inverted. The white annotations become black and the black annotations become white.
3.16.4 Saving a drawing to connected clients
How to save
1.
Click on Save icon (reference 4,
).
The Base Unit checks whether there are Buttons connected.
The connected client will receive a pop-up message requesting to save the file on his device.
2.
Accept the blackboard file.
46 R5900098 /10 CX-30
The Base Unit will transfer the file to the Button client and the file will be saved on the user's device within the user's home folder. The file will be saved as a PDF file with as file name the meeting room and current date.
When there is also an USB stick (FAT32 formatted) inserted in the Base Unit, the file will be saved on this USB stick at the same time.
3.16.5 Returning to Presenter mode
How to return
1.
Click on the Close (Cross) button in the lower right corner.
The Base Unit returns to Presenter mode.
The content of the Blackboard is not cleared. When returning to the blackboarding mode, the previous content will be displayed.
The content of the Annotation mode is cleared and cannot be reused when restarting the annotation mode.
3.17 Touch Back
About Touch Back
Touch Back support on your wireless collaboration solution allows you to control any application on your laptop via the touch screen in the room, instead of using a computer mouse or clickers. You can control data with your finger or with a specified stylus. Stay in control of your presentation, and don’t let technical limitations interrupt the flow of your meeting anymore.
No need to go back to your laptop or use unreliable clickers to move to the next slide. Simply tap the screen to switch slides. And with a few touches on the screen, you can also open other presentations, share mails or start a video. With one tap on a touch screen, you can also select the blackboarding or annotation functionality. The combination of a touch display and a wireless collaboration tool drives the productivity and engagement in your meeting room.
• It gives you the opportunity to present more freely within the meeting space
• You can start to ideate on content real-time.
• Collaborate more interactive and creatively.
• Get higher engagement from the participants.
• Technical limitations of the room are not hindering the flow of the presentation or meeting.
• It boosts spontaneous collaboration, giving people the opportunity to use the specific extras like easy access to online content, cloud drives or photos, zoom, annotate, blackboarding…
What you need to use Touch Back
• You need a Button successfully paired and updated with the corresponding Base Unit.
• A supported touch panel display. A list of supported displays is listed on Barco’s website in “The
ClickShare Supported Touch Panels Whitepaper” .
How to use Touch Back
• Tap once to control your laptop instead of using the computer mouse.
• To right-click, the touchscreen needs to be pressed for about 2-3 seconds long.
• Touchback can be enabled/disabled by touching the icon on the bottom right on the meeting room display
Points to know
• The best performance is achieved by sharing without audio.
• When sharing the extended desktop, a small lag might be observed.
• Native touchscreen functionalities cannot be used in combination with Touch Back. Ideally, they need to be disabled.
R5900098 /10 CX-30 47
• You can disable touch back when presenting by clicking the touch back icon in the permanent bar at the bottom of the display.
3.18 Room Dock
About
Room Dock allows to create a wireless bridge for echo-cancelling speakphone and USB camera attached to the Base Unit. This allows the user to take advantage of the installed meeting room peripherals to have better audio and video conferencing using their typical videoconferencing tools like Skype or Zoom.
The echo-cancelling speakerphone and USB camera is accessible to any user that has a Button plugged in or a ClickShare desktop app installed..
3.19 Airplay
About Airplay
Airplay is a protocol that allows wireless streaming between devices of audio, video, device screens and photos. The ClickShare Base Unit can be configured to receive the airplay streaming
Why Airplay
You want to show multiple people your photos and videos or your PowerPoint and Keynote presentation on a big screen? Connect your device to the ClickShare Base Unit which can be configured to receive the Airplay streaming.
How to use Airplay
1. Make sure your device is connected with the ClickShare WiFi in the meeting room.
2. Open the control panel of your device and swipe up from the bottom left of the screen or swipe down from the top right of the screen, depending of your device.
3. Click on Synchronise display and select the ClickShare device in the meeting room.
For more information about using Airplay with a typical device, consult the user manual of that device.
3.20 Chromecast
About Chromecast
Chromecast is a protocol that allows wireless streaming between devices of audio, video, device screens and photos. The ClickShare Base Unit can be configured to receive the Chromecast streaming.
Why Chromecast
You want to show multiple people your photos and videos or your PowerPoint and Keynote presentation on a big screen? Connect your device to the ClickShare Base Unit which can be configured to receive the
Chromecast streaming.
How to use Chromecast
1. Make sure your device is connected with the ClickShare WiFi in the meeting room.
2. Click on the cast-icon to display the content of you device on the meeting room screen.
For more information about using Chromecast with a typical device, consult the user manual of that device.
48 R5900098 /10 CX-30
3.21 Miracast
About Miracast
Miracast enables seamless display of multimedia content between Miracast devices. Miracast allows users to wireless share multimedia, including high-resolution pictures and high-definition (HD) video content between
Wi-Fi devices, even if a Wi-Fi network is not available. Miracast creates its own direct wireless signal between your mobile device and the wireless display receiver (ClickShare Base Unit).
How to use Miracast
1. Miracast should be enabled on the ClickShare Base Unit.
2. Your mobile device needs to be Miracast enabled. Devices like Samsung smartphones or other Android phones, as well as devices that use Windows 8 or 10, typically have the technology built-in.
3. In the settings of your mobile device, open ‘wireless display’ (name can be different depending on the device type and model). See the device’s user guide.
4. Select the ClickShare Base Unit in the meeting room.
R5900098 /10 CX-30 49
50 R5900098 /10 CX-30
Troubleshooting
R5900098 /10 CX-30 51
4.1 Basic troubleshooting
Problem solving
In this chapter some problems that might occur while using CX-30 are listed. For each problem possible causes are given and a solution is proposed. If you cannot solve the problem yourself, please contact your local IT administrator.
Generic issues
Problem
Your screen is not shown on the display when pressing the Button.
Cause
Wrong input is selected on the display.
Solution
Select the correct input on the display or on the room control system
Base Unit in standby
You are the third person that wants to share the content to the display.
The ClickShare client software is not running.
Briefly push the standby button on the Base Unit or plug in a Button and run the ClickShare client software.
The first or second user has to push his button to remove his content so that a third user can share his content. or
As third user, click and hold the
Button to use the Show me function of ClickShare.
Go to the ClickShare drive and run the software.
Your screen is shown, but your audio is not playing on the meeting room audio system
Your audio signal on your PC is muted
Audio system of the meeting room is not switched on
When using separate audio, audio cable is not connected
Right click on the speaker icon and switch off the mute.
Switch on the audio system of the meeting room.
Check audio connection between the Base Unit (audio out, green connector) and the audio system of the meeting room.
Your content is removed from the display and the LEDs of your
Button are blinking white.
Nothing is shown on the display at all.
.
Default speaker is not correctly set With a Button inserted, set
ClickShare speaker as your default speaker.
Re-pair the buttons.
Buttons are not re-paired after changing the audio setting on the web interface
Audio setting on the web interface is not correctly set.
Connection to the Base Unit has been lost.
The display is switched off.
Wrong input is selected.
Consult your administrator to select the correct audio setting.
ClickShare tries to restore the connection automatically. If this fails, the LEDs of the Button start blinking red. You should unplug the Button from your laptop and start a new.
Switch on the display.
Select the correct input.
The display cable is not connected
(correctly).
(Re)insert the display cable to the display and the Base Unit.
52 R5900098 /10 CX-30
Problem
After inserting the Button into your laptop, you cannot find the
ClickShare drive.
Some programs of Windows are not shown on the display.
Cause
The display does not recognize or is not able to display the Base Unit output resolution.
Solution
You or an administrator should change the corresponding setting via the web interface.
The Base Unit is in standby mode.
Briefly push the standby button on the Base Unit or plug in a Button and run the ClickShare client software.
The Base Unit is powered off.
Check if power adapter is connected to the Base unit and to the wall outlet.
Wallpaper is disabled
No automatic refresh of drives.
If you connect a Button and start sharing, the content should be shown.
Refresh the view on your laptop.
Bad connection at USB port on laptop.
•
•
Reconnect to the USB port.
Try another USB port.
• Reboot your laptop.
Windows tries to assign the
ClickShare drive to an already reserved drive letter
IT policy not mount USB drives
Use of overlays, 3D or hardware acceleration in the GPU.
Use Microsoft Windows Disk
Management to assign it to a free drive letter.
Contact your IT responsible.
• Disable overlays or hardware acceleration in the GPU.
• Disable AeroGlass in Windows
7
• Capture mode
Issues related to first time use and updating
Problem
Ethernet cable is inserted, but the
Base Unit does not receive an IP address
Update server not reachable
Cause
Fixed IP address not configured.
802.X authentication required
Buttons do not connect after first time installation
Unable to connect to internet
Solution
Contact your IT responsible
Proxy server to be configured.
Firewall is blocking the connection
Buttons not paired
No internet available at the customer’s site
Contact your IT responsible
Please pair the Buttons by plugging them into the USB ports of the Base Unit. Manual pairing only needs to be done once, after this, the Buttons will be automatically updated when updating the Base Unit
Contact your IT responsible
Issues related to screen sharing (video/screen sharing)
Problem
After inserting the Button into your laptop, you cannot find the
ClickShare drive.
Cause
Bad connection at USB port on laptop
Solution
Reconnect to the USB port, try another USB port, or reboot your laptop.
R5900098 /10 CX-30 53
Problem
I cannot start the ClickShare App
Button LEDs are blinking
Screen is not shown when pressing the Button although
Button LED is static white.
Your shared content becomes grayed out.
Button cannot connect to the Base
Unit. Button LEDs keep spinning.
When network integrated, the
Button cannot find the Base Unit.
Quality of the image displayed is not satisfactory.
Cause
Windows tries to assign the
ClickShare drive to an already reserved drive letter
Bad block on the mass storage
Running 3rd party applications is blocked by IT
You are using a Linux PC or
ChromeBook
Clickshare Application has not been started
Already two people on screen
Somebody is moderating the session
Connection between the
ClickShare application (or Button) and the Base Unit is lost
Solution
Use Microsoft Windows Disk
Management to assign it to a free drive letter.
Please re-pair the Button with the
Base Unit to restore the flash
Contact your IT responsible.
In the meantime, you can share your screen using your device’s native protocols
Use the device’s native protocols to share on screen
Start the application on the
ClickShare Button’s mass storage or download and run the
ClickShare Desktop App.
Long press the Button to kick off all other sources from screen.
Or ask for somebody to remove its source from screen
Request the moderator to put you on screen or claim the moderation role from the ClickShare application
ClickShare tries to restore the connection automatically.
If this fails, the LEDs of the Button start blinking red. You should unplug the Button from your laptop and start a new
.
Pair the Buttons with the Base Unit
Pair the Buttons with the Base
Unit.
Button is not paired to correct
Base Unit.
Base Unit settings have changed and Button has not been paired again.
IP address of the Base Unit has changed.
The Button cannot connect to the
Base Unit due to firewall settings.
Pair the Buttons with the Base
Unit.
Contact your IT responsible.
Button is using a channel with high utilization.
Base Unit antennas are obstructed.
Low signal strength
Contact your IT responsible.
Make sure no insulation or metal plating or a cage is placed around the Base Unit. If too far, place the
Base Unit closer to the location of the Buttons. Preferably, have line of sight between Base Unit and
Button.
Place the Base Unit closer to the location of the Buttons. Check the settings of the Base Unit to see if the power of the wireless signal has not been set too low.
54 R5900098 /10 CX-30
Problem Cause
Laptop performance
Some programs of Windows are not shown on the display.
Use of overlays, 3D or hardware acceleration in the GPU.
Unable to share from extended desktop.
Mac OS
Extension pack not installed
Old Extension pack installed
Solution
If the video performance is acceptable with a higher performing laptop, laptop performance might be the cause of bad video playback. To reduce the load on the laptop, you can:
• Lower the resolution of the laptop screen
• Use application sharing in the
ClickShare app to only share a part of the screen.
• Disable hardware acceleration for video.
• Disable extended screen sharing
Disable overlays or hardware acceleration in the GPU.
In Windows 7, disable AeroGlass.
The Clickshare Extension pack only works with Windows. This feature is available to Mac users through Airplay. An alternative is to use the Window sharing functionality in the ClickShare
Desktop App
In order to have a second screen on your computer when using
ClickShare, you will need to download and install the
ClickShare extension pack.
barco.
com/clickshare/extensionpack
ClickShare will only work with the latest version of the Extension
Pack. Please uninstall the extension pack and install the latest version.
barco.com/ clickshare/extensionpack
Issues related to screen sharing (audio of shared content)
Problem
Your screen is shown, but your audio is not playing on the meeting room audio system.
There is no ClickShare audio device for me to select on my computer.
Cause
Your audio signal on your PC is muted.
Audio system of the meeting room is not switched on or not connected.
Audio output of the Base Unit is not correctly configured.
Audio device is not available in my
OS when I plug in the Button after changing audio settings on my
Base Unit.
Solution
Right click on the speaker icon and switch off the mute.
Switch on the audio system of the meeting room. Check audio connection between the Base Unit and the audio system of the meeting room.
Ask your administrator to configure audio of the Base Unit.
Re-pair the Buttons with the Base
Unit.
R5900098 /10 CX-30 55
Problem
ClickShare audio device is visible, but sound is coming out of my own device or other audio device connected to my computer.
Audio is heard in the room while not sharing on the big screen.
Audio and video are not in sync.
Cause
Audio output of the Button is not selected.
ClickShare speaker is not selected as default device.
ClickShare speakerphone is selected as default device.
ClickShare speakerphone is selected as audio device.
Solution
In Windows, left click on the speaker icon and select the
ClickShare Speaker.
In Windows, right click on the speaker icon and select “Playback devices”. In the Playback tab, right click on the ClickShare Speaker and select as “Default device”, on the ClickShare Speakerphone if available, right click and select as
“Default communications device”.
In Windows, right click on the speaker icon and select “Playback devices”. In the Playback tab, right click on the ClickShare Speaker and select as “Default device”, on the ClickShare Speakerphone if available, right click and select as
“Default communications device”.
In Windows, left click on the speaker icon and select the
ClickShare Speaker See also above for to select the ClickShare
Speaker as default audio device.
56 R5900098 /10 CX-30
Regulatory information
R5900098 /10 CX-30 57
5.1 Product compliance
EN55032-CISPR32 Class B ITE (Information Technology Equipment)
This is a class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
If this equipment does cause interference to radio or television reception, the user may try to correct the interference by one or more of the following measures :
• Re-orientation of the receiving antenna for the radio or television.
• Relocate the equipment with respect to the receiver.
• Plug the equipment into a different outlet so that the equipment and receiver are on different branch circuits.
• Fasten cables connectors to the equipment by mounting screws.
Federal Communication Commission Interference Statement
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
You may also find helpful the following booklet, prepared by the FCC: "How to Identify and Resolve Radio-TV
Interference Problems." This booklet is available from the U.S. Government Printing Office, Washington D.C.
20402.
Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commissions rules.
In order to maintain compliance with FCC regulations shielded cables must be used with this equipment.
Operation with non-approved equipment or unshielded cables is likely to result in interference to radio & television reception.
FCC RF Radiation Exposure Statement: This device is capable of operating in 802.11a mode. For 802.11a
devices operating in the frequency range of 5.15 - 5.25 GHz, they are restricted for indoor operations to reduce any potential harmful interference for Mobile Satellite Services (MSS) in the US. WIFI Access Points that are capable of allowing your device to operate in 802.11a mode (5 .15 - 5.25 GHz band) are optimized for indoor use only. If your WIFI network is capable of operating in this mode, please restrict your WIFI use indoors to not violate federal regulations to protect Mobile Satellite Services.
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
Base Unit FCC ID: 2AAED-R9861511
Button FCC ID (model R9861600D01C): 2AAED-R9861600D01
58 R5900098 /10 CX-30
ClickShare Button 2AAED-R9861600D01 has been tested and meets the FCC RF exposure guidelines. The maximum SAR value reported is 1.19 W/kg.
ClickShare Button 2AAED-R9861600D01 should be installed and operated with a minimum distance of 5 mm between the radiator and your body.
FCC responsible: Barco Inc., 3059 Premiere Parkway Suite 400, 30097 Duluth GA, United States, Tel: +1
678 475 8000
For coutry code selection usage (WLAN devices) :
Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.
Canada, Industry Canada (IC) Notices
This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Barco Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Barco Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.
Caution: Exposure to Radio Frequency Radiation.
1. To comply with the Canadian RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
2. To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons.
Base Unit IC: IC: 21559-R9861511
Button IC (model R9861600D01C): 21559-R9861600D01
IC Antenna statement
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This radio transmitter 23575-R9861511 has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Indoor use only warning
Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Certification information (SAR)
This device is also designed to meet the requirements for exposure to radio waves established by the Industry
Canada.
The SAR limit adopted by Canada is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the IC for this device type complies with this limit.
The highest SAR value reported to the IC for this device type when using in portable exposure conditions is
1.14 W/kg.
Canada, avis d'lndustry Canada (IC)
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
R5900098 /10 CX-30 59
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Informations concernant l'exposition aux fréquences radio (RF)
La puissance de sortie émise par l'appareil de sans fil Barco est inférieure à la limite d'exposition aux fréquences radio d'Industry Canada (IC). Utilisez l'appareil de sans fil Barco de façon à minimiser les contacts humains lors du fonctionnement normal.
Avertissement: L'exposition aux rayonnements fréquences radio
1. Pour se conformer aux exigences de conformité RF canadienne l'exposition, cet appareil et son antenne ne doivent pas être co-localisés ou fonctionnant en conjonction avec une autre antenne ou transmetteur.
2. Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de séparation d'au moins 20 cm doit être maintenue entre l'antenne de cet appareil et toutes les personnes.
IC Base Unit: 23575-R9861511
IC Button (modèle R9861600D01C): 21559-R9861600D01
Déclaration d'antenne d'Industrie Canada (IC)
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p. i. r. e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.
Le présent émetteur radio 23575-R9861511 a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
Utilisation à l'intérieur seulement
La bande 5 150-5 250 MHz est réservés uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
Informations de certification (DAS)
Cet appareil est également conçu pour satisfaire aux exigences concernant l’exposition aux ondes radioélectriques établies par Industrie Canada.
Le seuil du DAS adopté par le Canada est de 1.6 W/kg pour 1g de tissu. La plus grande valeur de DAS signalée à IC pour ce type d’appareil ne dépasse pas ce seuil.
La valeur maximale de DAS signalée à IC pour ce type d’appareil lors du test dans des conditions d’exposition portative est de 1.14 W/kg.
5.2 Open source software provisions
Open Source Software provisions
This product contains software components released under an Open Source license. A copy of the source code is available on request by contacting your Barco customer support representative.
EACH SEPARATE OPEN SOURCE SOFTWARE COMPONENT AND ANY RELATED DOCUMENTATION
ARE PROVIDED "AS IS" WITHOUT EXPRESS OR IMPLIED WARRANTY INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR ANY OTHER CONTRIBUTOR BE LIABLE FOR
DIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS OPEN SOURCE SOFTWARE. MORE INFORMATION/
DETAILS IS TO BE FOUND IN EACH SPECIFIC OPEN SOURCE LICENSE.
60 R5900098 /10 CX-30
Copyright on each Open Source Software component belongs to the respective initial copyright holder, each additional contributor and/or their respective assignee (s), as may be identified in the respective documentation, source code, README file, or otherwise. You shall not remove or obscure or otherwise alter the respective copyrights.
You acknowledge living up to the conditions of each separate Open Source Software license.
In the development of the Software, the following Open Source Software components have been used:
PACKAGE alsa-lib alsa-plugins libsamplerate libsndfile alsa-utils ncurses avahi dbus expat libselinux libsepol pcre python3 bluez5_utilsheaders libffi libzlib libcap libdaemon libevent libopenssl libglib2 elfutils bzip2 util-linux-libs bc bind libxml2 readline
VERSION
1.2.4
1.1.1
0.1.9
1.0.28
1.2.4
6.1
0.8
1.12.22
2.4.7
3.1
3.1
8.44
3.9.9
5.62
3.3
1.2.11
2.48
0.14
2.1.12
1.1.1n
2.66.8
0.181
1.0.8
2.37.4
1.07.1
9.11.36
2.9.13
8.1
SOURCE SITE https://www.alsa-project.org/files/pub/lib ftp://ftp.alsa-project.org/pub/plugins http://www.mega-nerd.com/SRC http://www.mega-nerd.com/libsndfile/files https://www.alsa-project.org/files/pub/utils http://ftpmirror.gnu.org/ncurses https://github.com/lathiat/avahi/releases/download/v0.8
https://dbus.freedesktop.org/releases/dbus http://downloads.sourceforge.net/project/expat/expat/2.4.7
https://github.com/SELinuxProject/selinux/releases/download/
20200710 https://github.com/SELinuxProject/selinux/releases/download/
20200710 http://downloads.sourceforge.net/project/pcre/pcre/8.44
https://python.org/ftp/python/3.9.9
https://cdn.kernel.org/pub/linux/bluetooth https://github.com/libffi/libffi/archive/v3.3
http://www.zlib.net
https://www.kernel.org/pub/linux/libs/security/linux-privs/libcap2 http://0pointer.de/lennart/projects/libdaemon https://github.com/libevent/libevent/releases/download/release-
2.1.12-stable https://www.openssl.org/source http://ftp.gnome.org/pub/gnome/sources/glib/2.66
https://sourceware.org/elfutils/ftp/0.181
https://sourceware.org/pub/bzip2 https://cdn.kernel.org/pub/linux/utils/util-linux/v2.37
http://ftp.gnu.org/gnu/bc https://ftp.isc.org/isc/bind9/9.11.36
http://ftp.gnome.org/pub/gnome/sources/libxml2/2.9
http://ftpmirror.gnu.org/readline
R5900098 /10 CX-30 61
VERSION
1.5
5.62
1.0.1
3.2.9
28
1.7.1
1.33.2
4.1
1.45.6
2.37.4
5.38
1.5.1
2.6.4
10.37
5.7.0
1.8.6
0.7.1
4.2.8p15
20191231-3.1
0.10.0
3.7.0
1.18.10
6.0
013
1.0.24
1.17.2
20210119
1.16.0
2.13.1
2.10.4
1.6.37
PACKAGE bitstream bluez5_utils libical eudev kmod bridge-utils busybox dosfstools e2fsprogs util-linux file linux-pam flex pcre2 iproute2 iptables netcat ntp libedit libbsd pciutils start-stopdaemon unzip usbutils libusb c-ares ca-certificates cairo fontconfig freetype libpng
62 R5900098 /10 CX-30
SOURCE SITE https://get.videolan.org/bitstream/1.5
https://cdn.kernel.org/pub/linux/bluetooth https://github.com/libical/libical/releases/download/v1.0.1
http://dev.gentoo.org/~blueness/eudev https://cdn.kernel.org/pub/linux/utils/kernel/kmod https://cdn.kernel.org/pub/linux/utils/net/bridge-utils https://www.busybox.net/downloads https://github.com/dosfstools/dosfstools/releases/download/ v4.1
https://cdn.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/ v1.45.6
https://cdn.kernel.org/pub/linux/utils/util-linux/v2.37
ftp://ftp.astron.com/pub/file https://github.com/linux-pam/linux-pam/releases/download/ v1.5.1
https://github.com/westes/flex/files/981163 https://github.com/PhilipHazel/pcre2/releases/download/pcre2-
10.37
https://cdn.kernel.org/pub/linux/utils/net/iproute2 https://netfilter.org/projects/iptables/files http://downloads.sourceforge.net/project/netcat/netcat/0.7.1
https://www.eecis.udel.edu/~ntp/ntp_spool/ntp4/ntp-4.2
http://www.thrysoee.dk/editline https://libbsd.freedesktop.org/releases https://cdn.kernel.org/pub/software/utils/pciutils http://snapshot.debian.org/archive/debian/20160731T221931Z/ pool/main/d/dpkg https://snapshot.debian.org/archive/debian/
20210110T204103Z/pool/main/u/unzip https://cdn.kernel.org/pub/linux/utils/usb/usbutils https://github.com/libusb/libusb/releases/download/v1.0.24
http://c-ares.haxx.se/download https://snapshot.debian.org/archive/debian/
20210325T091936Z/pool/main/c/ca-certificates http://cairographics.org/releases http://fontconfig.org/release http://download.savannah.gnu.org/releases/freetype http://downloads.sourceforge.net/project/libpng/libpng16/1.6.37
crda libnl cryptsetup json-c libargon2 lvm2 libaio popt dhcp dnsmasq dropbear dvblast libev faad2 fbv giflib jpeg-turbo ffmpeg libv4l qt5base icu libinput libevdev mtdev
PACKAGE libdrm libpthread-stubs valgrind pixman wayland
VERSION
2.4.104
0.4
3.16.1
0.40.0
1.18.0
collectd libgcrypt libgpg-error lm-sensors
5.12.0
1.9.4
1.41
3.6.0
1.18
4.4.2-P1
2.85
2020.81
3.4
4.27
2.10.0
1.0b
5.2.1
2.0.6
4.3.3
1.20.0
5.15.2
4.14
3.5.0
2.3.6
0.15
20190702
2.02.185
0.3.112
69-1
1.16.4
1.11.0
1.1.6
SOURCE SITE https://dri.freedesktop.org/libdrm http://xcb.freedesktop.org/dist https://sourceware.org/pub/valgrind https://xorg.freedesktop.org/releases/individual/lib https://wayland.freedesktop.org/releases https://github.com/collectd/collectd/releases/download/collectd-
5.12.0
https://gnupg.org/ftp/gcrypt/libgcrypt https://www.gnupg.org/ftp/gcrypt/libgpg-error https://github.com/lm-sensors/lm-sensors/archive/V3-6-0 https://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/crda.git/ snapshot https://github.com/thom311/libnl/releases/download/libnl3_5_0 https://cdn.kernel.org/pub/linux/utils/cryptsetup/v2.3
https://s3.amazonaws.com/json-c_releases/releases https://github.com/P-H-C/phc-winner-argon2/archive/20190702 http://sources.redhat.com/pub/lvm2 https://releases.pagure.org/libaio http://ftp.rpm.org/popt/releases/popt-1.x
http://ftp.isc.org/isc/dhcp/4.4.2-P1 http://thekelleys.org.uk/dnsmasq https://matt.ucc.asn.au/dropbear/releases https://get.videolan.org/dvblast/3.4
http://dist.schmorp.de/libev/Attic https://github.com/knik0/faad2/archive/2_10_0 http://s-tech.elsat.net.pl/fbv http://downloads.sourceforge.net/project/giflib https://downloads.sourceforge.net/project/libjpeg-turbo/2.0.6
http://ffmpeg.org/releases https://linuxtv.org/downloads/v4l-utils https://download.qt.io/archive/qt/5.15/5.15.2/submodules https://github.com/unicode-org/icu/releases/download/release-
69-1 http://www.freedesktop.org/software/libinput http://www.freedesktop.org/software/libevdev http://bitmath.org/code/mtdev
R5900098 /10 CX-30 63
64
PACKAGE libva libvorbis libogg libvpx opus speex speexdsp fmt gdb gnupg2 libassuan libksba libnpth sqlite gssdp libsoup gst1-libav gst1-pluginsbase gstreamer1 gst1-plugins-bad waylandprotocols gst1-pluginsgood libgudev gst1-vaapi
7.1.3
10.2
2.2.32
2.5.4
1.5.0
1.6
3.34.1
1.0.2
2.62.3
1.18.6
VERSION
2.10.0
1.3.7
1.3.4
1.9.0
1.3.1
1.2.0
SpeexDSP-1.2.0
1.18.6
1.18.6
1.18.6
1.20
1.18.6
233
1.18.6
ce6d60e7def146c13d0b8bca4642e7401a0a8995
0.342
htop hwdata input-eventdaemon iperf iperf3 iw jansson
0.1.3
2.0.13
3.9
5.9
2.13.1
R5900098 /10 CX-30
SOURCE SITE https://github.com/intel/libva/releases/download/2.10.0
https://downloads.xiph.org/releases/vorbis http://downloads.xiph.org/releases/ogg https://github.com/webmproject/libvpx/archive/v1.9.0
https://downloads.xiph.org/releases/opus https://downloads.xiph.org/releases/speex https://gitlab.xiph.org/xiph/speexdsp.git
https://github.com/fmtlib/fmt/releases/download/7.1.3
http://ftpmirror.gnu.org/gdb https://gnupg.org/ftp/gcrypt/gnupg ftp://ftp.gnupg.org/gcrypt/libassuan ftp://ftp.gnupg.org/gcrypt/libksba https://www.gnupg.org/ftp/gcrypt/npth https://www.sqlite.org/2021 http://ftp.gnome.org/pub/gnome/sources/gssdp/1.0
http://ftp.gnome.org/pub/gnome/sources/libsoup/2.62
https://gstreamer.freedesktop.org/src/gst-libav https://gstreamer.freedesktop.org/src/gst-plugins-base https://gstreamer.freedesktop.org/src/gstreamer https://gstreamer.freedesktop.org/src/gst-plugins-bad https://wayland.freedesktop.org/releases https://gstreamer.freedesktop.org/src/gst-plugins-good http://ftp.gnome.org/pub/GNOME/sources/libgudev/233 https://gstreamer.freedesktop.org/src/gstreamer-vaapi https://github.com/htop-dev/htop/archive/ ce6d60e7def146c13d0b8bca4642e7401a0a8995 https://github.com/vcrhonek/hwdata/archive/v0.342
https://github.com/gandro/input-event-daemon/archive/v0.1.3
http://downloads.sourceforge.net/project/iperf2 https://downloads.es.net/pub/iperf https://cdn.kernel.org/pub/software/network/iw http://www.digip.org/jansson/releases
libnss libopusenc libpcap libqrencode libsha1 libtool libuv libxkbcommon libyaml libzip lighttpd logrotate memtester monit
PACKAGE jose jq json-for-moderncpp jsoncpp libarchive
VERSION
10 a17dd3248a666d01be75f6b16be37e80e20b0954
3.9.0
1.9.4
3.5.3
libconfig libcurl nghttp2 libestr libfastjson liblogging libnspr netsnmp nodejs opkg opus-tools opusfile
1.7.3
7.79.1
1.41.0
0.1.11
0.99.9
1.0.6
4.32
3.68.1
0.2.1
1.10.1
4.1.1
0.3
2.4.6
1.40.0
1.0.3
0.2.5
1.7.3
1.4.58
3.18.0
4.5.0
5.26.0
5.9
12.22.9
0.4.2
0.2
0.12
SOURCE SITE https://github.com/latchset/jose/releases/download/v10 https://github.com/stedolan/jq/archive/ a17dd3248a666d01be75f6b16be37e80e20b0954 https://github.com/nlohmann/json/archive/v3.9.0
https://github.com/open-source-parsers/jsoncpp/archive/1.9.4
https://www.libarchive.de/downloads https://github.com/hyperrealm/libconfig/releases/download/ v1.7.3
https://curl.se/download https://github.com/nghttp2/nghttp2/releases/download/v1.41.0
http://libestr.adiscon.com/files/download https://github.com/rsyslog/libfastjson/archive/v0.99.9
http://download.rsyslog.com/liblogging https://ftp.mozilla.org/pub/mozilla.org/nspr/releases/v4.32/src https://ftp.mozilla.org/pub/mozilla.org/security/nss/releases/
NSS_3_68_1_RTM/src https://downloads.xiph.org/releases/opus https://www.tcpdump.org/release http://fukuchi.org/works/qrencode https://github.com/dottedmag/libsha1/archive/0.3
http://ftpmirror.gnu.org/libtool https://github.com/libuv/libuv/archive/v1.40.0
http://xkbcommon.org/download http://pyyaml.org/download/libyaml https://libzip.org/download http://download.lighttpd.net/lighttpd/releases-1.4.x
https://github.com/logrotate/logrotate/releases/download/3.18.0
http://pyropus.ca/software/memtester/old-versions http://mmonit.com/monit/dist https://downloads.sourceforge.net/project/net-snmp/net-snmp/
5.9
http://nodejs.org/dist/v12.22.9
http://downloads.yoctoproject.org/releases/opkg https://downloads.xiph.org/releases/opus https://downloads.xiph.org/releases/opus
R5900098 /10 CX-30 65
PACKAGE php portaudio powertop protobuf python-pyyaml tpm-tools trousers tzdata weston
VERSION
7.4.28
v190600_20161030
2.13
3.14.0
5.4.1
python-serial qt5tools
3.5
qt5declarative qt5graphicaleffects qt5imageformats
5.15.2
5.15.2
qt5multimedia
5.15.2
qt5quickcontrols 5.15.2
qt5quickcontrols2 qt5serialport
5.15.2
5.15.2
5.15.2
qt5svg
5.15.2
5.15.2
qt5webchannel
5.15.2
qt5websockets 5.15.2
qt5webengine
5.15.2
webp
1.2.0
ramspeed
2.6.0
rsync
3.1.3
rsyslog sox
8.2010.0
7524160b29a476f7e87bc14fddf12d349f9a3c5e strace tcpdump
5.10
4.99.1
1.3.9.1
0.3.15
2021a
9.0.0
SOURCE SITE http://www.php.net/distributions http://www.portaudio.com/archives https://01.org/sites/default/files/downloads https://github.com/protocolbuffers/protobuf/releases/download/ v3.14.0
https://files.pythonhosted.org/packages/a0/a4/ d63f2d7597e1a4b55aa3b4d6c5b029991d3b824b5bd331af8d4ab1ed687d https://files.pythonhosted.org/packages/1e/7d/ ae3f0a63f41e4d2f6cb66a5b57197850f919f59e558159a4dd3a818f5082 https://download.qt.io/archive/qt/5.15/5.15.2/submodules https://download.qt.io/archive/qt/5.15/5.15.2/submodules https://download.qt.io/archive/qt/5.15/5.15.2/submodules https://download.qt.io/archive/qt/5.15/5.15.2/submodules https://download.qt.io/archive/qt/5.15/5.15.2/submodules https://download.qt.io/archive/qt/5.15/5.15.2/submodules https://download.qt.io/archive/qt/5.15/5.15.2/submodules https://download.qt.io/archive/qt/5.15/5.15.2/submodules https://download.qt.io/archive/qt/5.15/5.15.2/submodules https://download.qt.io/archive/qt/5.15/5.15.2/submodules https://download.qt.io/archive/qt/5.15/5.15.2/submodules https://download.qt.io/archive/qt/5.15/5.15.2/submodules http://downloads.webmproject.org/releases/webp http://www.alasir.com/software/ramspeed http://rsync.samba.org/ftp/rsync/src http://rsyslog.com/files/download/rsyslog git://git.code.sf.net/p/sox/code https://strace.io/files/5.10
https://www.tcpdump.org/release http://downloads.sourceforge.net/project/trousers/tpm-tools/
1.3.9.1
http://downloads.sourceforge.net/project/trousers/trousers/
0.3.15
https://www.iana.org/time-zones/repository/releases https://wayland.freedesktop.org/releases
66 R5900098 /10 CX-30
PACKAGE wireless-regdb wireless_tools wpa_supplicant xkeyboard-config zip
VERSION
2022.02.18
30.pre9
2.9
2.31
3.0
5_4-2016q3-
20160926 ta-arm-eabi arphic-umingfonts dejavu-fonts sazanami-fonts splashutils unfonts mmc-utils json
20080216
2.34
20040629
1.5.4.4
1.0
d40ec535b9d4e4c974e8c2fbfb422cd0348cc5e8
1.8.4-cs2 flexnet qca6174a-30 wpa_supplicant wpa_passphrase wpa_cli hostapd hostapd_cli qca2066-10 rscode xz
1.0.5
4.5.25.38
2bbc5a2b092c4a1330b19070672c5f9d6ade8fbd
2bbc5a2b092c4a1330b19070672c5f9d6ade8fbd
2bbc5a2b092c4a1330b19070672c5f9d6ade8fbd
2bbc5a2b092c4a1330b19070672c5f9d6ade8fbd
2bbc5a2b092c4a1330b19070672c5f9d6ade8fbd
515f4ebab06d1f0171b8c60b9250100e9420e627
1.3
5.1.1
libsrp libfdk-aac
2.1.2
0.1.4
SOURCE SITE https://cdn.kernel.org/pub/software/network/wireless-regdb https://hewlettpackard.github.io/wireless-tools http://w1.fi/releases https://www.x.org/releases/individual/data/xkeyboard-config ftp://ftp.info-zip.org/pub/infozip/src https://launchpad.net/gcc-arm-embedded/5.0/5-2016-q3update/+download http://archive.ubuntu.com/ubuntu/pool/main/t/ttf-arphic-uming http://downloads.sourceforge.net/project/dejavu/dejavu/2.34
http://sourceforge.jp/projects/efont/downloads/10087 http://dev.gentoo.org/~spock/projects/gensplash/archive http://kldp.net/frs/download.php/1425 git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git
http://json.org/ https://www.flexerasoftware.com/monetize/products/flexnetlicensing.html
https://source.codeaurora.org/external/wlan/qcacld-2.0
http://w1.fi/hostap.git
http://w1.fi/hostap.git
http://w1.fi/hostap.git
http://w1.fi/hostap.git
http://w1.fi/hostap.git
https://source.codeaurora.org/external/wlan/qcacld-3.0/ https://sourceforge.net/projects/rscode/files/rscode https://tukaani.org/xz https://github.com/secure-remote-password/stanford-srp/tree/ master/libsrp https://github.com/mstorsjo/fdk-aac
R5900098 /10 CX-30 67
PACKAGE libalac azure-iot-c-sdk bcrypt body-parser bunyanprettystream bunyan-syslog bunyan cors dbus-next express generatepassword isomorphic-fetch js-yaml microsoft-graphclient moment morgan multer npm passport-http passport promise request swagger-parser swagger-uiexpress uboot linux avb-vbmeta
VERSION
4
2021-06-01
3.0.8
1.19.0
0.1.3
0.3.3
1.8.15
2.8.5
0.9.2
4.17.1
1.6.0
2.2.1
3.14.1
2.0.0
2.29.1
1.10.0
1.4.2
6.14.11
0.3.0
0.4.1
8.1.0
2.88.2
6.0.5
SOURCE SITE https://github.com/macosforge/alac https://github.com/Azure/azure-iot-sdk-c https://github.com/kelektiv/node.bcrypt.js
https://github.com/expressjs/body-parser https://github.com/trentm/node-bunyan https://github.com/trentm/node-bunyan https://github.com/trentm/node-bunyan https://github.com/expressjs/cors https://github.com/dbusjs/node-dbus-next https://github.com/expressjs/express https://github.com/brendanashworth/generate-password https://github.com/matthew-andrews/isomorphic-fetch https://github.com/nodeca/js-yaml https://github.com/microsoftgraph/msgraph-sdk-javascript http://momentjs.com/ https://github.com/expressjs/morgan https://github.com/expressjs/multer https://docs.npmjs.com
http://github.com/jaredhanson/passport-http http://github.com/jaredhanson/passport https://github.com/then/promise https://github.com/request/request https://github.com/APIDevTools/swagger-parser
4.1.6
f44ca27357563e9ed43f1ff76d3bd8dd14f4747e be6b516f86109be1704aa3e3944443f8465b04b4
21e95266704e572ced1c633bbc4aea9f42afa0a5 https://github.com/scottie1984/swagger-ui-express https://github.com/rockchip-linux/u-boot https://github.com/rockchip-linux/kernel https://android.googlesource.com/platform/external/avb/
+/21e95266704e572ced1c633bbc4aea9f42afa0a5/avbtool
68 R5900098 /10 CX-30
PACKAGE bootcontrol libavb libavb-ab libavb-user rockchip-linuxbin rockchip-tee-user rockchip-binary rockchipgstreamer1 rockchip-mpp rockchip-libmali rockchip-linuxrga
NXP-SDK ring-buff quiet-libcorrect quiet-dsp quiet
VERSION b18c9afdb7d02e1249cee5cb430dc9f15a3ccc27
7617e69a524acc1a50a8a98b257d1374ea6fe4a4
7617e69a524acc1a50a8a98b257d1374ea6fe4a4
7617e69a524acc1a50a8a98b257d1374ea6fe4a4 d6676eb02c8a1b4966df7d8c4bb203ea25fc98b2
1e3bdb582c52707d71e5cbe29ca1064d7c04b696
04e55089bb4bbade7c50d9b54b5a1cfa70771cd6
59c3bdd06a22844957fe20f47c998bb8255bedd2 e2ad911c00a6e5023e7238ce750d11c1983b81cf f226e982386287a4df669e2832d9ddd613d4153b
72e7764a9fe358e6ad50eb1b21176cc95802c7fb
SOURCE SITE https://github.com/rockchip-linux/avb/tree/master/boot_control https://github.com/rockchip-linux/avb/tree/master/libavb https://github.com/rockchip-linux/avb/tree/master/libavb_ab https://github.com/rockchip-linux/avb/tree/master/libavb_user https://github.com/rockchip-linux/bin https://github.com/rockchip-linux/rk_tee_user https://github.com/rockchip-linux/rkbin https://github.com/rockchip-linux/gstreamer-rockchip https://github.com/rockchip-linux/mpp https://github.com/rockchip-linux/libmali https://github.com/rockchip-linux/linux-rga
2.5.0
https://www.nxp.com/support/developer-resources/softwaredevelopment-tools/mcuxpresso-software-and-tools/ mcuxpresso-software-development-kit-sdk:MCUXpresso-SDK?
tab=Design_Tools_Tab https://code.google.com/archive/p/ring-buff
f5a28c74fba7a99736fe49d3a5243eca29517ae9
4951bbbf67a9857dbaab0bc6fa69801717308109 b64a058ed40a49a8ff777bfb526f2989480eb1ec https://github.com/quiet/libcorrect https://github.com/quiet/quiet-dsp https://github.com/quiet/quiet
R5900098 /10 CX-30 69
5.3 Disposal information
Disposal Information
Waste Electrical and Electronic Equipment (WEEE)
This symbol on the product indicates that, under the European Directive 2012/19/EU governing waste from electrical and electronic equipment, this product must not be disposed of with other municipal waste. Please dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
For more information about recycling of this product, please contact your local city office or your municipal waste disposal service. For details, please visit the Barco website at: http://www.barco.
com/AboutBarco/weee
Disposal of batteries in the product
This product contains batteries covered by the Directive 2006/66/EC which must be collected and disposed of separately from municipal waste.
If the battery contains more than the specified values of lead (Pb), mercury (Hg) or cadmium (Cd), these chemical symbols will appear below the crossed-out wheeled bin symbol.
By participating in separate collection of batteries, you will help to ensure proper disposal and to prevent potential negative effects on the environment and human health.
5.4 Rohs compliance
Turkey RoHS compliance
Türkiye Cumhuriyeti: AEEE Yönetmeliğine Uygundur.
[Republic of Turkey: In conformity with the WEEE Regulation]
中国大陆 RoHS – Chinese Mainland RoHS
根据中国大陆《电器电子产品有害物质限制使用管理办法》（也称为中国大陆 RoHS ）， 以下部分列出了
Barco 产品中可能包含的有毒和 / 或有害物质的名称和含量。中国大陆 RoHS 指令包含在中国信息产业部 MCV 标
准： “ 电子信息产品中有毒物质的限量要求 ” 中。
According to the “Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products” (Also called RoHS of Chinese Mainland), the table below lists the names and contents of toxic and/or hazardous substances that Barco’s product may contain. The RoHS of Chinese
Mainland is included in the MCV standard of the Ministry of Information Industry of China, in the section “Limit
Requirements of toxic substances in Electronic Information Products”.
零件项目 ( 名称 )
Component Name
有毒有害物质或元素
Hazardous Substances or Elements
铅 汞 镉
(Pb) (Hg) (Cd)
六 价铬
(Cr6+)
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印制电路配件
Printed Circuit
Assemblies
电 ( 线 ) 缆
Cables
底架
Chassis x x x
0
0
0 x x x
0
0
0
0
0
0
0
0
0
70 R5900098 /10 CX-30
电源供应器
Power Supply Unit
文件说明书 x
0
0
0 x
0
0
0
0
0
Paper Manuals
本表格依据 SJ/T 11364 的规定编制
This table is prepared in accordance with the provisions of SJ/T 11364.
O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 GB/T 26572 标准规定的限量要求以下 .
0
0
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB/T 26572.
X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 标准规定的限量要求 .
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572.
在中国大陆销售的相应电子信息产品（ EIP ）都必须遵照中国大陆《电子电气产品有害物质限制使用标识要
求》标准贴上环保使用期限（ EFUP ）标签。 Barco 产品所采用的 EFUP 标签（请参阅实例，徽标内部的编号使
用于指定产品）基于中国大陆的《电子信息产品环保使用期限通则》标准。
All Electronic Information Products (EIP) that are sold within Chinese Mainland must comply with the “Marking for the restriction of the use of hazardous substances in electrical and electronic product” of Chinese
Mainland, marked with the Environmental Friendly Use Period (EFUP) logo. The number inside the EFUP logo that Barco uses (please refer to the photo) is based on the “General guidelines of environment-friendly use period of electronic information products” of Chinese Mainland.
Image 5–1
限用物質含有情況標示聲明書 (Declaration of the Presence Condition of the Restricted
Substances Marking) — Taiwan RoHS compliance
設備名稱： 影音共享控制中心， 型號（型式）： CSE-800
Equipment name: wireless presentation system, Type designation: CSE-800
限用物質及其化學符號
Restricted substances and its chemical symbols
單元
Unit
鉛
Lead
(Pb)
汞
Mercury
(Hg)
鎘
Cadmium
(Cd)
六價鉻
Hexavalent chromium
(Cr6+)
多溴聯苯
Polybrominated biphenyld
(PBB)
多溴二苯醚
Polybrominated diphenyl ethers
(PBDE)
電路板
Printed Circuit Assemblies
電（線）纜
Cables
機箱
Chassis
—
—
—
O
O
O
—
—
—
O
O
O
O
O
O
O
O
O
R5900098 /10 CX-30 71
電源供應器
Power Supply Unit
— O O O O
備考 1.
〝超出 0.1 wt % 〞及〝超出 0.01 wt % 〞係指限用物質之百分比含量超出百分比含量基準值。
Note 1 ： “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
備考 2.
〝〇〞係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2 ： “ 〇 ” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
備考 3.
〝 — 〞係指該項限用物質為排除項目。
Note 3 ： The “—” indicates that the restricted substance corresponds to the exemption.
O
5.5 Production address
Factory
MSI Computer (Shenzhen) Co., Ltd.
Suite of MSI computer (ShenZhen) Co., Ltd. No. 37, TangTou Ave., TangTou Community, Shiyan Sub-
District, Baoan District, Shenzhen City, Guang Dong Province, China.
Made in information
The made in country is indicated on the product ID label on the product itself.
Production date
The month and year of production is indicated on the product ID label on the product itself.
5.6 Importers contact information
Contact
To find your local importer, contact Barco directly or one of Barco's regional offices via the contact information given on Barco's web site, www.barco.com
.
72 R5900098 /10 CX-30
Wi Fi
R5900098 /10 | 2022-06-01 www.barco.com
İndir
Herkese açık bağlantı güncellendi
Sohbetinize giden herkese açık bağlantı güncellendi. You may view and manage your chat links after registration here.
Belge herkese açık bağlantısı
Reklam
