Start the blackboarding or annotation mode. Barco ClickShare CX-30

3.16.1 Start the blackboarding or annotation mode

How to start

1.

Click on the blackboarding icon in the permanent bar (1).

Getting started

2 1 3

Image 3–42

The selection menu with Blackboard and Annotation opens on the current presented content. When nothing is shared, only Blackboard will be available in the menu.

2.

To start annotation, click on the annotation icon in the permanent bar (2)

No clients should be disconnected. The current shared screen(s) will be captured and used as background. No previous content can be shown again.

3.16.2 Drawing tools

Pen

Click on the Pen icon (3) to start the drawing functionality. Draw with you finger on the screen.

2 1 3

Image 3–43

Erase

Click on the Erase icon (2) to start the erase functionality. Erasing can be done with single finger or with multiple fingers. The eraser grows in size depending on the speed of the movement. The erased parts are indicated with a circular overlay.

R5900098 /10 CX-30 45