Odyssey Line Voltage
Flexible Track System
1-847-559-5500
Catalog No.
Type
Project
Odyssey Flexible Track
Constructed from anodized aluminum with insulated conductors and copper ground wire throughout. All components are rated for 120V at 20A (max). Derate to 80% maximum load to meet NEC code. Track is field curvable to a minimum of a 12.5" radius, ideal for uniquely shaped lighting layouts. Each track section includes two (2) insulated end caps that are secured with set screws. System components are available in antique bronze and silver, cCSAus
Certified for dry locations. Finish: -AB, -S
LIR4242 - 2' Track with End Caps
LIR4244 - 4' Track with End Caps
LIR4246 - 6' Track with End Caps
LIR4248 - 8' Track with End Caps
LIR42412 - 12' Track with End Caps
Adjustable Ceiling Connector
Not for use on sloped ceilings. Includes allen wrench for locking length of stand.
Finish: -AB, -S
LIR589 - Range: 7-1/2" - 11-1/2"
Adjustable Sloped Ceiling
Connector
For use on unsloped or sloped ceilings up to 60°. Finish: -AB, -S
LIR779 - Range: 8-5/16" - 11-1/2"
LIR7792 - Range:14-1/2" - 24"
LIR7794 - Range: 26-1/2" - 48"
LIR7798 - Range: 50-1/2" - 96"
Odyssey Curving Machine
Mounts to table or board with built in clamp. Nylon Rollers to protect track finish.
LIR590-S
Adjustable Wall Connector
Includes allen wrench, concrete anchor,
8-32 brass nut (for T-bar grid mounting hardware), and wood screw. LIR7782 has an adjustable cable support to hold longer mounting positions. Finish: -AB, -S
LIR778 - Range: 5-3/4" - 9"
LIR7782 - Range: 14" - 24"
Ceiling Connectors
Ceiling flange is 15/16" in diameter.
Mounts in solid or grid ceilings. Includes concrete anchor, 8-32 brass nut (for T-bar grid mounting hardware), and wood screw.
Use 8-32 wall anchors, not supplied, for wallboard mounting. Finish: -AB, -S
LIR4255 - 3-5/16" L
LIR4251 - 4" L
LIR4252 - 7-7/8" L
Cable Ceiling Connector
Cable is adjustable. Finish: -AB, -S
LIR879 - 8'
LIR879-6M - 19' 8" www.contechlighting.com
Track Interconnect
Nickel plated allen screws, allen wrench included. Finish: -AB, -S
Rating: 120V, 20A
Body: 2-7/16" L
LIR426 - Conductive Interconnect
LIR601 - Non-Conductive Interconnect
Flexible Interconnect
Nickel plated allen screws, allen wrench included. Can bend through angles of
135°. Finish: -AB, -S
Rating: 120V, 20A
Body: 9-1/4" L
LIR742
Finish Codes: AB - Antique Bronze, S - Silver
Please Recycle
Continued on Page 2
All specifications subject to change without notice.
1-847-559-5500
Wall End Feed
Includes junction box cover.
Finish: -S
Rating: 120V, 20A. Height: 2-1/2";
Diameter: 4-3/8"
LIR1041
4" Fixed Power Stem with Canopy
4" from ceiling to center of track.
Finish: -AB, -S
Rating: 120V, 20A. Height: 1-5/16";
Diameter: 4-3/8"
LIR777
Adjustable Power Stem with Canopy
Floating Feed Rating: 120V, 20A. Includes allen wrench. Finish: -AB, -S
Canopy Dimensions: Height: 1-5/16";
Diameter: 4-3/8"
LIR745 - Range: 7-1/2" - 11-1/2"
LIR7452 - Range: 14" - 24"
LIR7454 - Range: 26" - 48"
LIR7458 - Range: 50" - 96"
Round Canopy with 19" Power
Supply Cord
Side cord, low profile canopy. 12AWG wire.
Finish: -AB, -S. Rating: 120V, 20A
Height: 1"; Diameter: 4-5/8"
LIR4278
Catalog No.
Type
Project
Arotech Metal Halide
Fixture Adapter
Allows use of ConTech Arotech Metal
Halide Track Fixtures. Offers on/off switch and provides push-in wire connectors between adapter and fixture. Finish: -S
LIR20MHE - 20W Metal Halide Ballast
LIR39MHE - 39W Metal Halide Ballast
LIR70MHE - 70W Metal Halide Ballast
Universal Fixture Adapter
Allows use of ConTech “CTL” series track fixtures. 3" drop from center of track. Not required for standard Odyssey fixtures.
10lb. load capacity. Finish: -AB, -S
LIR59875
Universal Pendant Adapter
Allows use of any line voltage pendant on
Odyssey Flexible Track. Finish: -AB, -S
LIR755
Round Canopy with Power Supply Cord
Center down cord, standard canopy.
12AWG wire. Adjustable length cord.
Finish: -AB, -S. Rating: 120V, 20A
Height: 1-5/16"; Diameter: 4-3/8"
Flexible Track Adapter
Connects Quick Release series fixtures and pendants to Odyssey Flexible Track.
Finish: -AB, -S
CRS-ODYQR
LIR42788 - 8' Cord
LIR4278-6M - 19' 8" Cord Circuit Breaker
Limits the amount of electrical load that can be placed on the circuit. Finish: -P, -B, -U
Current Limiting Device
Center down cord and square canopy. For
120V power feed only, not support. Must be used with Circuit Breaker (sold separately). Finish: -S.
LIRCLD
LIRCLD6
- 8' Cord
- 19' 8" Cord
REG1 - 120W, 1A
REG3 - 300W, 2.5A
REG6 - 600W, 5A
REG9 - 900W, 7.5A
REG10 - 1200W, 10A
REG12 - 1440W, 12A
REG14 - 1680W, 14A
Finish Codes: AB - Antique Bronze, B - Black, P - White, S - Silver, U - UnLook www.contechlighting.com
Please Recycle All specifications subject to change without notice.
