Kodak No 2 Stereo User Guide
PDF
سند
تبلیغات
تبلیغات
Picture
T ,aking
t&.'ith
the
Stereo
K 0 d a'k
No.2 fiJ
'P ric e T e n C e n t s
Publishedb}'
Eastman Kodak. Co.
Roche.s ter, New YorI\.
.. )
.
EA S TMAN .KODAK COMPANY
RO C HE ST ER, N . Y.
MANUFACTU R ER S O F
Kodaks ,
Bro\vnie Cameras,
Eastman's Plate Cameras,
Cartridge Roll Holder s,
Eastman's Solio Paper,
Eastman's Sepia Paper,
Eastman's Dekko Paper ,
Eastman's F erro·Prussiat e P aper ,
Eastman's Platinum Paper,
Eastman's W . D. P latinum Paper,
Eastman's R oyal Brom ide P aper,
Eastman's Standa r d Bromide Paper,
Eastman's Platino Bromid e Paper ,
Eastman's Enam eled Bromide P a per,
Eastman's Matte·Enamel Bromide Paper,
Eastman 's T ransparent F ilm ,
Eastman's Dry Plates,
Eastman's T ransparency P lates ,
Eastman's Flash Sheet s , Flash Powder ,
Tripods and other Specialties.
Apr il,
I Q0 2.
INSTRUCTIONS FOR USING THE
No.2 STEREO KODAK
Manufactured by
EASTMAN KODAK COMPANY
ROCHESTER, NEW YORK
BE.FORE LOADING.
B,"!fore taking any pictures with the Kodak, read the fo llowing instru ctions carefully and make yourself perfectly familiar
with the instrument, taking especial care to learn the construction
of the shutters.
'Work them for both time and insta nta neous
exposures several times before threading up the film.
The first a nd most important thing for the amateur to bear
in mind is that th e light which serves to impress the photographic
image upon th e sensitive film in a small fraction of a second
when it comes through the lens, can destroy the film as quick ly
as it makes th e picture.
Until it has been developed and fixed,
therefore, the film must never be exposed to white light for even
a fraction of a second, (this includes gaslight, lamplight, etc., )
or it will be ruined.
Throughout all the operations of loading
and unloading be extremely careful to keep the black paper
wound tightly around the film to prevent the admission of light.
EASTMAN KODAK COMPANY.
CONTE.NTS.
PART
1.
Loading the Kodak.
P ART
II.
Making the Exposure.
Section I. Instantaneous Exposures.
Section 2. Time Exposures Indoors.
Section 3 . Time Ex posures Outdoors.
Section 4. Flash L ight Pictures ,
PART
III.
R emoving the F ilm.
P ART
IV.
Developing.
PART
V.
Printing.
PAR.T I.
LOADING THE KODAK.
The film for the Stereo Kodak is furnished in
light-proof ro lls and the instrument can the refore
be loaded in daylight. The operation should,
however, be performed in a subdued light, not in
the glare of bright su nlight.
The Film.
TO LOAD.
I. T ake a position at a
table as far as possi ble from
any window a nd pressi ng on
the bottom of Kodak pull out
th e nickeled catch as indicated in Fig. I. and take the
roll holder from the box.
See Fig. II.
} ' I G . 1.
II. Push out on
the spring which is
at th e bottom of
the recess a t front
left hand corner of
the roll holder.
III. Put the full
spool into the recess and slip the
pi ns into place in
the hole in axis of
spool, ( F ig. III. )
l!'IG-. II.
6
EAS TMA N KODAK COMPANY.
allowing th e spring to
come back into place.
Be sure and get the
" Top" at the top. Each
spool is marked on the
end.
EIG . I V.
IV.
Cut the
gum slip that holds
th e end of th e
paper and holding
th e thumb of the
left hand firmly
against the roll,
thread th e black
paper under the
first cross piece and
pull across th e guide rollers,
as shown in Fig. IV.
V. Thread into the slot
in reel, being careful that
th e paper draws stra ight a nd
true, a nd turn the key until
the paper is taut. See Fig.
V.
Fold the pasteboard flap
up over the black paper a nd
insert the camera body in
the case once more.
Th roughout the .for e going operations, .from the
time the gum slip is cut on
FIG:. V.
NO. 2 STEREO KODAK MANUAL.
7
the fresh 1'011 of film , until tlte roll holder is once more in place
in the case, keep the black p aper wound tig/ztly to preventfog ging the film .
VI. Press on bottom
of camera near tripod
socket and push in the
nickeled catch a t side.
The paper should be in III is
posltion for winding.
b'J.li . V!.
VII. The roll of film in the Kodak is covered with black
paper a nd this must be reeled off before a picture can be taken.
Turn the key slowly to the left and watch in th e little red
celluloid window at the back of the camera. (See Fig. VI. )
vVhen IS to IS turns have been given the figure I will appear.
Turn key until figures I and 2 a ppear at the windows.
The film is now in position for making the first picture.
PAR TIl.
MAKING THE. E.XPOSURES.
S e ction I.
INSTA N T ANEOU S
E.XPOSURES.
(" Snap Shots ....)
The shutters are always set. The two buttons on top of
camera in front of spirit level, operate the shutters. The button
on the right marked (T) is for time exposures and the one on
left ( I) is for snap shots.
USE THE LARGEST STOP.
Snap Shots can only be made when th e largest stop is in the
lens. If a smaller stop be used the ligh t will be so much
reduced that it will not sufficiently impress the image on the
film and failure will result.
Slide A (Fig. 1.) controls th e
stops, of which there are three.
T
'When it is clear down the largest
stop is in place. This is th e one
to use for a ll snap shots, except
where th e sunlight is unusually strong, and there are no
heavy shadows, such as views
on the water or in tropical or
semi-tropical climates, when the
middle stop may be used.
F IG . I.
The smallest stop must never
Button T in Fig. I is the time expos- be used for snap shots or absoure button. Button I is for in stanta nlute failure will result.
eous e xposures (snap shots).
NO.2 STEREO KODAK MAN UAL.
9
LOCATE THE IMAGE..
To take instantaneous pictures the object should be in the
broad, open s unlight but the Kodak should not. The sun should
be ·behind the back or ove r th e shoulder of th e operator.
A im the Kodak at the object to be photographed and locate
the image in the finder.
Any object that does not show in the finder will not show in
the picture.
<" . HOLD IT LEVEL.
It is a bsolutely essentia l that th e Kodak be held level. .if
this is not done it will be i1npossible to obtain a proper stereoscopic effect.
On top of camera will be fo und a spirit level. 'When the bu bble in same is
exactly in th e
center, the camera
is level.
Fig. II. shows
how to hold th e
camera for snap
shots.
If the obj ect be
low dow n, like a
child or a dog, th e
K odak should be
held down level
with th e cente r of
FIG. II.
the obj ect.
Hold the Kodak steady, hold it level and push
the snap shot button.
This makes the exposzwe.
Turn the key slowly to the left until the next tw o numbers appear before the wi ndows in back of Kodak.
The first exposure was ma de on Nos. I and 2 , the second
will be o n Nos. 3 and 4, and so on.
Repeat th e foregoing operations for each instantaneous
picture.
10
EAS T :V!AN KODAK CO)!Pr\:\Y.
SINGLE PICTURES.
By closing the slide before the left hand lens
as shown in Fig. III. the camera is transformed into a Kodak making 3Yz x 3Yz inch exposures.
The Kodak is operated in
FIG. III.
exactly the same manner
fo r single pictures as for
stereoscopies.
F ig. IV. shows th e
manner of holding the
camera fo r single exposure snap shots.
Afte r each single exposure onl y one new section of fi lm
will, of course, be turned into position .
Section II.
TIME EXPOSURES.
I NTERIORS.
I - PUT THE K ODAK I N POSIT ION .
Set in such a position that the
finder will embrace the view
desired.
Th e diagram shows th e
proper position fo r the Kodak .
I t shoul d not be pointed d irectly
I
at a window, as th e g la re of
light will blur the picture. If Diagra m sh owing position of K odak.
a ll the windows cannot be avoided , pull down the shades of
such as come within the range of the fi nder.
-
NO . 2 STEREO KODAK MA NUA L .
II
To make a time exposure, place the Kodak on some firm su p_
port, like a table or tripod. vVhen the Kodak has been properly
a rranged and is p eifectly level, steady it with one hand, and with
the other press
the time exposure button once
to open shutter
(see F ig . 1. ),
a nd g ive th e
prop e r tim e
(using a watch
if more than
two seconds);
press aga in to
close. Turn a
new film into
position as described before.
F I G. I.
(See page 9. )
TIME. FOR. INTERIOR EXPOSURES.
This table is for the largest stop. When th e second stop is
used add one-ha lf more time ; when the smallest stop is used
give four times the time of the table :
vVhite walls and more than one window:
bright sun o utsid e, 2 seconds ;
hazy sun,s seconds;
cloudy bright, 1 0 seconds
cloudy dull, 2 0 second s.
White walls and only one window:
bright sun outside, 3 seconds;
hazy sun, 8 seconds j
cloudy bright , IS seconds;
cloudy dull, 30 seco nd ~.
Medium colored walls and hangings and more th an one window :
bright sun o utside, 4 seconds ;
hazy sun, 10 seconds ;
cloudy brig ht, 20 seconds ;
cloudy d ull , 40 seconds.
12
EASTMAN KODAK COMPANY.
Medium colored walls a nd hangings, and only one window:
bright sun outside, 6 seconds;
hazy sun, 15 secvnds ;
cloudy bright, 30 seconds ;
cloudy dull, 60 seconds.
Dark colored walls and hangings, and more than one window:
bright sun o utside, 10 seconds;
hazy sun, 20 seconds;
cloudy bright, 40 seconds;
cloud y dull, I minute, 20 second s.
Dark colored walls and hangings and only one window :
bright sun outside, 20 seconds;
hazy sun, 40 seconds;
cloudy bright, I minute, So seconds;
cloudy dull, 2 minutes, 40 seconds.
The foregoing is calculated for rooms whose windows get
the direct light from the sky and for hours from 3 hours after
sunrise until 3 hours before sunset.
If earlier or later, the time required will be longer.
TO MAKE A PORTRAIT.
Place the sitter in a chair, partly facing the light, and turn
the face slightly toward the camera ( which should be at the
height of an ordinary table). Centre image in the finder. For
a bust picture the camera should be 6 feet from the figure; for
a three-quarter figure 8 feet and for a full figure 10 feet. The
background should form a contrast with the sitter.
NOTE. In making portraits, where the subj ect is less than 6 feet from the
camera, use the smallest stop and time accordingly. ( See page II.) Do not
try to photograph objects nea.rer than 5 feet. As a general rule, use the middle stop for portraits.
Section III.
TIME EXPOSURE.S IN THE. OPEN AIR..
When the smallest stop is in the lens the light admitted is so
much reduced that time exposures out of doors may be made
the same as interiors but the exposure must be much shorter.
NO .
2
STEREO KO DAK MANUAL.
JJ
WITH SUNSHINE-The shutter can hardly be opened and
closed quickly enough to avoid over-exposure.
VVITH LIGHT CLOUDs-From
cient.
VVITH HEAVY CLouDs- F rom
required.
Yz
to
2
I
second will be suffi-
to 5 seconds will be
The above is calculated fo r the same hours as mentioned
above and for objects in th e open air. F or other hours o r for
objects in the shadow, under porches o r under trees, no accurate directions can be given ; experience onl y can teach th e
proper exposure to give.
STOPS.
Under certain conditions it is
best not to use the largest stop. In
making exposures out-doors, fo r
instance, the ligh t may be so weak
as to make a snap-shot impossible,
yet so powerful that with the large
opening a " time " exposure could
not be made quickly enough to
FIG . II .
avoid over-exposure. The remedy Slide A controls stops and when
is to use th e smallest stop, which ~':n.1i?:~:i~~opsl~ob~llore ~~';~'ns.the
admits only ;q' as much light as the
largest, thus lengthening the time of exposure that can be g iven
without injury.
In ma king interior exposures, especially portraits, it is sometimes desirable to have the otj ect qu ite close to th e camera.
In such cases greater sharpness is obtained by using the smallest stop.
H the smallest stop is used for instantaneous exposures the
light will be so much reduced that it will not sufficiently impress
the image upon the film and absolute failure will result.
By studying th e foll owing rules the beginner will quickly
master the use of the stops:
E ASTM AN KODAK COMPANY .
STOPS .
The stops should be used as follows :
I.
T HE L ARGI!ST- For at! ordinary instantaneous exposures when the
sun sh ines.
2 -3 - THR MIDDLE- For instantaneous exposures when the sunlig ht is
unusua ll y strong and there a re no heavy shadows, such as in views on the sea shore, or on the water, or in tropica l or semi-tro pical climates; al so for
interior time exposures, the time f or which is gi ven in the table on pag es I I
and 1 2.
I-4 . T HE SMALLEST- For time exposures out doors in cloud y w eather.
Never f or £nstantaneozts exposures. T he ti me required for time exposures
on cloudy days w ith smallest s to p w ill range from % second to 5 seconds,
accor d ing to the lig ht. The s ma ller the stop the s ha rp er the pictu re.
W hen setting the stops always see that the one to be used
is broug/tt to the center of the lens whe re it catches.
Abso lute failure w ill result if you use the smalles ..
ex posures.
SlOp
fo r insta ntaneous
Section IV .
FLASH LIGHT PICTURE.S.
By the introduction of Eastman' s F lash Sheets, picture
ta king at night has been wonderfully simplifie d. A package of
fl ash sheets, a piece of card-board, a pin and a match complete
the list of essential extras.
The cost then is :
One Package Ea stman's Flash Sheets,
2SC .
'With flash sheets, no lamp is necessary; there is a minimum
of smoke and they are far safer than any of the self-burning
fl ash powders, besides giving a softer light that is less trying to
th e eyes.
Many interiors can be taken with the flash sheets tha t a re
impracticable by daylight, either by reason of a lack of illumination or because there are windows in the direct line of view
'which ca nnot be darkened sufficiently to p revent the blurring
of the picture.
Evening parties, groups a round a dinne r or card table or
single portraits may be readily made by the use of our fl ash
NO.
2
STEREO KODAK MANUAL.
IS
sheets, thus enabling the amateur to obtain souvenirs of many
occasions whi ch, but for the flash light, would be quite beyond
the range of the art.
PREPARATION FOR THE FLASH.-The camera should be
prepared for time exposure, as directed on page 10 of this
Manual (except that the largest sto p must be used), and placed
on some level support where it will take in the view desired.
Pin a fl ash sheet by one corner to a piece of card-board
which has previously been fixed in a perpendicula r position.
If the card-board is white it will act as a reflector and increase
the strength of the picture.
The flash sheet should always be placed two feet behind and
two to three fee t to one side of the camera. If placed in front,
or on a line with front of Koda k, the flash would strike the
lenses and blur the picture. It should be placed at one side as
well as behind, so as to throw a shadow and give a little relief
in the lig hting. The flash should be at the same height or a
little higher than the camera. The support upon which the
flash is to be made should not project far enough in front of it
to cast a shadow in front of the Kodak. An extra piece of cardboard a foot square placed under the flash sheet will prevent
any sparks from the flash doing damage.
TAKING THE PICTURE..
H aving the Kodak and the flash sheets both in position and
all being in readiness, press the time exposure button once to
open the shutter, stand at arm's length and touch a match to
the lower corner of the flash sheet. There will be a bright flash
which will impress the picture on the sensitive fi lm. Then
push the button aga in to close the shutter. Turn fresh films
into place with th e key ready for another picture.
THE FLASH SHEETS.
The number of sheets required to light a room varies with
the distance of the object farthest from the camera, and the
colo r of th e walls and hangings.
' ;\Then two or more sheets a re to be used they should be
pi nned to the card-board, one above the other, the co rners
slightly ove r-lapping.
F:ASTMAN KObAK CO)'IPANV.
TABLE..
For
..
feet distance and lig ht w alls and hangings, use
10
..
.,
dark
~I
HI'
IS
.. light
15
dark
25
H
light .,
10
"
I
2
sheet.
sheets.
dark
To MAKE A PORTRAIT.-Place the sitter in a chair partly
facing the Kodak (which should be at the height of an ordinary
table), and turn the face slightly towards the Kodak, The
proper di stance from th e camera to the subj ect can be ascertained by looking at th e image in th e finder. For a three
quarter picture this will be 8 feet, and for a full figure IO feet.
The flash should be on the side of the Koda k away from
th e face; that is, the sitter should not face it. The fl ash should
not be higher than the head of the sitter.
To MAKE A GRouP.-Arrange the chairs in the form of an
a re, facin g the K odak, so that each chair will be exactly the
same distance from it. H a lf the persons composing the group
should be seated and the rest should stand behind the chai rs,
If the group is la rge any number of chairs may be used, but
none of the subj ects should be seated on the fl oor, as sometimes seen in la rge pictures, because the perspective would be
too violent.
BACKGROUNDS. - In making single portraits or groups, care
should be taken to have a suitable background against which
the figures will show in relief; a light background is better
than a dark one, and often a single figure or two will show up
well against a lace curtain. For la rger groups a medium light
wall will be suitable.
The .finder on the Kodak will aid the operator in composing
the groups so as to get the best effect. In order to ma ke the
image visible in the finder, the room will have to be well lighted
with ordinary lamplight, which may be left on while the picture
is being made, provided none of the lights are placed so that
they show in th e finder.
Eastman's F lash Shee ts burn more slowly th an flash powders, producing a much softer light, a nd a re, th erefore , far pref-
NO. 2 STEREO kODAK MANuAL.
I7
erable in portrait work; the subject, however, should be
warned not to move, as the picture is not taken instantaneously,
about one second being required to burn one sheet.
EASTMAN'S FLASH CAR. TR.IDGE.S, FLASH
LAMPS AND FLASH POWDER.
Eastman's Flash Cartridges or Eastman's Flash Lamp and
Powder may be substituted for the sheets, if desired. We
recommend the sheets, however, as more convenient, safer,
cheaper and capable of producing tbe best results. The powder or cartridges are only superior where absolutely instantaneous work is essential.
PART III.
REMOVING THE FILM.
No dark room is required in changing the spools in th e No.
Stereo Kodak. The operation should, however, be performed in a subd ued light.
I. When the last film has been exposed, turn th e key about
IS half turns until the letter S (stop ) appea rs before th e red
window which is nearest th e winding key.
II. Provide an extra
spool of fi lm to fit this
Kodak and take a position at a table as far
as possible from any
window.
III. Unloose th e
:atch at the bottom
md take the roll hold: r from th e box, as
3hown in F igs. I. and
II., page 5.
IV. H olding it taut
so as to wind tightly,
turn the key until the
paper is a ll on the
reel. See F ig. I.
FIG. I.
V. Hold the r ee l
tightly with one hand
to prevent the paper from loosenmg, and fasten down th e black
paper by means of the gummed slip, which wi ll be found at end
of roll, to prevent the paper from unwinding. Loosen th e key
by turning to th e right and pull it out.
2
NO . 2 STEREO KODAK MANUAL.
VI. Remove the film
from the Kodak by swinging the ratchet carrier out
with the roll, which is
then merely pulled away
from the ratchet web,
when it wi ll be free. See
Fig. II.
VII. Wrap up the roll
immediately to prevent
the light from injuring the
film.
VIII. Now take the
empty spool from its
recess and transfer it to
the winding end of the
Kodak.
IX. Fit th e web in ratchet carrier into the slotted end of the
spool and swing ratchet-carrier and spool back into place ;
insert th e key and turn to the left until it is screwed firmly into
place. This fo rms a new reel.
X. Load as described in Part I, page S. The roll of exposurd can now be mailed to us fo r finishing (see Price-List) , or
you can do the developing and printing yourself.
NOTE: I n mailinii us film for development, do not fail to mark the package plainly with your name and address, and write us a letter of advice, with
remittance.
CLEAN LENSES.
Dusty or dirty lenses are frequently the sole cause for photographic fai lures. Lenses should be frequ ently examined by
looking through the lens, a nd if found to be dirty, should be
wiped, both front and back, with a clean, soft, linen handker chief. It is we ll, also, to occasionally wipe out the inside of
Kodak with a slightly damp cloth . In dusty summer weathe r
this needs especial attention. Large spots of dust or dirt on
th e lenses will cause defects in the picture ; while, if the lenses
are evenly cove red with a film of dust or dirt, the effect will be
to cut off a great deal of the light and make the picture undertimed.
20
DIMMED
EASTMAN KODAK COMPANY.
FINDERS AND HOW TO
THEM BRIGHT AGAIN.
MAKE
For some cause which is not thoroughly understood, g lass
will sometimes" sweat" to such an extent as to cover it with a
sort of film, which, of course, makes it very dull whether it be
used as lens or >mirror. G lass that is tightly packed in cases as
well as that which is exposed to the air is liable to take on this
film, supposedly from peculiar atmospheric conditions.
Whatever the~ause, the result is the occasional dimming of
find ers and lenses. In the case of lenses it is, of course, easy
enough for anyone to wipe them off. With find ers the trouble
is sometimes in the mirror, which necessitates opening the
finder and wiping the mirror by means of a soft cotton cloth on
a bent wire. With many kinds of Kodaks anyone can r eadily
get at the inside of the finder and in five minutes restore it to a ll
its original brilliancy.
To clean the mirrors in the brilliant finders of the No. 2
Stereo Kodaks, simply remove the two screws which hold in
frame on top of finder and lift out fram e. Now turn the Kodak
over and the "brilliant" lens of finder will drop out and the
mirror can be easily cleaned.
IN GENE.RAL.
vVe recommend everyone to do their own developing. vVith
our Special outfit it is very simple and inexpensive, no regular
clark room is required, and the operator can obtain proofs from
the negatives as soon as they are dry.
If, however, the Kodaker prefers to have us "Do the rest,"
he can send his exposures to us by mail.
We have larger and better facilities for developing and
printing and more skilled operators than anyone else, and it is
to our interest to get the best results from every negative.
PART IV.
DEVELOPING.
Provide an Eastman's Specials x 7 Developing and Printing
Outfit.
I
4
I
I
'THE OUTFIT CONTAINS:
Eastman's Candle Lamp,
4 Ounce Bottle Solio Toning
$0 25
Developing Trays,
Solution,
.
.
60
JO
Glass Beaker,
.
.
.
I Bottle of Bromide of Potas·
12
5 x 7 Printing Frame, Special ,
sium,
.
.
.
10
35
.
.
I Ounce of Glycerine,
5 x 7 Glass for same,
05
05
Stirring Rod,
.
.
.
10
I Manual,
05
Dozen Developing Powders,
50
Lb. Hyposulphite Soda,
.
10
3 '7
Dozen Sheets 5 x 7 Solio
Paper,.
..
60
Price Complete, neatly packed, $2 .00
Also provide a pair of shears, a pitcher of cold water (pre ferably ice water) a pail for slops, and a dark room having a
.
shelf or table.
*This outfit cannot be shipped by mail.
22
EAS TMAN KODAK COYIPANY .
Bya dark r oo m is meant one that is wholly d a rknot a r ay of light in it. Such a ro om can easily be
secured at night almost any where. The reason a dark
room is required is that the film is ex tremely sensitive
to white light, either dayligh t or lamplig h t, and w ould
be spoiled zl exposed to 'it even for a fraction of a
second .
H aving provided such a room or closet,
where, when the door is closed, no ray of
light can be seen :
Set up on the tab le or shelf the Orange
Candle L am p, and light it as directed in the
circular which comes in the box in which the
lamp is enclosed.
THE LAMP.
The lamp gives a subdued yellow or
orange light which will not injure the film unless it is held close
to it. Set the lam p on the table at least eighteen inches from
and with the side toward the operator.
I. Fill one of the trays nearly full
of water (first tray ).
II. Open one of the developer powders, then put the contents ( two
chemicals) into the beaker a nd fill it
up to the ring with cold water. Stir
until dissolved with the wooden stirring rod and pour into second tray.
III. To develop Transparent Film
unroll the film and detach the entire
strip from the black paper.
IV. Pass the film throug h the tray of
clean, cold water as shown in the cut, 'i;"~~::~~
holding one end in each hand. Pass
through the water several times, th at there may be no bubbles
remaining on th e film. vVhen it is thoroughly wet, with no air
bubbles, it is ready for development.
V. Now pass the film through the deve loper in the same
manner as described for wetting it, and shown in cut. Keep it
constantly in motion, and in about one minute the high lights
will begin to darken and you will readily be able to distinguish
the unexposed sections between th e negatives and in about two
minutes will be able to distinguish objects in the picture. If the
NO. 2 STEREO KODAK MANUAL.
23
negatives have all had the same exposure, development can be
completed before cutting the negatives apa rt-if, however, one
or more pairs of negatives flash up more quickly than the others
they should be cut out of the strip with a pair ()f shears and
transferred back to the tray of clear water, where they may
remain until the balance of strip has been developed and can
then be developed one pa ir at a time. As the negatives have
been exposed in pairs it will be readily seen that they should also
be developed in the same manner. Be sure that any negatives
put back in the tray of clear water are kept fully immersed.
Keep the strip which is being developed, constantly in
motion, allowing the deve loper to act 5 to I O minutes. The
progress of development may be watched by holding the negatives up to the lamp from time to time.
V I. After completing development cut the negatives a part
with a pair of shears, transfer to the third tray and rinse two or
three times with clear, cold water.
Always cut the negatives apart in pairs, that is, leave the
twin negatives attached to each other to avoid confusion in
printing.
If you find the twelve (six Stereo) exposure strips too long to
handle conveniently in the above manner we advise that you
use th e six exposure cartridges, as the great convenience of
strip development more than offsets the short time taken to
insert an extra spool.
ANOTHE.R WAY.
vVe advise the foregoing method of development. If desired,
however, the negatives
may be cut apart
before development is
commenced, either by
th e following method
or by the use of a No.
2 Film Cutting Board.
(See price list, page 32.)
a . Unroll the fi lm and
cut the exposures apart in
pairs as shown in Fig. 1.
FIG. T.
EASTMAN KODAK COMPANY.
In unrolling the film preparatory to development, care must be taken
that the end be not allowed to roll up over the paper. The exposures should
be cut apart with the PAPER ON TOP .
Fig. II shows a cartridge unrolled with the film on top. To correct this
simply turn back the film as indicated by the dotted lines, thus bringing the
film under the paper.
b. Put the exposures into the first tray pair by pair /ace dow".. put
them in edgewise, to avoid air bells, and immerse them fully.
Cover the tray with a bit of brown paper to keep out the light from the
lamp.
c. Take one pair of the expos·
ures from the water and immerse
it, fa ce down~ in the tray of developer (second tray). Rock it back
and forth to prevent streaks and air
bubbles; in a bout I minute the film
will begin to darken in spots. rep'
resenUng the lights of the picture,
and in about two minutes the operator will be able to distinguish ob·
Jects in the picture. The developer
,,
should be allowed to act 5 to 1 0
,,
minutes. The progress of the development may be watched by holding
FIG.IJ.
.....
_....
WRONG.
the negauves from time to time up
to the lal!>p.
d. Transfer the developed film t o the third tray a nd rinse two or three
times with , vater, leaving it to soak while the next films are being developed.
NOTE : Six pairs of negat ives can be developed one after the other in
one portion of the developer; then it should be thrown away and a fresh
portion mixed.
Only one pair of negatives should be developed at a time until the operator becomes expert, then he can manage three or four in the tray at one time
and the developer will answe r for t wo or three before being exhausted.
As each successive negative is developed it should be put with the preceding negatives, in the washing tray and the water changed twice to prevent
the developer remaining in the films from staining them.
_-
- ~
From this stage th e treatment of negatives is the same
whether they have been developed in pairs or in the strip.
VII. Put six tablespoonfuls of Hypo-sulphite of Soda into
the fourth tray, fill two-thirds full of cold water, and stir until
dissolved. This is called the fixing bath.
VIII. Immerse the negatives one by one in the fixing bath
and leave until they are entirely clear of white spots and are
transparent instead of milky by transmitted light, moving them
about occasionally to ensure even fixing. This will require
about 10 mllluteS.
:\0.
2 STEREO KODAK MANUAL .
25
IX. The yellow shade can be removed from the lamp as
soon as all the exposures have been fixed.
X . Pour off the fixing solution into the slop bucket, and
fill the tray with clear, cold water; repeat this at intervals of
five minutes, five or six times, keeping the negatives in motion,
or transferring them back and forth to tray NO.3, one by one,
to ensure the water acting evenly upon them.
The fixing solution must only be used in tray NO.4, and the
negatives, after fixing, must not be put in either No. lor NO.2
trays. Neither must any of the fixing solution be allowed to
touch the films, through the agency of the fingers or otherwise,
until they are ready to go into the fixing bath, otherwise they
will be spotted or blackened so as to be useless.
XI. vVhen the negatives are thoroughly washed, put one-half
ounce of glycerine into one pint of water (four portions measured with the developer glass), stir well and soak the negatives
in the solution for 5 minutes, then remove them and wipe off
the surplus moisture with a soft, damp cloth, and pin them by
the four corners, face up, to a flat surface to dry.
The glycerine solution may be used repeatedly.
Use all solutions cold, employing ice in extremely hot
weather.
The trays and beaker should now be rinsed out and set
away to drain and dry.
vVhen the negatives are dry they are ready for printing, as
described in Part V.
DE.FECTIVE NE.GA TIVES.
By following closely the foregoing directions, the novice can
make seventy-five per cent., or upwards, of good negatives.
Sometimes, however, the directions are not follow ed, and
failures result.
To forewarn the Kodaker is to forearm him, and we therefore describe the common causes of failure.
Under=E.xposure.
Caused by making snap-shots indoors, or in the shade, or
when the light is weak, late in the day, or by closing the lens too
soon on time exposures.
EASTMAN KODAK COMPANY.
O ver =E.x posure.
Caused by too much light.
Negatives de velop evenly, shadows a,most as fa st as high lights. No
contrast, and no deep shadows. Over-exposure can be overcome in the
development by the addition of bromide of potassium t o the developer. T he
printing and de veloping outfit includes a package of brom ide with directions
for its use. The novice will soon learn to recognize over-exposure and to
apply the remed y .
After the bromide has been added to the developer , it should not be used
for ano ther negative unless it is known to have been over-exposed .
O v e r= Dev elopment.
Caused by leaving the negatives too long in the developer.
In this case the negatives are very strong a nd intense by transmitted light
a nd require a very long time to print. The remedy is o bvious.
Under=D eve lopment.
Caused by removal from the develop er too soon.
An under-developed negative differs from an under-exposed one in that it
is ap t to be thi.l and full of detail, instead of ha r sh and lacking in detail. Ii
the development is carried on as before directed. this defect is not liab le to
occur.
Spots, Stre ali.s, Etc.
Air bells on the film in the developer or fixing baths are liable to cause
spots, and streaks are caused by allowing the film to rema in uncovered in part
by the various solutions while in them .
White, milky spots are evidence that the negatives have no t been properly
fixed, and the negative should be put back into the fixing bath and the n
re-washed.
Always Deve lop Film
}i'ace Dow n.
PAR T V .
PRINTING .
In making stereoscopic prints, the aim is to convey the idea
of perspective and to depict animated life. This can be easily
accomplished by following the instructions closely and by using
a little care in the matter of trimming and transposing the negatives.
The operation of putting the Solio paper and the film face
to face in printing, places the right hand print on the left hand
side, and vice ve1'sa. To overcome this, trim a nd transpose
the negatives before printing in the following manner: L ay
the cutting guide, which accompanies this Kodak, on th e face
of the right hand negative so as to leave small margin for trimmin g on the right hand edge. Note some well-defined object
in the middle distance which is intersected by the inner straight
edge AA. Now transfer guide to left-hand negative so that line
AA intersects same object at same point. If margins of negati ve remain on both left and right sides of guide-mask, cut off
margin on left. Now place guide on right hand negative once
more a t identically the same spot as before and cut off margin
from right hand end. It must be remembered that centers
which you work from must be at such point as will allow slight
trim at each side of mask . If first point tried does not give this
result, try another. There is a common center. Keep mask
para llel with bottom of film to insure vertical lines when cutting.
After the outer edges of negatives have been trimmed, cut
the negatives apart at intersection and transpose. In transposing, bring the trimmed edges of both negatives together, both
face up. Now, with gummed slips, paste the negatives face up
to the glass of printing frame. On these lay a piece of Solio
paper, face down. Replace back of printing frame and secure
;3prings.
28
EASTMAN KODAK COMPAN Y.
The operation of putting in the Solio paper should be performed in a subdued light, that is, in an ordinary room as far as
possible from any window. The unused paper should be
returned to its e nvelope and kept in a drawer a way from the
light.
The back of printing frame is hinged to permit the inspection of one section of th e print at a time without destroying its
register with th e negatives.
The printing frame, when filled as directed, should be la id
glass side up in th e strongest light obtai nable (sunlight preferred ) until th e light passing throu gh the negatives into the
sensiti ve paper has impressed itself upon it. The progress in
printing may be examined from time to time by removi ng the
frame from the strong light and opening one part of the hinged
back, keeping th e other section fastened to preve nt the paper
from shifting. The printing should be continued until the print
is a little darker than the desired shade.
Place print without previous washing in th e following combined toning and fixing bath:
4 oz. Eastman's Solio Toning Bath.
8 oz. Cold Water.
Pour the toning solution into one of th e trays and immerse
the prints one after the other in the toning bath. Five or six
prints can be toned together if they are kept in motion and not
allowed to lie in contact. Turn the prints all face down and
then face up and repeat this a ll th e time they are toning. The
prints will begi n to change color almost immediately from
reddish brown to reddish yellow, th en brown to purple. The
change wiIl be gradua l from one shade to a nother, and the
toning should be stopped when the print gets the shade
desired.
Twelve ounces of the diluted toning solution will tone two
dozen prints; after that a new solution should be made same as
befo re.
'When the proper shade has been attained in toning bath, the
prints should be transferred for five minutes to the foll owing
salt solution to stop the toning:
Salt, I oz.
Water, 32 QZS.
NO . 2 STEREO KODAK MANUAL.
Then transfer the prints to the washing tray and wash one hour
in running water, or in 16 changes of water.
The prints can then be laid out and dried between blotting
papers. 'When d ry , the prints a re trimmed for mounting.
In trimming the prints, choose a base line that cuts a certain
point in the foreground of each print, and trim along that line.
The top should th en be trimmed parallel with the base line.
Solio paper can be purchased ready trimmed for stereoscopic
work. (See price list, page 31.)
If desired , the prints may be made without transposing the
negati ves. vVe advise th e foregoing method, however, as once
the negatives are transposed and pasted on the printing glass,
<:5 m any prints as may be desired can be made without any
furth er ·transpositions. By th e other method, the prints are
made befo re th e negatives a re tri mmed and cut a part. The
prints are th6n trimmed in the manner described for trimming
negatives, a nd a re transposed in mounting.
In making prints from single negatives th e trimming of the
negative is of cou rse unnecessary. The print is made in the
man ner described in the foregoing and is trimmed and mounted
as desired.
EASTMAN KODAK CO. ,
Rochester, N. Y.
30
EASTMAN KODAK COMPA N Y.
DON'T.
Don't fail to hold the K odak level.
Don't try to make time exposures while holding the Kodak in
hands.
Don't fail to turn two unexposed sec tions of film into place
after each stereoscopi c exposure.
Don't a llow the black paper to loosen on the spool in loading
and unloading the Kodak or the film will become fogged.
Don't separate twin negatives until they have been trimmed.
Don't fail to push back slide in front of left lens after you have
finished making single exposures.
Don't put your trays away without washing them.
Don't let the hypo get out of its place-the fixing tray.
Don't try to make s na p-shots indoors, on shady ve randas or
on dark days. You will only waste your fi lm.
PRICE LIST.
NO.2 Stereo Kodak for pictures 3Yz x 3Yz stereoscopic, $r5· 00
Leather Hand Carrying Case with shoulder strap,
2.00
Transparent Film Cartridge, I2 exposures, 3Yz x 3Yz,
for 6 pictures stereoscopic,
.60
Do., 6 exposures for 3 pictures stereoscopic,
.3 0
Do., Double-Two, exposures for 2 pictures stereoscopic,
.20
Solio Paper, 3:4 x 6, per pkg. of 2 doz.,
.25
Eastman's Special 5 x 7 Developing and Printing Outfit, including Solio Paper and Toning Solution for
24 prints, (see page 2I),
2.00
Eastman's Hydrochinon Developer Powders, per doz.,
.5 0
Do., per Yz doz.,
.25
Do., in hermetically sealed glass tubes, per box of
5 tubes,
.25
Eastman's Pyrogallic Developer Powders, per doz.,
.5 0
Do., per Yz doz.,
.25
Do., in hermetically sealed glass tubes, per box of
5 tubes,
.25
Eastman's Eikonogen Developer Powders, per doz.,
.50
Do., per Yz doz.,
. 25
Do., in hermetically sealed glass tubes, per box of
5 tubes,
.25
Eastman's Dekko Developer Powders, per doz.,
.5 0
Do., per Yz doz.,
.25
Do., in hermetically sealed glass tubes, per box of
.25
5 tubes,
No. I Kodak Tripod, folds in 4 sections (Folding Lugs),
3·75
2.25
No. I Eastman Tripod, folds in 3 sections, .
1.5 0
Bulls-Eye Tripod, folds in 2 sections,
Combined Toning and Fixing Solution for Solio, per 8
oz. bottle,
.5 0
Toning and fixing Solution can be shipped by mail in 4
ounce bottles as follows: 4 ounces Toning Solution ( 20e. extra postpaid),
Kodak Push Pins (for pinning up film negatives while
.25
drying), per box of 12,
Eastman's Indexed Negative Albums to hold roo
3Yz x 3Yz film negatives,
· 75
/'
EASTMAN KODAK COMPANY.
Hyposulphite Soda, pulverized, per pound,
Bromide Potassium, per ounce bottle,
Eastman's Flash Lamp,
Eastman's Flash Powder, per ounce, .
Eastman's No. I Flash Cartridges, per pkg., Yz doz.,
Eastman's No.2 Flash Cartridges, per pkg., Yz doz.,
Eastman's NO.3 Flash Cartridges, per pkg., Yz doz.,
Eastman's Flash Sheets, per pkg., Yz doz.,
Eastman's Photo Paste, per 3 oz. tube,
Eastman's Photo Paste, per 5 oz. tube,
Eastman's Kodak Dark Room Lamp, No. I, r in. wick,
Eastman's Kodak Dark Room Lamp, No.2, ji in. wick,
Eastman's Improved Orange Candle Lamp,
Developing, Printing and Mounting, per pair,
Developing only, per pair, .
Printing and Mounting only, per pair, .
$
.10
. IS .
1. 25
.60
.60
.40
.25
.25
.15
. 25
1.5 0
1.00
.2 5
.25
.12
.16
On orders for developing and printing less than one·half dozen, 25 cents
extra will be charged. Prints are always furnished mounted unless otherwise
ordered.
Eastman's Film Developing Clips for holding film during strip development, 3Yz inch, per pair,
,. Picture Taking and Picture Making," I20 pages, profusely illustrated, card covers,
Stereo Mounts, gray, p er doz.,
Eastman's Film Cutting Board, for cutting up films for
development. Order No. 2 for use with No. 2
Stereo Kodak Films,
.25
.50
.09
.25
EASTMAN KODAK CO.,
Rochester, N. Y.
TERMS.
The foregoing prices are strictly net, except to regular
dealers who carry our goods in stock.
For the convenience of our customers we recommend that
they make their purchases from a dealer in photographic goods,
as by so doing they can save both time and expressage.
EASTMAN KODAK COMPANY,
Rochester, N. Y.
E asttnan's
F iltn Dev eloping Clips
do away with the possibility of stained or poisoned
fingers. A great convenience in strip developing.
Heavily nickeled and suitable for hanging up film
while drying.
One pair 3 Yz i nch f or u se w ith
No.2 Stereo Koda k. Fillns, 2 5c.
Sold by Kodak dealers everywhere.
EASTMAN KODAK CO.
Rochester, N. Y.
U
If it isn't an Eastman
it isn't a Koda1{."
">
/
دانلود
فقط یک یادآوری دوستانه. می توانید سند را درست در اینجا مشاهده کنید. اما مهمتر از همه، هوش مصنوعی ما قبلاً آن را خوانده است. این می تواند موارد پیچیده را به زبان ساده توضیح دهد، به سوالات شما به هر زبانی پاسخ دهد و به شما کمک کند به سرعت حتی طولانی ترین یا پیچیده ترین اسناد را پیمایش کنید.
تبلیغات