IPOE-E174
1
Industrial 1-Port 802.3bt PoE++ to 4-Port 802.3af/at
Gigabit PoE Extender
PoE Solution for Long-reach Distance
PLANET IPOE-E174 is an industrial 1-Port 802.3bt PoE++ to 4-Port 802.3af/at
Gigabit PoE Extender designed especially for the point to multipoint PoE application.
The IPOE-E174 can obtain a maximum of 95-watt PoE power from 802.3bt PoE++ input port and supplies a maximum of 75-watt PoE power budget for 4 PoE output ports, extending both the reach of Gigabit Ethernet Data and IEEE 802.3at Power over Ethernet over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to 200m where up to 4 powered devices (PDs) can be powered at the same time. The
IPOE-E174 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter.
Power
Supply
DC Input
DC
Power
802.3bt PoE++ (95W)
Industrial
Switch
Data
IEEE 802.3at PoE+ (25W)
Power
Supply
DC Input
DC
Power
Industrial
Switch
Data
802.3bt PoE++ (95W)
IEEE 802.3at PoE+ (25W)
PoE PTZ IP Camera
IEEE 802.3at PoE+ (15W)
IEEE 802.3at PoE+ (15W)
IEEE 802.3at PoE+ (15W)
IEEE 802.3at PoE+ (15W)
PoE Dome IP Camera
Data Sheet
Physical Port
• Five 10/100/1000BASE-T Gigabit RJ45 interfaces
– 1-port data + power input
– 4-port data + power output
Power over Ethernet
• 1-port data + power input
– Complies with 802.3bt Power over Ethernet Plus Plus end-span and mid-span PD
– Complies with IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD
– Supports PoE input power up to 95 watts
• 4-port data + power output
– Complies with IEEE 802.3af/at PoE/end-span PSE
– Up to 4 IEEE 802.3af/at devices powered
– Supports PoE power up to 30 watts for each PoE port
– Auto detects powered device (PD)
• Extends the range of PoE to an additional 100 meters
(328ft.)
• Forwards both Ethernet data and PoE power to remote device
Layer 2 Features
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• Integrates address look-up engine, supporting 2K absolute
MAC addresses
• 9K jumbo frame support in 1000Mbps duplex mode
• Automatic address learning and address aging
Industrial Case and Installation
• IP30 metal case
• DIN-rail and wall-mount designs
• Supports 6000V DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
• No external power cable required for installation
• Plug and Play installation
1
IPOE-E174
Environmentally-hardened Design
With industrial-grade IP30 metal case, the IPOE-E174 provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C , the
IPOE-E174 can be placed in almost any difficult environment.
Intelligent LED Indicator for Real-time PoE Usage
The IPOE-E174 helps users to monitor the current status of PoE power usage easily by its advanced LED indication. Called “PoE Power Usage” shown in percentage, the front panel of the IPOE-E174 has three LEDs indicating 20 , 40 and 60 watts of PoE power usage . With these LED indications, you can monitor the PoE power status of the IPOE-E174 efficiently.
Plug and Play, Easy Cabling Installation
The IPOE-E174 can be easily installed by way of Plug and Play. It is used between a power source equipment (PSE) and the PD. The IPOE-E174 injects power to the PD without affecting the data transmission performance. The IPOE-E174 offers a cost-effective and quick solution to doubling the standard range of PoE from 100 to 200 meters. The IPOE-E174 is designed in a compact box containing 5 RJ45 ports, of which 1 "PoE IN" port functions as PoE (Data and Power) input and 4 "PoE OUT" ports on the other side functions as PoE (Data and Power) output . The "PoE OUT" port is also the power injector where DC voltage is transmitted over Cat. 5/5e/6 cable, and data and power are simultaneously transferred between the PSE and PD.
2
IPOE-E174
Applications
One Power Source for Multi Powered Devices
Is 100-meter cable long enough for a wide range of IP surveillance deployments? The answer is certainly not. To achieve the benefits of IP surveillance where IP cameras are installed in a remote location, PLANET IPOE-E174 is very useful for expanding the network already set up without worrying about the cabling distance limitation. In contrast, the conventional networking does not have the flexibility of network expansion.
PoE
PoE
PoE
PoE
PoE
PoE
PoE
PoE
PoE
PoE
802.3bt PoE++ In
PoE+Wireless AP
PoE+ Camera 1
PoE+ Camera 2
PoE+ Camera 3
PoE
PoE
1000BASE-T UTP with PoE
1000BASE-T UTP with Ultra PoE
The IPOE-E174 industrial 1-Port 802.3bt PoE++ to 4-Port 802.3af/at Gigabit PoE Extender requires very little installation time and does not require any additional setup or programming by using standard RJ45 cable from power sourcing device, such as 802.3bt PoE++ injector supplying 802.3bt PoE++ power, to the IPOE-E174 and converting power for 4 powered devices that are IEEE 802.3af/at PoE standard compliant, meaning any additional power adapter for
IP cameras and wireless access points is not necessary.
DC
Power
802.3bt PoE++ Injector
Data
PoE
100 meters
PoE
PoE
100 meters
IPOE-E174
PoE 100 meters PoE 100 meters
Switch
DC
PoE
PoE
Power Line (DC)
1000BASE-T UTP
1000BASE-T UTP with PoE
1000BASE-T UTP with Ultra PoE
3
Product Specifications
Model
Hardware Specifications
Data Rate
IPOE-E174
Network Connector
Switch Architecture
MAC Address Table
Switch Fabric
Switch Throughput
Flow Control
Jumbo Frame
ESD Protection
Surge Protection
Enclosure
Installation
Dimensions (W x D x H)
Weignt
Power Consumption
10/100/1000Mbps
PoE In Port
- 1 x 10/100/1000BASE-T Ethernet with 802.3bt PoE++ “Data + DC” in
- Auto MDI/MDI-X, auto-negotiation RJ45 connector
PoE Out Port
- 4 x 10/100/1000BASE-T Ethernet with IEEE 802.3af/at PoE “Data + DC” out
- Auto MDI/MDI-X, auto-negotiation RJ45 connector
Store-and-Forward switch architecture
2K MAC address table with auto learning function
10Gbps
7.44Mpps @ 64Bytes
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
9Kbytes
Air 8KV DC
Contact 6KV DC
6KV
IP30 metal case
DIN-rail kit and wall-mount ear
32 x 87.8 x 135 mm
430g
5.6 watts/19.11 BTU (Power On)
6.5 watts/22.18 BTU (Full loading without PoE function)
82.3 watts/280.82 BTU (Full loading with PoE function)
Power over Ethernet
PoE Standard
PoE Power
Power Pin Assignment
PoE Power Budget
PoE in Port
- IEEE 802.3bt PoE++ Type 4 standard PD
- PoH (Power over HDBASE-T)
- IEEE 802.3at PoE+ end-span/mid-span PD
Per PoE out Port
IEEE 802.3at Power over Ethernet Plus end-span PSE
PoE in Port
50~57V DC, max. 95 watts
Per PoE out Port
44~55V DC, max. 30.8 watts
PoE in Port
1/2(-), 3/6(+), 4/5(+), 7/8(-) or 1/2(+), 3/6(-), 4/5(+), 7/8(-)
Per PoE out Port
1/2(+), 3/6(-)
75 watts (max.) @ 802.3bt PoE++ Type 4 input
60 watts (max.) @ 802.3bt PoE++ Type 3 input
75 watts (max.) @ PoH input
25 watts (max.) @ 802.3at PoE+ input
Standards Conformance
Regulatory Compliance
Stability Testing
Standards Compliance
FCC Part 15 Class A, CE
IEC60068-2-32 free fall
IEC60068-2-27 shock
IEC60068-2-6 vibration
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
IEEE 802.3az Energy Efficient Ethernet(EEE)
Environment
Operating Temperature
Storage Temperature
Temperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Temperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
IPOE-E174
4
IPOE-E174
Dimensions
Top View
Rear View
Mounting Kit
Side View Front View
30W 60W 90W
PoE Input
LNK
AC T
PoEin-Use
LNK
ACT
PoE IN
PoE Power Usage
20W 40W 60W
1
2
3
4
Side View
DIN-Rail Kit
Bottom View
Mounting Kit
Unit: mm
Ordering Information
IPOE-E174
Related Products
IGS-6325-8UP2S2X
IGS-6325-8UP2S
IGS-5225-4UP1T2S
IPOE-171-95W
IPOE-171-60W
IGUP-1205AT
IGUP-2205AT
IGUP-805AT
IGS-5225-8P2T2S
IGS-4215-8P2T2S
IPOE-260 Series
IPOE-162S
UPOE-800G
UPOE-1600G
UPOE-2400G
1-Port 802.3bt PoE++ to 4-Port 802.3af/at Gigabit PoE Extender
Industrial L3 8-Port 10/100/1000T 802.3bt PoE + 2-Port 100/1000X SFP + 2-Port 10G SFP+ Managed Ethernet Switch
Industrial L3 8-Port 10/100/1000T 802.3bt PoE + 2-Port 100/1000X SFP + Managed Ethernet Switch
Industrial L2+ 4-Port 10/100/1000T 802.3bt PoE + 1-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
Industrial Single-Port 10/100/1000Mbps 802.3bt PoE++ Injector (95 Watts, -40~75 degrees C, 12~48V DC)
Industrial Single-Port 10/100/1000Mbps 802.3bt PoE++ Injector (60 Watts, -40~75 degrees C)
Industrial 2-Port 100/1000X SFP to 1-Port 10/100/1000T 802.3bt PoE++ Media Converter
Industrial 2-Port 100/1000X SFP to 2-Port 10/100/1000T 802.3bt PoE++ Media Converter
Industrial 1-Port 100/1000X SFP to 1-Port 10/100/1000T 802.3bt PoE++ Media Converter
L2+ Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T+ 2-Port 100/1000X SFP Managed
Ethernet Switch
Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
Industrial 2-port 10/100/1000T 802.3at PoE+ Injector Hub
Industrial IEEE 802.3at Gigabit High Power over Ethernet Splitter
8-Port Gigabit 802.3bt PoE++ Managed Injector Hub (400 watts)
16-Port Gigabit 802.3bt PoE++ Managed Injector Hub (600 watts)
24-Port Gigabit 802.3bt PoE++ Managed Injector Hub (800 watts)
PLANET Technology Corporation
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City
231, Taiwan (R.O.C.)
Tel: 886-2-2219-9518
Email: [email protected]
Fax: 886-2-2219-9528 www.planet.com.tw
IPOE-E174
PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of their respective owners. Copyright © 2020 PLANET Technology Corp. All rights reserved.
5
