IPOE-E174
Industrial 1-Port Ultra PoE to 4-Port 802.3af/at
Gigabit PoE Extender
PoE Solution for Long-reach Distance
PLANET IPOE-E174 is an industrial 1-Port Ultra PoE (IEEE 802.3bt) to 4-Port
802.3af/at Gigabit PoE Extender designed especially for the point to multipoint PoE application. The IPOE-E174 can obtain a maximum of 75-watt PoE power from ultra
PoE (IEEE 802.3bt) input port and supplies a maximum of 60-watt PoE power budget for 4 PoE output ports, extending both the reach of Gigabit Ethernet Data and IEEE
802.3at/802.3af Power over Ethernet over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to 200m where up to 4 powered devices (PDs) can be powered at the same time.
The IPOE-E174 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter.
Data
Power
Ultra PoE (60W)
IEEE 802.3at (25W)
IEEE 802.3at (25W)
PoE PTZ IP Cemera
Physical Port
• Five 10/100/1000BASE-T Gigabit RJ45 interfaces
• 1-port data + power input
• 4-port data + power output
Power over Ethernet
• 1-port data + power input
• Complies with ultra Power over Ethernet end-span and midspan PD
• Complies with IEEE 802.3at Power over Ethernet Plus endspan/mid-span PD
• Supports PoE input power up to 75 watts
• 4-port data + power output
• Complies with IEEE 802.3af/at PoE/end-span PSE
• Up to 4 IEEE 802.3af/at devices powered
• Supports PoE power up to 30 watts for each PoE port
• Auto detects powered device (PD)
• Extends the range of PoE to an additional 100 meters (328ft.)
• Forwards both Ethernet data and PoE power to remote device
Layer 2 Features
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• Integrates address look-up engine, supporting 2K absolute MAC addresses
• 9K jumbo frame support in 1000Mbps duplex mode
• Automatic address learning and address aging
Industrial Case and Installation
• IP30 metal case
• DIN rail and wall-mount design
• Supports 6000V DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
• No external power cable required for installation
• Plug and Play installation
Data
Power
Ultra PoE (60W)
IEEE 802.3at (15W)
IEEE 802.3at (15W)
IEEE 802.3at (15W)
IEEE 802.3at (15W)
PoE Dome IP Camera
1
IPOE-E174
Environmentally Hardened Design
With industrial-grade IP30 metal case, the IPOE-E174 provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the IPOE-E174 can be placed in almost any difficult environment.
Intelligent LED Indicator for Real-time PoE Usage
The IPOE-E174 helps users to monitor the current status of PoE power usage easily by its advanced LED indication. Called “PoE Power Usage” shown in percentage, the front panel of the IPOE-E174 has three LEDs indicating 20, 40 and 60 watts of PoE power usage. With these LED indications, you can monitor the PoE power status of the IPOE-E174 efficiently.
Plug and Play, Easy Cabling Installation
The IPOE-E174 can be easily installed by way of Plug and Play. It is used between a Power Source Equipment (PSE) and the PD. The IPOE-E174 injects power to the PD without affecting the data transmission performance. The IPOE-E174 offers a cost-effective and quick solution to doubling the standard range of PoE from 100 to 200 meters. The IPOE-E174 is designed in a compact box containing 5 RJ45 ports, of which 1 "PoE IN" port functions as PoE
(Data and Power) input and 4 "PoE OUT" ports on the other side functions as PoE (Data and Power) output. The "PoE OUT" port is also the power injector where DC voltage is transmitted over Cat. 5/5e/6 cable, and data and power are simultaneously transferred between the PSE and PD.
2
IPOE-E174
Applications
One Power Source for Multi Powered Devices
Is 100-meter cable long enough for a wide range of IP surveillance deployments? The answer is certainly not. To achieve the benefits of IP surveillance where IP cameras are installed in a remote location, PLANET IPOE-E174 is very useful for expanding the network already set up without worrying about the cabling distance limitation. In contrast, the conventional networking does not have the flexibility of network expansion.
PoE
PoE
PoE
PoE
PoE
Ultra PoE In
PoE
Wireless AP
PoE
Standard to
Passive PoE
Converter
PoE
PoE
PoE
PoE
PoE
PoE
PoE Camera 1
PoE Camera 2
PoE Camera 3
1000BASE-T UTP with PoE
1000BASE-T UTP with Ultra PoE
PoE
PoE Cam
PoE Cam
PoE
IPOE-E174
PoE Cam
PoE
PoE
PoE
1000BASE-T UTP with PoE
The IPOE-E174 industrial 1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE Extender requires very little installation time and does not require any additional setup or programming by using standard RJ45 cable from power sourcing device, such as ultra PoE injector supplying ultra PoE power, to the IPOE-E174 and converting power for 4 powered devices that are IEEE 802.3af/at PoE standard compliant, meaning any additional power adapter for IP cameras and wireless access points is not necessary.
DC
Power
Ultra PoE Injector
Data
PoE
100 meters
PoE
PoE
100 meters
IPOE-E174
PoE 100 meters PoE 100 meters
Switch
DC
PoE
PoE
Power Line (DC)
1000BASE-T UTP
1000BASE-T UTP with PoE
1000BASE-T UTP with Ultra PoE
3
IPOE-E174
Specifications
Model
Hardware Specifications
Network Connector
Switch Architecture
MAC Address Table
Switch Fabric
Switch Throughput
Flow Control
Jumbo Frame
ESD Protection
Enclosure
Installation
Cable
Dimensions (W x D x H)
Weight
Power Consumption
LED Display
Power over Ethernet
PoE Standard
PoE Power
Power Pin Assignment
Compatible PoE Injectors
PoE Power Budget
Environment
Operating
Storage
IPOE-E174
PoE In Port
1 x 10/100/1000BASE-T Ethernet with ultra PoE “Data + DC” in, auto MDI/MDI-X, auto-negotiation RJ45 connector
PoE Out Port
4 x 10/100/1000BASE-T Ethernet with IEEE 802.3af/at PoE “Data + DC” out, auto MDI/MDI-X, auto-negotiation
RJ45 connector
Store-and-Forward switch architecture
2K MAC address table with auto learning function
10Gbps
7.44Mpps @ 64Bytes
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
9Kbytes
6KV DC
IP30 metal case
DIN rail kit and wall-mount ear
Twisted-pair cable :
10BASE-T: 2-pair UTP Cat. 3,4,5, up to 100 meters
100BASE-TX: 2-pair UTP Cat. 5, 5e up to 100 meters
1000BASE-T: 4-pair UTP Cat. 5e,6 up to 100 meters
32 x 85 x 135 mm
424g
4.1 watts/13.9 BTU (Power On)
64.7 watts/220.6 BTU (Full PoE loading without data transfers)
66.1 watts/225.4 BTU (Full loading with PoE function)
System: PWR (Green)
Power Input: 30W, 2-pair 802.3at PoE in (Green)
Power Input: 60W+, 4-pair 802.3bt, Ultra PoE or UPOE in (Green)
HPoE Power usage: 20W, 40W and 60W
PoE Input Port: PoE in (Orange)
PoE Input Port: LNK/ACT (Green)
Per PoE Output Port: LNK/ACT (Green)
Per PoE Output Port: PoE-in-Use (Orange)
PoE in Port
IEEE 802.3bt Higher Power over Ethernet end-span/mid-span PD class 4 PD
Per PoE Out Port
IEEE 802.3at Power over Ethernet Plus end-span PSE
IEEE 802.3af Power over Ethernet end-span PSE
PoE in Port
50~57V DC, max. 72 watts
Per PoE Out Port
44~55V DC, max. 30.8 watts
PoE in Port
1/2(-), 3/6(+); 4/5(+), 7/8(-)
Per PoE out Port
1/2(+), 3/6(-)
POE-171A-60
POE-171A-95
IPOE-171-60
IPOE-171-95
64 watts (max.) @ PoE Type 3 input (Ultra PoE input)
30 watts (max.) @ PoE Type 2 input (802.3at input)
15 watts (max.) @ PoE Type 1 input (802.3af input)
Temperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Temperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
4
IPOE-E174
Top View
Side View Rear View Side View Front View
PWR 30W 60W+
PoE Input
LNK
AC T
PoE
IN-Use
LNK
ACT
PoE IN
PoE Power Usage
20W 40W 60W
1
2
3
4
Mounting Kit
DIN-Rail Kit
Mounting Kit
Dimensions ( unit = mm )
Ordering Information
IPOE-E174 Industrial 1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE Extender
Related Products
POE-172
POE-E201
POE-E101
GSW-1222VUP
GS-4210-16UP4C
GS-4210-24UP4C
GS-5220-24UP4XV/GS-5220-24UP4XVR
GS-5220-24UP4X/GS-5220-24UP4XR
IGS-5225-4UP1T2S
UPOE-800G
UPOE-1600G
UPOE-2400G
Single-Port 10/100/1000Mbps Ultra PoE Injector (60 watts, internal PWR)
IEEE 802.3at Power over Gigabit Ethernet Extender
IEEE 802.3af Power over Ethernet Extender
8-Port 10/100/1000T Ultra PoE + 2-Port 10/100/1000T + 2-Port 1000X SFP Gigabit Ethernet Switch with LCD
PoE Monitor (380W)
16-Port 10/100/1000T Ultra PoE + 4-Port Gigabit TP/SFP Combo Managed Switch
24-Port 10/100/1000T Ultra PoE + 4-Port Gigabit TP/SFP Combo Managed Switch
L2+ 24-Port 10/100/1000T Ultra PoE + 4-Port 10G SFP+ Managed Switch with LCD touch screen
L2+ 24-Port 10/100/1000T Ultra PoE + 4-Port 10G SFP+ Managed Switch
Industrial L2+ 4-Port 10/100/1000T Ultra PoE + 1-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
8-Port Gigabit 60W Ultra PoE Managed Injector Hub (400W)
16-Port Gigabit 60W Ultra PoE Managed Injector Hub (600W)
24-Port Gigabit 60W Ultra PoE Managed Injector Hub (800W)
PLANET Technology Corporation
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231,
Taiwan (R.O.C.)
Tel: 886-2-2219-9518
Email: [email protected]
Fax: 886-2-2219-9528 www.planet.com.tw
IPOE-E174v2
PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of their respective owners. Copyright © 2017 PLANET Technology Corp. All rights reserved.
5
