DATASHEET

This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machinereadable form without the prior written consent of Hatteland Technology

AS. The products may not be copied or duplicated in any way.

Manufacturer: Hatteland Display AS

Product:

Type:

17.0 inch Maritime Multi Display (MMD)

Sunlight Readable - High Bright model

HD 17T21 MMD-xxx-FHxx

Last Revised: 08 Aug 2019

Revision#: 14

17.0 inch Maritime Multi Display - Series X

Features:

Sunlight Readable / High Bright Series X Displays offer the ultimate in performance, convenience, state of the art design and enduring quality for system integrators and boat builders. Series X products offer a range of feature sets optimized for varying requirements and applications.

The Series X display range is a flexible monitor solution designed and type approved for the professional maritime segment, where reliability and long life time are key prerequisites for the industry. The product range combines stunning design and technology with innovative features and options, making it all that the integrator needs for top class type-approved marine systems.

The multi-input MMD models provide a wide choice of display size and format for a multitude of shipboard applications, where combining data and video inputs to a single unit provides maximum flexibility. Be it for ship navigation, automation or security, this range with all it's possible options provides a robust and multipurpose platform from which to display and manage data and multiple camera or sensor videos.

Series X displays feature Glass Display Control, LED Backlight Technology, full dimming and multipower as standard, and can also accomodate and combine options such as multi-touch screen and ECDIS calibration. By factory standards the 17 inch unit is ECDIS Compliant.

FRONT VIEW SIDE VIEW BACK VIEW

BOTTOM VIEW

TOP VIEW

PANEL CUT OUT

Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm. For accurate measurements, check relevant DWG fi le.

Hatteland Technology AS | www.hattelandtechnology.com | Enterprise no: NO974533146

1/2

SPECIFICATIONS

Note: All specifi cations are subject to change without prior notice!

Please visit www.hattelandtechnology.com for the latest electronic version.

TFT Technology:

• High Quality TFT with LED Backlight Technology

• Sunlight Readable / High Bright (includes Optical Bonding Technology)

• 17.0 inch viewable image size, Aspect Ratio 5:4

• TFT active-matrix liquid crystal panel

TFT Characteristics:

• Native Resolution

• Pixel Pitch (RGB)

• Response Time

• Contrast Ratio

: 1280 x 1024

: 0.264 (H) x 0.264 (V) mm

: 5ms (typical), “black” to “white”

: 1000:1 (typical)

• Light Intensity : 1000 cd/m² (typical)

• Viewable Angle @ CR>10 : +/- 85° (Down/Left/Right), 60° (Up) (typ)

• Active Display Area

• Max Colors

: 337.92 (H) x 270.336 (V) mm

: 16.7 million

Synchronization:

• Digital separate synchronization

• Composite synchronization

• Synchronization on green

• Auto detects VGA -> SXGA, interlaced and non interlaced

• Video Signal : Analog RGB 0,7Vp-p

: Input Impedance 75 Ohm

Synchronization Range:

• Horizontal

• Vertical

: 31.5 kHz to 91.1 kHz

: 60 Hz* to 85 Hz

* Recommended for optimal picture quality

Supported Signals:

Resolutions:

• VGA

• SVGA

• XGA

• SXGA

: 640 x 480 (including 640 x 350)

: 800 x 600 (including 720 x 400)

: 1024 x 768

: 1280 x 1024*

* Recommended for optimal picture quality

Video Signals:

• Interlaced HDTV, NTSC, PAL and SECAM video

• Composite video

Power Specifications:

Multi-power Supply:

• 115&230VAC - 50/60Hz + 24 VDC - HD 17T21 MMD-Mxx-FHxx

Note: You may connect either AC power or DC power or both. In case both sources are connected, power will be sourced from the AC input. If AC input is lost, there will be a uninterrupted switch-over to DC input.

Power Consumption:

• Operating : 59W (typ) - 120W (max)

Physical Considerations:

• W:390.00 [15.35''] x H:351.00 [13.82''] x D:80.50 [3.17''] mm [inch]

• 4 x M6 VESA mounting 280x150mm, Max 12mm deep

• Weight: 6.2kg / 13.6lbs

• Delivery includes an EPDM sealing gasket for IP66 console mount.

Signal Terminals:

• DVI-D Signal IN : 2 x 24p DVI (female)

• RGB Signal IN : 2 x 15p HD D-SUB (female)

• Comp. Video IN : 3 x BNC Connector (female)

• SCOM RS-422/485 : 1 x 5-pin Terminal Block 3.81, non-isolated+Buzzer

• RGB Signal OUT : 1 x 15p HD D-SUB (female) - Clone of RGB IN*

• If Touchscreen

• Ethernet

• SCOM RS-232

• Potmeter

• AC Power IN

• DC Power IN

: 1 x USB TYPE A Connector (female)

: 1 x RJ45 Connector for Remote Control

: 1 x 9p D-SUB (female) non-isolated+Buzzer

: 1 x 9p D-SUB (male)

(Potentiometer IN, +5VDC OUT, BRT +/- IN)

: 1 x Std IEC Inlet

: 1 x 2-pin Terminal Block 5.08

* Tested at recommended resolutions. The RGB output signal is at same resolution and sync as the RGB input. The output is working even if the display unit is turned off, but power cable/supply must be connected/provided.

User Controls:

Behind front bezel - Glass Display Control™ (GDC) IP66:

• Power On/Off, On Screen Display Menu, Brightness Control (-/+)

• Hotkeys (left/right), Mode Status Indicators (ECDIS, Service)

• Buzzer (not visible), Light Sensor (not visible)

Environmental Considerations:

• Operating

• Storage

• IP Rating

: Temperature -15 deg. C to +55 deg. C

- Humidity up to 95%

: Temperature -20 deg. C to +60 deg. C

- Humidity up to 95%

: Protection: IP66 front - IP22 rear (EN60529)

Lifetime Considerations:

Even though the test conditions for bridge units provide for a maximum operating temperature of 55°C, continuous operation of all electronic components should, if possible, take place at ambient temperatures of only

25°C. This is a necessary prerequisite for long life and low service costs.

Available Accessories:

• HD CMB SX1-A2 : 1 x Console Mount Kit (1-12.75mm). EN60945 Tested

• HD CMB SX1-A3 : 1 x Console Mount Kit (1-12.75mm). EN60945 Tested

Long screws for easier installation in tight spaces.

• HD TMB SX1-B1 : 1 x Table Mount Bracket. EN60945 Tested

• HD VED SX1-A1 : 1 x VESA Bracket, not EN60945 Tested

• HD REM SX1-A1 : 1 x External Remote Control, EN60945 Tested

• HD 17COV SX1-A1 : 1 x UV Sun Cover

Please see user manual/datasheet for more information

Factory Options:

• Projected Capacitive Touch Screen (Multitouch, USB interface)

• Color Calibrated models (ECDIS)

Compass Safe Distance: HD 17T21 MMD-xxx-FHxx Standard: 125cm Steering: 75cm

A P P R O V A L S & C E R T I F I C A T E S

IEC 60945 4th

GL

(EN 60945:2002)

- Germanischer Lloyd

CCS - China Classification Society

EU RO MR - Mutual Recognition

This product have been tested / type approved by the following classification societies:

DNV - Det Norske Veritas

IACS E10

BV - Bureau Veritas

ClassNK - Nippon Kaiji Kyokai

ABS - American Bureau of Shipping

LRS - Lloyd’s Register of Shipping

2/2